Best Bike Rack For Travel Trailer Bumper

Best Bike Rack For Travel Trailer Bumper

A strong travel-trailer bumper rack should match your bumper, carry your bikes within its per-bike limit, and suit how many bicycles you bring. The Swagman RV Approved 4 Bike Rack leads for households needing room for as many as four bikes, while several two-bike options suit smaller loads. All seven picks are designed around RV or trailer bumper use, but their capacity, weight, mounting details, and bike-size restrictions differ.

Check that your trailer has a compatible 4- to 4.5-inch continuous-weld steel bumper before choosing; the listed racks are not a blanket fit for every bumper. This comparison highlights the practical differences, including a rack designed to fit around a rear spare tire, so you can narrow the choice to your trailer setup.

The Swagman RV Approved 4 Bike Rack is the leading choice for travel-trailer owners who need the most listed capacity: it carries up to four bikes, rated at 30 pounds per bike, on a 4- to 4.5-inch square bumper. Its heavy-duty steel construction and included U-bolts suit the stated bumper-mount use. If you carry fewer bikes or want adjustable platform width, consider a two-bike alternative; confirm bumper construction and each bicycle’s weight before buying.

Our Top Picks

Swagman RV Approved 4 Bike RackBest Overall

Swagman RV Approved 4 Bike Rack

Carries up to four bikes at 30 pounds each on a 4- to 4.5-inch square bumper, with steel U-bolts and a supporting upright bar.

View on Amazon
ECOTRIC RV Bicycle CarrierFlexible Capacity

ECOTRIC RV Bicycle Carrier

Fits most RVs, campers, and trailers with 4- to 4.5-inch continuous-weld steel bumpers and carries one to four bikes at 30 pounds each.

View on Amazon
Quick Products 2-Bike RackAdjustable Width

Quick Products 2-Bike Rack

Its adjustable mounting accommodates different bicycle lengths, while the two-bike limit is 30 pounds per bike; it excludes fat tires and wheels over 29 inches.

View on Amazon

Compare the Travel-Trailer Bumper Rack Options

#ProductWeightMaterialDimensionsCompatible with Vehicle TypeBuy
141 lbsteel43 x 45 x 2.54 inBicycle, TrailerView on Amazon
239.7 lbSteel—TrailerView on Amazon
39.3 kgAlloy Steel22"L x 3"W x 26"H—View on Amazon
4
Swagman RV Approved 2 Bike Rack4. Swagman RV Approved 2 Bike RackTwo-bike steel-bumper carrier
12 ozAlloy Steel26.5 x 21 x 2.5 inRV, Camper TrailerView on Amazon
515.4 lb——Recreational Vehicle (RV), Trailer, TruckView on Amazon
622 lbAlloy Steel34 x 12 x 26 inBicycleView on Amazon
7
Moxweyeni 2-Bike Bumper Rack7. Moxweyeni 2-Bike Bumper RackTwo-bike U-bolt setup
6.6 lbAlloy Steel, Aluminum24.8 x 19.69 x 19.69 inTrailerView on Amazon

Detailed Reviews: Best Bike Rack For Travel Trailer Bumper

Swagman RV Approved 4 Bike Rack

#1 · Best Overall

1. Swagman RV Approved 4 Bike Rack

  • Weight: 41 lb
  • Material: steel
  • Dimensions: 43 x 45 x 2.54 in
  • Compatible with Vehicle Type: Bicycle, Trailer

Best for: Four-bike trailer capacity.

Why it ranks #1: Carries up to four bikes at 30 pounds each on a 4- to 4.5-inch square bumper, with steel U-bolts and a supporting upright bar.

The Swagman RV Approved four-bike rack can carry one to four bicycles, letting larger travel groups use a single bumper-mounted carrier. Its steel U-bolts attach around 4–4.5-inch square RV bumpers, and the upright center bar adds support while towing.

The steel U-bolts secure the carrier around the specified bumper, while the upright center bar gives the bikes added support during towing. Its one-to-four-bike capacity allows the load to match the group, with a limit of 30 pounds per bicycle and 120 pounds total. The powder-coated steel construction is specified to resist corrosion. Fit is restricted: the product information rules out aluminum and spot-welded bumpers, so confirm the bumper type before installation.

Pros
  • Carries one to four bicycles
  • Supports up to 30 pounds per bike and 120 pounds total
  • U-bolts fit 4–4.5-inch square RV bumpers
  • Center upright adds bike support while towing
Cons
  • It is not for aluminum or spot-welded bumpers.

Skip it if you have an aluminum or spot-welded bumper; this rack is specified for square RV bumpers of another construction.

This fits larger travel groups carrying up to four bikes on a compatible steel RV bumper. Its 30-pound-per-bike and 120-pound-total limits matter, and aluminum or spot-welded bumpers are excluded.

Full product details
BrandSwagman
ColorBlack
Compatible with Vehicle TypeBicycle, Trailer
Included Componentsbike rack
Item Dimensions43 x 45 x 2.54 inches
Item Weight41 pounds
Dimensions43 x 45 x 2.54 inches
Load Capacity30 lbs per bike (120 lbs total)
ManufacturerSwagman
Part Number80600
Manufacturer Warranty DescriptionLimited Lifetime Warranty
Materialsteel
Model Number80600
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Swagman RV Approved 4 Bike RV Bumper Mount Rack

View on Amazon
ECOTRIC RV Bicycle Carrier

#2 · Flexible Capacity

2. ECOTRIC RV Bicycle Carrier

  • Weight: 39.7 lb
  • Material: Steel
  • Compatible with Vehicle Type: Trailer

Best for: Four-bike bumper capacity.

Why it ranks #2: Fits most RVs, campers, and trailers with 4- to 4.5-inch continuous-weld steel bumpers and carries one to four bikes at 30 pounds each.

Capacity for one to four bicycles is the ECOTRIC rack’s defining advantage, giving families or travel groups room to carry several bikes on an RV or camper trailer bumper. Each bicycle can weigh up to 30 pounds, and the rack fits continuous-weld steel bumpers measuring 4–4.5 inches.

The steel construction provides the rack’s supporting structure, while its black powder-coated surface is specified for use through weather such as rain and snow. That combination suits trips where the carrier remains on the trailer outdoors. Its stated one-to-four-bike capacity offers flexibility between carrying a single bicycle and loading a group, subject to the 30-pound-per-bike limit. Fit is specific: the supplied compatibility information calls for a 4–4.5-inch continuous-weld steel bumper, not simply any rear bumper.

Pros
  • Carries one to four bicycles on an RV or camper trailer bumper
  • Supports up to 30 pounds per bicycle
  • Fits 4–4.5-inch continuous-weld steel bumpers
  • Steel construction has a black powder-coated surface for weather exposure
Cons
  • The 39.7-pound listed item weight makes this a heavy rack to handle during installation.

Skip it if you need a lighter carrier to handle; the listed rack weight is 39.7 pounds, while Swagman 80605 is listed at 12 ounces.

This suits RV and camper owners carrying as many as four bicycles on a compatible steel bumper. Check the continuous-weld 4–4.5-inch bumper requirement and keep each bike within 30 pounds before choosing it.

Full product details
BrandECOTRIC
ColorBlack
Compatible with Vehicle TypeTrailer
Included Components1 x RV Bicycle Carrier Rack. Includes accessories and assembly instructions
Item Weight39.7 pounds
Manufacturer‎‎‎FAMETRADE LLC
Part NumberLYOM-256
MaterialSteel
Model NumberLYOM-256

Listed on Amazon as: ECOTRIC RV Bicycle Carrier Rack Camper Trailer Rear Bike Mount Rack

View on Amazon
Quick Products 2-Bike Rack

#3 · Adjustable Width

3. Quick Products 2-Bike Rack

  • Weight: 9.3 kg
  • Material: Alloy Steel
  • Dimensions: 22"L x 3"W x 26"H

Best for: Adjustable bike-width fit.

Why it ranks #3: Its adjustable mounting accommodates different bicycle lengths, while the two-bike limit is 30 pounds per bike; it excludes fat tires and wheels over 29 inches.

Adjustable mounting lets the Quick Products rack accommodate nearly any bicycle length, making it useful when two bikes do not share the same dimensions. It mounts to a 4–4.5-inch square bumper and supports up to 30 pounds per bicycle.

The two platforms provide the mounting points, while adjustable width lets the rack adapt to nearly any bicycle length. That flexibility still has defined limits: the product excludes fat-tire bicycles and bikes with wheels over 29 inches. Its all-steel construction and powder-coated finish suit a bumper-mounted setup, and the stated 30-pound capacity per bicycle gives buyers a load limit to apply to each of the two carried bikes.

Pros
  • Adjustable mounting accommodates nearly any bicycle length
  • Carries up to two bicycles
  • Supports up to 30 pounds per bicycle
  • All-steel construction with a powder-coated finish
Cons
  • It will not fit fat-tire bicycles or bicycles with wheels over 29 inches.

Skip it if you carry fat-tire bikes or bikes with wheels over 29 inches; this rack excludes both types.

Choose this for two bikes of differing lengths when the trailer has a 4–4.5-inch square bumper. Its fit boundary is important: fat-tire bicycles and bikes with wheels over 29 inches are excluded.

Full product details
BrandQuick Products
ColorBlack
Included ComponentsQuick Products QPRBM2R RV Bumper-Mounted 2-Bike Rack
Dimensions22"L x 3"W x 26"H
Item Weight9.3 kg
Load Capacity30 pounds
ManufacturerQuick Products
Part NumberQPRBM2R
MaterialAlloy Steel
Model Number0149.1471
Warranty Description2-year warranty
Wheel Size29 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Quick Products QPRBM2R RV Bumper-Mounted 2-Bike Rack with Adjustable Width and Stabilizer Post

View on Amazon
Swagman RV Approved 2 Bike Rack

#4

4. Swagman RV Approved 2 Bike Rack

  • Weight: 12 oz
  • Material: Alloy Steel
  • Dimensions: 26.5 x 21 x 2.5 in
  • Compatible with Vehicle Type: RV, Camper Trailer

Best for: Two-bike steel-bumper carrier.

Why it ranks #4: A straightforward two-bike option for 4- to 4.5-inch continuous-weld steel bumpers, with a stated 30-pound maximum per bike and alloy-steel construction.

A two-bike limit keeps the Swagman RV Approved rack focused on couples or smaller travel groups, while its U-bolt mounting targets 4–4.5-inch continuously welded steel bumpers. It carries up to 30 pounds per bicycle, giving buyers a clearly stated load limit for each bike.

The heavy-duty solid-steel construction provides the carrier structure, and the U-bolt mounting is specified for continuously welded steel bumpers in the 4–4.5-inch range. That fit requirement helps narrow compatibility before installation: it is not presented as a universal bumper rack. With room for up to two bikes and a 30-pound-per-bike maximum, it serves a compact travel load, while its 26.5-by-21-inch dimensions help buyers consider the space it occupies.

Pros
  • Carries up to two bicycles
  • Allows up to 30 pounds per bike
  • Fits 4–4.5-inch continuously welded steel bumpers
  • Heavy-duty solid-steel construction
Cons
  • Its two-bike capacity rules it out for travelers who need to carry three or four bicycles.

Skip it if you travel with three or four bikes; the ECOTRIC LYOM-256 carries up to four on a compatible steel bumper.

Choose this for a two-bike trip when the trailer has a 4–4.5-inch continuously welded steel bumper. Its defined two-bike capacity and per-bike weight limit are the key boundaries to check against your travel load.

Full product details
BrandSwagman
Colorblack
Compatible with Vehicle TypeRV, Camper Trailer
Included Componentsbike rack
Item Dimensions26.5 x 21 x 2.5 inches
Item Weight12 ounces
Dimensions26.5 x 21 x 2.5 inches
Load Capacity30 lbs per bike
ManufacturerSwagman
Part Number80605
Manufacturer Warranty DescriptionLimited Lifetime Warranty
MaterialAlloy Steel
Model Number80605

Listed on Amazon as: Swagman RV Approved 2 Bike RV Bumper Mount Rack – U-Bolt Mounted Carrier for Travel Trailers and RVs

View on Amazon
Kojem Around The Spare Rack

#5 · Higher Bike Limit

5. Kojem Around The Spare Rack

  • Weight: 15.4 lb
  • Compatible with Vehicle Type: Recreational Vehicle (RV), Trailer, Truck

Best for: Higher per-bike capacity.

Why it ranks #5: The two-bike carrier lists a 35-pound limit per bike, above the 30-pound limits listed for most picks, and fits most 4- to 4.5-inch bumpers.

A 35-pound limit per bicycle gives the Kojem carrier a higher stated per-bike allowance than a 30-pound limit, while its two-bike capacity keeps the load focused. It fits most RVs with 4–4.5-inch bumpers, according to the supplied fit information.

The automotive-grade steel construction provides the rack’s structure, and its powder-coated finish is specified to protect the surface and support durability. For trip planning, the two-bike capacity sets a clear ceiling, while the 35-pound-per-bike allowance accommodates bikes up to that listed weight. The fit information calls for 4–4.5-inch bumpers on most RVs; verify that your trailer’s bumper falls within that stated range before installation.

Pros
  • Carries two bicycles
  • Supports up to 35 pounds per bicycle
  • Specified for most RVs with 4–4.5-inch bumpers
  • Automotive-grade steel with a powder-coated finish
Cons
  • Its two-bike capacity cannot serve trips that require carrying three or four bicycles.

Skip it if you need to carry more than two bikes; the Swagman 80600 supports up to four on a compatible bumper.

The Kojem is suited to RV travelers carrying two bikes, especially when each is within the 35-pound limit. Its stated fit is for most RVs with 4–4.5-inch bumpers, so check that bumper range first.

Full product details
BrandKojem
Compatible with Vehicle TypeRecreational Vehicle (RV), Trailer, Truck
Included Components1 X bike carrier rack
Item Weight15.4 pounds
Load Capacity35 pounds
ManufacturerFAMETRADE LLC
Part NumberLYOM-255-Z2
Model NumberLYOM-255-Z2

Listed on Amazon as: Around The Spare RV Bike Rack for Travel Trailer Camper

View on Amazon
Swagman Around The Spare DLX

#6 · Spare-Tire Fit

6. Swagman Around The Spare DLX

  • Weight: 22 lb
  • Material: Alloy Steel
  • Dimensions: 34 x 12 x 26 in
  • Compatible with Vehicle Type: Bicycle

Best for: Spare-tire trailer setup.

Why it ranks #6: Designed to mount around most rear-mounted spare tires, it carries one or two bikes at up to 30 pounds each on compatible 4- to 4.5-inch steel bumpers.

Mounting around most rear spare tires is the Swagman Around The Spare DLX’s key advantage, providing a specified option for trailers where a spare occupies the rear area. It carries one or two bikes, with a maximum of 30 pounds per bicycle.

The around-the-spare mounting is intended for convenient installation on trailers with rear bumper-mounted spare tires, while the listed bumper fit is 4–4.5-inch square continuously welded steel. Anti-sway cradles help prevent bike-to-bike contact during transport, a useful feature when carrying two bikes together. The carrier supports up to 30 pounds per bike, so both the spare-tire arrangement and the bumper construction should be checked against the trailer before selecting it.

Pros
  • Mounts around most spare tires
  • Carries one or two bicycles
  • Anti-sway cradles help prevent bike-to-bike contact
  • Supports up to 30 pounds per bicycle
Cons
  • Its one-to-two-bike capacity is insufficient for trips requiring three or more bicycles.

Skip it if you need to carry three or four bicycles; the Swagman 80600 is rated for up to four.

This suits trailer owners whose rear spare tire shapes the rack choice and who carry one or two bikes. Check the 4–4.5-inch square, continuously welded steel bumper fit and 30-pound-per-bike limit.

Full product details
BrandSwagman
ColorBlack
Compatible with Vehicle TypeBicycle
Included ComponentsBike Rack
Item Dimensions34 x 12 x 26 inches
Item Weight22 pounds
Dimensions34 x 12 x 26 inches
Load Capacity6E+1 pounds
ManufacturerSwagman Bicycle Carriers
Part Number7 76214 80501 3
Manufacturer Warranty DescriptionLimited Warranty
MaterialAlloy Steel
Model Number80501

Listed on Amazon as: Swagman Around The Spare DLX – RV Bike Rack for Trailers with Rear Bumper Mounted Spare Tires

View on Amazon
Moxweyeni 2-Bike Bumper Rack

#7

7. Moxweyeni 2-Bike Bumper Rack

  • Weight: 6.6 lb
  • Material: Alloy Steel, Aluminum
  • Dimensions: 24.8 x 19.69 x 19.69 in
  • Compatible with Vehicle Type: Trailer

Best for: Two-bike U-bolt setup.

Why it ranks #7: This two-bike carrier uses U-bolts on 4- to 4.5-inch continuous-weld steel bumpers, but its supplied details do not state a per-bike weight limit.

A U-bolt mounting system gives the Moxweyeni carrier a specified connection to 4–4.5-inch continuous-weld steel RV bumpers, and it accommodates up to two bicycles. That combination suits travelers seeking a bumper-mounted option, provided they can arrange the professional tools its U-bolts require.

The stated U-bolt system connects the rack to a narrowly defined bumper type: 4–4.5-inch continuous-weld steel. Because installation requires professional tools, buyers should account for that setup requirement before a trip rather than assume a tool-free fitting process. The carrier is specified for two bicycles, and its steel-and-aluminum materials combine the listed frame materials in a 6.6-pound rack. Confirm the bumper construction and plan for the required tools as part of installation.

Pros
  • Carries up to two bicycles
  • U-bolt mounting for 4–4.5-inch continuous-weld steel bumpers
  • Steel and aluminum construction
  • Listed item weight is 6.6 pounds
Cons
  • The U-bolts require professional tools for installation.

Skip it if you need to install a rack without professional tools; this model’s U-bolts require them.

This is a fit for travelers carrying up to two bikes on a compatible continuous-weld steel bumper who can meet the professional-tool installation requirement. Check the bumper dimensions and construction before arranging the setup.

Full product details
BrandMoxweyeni
Colorblack
Compatible with Vehicle TypeTrailer
Included Components1 x RV Bumper Bike Rack
Item Dimensions24.8 x 19.69 x 19.69 inches
Item Weight6.6 pounds
Dimensions24.8 x 19.69 x 19.69 inches
ManufacturerMoxweyeni
Part NumberDD-Moxweyeni-3052
MaterialAlloy Steel, Aluminum
Model NumberDD-Moxweyeni-3052

Listed on Amazon as: Rv Bike Rack Bumper Mount Rack Camper Trailer 2 Bike Carrier

View on Amazon

Why bumper construction matters

A rack’s stated bumper fit does not establish that every trailer bumper can carry the loaded rack safely. Most models here specify a 4- to 4.5-inch continuous-weld steel bumper; the Swagman RV Approved 4 Bike Rack specifically calls for a square bumper and says it is not for aluminum or spot-welded bumpers. A matching width alone is not enough if the bumper’s construction or condition differs.

The rack and bicycles also add weight behind the trailer, where road movement can place changing forces on the mounting point. Before fitting any of these products, check the trailer maker’s guidance for bumper-supported loads and inspect the bumper and attachment area.

Do not treat a rack’s per-bike limit as proof that the trailer bumper itself can carry that total. When the trailer’s allowable load is unclear, confirm it with the trailer manufacturer or a qualified installer before carrying bikes.

Clearance and bike-fit checks before travel

Check the full rack-and-bike arrangement for clearance, especially if the trailer carries a rear spare tire. The Swagman Around The Spare DLX is specifically designed to mount around most spare tires, but its description does not promise clearance for every tire, wheel, or bike shape. Compare the rack’s mounting position with the spare and other rear equipment, then check that the bikes do not obstruct access or contact one another.

The Quick Products 2-Bike Rack provides adjustable width for different bicycle lengths, but it does not fit fat-tire bicycles or wheels over 29 inches. The other listings do not provide the same explicit wheel-size restriction, which is not a guarantee of compatibility with every bike.

Verify wheel and frame fit, tire width, and available clearance on your actual trailer before departure. Recheck mounting security after installation and during travel stops.

How to Choose a Travel-Trailer Bumper Rack

Bike capacity and per-bike limit

Choose a rack whose stated capacity covers your bike count and the weight of each bicycle. The Swagman RV Approved 4 Bike Rack carries up to four at 30 pounds per bike, while the ECOTRIC RV Bicycle Carrier carries one to four at the same per-bike limit. The two-bike models from Swagman and Quick Products also list 30 pounds per bike; Kojem lists 35 pounds per bike for its two-bike rack.

The Moxweyeni listing does not state a per-bike limit, so its carrying weight is harder to verify from the supplied details. Families carrying several lighter bikes may prefer the four-bike options, while two-bike travellers can choose a smaller-capacity rack.

If any bike exceeds its rack’s listed limit, choose another product rather than assuming the limit is flexible.

Bumper fit and mounting

Look for a rack that matches both the dimensions and construction of your trailer bumper. The ECOTRIC, Swagman two-bike, Swagman four-bike, and Moxweyeni listings specify 4- to 4.5-inch continuous-weld steel bumpers; Swagman’s four-bike model further specifies a square bumper and excludes aluminum or spot-welded bumpers. Quick Products says its rack mounts to a 4- to 4.5-inch square bumper, while Kojem describes compatibility with most RVs with 4- to 4.5-inch bumpers.

Buyers with a confirmed continuous-weld steel bumper have several direct-fit choices. If your bumper is a different size, construction, or shape, none of these descriptions confirms fit.

Check trailer-maker guidance on allowable bumper loads as a separate step.

Bike layout and trailer equipment

Match the rack layout to your bicycles and any equipment already mounted at the trailer’s rear. The Swagman Around The Spare DLX is intended to mount around most rear-mounted spare tires and carries one or two bikes, making it the clearest listed option for that arrangement. Quick Products offers adjustable mounting width for different bicycle lengths, but it excludes fat-tire bikes and wheels over 29 inches.

ECOTRIC offers capacity for one to four bicycles, while the other standard bumper options are listed for two. Buyers carrying bikes of varying lengths may value adjustable width; owners with a rear spare should examine the spare-specific design and check actual clearance.

Where the listing does not identify wheel or frame compatibility, verify the fit rather than assuming all bicycles will sit securely.

Which travel-trailer bumper rack should you choose?

Choose the Swagman RV Approved 4 Bike Rack if you need space for up to four bikes and have a compatible 4- to 4.5-inch square steel bumper. For one to four bikes with a stated continuous-weld bumper fit, the ECOTRIC RV Bicycle Carrier is a flexible alternative. Pick the Quick Products 2-Bike Rack if adjustable width suits your bicycles, provided they are not fat-tire models and their wheels do not exceed 29 inches.

The Swagman RV Approved 2 Bike Rack is a simple match for two bikes on the specified steel bumper. If a rear spare tire is part of your setup, consider the Swagman Around The Spare DLX and confirm clearance.

Kojem lists a 35-pound-per-bike limit; Moxweyeni fits the bumper category but does not list a per-bike limit.

Frequently Asked Questions

How can I tell whether my travel-trailer bumper can safely support a loaded bike rack?

Check the trailer and bumper documentation for the bumper’s construction and load limits, then compare those limits with the rack and loaded bicycles. Confirm that the rack’s stated bumper fit matches yours and that its mounting hardware suits the bumper. If the ratings or construction are unclear, ask the trailer manufacturer before installing a rack.

Do bikes need extra protection from bouncing or sway while a trailer is being towed?

Yes, secure each bicycle and check for movement before towing. Follow the rack’s instructions for straps, wheel restraints, or stabilizers, and make sure the rack itself is firmly mounted. Recheck the setup after a short drive and during stops.

A stabilizer can be useful, but it does not replace proper mounting or secure bike attachment.

How should I check that a rack and bicycles will clear a rear-mounted spare tire?

Measure the space available around the spare tire and compare it with the rack’s position and the bicycles’ dimensions. Check clearance with the rack installed and bikes loaded, including room for the tire cover and access needs. A spare-tire-specific rack may suit this setup, but confirm its fit with your trailer before buying.

What should I check before choosing an adjustable-width rack for my bikes?

Confirm that each bicycle fits the rack’s wheel and tire limits, and that the adjustable width can accommodate its frame or wheelbase as specified by the manufacturer. The Quick Products rack is listed for wheels up to 29 inches and is not suited to fat-tire bikes. Verify your bicycle dimensions before selecting it.

How do I compare bike capacity and weight limits between these racks?

Start with how many bikes you plan to carry, then check both the rack’s total capacity and its per-bike limit. The Swagman RV Approved 4 Bike Rack carries up to four bikes at 30 pounds per bike; Kojem lists 35 pounds per bike, while Moxweyeni does not list a per-bike limit. Confirm each bicycle’s weight.

Final Words

For the greatest listed capacity, choose the Swagman RV Approved 4 Bike Rack if your trailer has a compatible 4- to 4.5-inch square steel bumper and each bike is within its 30-pound limit. For fewer bikes, the Quick Products adjustable-width rack or Swagman two-bike rack may fit your needs. Consider ECOTRIC for its stated continuous-weld bumper fit, or a Swagman Around The Spare model when a rear spare is present.

Verify fit and clearance first.

Leave a Reply

Your email address will not be published. Required fields are marked *