Best Black Deep Dish Rims For Trucks Compared

#1 · Best Overall

1. Vision 412 Rocker

• Material: Stainless Steel
• Compatible with Vehicle Type: Passenger Car
• Size: 20×12
• Wheel Size: 20 in

Best for: Deep-dish 6×135 truck builds.

Why it ranks #1: Its 20×12 size, 6×135 bolt pattern, -51mm offset, and 4.5-inch backspacing offer a pronounced deep-dish profile with useful fitment details.

The Vision 412 Rocker pairs a 20×12 wheel with a -51mm offset, giving truck owners a pronounced deep-dish setup in a gloss-black finish. Its 6×135 bolt pattern targets a specific fitment family, while the 4.5-inch backspacing and 87.1mm hub bore provide useful dimensions for checking wheel compatibility.

The 20×12 size and -51mm offset define the Rocker’s broad, outward-set stance, which suits buyers seeking a deep-dish look rather than a conservative replacement profile. Its 6×135 bolt pattern narrows the fitment target, and the listed 4.5-inch backspacing and 87.1mm hub bore give installers additional measurements to compare with vehicle requirements. Gloss black keeps the wheel’s finish visually consistent, but the listing identifies one wheel per quantity, so a full set requires planning for multiple units.

Skip it if you need a complete set in one purchase; this listing supplies one wheel, not a four-wheel set.

A buyer seeking a gloss-black 20×12 wheel for a 6×135 setup can use the Rocker’s listed offset, backspacing, and hub-bore measurements to assess fit; confirm those dimensions suit the truck.

Listed on Amazon as: Vision 412 Rocker 20×12 6×135-51mm Gloss Black Wheel Rim 20" Inch

#2 · Best Truck Fitment

2. Fittipaldi FA20B

• Material: Aluminum
• Compatible with Vehicle Type: Truck
• Size: 22 in
• Wheel Size: 22 in

Best for: Truck fitment with TPMS compatibility.

Why it ranks #2: This truck-compatible 22×12 aluminum wheel has a -44 offset, dual 6×135/6×5.50 bolt pattern, and listed TPMS compatibility.

Fittipaldi’s FA20B is listed as a truck-compatible 22×12 wheel with TPMS compatibility, combining a large deep-dish profile with support for tire-pressure monitoring systems. Its -44mm offset and dual 6×135/6×5.50 bolt-pattern listing give buyers concrete fitment details to compare before choosing this gloss-black wheel.

The 22×12 size and -44mm offset establish a broad, deep-dish stance, while the listed 6×135/6×5.50 patterns help buyers identify whether the wheel matches their truck’s bolt layout. TPMS compatibility supports use with a tire-pressure monitoring system, reducing uncertainty around that equipment requirement. Fittipaldi specifies A356 aluminum alloy with T6 heat treatment and a lifetime structural warranty, plus a one-year finish warranty. Those details make it a distinct option, though the listing does not state backspacing or hub bore.

Skip it if you need listed backspacing and hub-bore dimensions; the Vision 412 Rocker specifies both measurements.

Choose the FA20B if your truck needs the listed 22×12 dimensions, compatible TPMS support, and a 6×135 or 6×5.50 pattern. Its missing backspacing and hub-bore figures may limit fitment planning.

Listed on Amazon as: FITTIPALDI OFF ROAD FA20B 22X12, ET -44, PCD 6X135/6X5.50, CB 106.2-Gloss Black, FA20-221263539N44B

#3 · Best Milled Finish

3. American Truxx Euphoria

• Material: Chrome
• Compatible with Vehicle Type: Truck
• Size: 22×12
• Wheel Size: 22 in

Best for: Milled-face 22-inch truck style.

Why it ranks #3: The truck-compatible 22×12 wheel pairs a 6×135 bolt pattern and -44mm offset with a black/milled finish for a wide stance.

The AMERICAN TRUXX Euphoria combines a 22×12 size and -44mm offset with a black-and-milled finish, giving truck owners a large deep-dish wheel with contrasting surface detail. Its listed 6×135 bolt pattern identifies the intended fitment target, while the 48-pound weight is a practical consideration during handling.

A 22×12 profile and -44mm offset create the key proportions for buyers pursuing a deep-dish appearance, and the 6×135 bolt pattern provides a specific fitment reference. The black/milled finish adds contrast without changing those fitment dimensions. At 48 pounds, the listed wheel weight is relevant when handling and installing it. The specifications identify chrome as the material and state no manufacturer warranty, so buyers should weigh that information alongside the styling and fit requirements before selecting it.

Skip it if you prioritize a lower listed wheel weight; the Vision 412 Rocker specifications do not state a wheel weight.

This Euphoria fits buyers pursuing a black/milled 22×12 wheel for a 6×135 truck setup. Factor its listed 48-pound weight into handling plans, and note that the supplied specifications state no manufacturer warranty.

Listed on Amazon as: AT1914 Euphoria 22×12 6×135-44mm Black/Milled Wheel Rim 22" Inch

#4 · Best 22-Inch Deep Dish

4. Vision 402 Riot 22×12

• Compatible with Vehicle Type: Passenger Car
• Size: 22×12
• Wheel Size: 22 in

Best for: 22-inch 6×139.7 machined-face setup.

Why it ranks #4: Its 22×12 size and -51mm offset create a notably wide configuration, while the 6×139.7 pattern and 106.2mm hub bore are specified.

The Vision 402 Riot combines a 22×12 size and -51mm offset with a gloss-black, machined-face finish, creating a large deep-dish look for a 6×139.7 build. Its 106.2mm hub bore and 4.5-inch backspacing add specific measurements buyers can use when assessing fitment.

The 22×12 dimensions and -51mm offset define a broad, outward-set profile, making this a larger option for buyers who want a prominent deep-dish appearance. Its 6×139.7, also listed as 6×5.5 inches, identifies the bolt pattern, while the 106.2mm hub bore and 4.5-inch backspacing give installers further fitment measurements to compare. Gloss black paired with a machined face supplies contrast. The listing includes one wheel, so those assembling a set need to account for individual units.

Skip it if you need an 8×170 bolt pattern; the Vision 402 Riot 20×12 lists that configuration instead.

This 402 Riot suits buyers seeking a 22×12 gloss-black wheel with a machined face for a 6×139.7 setup. Check its hub bore and backspacing against the vehicle, and plan for one wheel per listing.

Listed on Amazon as: Vision 402 RIOT Custom Wheel – 22×12, -51 Offset, 6×139.7 Bolt Pattern, 106.2mm Hub – Gloss Black with Machined Face Rim

#5

5. Vision 402 Riot 20×12

• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car
• Size: 20×12
• Wheel Size: 20 in

Best for: Eight-lug gloss and machined style.

Why it ranks #5: This 20×12 wheel has a -51mm offset and 8×170 bolt pattern; confirm vehicle fit because the listing identifies passenger cars.

The Vision 402 Riot combines a 20×12 profile and -51mm offset with a gloss-black, machined-face finish, giving an eight-lug truck build a visibly detailed deep-dish look. Its 8×170 bolt pattern and 125.2mm hub bore make fitment assessment specific rather than one-size-fits-all.

The 20×12 dimensions and -51mm offset support a wide, outward-set appearance, while the machined face breaks up the gloss-black surface with contrasting detail. An 8×170 bolt pattern makes this wheel relevant to buyers whose vehicle uses that pattern; the 4.5-inch backspacing and 125.2mm hub bore provide further measurements for fitment checks. The aluminum construction distinguishes its material, and the listing includes one wheel, so buyers assembling a set need to account for separate units.

Skip it if you need a 6×135 wheel; the Vision 412 Rocker lists that bolt pattern instead.

This Riot suits a buyer targeting an 8×170 truck fitment and a 20×12 machined-face look. Its listed backspacing and hub bore help narrow the fit check, but the product is a single wheel.

Listed on Amazon as: Vision 402 Riot Gloss Black Machined Face 20X12 8×170 ET-51 Wheel/Rim

#6

6. Vision 306 Rapier

• Compatible with Vehicle Type: Passenger Car
• Size: 20×12
• Wheel Size: 20 in

Best for: Eight-lug 20-inch milled spokes.

Why it ranks #6: The 20×12 rim has a -51mm offset and 8×180 bolt pattern, with 4.5-inch backspacing; truck compatibility is not stated.

The Vision 306 Rapier pairs a 20×12 profile and -51mm offset with gloss-black milled spokes, giving an eight-lug build a detailed deep-dish appearance. Its 8×180 bolt pattern, 4.5-inch backspacing, and 124.2mm hub bore supply specific dimensions for buyers checking wheel fitment.

A 20×12 size and -51mm offset support the broad, outward-set stance associated with a deep-dish look, while the milled-spoke finish adds contrast to the gloss-black surface. The 8×180 bolt pattern narrows its use to matching vehicle setups; the 4.5-inch backspacing and 124.2mm hub bore provide further points for fitment comparison. Vision lists one wheel per quantity, so buyers planning a complete set should account for multiple units. The supplied vehicle category says passenger car, making truck fitment a point to verify.

Skip it if you need a 6×135 bolt pattern; the Vision 412 Rocker specifies that pattern instead.

The Rapier suits buyers seeking a gloss-black milled-spoke 20×12 wheel for an 8×180 setup. Its listed dimensions support fit checks, but the supplied compatibility category is passenger car rather than truck.

Listed on Amazon as: Vision 306 Rapier 20×12 8×180-51mm Black/Milled Wheel Rim 20" Inch 306-20287GBMS-51

#7

7. RockTrix RT116

• Material: Aluminum
• Compatible with Vehicle Type: SUV, Truck
• Size: 17×9 -12mm offset
• Wheel Size: 17 in

Best for: F-150-specific 17-inch option.

Why it ranks #7: It explicitly fits trucks and lists Ford F-150 compatibility, but its 17×9 size and -12mm offset are less deep-dish than wider options.

RockTrix’s RT116 names Ford F-150 model years 2004–2026 and Bronco Raptor compatibility, giving those owners a concrete starting point for a 17-inch matte-black wheel search. Its 17×9 size, 6×135 pattern, and -12mm offset distinguish it from the roundup’s larger, more deeply offset rims.

The 17×9 dimensions and -12mm offset offer a less extreme profile than the 20×12 and 22×12 options, which can matter to buyers seeking a smaller wheel format. RockTrix lists compatibility with 2004–2026 Ford F-150s and the Bronco Raptor, plus a 2200-pound weight rating. The 4.5-inch backspacing and 6×135 bolt pattern provide fitment details, while the included center cap and wheel make the package contents clear. The matte-black aluminum wheel requires professional installation according to the supplied warning.

Skip it if you want a 20×12 or 22×12 deep-dish profile; the RockTrix is a 17×9 wheel.

This RT116 suits F-150 and Bronco Raptor owners seeking a 17×9 matte-black wheel with a stated 2200-pound rating. Its smaller size and -12mm offset are boundaries for buyers pursuing a more extreme deep-dish stance.

Listed on Amazon as: RockTrix RT116 17 inch Wheel for 2004-2026 Ford F150, 17×9 6×135 Rims -12mm Offset, 4.5in Backspacing, Matte Black, 2200 lb Weight Rating, Also compatible with Bronco Raptor

#8 · Best Steel Option

8. Rough Country Black Steel

• Material: Steel
• Compatible with Vehicle Type: Jeeps, Off Road Vehicles, SUV, Truck
• Size: 17×9 – 8×6.5, -12mm
• Wheel Size: 17 in

Best for: Steel wheel for demanding trails.

Why it ranks #8: This truck-compatible 17×9 steel wheel has a -12mm offset, 8×6.5 bolt pattern, and high-gloss black powder coat finish.

Rough Country’s 17×9 black steel wheel combines a 10-slot D-window design with a high-gloss black powder coat, giving truck and Jeep builds a trail-oriented appearance. The 8×6.5 bolt pattern, -12mm offset, and 5.10 bore provide concrete fitment dimensions for buyers comparing heavy-duty steel options.

The high-strength steel construction is presented for rocks, mud, and tough trails, while the product description notes that steel rims are heavier than aluminum and provide added stability. That tradeoff matters to buyers prioritizing trail-oriented construction over lower wheel weight. The 17×9 size and -12mm offset define the profile, and the 8×6.5 pattern with 5.10 bore supports a more detailed fitment check. Its powder-coated gloss-black finish and 10-slot D-window design combine surface protection and recognizable styling.

Skip it if you prioritize aluminum construction and a 20×12 size; the Rough Country 91M Series uses single-piece aluminum.

This wheel suits truck and Jeep owners focused on steel construction for trail use and a 17×9 D-window look. Its heavier-than-aluminum build is the key tradeoff, and the 8×6.5 pattern must match.

Listed on Amazon as: Rough Country Black Steel Wheel – 17×9, 8×6.5 Bolt Pattern, 12mm Offset, 5.10 Bore, Heavy-Duty D-Window Off-Road Rim for Trucks & Jeeps

#9

9. Rough Country Series 91

• Material: Aluminum
• Compatible with Vehicle Type: Jeeps, Off Road Vehicles, Truck
• Size: 20×12 inch
• Wheel Size: 20 in

Best for: One-piece aluminum with milled accents.

Why it ranks #9: It is listed for trucks and measures 20×12, but the specified 44mm offset is less suited to a deep-dish look than negative-offset choices.

Rough Country’s Series 91 uses single-piece aluminum construction and a gloss-black finish with milled accents, pairing a 20×12 profile with a 6×5.5-inch bolt pattern. The -44mm offset supports a deep-dish look, while the included center cap means buyers receive a matching finishing component with the wheel.

The 20×12 size and -44mm offset establish the wheel’s wide, outward-set proportions, while the 6×5.5-inch bolt pattern defines its fitment target. Single-piece aluminum construction is described as strong and light, making the material choice relevant to buyers comparing wheel construction. Gloss black with milled accents adds visual contrast, and the included Rough Country center cap completes the listed package. The one-year finish and limited lifetime structural warranty provide separate coverage details; verify the pattern and other fit requirements for the vehicle.

Skip it if you need an 8×170 setup; the Vision 402 Riot lists that pattern instead.

The Series 91 suits truck, Jeep, and off-road vehicle owners targeting a 20×12 gloss-black wheel with milled details. Its 6×5.5-inch bolt pattern is the central fitment boundary to check.

Listed on Amazon as: Rough Country 91M Series One-Piece Aluminum Wheel – 20×12, 6×5.5" Bolt Pattern, 44mm Offset, Gloss Black

#10

10. American Racing AR172 Baja

• Material: Aluminum
• Compatible with Vehicle Type: SUV
• Size: 17X9,6X5.5,-12mm
• Wheel Size: 17 in

Best for: Satin-black 17-inch wheel buyers.

Why it ranks #10: The 17×9 satin-black wheel has a -12mm offset, but its compatible vehicle type is listed as SUV rather than truck.

The American Racing AR172 Baja pairs a 17×9 size with a -12mm offset and satin-black finish, offering a compact alternative to 20- and 22-inch deep-dish choices. Its 6×5.5 bolt pattern and included center cap give buyers useful configuration details, although the supplied specifications list SUV compatibility rather than truck compatibility.

The 17×9 format and -12mm offset provide the wheel’s core stance dimensions, while the 6×5.5 pattern helps buyers compare it against vehicle requirements. Satin black offers a subdued finish rather than gloss or machined-face detailing. The listing includes a center cap, and American Racing specifies a one-year finish warranty. Vehicle compatibility is listed as SUV, so truck owners should treat that as a fitment boundary and verify that their particular setup matches the wheel’s dimensions.

Skip it if you need a wheel explicitly listed for trucks; the Rough Country 91M Series includes truck compatibility.

The AR172 Baja suits buyers after a satin-black 17×9 wheel with a -12mm offset and included cap. Its supplied compatibility category is SUV, so truck buyers should establish fitment before choosing it.

Listed on Amazon as: American Racing AR172 BAJA 17X9 6X5.5 4.53 -12mm SATIN BLACK – AR1727983B