A strong hydraulic jack plate for a 60 hp outboard should explicitly cover that horsepower, provide useful vertical adjustment, and match your boat’s mounting setup. The 10–150 hp electric models in this roundup include 6.7 inches of travel and manual release valves, while other options offer hydraulic kick-back designs or higher motor ratings. Those differences matter: more travel may help with height adjustments, but setback, engine weight, transom limits, and installation compatibility still need checking before you buy.
This comparison ranks all ten listed products by fit for a 60 hp motor and the specifications available in the supplied listings. Treat broad horsepower claims as a starting point, not confirmation that a particular plate fits your boat or mounting pattern.
For a 60 hp outboard, RisWhiteMeteors 6-Inch Electric Hydraulic Jack Plate leads because its listed 10–150 hp range includes 60 hp, and its 6.7 inches of vertical travel allows height adjustment. It also lists a manual release valve and compatibility with several major outboard brands. Confirm your engine’s weight, bolt pattern, transom capacity, and the plate’s installation requirements before ordering; the listed horsepower range alone does not establish fit for every boat and engine combination.
Our Top Picks
Best OverallRisWhiteMeteors Electric Jack Plate
Its stated 10–150 hp range includes a 60 hp motor, with 6.7 inches of travel, electric adjustment, and a manual release valve.
View on Amazon
Best Travel RangeMinke Marine Electric Jack Plate
The 10–150 hp application explicitly covers 60 hp, and the listed 6.7-inch travel and manual release valve suit adjustable mounting needs.
View on Amazon
Manual ReleaseIts listed 10–150 hp range covers 60 hp, and it combines 6.7 inches of vertical travel with a manual release valve.
View on Amazon- Kick-Back Design Bob's Machine 100-105100 Kick-Back Jac
- Highest HP Rating Bob's Machine 100-106010 Jac Plate
Compare Jack Plates by Fit, Setback, and Lift
| # | Product | Dimensions | Weight | Material | Buy |
|---|---|---|---|---|---|
| 1 | 1. RisWhiteMeteors Electric Jack PlateBest Overall | — | — | — | View on Amazon |
| 2 | 2. Minke Marine Electric Jack PlateBest Travel Range | — | — | — | View on Amazon |
| 3 | 3. PURANOD Electric Jack PlateManual Release | 18.11"D x 11.42"W x 16.93"H | 51.8 lb | — | View on Amazon |
| 4 | 4. Bob's Machine 100-105100 Kick-Back JacKick-Back Design | — | 65 lb | — | View on Amazon |
| 5 | 5. Weonefit 100-105100 Kick-Back PlateShallow-water kick-back setup | 21.65 x 18.9 x 12.2 in | 28.6 kg | Aluminum alloy | View on Amazon |
| 6 | 6. Bob's Machine 100-106010 Jac PlateHighest HP Rating | 6.02 x 16.73 x 13.78 in | 23 kg | Metal | View on Amazon |
| 7 | 7. Winibo JPH1500 Electric Jack PlateCorrosion-protected electric lift | 16.54 x 11.02 x 17.72 in | 44.5 lb | Aluminum-Alloy, Stainless Steel | View on Amazon |
| 8 | 8. T-H Marine Atlas 4-Inch PlateSelf-contained hydraulic system | 18 x 10 x 6 in | 51 lb | Aluminum | View on Amazon |
| 9 | 9. CMC PL-65 Hydraulic Jack PlateV-6-rated compact travel | — | 53 lb | — | View on Amazon |
| 10 | 10. Winibo JPH3500K Kick-Back Plate12-volt kick-back electric lift | 7.68"D x 14.17"W x 12.8"H | 66 lb | Aluminum, Stainless Steel | View on Amazon |
Detailed Reviews: Best Hydraulic Jack Plate For 60 Hp Outboard
Why it ranks #1: Its stated 10–150 hp range includes a 60 hp motor, with 6.7 inches of travel, electric adjustment, and a manual release valve.
A 10–150 hp rating puts this RisWhiteMeteors plate within range for a 60 hp outboard, while 6.7 inches of vertical travel lets you change motor height for varying boating conditions. Electric hydraulic lifting makes those adjustments without manually repositioning the engine, and a manual release valve provides another way to lower it.
The stated 10–150 hp range covers a 60 hp motor, and compatibility with many Mercury, Yamaha, Suzuki, and Honda outboards makes the listed application broad. Its 6.7-inch vertical travel gives room to adjust mounting height as conditions change; the electric hydraulic system handles the lift rather than requiring manual repositioning. The manual release valve adds a separate lowering option. The product information does not specify setback or installation hardware, so those details matter when planning the transom setup.
- Rated for 10–150 hp outboards, including a 60 hp application
- 6.7 inches of vertical adjustment
- Electric hydraulic lifting avoids manual repositioning
- Manual release valve offers an alternative lowering method
- No setback measurement is specified, making transom-spacing comparison difficult.
Skip it if you need a stated setback measurement before choosing; Bob's Machine 6 in Jac Plate specifies a 6-inch setback.
A 60 hp owner seeking electric height adjustment across changing conditions can consider this 6.7-inch-travel plate. Its listed horsepower range is broad, but buyers who need a specified setback dimension should compare that requirement before selecting it.
Full product details
| Brand | RisWhiteMeteors |
|---|---|
| Color | Black |
| Included Components | 1 Pack |
| Manufacturer | RisWhiteMeteors |
| Part Number | ZZ001 |
| Manufacturer Warranty Description | 12-Month |
| Model Number | 6 Inch Electric Hydraulic Jack Plate |
Listed on Amazon as: 6" Electric Hydraulic Jack Plate for 10-150 HP Outboard Motors, 6.7 Inch Vertical Travel, Manual Release Valve, Universal Fit ZZ001
View on AmazonWhy it ranks #2: The 10–150 hp application explicitly covers 60 hp, and the listed 6.7-inch travel and manual release valve suit adjustable mounting needs.
A 10–150 hp application range makes this Minke marine plate a listed match for 60 hp outboards, and its replacement positioning suits owners updating an existing setup. The 6.7-inch vertical travel supports engine-height changes, while electric hydraulic operation provides lifting without manual motor repositioning.
The stated 10–150 hp range includes 60 hp engines, and the listing describes compatibility with most mainstream outboards, making it relevant both for upgrades and replacement use. A 6.7-inch travel range allows height adjustments to respond to boating conditions. The electric hydraulic system handles lifting, while the manual release valve provides another lowering option. No setback dimension or included mounting hardware is specified, so those details should shape installation planning.
- Rated for 10–150 hp outboards
- Presented for upgrades and replacement applications
- 6.7 inches of vertical travel
- Electric hydraulic lift with manual release valve
- No setback dimension is provided for planning motor position.
Skip it if you need a stated 6-inch setback; Bob's Machine 6 in Jac Plate lists that dimension.
A 60 hp owner replacing an existing plate or seeking electric height adjustment can consider this Minke marine option. Its 6.7-inch travel is specified, but the listing leaves setback and mounting-hardware details open for the installation plan.
Full product details
| Brand | Minke marine |
|---|---|
| Color | Black |
| Included Components | 1 |
| Manufacturer | Minke marine |
| Part Number | 6 Inch Electric Hydraulic Jack Plate |
| Manufacturer Warranty Description | 12-Month |
Listed on Amazon as: 6 Inch Electric Hydraulic Jack Plate Replacement for 10‐150HP Outboard Motors, 6.7" Vertical Travel with Manual Release Valve, Universal Boat Outboard Engine Fit VL001
View on Amazon
#3 · Manual Release
3. PURANOD Electric Jack Plate
- Dimensions: 18.11"D x 11.42"W x 16.93"H
- Weight: 51.8 lb
Best for: Manual-release electric adjustment.
Why it ranks #3: Its listed 10–150 hp range covers 60 hp, and it combines 6.7 inches of vertical travel with a manual release valve.
A built-in manual release valve distinguishes this PURANOD electric hydraulic plate, offering an alternative way to lower the outboard. Its 10–150 hp application includes a 60 hp motor, and 6.7 inches of vertical travel provides room to adjust mounting height for different conditions.
The stated 10–150 hp range covers a 60 hp outboard, and the listing names Yamaha, Suzuki, Mercury, and Mercruiser among compatible engine brands. Electric hydraulic lifting changes motor height without manual repositioning, while the 6.7-inch travel provides the adjustment range. The manual release valve gives an alternative lowering option. At 51.8 pounds, the unit's listed weight is relevant to transom planning and handling during installation.
- Rated for 10–150 hp outboards
- 6.7 inches of vertical travel
- Electric hydraulic lift avoids manual repositioning
- Manual release valve provides an alternative lowering option
- The listed unit weighs 51.8 pounds.
Skip it if you want a lighter listed unit; the Winibo 8-inch electric hydraulic plate with 6.69-inch lift is listed at 44.5 pounds.
A 60 hp owner seeking electric adjustment, a manual release valve, and 6.7 inches of travel can consider this PURANOD plate. Its 51.8-pound weight matters for transom planning, even though its horsepower range includes the target motor.
Full product details
| Brand | PURANOD |
|---|---|
| Color | Black |
| Included Components | 1 Pack |
| Dimensions | 18.11"D x 11.42"W x 16.93"H |
| Item Weight | 51.8 pounds |
| Manufacturer | PURANOD |
| Part Number | ZZ001 |
| Manufacturer Warranty Description | 12-Month |
| Model Number | ZZ001 |
Listed on Amazon as: Electric Hydraulic Jack Plate for 10-150HP Outboard Motors, 6.7" Vertical Travel, Manual Release Valve, Marine Lift System
View on Amazon
#4 · Kick-Back Design
4. Bob's Machine 100-105100 Kick-Back Jac
- Weight: 65 lb
Best for: Bob's shallow-water kick-back.
Why it ranks #4: The listing identifies a 150 hp model and 6-inch setback, with 7.5 inches of total lift from hydraulic stroke and built-in lift.
Bob's Machine combines a 6-inch hydraulic stroke with 1.5 inches of built-in lift for 7.5 inches of total lift, targeting shallow-water control on fishing rigs. The 150 hp model rating includes a 60 hp outboard, and the listing names duck boats, jon boats, and fishing boats as applications.
The 6-inch setback establishes the motor's aft position, while the hydraulic stroke and built-in structural lift provide 7.5 inches of total height adjustment. That combination supports the shallow-water access and motor-height control described for this kick-back plate. Its listed applications include duck boats, jon boats, and fishing rigs, making those use cases particularly relevant to a 60 hp buyer. At 65 pounds, the plate's weight is also a practical consideration for the boat's transom setup.
- 6-inch setback
- 7.5 inches of total lift
- Kick-back plate is listed for shallow-water access
- 150 hp rating includes a 60 hp outboard
- At 65 pounds, the plate adds substantial weight to the transom assembly.
Skip it if you need a lighter listed unit; Weonefit's 6-inch Kick-Back Hydraulic Jack Plate is listed at 28.6 kg.
This Bob's Machine plate fits a 60 hp owner seeking kick-back adjustment for shallow-water fishing or boat use. Its 6-inch setback and 65-pound weight are important boundaries to weigh against the boat's transom arrangement.
Full product details
| Brand | Bob's Machine |
|---|---|
| Item Weight | 65 pounds |
| Item model number | 100-105100 |
| Manufacturer | Bob's Machine |
| Part Number | 100-105100 |
| Model | 100-105100 |
| Dimensions | 23 x 19 x 12 inches |
| Additional Information | Important information |
Listed on Amazon as: Bob's Machine 6 in Hydraulic Kick-Back Jac 100-105100, 6 in Setback, 150 HP
View on Amazon
#5
5. Weonefit 100-105100 Kick-Back Plate
- Dimensions: 21.65 x 18.9 x 12.2 in
- Weight: 28.6 kg
- Material: Aluminum alloy
Best for: Shallow-water kick-back setup.
Why it ranks #5: Its 150 hp listing and 6-inch setback cover a motor below that rating; 7.5 inches of total lift is specified for height adjustment.
A 6-inch setback kick-back layout pairs with 7.5 inches of total lift on this Weonefit plate, giving fishing and shallow-water rigs substantial motor-height adjustment. Its stated application includes duck boats, jon boats, and bass boats, and the 150 hp rating places a 60 hp outboard within the listed range.
The 6-inch setback moves the motor aft, while a 6-inch hydraulic stroke and 1.5 inches of built-in lift combine for 7.5 inches of total vertical adjustment. That range gives a 60 hp operator options for changing motor height, including the shallow-water use named in the listing. The product is identified for duck boats, jon boats, bass boats, and fishing rigs. Its 28.6 kg listed weight is relevant when considering the overall transom assembly.
- 6-inch setback kick-back configuration
- 7.5 inches of total lift
- Listed for duck boats, jon boats, bass boats, and fishing rigs
- 150 hp application rating includes 60 hp motors
- The listed unit weight is 28.6 kg, a substantial addition to the transom assembly.
Skip it if you want an integrated pump that avoids a separate pump mount; Bob's Machine 6 in Jac Plate lists that feature.
A 60 hp fishing-rig owner seeking kick-back positioning and 7.5 inches of lift can consider this plate. Its 6-inch setback and 28.6 kg weight are relevant boundaries when evaluating the transom layout and assembly.
Full product details
| Brand | Weonefit |
|---|---|
| Color | As Pics Shown |
| Included Components | 1x Boat Jack Plate |
| Item Dimensions | 21.65 x 18.9 x 12.2 inches |
| Item Weight | 28.6 kg |
| Dimensions | 21.65 x 18.9 x 12.2 inches |
| Manufacturer | Weonefit |
| Part Number | Weonefit 100-105100 100105100 |
| Manufacturer Warranty Description | 2 years |
| Material | Aluminum alloy |
| Model Number | Weonefit 100-105100 100105100 |
Listed on Amazon as: 6" Kick-Back Hydraulic Jack Plate 100-105100 150 HP 7.5" Lift
View on Amazon
#6 · Highest HP Rating
6. Bob's Machine 100-106010 Jac Plate
- Dimensions: 6.02 x 16.73 x 13.78 in
- Weight: 23 kg
- Material: Metal
Best for: Integrated-pump setback setup.
Why it ranks #6: Rated up to 300 hp and 625 lb, this 6-inch-setback plate exceeds a 60 hp motor’s stated rating and provides 7.5 inches total lift.
An internal hydraulic pump keeps this Bob's Machine plate from needing a separate pump mount, a useful rigging advantage when space is at a premium. Its 6-inch setback includes 1.5 inches of built-in lift plus 6 inches of adjustable travel, giving a 60 hp owner 7.5 inches of total lift to work with.
The integrated pump avoids planning for a separate pump mount, helping keep the rigging arrangement more compact. A 6-inch setback positions the motor aft, while 1.5 inches of built-in lift and 6 inches of adjustable travel combine for 7.5 inches total lift. The plate is rated up to 300 hp and 625 pounds, well above a 60 hp motor's horsepower rating, though the listed facts do not establish a particular boat's transom compatibility or installation requirements.
- Integrated hydraulic pump eliminates a separate pump mount
- 6-inch setback
- 7.5 inches of total lift from built-in lift and adjustable travel
- Rated for outboards up to 300 hp and 625 pounds
- Its 6-inch setback is a fixed configuration, so it does not suit every transom layout.
Skip it if you need a 4-inch setback rather than 6 inches; the T-H Marine Atlas Jack Plate is listed with 4-inch setback.
This suits a 60 hp owner prioritizing integrated hydraulic rigging and 7.5 inches of total lift. Its 6-inch setback is a key fit consideration, so compare the plate's aft position with your boat's transom arrangement before choosing.
Full product details
| Brand | Bob's Machine |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Boat |
| Included Components | Bob's Machine 100-106010 Action Series Jac Plate – 6", 300 HP Max |
| Item Dimensions | 6.02 x 16.73 x 13.78 inches |
| Item Weight | 23 kg |
| Load Capacity | 23 kg |
| Manufacturer | Bob's Machine |
| Part Number | 100-106010 |
| Material | Metal |
| Model Number | 100-106010 |
| Style Name | Adjustable |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Bob's Machine 6 in Jac Plate 100-106010, 6 in Setback – Rated up to 300 HP
View on Amazon
#7
7. Winibo JPH1500 Electric Jack Plate
- Dimensions: 16.54 x 11.02 x 17.72 in
- Weight: 44.5 lb
- Material: Aluminum-Alloy, Stainless Steel
Best for: Corrosion-protected electric lift.
Why it ranks #7: The listing specifies outboards up to 150 hp and 6.69 inches of stepless lift, but its 8-inch setback may not suit every boat.
Electrophoresis coating and anodic protection give this Winibo electric plate specified corrosion-protection treatments for saltwater use. Its 6.69-inch stepless lift adjusts motor height at the push of a button, and the stated up-to-150-hp application includes a 60 hp outboard.
The one-touch control and stepless 6.69-inch vertical lift let an operator adjust engine height without choosing among fixed positions. The product's electrophoresis coating and anodic protection are identified for corrosion resistance in harsh saltwater environments, a relevant detail for marine use. Its stated application reaches 150 hp, covering a 60 hp motor. The 44.5-pound listed weight is useful to consider when assessing the overall transom setup.
- 6.69-inch stepless vertical lift
- One-touch raise and lower control
- Electrophoresis coating and anodic protection
- Listed for outboards up to 150 hp
- The listed unit weighs 44.5 pounds.
Skip it if you want an explicitly stated manual release valve; the PURANOD electric hydraulic plate lists one.
A 60 hp owner wanting one-touch, stepless height changes and listed saltwater corrosion treatments can consider this Winibo. Its 44.5-pound weight is a practical transom consideration, and its lift is specified at 6.69 inches.
Full product details
| Brand | Winibo |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Boat |
| Included Components | Electric Hydraulic Jack Plate |
| Item Dimensions | 16.54 x 11.02 x 17.72 inches |
| Item Weight | 44.5 pounds |
| Load Capacity | 7055 Pound |
| Manufacturer | Winibo |
| Part Number | JPH1500 |
| Manufacturer Warranty Description | 1 year warranty |
| Material | Aluminum-Alloy, Stainless Steel |
| Model Number | JPH1500 |
| Style Name | Electric Hydraulic Jack Plate |
Listed on Amazon as: 8" Electric Hydraulic Jack Plate for Outboard Motor up to 150HP
View on Amazon
#8
8. T-H Marine Atlas 4-Inch Plate
- Dimensions: 18 x 10 x 6 in
- Weight: 51 lb
- Material: Aluminum
Best for: Self-contained hydraulic system.
Why it ranks #8: Its self-contained hydraulic pump avoids separate reservoir and lines, but the supplied data does not state a horsepower rating for confirming 60 hp fit.
A self-contained hydraulic pump system needs no reservoir or lines to install, simplifying the hydraulic-system portion of a jack plate setup. The T-H Marine Atlas has a 4-inch setback and a rod-and-slot lifting design; its self-lubricating polymer rods are stated to need no grease, reducing routine lubrication work.
The integrated pump system avoids installing a separate reservoir or hydraulic lines, which can simplify setup work. A 4-inch setback defines the plate's motor position relative to the transom, a useful dimension for comparing rigging layouts. Its rod-and-slot lift uses engineered polymer rods described as six times more abrasion resistant than steel and self-lubricating, so the listing calls for no grease. Mounting hardware is not included, a practical installation item to account for.
- Self-contained pump system requires no reservoir or lines to install
- 4-inch setback
- Rod-and-slot lifting design
- Self-lubricating polymer rods require no grease
- Mounting hardware is not included.
Skip it if you want mounting hardware in the package; Bob's Machine 6 in Jac Plate lists its plate as an included component.
This suits a buyer who values a self-contained hydraulic system, 4-inch setback, and a lift design that needs no grease. Mounting hardware is not included, so account for that requirement when planning the installation.
Full product details
| Brand | T-H Marine |
|---|---|
| Color | Brushed |
| Compatible with Vehicle Type | Car |
| Included Components | Hydraulic Jack Plate, Mounting hardware NOT included, Owner's manual |
| Item Dimensions | 18 x 10 x 6 inches |
| Item Weight | 51 pounds |
| Load Capacity | 1000 kg |
| Manufacturer | T & H MARINE SUPPLIES |
| Part Number | AHJ-4V-DP |
| Manufacturer Warranty Description | Manufacturer Limited |
| Material | Aluminum |
| Model Number | AHJ-4V-DP |
| Style Name | Classic |
Listed on Amazon as: TH Marine Atlas Jack Plate, 4" Setback, Standard, Brushed
View on AmazonWhy it ranks #9: The PL-65 is listed for V-6 motors and smaller with 5 inches of vertical travel, but the supplied description gives no specific 60 hp fit range.
A 5-inch vertical travel range distinguishes the CMC PL-65, with another 1.5 inches of adjustment available at each of the motor and transom brackets. It is rated for V-6 motors and smaller, placing a 60 hp outboard within the stated engine category.
The plate's 5 inches of vertical travel provide the main motor-height adjustment, while the 1.5-inch adjustment at both motor and transom brackets adds positioning options. Its V-6-and-smaller rating covers a 60 hp engine category, and the listing identifies it for fresh- and salt-water use. A self-contained, waterproof hydraulic actuator is specified, reducing dependence on separate hydraulic components. The stated design has no welds or castings to break.
- 5 inches of vertical travel
- 1.5 inches of adjustment at each bracket
- Rated for V-6 motors and smaller
- Self-contained waterproof hydraulic actuator
- Its 5-inch vertical travel is less than the 6.7-inch figures listed for several alternatives.
Skip it if you need 6.7 inches of stated travel; the RisWhiteMeteors 6-inch Electric Hydraulic Jack Plate lists that range.
This CMC PL-65 suits a 60 hp owner who values a V-6-and-smaller rating, waterproof actuator, and bracket adjustments. Its main vertical travel is 5 inches, so consider whether that range meets the boat's adjustment needs.
Full product details
| Brand | Boating Accessories |
|---|---|
| Color | White |
| Compatible with Vehicle Type | Boat |
| Included Components | T-H Marine 65302 CMC PL-65 High Speed Hydraulic Jack Plate |
| Item Weight | 53 pounds |
| Load Capacity | 8538 pound |
| Manufacturer | T-H Marine |
| Part Number | 65302 |
| Model Number | 65302 |
| Style Name | High-performance, Marine-grade |
Listed on Amazon as: T-H Marine – 3002.1023 65302 CMC PL-65 High Speed Hydraulic Jack Plate
View on Amazon
#10
10. Winibo JPH3500K Kick-Back Plate
- Dimensions: 7.68"D x 14.17"W x 12.8"H
- Weight: 66 lb
- Material: Aluminum, Stainless Steel
Best for: 12-volt kick-back electric lift.
Why it ranks #10: This is an 8-inch electric hydraulic plate with kick-back, but the supplied specifications do not state a horsepower rating for verifying 60 hp suitability.
An 8-inch electric hydraulic plate with kick-back combines powered lift and tilt use in one Winibo unit. Its listed 12-volt operation identifies the electrical supply, while aluminum and stainless steel construction specifies the materials; the product title identifies it for an outboard motor.
This plate is listed for electric hydraulic lift and tilt of a boat outboard motor, so its stated use goes beyond height adjustment alone. The 12-volt specification gives buyers a concrete electrical requirement to account for in the boat's setup. Its 8-inch format and kick-back designation identify the plate configuration, while aluminum and stainless steel are the listed materials. At 66 pounds, it is a substantial assembly to include in transom planning.
- Electric hydraulic operation
- Listed for outboard lift and tilt
- 12-volt specification
- Aluminum and stainless steel construction
- The listed unit weight is 66 pounds.
Skip it if you need a stated 6.7-inch travel figure and manual release valve; the PURANOD electric hydraulic plate specifies both.
A 60 hp owner seeking a 12-volt electric hydraulic lift-and-tilt plate can assess this Winibo configuration. The listing does not state a horsepower limit or travel distance, and its 66-pound weight merits attention during setup planning.
Full product details
| Brand | Winibo |
|---|---|
| Color | Black |
| Included Components | 8" Electric Hydraulic Jack Plate with Kick-Back |
| Dimensions | 7.68"D x 14.17"W x 12.8"H |
| Item Weight | 66 pounds |
| Manufacturer | Winibo |
| Part Number | JPH3500K |
| Manufacturer Warranty Description | 1 year warranty |
| Material | Aluminum, Stainless Steel |
| Model Number | JPH3500K |
| Operation Mode | Electric |
| Recommended Uses | Boat Outboard Motor Electric Hydraulic Lift & Tilt |
| Voltage | 12 volts |
Listed on Amazon as: 8" Electric Hydraulic Jack Plate with Kick-Back for Outboard Motor
View on AmazonCheck the full mounting system, not just horsepower
A 10–150 hp label does not by itself confirm that a jack plate fits your specific 60 hp outboard and boat. Before choosing, compare the engine’s mounting pattern, the plate’s mounting dimensions, the transom’s capacity, and the motor’s weight against the product documentation. This is especially important because several electric products list a broad horsepower range but do not provide mounting-pattern details in the supplied data.
Setback also varies: the Bob’s Machine 100-105100 Kick-Back Jac and Weonefit 100-105100 Kick-Back Plate specify 6 inches, while the Bob’s Machine 100-106010 Jac Plate lists a 6-inch setback. The T-H Marine Atlas 4-Inch Plate is identified as a 4-inch-setback model.
Don’t assume those measurements are interchangeable with your existing installation. Confirm all relevant dimensions and manufacturer fit guidance before purchase.
Plan for adjustment-related failure points
A jack plate that cannot be adjusted or installed as intended can leave the motor at an unsuitable height, so plan for the controls and installation as carefully as the lift range. The three 6-inch electric options from RisWhiteMeteors, Minke Marine, and PURANOD list manual release valves, which provide a specified alternative lowering method. The Winibo JPH1500 Electric Jack Plate lists one-touch electric control and 6.69 inches of lift, but the supplied specifications do not mention a manual release.
The Bob’s Machine 100-105100 Kick-Back Jac and Weonefit 100-105100 Kick-Back Plate instead emphasize kick-back design and 7.5 inches of total lift. These feature differences do not establish how a product performs in a particular failure or operating condition.
Read the installation and operating instructions, and verify the release procedure, wiring needs, hardware, and maintenance guidance for the exact model.
How to Choose a Jack Plate for a 60 hp Outboard
Horsepower fit and engine weight
Look for a stated horsepower range that includes 60 hp, then verify engine weight and the plate’s capacity separately. RisWhiteMeteors, Minke Marine, and PURANOD each list 10–150 hp applications. The Bob’s Machine 100-105100 Kick-Back Jac and Weonefit 100-105100 Kick-Back Plate are listed as 150 hp models, while the Bob’s Machine 100-106010 Jac Plate is rated up to 300 hp and 625 lb.
The Winibo JPH1500 Electric Jack Plate is listed for motors up to 150 hp and states a 7,055 lb load capacity. These figures are not a substitute for checking the boat, transom, and engine specifications together.
For a 60 hp buyer, the clearest starting point is a model whose stated range includes that horsepower; a higher rating may matter if it accommodates a heavier future motor.
Setback and total vertical adjustment
Choose a setback and lift range that suit your boat’s installation needs, rather than treating the biggest number as automatically best. The Bob’s Machine 100-105100 Kick-Back Jac and Weonefit 100-105100 Kick-Back Plate list 6 inches of setback and 7.5 inches of total lift. The Bob’s Machine 100-106010 Jac Plate also specifies a 6-inch setback and 7.5 inches total lift.
RisWhiteMeteors, Minke Marine, and PURANOD list 6.7 inches of vertical travel, while the Winibo JPH1500 Electric Jack Plate lists 6.69 inches and an 8-inch plate size. The CMC PL-65 gives 5 inches of vertical travel.
A buyer seeking a specific 6-inch setback can focus on the Bob’s models; one prioritizing listed travel should compare the 6.7-inch electric options against the boat’s approved mounting dimensions.
Operation and release features
Decide whether you want an electric lifting system, a specified manual release, or a kick-back design. RisWhiteMeteors, Minke Marine, and PURANOD describe electric hydraulic operation and list manual release valves, alongside 6.7 inches of travel. The Winibo JPH1500 Electric Jack Plate lists electric operation and 6.69 inches of stepless lift, but its supplied data does not state a manual release.
The Winibo JPH3500K Kick-Back Plate is listed as a 12-volt electric model with kick-back, though its provided specifications do not give a horsepower rating. Buyers who want a documented alternative lowering method can prioritize the first three; those wanting a kick-back configuration can compare the Bob’s Machine and Weonefit 150 hp models.
Check the full installation and control requirements for whichever model you choose.
Which Jack Plate Should a 60 hp Buyer Choose?
For a 60 hp motor, start with RisWhiteMeteors Electric Jack Plate: its listed 10–150 hp range includes the engine size, and it provides 6.7 inches of travel plus a manual release valve. Minke Marine Electric Jack Plate and PURANOD Electric Jack Plate list the same horsepower range and travel, so compare installation details and brand documentation among those options. If you specifically need a kick-back plate with a stated 150 hp model rating and 6-inch setback, consider Bob’s Machine 100-105100 Kick-Back Jac; Weonefit 100-105100 Kick-Back Plate also lists 7.5 inches of total lift.
For other setback or high-capacity needs, the Bob’s Machine 100-106010 Jac Plate lists up to 300 hp, but that higher rating alone does not establish a better match. Verify engine, transom, and bolt-pattern compatibility before deciding.
Related Buying Guides
- Best Outboard Hydraulic Jack Plate
- Best Jack Plate For 90 Hp Outboard
- Best Jack Plate For 25 Hp Outboard
- Best Hydraulic Jack Plate For Outboard Motor
- Best Hydraulic Jack Plate
- Best Hydraulic Steering For 150 Hp Outboard
Frequently Asked Questions
How do I confirm a jack plate’s bolt pattern matches my outboard and transom?
Match the hole layout, engine mounting dimensions, and transom pattern against the plate and engine documentation; do not assume “universal fit” guarantees every combination. Also check engine weight, transom capacity, and required hardware or installation procedures. If dimensions or limits are unclear, confirm them with the manufacturer or a qualified marine installer before ordering.
How much setback is appropriate for my boat and 60 hp motor?
There is no single setback that suits every boat and 60 hp motor. The appropriate amount depends on the hull, transom, engine, and intended setup. Check the boat and engine manufacturers’ guidance alongside the plate’s installation documentation, and confirm the transom can handle the selected arrangement before choosing a setback.
Can raising a 60 hp outboard affect cooling-water intake or handling?
Yes. Raising an outboard can affect water intake and handling, so make height changes cautiously and follow the engine manufacturer’s guidance. Check the cooling-water indicators specified for your motor and assess handling safely after adjustments.
If cooling or control seems abnormal, lower the engine and consult a qualified marine technician.
How should I compare setback and lift figures?
Treat setback and lift as different measurements: setback describes how far the plate moves the engine back, while lift or vertical travel describes height adjustment. Compare each figure with your boat’s needs and the product documentation; do not assume one measurement can compensate for a mismatch in the other.
What should I verify before ordering a plate?
Confirm your engine’s weight, bolt pattern, and mounting requirements, as well as your transom’s capacity. Review the plate’s installation requirements and brand compatibility information, too. A listed horsepower range that includes 60 hp is useful, but it does not by itself establish that the plate fits your specific boat and engine.
Final Words
For a 60 hp setup, start with the RisWhiteMeteors electric hydraulic plate: its listed horsepower range includes 60 hp, and it offers 6.7 inches of vertical travel and a manual release valve. Minke Marine and PURANOD list the same range and travel, so compare their installation details and brand documentation. Before choosing any plate, confirm engine weight, bolt pattern, transom capacity, and installation requirements; listed horsepower alone does not prove fit.



