A strong choice for a 150 hp outboard combines a stated 150 hp fit with enough vertical adjustment for your boat and a mounting layout that suits its transom. Bob’s Machine 6 in Kick-Back Jac is a compelling starting point: its listed 150 hp rating and 7.5 inches of total lift target this use directly. This roundup also includes electric-hydraulic plates rated from 10 to 150 hp, plus models with wider engine ranges that may suit future changes but require closer compatibility checks.
Setback varies from 4 to 8 inches, and lift specifications are not interchangeable: some describe adjustable travel, while others include built-in lift. Confirm your motor weight, transom requirements, and desired setback before choosing.
Bob’s Machine 6 in Kick-Back Jac leads because its listing explicitly specifies a 150 hp application and 7.5 inches of total lift: 6 inches of hydraulic stroke plus 1.5 inches of built-in lift. That makes its stated capacity and adjustment range a close match for this search. If you prefer electric-hydraulic operation and have a motor within the stated 10–150 hp range, RisWhiteMeteors 6 in Electric Hydraulic Plate is another direct-fit option, with 6.7 inches of vertical travel and a manual release valve.
Our Top Picks
Best OverallBob's Machine 6 in Kick-Back Jac
Its listing explicitly targets 150 hp and gives 7.5 inches of total lift from a 6-inch hydraulic stroke plus 1.5 inches of built-in lift.
View on Amazon
Best Lift RangeThe 150 hp listing specifies 7.5 inches total lift, combining a 6-inch hydraulic stroke with 1.5 inches of built-in lift.
View on Amazon
Best Electric FitRisWhiteMeteors 6 in Electric Plate
Its stated 10–150 hp compatibility directly covers the target motor, with 6.7 inches of travel and a manual release valve.
View on Amazon- Best 8-Inch Setback Winibo JPH1500 8 in Plate
- Highest Capacity Bob's Machine 100-106010
Compare Jack Plates by Fit, Lift, and Operation
| # | Product | Dimensions | Weight | Material | Buy |
|---|---|---|---|---|---|
| 1 | 1. Bob's Machine 6 in Kick-Back JacBest Overall | — | 65 lb | — | View on Amazon |
| 2 | 2. Weonefit 6 in Kick-Back PlateBest Lift Range | 21.65 x 18.9 x 12.2 in | 28.6 kg | Aluminum alloy | View on Amazon |
| 3 | 3. RisWhiteMeteors 6 in Electric PlateBest Electric Fit | — | — | — | View on Amazon |
| 4 | 4. Minke Marine 6 in Electric PlateElectric adjustment for 10–150 HP outboards | — | — | — | View on Amazon |
| 5 | 5. Vrtfil 6 in Electric PlateUniversal transom replacement seekers | 18.11 x 11.42 x 16.93 in | 51.8 lb | — | View on Amazon |
| 6 | 6. Winibo JPH1500 8 in PlateBest 8-Inch Setback | 16.54 x 11.02 x 17.72 in | 44.5 lb | Aluminum-Alloy, Stainless Steel | View on Amazon |
| 7 | 7. Bob's Machine 100-106010Highest Capacity | 6.02 x 16.73 x 13.78 in | 23 kg | Metal | View on Amazon |
| 8 | 8. RisWhiteMeteors ZZ002Heavy outboards needing 7.5-inch lift | 10 x 2 x 50 in | — | — | View on Amazon |
| 9 | 9. Hansefee Marine VL003A150–450 HP rigs seeking kick-back adjustment | 16 x 12 x 10 in | 65.5 lb | Steel, Stainless Steel, Aluminum | View on Amazon |
| 10 | 10. T-H Marine Atlas AHJ-4V-DPOwners prioritizing self-contained hydraulics | 18 x 10 x 6 in | 51 lb | Aluminum | View on Amazon |
Detailed Reviews: Best Hydraulic Jack Plate For 150 Hp Outboard

#1 · Best Overall
1. Bob's Machine 6 in Kick-Back Jac
- Weight: 65 lb
Best for: 150-hp fishing and shallow-water rigs.
Why it ranks #1: Its listing explicitly targets 150 hp and gives 7.5 inches of total lift from a 6-inch hydraulic stroke plus 1.5 inches of built-in lift.
Bob’s Machine pairs a 6-inch setback with 7.5 inches of total lift, including a 6-inch hydraulic stroke and 1.5 inches of built-in lift. That defined setup targets duck boats, jon boats, and fishing rigs, where motor-height control can support shallow-water access and handling within the listed 150 HP capacity.
The 6-inch hydraulic stroke plus 1.5-inch structural lift provides 7.5 inches of total adjustment, helping boaters position the motor for shallow-water conditions. Its 6-inch setback is specified for duck boats, jon boats, and fishing rigs, giving buyers a clear mounting configuration to compare with their installation needs. The product is identified as model 100-105100 and rated for 150 HP; its listed 65-pound weight is relevant when planning handling and mounting.
- 6-inch setback
- 7.5 inches of total lift
- 6-inch hydraulic stroke plus 1.5-inch built-in lift
- Specified for duck boats, jon boats, and fishing rigs
- At 65 pounds, the listed unit weight is substantial for handling during installation.
Skip it if you need an integrated internal pump to avoid a separate pump mount; Bob's Machine 100-106010 lists that feature.
For anglers with an outboard within the stated 150 HP rating, this Bob’s Machine plate offers a specified setback and lift combination for shallow-water positioning. Account for its 65-pound listed weight when planning installation and handling.
Full product details
| Brand | Bob's Machine |
|---|---|
| Item Weight | 65 pounds |
| Item model number | 100-105100 |
| Manufacturer | Bob's Machine |
| Part Number | 100-105100 |
| Model | 100-105100 |
| Dimensions | 23 x 19 x 12 inches |
| Additional Information | Important information |
Listed on Amazon as: Bob's Machine 6 in Hydraulic Kick-Back Jac 100-105100, 6 in Setback, 150 HP
View on Amazon
#2 · Best Lift Range
2. Weonefit 6 in Kick-Back Plate
- Dimensions: 21.65 x 18.9 x 12.2 in
- Weight: 28.6 kg
- Material: Aluminum alloy
Best for: Shallow-water rigs wanting 7.5-inch lift.
Why it ranks #2: The 150 hp listing specifies 7.5 inches total lift, combining a 6-inch hydraulic stroke with 1.5 inches of built-in lift.
A 7.5-inch total lift combines a 6-inch hydraulic stroke with 1.5 inches of built-in structural lift, giving this Weonefit kick-back plate a defined adjustment range. Its 6-inch setback is specified for duck boats, jon boats, bass boats, and fishing rigs, where raising and repositioning the outboard supports shallow-water access and handling.
The combined stroke and built-in lift provide 7.5 inches of total vertical adjustment, so the plate offers more travel than its 6-inch hydraulic stroke alone suggests. A 6-inch setback moves the mounting position as specified, while the product is presented for duck boats, jon boats, bass boats, and fishing rigs. Aluminum-alloy construction and a listed 28.6 kg weight help characterize the unit for installation planning; the supplied details do not give wiring or control information.
- 6-inch setback configuration
- 7.5 inches of total lift
- Combines 6-inch hydraulic stroke with 1.5-inch built-in lift
- Aluminum-alloy construction
- The supplied information does not specify electrical controls or wiring.
Skip it if you need listed electrical controls or wiring details; the supplied information does not provide them.
This suits fishing-rig owners seeking a 6-inch setback and 7.5 inches of total lift for motor repositioning and shallow-water use. Check the stated 150 HP rating against your engine, since the listing identifies that capacity.
Full product details
| Brand | Weonefit |
|---|---|
| Color | As Pics Shown |
| Included Components | 1x Boat Jack Plate |
| Item Dimensions | 21.65 x 18.9 x 12.2 inches |
| Item Weight | 28.6 kg |
| Dimensions | 21.65 x 18.9 x 12.2 inches |
| Manufacturer | Weonefit |
| Part Number | Weonefit 100-105100 100105100 |
| Manufacturer Warranty Description | 2 years |
| Material | Aluminum alloy |
| Model Number | Weonefit 100-105100 100105100 |
Listed on Amazon as: 6" Kick-Back Hydraulic Jack Plate 100-105100 150 HP 7.5" Lift
View on Amazon
#3 · Best Electric Fit
3. RisWhiteMeteors 6 in Electric Plate
Best for: 150-hp boats needing broad compatibility.
Why it ranks #3: Its stated 10–150 hp compatibility directly covers the target motor, with 6.7 inches of travel and a manual release valve.
A stated 10–150 HP range makes the RisWhiteMeteors plate a match for boats using outboards across that span, including many Mercury, Yamaha, Suzuki, and Honda engines. Its electric hydraulic adjustment and 6.7 inches of vertical travel let operators change motor height without manual repositioning, with a manual release valve also specified.
The 6.7-inch vertical travel gives room to adjust outboard mounting height for changing boating conditions, while electric hydraulic operation handles the lift without manual repositioning. Compatibility is stated for 10–150 HP motors and many mainstream engine brands, making the listed range useful when selecting for an existing setup. A manual release valve is included, though the supplied information does not explain its procedure or operating conditions; check the complete product documentation for those details before installation.
- Fits stated 10–150 HP outboard range
- Compatible with many Mercury, Yamaha, Suzuki, and Honda motors
- Provides 6.7 inches of vertical travel
- Electric hydraulic adjustment with manual release valve
- The supplied details do not specify setback or plate material.
Skip it if you need a stated setback measurement or plate material; neither is given in the supplied specifications.
For boaters with a 10–150 HP outboard seeking electric height adjustment across varied conditions, this plate offers a broad stated engine range. Its listed compatibility and travel are useful selection points, but setback and material details remain unspecified.
Full product details
| Brand | RisWhiteMeteors |
|---|---|
| Color | Black |
| Included Components | 1 Pack |
| Manufacturer | RisWhiteMeteors |
| Part Number | ZZ001 |
| Manufacturer Warranty Description | 12-Month |
| Model Number | 6 Inch Electric Hydraulic Jack Plate |
Listed on Amazon as: 6" Electric Hydraulic Jack Plate for 10-150 HP Outboard Motors, 6.7 Inch Vertical Travel, Manual Release Valve, Universal Fit ZZ001
View on AmazonWhy it ranks #4: This electric-hydraulic option lists compatibility from 10 to 150 hp and 6.7 inches of vertical travel, matching the target horsepower.
A 6.7-inch vertical travel range gives the Minke marine plate room to adjust motor height, while its electric hydraulic operation lets owners make those changes without manual repositioning. The stated 10–150 HP compatibility and universal-fit positioning suit marine upgrades or replacement of an existing part across many mainstream outboard engines.
The 6.7-inch travel is presented as a way to vary engine height, with the product description connecting that adjustment to trim angle, drag, and sailing performance. Electric hydraulic operation provides powered movement rather than manual repositioning, making height changes part of the boat’s setup workflow. Its stated 10–150 HP range and compatibility with most mainstream outboard engines help define the intended fit, while the included manual release valve adds a specified release feature.
- Stated compatibility with 10–150 HP outboards
- 6.7 inches of vertical travel
- Electric hydraulic adjustment
- Manual release valve
- The supplied specifications do not state a setback measurement.
Skip it if you need a specified setback dimension; this listing gives vertical travel but no setback measurement.
This is aimed at owners replacing or upgrading a 10–150 HP outboard mounting setup who want powered height changes and 6.7 inches of travel. The listing does not state setback, so that dimension remains a fit consideration.
Full product details
| Brand | Minke marine |
|---|---|
| Color | Black |
| Included Components | 1 |
| Manufacturer | Minke marine |
| Part Number | 6 Inch Electric Hydraulic Jack Plate |
| Manufacturer Warranty Description | 12-Month |
Listed on Amazon as: 6 Inch Electric Hydraulic Jack Plate Replacement for 10‐150HP Outboard Motors, 6.7" Vertical Travel with Manual Release Valve, Universal Boat Outboard Engine Fit VL001
View on Amazon
#5
5. Vrtfil 6 in Electric Plate
- Dimensions: 18.11 x 11.42 x 16.93 in
- Weight: 51.8 lb
Best for: Universal transom replacement seekers.
Why it ranks #5: Its listed 10–150 hp compatibility and 6.7-inch travel suit the target, though the supplied details do not specify a setback.
A standard universal transom-mount structure is specified for mainstream 10–150 HP outboards, making the Vrtfil plate a replacement-oriented option within that range. Its 6.7-inch vertical travel supports flexible engine-height adjustment, while the electric hydraulic format and manual release valve add powered movement and a stated release feature.
The universal transom-mount structure is described as matching mainstream 10–150 HP outboards and serving as a direct replacement, which can help buyers assess its role in an existing setup. Its 6.7 inches of vertical travel permits motor-height adjustment, with the description linking that adjustment to trim and hull-water drag. The electric hydraulic plate includes a manual release valve; its listed 51.8-pound weight is also worth considering when planning installation.
- Standard universal transom-mount structure
- Stated 10–150 HP compatibility
- 6.7 inches of vertical travel
- Electric hydraulic plate with manual release valve
- The listed unit weighs 51.8 pounds, a substantial load to handle during installation.
Skip it if you need a stated setback dimension or a lighter listed unit; neither is provided for this plate.
This fits owners seeking a transom-mount replacement for a mainstream 10–150 HP outboard, with 6.7 inches of electric hydraulic travel. Factor the listed 51.8-pound weight into installation planning; setback is not stated.
Full product details
| Brand | Vrtfil |
|---|---|
| Color | Black |
| Included Components | 1 Pack |
| Item Dimensions | 18.11 x 11.42 x 16.93 inches |
| Item Weight | 51.8 pounds |
| Dimensions | 18.11 x 11.42 x 16.93 inches |
| Manufacturer | Vrtfil |
| Part Number | Electric Hydraulic Jack Plate |
| Manufacturer Warranty Description | 12-Month |
| Model Number | 6" Electric Hydraulic Jack Plate |
Listed on Amazon as: 6" Electric Hydraulic Jack Plate, 6.7" Vertical Travel, Manual Release Valve, Universal Transom Mount for 10-150 HP Outboard Motors
View on Amazon
#6 · Best 8-Inch Setback
6. Winibo JPH1500 8 in Plate
- Dimensions: 16.54 x 11.02 x 17.72 in
- Weight: 44.5 lb
- Material: Aluminum-Alloy, Stainless Steel
Best for: Saltwater users wanting one-touch lift.
Why it ranks #6: The listing supports outboards up to 150 hp and gives 6.69 inches of stepless travel, but its 8-inch setback differs from the 6-inch options.
Electrophoresis coating and anodic protection give the Winibo plate specified corrosion-protection measures for saltwater environments. Its one-touch control operates a stepless 6.69-inch vertical lift, enabling motor-height changes at the press of a button, while the stated 7,055-pound lifting capacity and compatibility up to 150 HP define its intended load range.
The stepless 6.69-inch lift allows incremental height changes rather than limiting adjustment to listed steps, and one-touch operation makes raising or lowering the motor a button-press task. Electrophoresis coating and anodic protection are stated for corrosion resistance in harsh saltwater environments, relevant to marine exposure. The plate lists a 7,055-pound lifting capacity and outboard use up to 150 HP; its aluminum-alloy and stainless-steel materials also help buyers assess the specified construction.
- One-touch electric control
- Stepless 6.69-inch vertical lift
- Electrophoresis coating and anodic protection
- Listed lifting capacity of 7,055 pounds
- The listed warranty is one year.
Skip it if you need more than 150 HP compatibility; the listed application is for outboards up to 150 HP.
For owners of outboards up to 150 HP who value button-operated, stepless height changes and specified saltwater corrosion protection, Winibo’s feature set is relevant. Keep its stated engine limit in view when selecting for your motor.
Full product details
| Brand | Winibo |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Boat |
| Included Components | Electric Hydraulic Jack Plate |
| Item Dimensions | 16.54 x 11.02 x 17.72 inches |
| Item Weight | 44.5 pounds |
| Load Capacity | 7055 Pound |
| Manufacturer | Winibo |
| Part Number | JPH1500 |
| Manufacturer Warranty Description | 1 year warranty |
| Material | Aluminum-Alloy, Stainless Steel |
| Model Number | JPH1500 |
| Style Name | Electric Hydraulic Jack Plate |
Listed on Amazon as: 8" Electric Hydraulic Jack Plate for Outboard Motor up to 150HP
View on Amazon
#7 · Highest Capacity
7. Bob's Machine 100-106010
- Dimensions: 6.02 x 16.73 x 13.78 in
- Weight: 23 kg
- Material: Metal
Best for: High-power outboards needing integrated pump.
Why it ranks #7: This Bob's Machine plate is rated up to 300 hp and 625 lb, with 7.5 inches total lift, so it exceeds the target rating.
An integrated internal hydraulic pump eliminates the need for a separate pump mount, a useful rigging distinction on Bob’s Machine’s 6-inch setback plate. It is rated for outboards up to 300 HP and 625 pounds, with 7.5 inches of total lift from 6 inches of travel plus 1.5 inches of built-in lift.
The internal hydraulic pump keeps the pump within the plate rather than requiring a separate pump mount, simplifying the specified rigging arrangement. Its 6-inch setback combines with 6 inches of adjustable travel and 1.5 inches of built-in lift for 7.5 inches total, giving operators a stated range for positioning the outboard. A rating up to 300 HP and 625 pounds makes this a higher-capacity choice than a plate listed for 150 HP, so select according to the engine’s requirements.
- Integrated internal hydraulic pump
- No separate pump mount required
- Rated for outboards up to 300 HP and 625 pounds
- 7.5 inches total lift with 6-inch setback
- Its 300 HP capacity exceeds what a 150 HP-only setup requires.
Skip it if you only need a plate specifically rated for up to 150 HP; this model is rated to 300 HP and 625 pounds.
For owners whose rigging benefits from an integrated pump and whose outboard falls within the 300 HP, 625-pound rating, this Bob’s Machine plate offers defined setback and lift. Its higher capacity may exceed a 150 HP-only requirement.
Full product details
| Brand | Bob's Machine |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Boat |
| Included Components | Bob's Machine 100-106010 Action Series Jac Plate – 6", 300 HP Max |
| Item Dimensions | 6.02 x 16.73 x 13.78 inches |
| Item Weight | 23 kg |
| Load Capacity | 23 kg |
| Manufacturer | Bob's Machine |
| Part Number | 100-106010 |
| Material | Metal |
| Model Number | 100-106010 |
| Style Name | Adjustable |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Bob's Machine 6 in Jac Plate 100-106010, 6 in Setback – Rated up to 300 HP
View on Amazon
#8
8. RisWhiteMeteors ZZ002
- Dimensions: 10 x 2 x 50 in
Best for: Heavy outboards needing 7.5-inch lift.
Why it ranks #8: It offers 7.5 inches total lift and a stated 625 lb capacity, but its listing targets outboards up to 350 hp rather than specifically 150 hp.
A 625-pound lifting capacity and stated compatibility with outboards up to 350 HP distinguish this RisWhiteMeteors plate for higher-capacity applications. Its 7.5 inches of total lift combines 1.5 inches of built-in height with 6 inches of adjustable travel, while 7009 aviation-grade aluminum alloy and a corrosion-resistant finish specify its construction.
The 7.5-inch total lift combines built-in height with 6 inches of adjustable travel, giving the operator a stated range for vertical motor positioning. A 625-pound lifting capacity and up-to-350 HP compatibility define the listed application, while the 15 mm-thick 7009 aluminum-alloy plate specifies substantial structural material. Electrophoresis coating and anodic protection are cited for corrosion resistance, making those finish details relevant to marine exposure and maintenance considerations.
- Rated for outboards up to 350 HP
- 625-pound lifting capacity
- 7.5 inches total lift, including 6 inches of adjustable travel
- 7009 aluminum alloy with electrophoresis coating and anodic protection
- Its 350 HP rating is far above a 150 HP-only requirement.
Skip it if you want a plate specified only for a 150 HP outboard; this model is rated up to 350 HP.
This suits owners needing the stated 625-pound capacity, 7.5-inch lift, and compatibility up to 350 HP. For a 150 HP motor, weigh those higher-capacity specifications against your actual requirements and verify installation dimensions.
Full product details
| Brand | RisWhiteMeteors |
|---|---|
| Color | Black |
| Included Components | 1 Pack |
| Item Dimensions | 10 x 2 x 50 inches |
| Dimensions | 10 x 2 x 50 inches |
| Load Capacity | 625 pounds |
| Manufacturer | RisWhiteMeteors |
| Part Number | 150Hp-300Hp |
| Manufacturer Warranty Description | 12-Month |
| Model Number | Electric Hydraulic Jack Plate |
Listed on Amazon as: Electric Hydraulic Jack Plate for Outboard Motors up to 350HP, 7.5in Lift ZZ002
View on Amazon
#9
9. Hansefee Marine VL003A
- Dimensions: 16 x 12 x 10 in
- Weight: 65.5 lb
- Material: Steel, Stainless Steel, Aluminum
Best for: 150–450 HP rigs seeking kick-back adjustment.
Why it ranks #9: Its stated 150–450 hp range includes 150 hp and it has an 8-inch design, but the supplied details give no travel figure.
An 8-inch adjustable electric hydraulic plate with kick-back is specified for 150–450 HP outboards, placing the Hansefee model in a broader power range than a 150 HP-only setup. Its listed steel, stainless-steel, and aluminum construction identifies the materials, while the 8-inch configuration gives buyers a clear plate dimension to assess.
The 8-inch plate dimension and kick-back configuration define the mounting style for owners comparing jack plates for outboard setups. Electric hydraulic adjustment is identified in the product title, indicating powered motor positioning, while compatibility is stated for all outboard motors from 150 to 450 HP. The listed steel, stainless-steel, and aluminum materials and 65.5-pound weight are practical details for evaluating construction and planning handling during installation; the supplied facts do not give lift travel.
- 8-inch plate configuration
- Kick-back style
- Electric hydraulic adjustment
- Stated compatibility with 150–450 HP outboards
- The supplied information does not state vertical lift travel.
Skip it if you need a stated vertical travel measurement; this listing does not provide one.
This suits owners of 150–450 HP outboards seeking an 8-inch electric hydraulic kick-back plate. Its power range and configuration are specified, but the listing gives no vertical travel figure, an important boundary when comparing adjustment range.
Full product details
| Brand | Hansefee marine |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | ALL Outboard Motor (150-450HP) |
| Included Components | 1 Pack |
| Item Dimensions | 16 x 12 x 10 inches |
| Item Weight | 65.5 pounds |
| Load Capacity | 17637 pounds |
| Manufacturer | Hansefee marine |
| Part Number | VL003A |
| Manufacturer Warranty Description | 90 Day |
| Material | Steel, Stainless Steel, Aluminum |
| Model Number | VL003A |
| Style Name | Modern, Industrial, Heavy Duty, Classic |
Listed on Amazon as: 8" Adjustable Electric Hydraulic Jack Plate with Kick-Back for Outboard
View on Amazon
#10
10. T-H Marine Atlas AHJ-4V-DP
- Dimensions: 18 x 10 x 6 in
- Weight: 51 lb
- Material: Aluminum
Best for: Owners prioritizing self-contained hydraulics.
Why it ranks #10: This hydraulic plate lists a 4-inch setback and 1000 kg load capacity, but provides no stated horsepower range to confirm 150 hp fit.
A self-contained hydraulic pump system requires no reservoir or lines to install, making the T-H Marine Atlas a distinctive choice for buyers focused on simplifying hydraulic setup. Its 4-inch setback, rod-and-slot lifting design, and self-lubricating polymer rods define a different package from plates specified with larger setbacks or adjustment travel.
The self-contained pump system avoids installing a separate reservoir or hydraulic lines, reducing those specific components in the setup workflow. A rod-and-slot lifting design is described for trouble-free lifting action, while engineered polymer rods are stated to be six times more abrasion-resistant than steel and self-lubricating, so no grease is required. The 4-inch setback is a key fit dimension, and mounting hardware is not included, a practical point to account for during installation.
- Self-contained hydraulic pump system
- No reservoir or hydraulic lines to install
- Self-lubricating polymer rods require no grease
- 4-inch setback
- Mounting hardware is not included.
Skip it if you need mounting hardware in the package; this listing explicitly says it is not included.
For boaters who value a self-contained hydraulic system and self-lubricating rod design, the Atlas offers a 4-inch setback and no reservoir or lines to install. Plan separately for mounting hardware, which is not included.
Full product details
| Brand | T-H Marine |
|---|---|
| Color | Brushed |
| Compatible with Vehicle Type | Car |
| Included Components | Hydraulic Jack Plate, Mounting hardware NOT included, Owner's manual |
| Item Dimensions | 18 x 10 x 6 inches |
| Item Weight | 51 pounds |
| Load Capacity | 1000 kg |
| Manufacturer | T & H MARINE SUPPLIES |
| Part Number | AHJ-4V-DP |
| Manufacturer Warranty Description | Manufacturer Limited |
| Material | Aluminum |
| Model Number | AHJ-4V-DP |
| Style Name | Classic |
Listed on Amazon as: TH Marine Atlas Jack Plate, 4" Setback, Standard, Brushed
View on AmazonAvoid confusing travel with total lift
A listed lift figure may describe adjustable travel alone or total lift that includes a fixed built-in rise, so compare the definitions before choosing. Bob’s Machine 6 in Kick-Back Jac and Weonefit 6 in Kick-Back Plate each specify a 6-inch hydraulic stroke plus 1.5 inches of built-in lift, for 7.5 inches total. By contrast, the 6.7-inch figures on RisWhiteMeteors 6 in Electric Plate and Minke Marine 6 in Electric Plate are described as vertical travel.
Those numbers are not automatically equivalent to 7.5 inches total. A mismatch can leave the motor higher or lower than the adjustment you expected.
Check the plate’s installation instructions and measure your mounting geometry; do not use a headline lift number alone to predict the final propeller height or usable adjustment.
Check horsepower and mounting details together
A horsepower figure alone does not establish that a plate fits your boat and motor installation. Some listings give a target range, such as 10–150 hp for RisWhiteMeteors 6 in Electric Plate, while Bob’s Machine 6 in Kick-Back Jac identifies a 150 hp application. Others list broad ranges or capacities above the target, including Bob’s Machine 100-106010 at up to 300 hp and RisWhiteMeteors ZZ002 at up to 350 hp.
Those higher ratings do not confirm your transom dimensions, bolt pattern, engine weight, or clearance. Setback also varies: the options here include a 4-inch Atlas, 6-inch plates, and 8-inch designs.
Before ordering, verify the manufacturer’s fitment guidance against your hull, transom, motor, and existing hardware; the supplied product details do not resolve every installation-specific question.
How to Choose a Hydraulic Jack Plate
Horsepower fit
Look for a stated compatibility range that includes your motor’s horsepower, rather than assuming a higher maximum guarantees fit. RisWhiteMeteors 6 in Electric Plate, Minke Marine 6 in Electric Plate, and Vrtfil 6 in Electric Plate each list 10–150 hp; Bob’s Machine 6 in Kick-Back Jac is specified for 150 hp. Winibo JPH1500 is listed for up to 150 hp.
Wider-range options include Bob’s Machine 100-106010 at up to 300 hp and RisWhiteMeteors ZZ002 at up to 350 hp. Buyers with a confirmed 150 hp motor can favour the directly specified 150 hp choices; those considering a different engine should verify that exact motor and installation with the manufacturer.
Setback and lift
Choose setback and lift based on your hull and required motor-height adjustment, and verify how the listing defines lift. Weonefit 6 in Kick-Back Plate and Bob’s Machine 6 in Kick-Back Jac have a 6-inch setback and 7.5 inches total lift, including 1.5 inches built in. Several electric plates list 6.7 inches of vertical travel, while Winibo JPH1500 lists 6.69 inches and an 8-inch plate.
T-H Marine Atlas AHJ-4V-DP has a 4-inch setback, with no travel figure provided here. Buyers seeking a directly specified 6-inch setup can start with the kick-back options; those needing another setback should confirm clearance and fitment before selecting.
Actuation and construction
Decide whether electric-hydraulic adjustment or a conventional hydraulic design better suits your installation, then check the listed materials and included hardware. RisWhiteMeteors 6 in Electric Plate and Vrtfil 6 in Electric Plate identify electric-hydraulic operation; the first also lists a manual release valve. Bob’s Machine 6 in Kick-Back Jac is described as hydraulic, and Weonefit 6 in Kick-Back Plate lists aluminum alloy.
Winibo JPH1500 specifies aluminum alloy and stainless steel, while T-H Marine Atlas AHJ-4V-DP lists aluminum and says mounting hardware is not included. Buyers prioritizing electric adjustment can compare the electric options; those choosing a hydraulic plate should verify what controls, wiring, and installation parts their setup requires.
Which Jack Plate Should You Choose for a 150 hp Outboard?
For a plate explicitly matched to 150 hp with a defined total lift, choose Bob’s Machine 6 in Kick-Back Jac: it lists a 150 hp application and 7.5 inches total lift. If electric-hydraulic operation is your priority, RisWhiteMeteors 6 in Electric Plate is listed for 10–150 hp and has 6.7 inches of travel plus a manual release valve. Weonefit 6 in Kick-Back Plate also directly targets 150 hp and gives the same stated 7.5-inch total lift as the Bob’s option.
Choose Winibo JPH1500 if an 8-inch plate suits your installation and its stated up-to-150-hp rating matches your needs. Treat broader-rated plates as alternatives only after confirming motor, transom, and mounting compatibility.
Related Buying Guides
- Best Hydraulic Jack Plate For 60 Hp Outboard
- Best Hydraulic Steering For 150 Hp Outboard
- Best Hydraulic Jack Plate For 115 Hp Outboard
- Best Outboard Hydraulic Jack Plate
- Best Jack Plate For 90 Hp Outboard
- Best Jack Plate For 25 Hp Outboard
Frequently Asked Questions
How do I confirm that a jack plate fits my boat’s transom and bolt pattern?
Compare the plate’s mounting dimensions and bolt-hole pattern with your transom and outboard, using the boat and motor manufacturers’ specifications. Check that the transom can accept the plate and that the motor’s stated horsepower falls within the plate’s rating. If any dimensions or requirements are unclear, confirm them with the manufacturer or a qualified marine installer before purchase.
How much setback and vertical lift should I use for my hull and boating conditions?
Choose setback and lift based on your hull, outboard, transom, and typical load and water conditions; there is no universal best setting. Compare the plate’s stated setback and travel with your boat and motor requirements, and seek guidance from the hull or motor manufacturer or a qualified installer. Do not assume more setback or lift is automatically better.
What should I check before operating or maintaining an electric-hydraulic jack plate?
Before use, follow the plate manufacturer’s operating and maintenance instructions, check that the installation and mounting hardware are secure, and inspect the wiring and hydraulic components for visible damage or leakage. Keep hands clear of moving parts. If the model provides a manual release valve, learn its specified use before relying on it in an emergency.
What does a jack plate’s setback measurement tell me?
Setback describes how far the plate moves the outboard aft from its mounting position on the transom. Use the listed measurement to compare installation needs, but confirm that your hull, transom, motor, and intended setup can accommodate it. A setback figure alone does not establish whether a plate is compatible or suitable for your boat.
Is a higher horsepower rating enough to confirm a plate is suitable?
No. A broad or higher horsepower rating does not by itself confirm a match. Check the specific motor’s horsepower against the plate’s stated range, then verify transom and bolt-pattern compatibility, setback, lift, and operating type.
For a 150 hp application, prefer a listing that explicitly covers that capacity and compare its stated adjustment range.
Final Words
For a 150 hp outboard, Bob’s Machine 6 in Kick-Back Jac is the clearest match in this lineup: its listing specifies 150 hp and 7.5 inches of total lift. Choose the RisWhiteMeteors electric-hydraulic option if its 10–150 hp range, 6.7 inches of travel, and manual release suit your needs. Weonefit is another direct 150 hp alternative.
Before deciding, verify transom, bolt pattern, setback, and motor compatibility.



