Best Hydraulic Jack For Gooseneck Trailer: 10 Options Compared

#1 · Best Overall

1. Johnson Trailer Parts Dexter 24K Kit

• Load Capacity: 24,000 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer

Best for: Synchronized dual-jack lifting.

Why it ranks #1: Explicitly listed for gooseneck trailers, this complete system pairs two 12,000-pound jacks with a KTI double-acting pump and a flow divider.

Two 12,000-pound hydraulic jacks and a flow divider give this Dexter kit a stated 24,000-pound combined lifting capacity with synchronized operation. That pairing suits buyers who want both trailer jacks to raise evenly, while the KTI double-acting pump provides push-button power-up and power-down control for gooseneck, dump, and cargo trailers.

The flow divider distributes fluid evenly to both jacks, connecting the dual 12,000-pound cylinders with the kit's 24,000-pound lifting claim for coordinated raising. Each jack uses a 2-by-20-inch cylinder, and the KTI pump is rated at 2 GPM and up to 3,200 PSI. Double-acting operation powers both raising and lowering, so the push-button workflow controls movement in both directions. The kit includes hoses, jack covers, and the hydraulic power unit.

Skip it if you need one jack rather than a dual setup; the Dexter 12,000 lb Hydraulic Trailer Jack Kit uses a single power jack.

This kit fits gooseneck owners seeking synchronized lifting from two powered jacks, and also lists dump and cargo trailers as applications. Its dual-jack layout and 24,000-pound combined rating are the key fit considerations.

Listed on Amazon as: Dexter 24,000 lb Hydraulic Trailer Jack Kit – Dual 12,000 lb Power Jacks – KTI Double Acting Pump – Electric Hydraulic – for Dump, Cargo & Gooseneck Trailers

#2 · Best Single-Jack Kit

2. Johnson Trailer Parts Dexter 12K Kit

• Load Capacity: 12,000 lb
• Material: Steel
• Compatible with Vehicle Type: Trailers

Best for: Single-jack powered setup.

Why it ranks #2: A gooseneck-listed single-jack kit with 12,000-pound capacity, KTI double-acting pump, and controlled power-up and power-down operation.

A single 12,000-pound jack paired with a KTI double-acting pump gives this Dexter kit powered raising and lowering without a dual-jack arrangement. Its 2-by-20-inch cylinder and push-button operation suit gooseneck, dump, and cargo trailer owners who want a complete hydraulic unit for one lifting point.

The 12,000-pound single jack uses a 2-by-20-inch cylinder, while the KTI power unit is specified at 2 GPM and up to 3,200 PSI. Together, those features support the kit's push-button lifting workflow; double-acting hydraulics also power the descent rather than limiting powered control to raising. The package lists a jack cover, battery cables, and 48-inch hydraulic hoses, giving buyers several system components in one kit.

Skip it if you want two synchronized jacks and 24,000-pound combined capacity; the Dexter 24,000 lb Hydraulic Trailer Jack Kit supplies a dual setup.

Choose this Dexter kit if your gooseneck setup calls for one 12,000-pound powered lifting point and controlled movement in both directions. Buyers seeking synchronized support from two jacks should consider its single-jack configuration a boundary.

Listed on Amazon as: Dexter 12,000 lb Hydraulic Trailer Jack Kit – Single Power Jack – KTI Double Acting Pump – Electric Hydraulic – for Dump, Cargo & Gooseneck Trailers

#3 · Best Hydraulic Add-On

3. Johnson Trailer Parts Dexter Add-On Kit

• Load Capacity: 12,000 lb
• Material: Steel
• Compatible with Vehicle Type: RVs, Trailers

Best for: Existing-hydraulic-system add-on.

Why it ranks #3: Listed for gooseneck use, this 12,000-pound single jack includes a selector valve and hoses for connection to an existing hydraulic power unit.

A billet aluminum six-port selector valve lets this Dexter 12,000-pound jack kit connect to an existing hydraulic power unit, avoiding replacement of the current system. Its single 2-by-20-inch-cylinder jack brings push-button lifting to dump, cargo, and gooseneck trailers, making system integration the central buyer consideration.

The add-on kit is intended to connect to an existing hydraulic power unit, and its selector valve manages hydraulic flow between the jack and other functions. That can make it a practical route to add one lifting point while retaining a current system. The single jack has a 12,000-pound capacity and a 2-by-20-inch cylinder; included 48-inch hoses and adapter fittings support the stated hydraulic connection workflow. Push-button operation provides the listed control method.

Skip it if you lack an existing hydraulic power unit; the Dexter 12,000 lb Hydraulic Trailer Jack Kit includes a KTI pump.

Choose this Dexter add-on if your gooseneck already has a hydraulic power unit and you want one 12,000-pound jack with selector-valve control. The existing-system requirement is its key compatibility boundary.

Listed on Amazon as: Dexter 12,000 lb Hydraulic Trailer Jack Add-On Kit – Single Power Jack – Selector Valve – Double Acting – for Dump, Cargo & Gooseneck Trailers

#4 · Center-Tube Mount

4. EQ Systems AJ 1/24

• Load Capacity: 8,000 lbs
• Material: steel
• Compatible with Vehicle Type: Gooseneck trailers

Best for: Gooseneck living-quarter fit.

Why it ranks #4: Designed to bolt onto a gooseneck trailer’s center tube, it provides 8,000-pound capacity, 24 inches of stroke, and a manual override screw drive.

A 24-inch stroke paired with an 8,000-pound capacity gives the EQ Systems single-leg jack useful lifting range for gooseneck trailers with living quarters up to an 11-foot short wall. Its manual override screw drive also provides an operating option alongside the hydraulic system, for buyers prioritizing a specified trailer configuration.

The square tube-in-tube steel construction supports the listed 8,000-pound capacity, while the 24-inch stroke gives the jack lifting travel for trailer setup. A single-function pump and single-switch gear control with key keep operation to one control point; the manual override screw drive adds a mechanical alternative. Universal mounting brackets are listed, and the jack is intended to bolt onto a gooseneck trailer's center tube. The stated living-quarter fit extends to an 11-foot short wall.

Skip it if you need a listed 12,000-pound single-jack capacity; the Chief 12K Hydraulic Trailer Jack offers that rating and 24 inches of travel.

Choose this EQ Systems jack for a gooseneck owner whose living quarters have a short wall up to 11 feet and who values manual override. Its 8,000-pound rating is the boundary to weigh against heavier requirements.

Listed on Amazon as: AJ 1/24 Hydraulic Trailer Jack with Manual Override Screw Drive

#5 · Articulating Foot

5. Chief 12K Hydraulic Jack

• Load Capacity: 12,000 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer

Best for: Uneven-ground gooseneck support.

Why it ranks #5: Its 12,000-pound lift and hold capacity, 24-inch travel, and 360-degree articulating foot offer useful listed features for trailer setup.

A 360-degree articulating foot lets the Chief 12K jack adjust its contact on uneven surfaces, a practical detail for gooseneck and utility trailer setups. It pairs that foot with 12,000 pounds of lift and hold capacity, 24 inches of travel, and double-acting operation for powered movement in both directions.

The articulating foot can turn through 360 degrees, giving the jack a contact feature specifically stated for uneven surfaces. Its 12,000-pound lift and hold capacity pairs with 24 inches of travel for trailer positioning, while double-acting hydraulics support powered raising and lowering. The jack is bolt-on ready, which gives installation a stated approach, and its 3,000 PSI operating-pressure rating defines a system specification. Upgraded quad seals are listed to improve holding and reduce bypass.

Skip it if you want a complete kit with a listed power unit; the Dexter 12,000 lb Hydraulic Trailer Jack Kit includes a KTI pump.

Pick the Chief for a trailer owner prioritizing an articulating foot, stated holding capacity, and bolt-on readiness on uneven terrain. The supplied listing does not specify a power unit, so that system detail matters.

Listed on Amazon as: Chief 12K Hydraulic Trailer Jack, 3000 PSI, Goose Neck Trailer, Utility Trailer Jack, Trailer Lift System, 12,000 lbs of Lift

#6

6. Primary Mover PFJ-2-ADS-K

• Load Capacity: 12000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Weld-on dual-jack lifting.

Why it ranks #6: The dual 12,000-pound jack configuration provides 24,000 pounds of stated combined lifting capability, but the listing describes a weld-on setup.

Two 12,000-pound jacks give this Primary Mover kit a stated 24,000-pound lifting capability, with a weld-on configuration for buyers planning a permanent mounting approach. Its hydraulic system replaces manual cranking with powered lifting and lowering, making the dual-jack capacity and installation style the defining fit considerations.

The 12,000-pound-by-two jack arrangement is presented as 24,000 pounds of lifting capability, giving buyers a dual-jack configuration rather than a single lifting point. The hydraulic system provides powered raising and lowering, avoiding manual cranking in the listed workflow. Its weld-on style identifies the mounting approach, and the included bracket is specified as a component. The listed 140-pound weight is also relevant when moving the kit into position for installation.

Skip it if you need a bolt-on single jack rather than a weld-on dual setup; the Primary Mover 12K Bolt On kit matches that installation style.

This Primary Mover kit suits trailer owners planning weld-on installation and seeking the stated capacity of two powered 12,000-pound jacks. Its dual layout, 140-pound listed weight, and mounting approach deserve consideration before installation.

Listed on Amazon as: Hydraulic Trailer Jack (24,000 lb) – Power Jack 12K x 2 Double Acting, Lift Trailer Jack Stand with Hydraulic Power Unit (24k Jacks Weld On) PFJ-2-ADS-K

#7

7. Primary Mover PFJ-1-MB-K

• Load Capacity: 12,000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Bolt-on single-jack installation.

Why it ranks #7: This 12,000-pound bolt-on kit offers a hydraulic power unit and a dual holding valve, though the listing does not specifically identify gooseneck compatibility.

A bolt-on 12,000-pound jack kit with a hydraulic power unit gives the Primary Mover a defined installation style for buyers who want powered trailer lifting without manual cranking. Its double-acting system and dual holding valve address both controlled movement and stability during operation, making those details central to the fit decision.

The 12,000-pound lifting capability is paired with a power unit that operates at the touch of a button, replacing manual cranking in the listed workflow. Double-acting operation supports powered movement, while the dual holding valve is specified to provide stability during use. The kit's bolt-on style and included bracket give installers a stated mounting approach; at 120 pounds, handling and positioning the assembly are practical installation considerations.

Skip it if you need a lighter listed single-jack kit; the Primary Mover 12,000 lb Jack Weld On weighs 60 pounds.

This Primary Mover suits a trailer owner seeking a 12,000-pound powered jack with bolt-on mounting and a holding valve. Account for the 120-pound listed weight when planning to position and secure the kit.

Listed on Amazon as: Hydraulic Trailer Jack (12,000 lb) – Power Jack 12K Double Acting, Lift Trailer Jack Stand with Hydraulic Power Unit (12k Jack Kit Bolt On) PFJ-1-MB-K

#8

8. Primary Mover PFJ-1-ADS-K

• Load Capacity: 12,000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Weld-on single-jack kit.

Why it ranks #8: A 12,000-pound hydraulic jack kit with a dual holding valve, listed as a weld-on style; gooseneck compatibility is not specified.

A 60-pound listed weight and weld-on mounting style distinguish this Primary Mover single-jack kit for buyers planning a welded installation. The 12,000-pound hydraulic jack adds powered lifting without manual cranking, while its dual holding valve is specified to support stability during operation and hitching.

The 12,000-pound lifting capability pairs with a hydraulic system that operates at the touch of a button, providing powered movement in place of manual cranking. A dual holding valve is listed to support stability during operation, which matters when positioning a trailer for hitching. The weld-on style gives the kit a defined mounting approach, and the 60-pound listed weight is a handling consideration during installation. A bracket is included.

Skip it if you want a bolt-on mounting approach instead of welding; the Primary Mover 12K Bolt On hydraulic jack kit is the listed alternative.

This Primary Mover suits a trailer owner who plans weld-on mounting and wants one powered 12,000-pound jack with a holding valve. Its installation style is the key boundary for buyers choosing a mounting method.

Listed on Amazon as: Hydraulic Trailer Jack (12,000 lb) – Power Jack 12K Double Acting, Lift Trailer Jack Stand Kit (12k Jack Weld On) PFJ-1-ADS-K

#9

9. Primary Mover PFJ-12K

• Load Capacity: 1.2E+4 lb
• Material: steel
• Compatible with Vehicle Type: Trailer

Best for: Weld-on powered jack.

Why it ranks #9: This 12,000-pound hydraulic jack includes a bracket, but its listed vehicle type is trailer rather than a specifically identified gooseneck.

A 12,000-pound lifting capacity paired with double-acting hydraulics gives this Primary Mover jack powered trailer movement in both directions without manual cranking. Its weld-on style identifies the mounting approach, while the dual holding valve is listed to support stability during operation, including when preparing to hitch.

The jack's stated 12,000-pound capacity and hydraulic power operation suit buyers seeking powered trailer lifting rather than manual cranking. Double-acting operation supports movement in both directions, while the dual holding valve is specified to provide stability during use. Its weld-on style sets an installation expectation, and the included bracket is listed as a component. At 60 pounds, the jack's stated weight is relevant when handling and positioning it for mounting.

Skip it if you want bolt-on installation; the Primary Mover Hydraulic Trailer Jack 12K Bolt On kit offers that mounting style.

Choose this Primary Mover for a trailer installation planned around welding and a single powered 12,000-pound jack. Its double-acting hydraulics and holding valve suit powered operation, but the mounting method is a clear fit consideration.

Listed on Amazon as: Hydraulic Trailer Jack (12,000 lb) – Power Jack 12K Double Acting, Lift Trailer Jack Stand (Bracket) (12k Weld on) PFJ-12K

#10

10. RAM PREMIUM HJ-15008

• Load Capacity: 15000 lb
• Material: steel
• Compatible with Vehicle Type: Trailer

Best for: Remote-operated high-travel jack.

Why it ranks #10: The self-contained jack offers a corded remote and 12,000-pound lift capacity, but its listing does not specifically identify gooseneck compatibility.

A 24.2-inch travel range and a 12-foot corded remote give this RAM PREMIUM jack a combination of lifting reach and control from a distance. Its self-contained hydraulic unit and 12,000-pound lift capacity suit trailer owners seeking an integrated powered jack, with a pivoting foot pad for uneven surfaces.

The jack lists 15,000 pounds of support capacity and 12,000 pounds of lift capacity, making the distinction important when matching it to a trailer task. Its 59-inch extended height, 34.8-inch retracted height, and 24.2-inch travel define the available movement. A self-contained pump with a 500-watt, 12-volt DC motor powers double-acting operation, while the 12-foot corded remote keeps the control in hand. The pivoting foot pad addresses uneven ground.

Skip it if you prefer a bolt-on kit with a listed dual holding valve; the Primary Mover 12K Jack Weld On lists that feature.

This RAM PREMIUM fits trailer owners who value a self-contained pump, substantial stated travel, and remote operation, including on uneven surfaces. The lift rating is 12,000 pounds; its corded control is a relevant operating boundary.

Listed on Amazon as: 15K Self-Contained Hydraulic Jack Heavy-Duty Includes Corded Remote & Mounting Plate, Black