Best Atv Storage Lifts For Garage: Compare 10 Options

#1 · Best Overall

1. ZEEVIUMFT ATV Lift Table

• Dimensions: 106 x 48 x 33.5 in
• Load Capacity: 1500 lb

Best for: Wide table for ATVs and equipment.

Why it ranks #1: Its 48-inch deck, 106-inch extended length, and 1,500-pound capacity are specified for ATVs and UTVs, with a lift range reaching 33.5 inches.

A 48-inch reinforced-steel deck and stated compatibility with ATVs, UTVs, motorcycles, and lawn tractors make the ZEEVIUMFT table a broad-use garage lift. With the front extension installed, its platform reaches 106 inches long, offering clearance for long-wheelbase machines within its 1,500-pound limit.

The extra-wide deck provides a stable surface for the listed range of vehicles and power equipment, while the front extension adds length for longer machines. The included ramp, front stop, fixed and movable clamp, and anti-slip mat support the loading and positioning workflow. Its 1,500-pound capacity is the load boundary for choosing a vehicle. This is a floor-mounted lift table for maintenance access; the supplied details do not establish an air-pressure requirement or a lift-height range.

Skip it if you need a stated height range before choosing a lift; the VIVOHOME VH049 specifies adjustment from 4.5 to 14.8 inches.

Choose this for a garage owner lifting a compatible ATV, UTV, motorcycle, lawn tractor, or power-equipment load up to 1,500 pounds. Its broad deck and extension suit longer machines, but verify that its unspecified height range meets your work needs.

Listed on Amazon as: 1,500 LB ATV/Motorcycle Lift Table – Heavy-Duty Air/Hydraulic Power Lift, Extra-Wide 48" Platform, Ergonomic Stand-Up Installation, Bonus Jack, Fits ATV/UTV/Motorcycle/Lawn Tractors

#2 · Wide ATV Platform

2. Black Widow ATV Lift Table

• Dimensions: 78 x 47 x 33.5 in
• Weight: 540 lb
• Load Capacity: 1500 lb
• Material: Steel

Best for: Air-powered ATV service table.

Why it ranks #2: Built for ATVs up to 1,500 pounds, its 78-by-47-inch platform rises from 6.75 to 33.5 inches using an air-over-hydraulic system.

The Black Widow table raises an ATV weighing up to 1,500 pounds from 6.75 to 33.5 inches using an air-over-hydraulic system, giving a garage owner a substantial service-height range. Its 78-by-47-inch platform and built-in tie-down points support a dedicated ATV loading and lifting workflow.

A compressed-air foot pedal operates the hydraulic ram, so lifting depends on an air supply of at least 90 PSI and a compressor is not included. The platform measures 78 by 47 inches, and the stated 1,500-pound capacity sets the vehicle limit. Built-in tie-down points provide locations for safety straps, but straps are not included. The 540-pound table is a substantial floor installation, suited to a dedicated service area rather than a movable garage storage hoist.

Skip it if you lack a 90 PSI air supply; the VEVOR ZX0901-7B uses foot-operated hydraulic lifting instead of compressed air.

This fits an ATV owner with a dedicated service area, a compressor supplying at least 90 PSI, and a machine within the 1,500-pound limit. Allow for the table's 540-pound weight, and source straps separately for tie-down use.

Listed on Amazon as: Black Widow Air Over Hydraulic ATV Lift Table, 1,500 lb Cap, 33.5" H Lift

#3 · Best Portable Jack

3. VEVOR Hydraulic Lift Jack

• Dimensions: 33.1 x 16.1 x 4.7 in
• Weight: 58 lb
• Load Capacity: 1500 lb
• Material: Steel

Best for: Hydraulic lift for powersports garages.

Why it ranks #3: This portable, wheeled hydraulic jack supports 1,500 pounds and lists ATV, UTV, and motorcycle compatibility, with ratchet belts and a three-position safety pin.

The VEVOR hydraulic lift combines a 1,500-pound rating with foot-operated raising, giving a garage owner a hands-free-at-the-handle way to lift a standard motorcycle, ATV, or UTV for service. Its included ratchet belts and three-position safety pin add securing and height-locking provisions to the floor-lift workflow.

The steel lift supports up to 1,500 pounds and is listed for motorcycles, ATVs, powersports vehicles, and UTVs, so it addresses more than motorcycle-only service. Foot operation raises the platform without a hand crank, while the three-position safety pin provides set locking positions. Two ratchet belts are included to secure the vehicle during work. At 33.1 inches long and 16.1 inches wide, it needs a planned floor space and is not a ceiling-mounted storage rack.

Skip it if you need overhead storage that frees the floor; the YAKYGIBT 400-pound ceiling hoist is intended for that storage approach.

Choose it for a garage owner lifting a compatible motorcycle, ATV, or UTV for maintenance, with the included belts and safety-pin positions supporting the work setup. It remains a floor lift, so plan for its footprint and vehicle loading.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Jack 1500 LBS Capacity ATV Scissor Lift Jack Portable Motorcycle Lift Table with 4 Wheels Hydraulic Foot-Operated Hoist Stand for Motorcycle ATV UTV Powersports

#4 · Foot-Pedal Lift

4. VIVOHOME Hydraulic Lift Jack

• Dimensions: 14 x 27.5 x 15 in
• Weight: 59.4 lb
• Load Capacity: 1500 lb
• Material: Alloy Steel, Rubber

Best for: Hydraulic lift for higher-capacity service.

Why it ranks #4: The hydraulic foot-pedal jack supports ATVs up to 1,500 pounds and lifts from 4.5 to 14.8 inches; check the listed minimum ground clearance.

A foot-pedal hydraulic system raises the VIVOHOME lift to 14.8 inches and supports up to 1,500 pounds, giving a garage owner a higher-capacity service jack for motorcycles, dirt bikes, and ATVs. Its stated 4.5-inch minimum ground clearance is a key fit requirement before choosing it.

The hydraulic pedal operation raises the platform from 4.5 to 14.8 inches, which lets a user service tires, chains, forks, and undercarriages without kneeling on the floor. Its 1,500-pound capacity covers the listed range of motorcycles, dirt bikes, scooters, and ATVs when they meet the clearance requirement. Two straps are included to secure the vehicle. Full lower fairings are explicitly unsuitable, so clearance and lower-body shape matter when planning a lift.

Skip it if you need a ceiling hoist rather than a floor service stand; the YAKYGIBT overhead system stores gear above the garage floor.

This is for owners servicing a compatible motorcycle, dirt bike, scooter, or ATV that weighs no more than 1,500 pounds and clears 4.5 inches. Avoid it for full-lower-fairing models or overhead vehicle storage.

Listed on Amazon as: VIVOHOME 1500 LBS Hydraulic Motorcycle Lift Jack

#5

5. ZEEVIUMFT Motorcycle Lift Table

• Dimensions: 106 x 24 x 33.5 in
• Load Capacity: 1500 lb
• Material: Steel

Best for: Wide motorcycle lift-table workspace.

Why it ranks #5: Its 48-inch-wide platform and 1,500-pound capacity may suit some ATV owners, but the supplied compatibility specification lists motorcycles rather than ATVs.

A 48-inch-wide platform and 1,500-pound capacity give the ZEEVIUMFT motorcycle table room to support a heavy motorcycle for garage maintenance. Its pneumatic foot pedal raises the platform from 7 to 31.25 inches across eight positions, enabling adjustable work height when a 90–110 PSI air supply is available.

The 106-by-48-inch platform provides a broad working surface, while the supplied ramp and front stop help form a motorcycle loading setup. The pneumatic foot pedal offers eight height positions from 7 to 31.25 inches, giving the user options for service access. The 1,500-pound rating sets the load boundary, and the required 90–110 PSI air supply means an air compressor must be available separately. Its listed vehicle compatibility is motorcycle, not ATV or UTV.

Skip it if you need a lift listed for ATVs and UTVs; the ZEEVIUMFT Zee-PROLIFT-ATV specifies those vehicle types.

This suits a motorcycle owner seeking a wide, adjustable service table and who has access to a 90–110 PSI compressor. Its listed compatibility is motorcycle, so ATV owners should choose a model that names their vehicle type.

Listed on Amazon as: 1500 LB Motorcycle Lift Table, Heavy Duty Air/Hydraulic ATV Lift with Side Extensions, 48" W x 33.5" H, User-Friendly Installation Design with Motorcycle Jack, Fits Harley/Indian/Custom

#6

6. VIVOHOME 1100-Lb Lift

• Dimensions: 14.57 x 9.06 x 4.33 in
• Weight: 30.8 lb
• Load Capacity: 1100 lb
• Material: Rubber, Steel

Best for: Mobile lift for mixed small vehicles.

Why it ranks #6: The compact crank jack explicitly lists ATV compatibility and supports 1,100 pounds, with four swivel casters and a 5.1-to-15.8-inch lift range.

Four swivel casters, including two with locking brakes, let the VIVOHOME 1,100-pound scissor lift roll into position and stay secured for service. Its listed compatibility spans ATVs, dirt bikes, motorcycles, and scooters, making it a versatile floor-level option for a garage with several small vehicles.

The reinforced-steel frame and ribbed scissor structure support up to 1,100 pounds, while the crank handle raises the lift from 5.1 to 15.8 inches. That height range gives a mechanic working clearance for service without requiring a powered lift. Four swivel casters help with positioning, and the two locking brakes help keep the jack in place during use. It arrives ready to use with no assembly required, although it remains a floor lift rather than ceiling storage.

Skip it if you want a high work platform for standing service; the ZEEVIUMFT 48-inch ATV table offers a much taller table format.

This suits garage owners who need a ready-to-use mobile jack for an ATV, dirt bike, motorcycle, or scooter. Choose it for modest service elevation and easy repositioning, not overhead storage or a tall work platform.

Listed on Amazon as: VIVOHOME Motorcycle Lift 1100 Lbs Scissor Lift Jack with Dolly Wheels

#7

7. Nilight 1100-Lb Lift

• Dimensions: 8.7 x 14.2 x 15.7 in
• Weight: 35 lb
• Load Capacity: 1100 lb
• Material: Heavy Duty Steel

Best for: Stable wheeled motorcycle service jack.

Why it ranks #7: This steel scissor jack lists ATV compatibility and a 1,100-pound capacity, plus four swivel casters and a removable crank handle for positioning and lifting.

A double-crossbar steel X-frame and interior runners give the Nilight scissor jack a stability-focused structure for lifting motorcycles or dirt bikes up to 1,100 pounds. Its four swivel casters and removable T-handle let a garage owner move the jack and crank it into position for repair or cleaning.

The steel lift has a stated 1,100-pound capacity, and its crank handle adjusts the height from 5.1 to 15.7 inches. That range supports floor-level service without committing to a large lift table. The double-crossbar X-frame and interior runners are specified for stability and strength, while the four solid swivel casters support moving heavy equipment around a shop or garage. It is a wheeled service jack, so it does not create overhead storage space.

Skip it if you need a raised workbench-height platform; the ZEEVIUMFT Zee-PROLIFT-ATV is a full lift table with a 48-inch deck.

Pick this for a garage or track owner who wants a wheeled crank jack for motorcycle or dirt-bike repair and cleaning. Its compact scissor format favors moving equipment around, not storing an ATV above the floor.

Listed on Amazon as: Nilight Motorcycle Lift 1100 LBS ATV Scissor Lift Jacks with Dolly Wheels Crank Handle 5.1"-15.7" Hoist Stand Heavy Duty Steel Lifter Jack for Motorcycles Dirt Bike Garage Storage Repair Tool, Black

#8

8. VEVOR 1100-Lb Scissor Lift

• Dimensions: 18.1 x 17.3 x 4.9 in
• Weight: 41 lb
• Load Capacity: 1100 lb
• Material: Steel

Best for: Crank-lift motorcycle garage bays.

Why it ranks #8: Its 1,100-pound capacity and wheeled scissor-jack format could suit smaller machines, but the listed vehicle compatibility names motorcycles, not ATVs.

The VEVOR scissor jack pairs an 1,100-pound capacity with a hand crank, letting a garage owner raise a compatible motorcycle for maintenance or cleaning without relying on a hydraulic foot pump. Its dolly and wide deck make this a movable service lift rather than an overhead storage hoist.

The steel scissor frame supports up to 1,100 pounds, with stated compatibility for street, cruiser, and touring motorcycles. The hand-crank operation provides a manual way to raise the bike, while the included dolly and casters support repositioning around a garage. A tool tray keeps small items close during service, and the 18.1-by-17.3-inch dimensions give buyers a concrete footprint to plan around. This is a floor jack for bike work, not a ceiling-mounted storage system.

Skip it if you need a ceiling-mounted platform to clear garage floor space; this is a wheeled floor jack for motorcycle service.

Choose it for garage owners who want a crank-operated lift to service a compatible street, cruiser, or touring motorcycle. Its compact floor-jack format suits maintenance, but it does not suspend an ATV overhead for long-term storage.

Listed on Amazon as: VEVOR Motorcycle Lift 1100lbs ATV Scissor Lift Jack with Dolly & Hand Crank | Garage Repair Center Hoist Crank Stand with Wide Deck and Tool Tray for Street Bikes, Cruiser Bikes, Touring Motorcycles

#9

9. Maxsa 350-Lb Lift

• Weight: 64.8 lb

Best for: High-rise stand for light bikes.

Why it ranks #9: The tall foot-pump stand reaches 34.25 inches, but its 350-pound capacity limits it to dirt bikes, scooters, and light ATVs.

The Maxsa Innovations stand raises a supported vehicle from 13.78 to 34.25 inches with a foot pump, putting a dirt bike, scooter, or light ATV higher for maintenance without electricity. Its 350-pound limit makes it a specialized choice for lighter machines rather than a general-purpose ATV lift.

The foot-operated hydraulic pump raises the stand through a 20-inch-plus range, reducing repeated bending during maintenance. A reinforced scissor structure, worm gear transmission, safety pin, J-hook, locking pole, and bolt are listed as support and securing features intended to help prevent shifting or accidental lowering. The capacity is 350 pounds, so vehicle weight is the decisive constraint. This stand supports floor-level repair access; it does not provide a ceiling-mounted storage platform or lift a full-size heavy ATV.

Skip it if you lift a machine above 350 pounds; the VEVOR ZX0901-7B hydraulic lift is rated for 1,500 pounds.

This fits an owner maintaining a dirt bike, scooter, or light ATV weighing no more than 350 pounds who values foot-pump elevation. Check the machine's weight first, and choose another lift for heavier vehicles or overhead storage.

Listed on Amazon as: Hydraulic Motorcycle Lift Jack, 350 Lb Foot Pump Scissor Stand

#10

10. YAKYGIBT Ceiling Hoist

• Dimensions: 5.1"D x 3.93"W x 7.08"H
• Material: Alloy Steel

Best for: Ceiling storage for bulky garage gear.

Why it ranks #10: This 400-pound overhead hoist frees ceiling space for gear but is listed without a platform and is not an ATV vehicle lift.

A hand-crank pulley system rated for 400 pounds lifts bulky gear toward the ceiling, freeing garage floor space for an ATV or other vehicle. The YAKYGIBT hoist is intended for bikes, kayaks, bins, tools, and seasonal items, but its listing explicitly says no platform is included.

The dual-rope structure and pulley system are specified to improve balance and security while lifting stored items, and the hand crank provides manual control over the hoist. Its 400-pound capacity gives a stated ceiling for the stored load. Because the platform is not included, buyers need a suitable way to support the items they intend to raise; the hoist itself is not an ATV repair table. It is a storage-space solution for garage gear, not a vehicle service lift.

Skip it if you want to raise an ATV for wheel or undercarriage repairs; the VIVOHOME VH049 is a floor hydraulic service lift.

Choose this for a garage owner storing suitable gear overhead to reclaim floor space, with the load kept within 400 pounds. Since there is no platform, plan the support arrangement; this is not an ATV lift table.

Listed on Amazon as: Overhead Garage Storage Lift Hoist, 400 lbs Ceiling Garage Hoist System with Hand Crank, Heavy Duty Double Rope Pulley Lift, Adjustable Garage Organizer for Bikes, Kayaks & Storage Bins (No Platform)