Best Hydraulic Jack Plate For 115 Hp Outboard

Best Hydraulic Jack Plate For 115 Hp Outboard

A strong choice for a 115 hp outboard should explicitly cover that horsepower, provide useful vertical adjustment, and match your boat’s mounting needs. Bob’s Machine 100-105100 is a clear fit: its listing specifies 150 hp, a 6-inch setback, and 7.5 inches of total lift. Other options cover 10–150 hp or up to 150 hp, including electric hydraulic plates with 6.7 inches of travel and models with 8-inch setbacks.

Those figures are useful starting points, not proof that a plate will fit a particular transom or engine. Check the manufacturer’s compatibility guidance, mounting pattern, engine weight limits, and available space before buying.

This roundup compares the listed horsepower ranges, lift and setback details, materials, and dimensions so you can narrow the field.

Bob’s Machine 100-105100 is the leading choice for a 115 hp outboard because its listed 150 hp rating directly covers the application, and its 6-inch setback combines a 6-inch hydraulic stroke with 1.5 inches of built-in lift for 7.5 inches total. It is a hydraulic kick-back design described for fishing rigs, duck boats, and jon boats. Confirm that its mounting pattern and load limits suit your engine and transom; the supplied listing does not give a separate weight capacity.

Our Top Picks

Bob's Machine 100-105100Best Overall

Bob's Machine 100-105100

Its listed 150 hp rating covers a 115 hp outboard, while the 6-inch setback and 7.5 inches of total lift suit height adjustment.

View on Amazon
Winibo JPH1500Longest Setback

Winibo JPH1500

The listing specifies outboards up to 150 hp and an 8-inch plate, with 6.69 inches of stepless vertical lift.

View on Amazon
RisWhiteMeteors Electric PlateBroad HP Range

RisWhiteMeteors Electric Plate

Its stated 10–150 hp compatibility includes 115 hp, and it offers 6.7 inches of vertical travel plus a manual release valve.

View on Amazon

Compare Jack Plates for a 115 HP Outboard

#ProductWeightDimensionsMaterialBuy
165 lb——View on Amazon
2
Winibo JPH15002. Winibo JPH1500Longest Setback
44.5 lb16.54 x 11.02 x 17.72 inAluminum-Alloy, Stainless SteelView on Amazon
3———View on Amazon
4———View on Amazon
5
Bob's Machine 100-1060105. Bob's Machine 100-106010High-capacity integrated-pump setup
23 kg6.02 x 16.73 x 13.78 inMetalView on Amazon
6
Weonefit 100-1051006. Weonefit 100-105100Shallow-water fishing rig setup
28.6 kg21.65 x 18.9 x 12.2 inAluminum alloyView on Amazon
7
PURANOD ZZ0017. PURANOD ZZ001Manual-release electric height control
51.8 lb18.11"D x 11.42"W x 16.93"H—View on Amazon
8
Winibo JPH3500K8. Winibo JPH3500K12-volt kick-back electric lift
66 lb7.68"D x 14.17"W x 12.8"HAluminum, Stainless SteelView on Amazon
9
T-H Marine Atlas 4-inch9. T-H Marine Atlas 4-inchLow-maintenance hydraulic mechanism
51 lb18 x 10 x 6 inAluminumView on Amazon
10
Boating Accessories 100-10410010. Boating Accessories 100-104100Compact four-inch setback option
50.6 lb——View on Amazon

Detailed Reviews: Best Hydraulic Jack Plate For 115 Hp Outboard

Bob's Machine 100-105100

#1 · Best Overall

1. Bob's Machine 100-105100

  • Weight: 65 lb

Best for: Kick-back shallow-water fishing.

Why it ranks #1: Its listed 150 hp rating covers a 115 hp outboard, while the 6-inch setback and 7.5 inches of total lift suit height adjustment.

A 6-inch hydraulic stroke plus 1.5 inches of built-in lift gives this Bob’s Machine kick-back plate 7.5 inches of total lift, making shallow-water motor-height control its clearest use case. The listing identifies duck boats, jon boats, and fishing rigs as intended applications for this 150 hp model.

The 7.5-inch total lift combines adjustable hydraulic stroke with structural lift, giving a 115 hp operator a stated range for changing motor height. Its 6-inch setback kick-back arrangement is presented for duck boats, jon boats, and fishing rigs, with shallow-water access and handling cited as benefits. The model is specified for 150 hp, covering the target engine class. At 65 pounds, it is a sizeable assembly to account for during installation and transom handling.

Pros
  • 7.5 inches of total lift
  • 6-inch hydraulic stroke plus 1.5-inch built-in lift
  • 150 hp model includes a 115 hp outboard
  • Kick-back format is listed for shallow-water fishing rigs
Cons
  • The listed 65-pound weight makes installation handling demanding.

Skip it if you need a lighter listed assembly; Bob’s Machine 100-106010 is listed at 23 kg, though its capacity is higher.

For a 115 hp owner fishing shallow water from a duck boat, jon boat, or similar rig, this Bob’s Machine kick-back model offers a defined lift range. Its 65-pound weight is a handling boundary.

Full product details
BrandBob's Machine
Item Weight‎65 pounds
Item model number‎100-105100
Manufacturer‎Bob's Machine
Part Number‎100-105100
Model‎100-105100
Dimensions‎23 x 19 x 12 inches
Additional InformationImportant information

Listed on Amazon as: Bob's Machine 6 in Hydraulic Kick-Back Jac 100-105100, 6 in Setback, 150 HP

View on Amazon
Winibo JPH1500

#2 · Longest Setback

2. Winibo JPH1500

  • Weight: 44.5 lb
  • Dimensions: 16.54 x 11.02 x 17.72 in
  • Material: Aluminum-Alloy, Stainless Steel

Best for: Saltwater electric height adjustment.

Why it ranks #2: The listing specifies outboards up to 150 hp and an 8-inch plate, with 6.69 inches of stepless vertical lift.

Electrophoresis coating and anodic protection distinguish this Winibo electric hydraulic plate for boaters concerned with saltwater exposure. Its 6.69-inch stepless vertical lift is operated by one-touch control, providing a 115 hp owner with convenient motor-height adjustment across the stated travel range.

One-touch operation raises or lowers the motor through 6.69 inches of stepless vertical travel, allowing incremental height adjustment without a stepped range. The stated application covers outboards up to 150 hp, which includes a 115 hp engine. Electrophoresis coating and anodic protection are specified for corrosion resistance in harsh saltwater environments. The 8-inch plate format and 44.5-pound listed weight are practical considerations for transom fit and installation handling.

Pros
  • One-touch electric hydraulic height control
  • 6.69-inch stepless vertical lift
  • Stated application up to 150 hp includes 115 hp
  • Electrophoresis coating and anodic protection for saltwater environments
Cons
  • Its 8-inch plate format requires room for that setback.

Skip it if you need a 6-inch plate format; RisWhiteMeteors ZZ001 is specified as a 6-inch electric hydraulic jack plate.

A 115 hp boater seeking stepless electric adjustment and stated saltwater corrosion treatments may find this Winibo relevant. Its 8-inch format and 44.5-pound weight deserve consideration during transom planning.

Full product details
BrandWinibo
ColorBlack
Compatible with Vehicle TypeBoat
Included ComponentsElectric Hydraulic Jack Plate
Item Dimensions16.54 x 11.02 x 17.72 inches
Item Weight44.5 pounds
Load Capacity7055 Pound
ManufacturerWinibo
Part NumberJPH1500
Manufacturer Warranty Description1 year warranty
MaterialAluminum-Alloy, Stainless Steel
Model NumberJPH1500
Style NameElectric Hydraulic Jack Plate

Listed on Amazon as: 8" Electric Hydraulic Jack Plate for Outboard Motor up to 150HP

View on Amazon
RisWhiteMeteors Electric Plate

#3 · Broad HP Range

3. RisWhiteMeteors Electric Plate

Best for: Broad-fit 115 hp adjustability.

Why it ranks #3: Its stated 10–150 hp compatibility includes 115 hp, and it offers 6.7 inches of vertical travel plus a manual release valve.

A 6.7-inch vertical travel range is the key advantage of this electric hydraulic plate, giving a 115 hp outboard meaningful mounting-height adjustment. Its stated 10–150 hp range includes this engine class, and compatibility lists Mercury, Yamaha, Suzuki, Honda, and other brands.

Electric hydraulic operation lets the operator adjust engine height without manually repositioning the motor, while the 6.7-inch travel provides room to change mounting height for different boating conditions. The stated 10–150 hp application brackets a 115 hp outboard, and the listed compatibility with several major engine brands broadens its potential fit. A manual release valve adds an alternative release method. Consider the 6-inch plate format when checking how it suits the boat’s transom arrangement.

Pros
  • 6.7-inch vertical travel for height adjustment
  • Electric hydraulic lift avoids manual repositioning
  • Stated 10–150 hp application includes 115 hp
  • Manual release valve provides an alternative release method
Cons
  • Its 6-inch plate format may not suit boats requiring a different setback.

Skip it if you need a stated 8-inch setback or a kick-back configuration; this listing specifies a 6-inch plate instead.

For a 115 hp owner seeking electrically controlled height changes across varied boating conditions, this RisWhiteMeteors plate offers a broad stated horsepower range. Its 6-inch format remains a transom-fit consideration.

Full product details
BrandRisWhiteMeteors
ColorBlack
Included Components1 Pack
ManufacturerRisWhiteMeteors
Part NumberZZ001
Manufacturer Warranty Description12-Month
Model Number6 Inch Electric Hydraulic Jack Plate

Listed on Amazon as: 6" Electric Hydraulic Jack Plate for 10-150 HP Outboard Motors, 6.7 Inch Vertical Travel, Manual Release Valve, Universal Fit ZZ001

View on Amazon
Minke Marine Electric Plate

#4 · Manual Release

4. Minke Marine Electric Plate

Best for: Universal-range replacement plate.

Why it ranks #4: The listed 10–150 hp range covers the target engine, and the 6.7-inch travel and manual release valve provide useful adjustment details.

A stated 10–150 hp range makes this Minke marine electric hydraulic plate relevant to a 115 hp replacement or upgrade, while its 6.7-inch vertical travel enables engine-height changes. The listing also includes a manual release valve, giving the system an alternative release option.

Electric hydraulic lifting allows height adjustment without manually repositioning the motor, and 6.7 inches of vertical travel provides a substantial range for changing mounting height. The stated compatibility from 10 to 150 hp encompasses a 115 hp outboard, and the product is described for marine upgrades and old-part replacement. A manual release valve adds an alternative release method. The listing gives a 6-inch plate designation, so buyers should account for that configuration when planning the transom setup.

Pros
  • 6.7-inch vertical travel
  • Electric hydraulic lift for motor-height adjustment
  • Stated 10–150 hp compatibility includes 115 hp
  • Manual release valve offers an alternative release method
Cons
  • Its stated 6-inch plate configuration may not suit a different setback requirement.

Skip it if you need the listed 8-inch format; Winibo JPH1500 specifies an 8-inch electric hydraulic plate for outboards up to 150 hp.

A 115 hp owner replacing an older plate or seeking electric hydraulic adjustment can consider this Minke marine unit. Its stated 6-inch configuration and 6.7-inch travel define the fit and adjustment boundaries.

Full product details
BrandMinke marine
ColorBlack
Included Components1
ManufacturerMinke marine
Part Number6 Inch Electric Hydraulic Jack Plate
Manufacturer Warranty Description12-Month

Listed on Amazon as: 6 Inch Electric Hydraulic Jack Plate Replacement for 10‐150HP Outboard Motors, 6.7" Vertical Travel with Manual Release Valve, Universal Boat Outboard Engine Fit VL001

View on Amazon
Bob's Machine 100-106010

#5

5. Bob's Machine 100-106010

  • Weight: 23 kg
  • Dimensions: 6.02 x 16.73 x 13.78 in
  • Material: Metal

Best for: High-capacity integrated-pump setup.

Why it ranks #5: Its 6-inch setback plate is rated up to 300 hp and combines 6 inches of adjustable travel with 1.5 inches of built-in lift.

An integrated internal hydraulic pump eliminates the need for a separate pump mount, making this Bob’s Machine plate especially relevant to boaters organizing a 115 hp installation. Its 6-inch setback combines 1.5 inches of built-in lift with 6 inches of adjustable travel for 7.5 inches total lift.

The one-piece 6-inch setback format and integrated pump join mounting and hydraulic functions in a single assembly, avoiding a separate pump mount. Built-in lift of 1.5 inches plus 6 inches of adjustable travel gives 7.5 inches total lift, allowing engine-position changes within that range. The plate is rated for outboards up to 300 hp and 625 pounds, leaving stated capacity headroom for a 115 hp motor. Its 23 kg listed weight is relevant when planning handling and installation.

Pros
  • Integrated internal hydraulic pump needs no separate pump mount
  • 6-inch setback with 7.5 inches total lift
  • Rated up to 300 hp
  • Stated motor weight capacity is 625 pounds
Cons
  • The listed 23 kg plate weight is substantial to handle during installation.

Skip it if you need 8 inches of setback; Winibo JPH1500 is listed as an 8-inch electric hydraulic plate.

A boater prioritizing integrated hydraulic packaging and broad capacity can consider this Bob’s Machine model for a 115 hp outboard. Its 6-inch setback and 23 kg weight are important installation-planning boundaries.

Full product details
BrandBob's Machine
ColorSilver
Compatible with Vehicle TypeBoat
Included ComponentsBob's Machine 100-106010 Action Series Jac Plate – 6", 300 HP Max
Item Dimensions6.02 x 16.73 x 13.78 inches
Item Weight23 kg
Load Capacity23 kg
ManufacturerBob's Machine
Part Number100-106010
MaterialMetal
Model Number100-106010
Style NameAdjustable
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: Bob's Machine 6 in Jac Plate 100-106010, 6 in Setback – Rated up to 300 HP

View on Amazon
Weonefit 100-105100

#6

6. Weonefit 100-105100

  • Weight: 28.6 kg
  • Dimensions: 21.65 x 18.9 x 12.2 in
  • Material: Aluminum alloy

Best for: Shallow-water fishing rig setup.

Why it ranks #6: The listing specifies a 150 hp application, 6-inch setback, and 7.5 inches of total lift, though fit details should be verified.

A 7.5-inch total lift pairs 6 inches of hydraulic stroke with 1.5 inches of built-in lift, giving a 115 hp fishing rig substantial stated vertical adjustment. The 6-inch setback kick-back format is specifically presented for duck boats, jon boats, bass boats, and fishing rigs.

The hydraulic stroke and built-in structural lift combine to provide 7.5 inches total vertical adjustment, so buyers can evaluate the plate against their desired engine-height range. Its 6-inch setback kick-back configuration is aimed at repositioning outboards on fishing-oriented boats, including duck boats, jon boats, and bass boats. The listing specifies a 150 hp application, encompassing a 115 hp motor. At 28.6 kg, the plate’s listed weight is relevant when preparing for handling and mounting.

Pros
  • 7.5 inches total lift from hydraulic stroke and built-in lift
  • 6-inch setback kick-back configuration
  • 150 hp application includes a 115 hp outboard
  • Named use cases include jon boats and bass boats
Cons
  • Its listed weight is 28.6 kg, a substantial component to handle.

Skip it if you need electric one-touch height control; Winibo JPH1500 lists electric hydraulic operation and an 8-inch plate.

This Weonefit plate suits a 115 hp owner outfitting a fishing, duck, or jon boat and seeking the stated kick-back format and 7.5 inches of lift. Plan around its 28.6 kg listed weight.

Full product details
BrandWeonefit
ColorAs Pics Shown
Included Components1x Boat Jack Plate
Item Dimensions21.65 x 18.9 x 12.2 inches
Item Weight28.6 kg
Dimensions21.65 x 18.9 x 12.2 inches
ManufacturerWeonefit
Part NumberWeonefit 100-105100 100105100
Manufacturer Warranty Description2 years
MaterialAluminum alloy
Model NumberWeonefit 100-105100 100105100

Listed on Amazon as: 6" Kick-Back Hydraulic Jack Plate 100-105100 150 HP 7.5" Lift

View on Amazon
PURANOD ZZ001

#7

7. PURANOD ZZ001

  • Weight: 51.8 lb
  • Dimensions: 18.11"D x 11.42"W x 16.93"H

Best for: Manual-release electric height control.

Why it ranks #7: Its 10–150 hp application includes a 115 hp outboard, with 6.7 inches of vertical travel and a manual release valve.

A built-in manual release valve distinguishes this PURANOD electric hydraulic plate, providing an alternative lowering option alongside powered motor-height adjustment. Its 6.7-inch vertical travel and stated 10–150 hp application make it relevant to owners positioning a 115 hp outboard.

The electric hydraulic lift changes outboard height without manual repositioning, and its 6.7-inch vertical travel provides a stated adjustment range. The manual release valve supplies an alternative lowering option, adding a non-powered release method to the listed control setup. Its 10–150 hp application includes 115 hp, and the listing names Yamaha, Suzuki, Mercury, and Mercruiser among compatible outboard brands. The listed 51.8-pound weight is relevant when planning plate handling and installation.

Pros
  • 6.7-inch vertical travel
  • Electric hydraulic adjustment without manual repositioning
  • Manual release valve provides alternative lowering
  • Stated 10–150 hp range includes 115 hp
Cons
  • Its listed 51.8-pound weight is a substantial installation-handling consideration.

Skip it if you need a stated 8-inch plate format; Winibo JPH1500 is specified as an 8-inch electric hydraulic plate.

A 115 hp owner seeking powered height adjustment with a manual release option can consider this PURANOD plate. Its 6.7-inch travel, 51.8-pound weight, and listed engine compatibility shape the fit decision.

Full product details
BrandPURANOD
ColorBlack
Included Components1 Pack
Dimensions18.11"D x 11.42"W x 16.93"H
Item Weight51.8 pounds
ManufacturerPURANOD
Part NumberZZ001
Manufacturer Warranty Description12-Month
Model NumberZZ001

Listed on Amazon as: Electric Hydraulic Jack Plate for 10-150HP Outboard Motors, 6.7" Vertical Travel, Manual Release Valve, Marine Lift System

View on Amazon
Winibo JPH3500K

#8

8. Winibo JPH3500K

  • Weight: 66 lb
  • Dimensions: 7.68"D x 14.17"W x 12.8"H
  • Material: Aluminum, Stainless Steel

Best for: 12-volt kick-back electric lift.

Why it ranks #8: This electric hydraulic plate includes kick-back and a 12-volt specification, but the supplied listing does not state an engine horsepower range.

The 12-volt electric operation and kick-back format are the defining details of this Winibo plate, which is specified for electric hydraulic lifting and tilting of boat outboards. Its 8-inch size gives a 115 hp buyer a clear setback configuration to evaluate for the transom.

The 12-volt specification identifies the electrical system associated with the plate’s electric operating mode, while the listed recommended use is lifting and tilting boat outboard motors. The kick-back configuration distinguishes it from a standard electric plate, and the 8-inch designation gives buyers a specific format to plan around. Aluminum and stainless steel are the listed materials. The listing does not state a horsepower ceiling, so it does not establish that a particular 115 hp motor falls within a rated range.

Pros
  • 12-volt electric operation
  • Kick-back configuration
  • Listed for boat outboard motor lift and tilt
  • Aluminum and stainless steel construction
Cons
  • The supplied listing does not state a horsepower capacity.

Skip it if you need an explicit horsepower rating; Winibo JPH1500 specifies outboards up to 150 hp.

This Winibo is relevant to a 115 hp buyer seeking an 8-inch, 12-volt electric kick-back plate for outboard lift and tilt. The missing stated horsepower capacity is a key fit boundary to resolve.

Full product details
BrandWinibo
ColorBlack
Included Components8" Electric Hydraulic Jack Plate with Kick-Back
Dimensions7.68"D x 14.17"W x 12.8"H
Item Weight66 pounds
ManufacturerWinibo
Part NumberJPH3500K
Manufacturer Warranty Description1 year warranty
MaterialAluminum, Stainless Steel
Model NumberJPH3500K
Operation ModeElectric
Recommended UsesBoat Outboard Motor Electric Hydraulic Lift & Tilt
Voltage12 volts

Listed on Amazon as: 8" Electric Hydraulic Jack Plate with Kick-Back for Outboard Motor

View on Amazon
T-H Marine Atlas 4-inch

#9

9. T-H Marine Atlas 4-inch

  • Weight: 51 lb
  • Dimensions: 18 x 10 x 6 in
  • Material: Aluminum

Best for: Low-maintenance hydraulic mechanism.

Why it ranks #9: Its self-contained hydraulic pump and 4-inch setback are useful details, but the listing does not specify a horsepower rating for matching a 115 hp engine.

Self-lubricating polymer rods are the defining feature of this T-H Marine Atlas plate, removing the need for grease and simplifying routine maintenance. Its self-contained hydraulic pump system also needs no reservoir or lines to install, a practical distinction for a 115 hp owner planning the rigging workflow.

The self-contained pump system avoids installing a separate reservoir or hydraulic lines, which can simplify the hydraulic portion of a boat’s setup. Its rod-and-slot lifting design is described as providing trouble-free action, while the engineered polymer rods are stated to be six times more abrasion resistant than steel and self-lubricating, so no grease is required. The plate has a 4-inch setback. Mounting hardware is not included, so installation planning must account for sourcing that hardware separately.

Pros
  • Self-contained pump system needs no reservoir or lines to install
  • Self-lubricating polymer rods require no grease
  • Polymer rods are stated to be six times more abrasion resistant than steel
  • 4-inch setback configuration
Cons
  • Mounting hardware is not included.

Skip it if you want supplied mounting hardware; Bob’s Machine 100-104100 is listed with a 4-inch setback and aircraft-grade aluminum.

For a 115 hp owner who values simplified hydraulic routing and low-maintenance lifting components, the Atlas offers distinct practical benefits. Account for its 4-inch setback and separately sourced mounting hardware before installation.

Full product details
BrandT-H Marine
ColorBrushed
Compatible with Vehicle TypeCar
Included ComponentsHydraulic Jack Plate, Mounting hardware NOT included, Owner's manual
Item Dimensions18 x 10 x 6 inches
Item Weight51 pounds
Load Capacity1000 kg
ManufacturerT & H MARINE SUPPLIES
Part NumberAHJ-4V-DP
Manufacturer Warranty DescriptionManufacturer Limited
MaterialAluminum
Model NumberAHJ-4V-DP
Style NameClassic

Listed on Amazon as: TH Marine Atlas Jack Plate, 4" Setback, Standard, Brushed

View on Amazon
Boating Accessories 100-104100

#10

10. Boating Accessories 100-104100

  • Weight: 50.6 lb

Best for: Compact four-inch setback option.

Why it ranks #10: The listing gives 4 inches of setback and 7.5 inches of total lift, but provides no horsepower rating or explicit 115 hp compatibility.

A 4-inch setback paired with 7.5 inches of total lift defines this hydraulic Bob’s Machine Shop plate for a 115 hp setup. Its aircraft-grade aluminum construction is another concrete point of distinction for buyers comparing plate material and transom positioning.

The 4-inch setback provides a defined mounting configuration, while 7.5 inches of total lift above the stock location gives the operator a stated vertical adjustment range. Aircraft-grade aluminum is specified as the material, a useful construction detail when selecting a plate. The model identifier is 100-104100, and the listed dimensions are 4.02 by 16.73 by 13.78 inches. The supplied details do not state a horsepower rating, so they do not verify capacity for a 115 hp motor.

Pros
  • 4-inch setback configuration
  • 7.5 inches of total lift above stock location
  • Aircraft-grade aluminum construction
  • Listed dimensions support transom-space planning
Cons
  • No horsepower capacity is stated in the supplied product details.

Skip it if you require a stated 115 hp capacity; Bob’s Machine 100-105100 is listed as a 150 hp kick-back plate.

A 115 hp buyer interested in a 4-inch setback and 7.5 inches of lift can assess this aluminum Bob’s Machine plate against the boat’s space. Its unstated horsepower capacity remains a central fit boundary.

Full product details
BrandBoating Accessories
Item Weight‎50.6 pounds
Item model number‎100-104100
Manufacturer‎Boating Accessories
Part Number‎100-104100
Dimensions‎4.02 x 16.73 x 13.78 inches

Listed on Amazon as: Boating Accessories New Jack Plate 4" Hydraulic Bob's Machine Shop 100-104100

View on Amazon

Why horsepower compatibility is not the whole fit

A stated horsepower range does not by itself confirm that a jack plate fits your engine and transom. Several products here say they suit motors up to 150 hp, but the supplied listings do not consistently give engine weight limits, bolt patterns, or transom-specific installation requirements. The Bob’s Machine 100-105100 listing specifies 150 hp, while Bob’s Machine 100-106010 gives a separate capacity of up to 625 lb and a 300 hp rating; those are different models, so do not transfer one model’s capacity to another.

Before ordering, match the engine’s actual weight and mounting arrangement to the plate manufacturer’s instructions, and verify the boat’s transom can support the setup. Also check whether mounting hardware is included: the T-H Marine Atlas 4-inch listing explicitly says mounting hardware is not included.

A horsepower match is a useful filter, not a complete fit check.

Setback, lift, and operating trade-offs

Setback and lift describe different aspects of a jack plate, so compare both rather than treating one as a substitute for the other. Bob’s Machine 100-105100 and Bob’s Machine 100-106010 list 6 inches of setback and 7.5 inches of total lift, including 1.5 inches of built-in lift. The Winibo JPH1500 has an 8-inch plate and 6.69 inches of stepless vertical lift, while the electric 10–150 hp models list 6.7 inches of travel without a stated setback in the supplied details.

A kick-back design may appeal to buyers prioritizing the listed shallow-water use case, while electric hydraulic models offer powered height adjustment; those differences do not establish which setup will perform better on your specific boat. Consider available transom space and the manufacturer’s fit guidance, and avoid assuming that similar lift figures mean identical installation or operation.

How to Choose a Hydraulic Jack Plate

Horsepower rating

Look for a stated horsepower range or maximum that includes your 115 hp outboard. RisWhiteMeteors Electric Plate, Minke Marine Electric Plate, and PURANOD ZZ001 list 10–150 hp; Winibo JPH1500 and Weonefit 100-105100 specify up to or a 150 hp application. Bob’s Machine 100-105100 is listed at 150 hp, while Bob’s Machine 100-106010 is rated up to 300 hp.

A higher maximum does not by itself establish a better fit, so verify engine weight and model compatibility as well. Buyers who want an explicit 115 hp match should favour listings that state a 150 hp range or rating; for products without a stated horsepower figure, confirm compatibility with the manufacturer before choosing.

Lift travel and setback

Choose lift and setback figures that suit your boat’s installation needs, and distinguish adjustable travel from total lift. Bob’s Machine 100-105100 and Bob’s Machine 100-106010 list a 6-inch hydraulic stroke plus 1.5 inches of built-in lift, for 7.5 inches total. Winibo JPH1500 lists 6.69 inches of stepless vertical lift and an 8-inch plate, while the RisWhiteMeteors, Minke Marine, and PURANOD electric plates list 6.7 inches of travel.

The Weonefit listing gives a 6-inch setback and 7.5 inches total lift. Buyers who need the stated 6-inch setback and kick-back style can compare the Bob’s Machine 100-105100 and Weonefit; those seeking more listed plate setback can consider Winibo JPH1500, subject to fit checks.

Hydraulic operation and release

Compare how each plate is operated and whether its listing identifies a manual release. RisWhiteMeteors Electric Plate, Minke Marine Electric Plate, and PURANOD ZZ001 each describe electric hydraulic operation and a manual release valve. Winibo JPH1500 is described as one-touch electric control with stepless lift, while Winibo JPH3500K lists electric operation and 12 volts but does not provide a horsepower range in the supplied details.

Bob’s Machine 100-105100 is a hydraulic kick-back plate rather than one of the listed 6.7-inch electric options. Buyers wanting powered height adjustment and a stated manual lowering option should focus on the electric models that explicitly list a release valve; buyers considering another operating style should verify its controls and installation requirements.

Which Jack Plate Fits a 115 Hp Outboard?

For a direct 115 hp match with specified setback and total lift, choose Bob’s Machine 100-105100: it is listed for 150 hp, with a 6-inch setback and 7.5 inches of total lift. If you prefer an electric hydraulic plate with the greatest listed plate setback among the clearly horsepower-matched choices, consider Winibo JPH1500, rated up to 150 hp with 8 inches of plate and 6.69 inches of lift. For a 10–150 hp range and a manual release valve, compare RisWhiteMeteors Electric Plate, Minke Marine Electric Plate, and PURANOD ZZ001.

Bob’s Machine 100-106010 is a higher-rated alternative with a 300 hp maximum, but check its listed 625 lb capacity against your motor. Verify transom, mounting, and engine-weight compatibility before ordering.

Frequently Asked Questions

How do I confirm a jack plate fits my outboard’s mounting pattern and transom?

Check the plate and outboard mounting patterns against the manufacturer’s installation information, then verify that your transom can accommodate the plate’s setback and mounting requirements. Do not rely on a universal-fit description alone. If the listing does not provide enough detail, confirm compatibility with the manufacturer or a qualified marine installer before ordering.

What engine weight and transom limits should I check before installation?

Confirm the plate’s maximum engine weight or load capacity, its horsepower rating, and your transom’s limits before installation. These are separate checks: a horsepower rating does not establish a weight capacity. For example, the Bob’s Machine 100-105100 listing gives a 150 hp rating but no separate weight capacity, so verify that limit for your engine.

Will raising an outboard with a jack plate improve shallow-water operation on my boat?

It may help, but the result depends on your boat, outboard, setup, and operating conditions. A jack plate changes the engine’s height relative to the transom; the listings describe vertical travel or lift, but do not promise a particular shallow-water result. Confirm fit and follow the plate and engine guidance when adjusting height.

How should I compare setback and lift figures?

Compare each listing’s stated setback and lift separately, and check whether lift refers to vertical travel or total lift. Bob’s Machine 100-105100 is listed with a 6-inch setback, a 6-inch hydraulic stroke, and 1.5 inches of built-in lift, for 7.5 inches total. Do not assume similarly named measurements are equivalent across plates.

When should I consider a plate rated above my outboard’s horsepower?

A higher horsepower rating can be an option, but it does not confirm that the plate suits your engine’s weight, mounting pattern, or transom. Bob’s Machine 100-106010 is listed for up to 300 hp and has a stated 625 lb capacity; compare that capacity with your motor and verify all other fit limits before choosing it.

Final Words

For a 115 hp outboard, Bob’s Machine 100-105100 is the leading choice in these listings: its 150 hp rating covers the application, and its stated 6-inch setback and 7.5 inches of total lift are clearly specified. Consider Winibo JPH1500 if you prefer an electric hydraulic plate with 8 inches of setback. Before ordering either—or another option—confirm mounting pattern, engine weight, and transom compatibility.

Leave a Reply

Your email address will not be published. Required fields are marked *