Best Telescopic Cylinder For Dump Trailer: Compare 7 Options

Best Telescopic Cylinder For Dump Trailer

A strong choice for a dump trailer delivers a stroke and capacity matched to the body, with mounting hardware or a complete kit when needed. Primary Mover’s 120-inch Standard Kit is a practical starting point for 12–16-foot dump bodies: it lists 30+ tons of lifting capacity and includes a power unit, brackets, hinges, safety prop arm, cables, fittings, and load control valve. This roundup also compares longer and shorter Primary Mover kits, a Magister replacement cylinder, and two-stage cylinders from Spare Parts Holland.

The listings vary substantially in stroke, stated capacity, and what arrives in the box, so check your trailer’s required geometry and mounting arrangement before choosing. A longer stroke or higher capacity is not automatically the right match for every trailer.

Primary Mover 12K 120-Inch Standard Kit leads because it pairs a 120-inch stroke and stated 30+ ton lifting capacity with a listed fit for 12–16-foot dump bodies. Its included components extend beyond the cylinder: the kit lists a high-flow power unit, mounting brackets, hinges, safety prop arm, battery cables, fittings, and a load control valve. That makes it the most complete match in this selection for buyers whose dump body falls within that stated size range.

Confirm mounting and hydraulic requirements before ordering.

Our Top Picks

Primary Mover 12K 120-Inch Standard KitBest Overall

Primary Mover 12K 120-Inch Standard Kit

The 120-inch stroke is listed for 12–16-foot dump bodies, with 30+ tons capacity and a power unit, brackets, hinges, safety arm, and valve included.

View on Amazon
Primary Mover 12K 108-Inch Hoist KitBest 10–14-Foot Fit

Primary Mover 12K 108-Inch Hoist Kit

Its 108-inch stroke and 30+ tons capacity target 10–14-foot dump bodies; the hoist-only package includes upper and lower mounting brackets.

View on Amazon
Primary Mover 12K 168-Inch KitLongest Stroke

Primary Mover 12K 168-Inch Kit

The 168-inch stroke and 30+ tons capacity suit listed 20–24-foot dump bodies, with cylinder and mounting hardware among the included components.

View on Amazon

Compare These Telescopic Cylinders and Hoist Kits

#ProductWeightMaterialLoad CapacityBuy
1175 lbCarbon Steel30+ TonsView on Amazon
2225 lbCarbon Steel30+ TonsView on Amazon
3175 lbCarbon Steel30 TonView on Amazon
4175 lbHigh Carbon Steel20+ TonsView on Amazon
5199 lb——View on Amazon
6
Spare Parts Holland 2-Stage Cylinder6. Spare Parts Holland 2-Stage CylinderShort-stroke, 13,200-pound lifts
33 lb——View on Amazon
7
Spare Parts Holland 20-Inch Cylinder7. Spare Parts Holland 20-Inch CylinderCompact-stroke hydraulic setups
———View on Amazon

Detailed Reviews: Best Telescopic Cylinder For Dump Trailer

Primary Mover 12K 120-Inch Standard Kit

#1 · Best Overall

1. Primary Mover 12K 120-Inch Standard Kit

  • Weight: 175 lb
  • Material: Carbon Steel
  • Load Capacity: 30+ Tons

Best for: Complete kits for 12–16-foot beds.

Why it ranks #1: The 120-inch stroke is listed for 12–16-foot dump bodies, with 30+ tons capacity and a power unit, brackets, hinges, safety arm, and valve included.

A 120-inch stroke, 30+ ton capacity, and a broad set of installation components distinguish this Primary Mover standard kit. It is specified for 12–16-foot dump bodies and includes a high-flow power unit, brackets, hinges, a safety prop arm assembly, and a load control valve.

The 120-inch telescopic cylinder is matched to 12–16-foot dump bodies, giving buyers a stated bed-length range for fit assessment. Its listed 30+ ton capacity targets heavy hauling, while carbon-steel construction specifies the cylinder material. Unlike a cylinder-and-brackets-only package, the included components list a high-flow power unit with upgraded #8 SAE port, battery cables, fittings, and a load control valve. The hinges and safety prop arm assembly also form part of the stated kit contents.

Pros
  • 120-inch telescopic cylinder stroke
  • Rated for 30+ tons of lifting capacity
  • Specified for 12–16-foot dump bodies
  • Includes power unit, load control valve, hinges, and safety prop arm assembly
Cons
  • The listed fit range is limited to 12–16-foot dump bodies.

Skip it if you have a 20–24-foot dump body; the Primary Mover 12k-168-inch kit is specified for that longer bed range.

This kit suits buyers assembling a heavy-duty setup for a 12–16-foot dump body who want the power unit and listed hardware included. Its stated body-length range is the key fit boundary to check.

Full product details
BrandPrimary Mover
ColorBlack
Compatible with Vehicle TypeTrailer
Included ComponentsThe telescopic dump bed kit includes a hydraulic cylinder, high flow power unit with an upgraded #8 SAE port, upper and lower mounting brackets, heavy-duty hinges, safety prop arm assembly, battery cables, rubber strap, fittings, and a load control valve.
Item Dimensions144 x 7 x 7 inches
Item Weight175 pounds
Load Capacity30+ Tons
ManufacturerPrimary Mover
Part NumberZY01
MaterialCarbon Steel
Style NameStandard Kit

Listed on Amazon as: 12K -120" 30+ Ton Lifting Capacity – Telescopic Dump Trailer Hydraulic Cylinder | Standard Kit | – 120" Stroke – Fits 12-16' Dump Body (EF-12-120-SK)

View on Amazon
Primary Mover 12K 108-Inch Hoist Kit

#2 · Best 10–14-Foot Fit

2. Primary Mover 12K 108-Inch Hoist Kit

  • Weight: 225 lb
  • Material: Carbon Steel
  • Load Capacity: 30+ Tons

Best for: 10–14-foot beds, 30+ ton loads.

Why it ranks #2: Its 108-inch stroke and 30+ tons capacity target 10–14-foot dump bodies; the hoist-only package includes upper and lower mounting brackets.

A 108-inch stroke paired with a stated 30+ ton capacity makes this Primary Mover kit a heavy-lifting option for 10–14-foot dump bodies. The listed cylinder and upper and lower mounting brackets supply core hoist components for buyers planning a telescopic trailer installation.

The 108-inch stroke is specified for 10–14-foot dump bodies, helping buyers narrow the intended fit range. Its stated 30+ ton capacity and carbon-steel construction address load rating and cylinder material. The included components list a 108-inch hydraulic cylinder and heavy-duty upper and lower mounting brackets, but the style is Hoist Only. That package scope matters when planning the rest of the hydraulic system and the work needed to complete installation.

Pros
  • 108-inch telescopic cylinder stroke
  • Rated for 30+ tons of lifting capacity
  • Specified for 10–14-foot dump bodies
  • Heavy-duty upper and lower mounting brackets included
Cons
  • Hoist Only package does not list a hydraulic power unit among its included components.

Skip it if you want a listed power unit and load control valve in the kit; the Primary Mover EF-12-120-SK includes both.

This suits buyers outfitting a 10–14-foot dump body that calls for a 108-inch stroke and a stated 30+ ton capacity. The Hoist Only scope means the rest of the hydraulic setup must be planned separately.

Full product details
BrandPrimary Mover
ColorBlack
Compatible with Vehicle TypeTrailer
Included ComponentsHydraulic Cylinder 108", Heavy Duty Mounting Lower and Upper Brackets.
Item Dimensions108 x 7 x 108 inches
Item Weight225 pounds
Load Capacity30+ Tons
ManufacturerPrimary Mover
Part NumberZY013
MaterialCarbon Steel
Style NameHoist Only

Listed on Amazon as: 12K -108" 30+ Ton Dumping Capacity – Telescopic Dump Trailer Hydraulic Cylinder Kit – 108" Stroke – Fits 10-14' Dump Body | Hoist Only| (EF-12-108-H)

View on Amazon
Primary Mover 12K 168-Inch Kit

#3 · Longest Stroke

3. Primary Mover 12K 168-Inch Kit

  • Weight: 175 lb
  • Material: Carbon Steel
  • Load Capacity: 30 Ton

Best for: Long-bed, high-capacity hauling.

Why it ranks #3: The 168-inch stroke and 30+ tons capacity suit listed 20–24-foot dump bodies, with cylinder and mounting hardware among the included components.

A 168-inch stroke and stated 30+ ton lifting capacity set this Primary Mover kit apart for 20–24-foot dump bodies. Its telescopic cylinder is aimed at long-bed applications, while the included mounting brackets and safety prop arm assembly address key parts of the hoist setup.

The 168-inch stroke is matched in the listing to 20–24-foot dump beds, giving buyers a clear starting point for assessing trailer fit. A stated capacity of more than 30 tons addresses heavy payload requirements, while carbon-steel construction supplies the cylinder material specification. The listed package components include an H-frame lower bracket, two upper brackets, hinges, and a safety prop arm assembly. The Hoist Only label makes it important to verify the package scope against the installation plan.

Pros
  • 168-inch telescopic cylinder stroke
  • Rated for 30+ tons of payload
  • Specified for 20–24-foot dump beds
  • Includes mounting brackets, hinges, and safety prop arm assembly
Cons
  • At 175 pounds, the listed kit is a substantial component to handle during installation.

Skip it if you have a 12–16-foot bed; the Primary Mover EF-12-120-SK is specified for that shorter body range.

This suits buyers fitting a 20–24-foot dump body who need the listed 168-inch stroke and 30+ ton capacity. Its 175-pound listed weight and Hoist Only label are relevant when planning handling and installation.

Full product details
BrandPrimary Mover
ColorBlack
Included ComponentsCylinder, mounting brackets, hinges, safety prop arm assembly, battery cables,
Item Weight175 pounds
Load Capacity30 Ton
ManufacturerPrimary Mover
Part NumberEF7-168
Manufacturer Warranty DescriptionOne year.
MaterialCarbon Steel
Model Number168"-TPM
StyleHoist Only
Style NameHoist Only

Listed on Amazon as: 12k -168" Telescopic Dump Trailer Kit 30+ Ton Dumping Capacity – 168" Stroke – Fits 20-24' Dump Body (Hoist Only)

View on Amazon
Primary Mover 7K 90-Inch Kit

#4 · Best 8–12-Foot Fit

4. Primary Mover 7K 90-Inch Kit

  • Weight: 175 lb
  • Material: High Carbon Steel
  • Load Capacity: 20+ Tons

Best for: Heavy-duty 8–12-foot beds.

Why it ranks #4: This 90-inch-stroke hoist-only kit is listed for 8–12-foot bodies and 20+ tons, and includes heavy-duty upper and lower brackets.

A 90-inch stroke paired with a stated 20+ ton capacity targets dump bodies from 8 to 12 feet. The Primary Mover kit includes a telescopic cylinder and upper and lower mounting brackets, giving buyers key hoist components for a heavy-duty trailer setup.

The high-carbon-steel cylinder is rated for loads over 20 tons, making its capacity the central consideration for demanding trailer or truck applications. Its 90-inch stroke is specified for 8–12-foot dump bodies, helping buyers narrow the intended bed-length fit. Upper and lower heavy-duty mounting brackets are included, so the package supplies mounting hardware alongside the cylinder. This is labeled Hoist Only, so buyers should account for that kit scope when planning the complete hydraulic installation.

Pros
  • 90-inch telescopic cylinder stroke
  • Rated for 20+ tons of payload
  • Specified for 8–12-foot dump bodies
  • Upper and lower heavy-duty mounting brackets included
Cons
  • Hoist Only package does not list a hydraulic power unit among its included components.

Skip it if you need a listed complete kit with power unit, hoses, and safety components; the Primary Mover EF-12-120-SK includes those items.

For buyers equipping an 8–12-foot dump body that needs a 90-inch stroke and a stated 20+ ton capacity, this provides the cylinder and brackets. Check that Hoist Only scope suits your hydraulic-system plan.

Full product details
BrandPrimary Mover
ColorBlack
Compatible with Vehicle TypeTrailer, Truck
Included ComponentsHydraulic Cylinder 90", Heavy Duty Mounting Lower and Upper Brackets.
Item Dimensions90 x 7 x 90 inches
Item Weight175 pounds
Load Capacity20+ Tons
ManufacturerPrimary Mover
Part Number90"-TPM
MaterialHigh Carbon Steel
Style NameHoist Only

Listed on Amazon as: 7k -90" Telescopic Dump Trailer Kit 20+ Ton Dumping Capacity – Hydraulic Cylinder – 90" Stroke – Fits 8-12' Dump Body (Hoist Only)

View on Amazon
Magister TSA12-3.108 Cylinder

#5 · Replacement Cylinder

5. Magister TSA12-3.108 Cylinder

  • Weight: 199 lb

Best for: Trunnion-mount trailer replacements.

Why it ranks #5: The dump-trailer cylinder has 12-ton capacity, 108-inch stroke, 3 stages, 3000 PSI rating, and listed compatibility with several trailer brands.

A 108-inch stroke in a three-stage, single-acting cylinder gives this Magister Hydraulics ram a specific combination for dump trailers. Its 12-ton rating and trunnion mount help buyers assess lifting capacity and mounting style, while listed compatibility covers several established trailer brands.

The cylinder retracts to 44 inches and extends to 152 inches, so its three-stage telescopic arrangement offers long reach while the listing also describes minimal installation space when retracted. The 12-ton rating and 3000 PSI pressure specification help buyers assess it against their hydraulic system requirements. A trunnion mount with a pin-hole end and 1.015-inch pin diameter informs mounting checks. Listed compatibility includes Big Tex, PJ Trailers, Load Trail, and other named brands.

Pros
  • Three-stage telescopic, single-acting design
  • 12-ton capacity and 3000 PSI rated pressure
  • 108-inch stroke; 44-inch retracted length
  • Trunnion mount with listed compatibility for named trailer brands
Cons
  • The 12-ton capacity is below the 30+ ton ratings listed for some heavy-duty kits.

Skip it if you need a stated 30+ ton capacity for a heavy payload; the Primary Mover EF-12-108-H lists that higher rating.

A buyer replacing or specifying a trunnion-mount ram for a dump trailer can weigh this 12-ton cylinder’s stroke, pressure, and pin dimensions against the installation. Its stated capacity defines the payload boundary to consider.

Full product details
BrandMagister Hydraulics
Item Weight‎199 pounds
Item model number‎TSA12-3.108
Manufacturer‎Magister Hydraulics
Dimensions‎50 x 10 x 10 inches

Listed on Amazon as: Magister Telescopic Hydraulic Cylinder 3 Stage 12 Ton 108 in, Single Acting Hydraulic Ram 3000 PSI, for Dump Trailers, Trunnion Mount (TSA12-3.108)

View on Amazon
Spare Parts Holland 2-Stage Cylinder

#6

6. Spare Parts Holland 2-Stage Cylinder

  • Weight: 33 lb

Best for: Short-stroke, 13,200-pound lifts.

Why it ranks #6: This standalone two-stage cylinder lists 27.6-inch stroke and 13,200 pounds thrust at 2900 PSI, but the listing provides no dump-body fit range.

A 27.6-inch stroke and 13,200-pound thrust rating at 2900 PSI make this two-stage cylinder a compact-stroke option for suitable hydraulic applications. Its high-quality sealing system and stated operating-pressure limit give buyers concrete specifications to compare with their equipment requirements.

The two-stage configuration provides a 27.6-inch stroke, so buyers can judge whether its extension meets the required dump-bed movement before planning installation. The listed largest-stage thrust is 60 kN, or 13,200 pounds, at 2900 PSI; that pressure limit is important when matching the cylinder to a hydraulic circuit. A high-quality sealing system is specified, and the listing recommends protecting the oil circuit with a pressure limiter and filter, plus regular oil checks and changes.

Pros
  • Two-stage telescopic cylinder
  • 27.6-inch stroke
  • 13,200-pound thrust at 2900 PSI
  • High-quality sealing system specified
Cons
  • The 27.6-inch stroke is short for dump-body applications requiring substantial extension.

Skip it if you need a long-reach cylinder for a large dump body; the Magister Hydraulics TSA12-3.108 lists a 108-inch stroke.

This cylinder fits buyers whose required movement falls within its 27.6-inch stroke and whose hydraulic system operates within the listed 2900 PSI limit. Plan circuit protection and regular oil maintenance as specified.

Full product details
BrandSPARE PARTS HOLLAND
Color‎Black
Included Components‎Cylinder
Item Weight‎33 pounds
Item model number‎SPH340375
Manufacturer‎Spare Parts Holland
Dimensions‎0.39 x 0.39 x 0.39 inches

Listed on Amazon as: Hydraulic Telescopic Cylinder 2 Stages, 27.6 Inch Stroke, 13200 Lbs Capacity

View on Amazon
Spare Parts Holland 20-Inch Cylinder

#7

7. Spare Parts Holland 20-Inch Cylinder

Best for: Compact-stroke hydraulic setups.

Why it ranks #7: The two-stage cylinder lists 12,800 pounds thrust at 2900 PSI and a 20-inch stroke option, but its listing gives no dump-trailer fit or body range.

The listed 20-inch version of this two-stage telescopic cylinder offers 12,800 pounds of thrust at 2900 PSI. That shorter stroke can suit a setup needing limited extension, while its stated sealing system and oil-care recommendations inform hydraulic-system planning.

This version is identified as the 20-inch stroke option, allowing buyers to assess its reach against the movement their trailer mechanism requires. Its 12,800-pound thrust rating is specified at 2900 PSI, which helps with capacity and pressure matching. The two-stage design and high-quality sealing system are listed features. The manufacturer recommends a pressure limiter and filter to protect the oil circuit, along with checking oil condition and performing regular oil changes.

Pros
  • Listed 20-inch stroke version
  • 12,800-pound thrust at 2900 PSI
  • Two-stage telescopic design
  • High-quality sealing system specified
Cons
  • The 20-inch stroke limits its reach compared with longer-stroke cylinder options.

Skip it if you need 27.6 inches of stroke; the SPARE PARTS HOLLAND SPH340375 lists that longer extension.

For buyers needing a two-stage cylinder with a 20-inch stroke and 12,800-pound thrust at 2900 PSI, this version offers defined hydraulic specifications. Its limited reach makes stroke matching essential before choosing it for a dump trailer.

Full product details
BrandSPARE PARTS HOLLAND
Manufacturer‎Spare Parts Holland

Listed on Amazon as: Hydraulic Cylinder, Telescopic Cylinder 12800Ibs, 20"–25 "–32" Stroke, 2 Stages (20 Inch)

View on Amazon

Check the full lift geometry, not just the stroke

A stated cylinder stroke alone does not establish that the cylinder will fit or raise a particular trailer body correctly. The products illustrate why: Primary Mover lists a 90-inch stroke for 8–12-foot bodies, 108 inches for 10–14-foot bodies, 120 inches for 12–16-foot bodies, and 168 inches for 20–24-foot bodies. Those pairings are useful screening clues, not a substitute for checking your trailer’s mount locations, closed length, required dump angle, and bed geometry against the manufacturer’s drawings.

A short-listed product can still be incompatible if its retracted dimensions or mounting arrangement do not match the trailer. Magister supplies a useful example of additional cylinder dimensions: its three-stage model is 44 inches retracted and 152 inches extended, with trunnion mounting.

Compare those measurements and mount style with your existing setup before treating a nominal stroke as a direct replacement.

A hydraulic mismatch can undermine a suitable cylinder

A cylinder’s listed capacity does not by itself confirm that your hydraulic system can operate it correctly. The Magister cylinder specifies a 3000 PSI rating, a 3.4-gallon oil volume, and an SAE 8 port; the Spare Parts Holland listings specify a maximum operating pressure of 2900 PSI. These differences make pressure limits, oil requirements, port connections, and pump compatibility important checks before installation.

The Primary Mover Standard Kit lists a high-flow power unit with an upgraded #8 SAE port, while the 168-inch kit description also mentions a power unit and hose assembly. Do not assume an existing pump, hose, or fitting matches solely because the cylinder is telescopic.

The Spare Parts Holland guidance also calls for a pressure limiter and filter and recommends regular oil checks and changes. Follow the specific product’s installation instructions and use appropriate support when working under a raised bed.

How to Choose a Dump Trailer Telescopic Cylinder

Match stroke to body and mounting geometry

Look first for a stroke and mounting arrangement that match your trailer, rather than choosing the longest cylinder available. The listed Primary Mover pairings range from 90 inches for 8–12-foot bodies to 168 inches for 20–24-foot bodies; its 108-inch kit is listed for 10–14-foot bodies and its 120-inch kit for 12–16-foot bodies. These are seller-stated fit ranges, not universal sizing rules.

Buyers replacing an existing unit should compare retracted and extended lengths, pin or trunnion mounts, and required lift geometry with the trailer’s specifications. The 168-inch option is aimed at longer bodies, while the 90-inch option targets shorter ones; neither should be chosen without confirming the actual installation dimensions.

Check capacity and pressure requirements

Choose a cylinder whose stated capacity and pressure rating suit the trailer and the hydraulic system. Primary Mover lists 20+ tons for its 90-inch kit and 30+ tons for the 108-, 120-, and 168-inch options. Magister lists 12-ton capacity and a 3000 PSI rating, while the Spare Parts Holland cylinders list 12,800 or 13,200 pounds of thrust at 2900 PSI.

These figures are not interchangeable measures, so verify how the listing defines capacity and compare it with the trailer and pump documentation. Buyers with a larger body may prioritize the listed 30+ ton kits; those seeking a replacement cylinder for a specified system should match the required pressure and capacity rather than relying on a broad tonnage comparison.

Decide whether you need a cylinder or a kit

Check the included components before ordering, because these listings range from standalone cylinders to hoist packages with additional hardware. The Primary Mover 120-inch Standard Kit lists a power unit, mounting brackets, hinges, safety prop arm, battery cables, fittings, and load control valve. Its 108-inch hoist-only kit lists the cylinder and upper and lower brackets, while the 90-inch kit lists the cylinder and brackets.

Magister’s listing is for a cylinder with trunnion mounting, and Spare Parts Holland’s 27.6-inch model lists a cylinder alone. Buyers building or upgrading a system may prefer a package with a power unit and hardware; replacement buyers may need only a cylinder, provided its dimensions, ports, and mount match their existing installation.

Which Dump Trailer Cylinder Should You Choose?

Choose Primary Mover 12K 120-Inch Standard Kit if your body is within its listed 12–16-foot range and you want a package with a power unit and extensive hardware. For a 10–14-foot body, Primary Mover 12K 108-Inch Hoist Kit lists 30+ tons capacity and upper and lower brackets. Longer bodies in the listed 20–24-foot range point to Primary Mover 12K 168-Inch Kit, while Primary Mover 7K 90-Inch Kit targets 8–12-foot bodies and 20+ tons.

If you need a standalone replacement and its 12-ton rating, dimensions, and trunnion mount match, consider Magister TSA12-3.108 Cylinder. The two Spare Parts Holland cylinders have shorter strokes and no listed body-fit range, so choose them only after confirming dimensions and hydraulic compatibility.

Frequently Asked Questions

How do I measure a dump trailer to determine the cylinder stroke and mounting points it requires?

Measure the trailer body length and the cylinder’s mounting geometry before choosing a stroke. Record the distance between mounting points with the bed lowered, then compare it with the available clearance and the bed’s required lift. Use the trailer or hoist manufacturer’s guidance to confirm the required stroke and mount type.

What pump flow, pressure, and hydraulic connections does my trailer need for a replacement cylinder?

Match the replacement cylinder to the trailer’s existing hydraulic system rather than assuming a connection or operating pressure. Check the pump’s stated flow and pressure, the cylinder’s rating, port and fitting types, and hose routing. Confirm compatibility with the trailer or hoist documentation before connecting or operating the system.

How should I safely support a raised dump bed while inspecting or servicing its cylinder?

Use the trailer’s designated safety prop or another properly rated mechanical support, and never rely on the hydraulic cylinder alone to hold a raised bed. Park on stable, level ground, secure the trailer against movement, and follow the manufacturer’s procedure. Keep clear of pinch points and do not work beneath an unsupported bed.

How do I choose between a standalone cylinder and a hoist kit?

Choose a standalone cylinder only when its rating, stroke, dimensions, mount, and hydraulic connections match your existing setup. A hoist kit may include additional components, but packages differ: some list brackets, while the Primary Mover 12K 120-Inch Standard Kit also lists a power unit and other hardware. Verify what your installation requires.

What should I verify when a product listing does not state a dump-body fit range?

Treat an unstated body-fit range as unknown, not as proof of compatibility. Compare the listed stroke and cylinder dimensions with your trailer’s required geometry, then confirm mounting and hydraulic requirements. The two Spare Parts Holland cylinders have shorter strokes and no listed body-fit range, so verify these details before selecting either.

Final Words

For a 12–16-foot dump body, the Primary Mover 12K 120-Inch Standard Kit is the lead choice when you want its listed power unit and extensive hardware. Match other options to their stated ranges: the 108-inch kit for 10–14 feet, the 168-inch kit for 20–24 feet, and the 90-inch kit for 8–12 feet. For replacements, confirm dimensions, mounting, and hydraulic compatibility before ordering.

Leave a Reply

Your email address will not be published. Required fields are marked *