Best Fender Mount Cb Antenna for Different Vehicle Setups

#1 · Best Overall

1. UngSung Vehicle Z Bracket

• Weight: 0.08 kg
• Material: Stainless Steel
• Material Type: Stainless Steel

Best for: Multi-connector antenna setups.

Why it ranks #1: Its 16 mm hole accepts a 3/8-by-24 CB stud, and the 2.0 mm stainless bracket mounts between hood and fender.

A 16 mm mounting hole is the key feature of UngSung’s stainless-steel hood-and-fender bracket, accepting several listed connector styles. That range lets buyers choose among UHF-female, SO-239 stud, N-female, and 3/8-by-24 CB stud connections while using a bracket mounted between the hood and fender or mudguard.

The 2.0 mm stainless-steel plate mounts between the hood and fender, giving the antenna a vehicle-edge mounting point without requiring a separate trunk-lid location. Its 16 mm hole is specified for 5/8-inch connectors, including UHF-female, SO-239 stud, N-female, and 3/8-by-24 CB stud types. The listed fit for broomstick, whip, and spring-mount antennas makes it useful across several antenna styles, but buyers should match the connector and mounting arrangement to their setup.

Skip it if you need a 3/4-inch NMO opening; UngSung’s B09CTXHS8R bracket specifies a 20.5 mm hole for NMO connectors.

Choose this UngSung bracket if your CB, UHF, or VHF antenna uses one of the listed connectors and mounts between the hood and fender. Its 16 mm opening is the key fit boundary to check.

Listed on Amazon as: Vehicle Hood & Fender Stainless Steel Mount Bracket for CB UHF VHF Ham Radio Antenna Pole Z Mounting Bracket

#2 · Best Corded Option

2. HYS NMO Cable Kit

Best for: Prewired NMO and PL-259 kit.

Why it ranks #2: The stainless L-bracket takes a 3/4-inch NMO mount and includes about 13 feet of RG-58U coax with a PL-259 connector.

A preassembled NMO mount with roughly 13 feet of RG-58U coax and a PL-259 connector makes the HYS kit an integrated antenna-cable option. Its stainless-steel L-bracket is specified for fender, trunk-groove, side-panel, or hood installation, covering several vehicle mounting locations.

The approximately 4-meter RG-58U cable arrives terminated with a standard PL-259 UHF-male connector, which supports a ready cable path to compatible listed Motorola, Yaesu, Vertex, Kenwood, HYT, and Icom mobile radios. The 3/4-inch NMO-hole stainless-steel L-bracket can be installed at a fender, trunk groove, side panel, or hood, letting buyers choose among those locations. The cable length and connector type are the main practical checks for routing and radio compatibility.

Skip it if you need a 15-foot RG58 cable; Akoree’s B0DRJK8HYF lists that length with its NMO L-bracket mount.

Choose the HYS kit if a preassembled NMO base, 13-foot coax, and PL-259 connection fit your radio and cable route. Its multiple listed installation locations add flexibility, but routing length still matters.

Listed on Amazon as: HYS NMO Mount Cable Kit with 13ft RG58 Coax PL259 & Stainless L-Bracket

#3 · Vehicle-Specific Fit

3. Comet CV2ANTNCG Bracket

• Weight: 4 oz
• Material: Stainless Steel
• Material Type: Stainless Steel

Best for: Chevrolet and GMC bolt-on fit.

Why it ranks #3: This driver-side Chevrolet and GMC truck bracket uses an existing fender bolt, avoids drilling, and accepts a standard 3/4-inch NMO mount.

Using an existing fender bolt instead of drilling holes is the defining advantage of the Comet Antennas CV2ANTNCG for Chevrolet and GMC trucks. Its driver-side bracket fits the hood-and-fender gap, while a 3/4-inch hole accepts a standard NMO mount.

The vehicle-specific bracket installs on the driver’s side using an existing fender bolt, so the listed method avoids drilling new holes. Its 14-gauge stainless-steel construction is specified for stability, and the 3/4-inch opening accepts a standard NMO mount. The listing also describes a Comet SO-239 cable assembly with a large washer and jam nuts to keep the connector from falling through the opening. Driver-side-only installation is an important fit boundary.

Skip it if you need a passenger-side installation; UngSung’s B09CTXHS8R is a general hood-and-fender NMO bracket rather than a driver-side-specific mount.

Choose the Comet if you have a Chevrolet or GMC truck and want a driver-side fender bracket attached with an existing bolt. Its vehicle-specific fit and one-side installation limit where it can be used.

Listed on Amazon as: CV2ANTNCG Vehicle Specific Fender Bracket Antenna Mount (No Holes to Drill) for Chevrolet/GMC Trucks

#4 · Ford Truck Fit

4. iJDMTOY Ford Hood Bracket

• Weight: 4.8 oz
• Material: Metal
• Material Type: Metal

Best for: F-250 and F-350 hood edge.

Why it ranks #4: Designed for 2017–2022 Ford F-250 and F-350 trucks, it bolts between the driver-side hood and fender without modifications.

Vehicle-specific fit for 2017–2022 Ford F-250 and F-350 Super Duty trucks is the central feature of this iJDMTOY hood-edge bracket. Its bolt-on installation between the driver-side hood and fender uses included screws and washers, enabling installation without vehicle modifications.

The bracket is listed for 2017–2022 Ford F-250 and F-350 Super Duty trucks, narrowing its fit to those model years and truck lines rather than a general vehicle mount. Installation is described as bolt-on between the driver-side hood and fender, with screws and washers included and no modifications required. Heavy-duty polished stainless steel is specified for rust and dirt resistance, supporting use in rugged conditions. Check the stated truck fit before choosing this vehicle-specific option.

Skip it if you drive another vehicle; the Comet Antennas CV2ANTNCG is listed for Chevrolet and GMC trucks and uses an existing fender bolt.

This iJDMTOY mount fits buyers with a listed 2017–2022 F-250 or F-350 seeking a driver-side hood-edge installation without modifications. Its vehicle-specific fit is the essential boundary for choosing it.

Listed on Amazon as: iJDMTOY Hood Edge CB/Antenna Mounting Bracket for Ford 2017-2022 F250/F350

#5

5. Akoree NMO Fender Mount

Best for: Long-cable NMO L-bracket.

Why it ranks #5: Its stainless-steel L-bracket has a 3/4-inch NMO hole and includes approximately 15 feet of RG-58 coax for a wired installation.

A 15-foot RG58 cable paired with an NMO L-bracket gives the Akoree mount a useful reach for vehicle antenna routing. Its 3/4-inch hole and stated trunk-lid mounting arrangement help buyers match the bracket to an NMO antenna and an installation that uses self-tapping screws.

The listed 15-foot, approximately 4.6-meter RG58 coax provides a cable run for routing from the mount toward the radio, while the 3/4-inch hole specifies the NMO bracket opening. Its L shape is described as helping anchor the antenna mount to the hosting surface, and the installation uses self-tapping screws. Stainless steel is listed as sturdy and resistant to corrosion, scratches, and rust, supporting a rugged vehicle mounting role.

Skip it if you prefer a no-drill existing-bolt installation; Comet Antennas’ CV2ANTNCG uses a Chevrolet/GMC fender bolt.

The Akoree mount suits NMO users who need a 15-foot cable and an L-bracket secured with self-tapping screws. Its trunk-lid listing and drilling method are important installation considerations before selecting it.

Listed on Amazon as: NMO Bracket L Shape Fender Mount 3/4" Hole for VHF/UHF/CB Radi NMO Antenna

#6

6. UngSung NMO Fender Bracket

• Weight: 0.09 kg
• Material: Stainless Steel
• Material Type: Stainless Steel

Best for: Three-quarter-inch NMO mounts.

Why it ranks #6: The 2.0 mm stainless plate mounts between hood and fender and has a 20.5 mm hole for 3/4-inch NMO connectors.

A 20.5 mm hole sized for 3/4-inch NMO connectors makes this UngSung fender bracket a clear option for NMO antenna installations. Its 2.0 mm stainless-steel plate fits between the vehicle hood and fender, pairing a specified connector opening with a sturdy vehicle-edge mounting location.

This bracket’s 20.5 mm opening accepts 3/4-inch NMO antenna connectors, so buyers can select it when their mount uses that standard rather than a smaller opening. The 2.0 mm stainless-steel plate is specified as thicker and sturdier than the previous version, and its 4-3/4-by-1-5/8-inch dimensions provide a defined bracket footprint. Because installation is between hood and fender, it suits a vehicle-edge setup; the opening size remains the main compatibility check.

Skip it if you use a connector that needs a 16 mm hole; UngSung’s B08JPN3DF3 bracket lists that opening and several connector styles.

This is a fit-led choice for an NMO antenna owner who wants a stainless-steel bracket between hood and fender. Choose another opening size if your connector is not a 3/4-inch NMO type.

Listed on Amazon as: Fender Mount Antenna Bracket 3/4 inches Hole 2.0mm Thickness Stainless Steel Plate for CB UHF VHF Ham NMO Antenna Mount Between Vehicle Hood and Fender

#7

7. Laird Z Mount Bracket

• Weight: 0.02 kg
• Material: Stainless Steel
• Material Type: Stainless Steel

Best for: Simple heavy-duty Z bracket.

Why it ranks #7: This heavy-duty stainless-steel Z bracket has a 3/4-inch hole, but the listing does not specify a CB stud fit or include coax.

A heavy-duty Z-shaped stainless-steel profile defines Laird Technologies’ LBH3400 antenna bracket and gives buyers a compact mounting bracket with a 3/4-inch hole. That combination suits setups needing a Z-form mount and the specified opening, with self-tapping screws included for the installation.

The stainless-steel Z-shaped bracket provides a simple mounting form, while its 3/4-inch hole gives buyers a stated opening size to match against their antenna mount. The listed 3-by-4-by-3-inch dimensions help with judging the bracket’s physical footprint before installation. Self-tapping screws are included, providing the supplied fastening method. Since the product information does not identify a particular vehicle location or antenna connector type beyond the hole, those details need to align with the buyer’s setup.

Skip it if you need a bracket explicitly specified for hood-and-fender placement; UngSung’s B09CTXHS8R lists that location and a 3/4-inch NMO opening.

Pick the Laird LBH3400 when a stainless-steel Z shape, 3/4-inch hole, and supplied self-tapping screws match your installation plan. Its listing leaves vehicle location and connector details to verify separately.

Listed on Amazon as: Laird Technologies – 3/4 Hole Heavy Duty "Z" Shaped Antenna Mount Bracket

#8

8. eifagur Extended NMO Brackets

Best for: Two extended NMO brackets.

Why it ranks #8: The extended hood-and-fender brackets support a 3/4-inch NMO mount and CB antennas, though the listing gives limited material and fit details.

An extended bracket profile gives this eifagur pair extra reach for positioning an antenna between a vehicle’s hood and fender. The 3/4-inch hole is specified for a standard mount, and the two-bracket pack offers a useful option for buyers planning more than one mounting point.

The extended design provides extra reach, which can help position an antenna at the hood-and-fender area where this bracket is intended to sit. Its standard 3/4-inch hole is specified for CB, UHF, VHF, Ham, and NMO radio antennas, giving buyers several listed radio categories to consider. With two brackets included, the package supports having a pair on hand. The listing gives no material thickness, so buyers focused on that specification should weigh the stated fit and reach instead.

Skip it if you require a stated stainless-steel thickness; UngSung’s B09CTXHS8R specifies a 2.0 mm stainless-steel plate and NMO hole.

Consider this pair if extra reach, a 3/4-inch opening, and coverage across the listed radio antenna categories suit your hood-and-fender setup. Buyers prioritizing specified material thickness should note that it is not provided here.

Listed on Amazon as: A Pair NMO Antenna Mount 3/4" Hole Thick Steel Mounting Bracket

#9

9. Wilson 305-700 Mount

• Weight: 11.36 oz

Best for: Wilson heavy-shaft antennas.

Why it ranks #9: This mount targets Wilson and heavy-shaft oil-can antennas and uses an SO-239 connector, but the listing does not establish a fender-bracket design.

Compatibility with Wilson and heavy-shaft oil-can-type antennas makes the Wilson 305-700 a specialized CB antenna mount rather than a general-purpose fender bracket. Its aircraft-quality aluminum body, stainless-steel hardware, and ABS gum-drop stud provide the listed mounting construction for those antenna styles.

The aluminum mount is specified for Wilson and heavy-shaft oil-can-type antennas, so that compatibility should guide selection before installation. Stainless-steel hardware is listed for corrosion resistance in harsh weather, while the ABS gum-drop stud provides the stated mounting stability. The additional description identifies an SO-239 connector for plug-to-plug hookup, which is relevant when matching the cable connection. The supplied facts do not specify a fender location or vehicle mounting method.

Skip it if you need a fender bracket with a stated vehicle mounting method; Comet Antennas’ CV2ANTNCG specifies hood-and-fender placement and an existing bolt.

This Wilson mount suits buyers using a Wilson or heavy-shaft oil-can-type CB antenna and an SO-239 hookup. Its specialized antenna compatibility and unspecified vehicle mounting method are the key fit boundaries.

Listed on Amazon as: Wilson 305-700 Aluminum CB Antenna Mount