Best Dc Motor For Electric Bike: Compare 10 Motor Options

Best Dc Motor For Electric Bike

A strong electric-bike motor choice delivers power and speed that match your battery, drivetrain, and load; riders seeking smoother starts or low-speed pulling should begin with a gear-reduction motor. This roundup compares ten options, including 12V and 36V geared brushed motors, standalone high-speed motors, and brushless kits rated from 48V to 72V. The most directly bike-oriented choices include a 36V 500W geared motor and a 12V 350W geared motor, while several higher-output options are aimed at broader DIY uses such as scooters and go-karts.

Rated voltage, motor type, speed, and included controller or throttle are not interchangeable details. Check the product’s fit against your battery and existing drive hardware before choosing; the listed figures alone do not confirm installation compatibility.

The WETUSSEX MY1018E-D is the strongest overall match for a typical electric-bike conversion because it combines a stated 36V supply, 500W output, and gear reduction intended to support smoother starts and low-speed riding. Its 1700RPM rating and stated load capacity of up to 440.9 lb add useful context for buyers prioritizing low-end pulling over a high-speed motor’s faster output. Confirm mounting, gearing, controller, and battery compatibility before ordering, since the listing does not establish that it fits every bike.

Our Top Picks

WETUSSEX MY1018E-DBest Overall

WETUSSEX MY1018E-D

Its 36V, 500W gear-reduction design is explicitly intended for electric bicycles, with 1700RPM operation and stated support for loads up to 440.9 lb.

View on Amazon
HIFMGHE MY1018E-DBest Specified Torque

HIFMGHE MY1018E-D

This 36V 500W geared motor lists 1.98Nm torque, 1700RPM, and up to 440.9 lb capacity, with IP44 protection also stated.

View on Amazon
LNUJIUN 600W Reduction MotorLowest Reduction Speed

LNUJIUN 600W Reduction Motor

Its 36V, 600W gear-reduction unit is rated at 450r/min with a 1:6.67 reduction ratio, fitting buyers who prioritize slower output.

View on Amazon

Compare the Motors and Kits

#ProductVoltageWattageWeightBuy
1———View on Amazon
2
HIFMGHE MY1018E-D2. HIFMGHE MY1018E-DBest Specified Torque
36 V500 W—View on Amazon
3
LNUJIUN 600W Reduction Motor3. LNUJIUN 600W Reduction MotorLowest Reduction Speed
36 V DC600 W11 lbView on Amazon
4
WETUSSEX MY1016Z4. WETUSSEX MY1016Z12V Geared Option
———View on Amazon
5
Unndysrt 48V Kit5. Unndysrt 48V KitBest Brushed Kit
48 V——View on Amazon
6
LIAPDG 2000W Kit6. LIAPDG 2000W Kit48V brushless conversion kits
48 V2000 W13.6 lbView on Amazon
7
Kunray BY1020 Kit7. Kunray BY1020 Kit72V high-output DIY builders
72 V—8 kgView on Amazon
8
Vevitts YZ0118. Vevitts YZ01124V Razor replacement builds
24 V DC350 W-hours4.5 lbView on Amazon
9
L-faster MY10169. L-faster MY1016Small-wheel scooter replacements
——2.61 kgView on Amazon
10
MOTOBERRY MY102010. MOTOBERRY MY102060V brushless mid-drive builders
60 V2000 W4.6 kgView on Amazon

Detailed Reviews: Best Dc Motor For Electric Bike

WETUSSEX MY1018E-D

#1 · Best Overall

1. WETUSSEX MY1018E-D

Best for: Low-speed loaded-bike riders.

Why it ranks #1: Its 36V, 500W gear-reduction design is explicitly intended for electric bicycles, with 1700RPM operation and stated support for loads up to 440.9 lb.

Gear reduction turns this 36V, 500W brushed motor’s 1700RPM output into lower-speed drive with greater low-end torque, supporting smoother starts and low-speed riding. Its stated load capacity of up to 440.9 pounds makes it a candidate for e-bike builds where carrying a heavier load matters more than high-speed motor output.

The gear transmission reduces motor speed, which the listing connects to smoother starts and low-speed riding; that can suit stop-and-go use better than a high-speed motor. Its 500W rating and stated 440.9-pound load capacity support choosing it for a heavier-duty bicycle or scooter project. The 36V specification gives a clear electrical requirement for planning the build, while the brushed design identifies the motor type to account for when selecting compatible controls and installation components.

Pros
  • Gear reduction supports smooth starts and low-speed riding
  • 500W brushed motor rated at 36V
  • 1700RPM motor speed
  • Listed load capacity up to 440.9 pounds
Cons
  • Brushed motor rather than a brushless design.

Skip it if you need a 60V brushless mid-drive; the MOTOBERRY MY1020 is listed for that setup.

Choose it for a 36V e-bike or scooter build that prioritizes controlled low-speed riding and substantial stated load capacity. Check that the project’s electrical system and mounting arrangement suit this gear-reduction motor.

Full product details
BrandWETUSSEX
ManufacturerWETUSSEX
ModelMY1018E-D

Listed on Amazon as: Gear Reduction Electric Motor MY1018E-D, 36V 500W 1700RPM Electric Bicycle Brushed Motor Reductor Brushed DC Motor for Electric Bicycle, Scooter, Bikes, etc (500W,36V)

View on Amazon
HIFMGHE MY1018E-D

#2 · Best Specified Torque

2. HIFMGHE MY1018E-D

  • Voltage: 36 V
  • Wattage: 500 W

Best for: 36V high-load DIY builds.

Why it ranks #2: This 36V 500W geared motor lists 1.98Nm torque, 1700RPM, and up to 440.9 lb capacity, with IP44 protection also stated.

A 440.9-pound stated load capacity sets this 36V, 500W gear-reduction motor apart for heavier electric mobility projects. The MY1018E-D’s 1700RPM speed and 1.98Nm torque pair with gear reduction for applications that need useful drive under load, while its IP44 protection rating adds a specified level of protection for the motor.

The 36V rating and 500W output give builders concrete electrical and power requirements to plan around, and 1700RPM with 1.98Nm torque describes its motor performance. Gear reduction is suited to projects seeking reduced output speed, while the stated 440.9-pound capacity supports consideration for heavier builds. The iron, aluminum, and copper construction and IP44 protection are useful listed specifications when assessing the motor for an electric bicycle, scooter, or dirt-bike project; installation hardware beyond the motor is not listed as included.

Pros
  • 500W output at 36V
  • Gear-reduction motor rated at 1700RPM
  • Stated torque of 1.98Nm
  • Listed load capacity up to 440.9 pounds
Cons
  • Only the brushed DC motor is listed as included.

Skip it if you want a complete conversion kit; the LIAPDG kit lists a motor, chain, controller, chainring, and throttle.

This suits builders seeking a 36V gear-reduction motor for an e-bike, scooter, or dirt-bike project with a high stated load capacity. Plan separately for controls and other installation parts, since only the motor is listed as included.

Full product details
BrandHIFMGHE
Included Components1x Brushed DC motor
Item Dimensions W x H4.3"W x 1.65"H
ManufacturerHIFMGHE
MaterialAluminum, Copper, Iron
ModelGREM527
Dimensions4.3"W x 1.65"H
Voltage36 volts
Wattage500 watts

Listed on Amazon as: 36V 500W Gear Reduction Electric Motor MY1018E-D, 1700RPM Electric Bicycle Brushed Motor Reductor, High Torque DC Motor for Electric Bicycles Dirt Bikes Scooters E-Bike

View on Amazon
LNUJIUN 600W Reduction Motor

#3 · Lowest Reduction Speed

3. LNUJIUN 600W Reduction Motor

  • Voltage: 36 V DC
  • Wattage: 600 W
  • Weight: 11 lb

Best for: 36V low-speed geared builds.

Why it ranks #3: Its 36V, 600W gear-reduction unit is rated at 450r/min with a 1:6.67 reduction ratio, fitting buyers who prioritize slower output.

A 1:6.67 reduction ratio brings this 36V, 600W brushed motor to a listed 450r/min, prioritizing reduced-speed output for electric scooters, bicycles, and mopeds. Its large 4.02-by-2.2-inch base adds a practical mounting detail for builders planning a stable installation around this geared motor.

The 1:6.67 reduction ratio and 450r/min speed distinguish this motor from high-speed, un-geared alternatives, helping buyers assess whether its output suits a lower-speed drive setup. A 600W rating at 36V sets the project’s power and voltage requirements. Its stated 4.02-by-2.2-inch base increases contact area and is described as improving stability during operation, while the 8.07-by-5.63-inch product dimensions and 11-pound weight are useful planning details for installation and available space.

Pros
  • 600W brushed motor rated at 36V
  • 1:6.67 reduction ratio
  • Listed output speed of 450r/min
  • Large 4.02-by-2.2-inch base for stability
Cons
  • At 11 pounds, it adds substantial motor weight to the build.

Skip it if you need a 48V brushless motor kit; the LIAPDG kit lists 48V and includes a controller and chain.

This fits a 36V scooter, bicycle, or moped project seeking reduced-speed geared output and a stable base. Account for its 11-pound weight and listed dimensions when planning mounting space and vehicle weight.

Full product details
BrandLNUJIUN
Included Components1x Reduction Motor
Item Dimensions W x H8.07"W x 5.63"H
Item Weight11 pounds
ManufacturerLNUJIUN
MaterialAluminum Alloy, Cast Iron, Copper, Ferrite
Model36VDC 600W
Dimensions8.07"W x 5.63"H
Voltage36 volts_of_direct_current
Wattage600 watts

Listed on Amazon as: 36VDC 600W Gear Reduction Electric Motor 450r/min Brushed DC Motor Reduction Motor for Electric Scooters, Bicycles, Mopeds

View on Amazon
WETUSSEX MY1016Z

#4 · 12V Geared Option

4. WETUSSEX MY1016Z

Best for: 12V low-speed bike projects.

Why it ranks #4: This bicycle-oriented gear-reduction motor offers 350W at 12V and a stated load capacity of up to 330.69 lb.

This 12V gear-reduction motor combines 350W output with a 3000RPM brushed motor to support reduced-speed riding and smoother starts. Its stated load capacity reaches 330.69 pounds, making it a fit to consider for lighter electric bicycle or scooter projects that need low-end torque rather than an un-geared high-speed motor.

The gear transmission reduces the motor’s speed for smoother starts and low-speed riding, a practical match for builds where controlled movement matters. Its 12V requirement distinguishes it from higher-voltage options and gives the builder a clear system specification to plan around. The 350W output and stated capacity up to 330.69 pounds provide useful boundaries when evaluating the project’s power and load needs. The brushed construction also means the motor type should guide control-system selection.

Pros
  • Gear transmission supports smoother starts
  • Specified for a 12V system
  • 350W brushed motor
  • Listed load capacity up to 330.69 pounds
Cons
  • Its 12V rating limits it to builds planned around a 12V system.

Skip it if you need 36V gear reduction; the WETUSSEX MY1018E-D is listed at 36V and 500W.

Consider it for a 12V bicycle or scooter project where gear reduction and smoother low-speed starts matter. Its 350W rating and stated load limit make it less suited to builds requiring greater listed capacity.

Full product details
BrandWETUSSEX
ManufacturerWETUSSEX
ModelMY1016Z

Listed on Amazon as: Gear Reduction Electric Motor, 12V 350W 3000RPM Electric Bicycle Brushed Motor Reductor Brushed DC Motor for Electric Bicycle, Scooter, Bikes, etc (350W,12V)

View on Amazon
Unndysrt 48V Kit

#5 · Best Brushed Kit

5. Unndysrt 48V Kit

  • Voltage: 48 V

Best for: Adjustable-speed 48V kit builders.

Why it ranks #5: The 48V 1000W kit includes a controller, chain, keys, and LED-display throttles, plus infinitely adjustable speed and a stated 120kg load capacity.

An infinitely adjustable controller and LED-display throttles make this 48V brushed motor kit a hands-on choice for builders who want speed control as part of the package. The kit lists a motor, chain, controller, keys, and throttle pair, bringing several core conversion components together for scooter, go-kart, or motorized-bicycle projects.

The adjustable throttle lets the rider vary speed rather than rely on a fixed setting, while the LED display provides an on-throttle readout. The included chain is specified for an 8mm T8F sprocket, giving the drivetrain a concrete chain standard to plan around. Its 48V rating and listed 120kg load capacity help define the build’s electrical and load boundaries. With a motor, controller, keys, and throttle pair included, it covers several core components, though the listed mounting bracket length is 5cm.

Pros
  • 48V brushed motor kit
  • Infinitely adjustable speed control
  • Throttles include an LED display
  • Includes chain, controller, keys, and throttle pair
Cons
  • Listed load capacity is 120kg.

Skip it if you need 2000W brushless output; the MOTOBERRY MY1020 is listed as a 60V, 2000W brushless motor.

Pick this kit for a 48V scooter, go-kart, or motorized-bicycle project where adjustable throttle control and several included components are useful. Keep its 120kg load capacity and T8F chain specification in view.

Full product details
BrandUnndysrt
Included Components1*Brushed Motor 1*Chain 1*Controller 2*Keys 1Pair*Throttles with LED Display
ManufacturerUnndysrt
ModelBrushed Motor Kit
Voltage48 volts

Listed on Amazon as: 48V 1000W Brushed Motor Kit, Electric Dc Motor Kits 3000rpm with 26A Infinitely Adjustable Speed Controller Throttles with LED Display for Scooters Go Karts Motorized Bicycle E-Bike

View on Amazon
LIAPDG 2000W Kit

#6

6. LIAPDG 2000W Kit

  • Voltage: 48 V
  • Wattage: 2000 W
  • Weight: 13.6 lb

Best for: 48V brushless conversion kits.

Why it ranks #6: This 48V brushless kit includes a controller, chain, chainring, and twist throttle; its 2000W output and 4300RPM rating suit higher-power builds.

A 2000W brushless motor paired with a controller, chain, chainring, and twist throttle makes this LIAPDG kit a broad starting package for a 48V conversion. Its rated 4300RPM speed, 5.4Nm torque, and stated 100–150kg load range give builders useful performance boundaries when planning an electric vehicle project.

The brushless toothed motor’s 2000W output and 5.4Nm torque provide the listed power and torque figures for assessing a build’s demands. Its 48V specification identifies the primary voltage, while the stated nominal-voltage range spans 36V through 84V; builders should follow the operating manual and verify the system configuration. The included controller, chain, chainring, and twist throttle bring drivetrain and control components together, and automatic phase-angle identification is listed as a controller feature.

Pros
  • 2000W brushless toothed motor
  • 48V DC specification with a listed nominal-voltage range
  • Includes controller, chain, chainring, and twist throttle
  • Rated 4300RPM with 5.4Nm torque
Cons
  • The listed maximum current is 40A–50A, a substantial current requirement for the build.

Skip it if you need a 72V, 3000W kit; the Kunray BY1020 kit is specified for that voltage and output.

This kit suits builders seeking a brushless 48V conversion package with controller and drivetrain components included. Review its manual and voltage and current specifications carefully before committing to a particular vehicle electrical system.

Full product details
BrandLIAPDG
Included Components1* Motor 1* Chain 1* Controller 1* Chainring 1 Pair* Twist Throttle 2* Keys
Item Weight13.6 pounds
ManufacturerLIAPDG
MaterialAluminum, Copper
ModelElectric Motor
Voltage48 volts
Wattage2000 watts

Listed on Amazon as: 2000W 48V Electric Brushless DC Motor Kit with Chain, Controller

View on Amazon
Kunray BY1020 Kit

#7

7. Kunray BY1020 Kit

  • Voltage: 72 V
  • Weight: 8 kg

Best for: 72V high-output DIY builders.

Why it ranks #7: Its brushless kit is rated at 3000W and 72V, with a 50A controller and 4900RPM rated speed, but needs a separately sourced mounting bracket.

A 3000W brushless motor and 50A controller make the Kunray kit a high-output option for 72V electric vehicle projects. Its listed 4900RPM rated speed, 6700RPM maximum speed, and 5.4Nm torque give builders concrete performance figures, while the included pedal and chain support a more complete drivetrain setup.

The motor is rated at 72V and 45A, with the controller specified for 48–72V and up to 50A, so matching the electrical system to the kit’s requirements matters. The stated 100–150kg load range helps set expectations for the project, while the chain and pedal are listed among the included components. Motor direction can be changed through wiring between the motor and controller, offering a configuration option, but the listing explicitly says an installation bracket or base is not included.

Pros
  • 3000W brushless motor
  • 50A controller specified for 48–72V
  • Rated speed of 4900RPM and maximum speed of 6700RPM
  • Includes pedal and chain
Cons
  • No installation bracket or base is included.

Skip it if you need a kit with a listed mounting base; the LIAPDG kit specifies a 5.6cm mounting base length.

Choose this for a high-output DIY build planned around the kit’s voltage and current specifications, with chain and pedal included. Arrange a mounting solution separately, since the motor is supplied without a bracket or base.

Full product details
BrandKunray
Included Componentsrotar
Item Dimensions W x H6.33"W x 4.13"H
Item Weight8 kg
ManufacturerKunray
MaterialAluminum
ModelMotor:BY1020 Controller:MOS24
Voltage72 volts

Listed on Amazon as: Brushless DC Motor Kit 3000W 72V with 50A Brushless Controller,Pedal,Chain

View on Amazon
Vevitts YZ011

#8

8. Vevitts YZ011

  • Voltage: 24 V DC
  • Wattage: 350 W-hours
  • Weight: 4.5 lb

Best for: 24V Razor replacement builds.

Why it ranks #8: The 24V 350W brushed motor runs at 3000RPM and is listed as compatible with Razor MX350, MX400, and E300, rather than as a geared bicycle motor.

Compatibility with the Razor MX350, MX400, and E300 gives this 24V, 350W brushed motor a clearly defined replacement role. Its 3000RPM permanent-magnet design, 8mm shaft, and reversible operation help builders identify key drivetrain and control considerations before fitting it to a compatible scooter project.

The 24V rating and 20A current specification help establish electrical requirements for a replacement setup, while the 8mm shaft gives a concrete dimension to check against the drivetrain. Forward and reverse operation offers directional flexibility, but the listing notes that counterclockwise speed is 200–300RPM lower than clockwise speed. The aluminum body, copper coil, and natural air cooling are specified construction and operating features; together with the named Razor compatibility, they make this most relevant to a targeted replacement rather than an unspecified conversion.

Pros
  • Listed compatible with Razor MX350, MX400, and E300
  • 24V permanent-magnet brushed motor
  • 8mm shaft diameter
  • Forward and reverse operation
Cons
  • Counterclockwise speed is 200–300RPM lower than clockwise speed.

Skip it if you need a 36V gear-reduction motor; the LNUJIUN 36VDC 600W model is rated at 450r/min.

This is a focused choice for a 24V Razor MX350, MX400, or E300 replacement project needing a brushed motor with an 8mm shaft. Account for the slower counterclockwise speed when reverse operation matters.

Full product details
BrandVevitts
Included Components350W 3000RPM Electric Motor
Item Dimensions W x H5.58"W x 4.33"H
Item Weight4.5 pounds
ManufacturerVixest Trading Co.,Ltd
MaterialAluminum
ModelYZ011
Dimensions5.58"W x 4.33"H
Voltage24 volts_of_direct_current
Wattage350 watt-hours

Listed on Amazon as: Small Brushed Permanent Magnet Electric Motor for E Scooter Drive Speed Control 24V 350W 3000RPM

View on Amazon
L-faster MY1016

#9

9. L-faster MY1016

  • Weight: 2.61 kg

Best for: Small-wheel scooter replacements.

Why it ranks #9: This 36V brushed motor is described as a high-speed unit without a reduction gearbox, with low torque and use on small-wheel scooters.

A supplied mounting bracket gives this 36V L-faster brushed motor a practical starting point for a small-wheel scooter replacement. Unlike gear-reduction options, it is a high-speed motor without a reduction gearbox; its fast output speed and small torque make it a better match for lighter drive demands than heavy-load riding.

The 36V specification provides a clear system requirement for a replacement project, and the included mounting bracket can simplify the motor’s mounting workflow. However, this motor has no reduction gearbox: the supplied facts describe fast output speed but small torque, specifically cautioning against heavy-drive use. That trade-off points toward small-wheel scooters rather than builds that need strong low-speed pulling. The listing identifies it as a brushed DC motor, so buyers should plan their controls and installation around that motor type.

Pros
  • 36V motor for a matching system
  • Mounting bracket included
  • High-speed output
  • Identified for small-wheel scooter use
Cons
  • Small torque and no reduction gearbox make it unsuitable for heavy loads.

Skip it if you carry heavy loads; the WETUSSEX MY1018E-D lists gear reduction and capacity up to 440.9 pounds.

Choose this for a 36V small-wheel scooter replacement where fast output and the supplied mounting bracket suit the project. Avoid it for heavy loads: its high-speed, non-reduction design is explicitly described as low in torque.

Full product details
BrandL-faster
Item Weight2.61 kg
ManufacturerL-faster
ModelMY1016

Listed on Amazon as: Scooter DC Motor Bike Brushed DC Motor UNITE Scooter Motor With Mounting Bracket (36V)

View on Amazon
MOTOBERRY MY1020

#10

10. MOTOBERRY MY1020

  • Voltage: 60 V
  • Wattage: 2000 W
  • Weight: 4.6 kg

Best for: 60V brushless mid-drive builders.

Why it ranks #10: Its 60V, 2000W brushless mid-drive is aimed broadly at scooters, motorcycles, and go-karts, making it a less direct fit for a typical bicycle conversion.

A 60V brushless mid-drive configuration with a T8F 11-tooth sprocket gives this 2000W MOTOBERRY motor a specific chain-drive role in DIY scooters, e-bikes, and go-karts. Its 4300–4500RPM no-load speed and stated 100–150kg load range help builders assess whether its high-speed output suits their vehicle project.

The brushless design is listed as low-noise and maintenance-free, which can reduce routine motor upkeep in a DIY vehicle. Its aluminum-alloy housing is described as supporting heat dissipation, while natural air cooling avoids a listed need for a separate cooling system. The 60V rating, 2000W output, and 4300–4500RPM no-load speed set important electrical and performance boundaries. A T8F 11-tooth sprocket makes the chain-drive specification explicit, so the project’s chain setup needs to match.

Pros
  • Brushless 60V motor
  • 2000W output
  • T8F 11-tooth sprocket
  • Listed 4300–4500RPM no-load speed
Cons
  • Its 60V specification requires a 60V-oriented build.

Skip it if you need a 48V brushless kit; the LIAPDG kit is specified at 48V and includes a controller and chain.

This is for DIY builders setting up a 60V chain-driven scooter, e-bike, or go-kart and seeking brushless operation. Its T8F 11-tooth sprocket and high no-load speed make chain and vehicle setup key fit considerations.

Full product details
BrandMOTOBERRY
Included ComponentsMOTOR
Item Dimensions W x H4.6"W x 4.7"H
Item Weight4.6 kg
ManufacturerMOTOBERRY
MaterialAlloy Steel
ModelMY1020
Dimensions4.6"W x 4.7"H
Voltage60 volts
Wattage2000 watts

Listed on Amazon as: 60V 2000W Brushless DC Motor Use for Electric Scooter Electric Motorcycle E-Bike Beach Off-Road Vehicle, go Kart

View on Amazon

Why a fast motor can feel weak on a bike

A high RPM figure does not by itself mean a motor will pull a bicycle load well from a stop. The L-faster MY1016 is specifically described as having no reduction gearbox, fast output speed, and small torque, with a warning that it does not do well driving heavy loads. In contrast, the WETUSSEX MY1018E-D uses gear transmission to reduce motor speed for smoother starts and low-speed riding.

That illustrates a practical trade-off: direct high-speed output may suit a small-wheel scooter, while reduction gearing can be more useful when a build needs controlled low-speed movement. Do not compare RPM values alone across these listings; gearing changes output speed, and the products do not all report comparable torque or reduction data.

Match the motor’s intended use and drive arrangement to the bike rather than treating the largest RPM number as the best performance indicator.

Check the complete drive system before fitting

A motor’s voltage and power rating do not confirm that it will connect to your bike’s battery, controller, chain, or frame. Some listings are standalone motors, while the Unndysrt 48V Kit and LIAPDG 2000W Kit list controllers and drive components in the package. The Kunray BY1020 Kit includes a controller but explicitly does not include an installation bracket or base, so mounting remains a separate concern.

There is also a voltage mismatch trap: the LIAPDG kit is described as a 48V motor, while its nominal-voltage list spans 36V to 84V; that range is not proof that every configuration is plug-and-play. Verify the selected controller’s voltage and current limits, battery rating, mounting dimensions, chain specification, and wiring instructions for the exact configuration.

The supplied facts do not establish universal compatibility with any particular bicycle.

How to Choose an Electric-Bike DC Motor

Voltage and system match

Choose a motor voltage that matches the battery and controller you intend to use. These options span 12V for the WETUSSEX MY1016Z, 24V for the Vevitts YZ011, 36V for several geared motors, 48V for kits, and 72V for the Kunray BY1020 Kit; the MOTOBERRY MY1020 is rated 60V. The LIAPDG 2000W Kit lists a 48V motor alongside a broader nominal-voltage range, so verify the exact operating configuration rather than assuming interchangeability.

A buyer reusing a compatible 36V setup may favour a 36V geared option, while someone building around a different battery should consider only a motor and controller whose ratings align. Confirm current limits and wiring separately; voltage alone does not establish system compatibility.

Power, speed, and reduction

Look at rated power together with output speed and gearing, not as isolated measures. The listed motors range from 350W on the WETUSSEX MY1016Z and Vevitts YZ011 to 3000W on the Kunray BY1020 Kit; stated speeds include 450r/min for the LNUJIUN 600W Reduction Motor and 4300–4500RPM no-load for the MOTOBERRY MY1020. Geared options are described as reducing speed to support smoother starts, while the L-faster MY1016 is explicitly a fast, non-reduction motor with small torque.

Riders prioritizing controlled low-speed operation should favour reduction gearing; a buyer planning a higher-power DIY vehicle may look at brushless kits, but should not assume their power or speed suits a bicycle.

Motor type and supplied hardware

Decide whether you need a standalone brushed motor or a brushless package with controls and drive parts. The WETUSSEX geared options are brushed motors, while the MOTOBERRY MY1020, LIAPDG 2000W Kit, and Kunray BY1020 Kit are brushless. The Unndysrt 48V Kit includes a controller, chain, and LED-display throttles; the LIAPDG kit lists a controller, chain, chainring, and twist throttle.

By comparison, the LNUJIUN 600W Reduction Motor is listed as a single reduction motor, and the Kunray listing says a mounting bracket or base is not included. Choose a kit when its included components match your build, or a standalone motor when you already have compatible hardware.

Verify exact chain, controller, mounting, and wiring compatibility before purchase.

Which DC motor should you choose for your bike?

For a conventional electric-bike conversion focused on controlled starts and low-speed pulling, choose the WETUSSEX MY1018E-D: its 36V 500W rating and gear reduction make it the most direct match in this group. If you need the same basic voltage and power but want a stated torque figure, consider the HIFMGHE MY1018E-D, which lists 1.98Nm. For a slower 36V reduction motor with 600W output, the LNUJIUN 600W Reduction Motor is a different option, while the WETUSSEX MY1016Z suits a buyer specifically seeking a 12V geared motor.

Choose the Unndysrt 48V Kit if its brushed setup and included controls suit your build. The higher-power brushless kits and scooter-focused motors are less direct bicycle choices; confirm battery, controller, mounting, and drivetrain compatibility before deciding.

Frequently Asked Questions

How do I match an electric-bike motor’s voltage to my battery and controller?

Match the motor’s stated voltage with the battery and controller ratings, and check that the controller is suitable for the motor type and power. The listings provide some motor voltages, but do not establish compatibility with your particular battery or controller. Verify all three components before buying or connecting them.

Will a gear-reduction motor fit my bike’s frame, chain, and mounting points?

Not necessarily. Gear reduction describes the motor arrangement, not whether it fits a particular bicycle. Compare the motor’s mounting dimensions and shaft or sprocket arrangement with your frame and drivetrain, and check chain alignment and clearance.

The product listings do not confirm fit for every bike, so verify dimensions before ordering.

What battery capacity and wiring do I need for a 500W or 2000W motor?

Battery capacity and wiring depend on the motor’s voltage, controller requirements, expected riding time, and the rest of the setup. The motor’s wattage alone does not specify a suitable battery capacity or wire size. Check the motor and controller documentation, then confirm the battery and wiring can support that system safely.

What is the difference between a brushed and brushless motor in these listings?

The listings identify several motors as brushed and others as brushless, but do not provide a full comparison of their performance or maintenance needs. Check that the motor type matches the controller and other components you plan to use. Some listed kits include a controller, but confirm its compatibility with your build.

When should I choose a gear-reduction motor over a faster-rated motor?

A gear-reduction motor may suit a build prioritizing controlled starts and low-speed pulling, while a higher RPM rating may appeal when faster motor output is a priority. RPM alone does not establish road speed or bike performance. Consider the intended riding use and verify gearing, mounting, battery, and controller compatibility.

Final Words

For a conventional conversion centered on controlled starts and low-speed pulling, the WETUSSEX MY1018E-D is the clearest match: it lists 36V, 500W, and gear reduction. The HIFMGHE is an alternative if its stated torque figure matters; the LNUJIUN offers 600W reduction at 36V. Treat the higher-power brushless and scooter-focused options as less direct bicycle choices, and verify mounting, drivetrain, battery, and controller fit before choosing.

Leave a Reply

Your email address will not be published. Required fields are marked *