Best 5 Lug Hub For Trailer: Compare 10 Hub Kits

#1 · Best Overall

1. Saree 5-Lug 4.5-Inch Kit

• Weight: 17.73 lb
• Package Dimensions: 14.45 x 8.5 x 5.55 in

Best for: EZ-Lube Axle Replacement.

Why it ranks #1: Specifies a 3,500 lb axle, 5-on-4.5-inch pattern, #84 tapered spindle, and L44649 and L68149 bearings, with individual protective packaging.

Compatibility with L44649 outer and L68149 inner bearings gives the Saree kit a concrete fit reference for 3,500-pound EZ-Lube axles. Its two sets use a 5-on-4.5-inch pattern and fit #84 tapered spindles from 1-1/16 to 1-3/8 inches, supporting a targeted paired replacement.

The named bearing models help buyers compare the existing hub components rather than relying only on the axle rating. Saree lists compatibility with Dexter, Al-Ko, Lippert, Quality, and other 3,500-pound axle brands, while the tapered-spindle requirement rules out straight-spindle applications. Two separately boxed sets are specified, which makes the package straightforward to divide between two hub positions. Verify both the bearing models and the 4.5-inch pattern before installation to avoid selecting a kit with the wrong interface.

Skip it if you need a straight-spindle hub; this kit specifies tapered spindles, while AIUWIZO B0G8GZPVNG also requires a tapered spindle.

This Saree kit suits owners replacing two hubs on a compatible 3,500-pound EZ-Lube axle who can match the named bearings and 5-on-4.5-inch pattern. Its tapered-spindle-only fit is the key boundary to check first.

Listed on Amazon as: 2 Sets 3500Lb Trailer Hub Kit 5×4.5" for 1-1/16"-1-3/8" Tapered Spindle

#2 · Best Corrosion Protection

2. iBroPrat Galvanized Hub Kit

• Weight: 16.96 lb
• Package Dimensions: 13.11 x 7.13 x 6.14 in

Best for: Galvanized Boat-Trailer Hubs.

Why it ranks #2: Its hot-dip galvanized finish is specifically described as offering seawater corrosion resistance, and the kit fits a 3,500 lb #84 spindle.

Hot-dip galvanizing is the iBroPrat kit’s defining feature, with the listing citing better resistance to seawater corrosion than black spray paint. The two-set idler-hub package fits 3,500-pound axles with a 5-on-4.5-inch pattern and #84 tapered spindles from 1-1/16 to 1-3/8 inches.

For buyers using a trailer around seawater, the stated corrosion resistance gives the galvanized finish a practical rationale. Pre-installed accessories and grease-pre-lubricated bearings can also reduce parts preparation during replacement. The specified L44649 and L68149 bearings provide additional compatibility checks alongside the 5-on-4.5-inch pattern and #84 tapered-spindle dimensions. This is an idler hub kit for a 3,500-pound trailer axle, and the listed tapered-spindle fit excludes straight spindles; match the existing setup before installation.

Skip it if you have a 5-on-5 pattern; GREPSPUD B0C48DV8X4 offers that pattern for its specified 3,500-pound tapered-axle application.

Choose iBroPrat if your 3,500-pound trailer has the listed tapered-spindle fit and you value the stated hot-dip galvanized corrosion resistance. Verify the bolt circle and bearing models; straight spindles are excluded.

Listed on Amazon as: 2Sets Galvanized Trailer Idler Hub Kits 5 Bolt 4.5 for 3500 lb

#3 · Best Pre-Greased

3. Redants Pre-Greased Hub Kit

• Weight: 17.73 lb
• Package Dimensions: 14.57 x 8.39 x 5.47 in

Best for: Pre-Greased Pair Replacement.

Why it ranks #3: The bearings and grease seals are pre-assembled and lubricated, and the 5-on-4.5-inch kit fits 1-1/16 to 1-3/8-inch #84 tapered axles.

Pre-assembled, grease-lubricated bearings and seals are the Redants kit’s clearest practical advantage, helping reduce preparation before fitting the hubs. The two-set package targets 3,500-pound #84 tapered axles with a 5-on-4.5-inch pattern and spindle dimensions from 1-1/16 to 1-3/8 inches.

With bearings and grease seals already assembled and lubricated, the kit is aimed at a more direct replacement workflow than one requiring those components to be prepared separately. Redants also states that the necessary installation parts are included, so buyers can work from the supplied kit rather than source listed components individually. The fit remains specific: a 3,500-pound axle, #84 tapered spindle, and 5-on-4.5-inch pattern are required. Match those details before relying on the pre-lubricated convenience.

Skip it if you have a straight spindle or different bolt pattern; Saree B0D4545Q6H also requires tapered spindles but may suit a verified 5-on-4.5 setup.

Redants suits owners replacing hubs on a matching 3,500-pound tapered axle who want bearings and seals supplied pre-assembled and greased. Confirm the #84 spindle dimensions and 5-on-4.5-inch pattern before choosing it.

Listed on Amazon as: Redants 2 Sets 3500 LB Trailer Hub Kit, 5 Lug 4.5" Bolt Pattern Trailer Hub, Pre-Assembled & Greased for Easy Installation, Fits 1-1/16" to 1-3/8" Spindles (#84)

#4

4. GREPSPUD Pre-Lubricated Kit

• Weight: 16.11 lb
• Package Dimensions: 13.11 x 7.91 x 6.3 in

Best for: Pre-Lubricated EZ-Lube Axles.

Why it ranks #4: Fits 3,500 lb #84 tapered EZ-Lube spindles and names both L44649 and L68149 bearings; its listing says bearings and seals arrive pre-lubricated.

Pre-lubricated bearings and grease seals give this GREPSPUD kit a ready-to-install emphasis for compatible EZ-Lube axle repairs. It fits 3,500-pound #84 tapered spindles from 1-1/16 to 1-3/8 inches, and specifies L44649 outer and L68149 inner bearings for fit checking.

The pre-assembled, grease-lubricated bearings and seals can simplify preparation before installation, while the named L44649 and L68149 models give buyers an additional way to match the kit to existing parts. GREPSPUD specifies a 5-on-4.5-inch pattern and explicitly excludes straight spindles, making both pattern and spindle type essential checks. Its stated fit targets 3,500-pound EZ-Lube #84 tapered axles; measuring the five-lug pattern from the outer edge of one hole to the opposite hole’s center helps avoid a center-to-center error.

Skip it if you need a 5-on-5 hub; GREPSPUD B0C48DV8X4 specifies that pattern, though its spindle and axle requirements still need to match.

Choose this GREPSPUD kit for a compatible 3,500-pound EZ-Lube axle when pre-lubricated bearings and seals support your repair workflow. Its tapered-spindle-only fit and 5-on-4.5-inch pattern define the boundaries.

Listed on Amazon as: 5×4.5 Trailer Hub Kits for 3500lb 1-1/16'' to 1-3/8'' Tapered Axle

#5 · Best Measurement Guidance

5. AIUWIZO 4.5-Inch Hub Kit

• Weight: 17.78 lb
• Package Dimensions: 14.76 x 8.43 x 5.47 in

Best for: Tapered-Spindle Trailer Owners.

Why it ranks #5: Fits 3,500 lb tapered #84 spindles and clearly explains the outer-edge-to-opposite-hole-center method for measuring a 5-lug pattern.

A 6.34-inch hub diameter sets the AIUWIZO kit apart for buyers who need that specific dimension alongside a 5-on-4.5-inch pattern. The two-set package targets 3,500-pound trailer axles and fits #84 tapered spindles from 1-1/16 to 1-3/8 inches, helping narrow the match before a repair.

The stated 5-lug measurement method—outer edge of one hole to the center of the opposite hole—helps avoid a mistaken center-to-center check when identifying the 4.5-inch pattern. Its compatibility covers many 3,500-pound utility, boat, and cargo trailers, while the tapered-spindle-only restriction makes axle identification essential. The listing supplies two sets, which suits buyers replacing hubs in pairs; the 6.34-inch diameter is another dimension to compare with the existing hub before ordering.

Skip it if you have straight spindles or a different bolt pattern; the specified tapered-spindle and 5-on-4.5-inch fit will not match.

Choose this two-set kit if your 3,500-pound boat, utility, or cargo trailer has #84 tapered spindles and the stated bolt pattern. Check the 6.34-inch hub diameter and measure the pattern by the listed method before replacing parts.

Listed on Amazon as: 2 Sets 3500 lb 5 Lug Boat Trailer Hub, 5 on 4.5" Trailer Idler Hub Kit

#6

6. Saree Boat Hub Kit

• Weight: 17.33 lb

Best for: Boat Trailer Hub Replacement.

Why it ranks #6: A boat-use listing with a 5-on-4.5-inch pattern, 3,500 lb axle fit, and specified L44649 and L68149 bearings for tapered spindles.

Boat-trailer use is called out in the Saree kit’s title, pairing its stated application with a two-set package for 3,500-pound axles. The 5-on-4.5-inch hubs fit #84 tapered spindles and specify L44649 outer and L68149 inner bearings, giving buyers concrete compatibility checks.

The named L44649 and L68149 bearings help establish whether the kit matches existing axle hardware, while the 5-on-4.5-inch pattern identifies the required wheel interface. Saree lists compatibility with Dexter, Al-Ko, Lippert, Quality, and other 3,500-pound axle brands, but explicitly restricts use to tapered spindles. Two sets are included, making it suitable for a paired replacement when both sides share the listed dimensions. Confirm spindle type and bearing models before proceeding with a boat-trailer hub change.

Skip it if you need corrosion protection specifically stated for saltwater service; iBroPrat B0DRWM55MZ lists hot-dip galvanizing for seawater corrosion resistance.

This Saree kit suits boat-trailer owners replacing hubs on a matching 3,500-pound tapered axle. Its listed bearing models and bolt pattern are useful checks, but it does not fit straight spindles.

Listed on Amazon as: 2Sets 5 Lug 3500Lb Trailer Hub Kit, 5×4.5 for 1-1/16"-1-3/8" Tapered Spindle, Boat Use

#7

7. LUXTRKSTO 4.5-Inch Hub Kit

• Weight: 16.96 lb
• Package Dimensions: 13.19 x 7.24 x 5.71 in

Best for: Pre-Installed Hub Replacement.

Why it ranks #7: Lists a 3,500 lb #84 EZ-Lube tapered spindle fit and L44649 outer and L68149 inner bearings; its components are described as pre-installed.

Pre-installed components make the LUXTRKSTO kit notable for buyers seeking a hub package that needs no assembly before installation. It fits 3,500-pound #84 EZ-Lube tapered axles with a 5-on-4.5-inch pattern and L44649 outer and L68149 inner bearings, narrowing the fit requirements.

Because the listing says everything is pre-installed and no assembly is required, the kit can reduce parts handling during a hub replacement. Its specified L44649 and L68149 bearings provide concrete checks against the existing axle, while the 5-on-4.5-inch pattern helps establish wheel compatibility. The fit is limited to 1-1/16- to 1-3/8-inch tapered #84 spindles, so straight spindles are excluded. The product also notes that the dust-cap outer diameter may need grinding to a taper, an installation detail to account for.

Skip it if you want to avoid any dust-cap modification; Redants B0FB3B2TPM lists pre-assembled, pre-lubricated hubs without this stated grinding note.

This kit fits buyers prioritizing pre-installed parts for a compatible 3,500-pound tapered-axle replacement. Check the bearing models, bolt pattern, and spindle dimensions, and allow for the listed dust-cap taper adjustment during installation.

Listed on Amazon as: 5×4.5 Trailer Hub Kit for 3500lb 1-1/16'' to 1-3/8'' Tapered Axle

#8

8. Jreixr 4.5-Inch Hub Kit

• Weight: 17.57 lb
• Package Dimensions: 14.8 x 8.43 x 5.47 in

Best for: Boat Idler-Axle Replacement.

Why it ranks #8: Specifies a two-hub set for 3,500 lb total capacity, 5-on-4.5-inch pattern, #84 tapered spindle, and L44649 and L68149 bearings.

A stated 1,750-pound rating per hub makes the Jreixr kit’s capacity especially explicit: its two hubs are rated for 3,500 pounds total. It fits boat-trailer idler axles with #84 tapered spindles, a 5-on-4.5-inch pattern, and L44649 outer and L68149 inner bearings.

The per-hub and total capacity figures help buyers compare the kit with the axle application instead of relying on an unspecified rating. Jreixr identifies both bearing models and their dimensions, supporting a direct check against the existing spindle hardware. Its bolt-pattern instructions specify measuring from a hole’s outer edge to the opposite hole’s center, not center-to-center. The stated use is for boat-trailer idler axles; verify those details and the tapered-spindle requirement before replacing hubs.

Skip it if you have straight spindles or need another bolt circle; AIUWIZO B0G8GZPVNG also specifies a 5-on-4.5-inch tapered-spindle fit.

Jreixr suits boat-trailer idler-axle owners who need the stated 3,500-pound total rating and can match the bearing dimensions and bolt pattern. Its #84 tapered-spindle fit is the key boundary.

Listed on Amazon as: 2 Sets 3500 lb Trailer Idler Hubs Kit, 5 Bolt 4.5 for #84 Tapered Spindle

#9 · Best 5-on-5 Option

9. GREPSPUD 5-Inch Pattern Kit

• Weight: 16.78 lb
• Package Dimensions: 13.46 x 7.44 x 5.12 in

Best for: 5-on-5 Pattern Trailer Axles.

Why it ranks #9: Offers a less common 5-on-5-inch pattern for 3,500 lb #84 tapered axles and includes extra dust caps and rubber plugs.

A 5-on-5-inch bolt pattern makes the GREPSPUD kit the specific choice here for buyers whose trailer uses that less interchangeable interface. The two-set package fits 3,500-pound #84 EZ-Lube tapered axles and includes extra dust caps and rubber plugs for replacement or emergency spares.

The 5-on-5 pattern distinguishes this kit from common 5-on-4.5 options, so matching the trailer’s existing bolt circle is essential. GREPSPUD states compatibility with 1-1/16- to 1-3/8-inch axles and #84 EZ-Lube spindles, and includes two extra dust caps plus four rubber plugs. Those spare pieces can be kept for a later service need, reducing the chance that a damaged cap or plug stops an otherwise straightforward repair. Straight spindles are outside the stated fit.

Skip it if you have a 5-on-4.5-inch wheel pattern; Saree B0D4545Q6H specifies that pattern for compatible tapered axles.

Pick this kit when your 3,500-pound trailer has a 5-on-5 pattern, #84 tapered spindles, and you value spare caps and plugs in the package. The bolt circle is the central fit boundary, so verify it before purchase.

Listed on Amazon as: 5×5'' Trailer Hub Kits for 3500lb 1-1/16'' to 1-3/8'' Tapered Axle

#10

10. Aeagle 4.5-Inch Hub Kit

• Weight: 17.07 lb
• Package Dimensions: 15.86 x 10.51 x 7.05 in

Best for: Bearing-Specified Hub Replacement.

Why it ranks #10: Fits 3,500 lb tapered spindles and lists L68149 inner and L44649 outer bearings, though its supplied component details describe a single hub.

A detailed included-parts list gives the Aeagle kit a clear advantage for buyers checking each component before a two-hub repair. It supplies two 5-on-4.5-inch idler hubs, L68149 inner and L44649 outer bearings, grease seals, rubber-plug dust covers, and hub nuts for compatible tapered axles.

The bearing IDs and dimensions—L68149 at 1-3/8 inches and L44649 at 1-1/16 inches—make comparison with existing axle components more direct. Two hubs, seals, dust covers, and ten hub nuts are listed, so the parts package is specified for a paired replacement. Aeagle limits compatibility to 3,500-pound axles with 1-1/16- to 1-3/8-inch tapered spindles and recommends using a torque wrench during installation. The stated fit does not cover straight spindles.

Skip it if you have straight spindles; Jreixr B0GY4V96XP also specifies tapered spindles, so neither listed kit suits that axle type.

Aeagle fits buyers who want a clearly enumerated two-hub parts package and can verify the bearing IDs, 5-on-4.5-inch pattern, and tapered spindle dimensions. Follow its torque-wrench recommendation during installation.

Listed on Amazon as: Aeagle 2 Sets 5 on 4.5" Trailer Hub Kits for 1-1/16" & 1-3/8" Tapered Axle