Best 4Runner Lift Kit: Full Suspension and Spacer Options

#1 · Best Overall

1. Freedom Offroad 3-Inch Kit

• Weight: 77 lb
• Material: Steel
• Material Type: Steel

Best for: Complete 2003–2024 lift buyers.

Why it ranks #1: Its stated 2003–2024 fitment and 3-inch front and rear lift come with loaded front struts, application-specific rear springs, and rear shocks.

Loaded front struts, application-specific rear lift springs, and rear nitro twin-tube shocks combine in Freedom Off-Road’s complete three-inch lift for 2003–2024 4Runners. The bolt-on arrangement is intended to simplify installation, while the matched front and rear components target consistent elevation across the vehicle.

The kit provides a stated three inches of lift at both front and rear, with loaded front struts intended to maintain factory ride and enable bolt-on installation. At the back, application-specific lift springs are described as supporting consistent lift and ride quality, while nitro twin-tube shocks with a 40 mm piston are specified for lifted vehicles. Those components make this a complete suspension package rather than a spacer-only setup; mounting hardware is listed as included.

Skip it if you need an explicitly stated 2WD or 4WD fitment before choosing; the supplied listing does not specify drivetrain coverage.

A 2003–2024 4Runner owner seeking matching three-inch front and rear lift with springs, struts, and shocks may value this complete package. Confirm drivetrain applicability from the seller, since the supplied fitment details do not specify it.

Listed on Amazon as: Freedom Off-Road 3" Lift Kit w/Struts, Springs & Shocks for 03-24 4Runner

#2 · Best for Newer 4Runners

2. Rough Country M1 Kit

• Weight: 95.9 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Fifth-generation suspension upgrades.

Why it ranks #2: For 2010–2024 models, this 3-inch kit includes M1 struts and shocks plus forged aluminum upper control arms with pre-installed POM ball joints.

Forged aluminum upper control arms with pre-installed POM ball joints accompany Rough Country’s three-inch lift for 2010–2024 4Runners. That combination addresses suspension geometry and articulation alongside added ground clearance, while M1 monotube struts and shocks are specified for buyers who want a complete component upgrade.

The package includes coil springs, M1 monotube struts and shocks, forged aluminum upper control arms, and hardware, giving buyers more than a spacer-only lift. Rough Country states that the three-inch lift adds ground clearance while maintaining factory-like ride quality for daily driving. The upper control arms have pre-installed POM ball joints and are described as improving geometry and articulation. The specified 2010–2024 4Runner application makes model-year fit a central consideration.

Skip it if you own a 4Runner outside 2010–2024; this kit's listed application does not cover your model year.

This suits a 2010–2024 4Runner owner seeking three inches of lift with upgraded dampers and forged upper control arms. Its broad component package targets geometry and articulation as well as clearance, but the specified year range is the boundary.

Listed on Amazon as: Rough Country 3" Bolt-On Lift Kit w/M1 Struts & M1 Shocks for Toyota 4Runner (2010–2024) – Red Upper Control Arms, Increased Clearance & Level Stance

#3 · Best for 1996–2002

3. Rough Country N3 Kit

• Weight: 39 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Older 4WD trail builds.

Why it ranks #3: This complete 3-inch 4WD kit targets 1996–2002 models and includes coil springs, N3 lifted struts, rear shocks, and mounting hardware.

The N3 struts and shocks pair a three-inch lift with suspension components specified for on- and off-road use, giving 1996–2002 4Runner 4WD owners added ground clearance and room for tires up to 31×10.50. Strut extensions avoid preloading the coil springs, a useful distinction for buyers weighing a complete suspension refresh.

This kit includes two coil springs, two N3 lifted struts, two premium N3 shocks, and mounting hardware, so the package addresses front and rear suspension components rather than relying on spacers alone. The three-inch lift enables clearance for tires up to 31×10.50, while the N3 shocks are described for both on-road and off-road use. Rear shocks use recoil cut-off construction. Rough Country calls installation an at-home bolt-on process, but recommends a certified technician and post-install checks.

Skip it if you own a 2WD 4Runner or a model outside 1996–2002; the listed application is specifically 4WD in that year range.

A 1996–2002 4Runner 4WD owner seeking a complete three-inch suspension lift and N3 dampers should consider this kit, especially when targeting tires up to 31×10.50. Account for the recommended professional installation and post-install checks.

Listed on Amazon as: Rough Country 3" Lift Kit w/N3 Struts for 1996-2002 Toyota 4-Runner 4WD – 77131

#4 · Best for 2WD or 4WD

4. maXpeedingrods 1996–2002 Kit

• Weight: 18500 g
• Material: Steel
• Material Type: Steel

Best for: Older 2WD or 4WD owners.

Why it ranks #4: The 3-inch suspension kit covers 1996–2002 2WD and 4WD 4Runners, uses powder-coated steel, and is designed for 31-inch tires.

A three-inch suspension lift for 1996–2002 4Runner 2WD and 4WD models creates ground clearance intended to accommodate 31-inch tires. Its high-strength steel construction and powder-coated finish make this maXpeedingrods kit a relevant option for owners seeking added clearance alongside corrosion resistance.

The listed 2WD and 4WD fitment covers 1996–2002 4Runners, and the three-inch lift is intended to increase ground clearance for installing 31-inch tires. That gives buyers a clear target when planning a tire change, although the supplied information does not specify a maximum tire width. High-strength steel with a frosted or powder-coated finish is described as resisting corrosion and rust, while the included components are listed as shocks.

Skip it if you need a fully itemized package of springs and struts; the supplied component list names shocks only.

This suits a 1996–2002 4Runner owner seeking three inches of lift and ground clearance for 31-inch tires, with steel construction and a protective finish. Check the listed application carefully, since fitment does not extend beyond those model years.

Listed on Amazon as: maXpeedingrods 3" Suspension Lift Kit for Toyota 4-Runner 1996-2002

#5

5. maXpeedingrods 3/2 Kit

• Weight: 9.26 lb

Best for: Mixed-year 4Runner spacer buyers.

Why it ranks #5: Its 3-inch front and 2-inch rear lift is listed for 2003–2024 4Runners, but it excludes Limited models with X-REAS and 2018+ TRD Pro.

A three-inch front and two-inch rear lift gives 2003–2024 4Runner owners a split-height spacer setup, with the front strut spacer made from 6061 aluminum. The broad year range also includes 2007–2015 FJ Cruiser models, while explicit exclusions help buyers screen out incompatible suspensions.

The kit lists fitment for 2003–2024 4Runner 2WD and 4WD models and 2007–2015 FJ Cruiser 2WD and 4WD, making it relevant to owners comparing these applications. Its stated three-inch front and two-inch rear lift establishes the intended stance, while the 6061 aluminum front strut spacer provides the named material specification. It does not fit 4Runner Limited models with X-REAS hydraulic struts or 2018-and-newer TRD Pro models, an important compatibility boundary.

Skip it if you own a 4Runner Limited with X-REAS or a 2018-or-newer TRD Pro; those applications are specifically excluded.

A 2003–2024 4Runner owner seeking a front-and-rear spacer lift can consider this setup, as can a listed-year FJ Cruiser owner. Its stated exclusions make suspension configuration and TRD Pro status essential fit considerations.

Listed on Amazon as: maXpeedingrods 3" Front & 2'' Rear Lift Kit for Toyota 4Runner 2003-2024

#6

6. KSP 3/2 Leveling Kit

• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Tire-clearance planners.

Why it ranks #6: This 3-inch front and 2-inch rear setup fits 2003–2024 models and includes front spacers and rear polyurethane spring spacers, with specified exclusions.

A three-inch front and two-inch rear lift gives this KSP kit a split-height setup for 2003–2024 4Runners, with a stated maximum tire size of 35 inches. Heavy-duty carbon-steel front spacers and rear polyurethane coil spacers make the package relevant to owners planning a broader stance.

The included front spacers and rear coil spacers create the listed three-inch front and two-inch rear lift for compatible 4Runner and FJ Cruiser models. The listing says tires up to 35 inches can be installed, while warning that rubbing may occur at extreme articulation; factory-wheel users planning 35-inch tires are advised to double-check. Carbon-steel front spacers and tested lug bolts are specified, but 2018+ TRD Pro and X-REAS-equipped Limited 4Runners are excluded.

Skip it if you have a 2018-or-newer TRD Pro or an X-REAS-equipped Limited 4Runner; this kit excludes those applications.

This fits owners of listed-year 4Runners or FJ Cruisers seeking a split-height lift and considering tires up to 35 inches. Treat the stated rubbing warning seriously, particularly with factory wheels or extreme articulation.

Listed on Amazon as: KSP 4Runner Full Leveling Lift Kits 3"F+2"R

#7

7. PraOents 3/2 Leveling Kit

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Front-and-rear spacer seekers.

Why it ranks #7: The listed 2003–2024 4Runner fitment and 3-inch front, 2-inch rear lift suit buyers wanting a split-height leveling kit.

A stated three-inch front and two-inch rear lift gives the PraOents kit a split-height setup for listed 2003–2024 4Runners and 2007–2015 FJ Cruisers. Its listing explicitly cautions that lift height differs from kit thickness, helping buyers set more realistic expectations for spacer-based elevation.

The listed front-and-rear lift targets offer an alternative to a front-only leveling kit for compatible 4Runner and FJ Cruiser owners. The product title identifies strut spacers, and the supplied material specification is alloy steel. The listing also describes precision control and improved handling as intended benefits, but does not provide further component details. Since suspension geometry means lift height is not the same as kit thickness, buyers should not use spacer dimensions as a direct measure of resulting elevation.

Skip it if you need a specified fitment for a 4Runner suspension configuration not covered in the supplied listing; its exclusions are not stated.

Consider this for a listed-year 4Runner or FJ Cruiser owner seeking a front-and-rear spacer lift. The listing gives target lift figures but cautions that kit thickness differs from actual lift, so set expectations accordingly.

Listed on Amazon as: Leveling Lift Kit for 2003-2024 4Runner, 2007-2015 FJ Cruiser, 3 inch Front and 2 inch Rear Strut Spacers Leveling Kit

#8

8. VEVOR 3/2 Leveling Kit

• Weight: 6.2 lb
• Material: Polyurethane
• Material Type: Polyurethane

Best for: Polyurethane spacer-kit shoppers.

Why it ranks #8: This kit fits 2003–2022 4Runners and includes bottom strut and coil spring spacers, but excludes 2018+ TRD Pro and X-REAS models.

Separate bottom strut spacers and coil spring spacers provide a stated three-inch front and two-inch rear lift for compatible 2003–2022 4Runners. VEVOR notes that spacer thickness does not equal final lift height, a useful distinction when setting expectations for this polyurethane kit.

The kit includes two bottom strut spacers, two coil spring spacers, and high-strength bolts, connecting its parts to the stated front-and-rear chassis lift. Its listed application covers 2003–2022 4Runner 2WD and 4WD models and 2007–2015 FJ Cruisers. Polyurethane is the specified material. Because the listing cautions that spacer thickness differs from actual lift height and final height varies, buyers should treat the three-inch front and two-inch rear figures as stated lift targets, not spacer measurements.

Skip it if you need fitment for a 2023–2024 4Runner; this listing covers 4Runners only through 2022.

A 2003–2022 4Runner owner seeking a polyurethane spacer setup with both front and rear components may find this suitable. Keep the stated height caveat in mind, and exclude 2018+ TRD Pro or X-REAS-equipped models.

Listed on Amazon as: VEVOR 3 Inch Front and 2 Inch Rear Leveling Lift Kit for 2003-2022 Toyota 4Runner 2WD/4WD, 2007-2015 Toyota FJ Cruiser 2WD/4WD, Chassis Level Kit with 2 Bottom Strut Spacers and 2 Coil Spring Spacers

#9

9. Dynofit 2-Inch Front Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Front-only leveling shoppers.

Why it ranks #9: Its forged aluminum front spacers provide a stated 2-inch lift for 2003–2024 4Runners, but it does not fit X-REAS suspension.

A two-inch front lift from forged, aircraft-grade T6-treated aluminum spacers targets owners who want to raise the front suspension without adding a rear lift. The listed fitment spans 2003–2024 4Runners, with an installation time of one to two hours and no special tools specified.

The pair of front strut spacers is listed for 2003–2024 4Runner 2WD and 4WD models, as well as specified Tacoma and FJ Cruiser applications. The two-inch front lift addresses front-end leveling rather than a full front-and-rear lift. Forged T6-treated aluminum and a black anodized surface are specified for the spacers, while grade 10.9 bolts supply the included hardware. The listing excludes XREAS suspension models, which narrows compatibility.

Skip it if you want matching front and rear lift heights; this package lists two front strut spacers, not rear lift components.

Choose this for a listed-year 4Runner owner seeking a front-only two-inch leveling change and a compact spacer package. It is not a full suspension lift, and XREAS-equipped models are excluded, so those boundaries matter before selection.

Listed on Amazon as: Dynofit 2 Inch Leveling Lift Kit for Toyota Tacoma (2005-2023), 4Runner (2003-2024) and FJ Curise (2007-2015), Raise Front Suspension 2in, Set of 2Pcs Forged Aluminum Strut Spacers Level Kit

#10

10. KSP 2-Inch Front Kit

• Weight: 2 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: Front leveling across platforms.

Why it ranks #10: This aluminum spacer kit gives a stated 2-inch front lift and fits 2003–2024 4Runners, but supplies front lift only and excludes X-REAS.

Forged aircraft-grade aluminum strut spacers provide a two-inch front lift for listed 2003–2024 4Runner models, plus specified Tacoma and FJ Cruiser applications. This front-only setup includes mounting hardware and instructions, making it a focused choice for buyers seeking a leveling change rather than rear lift components.

The kit lists two strut spacers with bolts, nuts, washers, and instructions, and specifies a two-inch front lift for compatible vehicles. Fitment includes 2003–2024 4Runner 2WD and 4WD models, with XREAS suspension excluded. The listing also explains that lift height and spacer thickness are not a one-to-one ratio and recommends an alignment after installation. Those details help buyers plan for the front-only change and the follow-up alignment step.

Skip it if you want to raise both ends of your 4Runner; this kit lists front strut spacers only.

This suits a compatible 4Runner owner seeking a two-inch front leveling change and willing to arrange the recommended alignment afterward. It does not provide a rear lift, and XREAS-equipped suspension is excluded.

Listed on Amazon as: KSP 2" lift kits for Tacoma 2005-2023, Leveling Kit Lift Strut Spacers