Best Bar End Mirror for Bicycles and Motorcycles

#1 · Best Overall

1. BriskMore Bike Mirror

• Weight: 85 g
• Material: Glass, Nylon + 30% Glass Fiber
• Compatible with Vehicle Type: Scooter, elctric bikes, bicycles
• Size: 76mm

Best for: Wide-view bicycle commuters.

Why it ranks #1: Its 76 mm convex glass lens and 360-degree rotation with 180-degree adjustment suit flat and drop bars, with a stated 14–24 mm open-end fit.

A 76 mm automotive-grade convex glass lens gives this BriskMore mirror a larger stated viewing surface, helping bicycle and scooter riders check what is behind without relying on a smaller mirror. Its shatterproof film adds a protective layer, while 360-degree rotation and 180-degree adjustment let you direct the view to your riding position.

The universal design fits flat and drop bars, but installation requires open-ended grips and a handlebar inner diameter of 14–24 mm. Once mounted, the 360-degree rotation and 180-degree adjustment provide multiple ways to set the rear view, and the 76 mm lens supports a broader view behind. The included 4 mm hex key and cleaning cloth cover basic setup and lens care; the manual, foldable mirror weighs 85 g.

Skip it if you have closed grips or a bar outside the 14–24 mm range; Mirrycle Mountain Mirror fits 13.75–22.5 mm bar interiors.

Choose this for a bicycle or scooter when a large lens and extensive angle adjustment matter. Its fit is limited to open-ended grips and 14–24 mm inner diameters, so check those measurements before installation.

Listed on Amazon as: BriskMore Bike Mirrors,Bike Bar End Mirror, HD Glass Convex Lens Bicycle Rearview Mirror, Safe Cycling Rearview Mirror, Easy to Install

#2 · Most Compact

2. CATEYE BM-45

• Weight: 1.28 oz
• Material: Aluminum, Glass
• Compatible with Vehicle Type: Bicycle
• Size: One Size

Best for: Minimal-profile bicycle riders.

Why it ranks #2: This lightweight aluminum-and-glass bicycle mirror fits flat and drop bars and emphasizes nearly distortion-free viewing with minimal projection.

Minimal projection is the CATEYE BM-45’s defining feature, helping riders add a rearward view without giving up as much of a clean handlebar profile. Its nearly distortion-free glass lens supports clear viewing, while the lightweight aluminum-and-glass construction suits riders seeking a compact mirror for either drop or flat bars.

The BM-45 attaches to both drop and flat bars, making it useful across common bicycle handlebar styles. Its nearly distortion-free glass viewing surface helps keep the image clear, and the aluminum-and-glass construction is specified for durability. At 1.28 ounces, it is light, while the minimal-projection design limits how far the mirror extends from the bar. An included Allen key supports fitting, and the mirror is adjustable by hand.

Skip it if you require a stated inner-diameter range before buying; BriskMore BT-007A-1 lists a 14–24 mm range for open-ended bars.

Choose the BM-45 for a bicycle when low projection and broad drop-or-flat-bar compatibility are priorities. Its compact profile and glass lens suit streamlined setups, but the listing does not provide an inner-diameter fit range.

Listed on Amazon as: CATEYE BM-45 Bar End Mirror

#3 · Wide-View Option

3. Mirrycle Mountain Mirror

• Weight: 4 oz
• Material: Multi
• Compatible with Vehicle Type: Bicycle
• Size: 13.75mm to 22.5mm (0.54" to 0.875")

Best for: Simple bicycle bar-end setup.

Why it ranks #3: Its three-inch convex bicycle mirror pivots to any viewing angle and fits bar ends with stated inside diameters of 13.75–22.5 mm.

A three-inch convex mirror that pivots to any viewing angle gives the Mirrycle Mountain Mirror a straightforward way to monitor traffic behind a bicycle. It mounts inside the handlebar end, and the product description lists a broad 13.75–22.5 mm inner-diameter range, with a wrench included for installation.

The convex surface supplies a wide field of view, while its pivot lets riders direct the reflection toward their preferred riding position. The bar-end mounting keeps it attached at the handlebar end rather than requiring a separate handlebar clamp. Mirrycle lists a 13.75–22.5 mm inside-diameter fit and says installation takes minutes with the included wrench; this is a single mirror, not a left-and-right set.

Skip it if you want mirrors for both sides in one package; RBRL RL15E-2 includes left and right bicycle mirrors.

This single mirror suits bicycle riders seeking a pivoting, wide-view bar-end option with a stated inner-diameter range. Choose it for one-sided coverage; riders wanting a matched pair should look for a two-mirror package instead.

Listed on Amazon as: Mirrycle Mountain Mirror, Black

#4 · Best Drop-Bar Fit

4. Hafny Drop Bar Mirror

• Weight: 60 g
• Material: Glass
• Compatible with Vehicle Type: Bicycle
• Size: 6×5.5 cm

Best for: Drop-bar road cyclists.

Why it ranks #4: Designed specifically for drop bars, it uses an anti-glare convex glass lens, adjusts 360 degrees, and fits open ends measuring 16–24 mm.

Drop-bar-specific compatibility and an anti-glare convex glass lens define the Hafny HF-M956-FR06, giving road cyclists a mirror made for that bar style. The 360-degree adjustment allows aiming from either side, while its 16–24 mm inner-diameter range provides a concrete fit check for open-ended bars.

Hafny specifies a 16–24 mm handlebar inner diameter and asks that the bar end be open, so those details determine whether it can be mounted. The 360-degree adjustment supports placement on either the left or right side, although the package contains one mirror. The glass lens is described as anti-glare and shatter-proof, and the mirror weighs 60 g, keeping the single-mirror setup lightweight for drop-bar riding.

Skip it if you want a left-and-right set in one purchase; RBRL RL15E-2 includes both bicycle mirrors.

This is for drop-bar cyclists who want a lightweight glass mirror and freedom to position it on either side. It includes one mirror and requires an open bar end measuring 16–24 mm inside.

Listed on Amazon as: Hafny Drop Bar Bike Mirror, HD Automotive Grade Glass, Shatter-Proof, Super Convex Lens, Bar End Mirror, Cycling Mirror, HF-M956-FR06 (Silver Glass)

#5 · Largest Bicycle Lens

5. RBRL Bicycle Mirror

• Weight: 286 g
• Material: Automotive-grade glass
• Compatible with Vehicle Type: Flat handlebar mountain bikes, E-bikes,City…
• Size: Flat bar Ø15–20mm

Best for: Wide-view flat-bar cyclists.

Why it ranks #5: The paired mirrors use extra-large 124 × 67 mm automotive-grade glass and include expansion bolts for flat handlebars with 15–20 mm inner diameters.

The 124 × 67 mm glass mirror gives the RBRL bicycle pair an extra-large viewing surface, helping riders see more of the area behind them. Its listed fit covers flat handlebars with 15–20 mm inner diameters, and the included left-and-right mirrors let compatible bicycle and e-bike riders set up both sides.

The large glass surface is intended to provide a wide-angle rear view that is less easily blocked, which can help riders monitor traffic while keeping their attention ahead. Fit is specific to flat bars with 15–20 mm inner diameters; two expansion-bolt sizes cover 15–17.5 mm and 17.5–20 mm. The package includes left and right mirrors, a 4 mm hex wrench, dust cap, and instructions for setup and basic upkeep.

Skip it if you ride drop bars or have a bar outside 15–20 mm; CATEYE BM-45 fits both drop and flat bars.

Choose this pair for a flat-bar bicycle, e-bike, city bike, or scooter when a large rear-view surface and two-sided setup matter. It is not a universal bar fit: the stated range is 15–20 mm inner diameter.

Listed on Amazon as: RBRL Bicycle Mirror, Extra Large Bike Mirror, 360° Adjustable Shatterproof and Durable Bar End Rear View Mirror Bicycle, Side Mirrors for E-Bike (left+right)

#6

6. Sprintech Drop Bar Mirror

• Weight: 2.08 oz
• Material: Plastic
• Compatible with Vehicle Type: Bicycle
• Size: Single

Best for: Single-side drop-bar commuters.

Why it ranks #6: This bicycle mirror is made for drop handlebars and replaces the end cap during installation; its listed material is plastic rather than glass.

A cap-replacement installation gives the Sprintech mirror a direct route onto compatible drop handlebars: remove the end cap, then fit the mirror’s male insert into the female cap receptor. Its single-mirror format suits riders seeking one-sided rear visibility, and the product is described as holding position rather than rattling or spinning out.

The end-cap replacement process integrates the mirror at the drop-bar end, with the male insert fitting into the female receptor after the original cap is removed. Sprintech describes the mirror as staying in position when other brands may rattle or spin, which matters for maintaining a set viewing angle during rides. It is a single, left-side mirror made from plastic, and its listed shatter-resistant feature adds a stated durability consideration.

Skip it if you ride flat bars or need mirrors for both sides; RBRL RL15E-2 is a left-and-right flat-bar bicycle set.

Choose this for a drop-bar commuter or road cyclist who wants a single left-side mirror integrated at the bar end. Its end-cap installation is specific to drop bars, and the package does not cover both sides.

Listed on Amazon as: Sprintech Drop Bar Bike Mirror – Road Bike Rear View Mirror for Drop Handlebars – Bar End Bicycle Mirror, Swiss-Made (Black, Left Single)

#7

7. MICTUNING Motorcycle Mirrors

• Material: Aluminum
• Compatible with Vehicle Type: Street-Cruiser-Motorcycles
• Size: 3" Round Style

Best for: Foldable cruiser motorcycle pair.

Why it ranks #7: The pair has 3-inch convex glass lenses, a 360-degree foldable joint, and a specific fit requirement for standard 7/8-inch motorcycle handlebars.

A foldable design with 360-degree adjustment makes the MICTUNING pair adaptable when riders need to reposition the mirrors or fold them away. Each 3-inch convex glass mirror provides a wide-angle rear view, and the listing specifies standard 7/8-inch, or 22 mm, handlebars for street-cruiser motorcycles.

The stated 7/8-inch handlebar requirement gives buyers a specific fit to check before installation; these mirrors are only suitable for that standard size. Once mounted, the ball-type joint rotates 360 degrees for view adjustment, and the foldable design helps when the mirror position needs to change. The pair includes left and right mirrors, each with a 3-inch convex glass lens, combining two-sided coverage with a wide-angle rear view.

Skip it if you have a handlebar size other than 7/8 inch; KEMIMOTO MU-F0804-00202BK lists several mounting methods and bar sizes.

This is a practical choice for street-cruiser riders with standard 7/8-inch handlebars who want a matching pair and foldable adjustment. Its clearly specified size is also its boundary: other bar diameters are outside the stated fit.

Listed on Amazon as: MICTUNING Universal Motorcycle 7/8" (22mm) Bar End Rear View Mirrors

#8

8. KEMIMOTO Billet Mirrors

• Material: Aluminum
• Compatible with Vehicle Type: Motorcycle
• Size: 3.9 in by 3.9 in

Best for: Adjustable motorcycle pair.

Why it ranks #8: This motorcycle pair combines billet aluminum brackets with glass lenses and 360-degree adjustment, though the supplied fit details are less specific.

A full 360-degree ball-type adjustment gives the KEMIMOTO motorcycle mirrors flexibility to aim the view around different riding positions. The pair includes one left and one right mirror, so riders can equip both sides together, while billet aluminum brackets and glass lenses provide the stated construction for motorcycle use.

The 360-degree rotation lets riders reposition each mirror to suit their view, while the included left-and-right pair avoids sourcing a second side separately. Billet aluminum brackets paired with glass lenses are the listed construction, and the manual operation keeps adjustment direct. KEMIMOTO lists compatibility with motorcycles and names Sportster, Softail, Dyna, Road King, and Shadow among the compatible families; verify the specific mounting arrangement for your handlebar.

Skip it if you need a stated bar-end diameter range before purchase; MICTUNING MIC-HBSM-190 specifies standard 7/8-inch handlebars.

This pair suits motorcycle riders who want both sides and flexible ball-joint aiming, especially riders of the named motorcycle families. The listing gives no mounting-diameter range, so it is less suitable when exact bar-end sizing is essential.

Listed on Amazon as: KEMIMOTO Motorcycle Bar End Mirrors, 360 Degrees Ball-Type Adjustment, Billet Aluminum Handlebar Mirrors compatible for Sportster, Softail, Dyna, Road King, Shadow, Universal Motorcycle Accessories

#9

9. KEMIMOTO Universal Mirrors

• Weight: 1.4 lb
• Material: Metal
• Compatible with Vehicle Type: Motorcycle
• Size: Round

Best for: Multi-mount motorcycle riders.

Why it ranks #9: Its motorcycle mounting options include 13–21 mm hollow bar ends, 22 mm outer-diameter center mounts, and 8 mm end threads, but compatibility exclusions require checking.

Three listed mounting approaches give the KEMIMOTO motorcycle mirror options for compatible handlebars: 13–21 mm hollow bar ends, 22 mm center mounting, or 8 mm end threads. Its 360-degree rotatable design supports view adjustment, while the aluminum-alloy case and bracket form the listed mirror construction.

The mounting choice depends on the bar: expansion mounting requires a hollow 13–21 mm interior with end caps removed, center mounting uses a 22 mm outside-diameter bar, and screw mounting uses 8 mm end threads. This flexibility can serve different compatible setups, but the listing excludes numerous Yamaha models and specifies that solid or baffled bars do not suit expansion mounting. The aluminum-alloy case and CNC bracket provide the stated metal construction.

Skip it if your motorcycle is one of the listed excluded Yamaha models; KEMIMOTO mirror082bk is a different motorcycle mirror option.

Choose this for a motorcycle whose bar matches one of the three listed mounting methods and whose model is not excluded. Its mounting flexibility is useful, but expansion mounting specifically requires a hollow, unbaffled bar.

Listed on Amazon as: KEMIMOTO Universal Motorcycle Mirrors, 360° Rotatable Motorcycle Handlebar Bar End Rear View Side Mirrors, Compatible with 7/8 in Handlebar and 0.51-0.83in (13mm-21mm) Bar Inner Diameter

#10

10. FENRIR CNC Mirrors

• Weight: 0.79 kg
• Material: Aluminum alloy
• Compatible with Vehicle Type: Off-Road-Motorcycles…
• Size: 801-0324

Best for: Cafe racer mirror pair.

Why it ranks #10: This motorcycle pair is intended for 22 mm handlebars and several motorcycle styles, but some models may need extra adapters and installation needs careful tightening.

A CNC aluminum-alloy construction and a supplied left-and-right pair make the FENRIR mirrors a two-sided motorcycle option for cafe racer and other listed bike styles. The mirrors use blue lenses and are listed for several motorcycle categories, while the installation notes call attention to tightening the stem screws securely.

The aluminum-alloy construction gives the pair a metal build, and the stated shockproof feature is relevant for motorcycle use. Included blue-lens mirrors cover both left and right sides. The listing names off-road, street-cruiser, scooter, sport, and touring motorcycles, but notes that some models may need additional adapters. Installation guidance stresses tightening the three screws—even when they extend beyond two threads—before adjusting the mirror angles.

Skip it if you need a mirror with a stated handlebar mounting range; MICTUNING MIC-HBSM-190 specifies standard 7/8-inch bars.

This pair suits riders seeking blue-lens mirrors with metal construction across the listed motorcycle categories. Check whether your specific model needs an adapter, and follow the screw-tightening guidance before setting the viewing angle.

Listed on Amazon as: FENRIR CNC Aluminum Alloy Cafe Racer Black Motorcycle Bar End Mirrors Side 22mm 7/8" inch Handlebar Mirror Universal Rear View For M8/M6 Standard Super Sport Naked Street Bike Cruiser Minimoto Scooter