Best Jack For Tandem Axle Trailer: 8 Options Compared

#1 · Best Overall

1. Andersen Hitches Rapid Jack

• Load Capacity: 30000 lb
• Material: Plastic
• Weight: 2 lb

Best for: Multi-use RV tire changer.

Why it ranks #1: Its ramp raises the opposite tire without a floor jack, carries a listed 30,000 pounds, and doubles as a chock, jack post block, and stabilizer pad.

The Andersen Hitches Rapid Jack combines a drive-on tire changer, wheel chock, jack-post block, and stabilizer pad in one compact unit. Its listed 30,000-pound capacity and ramp-style operation let tandem-axle owners lift one tire by driving the adjacent axle tire onto the tool, without a floor jack.

For a tire change, the Rapid Jack uses the adjacent axle tire as the ramp contact: driving that tire onto the tool lifts the opposite tire off the ground. This workflow avoids a floor jack, while the same unit can serve as a wheel chock, jack-post block, or stabilizer pad at other times. Its 18 x 7 x 6.5-inch dimensions and two-pound weight support compact storage, and the listing specifies a 30,000-pound capacity.

Skip it if you need a pair of ramps supplied together; the Tlaleikejia tandem wheel ramp is listed as a two-pack.

RV and trailer owners seeking one compact tool for tire changes and several support tasks should consider the Rapid Jack. Its tire-changing method relies on raising the adjacent axle tire onto the unit.

Listed on Amazon as: Andersen Hitches Single Rapid Jack Trailer Tire Changer and Multi-Use Jack Block 30000 lb Capacity

#2 · Best Steel Tandem Ramp

2. High Country Plastics Trailer Helper

• Load Capacity: 18 lb
• Material: Steel
• Weight: 17 lb

Best for: Horse-trailer flat-tire ramp.

Why it ranks #2: The steel, powder-coated ramp is expressly described for most tandem-axle trailers and intended for two- and three-horse trailers.

The steel, diamond-plate Trailer Helper provides a ramp-style alternative to changing a flat on most tandem-axle trailers. Its intended use on two- and three-horse trailers makes it a focused option for equestrian hauling, while the built-in carrying handle helps with moving the 32-inch tool between storage and roadside use.

Rather than a tongue-mounted jack, this medium-duty helper is used as a tire-changing aid for tandem axles, which suits a roadside flat on many horse trailers. Its steel construction and powder-coated diamond-plate finish provide a durable metal ramp surface, while the built-in handle makes the 32 x 7.25 x 6-inch tool easier to carry. The listing identifies two- and three-horse trailers as its intended application, so buyers with other trailer types should consider that stated scope.

Skip it if you need a tongue-mounted jack or a ramp with a stated lift height; this listing provides neither specification.

Horse owners seeking a portable, steel ramp-style aid for tandem-axle flat changes should consider the Trailer Helper. Its stated fit is medium-duty two- and three-horse trailers, so buyers with other applications should weigh that limitation.

Listed on Amazon as: Trailer Helper Steel Trailer Jack – Flat Tire Ramp – Dimensions 32 inches x 7.25 inches x 6 inches – Weight 18 Pounds

#3 · Best Two-Ramp Set

3. Tlaleikejia Tandem Wheel Ramp

• Load Capacity: 20000 lb
• Material: Plastic, Polymer
• Weight: 12.5 lb

Best for: Two-piece tandem ramp set.

Why it ranks #3: This listing includes two tandem wheel ramps, a stated 20,000-pound capacity, and 5.5 inches of tire lift for tandem flat changes.

This Tlaleikejia set pairs two tandem-wheel ramps with a stated 20,000-pound capacity and 5.5-inch tire lift. Driving onto a ramp raises the tire without a traditional jack, making the format relevant for tandem dual-axle trailer tire changes where a drive-on approach fits the situation.

The drive-on method is the central workflow: the listing says the ramps elevate a tire 5.5 inches, eliminating the need for a traditional jack during a tandem-wheel change. A two-pack provides a pair of ramps, and the stated 20,000-pound capacity offers a load figure for buyers assessing their trailer setup. Each ramp measures 24 x 8.47 x 7.1 inches and weighs 12.5 pounds, details that matter when planning storage and handling.

Skip it if you need a tongue-mounted jack or cannot move the trailer onto a ramp; this set uses a drive-on tire-lifting method.

Tandem-trailer owners wanting a two-ramp drive-on aid and a stated 5.5-inch lift should consider this set. Its method depends on driving onto the ramp, so it is not a tongue-support jack.

Listed on Amazon as: 2 Pack 20000lbs Tandem Wheel Ramp, Concave Portable Ramp, Heavy Duty Tire Changing aid on Tandem Dual Axle Trailer, 5.5in Tire Lift Trailer Wheel Jack RV Flat Tire Ramp (2)

#4 · Best With Carry Bag

4. ROBLOCK Tandem Tire Ramp

• Load Capacity: 3.5E+4 lb
• Material: Plastic
• Weight: 2.41 kg

Best for: Solo tandem-tire changes.

Why it ranks #4: Designed for tandem dual wheels, its ramp lifts a tire up to 6.3 inches and includes chocks and a carry bag according to the title.

The ROBLOCK ramp is listed to raise a tandem-trailer tire up to 6.3 inches, giving drivers a way to change a tire without using a jack or unloading the trailer. Its chocks, anti-slip mats, and gear-mesh design target stable tire positioning, while the carry bag supports taking the single ramp along on trips.

For tandem-wheel emergencies, the ramp-and-chock format can simplify the workflow: the listing says one person can replace a tire without unloading the trailer or using a jack. Precise gear mesh and anti-slip mats are intended to keep the ramp and tire tightly engaged for support. The stated maximum tire lift is 6.3 inches, and the carry bag offers a way to store and transport the one-pack unit. The plastic construction is a consideration for buyers choosing between ramp materials.

Skip it if you need a steel ramp or a stated two-ramp set; the ROBLOCK package is listed as one plastic ramp.

Choose this for tandem-trailer owners who value a jack-free tire-change approach and a carry bag for trips. Its 6.3-inch stated lift and single-ramp package are the relevant boundaries when assessing your needs.

Listed on Amazon as: ROBLOCK Tandem Trailer Tire Change Ramp, Tire Lifts Up to 6.3", Raised Tire Change Ramp for Trailers Campers, RV Leveling Blocks with Chocks, Carry Bag, Dual Axle Tandem Wheel Aid,1 Pack

#5

5. EASY-UP Steel Trailer Jack

• Material: Steel
• Weight: 15.7 lb

Best for: Equine torsion-axle tire aid.

Why it ranks #5: The steel tire-change aid lifts 4.25 inches and is stated to hold 7 tons on torsion axles or 4 tons on leaf-spring axles.

The EASY-UP steel jack lifts a trailer tire 4 1/4 inches and is rated to hold seven tons on torsion axles, giving horse-trailer owners a purpose-specific flat-changing aid. Its carrying handle helps with transport, and the listing says tire changes can be made without unloading horses.

The stated axle distinction matters: EASY-UP lists seven tons for torsion axles and four tons for leaf-spring axles, giving buyers specific ratings to consider before choosing it. Its 4 1/4-inch lift is intended to create tire-removal clearance, while the steel construction and functional carrying handle support use and handling around horse trailers. The listing also frames it for changing a flat without unloading horses, a practical benefit for equestrian travel situations.

Skip it if you need more than 4 1/4 inches of tire lift; the Tlaleikejia tandem wheel ramp lists a 5.5-inch lift.

Horse owners seeking a steel tire-changing aid, especially for a torsion-axle trailer, may appreciate its axle-specific ratings and carrying handle. Check the listed axle rating and 4 1/4-inch lift against your application.

Listed on Amazon as: EASY-UP Steel Trailer Jack for Horses | Industry-Leading Durability | 4 1/4" Lift for Easy Tire Change | Holds up to 7 Tons | Must-Have for Safe Hauling

#6 · Best Swivel Jack Capacity

6. KYX Boat Trailer Jack

• Load Capacity: 2200 lb
• Material: Carbon Steel

Best for: Boat-trailer tongue support.

Why it ranks #6: This conventional swivel jack lists a 2,200-pound capacity and 10.2 inches of vertical lift, but is not a tandem tire-change ramp.

A 2,200-pound capacity and 10.2 inches of vertical lift give the KYX swivel jack a defined role in supporting a trailer tongue. Its six-inch dual polypropylene wheels are specified for stability and movement across mud, sand, and gravel, making it a distinct option from a tandem tire-change ramp.

The KYX is a swivel trailer jack, not a drive-on tandem-axle tire ramp, so its stated job is trailer support rather than lifting an adjacent wheel for a flat change. Its 2,200-pound capacity and 10.2-inch vertical lift provide measurable limits for buyers checking their trailer needs. Six-inch dual PP wheels are described as adding stability and helping prevent sinking in mud, sand, and gravel. Carbon-steel construction and corrosion-resistant marine-grade features suit the listed boat-trailer application.

Skip it if you need a tandem tire-change ramp; this is a swivel tongue jack, while the ROBLOCK 577 is listed as a tandem tire ramp.

Boat-trailer owners seeking a swivel jack with dual wheels and 10.2 inches of lift may find this a suitable support option. It is not the right format for a drive-on tandem-axle flat-tire change.

Listed on Amazon as: KYX Boat Trailer Jack, 2200 lbs Swivel Trailer Jack with 6" Dual Wheels

#7

7. FZZD Weld-On Tongue Jack

• Load Capacity: 8000 lb
• Material: Alloy Steel
• Weight: 27 lb

Best for: High-capacity welded tongue jack.

Why it ranks #7: Its listed 8,000-pound capacity is substantial for a tongue jack, but the weld-on mounting and tongue-support design do not directly lift a tandem wheel.

With an 8,000-pound lifting capacity, the FZZD swivel jack addresses heavier trailer-tongue support needs than a tire-change ramp. Its weld-on pipe mount anchors it to the tongue, and the jack can swivel horizontally for storage, giving buyers a space-conscious setup once the trailer is ready for travel.

The FZZD is a tongue jack rather than a ramp that lifts one tandem tire by raising the adjacent wheel. Its 8,000-pound capacity is paired with an alloy-steel body, making the listed load rating and material relevant when selecting a support jack. The longer textured side handle is specified for grip and control during lifting. Installation requires welding the pipe mount to the trailer tongue; after use, the jack swivels horizontally along the tongue for storage.

Skip it if you need a removable ramp for a tandem flat; the Andersen Hitches Rapid Jack serves as a drive-on tire changer.

Consider this for a trailer owner needing high-capacity tongue support and space-saving swivel storage. The weld-on mount is a key fit consideration, and its role is tongue lifting, not tandem-wheel tire changing.

Listed on Amazon as: FZZD 8000 lbs Swivel Trailer Jack, Weld-On Pipe Mount Tongue Jack

#8

8. SEHNSUCHT Bolt-On Tongue Jack

• Load Capacity: 2000 lb

Best for: Swing-back tongue-jack buyers.

Why it ranks #8: This swivel bolt-on jack offers 10 inches of travel and a 2,000-pound dynamic lift, but it supports the trailer tongue rather than changing a tandem tire.

The SEHNSUCHT jack provides 10 inches of vertical travel and swings back for storage, giving trailer owners an adjustable tongue-support option that retracts to 15 inches for towing. Its bolt-on bracket is listed for trailer tongues from 2.07 to 5.06 inches, defining an important installation fit range.

This is a bolt-on swivel tongue jack, not a tandem tire-changing ramp. Its 2,000-pound dynamic lift and 3,000-pound static lift distinguish operating and parked support figures, while the 10-inch travel provides adjustment between a 15-inch retracted height and 25-inch extension. The swing-back bracket is specified for tongues 2.07 to 5.06 inches wide, so measuring against that range matters before installation. Its handle supports manual operation without a powered setup being specified.

Skip it if you need a ramp to lift a tandem tire; the KYX BTJ002 is a swivel jack too, so choose a tire-ramp format instead.

Choose this for trailer owners needing adjustable tongue support and swing-back storage, provided the tongue falls within its listed width range. It is not a drive-on aid for tandem-axle flat changes.

Listed on Amazon as: 2000lb Trailer Jack, Swivel Bolt-on Jack for 2.07in to 5.06in Trailer Tongues, 10" Vertical Travel with Handle for RV, Equine and Boat Trailers