Best Electric Motor For Trike: 10 Motors and Conversion Kits

#1 · Best Overall

1. Unndysrt 48V 750W Kit

• Material Type: Copper,Iron,Aluminum,Magnet
• Material: Copper,Iron,Aluminum,Magnet

Best for: Commuter trike conversion kit.

Why it ranks #1: A tricycle conversion kit with motor, controller, #420 chain, and 38-tooth chain wheel; it also lists an LED display and 750W output.

The included 750W brushless motor and controller make this Unndysrt kit a ready starting point for converting a human-powered tricycle to electric assist. Its listed 13.67 mph speed with 26-inch wheels gives commuters a concrete performance reference, while the LED display and light source support riding information and visibility.

The kit includes a #420 chain and 38-tooth chain wheel alongside the motor and controller, so the main drive components come together for a DIY conversion rather than requiring each of those parts to be sourced separately. The stated speed applies with 26-inch wheels, which are not included, so wheel size is a practical setup consideration. Its listed compatibility includes commuting, folding, and small freight tricycles, and the bright light source can help in low-visibility conditions.

Skip it if you need the wheel set included; the stated 13.67 mph figure uses 26-inch wheels that are not supplied.

A DIY commuter or light-cargo trike builder can use the motor, controller, chain, and chain wheel as a coordinated conversion starting point. The speed reference depends on 26-inch wheels, which buyers must provide separately.

Listed on Amazon as: 48V 750W Electric Brushless DC Motor Kit, Electric Tricycle Conversion Set with LED Display, DIY 3-Wheel Bike E-Tricycle Pure Copper Motor Kit with Motor Controller

#2 · Best Load Support

2. FUIHCIQ 48V 750W Motor

Best for: Load-carrying trike upgrade.

Why it ranks #2: Its listed 661.39-pound load capacity and 15.36 N·m torque suit demanding trike use, though the specifications list only a motor as included.

A stated 661.39-pound load capacity is the clearest differentiator of this FUIHCIQ 750W brushless conversion kit, making it relevant to riders carrying goods on a tricycle. Its 15.36 N·m torque and LED headlight add practical context for climbing and low-light use, while the motor is specified at greater than 82% efficiency.

The 15.36 N·m torque is listed for climbing capability, while the 661.39-pound capacity speaks to carrying a load; together, those figures address two important demands of a utility trike. The motor reaches roughly 13.67 mph with 26-inch wheels, which are not included, so the stated speed depends on the wheel setup. An LED headlight supports visibility after dark, and a junction box protects wire connectors as part of the electrical installation.

Skip it if you need a complete wheel-and-drive package; this listing specifies a 750W motor but does not list a chain or chain wheel among included components.

This suits a trike owner prioritizing listed load capacity, climbing torque, and a headlight for after-dark travel. The speed reference relies on 26-inch wheels, and the included-components listing names the motor only.

Listed on Amazon as: 48V 750W Electric Brushless DC Motor Kit, w/LED Display & Motor Controller

#3 · Multi-Voltage Pick

3. Pnpaea Differential Motor

• Weight: 2.9 kg
• Material Type: Synthetic
• Material: Synthetic

Best for: Differential trike conversion.

Why it ranks #3: This tricycle and four-wheeler differential motor is offered across 48V, 60V, and 72V descriptions, with a five-hole, 16-tooth format.

Its built-in intelligent differential system is the defining feature of Pnpaea’s brushless motor, distributing power between left and right wheels to support more synchronized turning. The listing also specifies a 16-tooth shaft, five-hole mounting pattern, and 3000 RPM, giving DIY trike and four-wheeler builders concrete drivetrain details to evaluate.

The differential’s automatic adjustment of power distribution between the two wheels is intended to support stability while turning, a practical consideration for three- and four-wheel builds. A five-hole mounting pattern and 16-tooth shaft identify the motor’s interface, so builders can assess whether their drivetrain arrangement matches those details. The thickened aluminum-alloy shell and copper coil are listed construction features, while the product title spans 48V, 60V, and 72V applications; check the selected electrical setup against the project requirements.

Skip it if you want a complete conversion kit with controller, chain, and display; this listing focuses on the differential motor.

A DIY builder seeking a differential motor for a trike or four-wheeler may value its specified shaft and mounting pattern. Account for the selected voltage and drivetrain interface before planning the installation.

Listed on Amazon as: 550W-2000W Electric Tricycle Motor with Controller 48V/60V /72V Permanent Magnet Brushless Differential Motor 3000RPM 5-Hole 16-Tooth Motor for Tricycle, Four-Wheeler 60V-1000W

#4 · High-Power Differential

4. YC Yier 72V 1500W Motor

• Material Type: Aluminum
• Material: Aluminum

Best for: 72V differential trike projects.

Why it ranks #4: A 72V 1500W brushless differential motor expressly intended for electric trikes, with a 16-tooth gear shaft and 90-day warranty.

A 72V, 1500W differential motor gives the YC Yier a clearly stated electrical setup for electric trikes, go-karts, and other multi-wheel projects. Its integrated differential structure is presented as supporting smooth, stable power delivery, while the 16-tooth gear shaft identifies a specific drivetrain interface for a builder to consider.

The integrated differential is relevant to multi-wheel layouts because the product is specifically presented for tricycles, four-wheelers, and similar vehicles, with smooth power delivery among its stated traits. Its 16-tooth gear shaft provides a concrete mechanical detail for planning the drivetrain. Thickened pure-copper coils are described as low-resistance and conductive, with reduced heat generation during use. The included-components specification names a speed controller, so buyers should account for the product’s listed package rather than assume additional drive parts are included.

Skip it if you need a listed chain and throttle alongside the motor; the included-components specification names a speed controller only.

A builder planning a 72V trike, go-kart, or four-wheeler can shortlist this motor for its differential and 16-tooth shaft. Check the remaining drivetrain and control components needed for the specific build.

Listed on Amazon as: 72V 1500W Electric Tricycle Motor Permanent Magnet Brushless Differential Motor, 16T Gear Shaft for Electric Go Kart Trike ATV Quad Buggy, Four-Wheeler, DIY Part

#5

5. VitalisWorks 72V 2000W Motor

Best for: High-load 72V trike builder.

Why it ranks #5: The selected configuration is 72V and 2000W, and the listing targets tricycle, quad-bike, and go-kart modifications with a 16-tooth, five-hole design.

The 72V 2000W configuration gives this VitalisWorks motor a clear high-power target for trike, quad-bike, and go-kart modifications. Its thickened copper coil is associated with stronger climbing ability and smoother output, while the brushless differential layout is listed for DIY multi-wheel vehicle use.

The thickened pure-copper coil is described as providing strong conductivity and supporting climbing, which matters for a trike expected to handle inclines or heavier daily-use demands. A brushless differential motor is also described as generating little heat, while the thickened aluminum-alloy shell is presented for impact resistance and load-bearing strength. The listing offers 48V, 60V, and 72V versions and several power ratings; the title identifies this selection as 72V 2000W, so configuration choice is central to matching a build.

Skip it if you want a single, fully specified voltage-and-power listing without variants; this product spans several configurations.

This is aimed at builders seeking a higher-power differential motor for a trike or quad-style project, especially where climbing matters. Match the selected 72V 2000W version to the vehicle’s electrical setup.

Listed on Amazon as: 1500W/1800W/2000W Electric Tricycle Motor, 48V/60V/72V Three-Wheeled Bicycle Motor 16 Teeth, 5 Holes for DIY, Tricycle, Quad Bike, Go-Kart Modification (72v 2000W)

#6

6. ZHOZHUT 72V 2000W Motor

• Weight: 7 kg
• Material Type: Metal
• Material: Metal

Best for: Quiet 2000W differential build.

Why it ranks #6: A 2000W differential motor for tricycles and quadricycles, with a 72V selection, 16-tooth shaft, and 3200RPM listed speed.

A rear-housing heat-dissipating shroud distinguishes this ZHOZHUT 2000W differential motor, with cooling presented as a way to support motor life. Its 16-tooth shaft and five-hole pattern provide useful drivetrain and mounting details, while the brushless design is described as operating with lower noise.

The rear cooling shroud is specifically listed to improve heat dissipation, a practical consideration during operation. Thickened aluminum-alloy housing and laminated tile-shaped magnets are also identified as construction features, with the housing described as wear-resistant and load-bearing. For installation planning, the motor’s five-hole mounting pattern and 16-tooth shaft give builders concrete interface details. The title spans 48V, 60V, and 72V versions, so the chosen voltage needs to match the trike’s electrical system.

Skip it if you need a complete motor kit with controller and throttle listed; this product is presented as a differential motor.

A DIY builder seeking a quieter 2000W differential motor with a specified shaft and mounting pattern may find this a useful starting point. Confirm the selected voltage and plan for other conversion components separately.

Listed on Amazon as: 3200RPM Electric Tricycle Differential Motor 2000W Brushless DC Motor 48V / 60V / 72V Pure Copper Core Motor, Aluminum Alloy Shell, for DIY Electric Tricycles and Quadricycles,2000w,72V

#7

7. Ofyphth 60V Differential Motor

• Weight: 3.1 kg
• Material Type: Synthetic
• Material: Synthetic

Best for: Low-noise custom trike builder.

Why it ranks #7: Its 60V-650W configuration is a lower-output differential option for DIY tricycles and quadricycles, with a brushless design and copper coil.

Low-noise brushless operation is the leading practical distinction of this Ofyphth differential motor, aimed at custom electric tricycle and quadricycle builds where reduced mechanical noise matters. Its pure-copper coil and gear reduction are also identified features: the listing connects the gear reduction with more low-end torque than a standard motor.

The brushless design is described as reducing vibration and mechanical friction, which supports the stated quieter operation for commuting or cargo hauling. Gear reduction is listed as a source of more low-end torque than a standard motor, a useful characteristic when a custom vehicle needs stronger pull from lower speeds. The thickened copper wire is described as conductive and generating little heat during use. The product is presented as a motor for DIY builds, not a complete conversion kit.

Skip it if you need a motor, controller, throttle, and chain in one package; this product listing identifies the motor rather than a complete kit.

A custom tricycle or quadricycle builder who values low-noise operation and gear-reduction torque can consider this motor. Plan separately for the rest of the electrical and drivetrain components, which are not listed as a kit.

Listed on Amazon as: Electric Tricycle Differential Motor, 350W-1800W Brushless DC Motor, Pure Copper Core Motor, Pure Copper Core Motor, for DIY Electric Tricycles and Quadricycles. 60V-650W

#8

8. S28ZSO Differential Motor

• Weight: 50 g

Best for: Basic differential motor replacement.

Why it ranks #8: Explicitly described as a permanent-magnet brushless differential motor for trikes, but the listing gives limited detail beyond voltage and 1000W/1200W options.

A 16-gear shaft and permanent-magnet brushless differential format are the clearest identifying details of this S28ZSO tricycle motor. The title spans 48V, 60V, and 72V options and 1000W or 1200W ratings, making it a potential component for builders selecting among several electrical configurations.

The differential motor format identifies it for tricycle-style builds, while the 16-gear shaft gives a mechanical detail for evaluating the drive connection. Its title lists multiple voltage and power combinations, including a 72V 1000W selection, so buyers need to distinguish the desired version before planning an electrical installation. The supplied specifications provide no further controller, speed, mounting-pattern, or material details, which limits how much can be established from this listing alone.

Skip it if you need stated RPM, mounting-pattern, or controller details before selecting a motor; these are not provided in the listing information.

A trike owner seeking a basic differential motor with a 16-gear shaft may consider this listing if its available configuration matches the project. The sparse specifications make electrical and installation planning less detailed than for more fully described options.

Listed on Amazon as: Electric Tricycle Motor 48v/60v/72v/1000w 1200w Permanent Magnet brushless Differential Motor, 16 Gear Shaft(72V 1000W)

#9

9. ZHOZHUT High-Speed Motor

• Weight: 6 kg
• Material Type: Metal
• Material: Metal

Best for: Higher-speed trike drivetrain.

Why it ranks #9: A tricycle motor with 1500W/2000W and 60V/72V variants, plus 4500RPM/5000RPM descriptions; confirm the exact configuration before selecting.

The listed 4500 or 5000 RPM options make this ZHOZHUT motor the speed-focused choice for a compatible electric-trike or go-kart project. Its 16-tooth output shaft and five-slot mounting detail provide installation references, while the thickened aluminum-alloy housing and laminated magnets are listed as construction features.

The stated 4500/5000 RPM motor speed gives builders a concrete reference when evaluating a higher-speed drivetrain, though the listing does not supply a vehicle speed figure. A 16-tooth output shaft with standard tooth grooves is described for stable operation and easier mounting, and the five-slot pattern adds a mounting detail for installation planning. The thickened aluminum housing and tile-shaped magnets are presented as durable construction. Voltage options include 60V and 72V, so electrical compatibility matters.

Skip it if you need a stated road-speed estimate rather than motor RPM; this listing provides 4500/5000 RPM figures only.

This suits a builder selecting a higher-RPM motor for a trike or go-kart drivetrain and planning around its 16-tooth shaft. Treat RPM as a motor specification, not a guaranteed vehicle speed, and match voltage to the build.

Listed on Amazon as: 4500RPM / 5000RPM Electric Tricycle Motor 1500W / 2000W High-Speed Motor for Electric Tricycles 60V / 72V Permanent Magnet Synchronous Motor for Tricycles, Go-Karts, DIY Kits

#10

10. Kunray 48V 2000W Kit

• Weight: 6 kg
• Material Type: Aluminum
• Material: Aluminum

Best for: High-output DIY drivetrain builder.

Why it ranks #10: This 48V kit includes a 2000W motor, 33A controller, and throttle, but its listing does not specifically identify tricycle compatibility or a differential drive.

A 2000W peak rating paired with a 33A controller makes the Kunray kit the high-output, component-inclusive option in this group. Its 48V brushless motor is specified at 4300 rpm under no-load conditions, and the package includes a throttle, giving a builder core electrical controls alongside the motor.

The aluminum-bodied motor uses a full copper coil and natural air cooling, features listed to support heat management without a separate cooling system being specified. The 15-MOSFET, 33A controller and included throttle provide key control components for a 48V build, while the motor’s stated maximum current is 42A. A T8F 11-tooth sprocket chainwheel is listed, so the builder can plan around that drive interface. The listing does not identify this as a tricycle-specific differential motor.

Skip it if you require a differential motor for coordinated left-and-right wheel drive; YC Yier’s 72V 1500W listing specifies a differential structure.

This suits a DIY builder seeking a 48V motor, controller, throttle, and specified sprocket in one package. Its T8F 11-tooth drive interface and 42A maximum current are important planning details for a trike installation.

Listed on Amazon as: Electric Brushless DC Motor Kit,48V 2000W Motor,33A Controller,LCD Throttle