Best Electric Tarp System For Dump Trailer

#1 · Best Overall

1. Carolina Tarps Underbody System

• Material: Alloy Steel, Alluminum
• Dimensions: 95"L x 8"W
• Dimensions L x W: 95"L x 8"W
• Size: 28'

Best for: Long-bed underbody installation.

Why it ranks #1: Purpose-built as an electric underbody flip tarp for trailers up to 28 feet, with a motor, spring assemblies, aluminum arms, and tarp axle listed.

Underbody spring assemblies and a direct-drive layout distinguish this Carolina Tarps system, which is specified for dump bodies up to 28 feet. Its polished aluminum arms and included motor, axle and mounting components make it a complete hardware package for buyers seeking a front-to-back electric tarp arrangement.

The 90:1 Super Duty tarp motor supplies powered operation, while the underbody spring assemblies and aluminum arms form the tarp mechanism beneath the trailer body. That arrangement can suit buyers who prefer an underbody system rather than a conventional side-mounted assembly. The kit also lists aluminum corners, pivot casting, tarp spool mounting brackets, an axle bearing, stud shaft and centering flanges, so the package covers key mounting and tarp-guiding parts for bodies up to 28 feet.

Skip it if you need the tarp included; the ALL TRUCK PRODUCTS ATP4SPA system supplies a mesh cover up to 7'6" x 24'.

This system fits trailer operators with bodies up to 28 feet who want a front-to-back, direct-drive underbody arrangement and a broad set of included hardware. The supplied listing does not identify a tarp, so plan for the cover separately.

Listed on Amazon as: Dump Trailer Tarp System | Electric Underbody Aluminum Flip Tarp for Trailers Up to 28'

#2 · Tarp Included

2. ALL TRUCK PRODUCTS 4-Spring Kit

• Material: Aluminum
• Dimensions: 307.09"L
• Dimensions L x W: 307.09"L
• Size: 7'6" x 26'

Best for: Bolt-on kit with large mesh tarp.

Why it ranks #2: Includes a mesh tarp and a 1.5 HP, 50:1 motor; its stated fit is dump bodies up to 23 feet, with a bolt-on assembly and no welding needed.

A mesh tarp measuring up to 7 feet 6 inches by 24 feet comes with the four-spring kit, giving operators a substantial supplied cover for beds up to 23 feet. The bolt-on assembly needs no welding, and its telescoping polished aluminum arms use side-mounted pivots for a configurable installation.

The 1.5-horsepower, 50:1 12-volt direct-drive motor works with a rotary switch and 60 feet of 8-gauge dual-conductor cable, supporting powered tarp operation with a long wiring run. The 95-inch extruded aluminum axle accepts a tarp by spline, grommets or pocket, while the included mesh has sewn-in 2-inch webbing and side grommets spaced every 24 inches. Bolt-on mounting avoids welding; optional angles allow installation flexibility.

Skip it if you need a system rated beyond 23 feet; the Carolina Tarps underbody system, model Dump Trailer Tarp System, is listed for bodies up to 28 feet.

For operators with dump bodies up to 23 feet who want a supplied mesh tarp and a no-weld bolt-on installation, this kit combines motor, wiring and arms. Its bed-length ceiling and 95-inch axle are important fit boundaries.

Listed on Amazon as: Electric Aluminum Arm 4 Spring Dump Truck Flip Tarp System Kit up to 23' Bed, Tarp Included (7'6" x 26')

#3 · Wide-Bed Fit

3. Kym Industries 4-Spring System

• Material: Black mesh

Best for: Adjustable-width 20-foot setup.

Why it ranks #3: Includes a black mesh tarp, 12V 50:1 motor, switch, and cable; adjustable axle and cross tube accommodate widths up to 110 inches.

A no-cut, no-drill adjustable aluminum axle and cross tube accommodate widths up to 110 inches, making this Kym Industries system useful for operators who need width adjustment without cutting the axle. It includes a black mesh tarp and a 12-volt, 50:1 Apache electric motor for beds with up to 20 feet of coverage.

The 78-inch lower and 93-inch upper polished aluminum arms are paired with the adjustable axle and cross tube, allowing the assembly to span widths up to 110 inches while avoiding cutting or drilling. The axle accepts tarps with plastic spline or grommets, and the included black mesh cover measures 7 feet 6 inches by 18 feet. A rotary switch and 50 feet of all-copper 6-gauge cable complete the electric control setup.

Skip it if you have a bed longer than 20 feet; the Kym Industries system, B085WD7N49, lists coverage up to 24 feet.

Choose this system for a dump bed up to 20 feet where width adjustment, included mesh and powered operation matter. Its adjustable axle supports widths up to 110 inches, but the stated bed-length limit rules it out for longer bodies.

Listed on Amazon as: Kym Industries Electric Aluminum 4-Spring Dump Truck Tarp System with TARP for Beds Up to 20' and 110" Wide. (Black mesh, 7'6"x18')

#4

4. Kym Industries Mesh Tarp System

• Material: Black Mesh
• Dimensions: 216"L x 94"W
• Dimensions L x W: 216"L x 94"W
• Size: 7'6" x 18'

Best for: Mesh-covered long-bed setup.

Why it ranks #4: Pairs a black mesh tarp with polished aluminum arms and states coverage for beds up to 24 feet and 110 inches wide.

The included 7-foot-6-inch by 18-foot black mesh tarp gives buyers a ready-to-cover package, while polished aluminum arms provide up to 24 feet of coverage. Kym Industries specifies fit for beds up to 24 feet long and 110 inches wide, making this a candidate for operators who need both a cover and extended arm reach.

The package pairs a black mesh tarp with 93-inch upper and lower polished aluminum arms, so buyers receive the cover and arm assembly together rather than sourcing a tarp separately. The stated coverage reaches 24 feet, while the listed tarp measures 7 feet 6 inches by 18 feet; those figures help clarify the system's arm reach and supplied cover dimensions. Rust-proof, lightweight aluminum supports a durable assembly without the weight of a steel arm system.

Skip it if you need a longer supplied mesh tarp; the ALL TRUCK PRODUCTS system, ATP4SPA, includes mesh up to 7'6" x 24'.

This package suits dump-truck owners seeking a mesh tarp and aluminum arms in one purchase, especially when the bed is within the listed 24-foot length and 110-inch width limits. The supplied tarp is 18 feet long, so check that coverage requirement carefully.

Listed on Amazon as: Kym Industries Electric Aluminum 4-Spring Dump Truck Tarp System with 7'6" x 18' Black Mesh Tarp for Beds Up to 24' and 110" Wide

#5 · Tarp-Free Compatible

5. Carolina Tarps Aluminum System

• Material: Aluminum
• Dimensions: 288"L x 95"W
• Dimensions L x W: 288"L x 95"W
• Size: 95" Wide w/o Wind Deflector

Best for: Cab-operated aluminum retrofit.

Why it ranks #5: Its rustproof aluminum 4-spring system includes installation hardware, rotary switch, and 50 feet of 6-gauge cable, but the tarp is not included.

A 50-foot run of 6-gauge dual-conductor battery cable lets the rotary switch operate the tarp from the cab or ground, reducing the need to climb onto the truck for routine covering. Carolina Tarps supplies a four-spring aluminum system with installation hardware, while leaving tarp choice open for buyers who already have a compatible cover.

The 288-by-95-inch system uses rust-proof aluminum, which keeps the arms lightweight while resisting pitting and preserving a polished finish. Its rotary switch and 50-foot cable support control from either the cab or ground, a practical advantage when positioning around a load. The kit includes pivot pins, spiral torsion springs, mounting hardware and a tarp axle, and accepts covers with grommets or a spline. The tarp itself is not included, so buyers must source one separately.

Skip it if you need a supplied mesh cover; the Kym Industries 7'6" x 18' system, B085WD7N49, includes one.

For dump-truck operators who want electric tarp control at the cab or ground and already have a grommet- or spline-compatible cover, this aluminum kit is a practical fit. Account for the tarp purchase separately and verify the 95-inch width suits the body.

Listed on Amazon as: Electric Aluminum 4-Spring Dump Truck Tarp System

#6

6. Buyers Products Aluminum System

• Material: Aluminum
• Dimensions: 80"L x 20"W
• Dimensions L x W: 80"L x 20"W
• Size: 10 x 80 x 20

Best for: Aluminum side-mount fleet kit.

Why it ranks #6: Covers dump bodies from 14 to 23 feet and includes a wind deflector and 600W, 90:1 gear motor; the tarp is sold separately.

Fingertip electric controls make this Buyers Products aluminum side-mount system straightforward to operate, while its listed 14-to-23-foot range serves a broad span of dump bodies. The kit includes a wind deflector, but not a tarp, so it suits buyers who already have or plan to source a compatible cover.

Weather- and corrosion-resistant aluminum components support repeated work in exposed truck environments, and fingertip controls put powered operation within easy reach. Buyers Products lists fit for dump bodies from 14 to 23 feet, helping buyers screen for length before installation. The included wind deflector is a useful system component, but the tarp is sold separately; plan to source the cover and account for that separate installation item when assembling the complete setup.

Skip it if you need a supplied tarp; the Buyers Products 14–23-foot steel kit, model 5549306, includes installation hardware, though its listing also does not specify a tarp.

This is a fit for dump-body operators seeking fingertip controls, aluminum construction and a wind deflector across the 14-to-23-foot range. It is not a complete cover package: buyers must source the tarp separately.

Listed on Amazon as: Buyers Products 5545000 14-23 Foot Aluminum Dump Body Tarp Mounting System w/Side Spring Pivot, 600W/90:1 Gear Motor, W/Wind Deflector, Tarp Sold Separately

#7 · Higher Motor Power

7. Buyers Products 900W Steel Kit

Best for: Steel kit with wind deflector.

Why it ranks #7: Offers a 900W, 90:1 motor, five springs, and a wind deflector for dump bodies from 14 to 23 feet.

A 900-watt, 90:1 gear motor and included wind deflector distinguish this five-spring Buyers Products steel kit for 14-to-23-foot dump bodies. Fingertip controls support straightforward electric operation, while corrosion-resistant steel components serve operators seeking a steel side-mount system with the deflector supplied.

The 900-watt, 90:1 motor powers the five-spring tarp system, and fingertip controls keep operation accessible at the truck. The stated 14-to-23-foot body range helps fleets check length compatibility, while weather- and corrosion-resistant steel components suit exposed work conditions. The wind deflector is included, unlike configurations that omit it, and the listing says each kit includes installation hardware. No tarp is identified as included, so plan to provide the cover separately.

Skip it if you need a supplied tarp; the ALL TRUCK PRODUCTS ATP4SPA kit includes a mesh cover up to 7'6" x 24'.

For dump-body operators who want a steel five-spring kit, 900-watt motor and included wind deflector within the 14-to-23-foot range, this package covers key hardware needs. The tarp is not specified as included, so source the cover separately.

Listed on Amazon as: Buyers Products 14-23 Foot Steel Tarp Kit 900W/90:1 Gear Motor – 5 Springs with Wind Deflector

#8

8. Buyers Products 600W Steel Kit

Best for: Steel side-mount without deflector.

Why it ranks #8: Fits dump bodies from 14 to 23 feet and has five springs with a 600W, 90:1 gear motor; this version omits the wind deflector.

A 600-watt, 90:1 gear motor and fingertip electric controls headline this Buyers Products steel kit for dump bodies from 14 to 23 feet. It uses five springs and corrosion-resistant steel components, while omitting a wind deflector for buyers who do not need that component in their setup.

The five-spring assembly works with the 600-watt, 90:1 motor to power tarp movement, and fingertip controls simplify operation from the truck. Buyers Products specifies compatibility with dump bodies 14 to 23 feet long, a useful boundary for fleets selecting a common system across vehicles. Steel components are described as weather- and corrosion-resistant. The kit includes installation hardware, but the listing identifies no wind deflector, making that omission relevant to buyers planning the complete tarp arrangement.

Skip it if you want a wind deflector included; the Buyers Products steel kit, model 5549395, lists one in its title.

This kit suits dump-body operators who need a five-spring steel system with fingertip controls across the 14-to-23-foot range. Its stated configuration omits a wind deflector, so consider that boundary when specifying the complete tarp installation.

Listed on Amazon as: Buyers Products 14-23 Foot Steel Tarp Kit 600W/90:1 Gear Motor – 5 Springs Without Wind Deflector

#9

9. Carolina Tarps Steel System

• Material: Steel

Best for: Steel kit for compact beds.

Why it ranks #9: Includes a zinc-plated steel arm set, motor, switch kit, wiring, tarp spool, and hardware for beds up to 20 feet and under 95 inches wide.

Adjustable arms fit dump beds up to 20 feet and under 95 inches wide, giving this Carolina Tarps steel system a clearly defined fit range. The zinc-plated four-spring kit includes electrical components and installation hardware, while leaving the tarp and wind deflector out of the package.

Zinc-plated steel arms form the roll-up system, and the included motor, switch kit, wiring, tarp spool, springs and mounting hardware supply the core installation components. Adjustable arms support different dump-bed lengths within the 20-foot maximum, while the under-95-inch width limit provides a firm boundary for screening compatibility. Because the tarp and wind deflector are excluded, buyers can choose a cover separately but must source both items before the setup is complete.

Skip it if you need a wind deflector in the kit; the Buyers Products 5545000 aluminum system, B07F4XB1M8, includes one.

This kit suits operators with dump beds no longer than 20 feet and narrower than 95 inches who want steel arms and electrical hardware in one package. The tarp and wind deflector are separate purchases, so it is not ready to cover loads alone.

Listed on Amazon as: Steel Dump Truck Tarp System for Dump Beds Up to 20' Long and Under 95" Wide

#10

10. Mytee Products Gantry System

• Material: Steel and Aluminum
• Dimensions: 10"L x 10"W
• Dimensions L x W: 10"L x 10"W

Best for: Roll-off fleet stationary gantry.

Why it ranks #10: Designed for 20- to 40-yard roll-off containers with a fixed steel gantry, five-spring arms, and 600W motor, making it less targeted to ordinary dump trailers.

A fixed steel gantry covers 20-to-40-yard containers, giving roll-off operators a stationary-frame alternative to a conventional side-mounted arm kit. Mytee Products pairs the frame with five-spring aluminum arms and a 600-watt, 60:1 12-volt motor, plus a wind deflector and 16-foot wiring run.

The 20-foot gantry has a 94-to-98-inch width range and a 7-foot-3-inch height, while the listed container compatibility spans 20 to 40 yards. Its fixed-frame construction offers a stable setup for roll-off work, and the 78-inch lower and 102-inch upper aluminum arms work with a 102-inch axle and cross tube. A 600-watt motor and 16-foot, 6-gauge dual wire provide the powered system components; the 102-inch wind deflector is included.

Skip it if you need a longer battery cable run; Carolina Tarps' Electric Aluminum 4-Spring system, B07MD6CXB9, includes 50 feet of cable.

For roll-off operators using 20-to-40-yard containers who want a fixed gantry with five-spring arms, this kit consolidates frame, motor and wind deflector. Its 16-foot wire run and 94-to-98-inch width range are key installation boundaries.

Listed on Amazon as: Mytee Products 5-Spring Stationary Gantry Electric Tarp System – Heavy Duty Dump Truck Tarping Kit with Steel Frame, Aluminum Arms & 12V Motor for 20-40 Yard Roll-Off Dump Trucks & Trailers