Best Heated Grips Motorcycle: Compare Grips, Covers, and Wraps

#1 · Best Overall

1. Oxford Heaterz Adventure

• Weight: 0.58 kg
• Material Type: Rubber, Silicone
• Compatible with Vehicle Type: bike
• Size: adventure

Best for: Adventure-bike grip durability.

Why it ranks #1: Adventure-specific rubber grips combine ergonomic tread, a controller drawing under 4A, waterproof connectors, and low-voltage shutoff at 10.5V.

A square tread pattern combines medium wear resistance with vibration absorption, making Oxford’s Heaterz Premium Adventure grips especially relevant to adventure-bike riders. Ergonomic surface shaping and thicker rubber in high-wear areas connect hand feel with durability, while the sealed controller and waterproof connectors address exposure during use.

The grips’ rhombus tread is listed for grip and feel, while thicker rubber in maximum-wear areas helps those zones withstand use. Their welded, sealed-for-life heat-controller case and waterproof connectors support weather exposure; the supplied wiring loom and plug-and-play connections simplify the battery wiring workflow. Draw is under 4A, and the controller switches off at 10.5V if left on, helping protect the battery from a forgotten shutdown. Oxford identifies this version for adventure bikes.

Skip it if you ride a different listed motorcycle category and want broad compatibility; Koso Apollo AM111030 covers several street and off-road motorcycle types.

Adventure-bike riders who want weather-protected connections, tactile tread, and a battery-voltage cutoff will find a focused feature set here. Keep its adventure-bike positioning and under-4A electrical draw in mind when choosing.

Listed on Amazon as: Oxford OF690Z Heaterz Premium Adventure Heated Handlebar Grips

#2 · Best Integrated Thumb Switch

2. Koso Apollo 7/8-inch and 1-inch

• Weight: 1.1 lb
• Material Type: Plastic, Rubber
• Compatible with Vehicle Type: off-road-motorcycles…
• Size: 7/8"/1"

Best for: On-bar heat control for mixed bikes.

Why it ranks #2: The integrated thumb switch changes heat settings without removing hands from the bars, and the set accommodates 7/8-inch and 1-inch handlebars.

An integrated thumb switch lets riders change heat settings without taking their hands off the handlebar, the defining convenience of Koso’s Apollo grips. The 7/8-inch and 1-inch sizing broadens handlebar compatibility, while the included installation parts support fitting across several listed motorcycle and scooter types.

Koso lists compatibility with off-road, street-cruiser, sport, touring motorcycles and motor scooters, and the 7/8-inch plus 1-inch sizing helps shoppers match the grip to their handlebar setup. The thumb control keeps temperature adjustment within reach while riding, avoiding the need to remove a hand from the bar. All parts necessary for installation are included, making this a more complete installation package than grips alone; the supplied facts do not specify heat levels or temperatures.

Skip it if you need a stated heat-level count or temperature range; Oxford Heaterz Premium Adventure lists its electrical draw and protective controller details.

This Apollo set suits riders who value reachable thumb-operated adjustment and need one of its listed handlebar sizes. Its broad vehicle-category listing helps narrow compatibility, but the available product details do not quantify its heat settings.

Listed on Amazon as: Koso AM111030 7/8" + 1" Apollo Heated Grips

#3 · Best Five-Level Control

3. BikeMaster Heated Grips

• Weight: 16 oz
• Material Type: Rubber
• Compatible with Vehicle Type: motorcycle
• Size: 7/8 in.

Best for: Five-level twist-throttle grip control.

Why it ranks #3: These 7/8-inch motorcycle grips offer a five-level temperature controller, open ends, and rubber described as suited to outdoor environments.

A five-level temperature controller gives BikeMaster riders precise choices for the 7/8-inch, 120mm heated grips. Their open-end design is specified for twist-throttle applications, while the selected rubber material is described as resisting outdoor environments and providing a secure, comfortable grip.

The 7/8-inch size and 120mm length give buyers two key dimensions to check against their handlebar and available grip space. BikeMaster identifies these for twist-throttle applications, so that use case should guide selection. The five-level controller offers more than a single heat setting, and the heating structure is described as delivering heat faster. Open ends preserve the grip’s specified functional design, while the outdoor-resistant rubber supports use in exposed riding conditions.

Skip it if you need grips listed for both 7/8-inch and 1-inch bars; Koso Apollo AM111030 supplies both sizing options.

These BikeMaster grips suit riders with 7/8-inch twist-throttle applications who want five heat levels and an open-end design. Check the 120mm length and handlebar size before selecting them for a particular setup.

Listed on Amazon as: BikeMaster Heated Grips 7/8 120mm Black

#4

4. Koso Apollo 7/8-inch 120mm

• Weight: 1 lb
• Material Type: Rubber
• Compatible with Vehicle Type: motorcycle
• Size: 7/8 inch

Best for: Compact thumb-controlled Apollo grips.

Why it ranks #4: This motorcycle-specific 7/8-inch, 120mm grip set has an integrated thumb switch, five-color LED indicator, and low-battery warning.

The integrated thumb switch is the key advantage of these 120mm Koso Apollo grips: riders can change temperature settings without removing a hand from the handlebar. Plug-and-play wiring connections simplify installation, while a low-battery warning and five-color LED indicator add useful power and setting feedback.

Koso lists these rubber grips for 7/8-inch motorcycle handlebars, with a 120mm length suited to buyers checking available grip space. The integrated switch keeps adjustment on the handlebar, and plug-and-play wiring shortens the installation process. A low-battery warning alerts the rider to power concerns, while the five-color LED indicator communicates settings. Together, those controls make operation more direct, though the supplied facts do not identify the actual temperature range or the meaning of each indicator color.

Skip it if you need both 7/8-inch and 1-inch sizing; Koso Apollo AM111030 lists those two handlebar sizes.

Choose this Koso set if your motorcycle uses 7/8-inch handlebars and you want thumb-operated adjustments with battery and setting feedback. Its 120mm length is another fit detail to consider before installation.

Listed on Amazon as: Koso 27-5869 Koso Apollo Heated Grips 7/8" 120Mm Long

#5 · Best KTM-Specific Set

5. KTM Heated Grip Set

• Weight: 0.26 kg
• Material Type: Rubber, Silicone
• Compatible with Vehicle Type: Street Bike

Best for: Integrated KTM dashboard operation.

Why it ranks #5: The four-step heated grip set works through the handlebar menu and dashboard, with listed fitment for several KTM 1290 models.

Dashboard control through the handlebar menu switch means this KTM grip set needs no additional switch, a particularly relevant advantage for owners of the listed 1290 models. Four temperature steps let riders adjust grip warmth through the motorcycle’s existing controls rather than adding a separate handlebar controller.

KTM lists this set for the 1290 Super Duke R 2017 and 1290 Super Adventure S 2017 in the supplied fit information. Operation through the handlebar menu switch and dashboard keeps temperature adjustment integrated with those controls, avoiding an extra switch on the bar. Four heat steps give riders adjustment choices. The rubber-and-silicone material is specified, but the product facts do not provide installation instructions or a broader compatibility list, so the named model fit is the key selection boundary.

Skip it if you do not ride a named KTM 1290 model; Koso Apollo AM111030 is listed across several motorcycle categories and sizes.

This set fits riders of the specifically listed KTM 1290 models who prefer dashboard-integrated heat control and four adjustment steps. Treat the named model fit as a firm boundary when considering it for another motorcycle.

Listed on Amazon as: KTM Heated Grip Set, 1290 Super Duke, 1290 Super Adventure R and S Models, 60712964044

#6 · Best Wrap-On Option

6. SOBMOTO Heated Grip Wraps

• Weight: 80 g
• Material Type: Kevlar fabric
• Compatible with Vehicle Type: ATV, Dirt Bike, Scooter, Snowmobiles, motorcycle
• Size: Fit 1.2inch-1.5inch grips

Best for: Fast wrap-on winter warmth.

Why it ranks #6: These 12V wraps fit over existing grips measuring 1.2 to 1.5 inches in outer diameter and provide three heat levels.

Composite-fiber heating elements can warm these SOBMOTO wraps in as little as 10 seconds, bringing rapid heat to the full palm without replacing existing grips. Three heat levels provide low, medium, and high choices, and the wrap-around construction fits over grips within the stated outer-diameter range.

The 1.2-to-1.5-inch outer-diameter fit range gives riders a specific measurement to check on existing grips before installation. Because the wraps fit over those grips, they preserve the original grip setup while adding heating; the product is listed for motorcycles, ATVs, dirt bikes, scooters, and snowmobiles. Composite-fiber elements provide the stated rapid heating, and the three-level control supports adjustment to riding conditions. The product accepts direct-battery or accessory-power connection and is described as IP67 waterproof.

Skip it if you have grips outside the 1.2-to-1.5-inch range; KEMIMOTO B0106-12801BK-CA-M lists 0.86-inch-diameter 12V applications.

Pick these wraps if you want quick palm coverage while retaining existing grips on a listed vehicle type. Measure grip outer diameter first; the stated 1.2-to-1.5-inch fit range is an important boundary.

Listed on Amazon as: 12V Heated Grip Wraps for Motorcycle/ATV/Snowmobile, Direct Battery or Acc Powered, Wrap-Around Design, 3 Heat Levels, IP67 Waterproof, Fits Over Existing Grips (Outer Diameter 1.2"–1.5")

#7

7. KEMIMOTO Heated Grip Pads

• Weight: 0.24 kg
• Material Type: Faux Leather
• Compatible with Vehicle Type: All-Terrain-Vehicles
• Size: Small

Best for: Adjustable ATV grip-pad warmth.

Why it ranks #7: The waterproof 12V pads offer five heat levels from 50°C to 85°C, with battery wiring or an SAE connection when the vehicle has one.

A palm-covering heating surface gives the KEMIMOTO pads a practical advantage: warmth reaches the hand’s palm quickly while riding. Five temperature settings span 50°C to 85°C, so riders can adjust the heat for changing cold-weather conditions rather than relying on a single fixed level.

These are heated pads rather than replacement grips, and the listed attachment options are double-sided tape and an L-bracket mirror base. That gives buyers two specified ways to secure them, while the 4.13-by-3.74-inch pad dimensions help with placement planning. They are listed for 0.86-inch-diameter 12V motorcycles and ATVs. Wiring connects red to battery positive and black to negative; a vehicle’s existing SAE plug can be used when present.

Skip it if you want replacement grips with an integrated thumb control; Koso Apollo AM111030 offers a handlebar thumb switch.

Choose these KEMIMOTO pads if you want adjustable palm warmth on a compatible 12V motorcycle or ATV and can accommodate pad mounting. Check the handlebar and power arrangement, including whether an SAE plug is available.

Listed on Amazon as: KEMIMOTO Heated Motorcycle Grip Pads, IP67 Waterproof, Universal for 12V ATV Motorcycle Hand Grip with Temperature Adjustable & Fast Heating

#8

8. OXWIND Heated Grip Cover

• Weight: 5.3 oz

Best for: Three-setting OXWIND handlebar cover.

Why it ranks #8: This 12V cover offers three temperature settings at 40°C, 50°C, and 60°C and fits handlebars from 0.86 to 0.98 inches.

Three intelligent temperature settings at 40°C, 50°C, and 60°C give this OXWIND heated cover a clearly defined adjustment range. Composite-fiber heating wire is described as warming in a few seconds, while a large heating area aims to distribute warmth across more of the hand-contact surface.

The stated 0.86-to-0.98-inch handlebar diameter range gives motorcycle and ATV owners a measurable fit check before buying. Its composite-fiber heating wire is described as fast-heating, and the large heating area is intended to provide more uniform and stable warmth. The three temperature choices provide specific levels rather than an unspecified dial range. Product details do not supply wiring instructions or installation hardware, so buyers should base their decision on the listed measurements and control features.

Skip it if you need stated installation components and wiring guidance; Oxford Heaterz Premium Adventure lists a wiring loom and waterproof plug connections.

Choose this OXWIND cover if its 0.86-to-0.98-inch fit range suits your motorcycle or ATV and you want three specified temperatures. The available details leave installation hardware and wiring workflow unspecified.

Listed on Amazon as: Motorcycle Heated Grips Cover, 12V Heated Handlebar Wraps for ATV

#9

9. OXWIND Heated Grip Cover

• Weight: 0.15 kg
• Material Type: Stainless Steel
• Compatible with Vehicle Type: ATV, Bicycle, Mountain Bike, Scooter
• Size: 5.03 in x 3.94"

Best for: Wrap-on cover for varied handlebars.

Why it ranks #9: The cover fits handlebars from 0.86 to 0.98 inches and uses composite-fiber heating wire, but its listing gives no heat-setting count.

A 98-inch overall length and specified 0.86-to-0.98-inch handlebar range make the OXWIND heated cover a fit-conscious wrap option for several vehicle types. Its composite-fiber heating wire and Kevlar wear-resistant cloth combine heat generation with a stated protective outer material.

The 5.03-by-3.94-inch cover dimensions and 0.86-to-0.98-inch handlebar diameter range give buyers concrete measurements to check before installation. OXWIND lists compatibility with ATVs, bicycles, mountain bikes, and scooters, extending its use beyond motorcycles. Composite-fiber heating wire provides the heating element, while Kevlar wear-resistant cloth addresses surface wear. Wiring connects red to positive and black to negative, so installation requires attention to battery polarity; the supplied facts do not specify temperature settings.

Skip it if you want a stated multi-level temperature control; OXWIND 12V black grip cover model 12V black grip cover lists three settings.

This OXWIND cover suits riders of listed vehicle types whose handlebars fall within its stated diameter range and who want a wear-resistant wrap. Measure the handlebar and plan for positive-and-negative wiring before choosing.

Listed on Amazon as: Heated Grips Cover for Motorcycle Handlebar Heater

#10

10. KEMIMOTO ATV Heated Grips

• Material Type: Rubber
• Compatible with Vehicle Type: ATV
• Size: Small

Best for: ATV thumb warmth and controls.

Why it ranks #10: This three-setting set adds thumb heating and a 5A fuse, but its stated vehicle compatibility is ATV rather than motorcycle.

A dedicated thumb warmer separates this KEMIMOTO ATV set from grip-only heaters, keeping the thumb in the heating plan while it presses the throttle. Three heat settings and an intelligent temperature-control chip let riders select a level, while a 5A fuse and waterproof cover add specified electrical protection.

The set includes heated grips and a thumb warmer and is listed for ATVs, making it a focused option for ATV riders rather than a broadly specified motorcycle fit. A single click switches between the three heat settings, giving the controls a simple operating workflow. The 5A fuse and waterproof cover are listed as safety features, with power cut-off in case of vehicle issues. During installation, avoid twisting the handle too much, since the heating wire can shift if over-twisted.

Skip it if you need a wrap that fits over existing grips rather than ATV replacement grips; SOBMOTO 12V Heated Grip Wraps list that wrap-around design.

ATV riders who want thumb warmth while operating the throttle and straightforward single-click heat changes are the intended audience. Handle installation carefully to avoid shifting the heating wire, and note the ATV-specific compatibility listing.

Listed on Amazon as: KEMIMOTO ATV Heated Grips with Thumb Warmer, IP67 Waterproof