Best Hand Shifter For Atv: Compare 10 ATV Shift Levers

#1 · Best Overall

1. Generic 19-Inch Bolt-On Conversion

• Dimensions: 19"L x 2"W
• Material: Alloy Steel
• Handle Material: Alloy Steel
• Handle Compatibility: Universal

Best for: Boot-friendly bolt-on conversion.

Why it ranks #1: Its clamp-around design converts an existing foot shifter, and the listing includes mounting hardware and instructions for a clear hand-shift use case.

A clamp-around, bolt-on design lets this 19-inch Generic shifter convert an existing foot lever to hand operation, including when bulky boots or partial submersion make foot shifting difficult. The package includes mounting hardware and instructions, supporting a conversion workflow without drilling.

The clamp-around attachment is intended to connect to an existing foot shift lever, while the listing describes no-drill assembly and bolt-on installation. That can simplify conversion compared with replacing a vehicle's entire shifting arrangement. Its 19-inch length provides an extended hand control, and the included hardware and instructions support setup. The seller says it attaches to virtually any foot-shifting machine, but buyers should still evaluate the clamp arrangement against their own lever and operating position.

Skip it if you need a direct replacement lever for a listed Chinese ATV; WEIYINGSI's 135 Degree Universal ATV Hand Gear Shifter is specified for several such models.

Choose this conversion if boots, water, or another obstacle makes foot shifting inconvenient and your machine has an existing foot lever to clamp around. Its approach depends on that lever and uses a bolt-on attachment.

Listed on Amazon as: ATV Hand Shifter Universal 19" Bolt On Converts Foot to Hand Shift Conversion Converter Lever with Mounting Hardware and Instructions

#2 · Longest Universal Lever

2. Orange Cycle Parts 22-Inch Lever

• Dimensions: 22"L x 22"W
• Material: Alloy Steel
• Handle Material: Alloy Steel
• Handle Compatibility: Universal

Best for: Universal foot-shifter mounting.

Why it ranks #2: The 22-inch lever mounts to most ATV foot shift levers, offering broad stated compatibility; the listing notes an exception for Yamaha Big Bear.

A 22-inch hand lever that mounts to most ATV foot shift levers gives the Orange Cycle Parts OCP-4620 broad conversion appeal. Its universal compatibility listing and included knob make it a practical candidate for riders who want to shift by hand without choosing a model-specific lever.

The lever's 22-inch length provides an extended hand-shift control, while its mounting approach attaches to most ATV foot shift levers. That combination suits riders converting an existing foot-shift setup rather than replacing it with a model-specific control. The included knob is a useful part of the lever assembly, and the seller describes sturdy construction with a unique knob-to-steel-rod fastening method. Fit is not universal in every case: the listing specifically identifies the Yamaha Big Bear as a model its standard shifter does not fit.

Skip it if you ride a Yamaha Big Bear; the 19.5-inch AUTOVIC lever is listed for Honda and Yamaha ATVs, unlike this model's stated exclusion.

Pick the OCP-4620 if you want a long hand lever that attaches to most existing ATV foot shifters. It is not suitable for the Yamaha Big Bear according to the seller, so that model is a clear boundary.

Listed on Amazon as: ATV 4-Wheeler Quad Universal Hand Shifter Black 22" Shift Lever 4620

#3 · Honda Yamaha Fit

3. AUTOVIC 19.5-Inch Lever

• Dimensions: 19.5"L x 2"W
• Material: Alloy Steel
• Handle Material: Alloy Steel
• Handle Compatibility: Brand Specific, Model Specific

Best for: Extended Honda and Yamaha reach.

Why it ranks #3: Its 19.5-inch extended steel lever is listed for Honda and Yamaha ATVs and references replacement OEM numbers 072000 and 072627.

At 19.5 inches, the AUTOVIC lever is notably extended, a length intended to support a more natural arm position and reduce fatigue on long rides. Its stated Honda and Yamaha ATV fitment and replacement OEM numbers make it a targeted option for riders seeking greater reach.

The 19.5-inch lever is the central ergonomic feature: AUTOVIC says its added length can make operation easier and reduce arm fatigue on longer rides. High-strength, heat-treated steel is specified to resist bending or stripping under pressure, supporting a durable shifting component. Fitment is stated for Honda and Yamaha ATVs, with replacement numbers 072000 and 072627. Verify that this model and replacement-number match your ATV before selecting it; its listed fit is not universal.

Skip it if you need a universal lever for varied ATV models; Orange Cycle Parts OCP-4620 is listed as universal and mounts to most ATV foot shifters.

This is a sensible match for Honda or Yamaha ATV owners who want an extended lever for longer rides and value the specified steel construction. Its stated fitment is brand-specific, so it is not the choice for a universal conversion.

Listed on Amazon as: 19.5 in Gear Shifter Lever for Honda & Yamaha ATV

#4 · Chinese ATV Fit

4. WEIYINGSI 135-Degree Lever

• Dimensions: 13"L x 4"W
• Material: Alloy Steel
• Handle Material: Alloy Steel
• Handle Compatibility: Brand Specific, Model Specific

Best for: Chinese ATV conversion pick.

Why it ranks #4: The 135-degree hand-operated lever is listed for Taotao, Sunl, and Coolster 50cc–125cc quads, with a comfortable anti-slip handle shape.

A 135-degree hand-operated lever gives this WEIYINGSI shifter its clearest advantage: it replaces a heavy-duty manual foot shifter with hand control. Its listed fit covers Taotao, Sunl, and Coolster Chinese ATVs from 50cc through 125cc, making it a focused option for those machines.

The 135-degree shape and dented, anti-slip ergonomic handle support a hand-operated shifting position while providing a more secure-feeling grip. The alloy-steel lever measures 13 inches long, so buyers can assess its reach against their existing setup. Listed compatibility spans several Chinese ATV makes and engine sizes, but the seller also advises checking the mounting-hole size for other models. That makes it a more specific choice than a truly universal clamp-on conversion.

Skip it if you need a clamp-on universal conversion; the Generic 19-inch ATV Hand Shifter includes mounting hardware for attaching to an existing foot lever.

Choose this lever if you ride a listed Taotao, Sunl, or Coolster 50cc–125cc ATV and want hand shifting with a shaped grip. Check the mounting-hole dimensions before using it on other machines.

Listed on Amazon as: 135 Degree Universal ATV Hand Gear Shifter Shift Lever – Black – 1 PACK

#5 · 11mm Shaft

5. PRO BAT 135-Degree Lever

• Dimensions: 15.8"L x 0.32"W
• Material: Alloy Steel
• Handle Material: Aluminum
• Handle Compatibility: Brand Specific, Model Specific

Best for: 11mm-shaft Chinese ATV fit.

Why it ranks #5: This 15.7-inch 135-degree lever lists an approximately 11mm shaft and fit for 50cc–125cc ATVs, useful when those dimensions match.

An approximately 11mm gear-lever shaft and 135-degree angle define this PRO BAT shifter for buyers comparing replacement dimensions. The listing names 50cc–125cc ATV applications, including Sunl and Taotao models, while its roughly 15.7-inch length provides a substantial hand-operated lever.

The stated 11mm shaft diameter gives buyers a specific dimension to compare with their existing setup, and the 135-degree shape identifies the lever's orientation. At about 15.7 inches long, it offers an extended hand control for the listed 50cc–125cc ATVs and four-wheelers. Alloy steel and an aluminum handle are specified, providing distinct material details for the lever and grip. The seller advises checking the pictures and specifications for compatibility, making dimensional matching important before installation.

Skip it if you need a 19-inch clamp-around conversion with installation hardware; Generic's ATV Hand Shifter is listed for bolt-on attachment to an existing foot lever.

This PRO BAT lever suits riders matching an approximately 11mm shaft and seeking a 135-degree control for the listed small ATVs. Check the dimensions and compatibility details carefully; its fit depends on the mounting setup.

Listed on Amazon as: 135° Motorcycle Hand Control Gear Shift Lever Shifter 11mm

#6

6. Generic 16-Inch Hand Shifter

• Dimensions: 16.93"L x 2.36"W
• Material: Metal
• Handle Material: Metal
• Handle Compatibility: Universal

Best for: 135-degree small-ATV replacement.

Why it ranks #6: The 410mm, approximately 16-inch lever is described as a 135-degree replacement for 50cc–150cc ATVs, though mounting dimensions are not specified.

A 135-degree angle paired with a stated 410mm, or 16-inch, length gives this Generic shifter a clear profile for small-ATV replacement. Its listed application spans 50cc, 70cc, 90cc, 110cc, 125cc, and 150cc machines, offering a more explicit range than a generic universal claim alone.

The 135-degree shape and 16-inch length help define the control's orientation and reach for a replacement decision. The listing names 50cc through 150cc ATV applications, including quad and dirt-bike use, giving buyers a concrete displacement range to compare with their machine. Metal construction is described as wear- and heat-resistant, supporting use as a replacement for a worn gear lever. The supplied specifications identify universal compatibility, but the listed range and mounting setup should guide fit decisions.

Skip it if you need a listed fit beyond 150cc; PRO BAT's 135° Motorcycle Hand Control Gear Shift Lever includes additional verified applications through 250cc.

Choose this Generic lever if your ATV falls within its stated 50cc–150cc range and the 135-degree, 16-inch format suits your setup. Riders with larger listed applications should look for a lever covering those displacements.

Listed on Amazon as: ATV Hand Shifter Control,Universal ATV Hand Gear Shifter,Gear Shift Lever 410mm/16in Long Black for Quad Dirt Bike

#7

7. aqxreight 16-Inch Metal Lever

• Dimensions: 16.93"L x 2.36"W
• Material: Metal
• Handle Material: Metal
• Handle Compatibility: Universal

Best for: Compact universal metal lever.

Why it ranks #7: Its 410mm metal lever is described as universal and intended for replacing a worn ATV gear lever, but the listing gives limited fitment detail.

A 410mm, or 16-inch, metal lever gives this aqxreight shifter a defined size for replacement planning, while its compatibility is listed as universal. It is presented for repairing or replacing a worn gear lever, with a small form factor also described as easy to carry and store.

The 410mm/16-inch length helps buyers judge whether this lever's reach suits their riding position and storage needs. Its metal handle and universal compatibility listing frame it as a general replacement option rather than one tied to named ATV makes. aqxreight describes it as suitable for repairing or replacing a worn gear lever and cites quality control, but the supplied details do not specify an engine-size range. Check the mounting arrangement against your vehicle before treating the universal label as a fit guarantee.

Skip it if you need a stated 50cc–150cc application range; Generic's ATV Hand Shifter Control lists those displacement classes for its 135-degree lever.

This aqxreight option fits buyers seeking a 16-inch metal replacement and a universal compatibility listing. It may suit a worn-lever repair, but shoppers needing a specified displacement range should favor a listing that names one.

Listed on Amazon as: aqxreight ATV Hand Control Gear Shift Lever – High Strength Metal, 410mm/16in Long – Replacement for Quad Dirt Bike – Wide Application

#8

8. AMONIDA 16-Inch Metal Lever

• Material: Metal
• Handle Material: Metal

Best for: Portable metal replacement lever.

Why it ranks #8: This 16-inch metal 135-degree lever is presented as an ATV replacement, but the available specifications do not give a mounting size or model range.

A compact, 16-inch metal hand shifter gives AMONIDA's ATV lever a portable replacement profile for riders addressing a worn gear lever. Its 135-degree design and stated heat-resistant metal construction make it a straightforward option for buyers seeking a hand control rather than a foot-shifter conversion assembly.

The 135-degree shift lever is described as a replacement for ATV use, while the metal construction is presented as heat-resistant and long-lasting. The product is also described as small, easy to carry and store, and convenient to use, which may help buyers keeping a replacement part on hand. Its listed function is repairing or replacing a worn gear lever. The supplied details do not state a specific displacement range or lever length, so match the existing mounting arrangement carefully.

Skip it if you want a specified 16-inch lever and 50cc–150cc fit range; Generic's ATV Hand Shifter Control states both dimensions and displacement coverage.

AMONIDA suits buyers wanting a portable metal replacement for an ATV's worn hand-shift lever. Because the supplied details do not give a length or displacement range, prioritize it only when the mounting and vehicle fit are already established.

Listed on Amazon as: AMONIDA ATV Hand Shifter, 16in Metal Black ATV Hand Control Gear Shift Lever, for Quad Dirt Bike

#9

9. aqxreight Nylon-Grip Lever

• Dimensions: 12.2"L x 3.15"W
• Material: Nylon
• Handle Material: Alloy Steel, Nylon

Best for: 13mm-aperture multi-vehicle lever.

Why it ranks #9: The 12.2-inch lever lists a 13mm aperture and fit for several small ATV sizes, but that specific mounting measurement limits universal use.

A specified 13mm aperture gives this aqxreight lever a concrete fit-check dimension for ATV, motorcycle, and kart buyers. Its alloy-and-nylon construction and ergonomic grip position it as a replacement option for riders who want a hand-operated control across several small-vehicle categories.

The 13mm aperture is useful when comparing the lever with an existing mounting point, while the listed applications include ATV, motorcycle, and kart use. Alloy steel and nylon form the stated material combination, with an antirust surface described in the product details. The ergonomic grip is intended to make operation comfortable, and the listing says it can be installed in a specific position without modification. Confirming the aperture remains important because the applications cover multiple vehicle types and engine sizes.

Skip it if you need a long, universal clamp-on conversion with hardware; Generic's 19-inch ATV Hand Shifter includes mounting hardware and instructions.

Consider this aqxreight lever if its 13mm aperture matches your ATV, motorcycle, or kart and you want an ergonomic hand control. Its stated dimension is the key fit boundary, so compare it with your mounting point.

Listed on Amazon as: aqxreight Hand Gear Shifter Stick Lever Nylon Automotive Manual Gear Shifter Shift Knob Stick Handle Lever Fit for 110 125 150 to 250 ATV Quad Go Kart

#10

10. MCHMFG Folding Gear Lever

• Dimensions: 6.1"L x 2.1"W
• Material: Aluminum
• Handle Material: Aluminum

Best for: Compact folding pit-bike lever.

Why it ranks #10: Its 6.1-inch aluminum folding lever lists an 11mm installation hole and pit-bike fitment, but it is not clearly presented as a hand-shifter conversion.

A folding aluminum-alloy lever measuring 6.1 inches long distinguishes this MCHMFG shifter from the roundup's extended hand-control options. Its 11mm installation-hole size and listed fitment for XR50, XR80, CRF50, CRF70, and 50cc–125cc pit bikes help buyers assess this compact replacement.

The 6.1-inch length and folding construction suit buyers looking for a compact gear lever rather than a long hand-shift conversion bar. Aluminum alloy keeps the specified material clear, while the 11mm installation-hole size gives a direct dimension for checking the mounting point. The listing names XR50, XR80, CRF50, CRF70, and 50cc–125cc pit-bike applications. That fit information makes it a focused option for those smaller machines, not a broadly specified ATV hand-control conversion.

Skip it if you want a long hand-control conversion; Orange Cycle Parts OCP-4620 is a 22-inch hand lever that mounts to most ATV foot shifters.

This MCHMFG lever is for buyers seeking a compact folding replacement for the listed pit-bike models and matching an 11mm hole. Its 6.1-inch length makes it a different fit from long ATV hand-shifter conversions.

Listed on Amazon as: MCHMFGMotorcycle Hand Gear Lever Shifter Handle for 110cc 125cc 135cc 150cc 200cc 250cc Quad Dirt Bike ATV Buggy Black