Best 3 Ton Low Profile Floor Jack for Cars and SUVs

#1 · Best Overall

1. SATA 3-Ton Steel Floor Jack

• Dimensions: 28.35 x 13.58 x 6.3 in
• Weight: 70 lb
• Load Capacity: 3 T

Best for: Very-low-clearance steel lifting.

Why it ranks #1: Its 2-11/16-inch minimum is the lowest stated here, with a dual-piston quick-lift pump, 3-ton capacity, and listed 1.5-times overload testing.

A 2-11/16-inch minimum height lets the SATA 3TSteel reach beneath vehicles with especially limited clearance. Its 3-ton rating, dual-piston quick-lift pump, and steel construction address both entry access and lifting workflow, while the stated 1.5-times overload test adds a concrete safety-check detail.

The 2-11/16-inch entry height is the defining fit point for lowered or low-profile vehicles; the listed maximum lift height is not supplied, so buyers should focus on the stated entry clearance. SATA specifies a 3-ton rating and says each unit is tested to 4.5 tons, or 1.5 times capacity. Its thickened, high-strength steel frame is described as resisting deformation under pressure. The dual-piston quick-lift pump supports a quicker raising workflow for home or professional use.

Skip it if you need a stated maximum lift height before choosing; the VEVOR K500 lists a 500 mm maximum.

The SATA fits buyers whose first concern is getting a 3-ton jack beneath a very low vehicle, including home and professional users. Its 2-11/16-inch minimum is specific; the supplied specifications do not give a maximum lift height.

Listed on Amazon as: SATA 3-Ton (6,600 lb) Heavy-Duty Steel Floor Jack Ultra-Low Profile Design (2-11/16” Height) with Dual-Piston Quick Lift Pump, Tested for 1.5X Overload for Ultimate Safety

#2 · Lowest Listed Range

2. LARBANKE K497-1 Floor Jack

• Dimensions: 29.13 x 13.38 x 6.29 in
• Weight: 70 lb
• Load Capacity: 3 ton
• Material: Carbon Steel

Best for: Low-entry hydraulic work.

Why it ranks #2: The listed 2.87-to-19.69-inch lifting range combines a low entry height with substantial stated reach, and it uses a dual-piston pump.

A 2.87-inch minimum height gives the LARBANKE K497-1 a low entry point for vehicles that leave little room beneath the chassis. Its dual-piston pump is described as lifting smoothly and faster to maximum height, pairing access with a 3-ton capacity for garage or home maintenance.

The 2.87-to-19.69-inch lifting range supports both low initial access and a defined maximum height, helping buyers judge whether the jack suits their vehicle and work area. Its 3-ton, 6,600-pound capacity is paired with carbon-steel construction. Operation is specified step by step: turn the handle clockwise to close the valve, pump to the desired height, then turn counterclockwise to lower slowly. That clear sequence informs the lifting and lowering workflow, though it requires attention to handle direction.

Skip it if you want a lighter jack to move; the winturbor T30B4625-A weighs 51.8 pounds.

Pick the K497-1 for home or garage work where a 2.87-inch entry height and 19.69-inch maximum suit the vehicle. Its handle-controlled valve operation is a relevant consideration for buyers learning its lifting and lowering sequence.

Listed on Amazon as: Larbanke 3 Ton Hydraulic 2.87"-19.69" Floor Jack,Dual Piston

#3 · Tallest Listed Lift

3. AV Steel Low Profile Jack

• Dimensions: 31.7 x 15.8 x 8.3 in
• Load Capacity: 6600 lb
• Material: Alloy Steel

Best for: Low cars needing extra lift.

Why it ranks #3: Its 3-1/8-inch minimum and 19-7/8-inch maximum make a broad stated range, with alloy-steel construction and a listed one-year warranty.

A 3-1/8-inch minimum height and 19-7/8-inch maximum give this AV Steel jack a defined range from low entry to substantial lift. Its 3-ton, 6,600-pound capacity and dual-piston quick-lift pump make it a candidate for car owners who want access and a broad working range.

The stated 3-1/8-to-19-7/8-inch range helps buyers compare the jack with a vehicle’s ground clearance and the height needed for service. Its 3-ton capacity is paired with alloy-steel construction, and the listing describes it as versatile across different vehicle types while specifying car compatibility. A dual-piston quick-lift pump connects the jack’s design to a faster raising workflow. At 31.7 inches long by 15.8 inches wide in the specifications, it also needs a suitable storage footprint.

Skip it if you have less than 3-1/8 inches of clearance; the SATA 3TSteel starts at 2-11/16 inches.

This AV Steel is suited to car owners who need a stated 19-7/8-inch maximum and a dual-piston pump for maintenance lifting. Check the 3-1/8-inch minimum against the vehicle and allow room for its listed storage footprint.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#4 · Longest Listed Reach

4. YELLOW JACKET Floor Jack

• Dimensions: 8.1 x 30.5 x 15 in
• Weight: 70.6 lb
• Load Capacity: 3 tons
• Material: Alloy Steel

Best for: Quick-lift mixed-vehicle service.

Why it ranks #4: It lists a 3-1/8-inch minimum and 20-inch maximum, plus dual pumps and a rubber pad; its 3-ton capacity suits this roundup.

A 3-1/8-inch minimum and 20-inch maximum give the YELLOW JACKET a clearly stated range for low entry and substantial lift. Its dual-pump design is described as reaching the desired height faster than a single pump, and the included rubber pad protects the vehicle during lifting.

The 3-ton, 6,600-pound capacity and listed car-and-truck compatibility make this steel jack suitable for varied vehicle service. Its lifting range lets buyers compare the 3-1/8-inch entry point with ground clearance and the 20-inch maximum with their intended work. The dual pumps are presented as a faster route to the desired height, which supports a more efficient raising routine. A rubber pad comes with the jack, providing a protective contact surface without requiring a separate matching pad purchase.

Skip it if you need a lower entry point than 3-1/8 inches; the SATA 3TSteel starts at 2-11/16 inches.

Choose the YELLOW JACKET for car or truck service when its 3-1/8-to-20-inch range and included rubber pad match the job. Its dual-pump lifting feature suits buyers prioritizing a quicker raising workflow, while its 70.6-pound weight affects handling.

Listed on Amazon as: YELLOW JACKET 3 Ton Hydraulic Floor Jack Dual Pump for Quickly Car Lift, Low Profile Service Jack, 6600 lb Capacity

#5

5. VEVOR K500 Floor Jack

• Dimensions: 31.7 x 15.8 x 8.3 in
• Weight: 73 lb
• Load Capacity: 3 tons
• Material: Alloy Steel

Best for: Wide-range garage lifting.

Why it ranks #5: Its 3.35-to-19.69-inch lifting range and 3-ton rating cover a wide range of lifting needs, though the jack weighs 73 pounds.

An 85 mm minimum height paired with a 500 mm maximum gives the VEVOR 3 Ton Low Profile Floor Jack a broad stated lifting range. Its 6,600-pound capacity and dual-parallel-pump feature target owners who want one steel jack for routine lifting across cars, trucks, and SUVs.

The 3-ton capacity supports lifting loads up to 6,600 pounds, while the stated 85-to-500 mm range spans low entry and substantial lift height. VEVOR lists family cars, trucks, and SUVs among the applications, making the range useful for mixed-vehicle maintenance. The dual parallel pump is named in the product information, connecting the pump design to lifting workflow. At 73 pounds and 31.7 inches long, however, this steel jack calls for planning where it will be stored and moved.

Skip it if you need a lighter jack to carry around; the Jack Boss AS830011L weighs 58.5 pounds.

This VEVOR suits garage users lifting family cars, trucks, or SUVs who value a wide 85-to-500 mm range. Its 73-pound weight and 31.7-inch length make storage space and moving the jack important practical considerations.

Listed on Amazon as: VEVOR 3 Ton Low Profile Floor Jack

#6

6. Jack Boss 3 Ton Floor Jack

• Dimensions: 23.6 x 11.8 x 6.3 in
• Weight: 58.5 lb
• Load Capacity: 3 tons
• Material: Aluminum

Best for: Low-clearance SUV owners.

Why it ranks #6: The aluminum-and-steel jack lists a 3-15/16-to-18-5/16-inch range, 3-ton capacity, rubber saddle, and two-piece handle.

A 3-15/16-inch minimum height lets the Jack Boss slide beneath many low-clearance vehicles, while its 18-5/16-inch maximum gives room to raise them for service. Its 3-ton capacity and aluminum-and-steel construction suit drivers seeking a jack for garage work across several vehicle types.

The stated 3-ton capacity covers vehicles up to 6,600 pounds, and the listed applications include sedans, SUVs, MPVs, station wagons, travel trailers, and minivans. That range makes it a flexible home-garage option when more than one vehicle needs lifting. The dual-piston quick-lift pump is identified in the title, supporting faster raising, while the included rubber saddle provides a contact surface at the lift point. Its 58.5-pound weight is worth considering when moving or storing it.

Skip it if you need clearance below 3-15/16 inches; the SATA 3TSteel starts at 2-11/16 inches.

Choose this Jack Boss for home-garage lifting across sedans, SUVs, trailers, or minivans when its 3-15/16-inch entry height clears the vehicle. Its 18-5/16-inch maximum and substantial 58.5-pound weight are relevant fit and handling considerations.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#7

7. LARBANKE K465 Floor Jack

• Dimensions: 24.21 x 13.19 x 3.15 in
• Load Capacity: 3 ton
• Material: Alloy Steel, Aluminum

Best for: Aluminum-steel home lifting.

Why it ranks #7: This 3-ton hydraulic jack is listed for cars and uses alloy steel and aluminum, but its supplied specifications do not state a lift range.

A mixed alloy-steel and aluminum material listing distinguishes the LARBANKE K465 among these 3-ton low-profile jacks. Its 6,600-pound capacity and quick-lift capability target vehicle maintenance at home or in a workshop, with a compact 24.21-inch listed length that informs storage planning.

The 3-ton rating covers loads up to 6,600 pounds, and the listing describes use across small cars, trucks, and SUVs. Alloy steel and aluminum are both named as materials, while the title identifies a low-profile hydraulic design and the features mention quick-lift capability. These details support a buyer comparing capacity, construction, and lifting workflow. The supplied specifications identify car compatibility and do not state minimum or maximum lifting heights, so exact vehicle-clearance matching remains unresolved from the listed facts.

Skip it if you need an explicit lifting range; the LARBANKE K497-1 lists a 2.87-inch minimum and 19.69-inch maximum.

The K465 suits buyers seeking a 3-ton low-profile hydraulic jack for home or workshop vehicle maintenance who value its mixed-material listing. Its compact listed length aids storage planning, but the supplied facts do not define its lifting-height range.

Listed on Amazon as: 3 Ton Low-Profile Hydraulic Floor Jack,Durable Floor Jack

#8

8. Maxority 3-Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel

Best for: Lowered-car access seekers.

Why it ranks #8: It offers 3-ton capacity, alloy-steel construction, and an extended-reach design for low-clearance vehicles, but no numeric lifting range is supplied.

An extended-reach design is specifically described for reaching vehicles with low ground clearance, including lowered cars and vehicles with aftermarket modifications. The Maxority pairs that access focus with a 3-ton capacity, steel construction, and dual-piston quick-lift pump for home or workshop maintenance.

The extended reach and ultra-low-profile description address access beneath low-underbody vehicles, a useful combination for owners of lowered cars or modified vehicles. Maxority states a 6,600-pound capacity and alloy-steel construction, while the dual-piston quick-lift pump connects the design to a faster lifting workflow. The supplied facts list car compatibility and an included pumping handle. They do not provide minimum or maximum lift heights, so buyers cannot compare exact clearances or working height from the listed information.

Skip it if you need exact lifting-height measurements before buying; the YELLOW JACKET AS830026W lists a 3-1/8-inch minimum and 20-inch maximum.

The Maxority is aimed at owners of lowered or modified cars who prioritize extended reach and low-profile access for workshop maintenance. Its capacity and pump are specified, but the available facts do not give a lift-height range.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 3 Ton Low Profile)

#9

9. winturbor T30B4625-A Jack

• Dimensions: 25.59 x 12.6 x 5.91 in
• Weight: 51.8 lb
• Load Capacity: 3 Ton
• Material: Alloy Steel

Best for: Roadside tire-repair kit users.

Why it ranks #9: Its 3-ton capacity, dual-piston pump, two rubber pads, and tire repair kit add useful extras, but no numeric lifting range is listed.

An included eight-piece tubeless tire repair kit lets the winturbor package roadside tire work alongside its 3-ton hydraulic floor jack. The dual-piston quick-lift pump is described as reaching full height in fewer strokes, while two rubber pads protect lift points and absorb shock during use.

The jack is listed for cars, SUVs, and trucks, with a 3-ton capacity and alloy-steel construction. Its dual-piston pump is described as lifting to full height in fewer strokes than a single-pump model, which can streamline repeated raising during tire changes, brake repairs, or oil changes. Two non-slip rubber pads provide lift-point protection, while the eight-piece kit handles tubeless tire repairs without removing the rim. Together, those included items suit users who want lifting and tire repair tools in one package.

Skip it if you need a stated minimum clearance height; the LARBANKE K497-1 lists a 2.87-inch minimum.

This winturbor package suits drivers who want a floor jack plus tubeless tire repair supplies for roadside or garage work. Its kit is specifically for tubeless tires, and the supplied specifications do not state a lifting-height range.

Listed on Amazon as: 3 Ton Low Profile Floor Jack Heavy Duty Hydraulic Jack for Car Truck SUV

#10

10. antlevix Low Profile Jack

• Dimensions: 26.77 x 13.39 x 6.69 in
• Load Capacity: 6600 lb
• Material: Alloy Steel

Best for: Mixed-vehicle garage maintenance.

Why it ranks #10: It is a 3-ton steel low-profile jack with a handle and rubber saddle, but its supplied facts give no numeric lift range or maximum height.

A 26.77-inch listed length makes the antlevix floor jack shorter than many long-frame options in this roundup, while its 3-ton capacity targets cars, SUVs, and light trucks. Its low-profile design addresses limited ground clearance, and the dual-piston pump supports lifting workflow in garages and shops.

The 6,600-pound capacity is paired with alloy-steel construction and a stated application range covering cars, SUVs, and light trucks. That combination gives home-garage and shop users a broad vehicle-use description without specifying a lifting range, so entry and maximum heights cannot be assessed from the supplied facts. The dual-piston pump is identified in the title, and the included handle, jack body, and rubber saddle provide the listed components for lifting setup. Its 26.77-inch length informs storage planning.

Skip it if you need a listed minimum and maximum lifting height; the VEVOR K500 specifies both.

Consider the antlevix for garage or shop lifting across cars, SUVs, and light trucks when its low-profile design and listed components fit your needs. Buyers requiring exact clearance and maximum-height figures should note those measurements are not supplied.

Listed on Amazon as: Heavy-Duty 3-Ton (6,600 lbs) Low Profile Hydraulic Floor Jack, Steel, Dual Piston Pump – for Cars, SUVs, and Trucks – Garage & Shop Maintenance