Best Hydraulic Trim For Outboard: Compare 10 Replacement Units

#1 · Best Overall

1. T-H Marine CMC PT-35

• Weight: 24 lb

Best for: 35HP motors needing broad tilt travel.

Why it ranks #1: Rated for motors up to 35 HP, with 5.5-inch setback, 84 degrees of trim and tilt, and clamp-on or bolt-on mounting without an adapter.

An 84-degree trim-and-tilt range is the distinctive specification of this T-H Marine CMC PT-35, giving operators broad motor movement for handling a 35HP-or-smaller outboard. Its 5.5-inch setback is stated to enhance stability and performance, and it accommodates clamp-on or bolt-on motors without an adapter.

The PT-35’s 84 degrees of trim and tilt provides the stated range of motor movement, while its 5.5-inch setback is linked to improved boat stability and performance. Rated for 35HP and smaller motors, it sets a clear engine ceiling for buyers. Clamp-on and bolt-on compatibility without an adapter can simplify the mounting plan, and aluminum construction with stainless-steel fasteners specifies the assembly materials for marine installation.

Skip it if you need a small-outboard kit with a wiring harness included; Camoo’s PT-35 listing specifies a wiring cable harness kit.

Owners of 35HP-or-smaller clamp-on or bolt-on outboards who value the stated 84-degree movement can consider this PT-35. Its setback and no-adapter mounting are relevant, but the horsepower rating remains the key boundary.

Listed on Amazon as: T-H Marine – 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

#2 · Wiring Kit Included

2. Camoo PT-35 Kit

• Weight: 12.04 kg
• Material: 6061 T6 Aluminum
• Material Type: 6061 T6 Aluminum

Best for: Compact PT-35 installation projects.

Why it ranks #2: Covers motors up to 35 HP and smaller, includes a wiring cable harness kit, and specifies 5.5-inch setback and 6061 T6 aluminum.

The 51⁄2-inch setback and support for outboards from 2HP through 35HP define this Camoo PT-35 kit for small-engine installations. Its listed mounting options include bolt-on and clamp-on motors within an 11-inch frame, with no adapter needed, and its 6061 T6 aluminum construction keeps the unit’s material explicit.

Camoo specifies compatibility with motors up to 35HP and down to 2HP, giving small-outboard owners a broad stated range within the PT-35 category. The 51⁄2-inch setback is described as improving stability and performance while helping the prop get a better bite at a higher setting. Support for bolt-on and clamp-on motors within an 11-inch frame, without an adapter, can simplify installation planning. The 6061 T6 aluminum unit measures 11.5 by 3.72 by 10 inches.

Skip it if you need tilt and trim for an outboard above 35HP; Winibo’s QX90 is listed for outboards up to 90HP.

Owners installing a PT-35 on a small bolt-on or clamp-on motor within an 11-inch frame can benefit from the stated no-adapter mounting and setback. The 2–35HP range is the key limit to check.

Listed on Amazon as: PT-35 Tilt and Trim & Wiring Cable Harness Kit up to 35 HP Outboard Motor

#3 · Best Small-Motor Fit

3. Bzcovac PT-35

• Weight: 19.5 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: Small-outboard PT-35 users.

Why it ranks #3: A PT-35 unit for up to 35 HP with a 5.5-inch setback; the listing includes a wiring kit and states a one-year manufacturer warranty.

A 51⁄2-inch setback is the defining feature of this Bzcovac PT-35 unit, positioning the prop farther back to support stability and a better bite at a higher prop setting. Its stated application is up to 35HP, and a wiring kit is included with the aluminum assembly.

The 51⁄2-inch setback connects the unit’s placement to the stated stability and prop-bite benefits at a higher prop setting. Switch-activated lifting lets an operator raise the motor to help protect the prop from shallow water or debris, while also avoiding manual tilting strain. The PT-35 is rated for up to 35HP, and the included wiring kit supports the electrical installation workflow; its 19.5-pound weight is relevant when handling the assembly.

Skip it if you need a unit expressly listed for engines above 35HP; Winibo’s QX90 is specified for outboards up to 90HP.

Small-outboard owners seeking powered tilt, prop protection, and a 51⁄2-inch setback can consider this PT-35 for motors within its 35HP limit. The included wiring kit helps with the electrical setup, but the horsepower ceiling is decisive.

Listed on Amazon as: 3002.1017 52100 for CMC PT-35 Tilt and Trim up to 35 HP – Outboard Motor Electric Hydraulic Power Trim & Tilt Unit

#4 · Best 60 HP Range

4. Winibo 8M0055011 Assembly

• Weight: 11.2 lb
• Material: Alloy Steel, Aluminum
• Material Type: Alloy Steel, Aluminum

Best for: Mercury four-stroke trim replacement.

Why it ranks #4: Lists Mercury F35, F40, F50, and F60 four-stroke fitment, alloy steel and aluminum construction, and a one-year warranty.

Compatibility with Mercury F35, F40, F50, and F60 four-strokes is the central feature of Winibo’s 8M0055011 assembly, giving replacement shoppers named engine applications to check. Its listed alloy-steel and aluminum construction accompanies claims of precise tilt adjustment and reduced turbulence and vibration during navigation.

The listed Mercury F35–F60 four-stroke range and replacement references 8M0055011, 893517T01, 855654T09, 855654T08, and 855654T4 give buyers several ways to compare their application. Winibo says the assembly enables precise engine tilt adjustment and minimizes turbulence and vibration, tying trim control to the stated stability and balance benefits. At 11.2 pounds, it is lighter to handle than a heavier assembly, while its alloy-steel and aluminum materials suit the stated marine component use.

Skip it if you need a trim unit for a 75–115HP Mercury or Mariner; RisWhiteMeteors’ 8M0090335 assembly lists select applications in that range.

Mercury four-stroke owners whose engines fall within the listed F35–F60 range can consider this replacement for powered tilt adjustment. Use the engine designation and replacement references to assess fit; its stated compatibility does not extend above 60HP.

Listed on Amazon as: 8M0055011 Outboard Power Tilt & Trim Assembly up to 60HP

#5

5. Minke Marine Mercury Trim

Best for: Mercury 30–60HP replacement projects.

Why it ranks #5: Specifies Mercury four-stroke 30 HP and 35–60 HP plus two-stroke 55–60 HP applications, with several replacement references.

A broad set of listed Mercury applications—30HP and 35–60HP four-strokes, plus 55–60HP two-strokes—defines this Minke marine electric hydraulic replacement. It names five replacement references, including 8M0055011, giving owners multiple identifiers to compare when planning a trim-and-tilt repair.

The application details cover Mercury 30HP, 35–60HP four-strokes, and 55–60HP two-strokes, while verified examples name 35HP Jet, 40HP EFI Sea Pro, 50HP EFI, 60HP EFI, and 60HP Sea Pro. That combination helps buyers compare engine type and model rather than using a broad horsepower range alone. The unit is an electrically actuated hydraulic replacement, and its five listed references—855654T4, 893517T01, 855654T08, 855654T09, and 8M0055011—support part-number matching.

Skip it if you need an assembly expressly listed for Mercury 40–60HP EFI Sea Pro and standard applications; RisWhiteMeteors’ 8M0055011 replacement lists that range.

Mercury owners handling a trim-and-tilt replacement within the listed 30–60HP applications can use the engine-type details and references to narrow the match. Check the separate two-stroke and four-stroke boundaries before selecting it.

Listed on Amazon as: Electric Hydraulic Tilt and Trim Unit for Mercury 30HP-60HP Outboard Motors, Replacement for 855654T4 893517T01 8M0055011 F6001A

#6

6. RisWhiteMeteors 40–60 HP Trim

• Material: Metal
• Material Type: Metal

Best for: Mercury 40–60HP replacement buyers.

Why it ranks #6: A listed electric hydraulic replacement for Mercury and Mariner 40–60 HP, with references including 830150T10 and 8M0055011.

A direct-replacement claim for Mercury and Mariner 40–60HP applications sets this RisWhiteMeteors electric hydraulic assembly apart for owners matching a specified replacement. It lists three replacement references and describes smooth lifting, strong power, and stable operation, with a metal construction and marine-use recommendation.

The listed 830150T10, 8M0055006, and 8M0055011 references give buyers specific identifiers for comparing the assembly with an existing unit. Its electric hydraulic operation is described as providing smooth lifting and stable operation, supporting powered engine adjustment on the water. The product is stated to fit Mercury and Mariner outboards from 40–60HP, and a verified Mercury 40HP EFI Sea Pro application adds one specific example. Metal construction and corrosion resistance are also stated for marine use.

Skip it if you have a Mercury application outside 40–60HP; Minke marine’s unit lists Mercury 30–60HP four-stroke and 55–60HP two-stroke applications.

Mercury or Mariner owners seeking a powered replacement within the stated 40–60HP range can use the reference numbers to guide matching. The listed boundary is important, and the verified example specifically names a Mercury 40HP EFI Sea Pro.

Listed on Amazon as: 8M0055011 830150T10 8M0055006 Electrically Hydraulic Power Trim &Tilt Compatible with Mariner Mercury Outboard 40-60HP

#7 · High-HP Mercury Fit

7. RisWhiteMeteors 75–115 HP Trim

Best for: Mercury-Mariner replacement buyers.

Why it ranks #7: Targets listed 2014 Mariner 75, 80, 100, and 115 HP applications and identifies replacement references including 818903A1 and 8M0090335.

Electric operation is the defining feature of this RisWhiteMeteors assembly, enabling powered trim and tilt for launching, trimming, and beaching rather than manual lifting. Its listed applications cover select 75–115HP Mercury and Mariner outboards, making the stated engine range the key starting point for replacement planning.

The assembly replaces several listed Mercury and Mariner references, including 818903A1, 830250A1, 8M0090335, and 898447T01, which helps buyers identify it when matching an existing component. Its electric operation supports powered engine positioning for the stated launching, trimming, and beaching uses. The verified application details name select 75, 80, 100, and 115HP Mariner engines, so buyers should treat the specific listed application—not horsepower alone—as the relevant fit boundary.

Skip it if you need a verified application beyond the listed Mariner models; the Winibo TT-ME-60HP lists Mercury F35–F60 compatibility.

A Mercury or Mariner owner seeking an electric replacement for the listed applications can use this assembly for routine trim, launch, and beaching adjustments. Check the specified model and reference match; the stated applications are selective.

Listed on Amazon as: Outboard Power Trim & Tilt Motor Assembly Replacement for Mercury Mariner 75-115HP | Replaces OEM 818903A1 830250A1 8M0090335 898447T01 | Hydraulic Boat Lift Engine Parts

#8

8. Minke Marine Yamaha 40–70 HP Trim

Best for: Yamaha 50–60HP replacement shoppers.

Why it ranks #8: Provides Yamaha four-stroke 50 and 60 HP fitment details, including model years and long- or short-axis versions for the F50 and T50.

Verified Yamaha F50/T50 and F60/T60/FT60 applications distinguish this Minke marine electric hydraulic replacement, with listed coverage for select four-stroke models and shaft configurations. Its three reference numbers help identify the intended replacement, while the product details also name a high-rudder version among the 60HP applications.

The verified applications include Yamaha F50/T50 50HP four-strokes with long or short axis, and F60/T60/FT60 60HP four-strokes, including a high-rudder version. That specificity helps owners compare the engine family and configuration rather than relying only on horsepower. Electric hydraulic operation supports powered trim and tilt as a replacement assembly. The listed reference numbers—6C5-43800, 69W-43800, and 6CJ-43800—provide additional identifiers for checking an existing component before planning the repair.

Skip it if you own a Yamaha 25–45HP application; Minke marine’s 65W-43800 unit lists that smaller two- and four-stroke range.

Yamaha owners with a listed F50/T50 or F60/T60/FT60 four-stroke configuration can use the model and reference details to guide replacement matching. Confirm the engine family and shaft or rudder configuration against the stated applications.

Listed on Amazon as: 6C5-43800 69W-43800 6CJ-43800 Electrically Hydraulic Power Trim &Tilt Replacement for Yamaha Outboard 4-Stroke 40HP-70HP F6001B

#9

9. Minke Marine Yamaha 20–40 HP Trim

Best for: Smaller Yamaha outboard replacements.

Why it ranks #9: Lists Yamaha 25–40 HP two-stroke and 20–45 HP four-stroke ranges, with several 65W-43800 replacement references.

Coverage for Yamaha 2-stroke 25–40HP and 4-stroke 20–45HP applications makes this Minke marine power trim assembly a focused replacement option for smaller outboards. It lists 65W-43800 and 67C-43800 references alongside several 65W-43800 suffix variants, giving buyers concrete identifiers for matching.

The separate two-stroke and four-stroke ranges help owners narrow the application: 25–40HP for two-strokes and 20–45HP for four-strokes. The listed 65W-43800 and 67C-43800 references, plus several 65W-43800 suffix variants, provide identifiers for comparing the replacement with an existing assembly. Because the product is presented as a power trim assembly replacement, it suits a maintenance or repair workflow where engine type, horsepower, and part reference all matter to the selection.

Skip it if you need a Yamaha replacement for a 50–60HP four-stroke; Minke marine’s 6C5-43800 unit lists those engine families.

Yamaha owners replacing a trim assembly on a 25–40HP two-stroke or 20–45HP four-stroke can use the distinct ranges and listed references to assess the match. Engine type matters because the stated limits differ.

Listed on Amazon as: 65W-43800 67C-43800 Power Trim Assy Replacement for Yamaha Outboard 2-Stroke 25-40HP & 4-Stroke 20-45HP F4001A

#10

10. Winibo QX90 Jack Plate

• Weight: 32 lb
• Material: Aluminum-Alloy, Stainless Steel
• Material Type: Aluminum-Alloy, Stainless Steel

Best for: Up-to-90HP tilt-and-trim buyers.

Why it ranks #10: Described as an electric power tilt trim jack plate for up to 90 HP, not a direct replacement assembly; its listed 330-pound capacity helps identify its distinct format.

A 330-pound load capacity is the clearest specification of Winibo’s electric power tilt and trim jack plate, giving buyers a concrete capacity figure when assessing the unit. It is listed for outboards up to 90HP and combines aluminum-alloy and stainless-steel materials in a 32-pound assembly.

The electric jack-plate style unit is listed for boats and outboards up to 90HP, defining its stated application rather than tying it to a particular engine model. Its 330-pound load capacity offers a useful limit to consider when evaluating the intended setup. Aluminum-alloy and stainless-steel construction identify the materials used, while the 18.5 x 16.9 x 10.2-inch dimensions and 32-pound weight matter when planning space and handling during installation.

Skip it if you need a replacement keyed to a specific Mercury reference; Minke marine’s 8M0055011 unit lists those replacement references.

Boat owners assessing an electric jack plate for an outboard up to 90HP can weigh its stated capacity and physical dimensions against their installation plan. Its 32-pound weight and listed upper horsepower limit are important boundaries.

Listed on Amazon as: Power Tilt and Trim Unit for Outboard Motor Up to 90HP (Gray)