Best Generator Holder For Trailer: Compare A-Frame and Bumper Racks

Best Generator Holder For Trailer

A strong generator holder for a trailer should match your mounting point, support the load you plan to carry, and leave the generator secure without interfering with trailer equipment. For many RV owners, an A-frame tray is the most directly relevant format: the Stromberg Carlson CC-255 mounts to the A-frame and lists a 300-pound capacity. This roundup compares eight options, including adjustable tongue trays and bumper-mounted cargo carriers, so you can distinguish purpose-built trailer storage from general cargo racks.

Listed capacities range from 200 to 750 pounds where provided, but those figures are not interchangeable: mounting location and trailer compatibility matter just as much. Check your frame or bumper dimensions, tongue-jack clearance, and the loaded trailer’s limits before choosing a holder.

The Stromberg Carlson CC-255 is the strongest all-around match because it is an A-frame-mounted trailer tray explicitly presented for generator storage and lists a 300-pound capacity. Its 35.98-by-24.02-inch dimensions provide a defined platform, and its location is intended to put gear over the trailer’s softer-riding area. If you need adjustability, consider the KUQAE Trailer Tray; if your trailer calls for bumper mounting, compare the Nilight or Kojem carriers, while verifying fit and load limits first.

Our Top Picks

Stromberg Carlson CC-255Best Overall

Stromberg Carlson CC-255

A-frame mounting directly suits trailer generator storage, and the tray lists a 300-pound capacity with dimensions of 35.98 by 24.02 inches.

View on Amazon
Stromberg Carlson Trailer TrayA-Frame Alternative

Stromberg Carlson Trailer Tray

This 36-by-24-inch tray is described as adjustable for most A-frame trailers, making its stated trailer-tongue purpose a strong match.

View on Amazon
KUQAE Trailer TrayAdjustable Tray

KUQAE Trailer Tray

Its adjustable height and width and listed generator-storage use suit varied equipment, though the supplied specifications give no load capacity.

View on Amazon

Compare Trailer Generator Holder Options

#ProductWeightBuy
162 lbView on Amazon
268 lbView on Amazon
3
KUQAE Trailer Tray3. KUQAE Trailer TrayAdjustable Tray
40 lbView on Amazon
4
LWHwareHT Trailer Tray4. LWHwareHT Trailer TrayTongue-Fit Adjustability
—View on Amazon
5
Emeroll Generator Rack5. Emeroll Generator RackAdjustable generator rack
49 lbView on Amazon
6
Nilight Bumper Cargo Rack6. Nilight Bumper Cargo RackHighest Bumper Capacity
9.32 kgView on Amazon
7
Kojem Bumper Carrier7. Kojem Bumper CarrierBumper-mounted gear carriers
—View on Amazon
8
Mockins Hitch Tray8. Mockins Hitch TrayHigh-capacity hitch hauling
57 lbView on Amazon

Detailed Reviews: Best Generator Holder For Trailer

Stromberg Carlson CC-255

#1 · Best Overall

1. Stromberg Carlson CC-255

  • Weight: 62 lb

Best for: A-frame gear haulers.

Why it ranks #1: A-frame mounting directly suits trailer generator storage, and the tray lists a 300-pound capacity with dimensions of 35.98 by 24.02 inches.

A 300-pound capacity on an A-frame-mounted tray lets RVers carry a generator alongside other bulky travel gear while keeping it over the trailer’s softest-riding area. The Stromberg Carlson CC-255 also serves as a carrier for coolers, bikes, or tools, making it a flexible way to add storage at the trailer tongue.

The 35.98-by-24.02-inch platform provides room for bulky equipment, while its A-frame attachment puts that load over the area identified as the trailer’s softest ride. That placement and the 300-pound capacity make it useful for carrying a generator or combining it with other gear. At 62 pounds, the tray itself is a substantial component to handle during installation, so plan for that when setting it up or removing it for storage.

Pros
  • A-frame mounting uses trailer-tongue space
  • Supports up to 300 pounds
  • 35.98-by-24.02-inch platform accommodates bulky gear
  • Can carry generators, coolers, bikes, or tools
Cons
  • The 62-pound tray is substantial to handle during installation or removal.

Skip it if you need adjustable tray dimensions; the KUQAE trailer tray lists adjustable height and width for changing gear sizes.

The CC-255 suits RVers who want a substantial A-frame carrier for a generator and other travel gear. Its 300-pound limit is useful for bulky loads, but account for the 62-pound tray when planning installation and storage.

Full product details
BrandStromberg Carlson
Item Weight‎62 pounds
Item model number‎CC-255
Manufacturer‎Stromberg Carlson Products Inc.
Part Number‎CC-255
Model‎CC-255
Dimensions‎35.98 x 24.02 x 5 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: Stromberg Carlson CC-255 Trailer Tray – A-Frame Mounted Tray, RV Generator Mount, Trailer Cargo Carrier, Travel Storage Solutions, Front Mount Cargo Carrier & Rack – Black

View on Amazon
Stromberg Carlson Trailer Tray

#2 · A-Frame Alternative

2. Stromberg Carlson Trailer Tray

  • Weight: 68 lb

Best for: Adjustable A-frame carriers.

Why it ranks #2: This 36-by-24-inch tray is described as adjustable for most A-frame trailers, making its stated trailer-tongue purpose a strong match.

An adjustable fit for most A-frame trailers makes the Stromberg Carlson CC255 a flexible tongue-storage choice for RV owners with varied trailer setups. Its 36-by-24-inch tray offers a defined platform for cargo, while the listing advises checking vehicle compatibility before purchase, an important step for buyers whose exact trailer fit matters.

The adjustable design is described as fitting most A-frame trailers, which can accommodate different tongue configurations without committing to a single stated trailer make. Its 36-by-24-inch dimensions provide a broad cargo surface, and the 68-pound weight is relevant when planning installation or removing the tray between trips. The listing also specifically recommends contacting the seller with vehicle details for fitment compatibility, so confirming the trailer match is part of the buying workflow.

Pros
  • Adjustable to fit most A-frame trailers
  • 36-by-24-inch tray dimensions
  • Compatible with multiple makes and models, subject to fitment
  • Can serve as trailer-tongue cargo storage
Cons
  • The 68-pound tray is heavy to handle for installation or removal.

Skip it if you want a stated 300-pound capacity; the Stromberg Carlson CC-255 lists that payload figure.

The CC255 suits owners seeking adjustable A-frame cargo storage and a 36-by-24-inch tray. It is worth considering when your trailer matches, but the listing’s fitment advice makes vehicle-specific compatibility a key boundary.

Full product details
BrandStromberg Carlson
ColorRed and Black
Item Weight68 pounds
ManufacturerSTROMBER
ModelCC255

Listed on Amazon as: STROMBER Trailer Tray

View on Amazon
KUQAE Trailer Tray

#3 · Adjustable Tray

3. KUQAE Trailer Tray

  • Weight: 40 lb

Best for: Adjustable A-frame storage.

Why it ranks #3: Its adjustable height and width and listed generator-storage use suit varied equipment, though the supplied specifications give no load capacity.

Adjustable height and width let the KUQAE trailer tray reconfigure around gear of different sizes, helping RV owners organize a generator, cooler, bike, or spare tire on an A-frame storage platform. That flexibility is the key draw for buyers whose cargo mix changes between trips or who need the tray layout to suit particular equipment.

The adjustable height and width allow the storage layout to change for different-sized items, which can make loading a mixed set of camping gear more practical. The listed uses include generators, bikes, coolers, spare tires, tools, and outdoor equipment, so the tray can serve more than one trip’s cargo needs. At 40 pounds, it is a piece of equipment to account for when handling or repositioning the tray; its stated mounting style is A-frame.

Pros
  • Height and width adjust to fit different gear sizes
  • A-frame mounted storage
  • Listed for generators, bikes, coolers, and spare tires
  • 40-pound item weight
Cons
  • At 40 pounds, handling the tray during installation or repositioning takes effort.

Skip it if you need a stated load rating; the Stromberg Carlson CC-255 specifies capacity up to 300 pounds.

The KUQAE fits RV owners who value changing tray dimensions for varied camping cargo, including generators and coolers. Choose it for layout flexibility, but note that the supplied information gives no numeric payload capacity to plan against.

Full product details
BrandKUQAE
ColorBlack
Included ComponentsTrailer Tray * 1
Item Weight40 pounds
ManufacturerKUQAE
Manufacturer Warranty Description1 year manufacturer.
Model NumberYJ-FCQZTP-1B
Recommended UsesGenerator Storage, Camping Gear Storage, Bike Storage, Cooler Storage, Spare Tire Storage, Tool Storage, Outdoor Equipment Storage
Special FeatureAdjustable
StyleOutdoor storage
Style NameOutdoor storage

Listed on Amazon as: Trailer Tray Compatible with Outdoor Storage for RVs,A-Frame Mounted Tray

View on Amazon
LWHwareHT Trailer Tray

#4 · Tongue-Fit Adjustability

4. LWHwareHT Trailer Tray

Best for: Adjustable trailer-tongue racks.

Why it ranks #4: Three adjustable brackets accommodate different trailer tongues, and the listing specifically identifies generators among the gear carried.

Three adjustable brackets let the LWHwareHT trailer tray adapt to different A-frame tongue sizes and turning radii, enabling a more tailored fit across many RV trailers. The listing also notes compatibility with a trailer tongue jack and identifies generators, coolers, and compressors as cargo, making it a focused option for tongue-space storage.

The three-bracket adjustment is intended to account for trailer-tongue size and turning radius, which helps buyers configure the rack around their A-frame setup. The stated tongue-jack compatibility is useful when assessing how the rack fits into that area. Its listed cargo examples—generators, coolers, and compressors—show the intended storage role, though the supplied product details do not provide a load-capacity figure for payload planning.

Pros
  • Three adjustable brackets accommodate different tongue sizes
  • Adjustment accounts for turning radius
  • Listed as compatible with trailer tongue jacks
  • Named for generator, cooler, and compressor storage
Cons
  • The supplied details give no numeric load capacity for payload planning.

Skip it if you require a stated payload rating; the Stromberg Carlson CC-255 specifies capacity up to 300 pounds.

This LWHwareHT rack suits RV owners who want adjustable A-frame tongue storage and need to account for turning radius or a tongue jack. The lack of a supplied capacity figure is an important boundary for heavier generator loads.

Full product details
BrandLWHwareHT
ColorBlack
Included Components1
ManufacturerLWHwareHT
Part Number639394584263
Model NumberOEM

Listed on Amazon as: Portable Trailer Tray RV Generator Rack Trailer Tongue Cargo Storage Rack Steel, Black

View on Amazon
Emeroll Generator Rack

#5

5. Emeroll Generator Rack

  • Weight: 49 lb

Best for: Adjustable generator rack.

Why it ranks #5: The product is explicitly described as an RV generator rack and adjustable cargo carrier, but the supplied data does not clarify its 60LBS wording.

The Emeroll listing identifies this as an adjustable cargo carrier and RV generator rack, giving buyers a named storage option for outdoor and generator use. Its title includes “60LBS,” while the product weighs 49 pounds and has package dimensions of 44 by 22 by 4 inches, useful details for handling and storage planning.

The adjustable-carrier description indicates a rack intended for outdoor and generator storage, so it speaks directly to buyers looking for a dedicated place for that equipment. The listed 49-pound item weight is relevant when planning installation or moving the rack, and the 44-by-22-by-4-inch package dimensions help estimate space needed before setup. The title includes “60LBS,” but the supplied details do not clarify what that figure measures, so treat it cautiously when planning a load.

Pros
  • Identified as an adjustable cargo carrier
  • Described as an RV generator rack
  • Listed for outdoor and generator storage
  • 49-pound item weight and package dimensions supplied
Cons
  • The meaning of “60LBS” in the title is not clarified in the supplied product details.

Skip it if you need a clearly stated payload capacity; the Stromberg Carlson CC-255 lists a 300-pound capacity.

The Emeroll is aimed at RV owners seeking an adjustable rack specifically described for generator and outdoor storage. Its 49-pound weight matters for handling, while the ambiguous “60LBS” title figure limits payload planning from the supplied information.

Full product details
BrandEmeroll
Item Weight‎49 pounds
Manufacturer‎Emeroll
Part Number‎TCTP-C
Package Dimensions‎44 x 22 x 4 inches

Listed on Amazon as: Adjustable Cargo Carrier,RV Generator Rack Perfect Outdoor and Generator Storage 60LBS

View on Amazon
Nilight Bumper Cargo Rack

#6 · Highest Bumper Capacity

6. Nilight Bumper Cargo Rack

  • Weight: 9.32 kg

Best for: Bumper cargo with net restraint.

Why it ranks #6: This bumper-mounted rack lists a 350-pound capacity and includes mounting hardware and a cargo net, but it is not A-frame mounted.

A 350-pound capacity and included cargo net give the Nilight bumper rack a defined way to carry and restrain gear behind an RV. Its 32-by-26-inch basket fits listed 4- or 4.5-inch bumpers, and the included mounting hardware supports assembly without requiring buyers to source that hardware separately.

The 32-by-26-by-4-inch basket provides a bounded cargo area, while the 350-pound rating sets a clear payload limit for travel gear. The included net can be used to secure cargo, and the mounting hardware and manual support the installation workflow. Compatibility is specified for 4-inch or 4.5-inch bumpers, so measuring the RV bumper against those sizes is central to deciding whether this rear-mounted rack fits.

Pros
  • 350-pound listed capacity
  • 32-by-26-by-4-inch basket dimensions
  • Includes cargo net and mounting hardware
  • Fits listed 4-inch or 4.5-inch RV bumpers
Cons
  • The listed bumper fit is limited to 4-inch or 4.5-inch sizes.

Skip it if you need a wider bumper-size range; the Kojem carrier lists 5.3- and 6.0-inch bumper options too.

The Nilight suits RV travelers seeking a rear bumper basket with a net for securing cargo and a 350-pound rating. Its 32-by-26-inch footprint is useful, but the bumper must match one of the two listed sizes.

Full product details
BrandNilight
Color32”×26”×4” RV Bumper Mounted w/Net
Compatible with Vehicle TypeRV
Included Components32”×26”×4”Cargo Carrier, 31.5”×26”Cargo Net, a Set of Mounting Hardware, a User Manual
Item Dimensions32 x 26 x 4 inches
Item Weight9.32 kg
Dimensions32 x 26 x 4 inches
Load Capacity350 pound
ManufacturerNilight
Part Number92247B
Manufacturer Warranty Description2 Years Warranty
MaterialAlloy Steel
Model Number92247B

Listed on Amazon as: Nilight 32”×26”×4” RV Bumper Mounted Cargo Rack Carrier with Net Fits 4-inch or 4-1/2-inch Bumpers Heavy Duty Luggage Holder Basket for RV Camping Traveling Capacity 350LBS

View on Amazon
Kojem Bumper Carrier

#7

7. Kojem Bumper Carrier

Best for: Bumper-mounted gear carriers.

Why it ranks #7: The steel bumper carrier lists a 200-pound capacity and fits several bumper sizes, but its general cargo focus is less specific to generators.

A 200-pound load rating and bumper-mount format let the Kojem carrier add storage behind a camper or trailer without using its A-frame. Its steel construction, 15-pound assembly weight, and dozens of tie-down points suit buyers who want a manageable rack for luggage, outdoor equipment, or tools on compatible bumpers.

The carrier is listed for bumpers measuring 4.0, 4.5, 5.3, 6.0 inches and more, giving buyers several stated bumper sizes to check against their RV. Its 200-pound capacity supports gear such as luggage, tools, and outdoor equipment, while dozens of tie-down points provide multiple places to secure cargo. The assembly weighs 15 pounds and comes with mounting hardware, details that help with handling and setup planning.

Pros
  • Bumper-mounted for campers, trailers, and RVs
  • 200-pound load capacity
  • Steel construction
  • Dozens of tie-down points and mounting hardware included
Cons
  • Fit depends on having a bumper within the listed compatible size range.

Skip it if you need an A-frame tray; the Stromberg Carlson CC-255 mounts to the trailer A-frame instead.

The Kojem is for RV owners who prefer rear bumper storage for luggage, tools, or outdoor gear. Its 200-pound rating and tie-down points help with cargo management, but first match the bumper to the listed compatible sizes.

Full product details
BrandKojem
ColorBlack
Compatible with Vehicle TypeTrailer
Included Components1 X RV Cargo Carrier (black) with all necessary mounting hardware
Load Capacity2E+2 pounds
ManufacturerFAMETRADE LLC
Part NumberLYAM-X1048-1-Z1
MaterialSteel
Model NumberLYAM-X1048-1-Z1

Listed on Amazon as: RV Bumper-Mounted Generator Cargo Carrier for Campers Trailers RV

View on Amazon
Mockins Hitch Tray

#8

8. Mockins Hitch Tray

  • Weight: 57 lb

Best for: High-capacity hitch hauling.

Why it ranks #8: Its 750-pound rating is the highest listed, but the specified compatible vehicles are cars, trucks, and vans rather than trailers.

A 750-pound capacity across a 60-by-19.3-inch folding hitch tray gives the Mockins carrier room for heavy, bulky cargo while freeing interior vehicle space. Its hitch lock, stabilizer, reflectors, and ratchet straps come in the package, making this a gear-hauling option for car, truck, or van owners who need a hitch-mounted platform.

The 60-by-19.3-inch platform and 750-pound capacity support larger loads, while the folding format offers a way to stow the carrier when it is not hauling cargo. Stainless steel and heavy-duty vinyl are listed materials, with rust and corrosion resistance described for the rack. A hitch lock, stabilizer, reflector set, and two ratchet straps are included, adding useful components for mounting and securing cargo during travel.

Pros
  • 750-pound listed capacity
  • 60-by-19.3-inch platform
  • Folding hitch carrier
  • Includes hitch lock, stabilizer, reflectors, and two ratchet straps
Cons
  • It is a hitch-mounted carrier rather than an A-frame or bumper-mounted tray.

Skip it if you need A-frame tongue storage; the Stromberg Carlson CC-255 mounts directly to an RV trailer’s A-frame.

The Mockins suits car, truck, or van owners seeking a large hitch carrier for bulky cargo and a folding stowage option. Its hitch format is the key fit consideration for trailer owners looking specifically for tongue-mounted generator storage.

Full product details
BrandMockins
ColorBlack
Compatible with Vehicle TypeCar, Truck, Van
Included Components1 x Folding Hitch Cargo Carrier, 1 x Hitch Lock, 1 x Hitch Stabilizer, 1 x Reflector Set, 2 x Ratchet Straps
Item Dimensions60 x 19.3 x 2.5 inches
Item Weight57 pounds
Dimensions60 x 19.3 x 2.5 inches
Load Capacity750 Pounds
ManufacturerMockins
Part NumberMA-HC-60X20X2.5-156
Manufacturer Warranty Description5 Year Limited Warranty
MaterialHeavy Duty Vinyl, Stainless Steel
Model NumberMA-HC-60X20X2.5-156

Listed on Amazon as: Mockins 60"x19.3"x2.5" Heavy Duty Trailer Hitch Tray with 750 Lbs Capacity

View on Amazon

Avoid tongue-jack and turning-clearance conflicts

A tray can fit the A-frame yet still interfere with the tongue jack or turning clearance, so check the complete installation area before buying. The LWHwareHT Trailer Tray says its three brackets adjust to the tongue size and turning radius and notes compatibility with a trailer tongue jack; that language is a useful design clue, not proof of fit on your particular trailer. The Stromberg Carlson CC-255 lists a platform size of 35.98 by 24.02 inches, while the other Stromberg Carlson Trailer Tray lists 36 by 24 inches.

Compare those footprints with the jack, propane equipment, coupler, and the space needed for the tow vehicle to turn. Also confirm the rack’s mounting instructions and hardware suit your frame.

Product descriptions do not establish clearance for every trailer, so measure your own setup rather than relying on broad claims such as fitting most A-frames.

Treat carrier capacity as a mounting-system limit

A carrier’s stated capacity does not establish that your trailer’s frame or bumper can safely support that load. The Stromberg Carlson CC-255 lists 300 pounds, the Nilight Bumper Cargo Rack lists 350 pounds, and the Kojem Bumper Carrier lists 200 pounds; these numbers describe different products and mounting arrangements, not a like-for-like trailer rating. Generator, fuel, rack, and any other cargo all contribute to the load on the mounting point.

Bumper carriers deserve particular scrutiny: the Nilight is specified for 4- or 4.5-inch bumpers, while the Kojem description mentions several bumper sizes. Match your actual bumper dimensions and verify its allowable load with the trailer manufacturer.

For an A-frame tray, check the trailer’s tongue-load guidance as well. Do not use the rack’s capacity alone as authorization to load the trailer or its bumper to that figure.

How to Choose a Trailer Generator Holder

Mounting location and fit

Choose the mounting style that matches your trailer and leaves equipment clear. The Stromberg Carlson CC-255 and KUQAE Trailer Tray are A-frame options, while the Nilight Bumper Cargo Rack and Kojem Bumper Carrier mount to the bumper. The Nilight specifies compatibility with 4- or 4.5-inch bumpers; Kojem lists 4.0, 4.5, 5.3, and 6.0-inch sizes and more.

LWHwareHT Trailer Tray adjusts three brackets for different tongue sizes and turning radius. A-frame buyers should measure around the jack and coupler; bumper buyers should confirm bumper dimensions and load approval.

Choose an adjustable tongue tray when frame geometry varies, and a bumper carrier only when the trailer’s bumper is suitable.

Listed load capacity

Look for a capacity that covers the loaded generator and any other gear, while staying within the trailer or mounting-point limit. The Stromberg Carlson CC-255 lists 300 pounds; Nilight lists 350 pounds; Kojem lists 200 pounds; and Mockins Hitch Tray lists 750 pounds. Those figures belong to different mounting systems, and Mockins specifies cars, trucks, and vans rather than trailers, so its rating does not make it a suitable trailer choice.

KUQAE and the second Stromberg Carlson listing provide no capacity in the supplied data. The 60LBS wording in the Emeroll Generator Rack title is ambiguous.

Buyers with a known, approved load should favor a clearly specified capacity; where it is absent or unclear, seek confirmation before loading.

Platform size and adjustability

Compare the actual footprint with your generator and the space available at the mounting point. Stromberg Carlson CC-255 lists dimensions of 35.98 by 24.02 inches, and Stromberg Carlson Trailer Tray lists 36 by 24 inches; Nilight’s bumper basket measures 32 by 26 by 4 inches. KUQAE describes adjustable height and width, while LWHwareHT uses three adjustable brackets, but neither listing supplies a complete platform-size specification here.

A fixed, measured platform helps buyers whose equipment and frame dimensions are known. An adjustable tray may suit owners accommodating different gear or tongue layouts, but adjustability does not guarantee clearance or capacity.

Measure the generator’s base and required tie-down space, then compare those dimensions with the tray and surrounding trailer hardware.

Which Trailer Generator Holder Should You Choose?

For a straightforward A-frame generator setup, choose the Stromberg Carlson CC-255: it names generator storage, lists a 300-pound capacity, and provides a 35.98-by-24.02-inch platform. If you want another A-frame option with a stated adjustable fit, the Stromberg Carlson Trailer Tray describes adjustment for most A-frame trailers. For variable tongue geometry, consider the KUQAE Trailer Tray or LWHwareHT Trailer Tray, but note that their supplied data does not establish a load rating.

If your trailer has an approved bumper mount, the Nilight Bumper Cargo Rack lists 350 pounds and includes a net; the Kojem Bumper Carrier lists 200 pounds and several bumper sizes. The Emeroll Generator Rack is explicitly generator-oriented, but its 60LBS wording is unclear.

Avoid the Mockins Hitch Tray for trailer use: its compatibility listing names cars, trucks, and vans.

Frequently Asked Questions

How do I check whether an A-frame tray will clear my trailer tongue jack?

Measure the available space around the jack and compare it with the tray’s listed dimensions before buying. Check clearance with the jack in its operating and travel positions, and consider room needed to access it. The CC-255 platform measures 35.98 by 24.02 inches; supplied data does not establish jack clearance.

Can a trailer bumper safely carry a generator and its fuel?

Only if the bumper, mounting points, and carrier are approved for the combined load. Include the generator, fuel and container, carrier, and other cargo when checking limits, and follow the trailer and carrier manufacturers’ instructions. Listed carrier capacities alone do not establish that a particular trailer bumper can support that load.

How should I secure a generator on a trailer rack for travel?

Use suitable restraints through secure points on the generator and rack, and check that the load cannot shift, tip, or interfere with trailer lights or moving parts. Follow the generator and rack instructions, then recheck the restraints before travel and at stops. The supplied product details do not specify a tie-down method.

How can I compare a rack’s capacity with my generator’s load?

Compare the complete carried load—not just the generator—with the rack’s stated capacity, and verify the trailer mounting point’s limit separately. The CC-255 lists 300 pounds, the Nilight carrier 350 pounds, and the Kojem carrier 200 pounds. Do not assume a rack rating confirms that your trailer can carry that load.

When should I choose a bumper carrier instead of an A-frame tray?

Choose a bumper carrier only when your trailer has a suitable, approved bumper mount and its load limits are verified. An A-frame tray is a more direct match when you want tongue-mounted storage; the CC-255 is explicitly presented for generator storage. For variable tongue geometry, the supplied data identifies adjustable options but does not establish their load ratings.

Final Words

For a straightforward A-frame generator setup, the Stromberg Carlson CC-255 is the clearest match: it names generator storage, lists a 300-pound capacity, and gives a 35.98-by-24.02-inch platform. Consider the adjustable tray options when fit is the priority, while confirming their load limits. For bumper mounting, compare Nilight and Kojem only after checking compatibility and capacity.

Avoid the Mockins hitch tray for trailer use because its compatibility listing names cars, trucks, and vans.

Leave a Reply

Your email address will not be published. Required fields are marked *