Best Dump Pumps For Trucks: PTO and 12V Options

#1 · Best Overall

1. National Drivetrain C102

• Weight: 75 lb

Best for: Air-Shift PTO Dump Trucks.

Why it ranks #1: Its direct-mount PTO design targets dump trucks, with 49 GPM at 1,800 RPM, air-shift control, and a stated 2,500 PSI working-pressure rating.

A 49 GPM flow rate at 1,800 RPM gives this direct-mount PTO pump a high-flow option for dump-truck hydraulic systems. Its 7/8-inch, 13-spline shaft and air-shift control make it a fit for buyers matching those specific driveline and control requirements.

The direct-mount configuration and 7/8-inch, 13-spline shaft define the PTO interface, so installation depends on a matching drive setup. At 49 GPM at 1,800 RPM, it targets high-flow truck applications; the listed 2,500 PSI working pressure sets a separate operating specification. Air-shift control supports remote operation within a PTO system. The mounting bracket assembly is sold separately, which matters when planning the installation.

Skip it if you need a pump supplied with its mounting bracket; the ATRACYPART C102 lists extended studs and a pre-mounted air shifter.

This National Drivetrain pump suits truck owners replacing or configuring a direct-mount PTO system that calls for its shaft, rotation, and air-shift arrangement. Account for the separately sold bracket and verify the PTO interface before installation.

Listed on Amazon as: PTO Dump Pump C102 Hydraulic Pump 49 GPM with Air Shift Cylinder 7/8"

#2 · Best Cable Shift

2. World American 49 GPM Pump

• Weight: 69.9 lb
• Dimensions: 9.5 x 6.25 x 2.5 in

Best for: Cable-Shift PTO Dump Trucks.

Why it ranks #2: This C-series direct-mount pump is built for PTO-driven dump trucks and lists 49 GPM at 1,800 RPM, 3,000 PSI, and cable-shift linkage.

A cable-shift linkage distinguishes this 49 GPM PTO dump pump, giving truck operators a control arrangement specified for cable operation. Its C-series direct-mount gear-pump design and left-hand rotation target PTO-driven dump-truck hydraulic systems with matching interfaces.

The 49 GPM rating at 1,800 RPM identifies the pump’s stated flow, while its 3000 PSI maximum working pressure provides a pressure figure for system matching. A C-series direct-mount design and left-hand rotation define important installation requirements; the cable-shift linkage distinguishes its control method from air-shift PTO arrangements. Factory-set rotation and extended studs for support brackets are also listed, making rotation and bracket support part of the fit check.

Skip it if you need air-shift operation; National Drivetrain’s C102 pump lists an air-shift control mechanism.

This World American pump fits dump-truck owners configuring a PTO-driven system with cable-shift control, left-hand rotation, and direct mounting. Its 49 GPM flow and 3000 PSI rating are useful matching points, but the linkage must suit the truck.

Listed on Amazon as: World American 49 GPM PTO Hydraulic Dump Pump with Cable Shift 3000 PSI

#3 · Best Air Shift

3. ATRACYPART C102 Pump

• Weight: 74.8 lb

Best for: High-Flow Air-Shift PTO Systems.

Why it ranks #3: The PTO-oriented C102 provides 49 GPM at 1,800 RPM and includes a pre-mounted air shifter cylinder, extended studs, and cylinder sleeve.

The C102 pump delivers up to 49 GPM at 1,800 RPM and arrives with a pre-mounted air shifter cylinder. That pairing targets heavy-duty PTO dump-truck or trailer systems where high flow and an integrated air-shift assembly suit the installation.

Its 7/8-inch, 13-tooth spline shaft identifies the drive interface, while the 49 GPM rating at 1,800 RPM supports high-flow hydraulic work. A pre-mounted air shifter cylinder, extended studs, and cylinder sleeve can simplify assembly into a PTO application by supplying those specified components together. The listing describes a heavy-duty build with roller bearings and pressure-balanced thrust parts, but does not provide a working-pressure figure to compare against a system requirement.

Skip it if you must match a stated working-pressure rating; National Drivetrain’s C102 listing specifies 2500 PSI working pressure.

Choose this ATRACYPART C102 for a PTO dump-truck or trailer installation matching its spline shaft and air-shift hardware. The supplied details do not state working pressure, so that specification remains a meaningful system-fit boundary.

Listed on Amazon as: PTO Dump Pump C102 Hydraulic Pump with Air Shift Cylinder

#4 · Best 8-Quart Unit

4. VEVOR 8 Quart Pump

• Weight: 29.1 lb
• Dimensions: 20.08 x 7.28 x 8.27 in
• Material: Steel

Best for: Intermittent-Duty Trailer Lifting.

Why it ranks #4: This 12V double-acting unit offers a practical electric alternative, with a 1.6 kW motor, 16–20 MPa working pressure, and up to 3,200 PSI relief pressure.

Its 8-quart reservoir pairs with a 12V, 1.6 kW motor and double-acting control, powering both lifting and lowering. The key operating boundary is explicit: use the pump for 30 seconds, then allow 270 seconds off, making it a fit for intermittent rather than continuous-duty lifting.

The stated 0.91 GPM flow rate and 16–20 MPa working pressure describe the hydraulic output, while the 8-quart tank supplies the system during trailer operation. Double-acting control powers both directions, so the unit can raise and lower rather than relying on gravity for one movement. Its 30-seconds-on, 270-seconds-off guidance shapes the work cycle; plan loading tasks around those pauses to maintain motor stability.

Skip it if you need prolonged, frequent pump operation; the DC HOUSE 10-quart unit has no such duty-cycle interval listed.

Select the VEVOR for dump-trailer work that can accommodate its stated intermittent cycle and needs powered lifting and lowering. Its 8-quart capacity and 30-second work interval are practical boundaries to consider when planning repeated loads.

Listed on Amazon as: VEVOR 8 Quart Hydraulic Pump DC 12V 1.6KW Double Acting Dump Trailer Pump

#5

5. DC HOUSE 10 Quart Pump

• Weight: 29.5 lb
• Dimensions: 22.1"L x 7.1"W x 7.1"H
• Material: Stainless Steel

Best for: Remote-Controlled Double-Acting Lifts.

Why it ranks #5: Its 12V, 1.6 kW motor and double-acting control suit electric dump applications; both ports are listed at up to 3,200 PSI and a remote is included.

A remote control operates both raise and lower, while the 12V, 1.6 kW unit sends oil through ports A and B at the same pressure. That combination suits dump-trailer owners who want powered, even movement from a double-acting cylinder, with a metal reservoir available in several listed capacities.

The 10-quart metal reservoir balances a substantial oil supply with a defined unit size, while the 12V motor suits a vehicle electrical system. Both ports are rated up to 3200 PSI, and the remote controls raising and lowering, supporting powered movement in both directions. At 22.1 inches long and 29.5 pounds, it needs room and support for installation; choose it when those dimensions and the double-acting setup match the trailer.

Skip it if you need a power unit below 29 pounds; VEVOR’s 8-quart pump weighs 29.1 pounds.

Choose this DC HOUSE unit for a dump-trailer setup needing remote-controlled double-acting operation and a 10-quart metal reservoir. Check the 22.1-inch length, 29.5-pound weight, and port arrangement against your available mounting space and hydraulic circuit.

Listed on Amazon as: DC HOUSE Electric Hydraulic Pump Unit Metal Reservoir for Dump Trailer (Double Acting 10 Quart)

#6 · Largest Reservoir

6. Mixizap 20 Quart Unit

• Weight: 36.8 lb
• Dimensions: 25.98 x 12.2 x 12.99 in
• Material: Metal

Best for: Large-Capacity Double-Acting Power.

Why it ranks #6: A 20-quart metal tank and double-acting 12V setup serve buyers seeking more listed reservoir capacity, with a maximum 3,200 PSI overflow setting.

A 20-quart metal tank is the largest stated reservoir in this group, paired here with a 12V, 1.6 kW motor and double-acting operation. It suits buyers prioritizing reservoir capacity and powered lifting and lowering for dump trailers or trucks.

The 20-quart reservoir offers more listed capacity than the smaller tank options in this roundup, while the 12V DC motor supports vehicle-based installations. Double-acting operation powers both lift and lower movements, and the SAE #6 port connector defines the connection to check against the hydraulic circuit. Its maximum overflow setting is 3200 PSI. At 25.98 inches long and 36.8 pounds, it calls for adequate mounting room and support.

Skip it if you have limited mounting room; VEVOR’s 8-quart unit measures 20.08 inches long and weighs 29.1 pounds.

The Mixizap fits a dump-trailer or truck owner seeking a large reservoir and double-acting control. Its 20-quart capacity comes with a 36.8-pound, nearly 26-inch unit, so confirm available mounting space and SAE #6 connection compatibility.

Listed on Amazon as: 20 Quart Double Acting Hydraulic Power Unit 12V 3200 PSI

#7

7. SHORELEV 15 Quart Unit

• Weight: 36.4 lb
• Dimensions: 11 x 11 x 25.52 in
• Material: Iron

Best for: Large-Tank Single-Acting Lifts.

Why it ranks #7: This 12V single-acting unit has a 15L iron reservoir and a stated 3,000 PSI output, fitting systems designed for powered lifting and single-acting operation.

A 15L iron reservoir gives this 12V single-acting power unit a large listed oil capacity for dump trailers, tow trucks, snow plows, or agricultural equipment. Its 3000 PSI rating supports lifting applications, while the single-acting design defines the direction of powered operation.

The 15L iron tank and stated corrosion resistance suit rugged commercial or industrial settings where reservoir construction matters. A 12V DC supply makes it a vehicle-oriented power unit, and the up-to-3000-PSI rating supports lifting and loading tasks listed for trailers and other equipment. Because this is a single-acting system, buyers should match it to a circuit that needs single-acting operation rather than powered movement in both directions.

Skip it if you need powered lifting and lowering; SHORELEV’s 8L double-acting unit specifies dual-solenoid bidirectional control.

Consider this SHORELEV unit for a vehicle or equipment application needing a 15L iron reservoir and single-acting hydraulic power. Its operating design is the main fit boundary: it is not the choice for powered double-acting movement.

Listed on Amazon as: Hydraulic Power Unit 15 Quart with SAE#6 Connector, 12V DC Hydraulic Power Pump, 15L Single Acting Iron Reservoir, 3000 PSI for Dump Trailers, Tow Trucks, Snow Plows, Agricultural Equipment

#8

8. KTI 6 Quart Pump

• Weight: 38 lb
• Dimensions: 7"W x 8"H
• Material: Poly

Best for: Compact Remote-Controlled Double-Acting.

Why it ranks #8: The 12V double-acting KTI unit includes a remote and a poly reservoir; its listed 6-quart size may suit buyers prioritizing a smaller tank.

A three-button control offers both gravity-down and power-down options on this 12V double-acting KTI pump. With a 6-quart poly reservoir and remote included, it suits dump-trailer users who want control choices and a plastic tank in a compact hydraulic setup.

The 6-quart poly reservoir keeps the listed tank material distinct from metal-reservoir alternatives, while 12V DC operation fits vehicle-based systems. Double-acting performance supports lift and lower functions; the three-button control adds gravity-down and power-down options, giving the operator a choice in lowering workflow. The supplied details list a 2 kW rating and remote, but do not state pressure or flow figures, so those requirements need separate consideration.

Skip it if you require a listed pressure rating; DC HOUSE’s 10-quart unit states up to 3200 PSI at both ports.

This KTI unit suits trailer owners who value a 6-quart poly reservoir and selectable gravity-down or power-down control. Pressure and flow figures are not supplied here, so it may not suit a purchase requiring those ratings upfront.

Listed on Amazon as: KTI 12Vdc Double Acting 6qt Hydraulic Pump for Dump Trailer – Hydraulic Power Unit – Dump Trailer Pump 6 Quart Poly Reservoir with Remote Controller (DC-45597-06)

#9

9. SHORELEV 8L Unit

• Weight: 37.3 lb
• Dimensions: 11.02 x 11.02 x 27.9 in
• Material: PP

Best for: Corrosion-Resistant Mobile Equipment.

Why it ranks #9: This 12V double-acting power unit uses dual solenoids and an 8L plastic reservoir, but its supplied details do not state a flow or pressure rating.

Its 8L plastic reservoir combines with dual solenoids for electrically controlled extension and retraction. This 12V double-acting unit targets mobile or outdoor equipment owners seeking bidirectional operation with a lightweight, corrosion-resistant tank for dump trucks, snow plows, or tow trucks.

The dual-solenoid, four-way valve setup controls movement in both directions, supporting powered extension and retraction with reduced manual effort. An 8L PP reservoir is described as lightweight and corrosion-resistant, useful qualities for mobile and outdoor applications where tank material matters. The unit is listed at 11.02 inches square and 27.9 inches high, so its upright dimensions should be considered when locating it in a vehicle or equipment installation.

Skip it if you have low vertical clearance; VEVOR’s 8-quart unit is listed at 8.27 inches high.

Choose this SHORELEV power unit for mobile or outdoor work needing double-acting control and a corrosion-resistant plastic reservoir. Its nearly 28-inch listed height is a key installation boundary, so account for clearance before selecting a mounting location.

Listed on Amazon as: Hydraulic Motor Dump Trailer Pump, 12V DC Double 4-Way Solenoid Double Acting Hydraulic Power Unit, 8L Plastic Reservoir, for Dump Trucks, Snow Plows, Tow Trucks, and Industrial Machinery

#10

10. ParnicoTech 10 Quart Unit

• Weight: 36.3 lb
• Dimensions: 19.84 x 8.66 x 8.86 in
• Material: Iron

Best for: Remote-Included Metal-Tank Lifting.

Why it ranks #10: It lists a 10-quart reservoir and 3,200 PSI maximum relief pressure, but its feature text conflicts on single-acting versus double-acting operation.

A 2.2 kW, 2600 RPM motor and 10-quart iron reservoir headline this 12V power unit, with a remote switch included. The title describes a double-acting pump, but the supplied feature text also calls its mechanism single-acting, so buyers should resolve that operating detail before purchase.

The listed 3200 PSI maximum relief pressure and 10-quart tank speak to pressure protection and reservoir capacity for lifting tasks. A 12V DC supply and included dump-trailer remote switch support a vehicle-oriented control setup, while the iron tank specifies the reservoir material. However, the title says double acting and the feature description says single acting; that conflict affects whether powered lowering is supported, so confirm the intended circuit operation from reliable product information.

Skip it if you cannot proceed without confirmed double-acting operation; DC HOUSE’s listing specifies powered raise and lower control.

This unit may suit a buyer prioritizing a 10-quart iron tank, remote switch, and stated relief-pressure rating. The single- versus double-acting conflict is a decisive boundary; establish the operating configuration before matching it to a trailer.

Listed on Amazon as: ParnicoTech 10 Quart Hydraulic Power Unit, Double Acting Dump Trailer Pump 12V DC, 3200 PSI Max Relief Pressure, Power Unit Metal Reservoir for Dump Trailer Car Lifting, SAE # 6 Port, Steel