A strong in-tank fuel pump for an LS swap delivers fuel at the pressure and flow your EFI setup requires, while fitting the tank or hanger you plan to use. For a GM TBI conversion, the Lanotech pump is a focused choice because it is described as a drop-in replacement for 1982–1995 GM TBI vehicles and specifies 58 PSI for LS swaps. Square Body truck builders should also consider the AuHydraXel assembly, which lists fitment for 1973–1991 Chevy and GMC trucks.
Other options here are universal-style pumps or assemblies tied to a particular vehicle, so a high LPH figure alone does not establish compatibility. Confirm tank, hanger, fuel type, pressure, and wiring requirements before ordering; the product details do not establish fitment for every LS-powered vehicle.
The Lanotech 58PSI Pump is the strongest match for a GM TBI-based LS swap because it is described as a direct drop-in for 1982–1995 GM TBI vehicles and specifies 58 PSI for LS engines. It includes a strainer, tank seals, and clamps, though the fuel filter is not included. For a Square Body truck, the AuHydraXel LS Swap Assembly is a more targeted fitment option.
Confirm the exact tank and hanger before choosing either product.
Our Top Picks
Best OverallIts listing specifically targets LS swaps at 58 PSI and describes a direct drop-in fit for 1982–1995 GM TBI vehicles, with seals and strainer included.
View on Amazon
Square Body FitIt names 1973–1991 Chevy and GMC Square Body trucks and LS/LT swaps; the listing describes a 450 LPH pump, though fitment should be verified.
View on Amazon
Camaro ReplacementThis 340 LPH assembly is described for LS swaps and directly replaces the pump and hanger in 1982–1992 Camaros while retaining the stock outlet location.
View on Amazon- Ethanol Compatible AEM 50-1200 E85 Pump
- Highest Listed Flow DeatschWerks 9-403-1047
Compare In-Tank Pump Options and Fitment
| # | Product | Compatible with Vehicle Type | Body Material | Operation Mode | Buy |
|---|---|---|---|---|---|
| 1 | 1. Lanotech 58PSI PumpBest Overall | Car, Truck, Van | — | Mechanical | View on Amazon |
| 2 | 2. AuHydraXel LS Swap AssemblySquare Body Fit | Truck | Aluminum | Automatic | View on Amazon |
| 3 | 3. Aeromotive 18073 AssemblyCamaro Replacement | Car | Metal | Electric | View on Amazon |
| 4 | 4. AEM 50-1200 E85 PumpEthanol Compatible | High performance naturally aspirated and… | Alloy Steel | Mechanical | View on Amazon |
| 5 | 5. DeatschWerks 9-403-1047Highest Listed Flow | Car, Truck | Plastic | Mechanical | View on Amazon |
| 6 | 6. AEM 50-1000 PumpUniversal in-tank installers | Gasoline-powered vehicles | Alloy Steel | Automatic | View on Amazon |
| 7 | 7. EVIL ENERGY 255LPH PumpEFI pump kit builders | Car | Aluminum | Automatic | View on Amazon |
| 8 | 8. DeatschWerks 9-201-0791Ethanol-compatible 255 LPH swaps | Car | Plastic | Automatic | View on Amazon |
Detailed Reviews: Best In Tank Fuel Pump For Ls Swap 2

#1 · Best Overall
1. Lanotech 58PSI Pump
- Compatible with Vehicle Type: Car, Truck, Van
- Operation Mode: Mechanical
Best for: GM TBI drop-in LS upgrades.
Why it ranks #1: Its listing specifically targets LS swaps at 58 PSI and describes a direct drop-in fit for 1982–1995 GM TBI vehicles, with seals and strainer included.
A stated 58 PSI output for LS-series engines meets the central requirement this Lanotech pump identifies for a GM TBI LS swap. Its direct-drop-in approach covers 1982–1995 GM TBI vehicles and specifies no cutting or splicing or hanger modifications, keeping the factory-pump replacement workflow in focus.
The pump is described as a direct replacement for the factory pump in 1982–1995 GM TBI vehicles, with no cutting, splicing or changes to the existing hanger required. That can keep the conversion centered on the original pump location rather than a modified hanger. Lanotech specifies 58 PSI for Gen III and Gen IV small-block LS engines. The included strainer, tank seals and stainless-steel clamps provide listed replacement parts, but a fuel filter is explicitly not included, so that item must be handled separately in the fuel-system plan.
- Specified 58 PSI output for LS-series engines
- Direct-drop-in replacement for 1982–1995 GM TBI vehicles
- No cutting, splicing or hanger modifications required
- Includes strainer, tank seals and stainless-steel clamps
- Fuel filter is not included.
Skip it if you need an included fuel filter; the AEM 50-1200 kit lists a pre-filter among its components.
For an owner converting a 1982–1995 GM TBI vehicle to a Gen III or Gen IV LS engine, the stated 58 PSI and drop-in installation approach are directly relevant. Account for the separately sourced fuel filter.
Full product details
| Brand | Lanotech |
|---|---|
| Compatible with Vehicle Type | Car, Truck, Van |
| Included Components | 1 x Fuel Pump, 1 x Strainer, Tank Seals, Stainless-Steel Clamps (Fuel Filter Not Included) |
| Manufacturer | Lanotech |
| Part Number | LA-360700F-pump |
| Manufacturer Warranty Description | Lifetime warranty |
| Model Number | LA-360700F-pump |
| Operation Mode | Mechanical |
| Product Style | Direct Fit |
| Style | Direct Fit |
Listed on Amazon as: 58PSI High Flow Fuel Pump for 82-95 GM TBI LS Swap (Pump Only)
View on Amazon
#2 · Square Body Fit
2. AuHydraXel LS Swap Assembly
- Compatible with Vehicle Type: Truck
- Body Material: Aluminum
- Operation Mode: Automatic
Best for: Square Body truck conversions.
Why it ranks #2: It names 1973–1991 Chevy and GMC Square Body trucks and LS/LT swaps; the listing describes a 450 LPH pump, though fitment should be verified.
A 450 LPH pump in an assembly listed for 1973–1991 Chevy and GMC Square Body trucks targets high-flow LS/LT conversions. Its application spans C10, K10, C20, K20, C30 and K30 models, with selected Suburban and Blazer fitments also noted, so truck-specific compatibility leads the decision.
The assembly is identified for 1973–1991 Chevy and GMC C/K trucks, with certain Suburban and Blazer models included, giving a truck swap builder a more directed starting point than a universal pump. Its 450 LPH pump is specified for LS/LT swap and EFI conversion projects, including selected LS1, LS3, LS7, LT1 and L86 applications. The listing also names gasoline and E85, allowing fuel choice to be considered alongside the engine conversion. Fitment still requires checking because the described compatibility is not universal across every vehicle in those lines.
- 450 LPH electric pump
- Application includes 1973–1991 Chevy and GMC C/K Square Body trucks
- Listed for LS/LT swaps and EFI conversions
- Description names gasoline and E85 compatibility
- Fitment includes only certain Suburban and Blazer models, not every example.
Skip it if you need a replacement for a 1982–1992 Camaro; the Aeromotive 18073 is listed for that stock-tank application.
For a Square Body C/K owner planning an LS or LT EFI conversion, the 450 LPH assembly and named gasoline/E85 use are relevant strengths. Check the exact truck or selected Suburban and Blazer fitment before choosing it.
Full product details
| Brand | AuHydraXel |
|---|---|
| Body Material | Aluminum |
| Compatible with Vehicle Type | Truck |
| Included Components | Fuel Pump Assembly |
| Manufacturer | AuHydraXel |
| Part Number | 450LPH LS Swap Fuel Pump Assembly |
| Manufacturer Warranty Description | 1 YEARS |
| Model Number | 450LPH LS Swap Fuel Pump Assembly |
| Operation Mode | Automatic |
Listed on Amazon as: 255LPH LS Swap Fuel Pump Assembly for 73-91 Chevy GMC C/K Trucks LS/LT
View on Amazon
#3 · Camaro Replacement
3. Aeromotive 18073 Assembly
- Compatible with Vehicle Type: Car
- Body Material: Metal
- Operation Mode: Electric
Best for: Stock-tank Camaro LS swaps.
Why it ranks #3: This 340 LPH assembly is described for LS swaps and directly replaces the pump and hanger in 1982–1992 Camaros while retaining the stock outlet location.
A factory-location hanger assembly and 340 LPH output make the Aeromotive 18073 a focused option for 1982–1992 Camaro LS swaps. Its direct-replacement layout retains the stock outlet location and seal, enabling a higher-flow EFI setup while using the specified Camaro tank arrangement.
The pre-assembled pump and hanger replace the OEM assembly in the factory tank location, which can simplify the conversion compared with assembling separate in-tank components. Retaining the stock outlet location and seal also preserves the factory connection points. Aeromotive lists up to 340 LPH for EFI and LS-swap applications, giving performance builds a high-flow pump in a Camaro-specific package. The fit is narrowly defined: the verified application is 1982–1992 Chevrolet Camaro models using the stock in-tank fuel tank.
- Up to 340 LPH output for EFI and LS-swap applications
- Direct replacement for the 1982–1992 Camaro OEM pump and hanger
- Installs in the factory tank location
- Retains stock fuel outlet location and seal
- Fitment is limited to 1982–1992 Camaro stock in-tank fuel systems.
Skip it if you are converting a Square Body Chevy or GMC truck; the AuHydraXel assembly lists those truck applications.
For a 1982–1992 Camaro owner seeking an in-tank LS-swap pump, this pre-assembled hanger offers a factory-location replacement and 340 LPH capacity. Keep its stock-tank Camaro fitment boundary in mind.
Full product details
| Brand | Aeromotive |
|---|---|
| Body Material | Metal |
| Compatible with Vehicle Type | Car |
| Included Components | Stealth 340 Fuel Pump Assembly 82-92 Camaro |
| Inlet Connection Size | 0.5 inches |
| Item Dimensions | 17.5 x 8.5 x 8.5 inches |
| Item Weight | 3.2 pounds |
| Dimensions | 17.5 x 8.5 x 8.5 inches |
| Manufacturer | Aeromotive |
| Part Number | 18073 |
| Manufacturer Warranty Description | 12 month |
| Material | 100% Aeromotive |
| Model Number | 18073 |
| Operation Mode | Electric |
| Outlet Connection Size | 0.38 inches |
| Product Style | Modern |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Aeromotive 340LPH Fuel Pump Assembly for 1982-1992 Camaro – In-Tank – 18073
View on Amazon
#4 · Ethanol Compatible
4. AEM 50-1200 E85 Pump
- Compatible with Vehicle Type: High performance naturally aspirated and…
- Body Material: Alloy Steel
- Operation Mode: Mechanical
Best for: E85 and methanol EFI builds.
Why it ranks #4: It flows 340 LPH at 40 PSI and is tested for ethanol fuels up to E100 and methanol up to M100, but is not a vehicle-specific assembly.
Compatibility tested up to E100 ethanol and M100 methanol sets the AEM 50-1200 apart for alcohol-fuel EFI conversions. Its 340 LPH flow at 40 PSI and compact 39 mm diameter give builders concrete output and packaging details to assess for a high-output naturally aspirated or forced-induction setup.
AEM lists 340 LPH at 40 PSI, a specific flow point that helps a builder compare pump output with system demands. The 39 mm diameter is described as fitting most applications, while an offset inlet is noted as easing installation. The kit includes a pre-filter, hose, clamps, rubber sleeve, end caps and flying lead, reducing the need to source those listed pieces separately. Its compatibility with gasoline, ethanol up to E100 and methanol up to M100 makes fuel choice a key reason to consider it.
- Tested to flow 340 LPH at 40 PSI
- Compatible with ethanol up to E100 and methanol up to M100
- 39 mm diameter fits most applications
- Kit includes pre-filter, hose, clamps and flying lead
- The 39 mm pump is not stated to fit every application.
Skip it if you only need a pump for a 1982–1992 Camaro stock hanger; the Aeromotive 18073 is listed as a direct replacement.
For a naturally aspirated or forced-induction EFI LS build using ethanol or methanol, the fuel compatibility and 340 LPH rating make this a relevant option. Its compact size helps with packaging, but application fit still matters.
Full product details
| Brand | AEM |
|---|---|
| Body Material | Alloy Steel |
| Compatible with Vehicle Type | High performance naturally aspirated and forced induction EFI vehicles |
| Included Components | Kit includes fuel pump; rubber sleeve; end caps; pre-filter; hose; clamps and flying lead |
| Inlet Connection Size | 39 millimeters |
| Item Dimensions | 2.76 x 2.76 x 5.51 inches |
| Item Weight | 354 g |
| Dimensions | 2.76 x 2.76 x 5.51 inches |
| Manufacturer | AEM |
| Part Number | 50-1200 |
| Manufacturer Warranty Description | 1 year |
| Material | Plastic |
| Model Number | 50-1200 |
| Operation Mode | Mechanical |
| Product Style | Gerotor |
Listed on Amazon as: AEM 50-1200 E85 In-Tank Fuel Pump, Black, 4.055 x 1.535 x 1.535 inches
View on Amazon
#5 · Highest Listed Flow
5. DeatschWerks 9-403-1047
- Compatible with Vehicle Type: Car, Truck
- Body Material: Plastic
- Operation Mode: Mechanical
Best for: High-flow PWM pump setups.
Why it ranks #5: Its 415 LPH rating and included installation kit may suit higher-flow builds; the listing does not identify an LS-specific vehicle fitment.
A 415 LPH rating, PWM-driver compatibility and ethanol-compatible construction give the DeatschWerks 9-403-1047 a high-output feature set for demanding fuel systems. Its turbine impeller is described as quiet and reliable, while the included 9-1047 installation kit supplies a pump-specific installation component.
DeatschWerks says the pump works with pulse-width-modulated pump drivers, which is useful when the fuel system uses that control method. Carbon commutators and fully encapsulated armatures are specified for ethanol compatibility, connecting its construction to alcohol-fuel use. The high-torque motor is described as maintaining flow at higher pressure, a relevant consideration as system pressure rises. At 415 LPH, it offers a much higher listed flow than a 255 LPH pump, but the supplied details do not name a specific LS-swap vehicle application.
- 415 LPH flow rating
- Compatible with pulse-width-modulated pump drivers
- Carbon commutators and encapsulated armatures support ethanol compatibility
- High-torque motor is described as maintaining flow at higher pressure
- The supplied details do not identify a specific LS-swap vehicle application.
Skip it if you need a truck-specific Square Body LS assembly; the AuHydraXel 450LPH assembly lists Chevy and GMC C/K applications.
For a high-output fuel system using PWM control or ethanol, this pump’s stated driver compatibility, construction and 415 LPH rating are relevant. Its listing lacks a named LS-swap vehicle application, so platform fit must be established separately.
Full product details
| Brand | Deatsch Werks |
|---|---|
| Body Material | Plastic |
| Compatible with Vehicle Type | Car, Truck |
| Included Components | DeatschWerks 9-403-1047 In-Tank Fuel Pump (415lph with 9-1047 Install Kit), 1 Pack |
| Item Dimensions | 6 x 3 x 4 inches |
| Dimensions | 6 x 3 x 4 inches |
| Manufacturer | DeatschWerks |
| Part Number | 9-403-1047 |
| Manufacturer Warranty Description | Warranty |
| Material | Plastic |
| Model Number | 9-403-1047 |
| Operation Mode | Mechanical |
| Product Style | Gerotor |
Listed on Amazon as: DeatschWerks 9-403-1047 in-Tank Fuel Pump (415lph with 9-1047 Install Kit), 1 Pack
View on Amazon
#6
6. AEM 50-1000 Pump
- Compatible with Vehicle Type: Gasoline-powered vehicles
- Body Material: Alloy Steel
- Operation Mode: Automatic
Best for: Universal in-tank installers.
Why it ranks #6: This in-tank pump includes a pre-filter, hose, clamps, and flying lead, but the supplied details give no flow figure or LS-specific fitment.
The AEM 50-1000 arrives with a pre-filter, hose, clamps, rubber sleeve, end caps and flying lead, giving an installer several pieces for an in-tank pump setup in one kit. Its listing identifies gasoline-powered vehicles, but supplies no flow figure here to size an LS swap by output.
The included sleeve and end caps can help position and support the pump within an in-tank arrangement, while the hose, clamps and flying lead supply associated installation pieces. A pre-filter is also included, so filtration at the pump inlet is part of the kit. AEM lists an 8 mm outlet connection and automatic operation, details that inform plumbing and system planning. However, the supplied specifications do not state a flow rate or a specific LS-swap application, so this listing alone cannot establish output suitability for a particular engine build.
- Kit includes fuel pump, rubber sleeve and end caps
- Includes a pre-filter
- Includes hose, clamps and flying lead
- Listed for gasoline-powered vehicles
- The supplied specifications give no fuel-flow rating for output sizing.
Skip it if you require a stated high-output figure for an LS swap; the AEM 50-1200 lists 340 LPH at 40 PSI.
For an installer seeking an in-tank kit with several mounting and connection pieces, the included pre-filter, hose and flying lead are useful details. Choose only after verifying the flow capacity required by your LS setup.
Full product details
| Brand | AEM |
|---|---|
| Body Material | Alloy Steel |
| Compatible with Vehicle Type | Gasoline-powered vehicles |
| Included Components | kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead |
| Item Dimensions | 6.4 x 3.2 x 2.8 inches |
| Item Weight | 1.1 pounds |
| Dimensions | 6.4 x 3.2 x 2.8 inches |
| Manufacturer | AEM |
| Part Number | 50-1000 |
| Manufacturer Warranty Description | 1 Year |
| Material | Plastic |
| Model Number | 50-1000 |
| Operation Mode | Automatic |
| Outlet Connection Size | 8 millimeters |
| Product Style | Gerotor |
Listed on Amazon as: AEM 50-1000 High Flow In-Tank Fuel Pump, Black, 4.055 x 1.535 x 1.535 inches
View on Amazon
#7
7. EVIL ENERGY 255LPH Pump
- Compatible with Vehicle Type: Car
- Body Material: Aluminum
- Operation Mode: Automatic
Best for: EFI pump kit builders.
Why it ranks #7: It is a 12V DC EFI pump rated at 255 LPH at 43 PSI, but its listing does not specify LS-swap or vehicle fitment.
A stated 255 LPH flow at 43 PSI gives the EVIL ENERGY in-tank pump a defined starting point for 12V DC EFI builds. Its operating range of 15–90 PSI lets buyers plan around a regulator-set final pressure, while the pump’s fuel restriction is explicit: gasoline only.
The listed flow changes with pressure: 255 LPH at 43 PSI and 190 LPH at 80 PSI. That distinction helps an EFI builder compare the pump’s output with the system’s intended operating pressure rather than relying on one headline figure. EVIL ENERGY specifies a 15–90 PSI operating range and says a regulator sets final fuel pressure. The stated application is 12V DC EFI and gasoline; the listing also warns that high-impurity fuel can reduce pump life and performance, making fuel cleanliness a relevant maintenance consideration.
- 255 LPH test flow at 43 PSI
- 190 LPH test flow at 80 PSI
- 15–90 PSI operating range with final pressure set by regulator
- Specified for 12V DC EFI systems
- The pump listing specifies gasoline only, not E85 or alcohol fuel.
Skip it if you need ethanol compatibility; the AEM 50-1200 is listed for ethanol up to E100 and methanol up to M100.
For a gasoline-fueled 12V EFI project, this pump’s pressure-specific flow figures and regulator-set pressure range help frame system planning. It is not the fit for an LS swap that will run ethanol or other alcohol fuels.
Full product details
| Brand | EVIL ENERGY |
|---|---|
| Body Material | Aluminum |
| Compatible with Vehicle Type | Car |
| Inlet Connection Size | 0.43 inches |
| Manufacturer | EVIL ENERGY |
| Part Number | EV04233BK |
| Material | Aluminum |
| Operation Mode | Automatic |
| Outlet Connection Size | 0.5 inches |
| Product Style | Electric |
| Style | Electric |
Listed on Amazon as: EVIL ENERGY EFI 255LPH Electric Intank Fuel Pump High Flow 43 PSI Kit
View on Amazon
#8
8. DeatschWerks 9-201-0791
- Compatible with Vehicle Type: Car
- Body Material: Plastic
- Operation Mode: Automatic
Best for: Ethanol-compatible 255 LPH swaps.
Why it ranks #8: This 255 LPH in-tank pump is ethanol compatible, but its described application-specific fitment is for Subaru models rather than an LS swap.
Ethanol compatibility paired with 255 LPH output makes the DeatschWerks 9-201-0791 an option for builders seeking a moderate-flow in-tank pump. Its installation kit supports the pump-focused workflow, though the supplied application description names specific Subaru models rather than an LS-swap vehicle fitment.
The 255 LPH rating gives a builder a concrete flow figure to compare with an EFI system’s needs, while the listed ethanol compatibility supports fuel choices beyond gasoline. DeatschWerks describes a quiet, reliable turbine impeller, a relevant detail for an in-tank installation where pump operation occurs inside the tank. The installation kit is included, but the accompanying application description identifies Forester, Impreza and Legacy GT models. No LS-specific fitment is supplied, so the pump’s flow and fuel properties should not be mistaken for a confirmed swap-specific assembly.
- 255 LPH flow rating
- Listed as ethanol compatible
- Quiet turbine impeller
- Installation kit included
- The supplied application description identifies Subaru models, not an LS-swap vehicle fitment.
Skip it if you need a listed 415 LPH pump for a higher-flow setup; the DeatschWerks 9-403-1047 has that rating.
For a builder seeking an ethanol-compatible 255 LPH in-tank pump with an installation kit, this listing provides useful core specifications. Treat vehicle fitment as a separate decision: its supplied application description names Subaru models, not an LS-swap platform.
Full product details
| Brand | Deatsch Werks |
|---|---|
| Body Material | Plastic |
| Compatible with Vehicle Type | Car |
| Included Components | DeatschWerks (9-201-0791) 255 LPH In-Tank Fuel Pump with Installation Kit |
| Item Dimensions | 6.7 x 2.3 x 4.3 inches |
| Item Weight | 14.4 ounces |
| Dimensions | 6.7 x 2.3 x 4.3 inches |
| Manufacturer | DeatschWerks |
| Part Number | 9-201-0791 |
| Manufacturer Warranty Description | Warranty |
| Material | Plastic |
| Model Number | 9-201-0791 |
| Operation Mode | Automatic |
| Product Style | Gerotor |
Listed on Amazon as: DeatschWerks (9-201-0791) 255 LPH In-Tank Fuel Pump with Installation Kit
View on AmazonAvoiding fitment traps in LS swap fuel systems
A pump’s flow rating does not confirm that its assembly fits your tank or delivers the pressure your LS setup needs. The Lanotech listing targets 1982–1995 GM TBI vehicles and describes a drop-in installation, while the Aeromotive 18073 is a complete hanger assembly for 1982–1992 Camaros that retains the stock outlet location. The AuHydraXel assembly names 1973–1991 Chevy and GMC trucks, but its supplied information should be checked carefully: the title says 255 LPH while the key features describe a 450 LPH pump.
These differences make exact part and vehicle verification important. Before buying, compare tank shape, hanger and outlet arrangement, EFI system pressure requirements, and whether the product is a pump alone or a complete assembly.
A vehicle range in a listing is not proof that every tank or swap configuration within that range matches.
What a pump-only listing leaves you to check
A pump-only product may require more installation planning than a vehicle-specific assembly. The Lanotech listing includes a pump, strainer, tank seals, and stainless-steel clamps, but explicitly excludes the fuel filter. The Aeromotive 18073 is supplied as a pump-and-hanger assembly for a defined Camaro fitment, while the AuHydraXel listing identifies a fuel pump assembly for Square Body trucks.
By contrast, several universal-style pumps include installation parts such as hose, clamps, sleeves, or a pre-filter, but do not establish a direct fit for a particular LS swap tank. Check whether your existing hanger can accept the pump, whether seals and connectors match, and whether additional filtration or wiring components are needed.
The supplied descriptions do not settle those installation details for every vehicle, so verify them against your tank and build before ordering.
How to Choose an LS Swap In-Tank Pump
Vehicle and hanger fitment
Look first for a listed fitment that matches your vehicle and tank, not just a pump labeled for EFI. The Lanotech pump describes a direct drop-in fit for 1982–1995 GM TBI vehicles; the Aeromotive 18073 is a replacement assembly for 1982–1992 Camaros; and the AuHydraXel assembly names 1973–1991 Chevy and GMC trucks. The AEM and EVIL ENERGY listings do not provide comparable LS vehicle-specific fitment.
Choose a complete, named application when retaining a factory tank or hanger matters. Consider a more general pump only when you have confirmed its dimensions, connections, and installation arrangement against your existing setup.
Flow and pressure requirements
Match the pump’s stated flow and pressure to your EFI system and fuel demand. Listed figures range from 255 LPH for the EVIL ENERGY and DeatschWerks 9-201-0791 pumps to 340 LPH for the Aeromotive assembly and AEM 50-1200; the DeatschWerks 9-403-1047 lists 415 LPH. The AuHydraXel feature text says 450 LPH, although its title says 255 LPH, so verify the exact specification.
The Lanotech specifies 58 PSI, while EVIL ENERGY gives flow at 43 PSI and the AEM 50-1200 lists 340 LPH at 40 PSI. Buyers needing confirmed vehicle pressure should prioritize an explicit pressure figure; do not treat higher LPH alone as proof of suitability.
Fuel compatibility and included parts
Check both fuel compatibility and what arrives in the box before settling on a pump. The AEM 50-1200 is tested for ethanol up to E100 and methanol up to M100, and both DeatschWerks pumps are described as ethanol compatible. The EVIL ENERGY pump is specified for gasoline only.
Included parts vary: the AEM 50-1000 lists a sleeve, end caps, pre-filter, hose, clamps, and flying lead; the Lanotech includes a strainer and seals but not a fuel filter. Choose an ethanol-compatible option for an ethanol-fueled build, and favor a listing with the needed installation pieces if you are replacing more than the pump itself.
Verify any omitted filter, wiring, or hanger requirements separately.
Which In-Tank Pump Fits Your LS Swap?
For a 1982–1995 GM TBI conversion where a stated 58 PSI and drop-in fit matter, choose the Lanotech 58PSI Pump. For a 1973–1991 Chevy or GMC Square Body truck, the AuHydraXel LS Swap Assembly names the relevant truck range, but confirm its conflicting 255/450 LPH descriptions and exact fitment. Camaro owners retaining a 1982–1992 stock tank should consider the Aeromotive 18073 Assembly, a 340 LPH pump-and-hanger replacement.
If ethanol compatibility is the priority, the AEM 50-1200 E85 Pump lists testing up to E100. The DeatschWerks 9-403-1047 offers the highest listed flow at 415 LPH, but no LS-specific vehicle fitment is supplied.
Verify pressure, tank, hanger, and fuel type before ordering.
Related Buying Guides
- Best Ls Swap Fuel Pump
- Best External Fuel Pump For Ls Swap
- Best Fuel System For Ls Swap
- Best Transfer Fuel Tank With Pump
- Best Auxiliary Fuel Tank With Pump
- Best Radiator For Ls Swap
Frequently Asked Questions
How do I confirm that an in-tank pump fits my fuel tank and hanger?
Match the pump or assembly to your vehicle’s year, model, tank, and hanger, then verify those details against the product information before ordering. A vehicle-range title alone may not confirm exact fitment. For the Square Body assembly, check the tank and hanger and resolve its conflicting 255/450 LPH descriptions.
What fuel pressure does my LS EFI system and regulator require?
Use the pressure specified for your particular LS EFI system and regulator, and confirm the pump can support that requirement. The listings include different pressure information: the GM TBI pump states 58 PSI, while the EVIL ENERGY kit title states 43 PSI. Do not assume those values are interchangeable.
Do I need to upgrade wiring, relays, or fuel lines for an in-tank pump?
Check the pump instructions and your vehicle’s existing electrical and fuel systems before installation. Confirm the wiring, relay, connectors, and fuel lines are appropriate for the selected pump and application; the supplied product titles do not establish whether upgrades are required. Have a qualified installer assess any uncertain connections or components.
Which pump should I consider if I plan to use ethanol fuel?
Consider the AEM 50-1200 if ethanol compatibility is a priority; its product information lists testing up to E100. Verify that the rest of your fuel system is also suitable for your intended fuel, since the pump listing alone does not confirm compatibility of the tank, lines, seals, or other components.
Should I choose a pump based on its listed flow rate alone?
No. Match flow and pressure to your engine, regulator, fuel, and installation, and confirm vehicle fitment separately. The DeatschWerks 9-403-1047 has the highest listed flow here at 415 LPH, but no LS-specific vehicle fitment is supplied.
A higher listed flow does not by itself establish that it suits your setup.
Final Words
For a 1982–1995 GM TBI conversion, the Lanotech 58PSI Pump is the clearest match when its drop-in fit and stated pressure suit your setup; note that its fuel filter is not included. For a 1973–1991 Square Body, consider the AuHydraXel assembly only after confirming fitment and its conflicting flow descriptions. Camaro owners retaining a stock tank can consider the Aeromotive assembly.
Verify tank, hanger, pressure, and fuel compatibility before ordering.


