Best Dirt Bike Tire Studs for Ice and Snow

Best Dirt Bike Tire Studs

A strong dirt bike tire stud choice matches the tire’s knobs and riding conditions, with a secure fit and a tip suited to ice or snow. For riders focused on ice racing, Kold Kutter Racing Traction Screws stand out with a 3/8-inch size and an AMA-legal racing focus. This lineup also includes screw-in carbide-tipped studs, front- and rear-tire-specific Grip Studs, and options in sizes such as 12mm and 24.5mm.

Those differences matter: screw dimensions and intended placement are not interchangeable, and a pack’s count does not establish how many studs a particular tire needs. Compare the listed size and construction with your tire before buying, and confirm that installation will not reach or damage the inner tube.

Kold Kutter Racing Traction Screws are the leading choice for dirt bike ice racing because the listing identifies racing dirt bikes, specifies a 3/8-inch #8 screw, and describes the V-cut head as AMA-legal. Their carbon-steel construction and pack of 250 suit buyers seeking a dedicated traction-screw format. For general slick-surface riding rather than racing, consider Grip Studs 1800 Rear instead: it is described for dirt bike tire lugs, uses a solid tungsten-carbide shaft, and includes an installation tool.

Check tire and knob compatibility before choosing either.

Our Top Picks

Kold Kutter Traction ScrewsBest Overall

Kold Kutter Traction Screws

Made for racing dirt bikes, these carbon-steel #8 screws measure 3/8 inch and use a V-cut head; the listing identifies them as AMA-legal.

View on Amazon
Grip Studs 1800 RearBest Rear-Tire Set

Grip Studs 1800 Rear

The listing specifically describes use in dirt bike tire lugs and rear tires; its solid tungsten-carbide shaft and included installation tool add useful specifics.

View on Amazon
Grip Studs 1740 FrontBest Front-Tire Set

Grip Studs 1740 Front

This 150-pack is identified for front tires, lists a 5.4mm compatible groove diameter, and includes an installation tool for screw-in mounting.

View on Amazon

Compare Dirt Bike Tire Stud Options

#ProductCompatible Groove DiameterSize NameWeightBuy
10.38 in3/8" Screw | 18 TPI—View on Amazon
2
Grip Studs 1800 Rear2. Grip Studs 1800 RearBest Rear-Tire Set
———View on Amazon
3
Grip Studs 1740 Front3. Grip Studs 1740 FrontBest Front-Tire Set
5.4 millimeters1740—View on Amazon
4
Marrkey 24.5mm Studs4. Marrkey 24.5mm StudsCarbide-Tipped Option
——1.08 lbView on Amazon
5——6.4 ozView on Amazon
6
Lakapre 3/8-Inch Screws6. Lakapre 3/8-Inch ScrewsV-cut winter traction screws
0.38 inTraction Screws-3/8"0.5 kgView on Amazon
7
iGrip 11mm Racing Studs7. iGrip 11mm Racing StudsShouldered racing traction screws
——8.5 ozView on Amazon
8
Aulpq 1/2-Inch Studs8. Aulpq 1/2-Inch StudsHalf-inch winter screw studs
0.5 in1/2" 250 Pack (#8)—View on Amazon
9
JEEKVISEN 9mm Studs9. JEEKVISEN 9mm StudsTool-included 9 mm carbide studs
9 millimeters1800 (9 x 23.3mm)0.49 kgView on Amazon
10
Marrkey 7 × 9.9mm Studs10. Marrkey 7 × 9.9mm StudsShort-stud drill-install kit
——0.18 kgView on Amazon

Detailed Reviews: Best Dirt Bike Tire Studs

Kold Kutter Traction Screws

#1 · Best Overall

1. Kold Kutter Traction Screws

  • Compatible Groove Diameter: 0.38 in
  • Size Name: 3/8" Screw | 18 TPI

Best for: AMA ice-racing screw pick.

Why it ranks #1: Made for racing dirt bikes, these carbon-steel #8 screws measure 3/8 inch and use a V-cut head; the listing identifies them as AMA-legal.

The AMA-legal V-cut head is the defining feature of Kold Kutter’s #8, 3/8-inch traction screws, giving each screw two bladed surfaces for bite on ice. A 250-pack suits riders preparing a dirt bike, ATV, motorcycle, or snowmobile track for winter conditions.

Carbon-steel construction and a V point make these screws a focused option for ice and snow, while the V-cut head supplies two biting edges at the tire surface. The 3/8-inch thread and 0.38-inch compatible groove diameter identify the sizing to match when planning an installation. Their hex head also gives a recognizable drive profile for installation. With 250 screws in the pack, buyers can plan a larger stud layout rather than a small repair batch.

Pros
  • AMA-legal for ice racing, according to the product listing
  • V-cut head has two bladed surfaces
  • Carbon-steel construction
  • 250 screws per pack
Cons
  • The 3/8-inch size requires a tire setup that accepts that groove diameter.

Skip it if you need tungsten-carbide-tipped studs with an included installation tool; Grip Studs 1800 lists both.

Ice racers and winter off-road riders who want a 250-count supply of AMA-legal V-cut screws should consider this set. Match its 3/8-inch sizing to the intended tire before installation; it is not a universal stud size.

Full product details
BrandKold Kutter Racing
ColorBlack
Compatible Groove Diameter0.38 inches
Fastener SizeNo. 8
Head StyleHex
ManufacturerKold Kutter Racing
MaterialCarbon Steel
ModelKK038-8-250
Point StyleV Point
Screw Head StyleHex
Screw Point StyleV Point
Size Name3/8" Screw | 18 TPI
Thread Size3/8"-8
Thread StyleRight Hand

Listed on Amazon as: Kold Kutter AMA-Approved Traction Screws 250 Pack (#8) 3/8" – Winter Ice & Snow Tire Heavy Duty Studs Spikes for Racing Dirt Bikes, ATVs, Motorcycles, and Snowmobiles Tracks

View on Amazon
Grip Studs 1800 Rear

#2 · Best Rear-Tire Set

2. Grip Studs 1800 Rear

Best for: Rear-tire tungsten-carbide studs.

Why it ranks #2: The listing specifically describes use in dirt bike tire lugs and rear tires; its solid tungsten-carbide shaft and included installation tool add useful specifics.

Solid tungsten-carbide shafts give the Grip Studs 1800 rear-tire set its central distinction, with the listing describing a rust-resistant material intended to maximize grip on mud, snow, ice, downed trees, and slippery roots. The pack contains 150 screw-in studs and an installation tool.

Grip Studs specifies patented wide-auger threads to increase retention and prevent further movement into or out of the tire, helping address stud stability after fitting. Its rear-tire positioning gives the set a clear role for riders adding traction at the back, rather than treating it as a front-specific option. The included installation tool supports the screw-in workflow, and the 150-stud count provides a defined quantity for planning. The listing also gives tire size 9/0R18.

Pros
  • Solid tungsten-carbide shafts
  • Wide-auger threads intended to improve retention
  • 150 studs included
  • Installation tool included
Cons
  • This listing identifies the set specifically for a rear tire.

Skip it if you want a front-tire-specific Grip Studs set; Grip Studs 1740 is listed for the front tire.

Rear-wheel riders seeking screw-in traction for slick surfaces can consider this 150-piece set, particularly where carbide construction and wide-auger retention matter. Its stated rear-tire role and 9/0R18 size are relevant boundaries when selecting it.

Full product details
BrandGrip Studs
Load Capacity2000 pounds
ManufacturerGrip Studs Best Grip Italy
Part Number1800
Manufacturer Warranty DescriptionAll Grip Studs products go through an extensive QA process before they are shipped – Grip Studs guarantees that all steel boot, tire and track studs are free of defects. We will replace defective studs up to one year after purchase. If a defect is discovered, Grip Studs will provide a return shippin
Model Number1800
Size150
Vehicle Tire ISO Metric Size Description9/0R18

Listed on Amazon as: 1800 – Authentic GRIPSTUDS Motorcycle Tire Stud, Pack of 150 Solid Tungsten Carbide Tipped Screw In Studs for Improved Traction For The Rear Tire – Includes Installation Tool

View on Amazon
Grip Studs 1740 Front

#3 · Best Front-Tire Set

3. Grip Studs 1740 Front

  • Compatible Groove Diameter: 5.4 millimeters
  • Size Name: 1740

Best for: Front-tire carbide traction set.

Why it ranks #3: This 150-pack is identified for front tires, lists a 5.4mm compatible groove diameter, and includes an installation tool for screw-in mounting.

Grip Studs identifies this 150-piece 1740 set for the front tire, making its intended wheel position the key distinction. Its solid tungsten-carbide construction and included installation tool support a screw-in traction setup for dirt bike, ATV, UTV, or fat-bike tires on slick surfaces.

The listing gives a 5.4-millimeter compatible groove diameter, a useful sizing reference when planning which tire lugs to stud. Solid tungsten-carbide material and wide-auger threads connect durability and retention to the practical job of keeping screw-in traction hardware in place. The included installation tool helps with fitting, while the explicitly front-tire designation clarifies its role in a two-wheel setup. Grip Studs also states that stud performance often outlasts the rubber they are screwed into.

Pros
  • Specified for front-tire use
  • Solid tungsten-carbide construction
  • 5.4-millimeter compatible groove diameter
  • Installation tool included
Cons
  • Its listed 5.4-millimeter groove diameter requires a matching tire setup.

Skip it if you need a rear-tire-specific set with 150 studs; Grip Studs 1800 is listed for rear tires.

Front-wheel riders seeking screw-in traction for slick terrain can consider the Grip Studs 1740 set, especially when its tool and carbide construction suit their installation plan. Its front-tire designation and 5.4-millimeter groove diameter define the fit.

Full product details
BrandGrip Studs
Compatible Groove Diameter5.4 millimeters
Fastener MaterialTungsten Carbide
Hardware MaterialTungsten Carbide
Included ComponentsInstallation Tool
ManufacturerGrip Studs Best Grip Italy
Model1740
Size1740
Size Name1740
Warranty DescriptionAll Grip Studs products go through an extensive quality control process before they are shipped – Grip Studs guarantees that all steel boot, tire and track studs are free of defects. We will replace defective studs up to one year after purchase. If a defect is discovered, Grip Studs will provide a r

Listed on Amazon as: 1740-5.4mm Prominence GRIPSTUDS Motorcycle Tire Stud, Pack of 150 Solid Tungsten Carbide Tipped Screw In Studs for Improved Traction For The Front Tire – Includes Installation Tool

View on Amazon
Marrkey 24.5mm Studs

#4 · Carbide-Tipped Option

4. Marrkey 24.5mm Studs

  • Weight: 1.08 lb

Best for: Carbide-tip multi-tire kit.

Why it ranks #4: The listing names dirt bikes and motorcycles, with a 24.5mm size, tungsten-carbide performance tip, wide-auger threads, and a supplied installation key.

Tungsten-carbide tips and wide-auger threads give Marrkey’s 100 screw-in studs their defining combination: a hard performance tip paired with threads intended to hold in place. The set includes an installation key and is listed for dirt bikes, motorcycles, ATVs, UTVs, dual-sport bikes, sport bikes, tires, tracks, and soles.

The supplied installation key supports a simpler setup workflow than sourcing a separate key, while the studs’ notched shape is specified to help with installation and removal. Wide-auger threads are intended to resist backing out, an important consideration when fitting screw-in traction hardware. Marrkey lists a wide selection of sizes for most tires and soles, but the supplied listing does not identify this pack’s stud length; check the product’s sizing information against the intended application before choosing it.

Pros
  • Tungsten-carbide performance tip and core
  • Wide-auger threads intended to resist backing out
  • Notched for installation and removal
  • Installation key included
Cons
  • The supplied listing does not state this pack’s stud length.

Skip it if you need a listed 11 mm shouldered racing stud; iGRIP SS-11200R specifies that size and a shoulder.

Choose these for a buyer seeking carbide-tipped screw-in traction across several listed vehicle and footwear types, with a key included. The missing length in the supplied details makes checking the exact size especially important before planning a tire layout.

Full product details
BrandMarrkey
Item Weight‎1.08 pounds
Item model number‎MS180R-100
Manufacturer‎Marrkey
Part Number‎MS180R-100
Package Dimensions‎5.51 x 4.76 x 1.3 inches

Listed on Amazon as: Screw in Tire Stud,Marrkey Steel Body Carbide Tips [Security Anti-Skid] Tire Spikes for Dirt Bike Motorcycle ATV UTV ADV/Dual Sport,and Sport Bike 24.5mm – Pack of 100

View on Amazon
aupartuds 12mm Studs

#5 · Removable Studs

5. aupartuds 12mm Studs

  • Weight: 6.4 oz

Best for: Removable winter tire studs.

Why it ranks #5: These 12mm studs explicitly list dirt bikes, combine tungsten-carbide pins with carbon-steel bodies, and are described as removable after winter.

The ability to remove these 12 mm studs after winter is the defining practical feature of aupartuds’ 200-piece set. Each stud combines a tungsten-carbide pin with a carbon-steel body and galvanized surface, and the listing covers dirt bikes, motorcycles, ATVs, tractors, snowblowers, and more.

The listed 4 mm diameter and 12 mm height describe the stud’s dimensions, while its tungsten-carbide pin and carbon-steel body specify the main materials. The product instructions describe drilling down from the center of a chosen knob and screwing from inside to outside, so fitting involves tire preparation rather than simply turning a stud in from the tread. Because the studs can be removed after winter, the set supports seasonal use; follow the stated perpendicular installation guidance.

Pros
  • Removable after winter
  • Tungsten-carbide pin
  • Carbon-steel body with galvanized surface
  • 200 studs included
Cons
  • Installation requires drilling into the tire knobs and screwing from inside to outside.

Skip it if you want an installation tool included with the set; JEEKVISEN lists one with its 100 studs.

Choose these for a seasonal tire setup where removing studs after winter matters and the listed 4-by-12 mm dimensions suit the plan. Buyers should be comfortable with the described drilling and inside-to-outside installation workflow.

Full product details
Brandaupartuds
Item Weight‎6.4 ounces
Manufacturer‎aupartuds
Part Number‎AU412
Package Dimensions‎4.96 x 3.94 x 0.67 inches

Listed on Amazon as: 12mm Tire Studs for ATV, 200pcs Carbide Screw Anti-Slip Studs for SUV,Motorbike,Motorcycle,Dirt Bike,Tractor,Snowblower Reusable Anti-ice Snow Spikes with Installation Sleeve

View on Amazon
Lakapre 3/8-Inch Screws

#6

6. Lakapre 3/8-Inch Screws

  • Compatible Groove Diameter: 0.38 in
  • Size Name: Traction Screws-3/8"
  • Weight: 0.5 kg

Best for: V-cut winter traction screws.

Why it ranks #6: These carbon-steel #8 traction screws share the 3/8-inch format and V-cut head of an ice-focused design, though the supplied listing does not specifically name dirt bikes.

A V-cut head is the key feature of Lakapre’s #8, 3/8-inch traction screws, with supplied product facts stating that the edges dig into ice and snow. Locking teeth beneath the head are also specified to help keep the studs in place during high-speed races and rough use.

The carbon-steel screws pair a V-cut point and head with locking teeth beneath the head, connecting the cutting profile to ice grip and the under-head feature to retention. Their #8 thread and 0.38-inch compatible groove diameter provide sizing details for planning installation in a matching tire. Listed dimensions are 0.39 by 0.39 by 0.24 inches. The pack is identified as traction screws, but the supplied information does not give a quantity, so plan around that limitation.

Pros
  • V-cut head and point
  • Locking teeth beneath the head
  • Carbon-steel construction
  • #8 thread with 0.38-inch compatible groove diameter
Cons
  • The supplied specifications do not state how many screws are included.

Skip it if you need a stated 250-count pack; Kold Kutter Racing KK038-8-250 lists 250 screws.

Lakapre suits winter riders who want V-cut screws with specified locking teeth for ice, snow, or rough use. Check the stated #8 and 0.38-inch sizing against the tire, and account for the unstated pack quantity when planning coverage.

Full product details
BrandLakapre
Colorblack
Compatible Groove Diameter0.38 inches
Fastener Size1/8 in x 3/8 in #8
Head StyleV-Cut
Included ComponentsTraction Screws
Item Dimensions0.39 x 0.39 x 0.24 inches
Item Weight0.5 kg
Dimensions0.39 x 0.39 x 0.24 inches
ManufacturerLakapre
MaterialCarbon Steel
ModelTraction Screws-3/8"
Screw Head StyleV-Cut
Screw Point StyleV-Cut Point
Size NameTraction Screws-3/8"
Thread Size#8
Thread StyleRight Hand
Warranty Descriptionno

Listed on Amazon as: Winter Ice & Snow Tire Heavy Duty Studs Spikes(#8) 3/8" Traction Screws

View on Amazon
iGrip 11mm Racing Studs

#7

7. iGrip 11mm Racing Studs

  • Weight: 8.5 oz

Best for: Shouldered racing traction screws.

Why it ranks #7: The 11mm shouldered racing studs have oversized tungsten-carbide tips and include a tool and instructions, but the listed applications do not specifically identify dirt bikes.

A shoulder that prevents over-penetration is the defining feature of iGRIP’s 11 mm racing studs. Their oversized tungsten-carbide tips are specified for aggressive traction, while hot-dipped galvanized steel supplies corrosion resistance for use in extreme environments.

The shoulder provides a stated safeguard against driving the stud too far into a tire, a useful consideration during installation. An oversized tungsten-carbide tip supplies the listed racing-grade traction profile, while hot-dipped galvanized steel is specified for corrosion resistance. The studs are designed for easy installation and removal, with a tool and instructions included. Their listed applications extend to tracked and pneumatic machinery, including vehicles up to 100,000 pounds, so buyers should match the application and 11 mm size to their setup.

Pros
  • Shoulder intended to prevent over-penetration
  • Oversized tungsten-carbide tip
  • Hot-dipped galvanized steel
  • Tool and instructions included
Cons
  • The listed 11 mm size may not suit tire setups requiring shorter studs.

Skip it if you need a 250-piece pack of AMA-legal 3/8-inch screws; Kold Kutter Racing KK038-8-250 lists both.

Racers seeking an 11 mm shouldered stud with a carbide tip and supplied installation tool should consider this set. Its machinery applications and over-penetration-limiting shoulder suit a distinct use case; verify the size against the intended tire.

Full product details
BrandiGRIP Screw studs
Item Weight‎8.5 ounces
Item model number‎SS-11200R
Manufacturer‎iGrip Screw Studs
Part Number‎SS-11200R
Model‎SS-11200R
Dimensions‎6.7 x 4.5 x 1.2 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: iGrip Shouldered Racing Tire Studs 11mm, Box of 200 Screws Pack

View on Amazon
Aulpq 1/2-Inch Studs

#8

8. Aulpq 1/2-Inch Studs

  • Compatible Groove Diameter: 0.5 in
  • Size Name: 1/2" 250 Pack (#8)

Best for: Half-inch winter screw studs.

Why it ranks #8: The listing includes racing dirt bikes and a 250-pack, but its 1/2-inch size differs from the more specifically presented dirt-bike options in this lineup.

The 1/2-inch size distinguishes Aulpq’s #8 winter traction screws from the smaller 3/8-inch options in this roundup. Their V-shaped cutting heads are specified to dig into ice and snow, while vibration-lock teeth beneath each head are intended to help hold the screws tightly against the tire.

The V-shaped head has two cutting edges, connecting its shape to the listed goal of digging into slippery surfaces. Under-head vibration-lock teeth address retention by helping the screw fit tightly onto the tire. A 250-pack gives winter riders a stated quantity for planning a stud layout across motorcycles, snowmobiles, dirt bikes, or ATVs. The listed compatible groove diameter is 0.5 inches, so that measurement is a key fit consideration when choosing a tire and installation plan.

Pros
  • V-shaped head with two cutting edges
  • Vibration-lock teeth beneath the head
  • 250 screws per pack
  • Listed for motorcycles, snowmobiles, dirt bikes, and ATVs
Cons
  • The 0.5-inch compatible groove diameter limits fit to matching tire setups.

Skip it if you need an AMA-legal 3/8-inch screw; Kold Kutter Racing KK038-8-250 lists AMA ice-racing legality.

This pack fits winter riders who need a stated 250 screws and a 1/2-inch option for ice or snow use. Check the compatible groove diameter before installation, since its size differs from the listed 3/8-inch choices.

Full product details
BrandAulpq
Compatible Groove Diameter0.5 inches
Fastener Size1/2" x #8
Head StyleV-shaped
Included ComponentsTire Studs
ManufacturerAulpq
ModelTire Studs
Point StyleDiamond Point
Screw Head StyleV-shaped
Screw Point StyleDiamond Point
Size Name1/2" 250 Pack (#8)
Thread Size1/2"
Thread StyleRight Hand

Listed on Amazon as: 1/2" 250 Pack (#8)- Winter Ice & Snow Tire Heavy Duty Studs Spikes for Motorcycles, Snowmobiles Tracks, Racing Dirt Bikes, and ATVs

View on Amazon
JEEKVISEN 9mm Studs

#9

9. JEEKVISEN 9mm Studs

  • Compatible Groove Diameter: 9 millimeters
  • Size Name: 1800 (9 x 23.3mm)
  • Weight: 0.49 kg

Best for: Tool-included 9 mm carbide studs.

Why it ranks #9: These 9mm tungsten-carbide-tipped studs include an installation tool and list motorcycles and ATVs, but do not specifically name dirt bikes.

A supplied installation tool and notched stud body give JEEKVISEN’s 100-piece carbide set a practical setup advantage. The 9 mm studs have a tungsten-carbide tip and core, wide-auger threads for metal-to-rubber retention, and a flat head with a Type A point.

The included tool and notched shape support installation and removal, while wide-auger threads are specified to help the studs retain their position in rubber. A brazed carbide tip joins the hard tip to the steel body, distinguishing its construction from a cemented tip. The listed size is 9 by 23.3 mm, with a 9 mm compatible groove diameter. Broad applications include motorcycles, ATVs, mountain and fat bikes, scooters, vehicles, and footwear, so matching the dimensions remains essential.

Pros
  • 100 studs and an installation tool included
  • Tungsten-carbide tip and core
  • Brazed tip-to-steel-body construction
  • Notched for installation and removal
Cons
  • The 9-by-23.3 mm size may not suit tires requiring shorter studs.

Skip it if you need a 7-by-9.9 mm stud for a shallower tread; Marrkey ms110 is listed at that size.

This set suits buyers seeking a tool-included carbide option across several listed vehicle and footwear applications. Its 9-by-23.3 mm dimensions and 9 mm groove diameter are important fit boundaries when choosing studs for dirt-bike tires.

Full product details
BrandJEEKVISEN
ColorSilver
Compatible Groove Diameter9 millimeters
Fastener Size9 x 23.3mm
Head StyleFlat
Included Components100pcs Carbide Screw Tire Studs, 1pcs Installation Tool
Item Weight0.49 kg
ManufacturerJEEKVISEN
Point StyleType A Point
Screw Head StyleFlat
Screw Point StyleType A Point
Size Name1800 (9 x 23.3mm)
Thread Size9 millimeters
Thread StyleRight Hand coarse partially threaded

Listed on Amazon as: Tire Studs, Screw Snow Carbide Spikes, Wheel Tyres Studs for Wading & Running Shoes, Mountain & Fat Bikes, Scooters, Autos, Pickups, ATV/UTVs, Sport Motorcycles, Loaders, Tractors

View on Amazon
Marrkey 7 × 9.9mm Studs

#10

10. Marrkey 7 × 9.9mm Studs

  • Weight: 0.18 kg

Best for: Short-stud drill-install kit.

Why it ranks #10: The 7 × 9.9mm carbide and carbon-steel studs are presented for bicycles, fat bikes, and other uses, without a specific dirt-bike application.

Marrkey’s 7-by-9.9 mm stud size is the main differentiator for buyers seeking a shorter screw than the 11 mm iGRIP option. Carbon steel and cemented carbide form the stud, and a supplied metal sleeve works with a drill for installation; the drill itself is not included.

The short listed dimensions give buyers a concrete size to compare with tire-tread depth, and Marrkey specifically advises choosing studs according to that depth. Installation uses a drill and the provided metal sleeve, so buyers need their own drill and should plan for a tool-based fitting process. The carbon-steel and cemented-carbide construction supplies the listed materials, while the 100-piece pack is intended for applications including bicycles, fat bikes, racing cars, snowblowers, scooters, and footwear.

Pros
  • 7-by-9.9 mm stud size
  • Carbon-steel and cemented-carbide construction
  • Metal sleeve included for drill installation
  • 100 studs per pack
Cons
  • A drill is required and is not included.

Skip it if you need a kit with its installation tool included; Grip Studs 1740 lists one with its front-tire set.

Buyers who want short studs and already have a drill can consider this Marrkey pack for a listed bicycle, fat-bike, or other compatible application. Match the 9.9 mm length to tread depth before installation.

Full product details
BrandMarrkey
Compatible with Vehicle TypeBicycle, Fat Bikes, Racing Car, Snow Blower
Included ComponentsStainless Steel
Item Weight0.18 kg
ManufacturerMarrkey
Part Numberms110
Manufacturer Warranty Description1 Year Manufacturer
MaterialCarbon steel, Cemented Carbide
Model Numberms110 tire studs

Listed on Amazon as: Tires Studs/Screw Snow Carbide Spikes/Wheel Tyres Studs for Racing car,Bicycle,Bike,Fat Bikes, Scooters Tires,Running Shoes Boots in Winter 7 9.9mm 100PCS

View on Amazon

Avoiding tube damage during stud installation

The main installation risk is allowing a screw or drill to reach the tire’s inner tube. This matters especially with screw-in studs: aupartuds’ instructions describe drilling from the center of a chosen knob, while Marrkey says to select a size according to tire-thread depth. Neither detail establishes that every tire can accept every stud.

Before installation, inspect the tire construction and available knob depth, and verify the intended screw length against the tire maker’s guidance. Keep the stud perpendicular to the tread where applicable; the aupartuds instructions warn that an angled stud can stick out on the tire’s inside.

A supplied tool makes fitting easier, but it does not confirm compatibility or prevent punctures by itself. If the tire has insufficient rubber depth or its construction is unclear, do not assume a listed vehicle fit guarantees safe installation.

Why screw dimensions and placement matter

A stud’s stated size and intended tire position are not interchangeable details. This selection ranges from 3/8-inch #8 traction screws to 11mm, 12mm, 24.5mm, and 9 × 23.3mm formats; those labels describe different products and may refer to different measurement conventions. Compare the exact product dimensions with the tire’s knob depth and installation method rather than choosing by pack count or a broad vehicle-compatibility list.

Placement also varies: Grip Studs 1800 is presented for a rear tire, while Grip Studs 1740 is identified for a front tire. Kold Kutter’s 3/8-inch screws are framed around AMA ice racing, a narrower use case than general winter traction.

A poor fit can leave a stud protruding too far, failing to hold, or interfering with the tire. Confirm dimensions and intended placement before committing to a pattern.

How to Choose Dirt Bike Tire Studs

Stud dimensions and tire fit

Start by matching the listed stud dimensions to the tire knob depth and the maker’s installation guidance. This lineup includes 3/8-inch #8 screws from Kold Kutter Racing and Lakapre, a 1/2-inch #8 option from Aulpq, 11mm iGrip studs, 12mm aupartuds studs, and a 24.5mm Marrkey model. These product labels should not be treated as equivalent measurements; check what each dimension describes and whether the stud suits the tire.

Riders seeking a racing-oriented 3/8-inch screw can consider Kold Kutter Racing Traction Screws, while those whose tire and installation plan call for a listed millimeter size can compare the corresponding alternatives. Tire compatibility takes priority over selecting a larger or longer-looking stud.

Tip and body construction

Choose construction according to the traction conditions and the product’s stated use, rather than assuming all metal studs perform alike. Kold Kutter Racing Traction Screws and Lakapre use carbon steel and V-cut heads; several other products specify tungsten-carbide tips or pins, including Grip Studs 1800 Rear, Grip Studs 1740 Front, and Marrkey 24.5mm Studs. Aupartuds 12mm Studs specify tungsten-carbide pins with carbon-steel bodies, while iGrip 11mm Racing Studs list hot-dipped galvanized steel and oversized carbide tips.

Buyers prioritizing a racing-focused screw can favor the V-cut options; riders looking for a product explicitly listing carbide components can compare the carbide-tipped choices. These specifications describe materials and design, not independently verified grip or lifespan.

Placement, quantity, and installation aids

Check whether a product is intended for the tire position you plan to stud, then consider the pack and supplied installation equipment. Grip Studs 1800 Rear is explicitly labeled for rear tires, while Grip Studs 1740 Front is labeled for front tires; both list 150 studs, and the front model includes an installation tool. Kold Kutter Racing Traction Screws come in a 250-pack, while Marrkey 24.5mm Studs offer 100 and aupartuds 12mm Studs offer 200.

JEEKVISEN 9mm Studs also include an installation tool. A larger pack may suit a buyer planning a broader installation, while a position-specific product can simplify narrowing the choice.

The listings do not establish how many studs a particular tire requires, so determine your pattern and quantity before purchasing.

Which Dirt Bike Tire Studs Should You Choose?

For ice racing on a dirt bike, choose Kold Kutter Traction Screws: the listing specifies a 3/8-inch #8 format, V-cut head, and AMA-legal racing use. For a screw-in option identified for rear dirt bike tire lugs, Grip Studs 1800 Rear adds a solid tungsten-carbide shaft and installation tool. Choose Grip Studs 1740 Front when you specifically want a front-tire product with a listed 5.4mm groove diameter.

For a 24.5mm carbide-tipped option, consider Marrkey 24.5mm Studs; for removable 12mm studs, compare aupartuds 12mm Studs. Before buying, verify the size against your tire and installation method.

Do not infer safe fit, required quantity, or a suitable stud pattern from broad vehicle-compatibility claims alone.

Frequently Asked Questions

How many studs should I install in each dirt bike tire, and where should I place them?

There is no universally safe quantity or placement pattern established by these listings. Tire size, knob shape, stud dimensions, and riding conditions matter. Check the tire and stud compatibility, then follow the stud maker’s installation guidance; do not assume that pack size or broad vehicle compatibility tells you how many to fit.

Can screw-in tire studs puncture an inner tube or damage a tire carcass?

Yes, an incorrectly sized or installed screw-in stud could reach an inner tube or harm the tire carcass. The supplied product information does not establish safe penetration depth for every tire. Verify the stud length and tire construction, follow the manufacturer’s installation instructions, and avoid installation if you cannot confirm adequate clearance.

How should I remove, inspect, and maintain dirt bike tire studs after winter riding?

Use the removal and maintenance instructions provided for the specific stud and tire; the listings do not give a universal procedure. After winter riding, check for loose, missing, bent, or damaged studs and inspect the surrounding knobs and tire. Remove studs only as directed, and replace or retire damaged components before riding.

Which listed studs are specifically identified for front or rear dirt bike tires?

Grip Studs 1740 is identified for a motorcycle front tire and lists a 5.4mm groove diameter; Grip Studs 1800 is identified for a rear tire and for dirt bike tire lugs. These descriptions do not guarantee fit on your particular tire, so check dimensions and knob compatibility before choosing either.

What should I check before choosing a stud size or installation method?

Compare the listed dimensions and stud type with your tire, knobs, and intended installation method. The products include screw-in options and removable 12mm studs, but broad vehicle-compatibility claims do not confirm fit. Check the manufacturer’s guidance and confirm the tire can accept the stud without unsafe penetration or damage.

Final Words

For dirt bike ice racing, the Kold Kutter listing is the clearest match: it specifies a 3/8-inch #8 screw, an AMA-legal V-cut head, and racing dirt bike use. For general slick-surface riding, consider Grip Studs 1800 Rear for its dirt-bike-lug description, carbide shaft, and included tool. Choose the front-specific 1740 only when that application fits.

Confirm tire and knob compatibility before installing any option.

Leave a Reply

Your email address will not be published. Required fields are marked *