Best Hollywood Ebike Rack For RV and Other RV-Ready Options

#1 · Best Overall

1. Hollywood Racks RV Rider

• Weight: 56 lb
• Load Capacity: 80 lb
• Material: Alloy Steel, Plastic
• Compatible with Vehicle Type: Bicycle, Trailer

Best for: RV riders with heavy e-bikes.

Why it ranks #1: Explicitly designed for motorhomes, fifth wheels, and flat-towed vehicles; carries two bikes up to 80 pounds each, but excludes travel trailers.

A 160-pound total capacity, with room for two bikes weighing up to 80 pounds each, makes the Hollywood Racks RV Rider suited to heavy e-bike transport. Its wheel holders take tires up to five inches wide, so it can accommodate standard and fat-tire bikes on RV motorhomes, fifth wheels, and flat-towed vehicles.

The RV-approved design is specified for motorhomes, fifth wheels, and flat-towed vehicles, addressing a key fit distinction for RV travel. A locking threaded hitch pin and included hitch tightener secure the rack at the vehicle connection, while the 80-pound-per-bike rating supports heavier e-bikes. Its five-inch tire capacity accommodates fat tires as well as standard widths. The important boundary: the supplied information says it is not approved for travel trailers.

Skip it if you need a rack specifically approved for travel trailers; the Swagman E-SPEC lists travel-trailer use with a reduced 70-pound-per-bike limit.

Choose the RV Rider if your motorhome, fifth wheel, or flat-towed setup needs room for two heavy, wide-tire bikes. It is not the pick for a travel trailer, so distinguish your towing setup before deciding.

Listed on Amazon as: Hollywood RV Rider Hitch Bike Rack for 2 E-Bikes up to 80 lbs Each

#2 · Travel Trailer Pick

2. Swagman E-SPEC

• Weight: 57 lb
• Load Capacity: 140 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Bicycle

Best for: RV travel with defined load limits.

Why it ranks #2: Lists RV-approved use including travel trailers and fifth wheels, with a stated 70-pound-per-bike limit in RV mode and 80 pounds on regular vehicles.

The Swagman E-SPEC states separate limits for ordinary vehicles and RV-approved use: 80 pounds per bike on regular vehicles and 70 pounds per bike in RV mode. That distinction helps buyers match the rack’s capacity to how they tow, rather than applying one rating to every setup.

For an RV motorhome, travel trailer, or fifth wheel, the listed RV-approved mode reduces capacity to 70 pounds per bike; on a regular vehicle, the limit is 80 pounds each. This makes bike weight and towing arrangement central to choosing the rack. The product also describes assembly in minutes using its instructions, helping buyers plan setup. Its alloy-steel construction and 140-pound listed total load capacity suit two-bike transport within the stated RV-mode limit.

Skip it if you need to carry a bike heavier than 70 pounds on a travel trailer; the Hollywood Racks RV Rider is not approved for travel trailers either.

Choose the E-SPEC if your RV setup needs a rack with an expressly stated RV mode and your bikes meet its 70-pound-per-bike limit. Regular-vehicle use has a separate 80-pound limit, so keep those ratings distinct.

Listed on Amazon as: Swagman E-SPEC RV & eBike Approved Hitch Mount Bike Rack

#3 · Fat-Tire RV Option

3. Swagman Escapee Pro

• Weight: 63 lb
• Load Capacity: 80 lbs per bike
• Material: Alloy Steel
• Compatible with Vehicle Type: Bicycle

Best for: Frame-free RV bike transport.

Why it ranks #3: Its title specifies RV approval, an 80-pound-per-bike capacity, and compatibility with step-through and fat-tire bikes up to five inches.

Zero frame contact is the Swagman Escapee Pro's defining feature, making its wheel-mount platform relevant to bikes whose frames you do not want clamped. The listed fit includes step-through and fat-tire bikes up to five inches, with an 80-pound-per-bike rating and RV-approved designation.

The wheel-mount, zero-frame-contact design avoids clamping the bike frame, a useful distinction for buyers considering step-through bikes. Its stated five-inch tire limit accommodates fat tires, while the 80-pound-per-bike rating supports heavy e-bikes. The product title identifies it as RV approved and specifies a two-inch Class 3 hitch, giving RV shoppers a receiver-class detail to check. Included assembly bolts and a threaded locking hitch pin cover basic setup and rack-to-vehicle locking needs.

Skip it if you need a stated 100-pound limit per bike; the CRAVOT CyberRack E2 lists up to 100 pounds per bike.

The Escapee Pro fits RV owners prioritizing wheel-mount, frame-free support for step-through or fat-tire bikes. Its specified two-inch Class 3 hitch and 80-pound-per-bike limit are the key fit and load boundaries to check.

Listed on Amazon as: Swagman Escapee Pro Hitch Mount E-Bike Rack – 2 Bike Wheel-Mount Platform Carrier, Zero Frame Contact, 80 lb per Bike, Fits Step-Through & Fat Tire Bikes up to 5”, RV Approved, 2” Class 3 Hitch

#4 · Highest Capacity

4. CYKE OXEN W

• Weight: 64.3 lb
• Load Capacity: 200 lb
• Material: Aluminum
• Compatible with Vehicle Type: Cars, SUVs, RVs, Trucks, Trailers with 2''…

Best for: No-lift loading for RVs.

Why it ranks #4: Offers 200 pounds total capacity, a slide-out loading ramp, and stated compatibility with RVs and trailers using a two-inch receiver.

A slide-out ramp that tucks back into the CYKE OXEN W makes roll-on loading available without finding separate ramp storage. Its 200-pound capacity carries two bikes, and its listed compatibility includes RVs with a two-inch receiver, pairing convenient loading with an RV-specific fit claim.

The ramp deploys for loading and stores within the rack afterward, reducing the need to carry or stow a separate loading aid. A 200-pound load rating supports two bikes, while the product is listed for cars, SUVs, RVs, trucks, and trailers with a two-inch receiver. The adjustable license plate holder and two reflectors are included features relevant to rear-mounted transport. At 64.3 pounds, the rack itself is a substantial item to handle during installation or storage.

Skip it if you want a lighter rack to handle; the STUDTREX TrailV2 Plus is listed at 54 pounds and includes a loading ramp.

Choose the OXEN W if you want an integrated slide-out ramp and listed RV compatibility for a two-inch receiver. Its 64.3-pound rack weight is a practical handling consideration when fitting or storing it.

Listed on Amazon as: Oxen W Hitch Ebike Rack 2-Bike, 200lbs, Slide-Out Ramp, 5" Fat Tire

#5 · Long Ramp

5. STUDTREX TrailV2 Plus

• Weight: 54 lb
• Load Capacity: 200 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car, Recreational Vehicle (RV), SUV, Trailer…

Best for: Ramp loading at higher hitches.

Why it ranks #5: Its 200-pound capacity and 46-inch ramp suit heavy bikes, and the listing names recreational vehicles and trailers among compatible vehicle types.

The STUDTREX TrailV2 Plus pairs a 46-inch ramp with a 200-pound capacity, and its ramp is eight inches longer than the previous version. That added reach is specifically intended to ease loading on vehicles with higher hitch receivers, while the included Guide Kit helps guide wider tires.

A repositionable support-block pair and two screw-mounted slopes form the included Guide Kit, helping guide wider tires and support heavier e-bikes as they roll toward the wheel trays. The 46-inch ramp is specified as useful for higher hitch receivers, so loading does not rely on lifting bikes directly onto the rack. At 54 pounds, the rack is lighter than several heavier-capacity options in this list, though it still needs handling for mounting and storage.

Skip it if you need a stated per-bike limit for two 80-pound bikes; the Hollywood Racks RV Rider specifies up to 80 pounds per bike.

The TrailV2 Plus suits buyers who want ramp-assisted loading at a higher hitch and the included tire-guiding kit. Its supplied details give a 200-pound total limit but no per-bike rating, so check that distinction against your bikes.

Listed on Amazon as: TrailV2 Plus 200 lb Hitch Mount EBike Rack with Ramp for 2 Bikes Heavy Duty

#6

6. CRAVOT CyberRack E2

• Weight: 67 lb
• Load Capacity: 200 lbs
• Material: Aluminum, Steel
• Compatible with Vehicle Type: Car, SUV, Truck, Trailers, Van

Best for: High-capacity ramp-assisted hauling.

Why it ranks #6: Provides 200 pounds total capacity and a ramp, with stated compatibility for vehicles including trailers; the supplied facts do not specifically establish RV approval.

A 200-pound total capacity and included ramp give the CRAVOT CyberRack E2 room for two heavy bikes while supporting roll-on loading. It fits vehicles with a two-inch receiver and lists up to 100 pounds per bike, with wheelbase capacity up to 50 inches for matching bikes.

The ramp offers a way to load bikes without lifting them onto the carrier, while the 200-pound total rating provides headroom for two bikes within its stated 100-pound individual limit. Compatibility specifies a two-inch receiver, tire width up to five inches, and wheelbase up to 50 inches, giving buyers concrete checks for their bikes and vehicle. A V-shaped front-wheel cradle accommodates varied tire sizes; the semi-enclosed connecting block and shock-absorbing threads support a more stable rack connection.

Skip it if you have a 1.25-inch receiver; the Hollywood Racks Trail Rider lists both 1.25-inch and 2-inch hitch compatibility for lighter bikes.

The CyberRack E2 fits buyers hauling heavy bikes who can use its two-inch receiver fit and want ramp loading. Check wheelbase and tire width against its 50-inch and five-inch limits before choosing it for your setup.

Listed on Amazon as: CyberRack EBike Rack for 2 Bike,200 lbs Capacity

#7

7. RockyMounts GigaWatt

• Weight: 64 lb
• Load Capacity: 80 per bike lb
• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: Car

Best for: Ramp loading with keyed-alike locks.

Why it ranks #7: Carries bikes up to 80 pounds each and includes a ramp and keyed-alike locks, but supplied compatibility information names cars rather than RVs.

The RockyMounts GigaWatt combines an included ramp with a keyed-alike chain lock and hitch lock, letting buyers address loading and two points of locking with supplied accessories. It carries bikes up to 80 pounds each and fits two-inch receivers, with wheel and tire ranges specified.

An included ramp supports loading heavier bikes, while the chain lock and hitch lock share a key for locking a bike to the rack and the rack to the vehicle. The front-tire-only contact avoids frame contact, which is relevant for fender-compatible bikes. Fit limits include 20- to 29-inch wheel diameters, road tires up to 4.5 inches, fat tires, and wheelbases from 34 to 55 inches. The supplied compatibility lists cars, so RV use is not established here.

Skip it if you need listed RV compatibility; the Swagman E-SPEC explicitly lists RV-approved use, with a 70-pound-per-bike RV limit.

The GigaWatt suits car owners wanting a ramp, frame-free wheel contact, and keyed-alike locks for two bikes. Its supplied compatibility names cars rather than RVs, so RV shoppers should account for that distinction.

Listed on Amazon as: RockyMounts GigaWatt 2" Hitch Rack for receivers, Includes ramp, Carries Bikes and ebikes up tp 80lbs Each

#8

8. Hollywood Racks Destination E

• Weight: 46.2 lb
• Load Capacity: 140 lb
• Material: Metal, Plastic
• Compatible with Vehicle Type: Car, Truck, SUV

Best for: Ramp-loading two-bike trips.

Why it ranks #8: Carries two bikes up to 70 pounds each and includes a 46-inch ramp, but the listed compatible vehicles are cars, trucks, and SUVs.

A 46-inch expandable aluminum ramp lets you roll bikes onto the Hollywood Racks Destination E rather than lifting them onto the carrier. It carries two electric or standard bikes up to 70 pounds each and accepts tires up to 4.5 inches wide, making loading assistance a central part of its setup.

The included ramp supports a one-person loading workflow, and its expandable format gives you a loading aid that can be used when bringing bikes aboard. A 140-pound total capacity corresponds to the stated 70-pound limit for each of two bikes. Tire clearance up to 4.5 inches covers a range of e-bike widths, while the rack is described as foldable and lockable. The supplied vehicle compatibility names cars, trucks, and SUVs, not RVs.

Skip it if you need listed RV compatibility; the CYKE OXEN W is specified for RVs and accepts a 2-inch receiver.

This Destination E suits buyers who value ramp-assisted loading for two bikes on a car, truck, or SUV. Its listed vehicle compatibility does not establish RV use, so RV shoppers should choose a model with that use expressly specified.

Listed on Amazon as: Hollywood Racks Destination E Hitch Bike Rack with Ramp for 2 Bikes

#9

9. Hollywood Racks Sport Rider

• Weight: 56 lb
• Load Capacity: 160 lb
• Material: Alloy Steel, Plastic
• Compatible with Vehicle Type: Bicycle

Best for: Heavy bikes on non-RV vehicles.

Why it ranks #9: Carries two bikes up to 80 pounds each, but its listing explicitly says not to use it on travel trailers, fifth wheels, or towed vehicles.

Locking frame clamps, a locking hitch pin, and a security cable give the Hollywood Racks Sport Rider several listed security features for transporting two bikes up to 80 pounds each. Its 160-pound capacity supports heavy e-bikes, but the supplied description explicitly rules out RVs and towed vehicles.

The locking frame hooks and security cable secure bikes at the rack, while the locking hitch pin and wobble-free hitch-tightening system address the vehicle connection. A smart tilting feature provides access to the trunk, and the rack folds for storage. It carries two bikes up to 80 pounds each, but the supplied use restrictions say not to use it on a travel trailer, fifth wheel, or towed vehicle. That makes its load rating irrelevant to RV suitability.

Skip it if you are outfitting an RV or towed vehicle; the Swagman E-SPEC is listed for RV-approved use with a reduced RV load limit.

This Sport Rider suits car, truck, or SUV owners seeking heavy-bike capacity, locking features, and tilting trunk access. Do not choose it for an RV, fifth wheel, travel trailer, or towed vehicle.

Listed on Amazon as: Hollywood Racks Sport Rider 2" Hitch Bike Rack, Carries 2 Bikes up to 80 lbs Each for Standard, Fat Tire and Electric Bicycles – Heavy Duty, Foldable Ebike Rack for Car, Truck, and SUV

#10

10. Hollywood Racks Trail Rider

• Weight: 34 lb
• Load Capacity: 45 lb
• Material: Steel
• Compatible with Vehicle Type: Bicycle, Trailer

Best for: Lighter bikes on mixed hitch sizes.

Why it ranks #10: Not designed for e-bikes and limited to 45 pounds per bike, so it does not suit the heavy e-bike focus of this search.

Compatibility with both 1.25-inch and two-inch hitches gives the Hollywood Racks Trail Rider a broader listed hitch fit than models specifying only a two-inch receiver. Its adjustable wheel holders and padded locking frame hooks support two-bike transport, but its 45-pound-per-bike limit excludes e-bikes.

Adjustable wheel holders accommodate varied bicycle styles, while padded ratchet frame hooks slide down and lock to hold bikes in place and help protect their finish. The threaded locking hitch pin adds security at the hitch, and foldable arms support storage between trips. Its capacity is limited to 45 pounds per bike, and the supplied facts explicitly say it is not designed for e-bikes. Treat it as a standard-bike option, not an RV e-bike carrier.

Skip it if you need to carry e-bikes; the Hollywood Racks RV Rider is approved for RV motorhomes, fifth wheels, and flat-towed vehicles.

The Trail Rider is for buyers transporting two lighter standard bikes who need the listed 1.25-inch or two-inch hitch options. Its 45-pound-per-bike rating and explicit e-bike exclusion make it unsuitable for heavy e-bike RV transport.

Listed on Amazon as: Hollywood Racks, Trail Rider, Hitch Mount Rack, 1-1/4'' and 2'', Bikes: 2