A strong motorcycle hitch carrier combines a capacity above your bike’s loaded weight, a compatible receiver and a practical way to load and secure the bike. For riders hauling a motorcycle, dirt bike or scooter without a trailer, the products here range from a 400-pound aluminum rack to steel carriers rated for 600 pounds and an aluminum-and-steel option rated for 660 pounds. Several include ramps; the Mockins models add a tilting design, while select carriers include stabilizers or straps.
Before choosing, verify your vehicle’s hitch and payload limits, then check the carrier’s load rating and your bike’s dimensions. The comparison below highlights the specifications and included equipment that distinguish these ten options, rather than treating capacity alone as a guarantee of fit or safe transport.
Black Widow Steel Motorcycle Carrier is the leading all-around choice in this group for riders who want a motorcycle-specific hitch rack with a 600-pound capacity. It fits Class III or IV 2-inch receivers, uses powder-coated 14-gauge steel, and has grit-coated track and ramp surfaces. Its ramp attaches to the carrier for loading, and its listed capacity is higher than the 400-pound Black Widow aluminum option.
Check your vehicle’s hitch and payload limits and your motorcycle’s loaded weight before selecting any carrier.
Our Top Picks
Best OverallIts 600-pound rating, powder-coated 14-gauge steel, grit-coated ramp and track, and fit for Class III or IV 2-inch receivers suit motorcycle hauling.
View on Amazon
Highest CapacityThe 660-pound rating leads this selection; its 2-inch receiver fit, V-shaped wheel cradle, and accommodation for tires up to 6 inches add useful specifics.
View on Amazon
Longer RampThis steel carrier is rated for 600 pounds and includes a 47-inch ramp, ratchet straps, and stabilizer, making it a well-equipped motorcycle-hauling option.
View on Amazon- Tilting Ramp Mockins Tilting Carrier
- Aluminum Build VEVOR Aluminum Carrier
Compare motorcycle hitch carriers by capacity and features
| # | Product | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. Black Widow Steel CarrierBest Overall | 600 lb | Steel | Off-Road Motorcycle… | View on Amazon |
| 2 | 2. CRAVOT M1 Max CarrierHighest Capacity | 660 lb | — | Car | View on Amazon |
| 3 | 3. VEVOR Steel CarrierLonger Ramp | 600 lb | Q235B Steel | Car | View on Amazon |
| 4 | 4. Mockins Tilting CarrierTilting Ramp | 500 lb | Steel | Car, Truck, Van | View on Amazon |
| 5 | 5. Mockins Tilting Dirt Bike CarrierLong-term coverage for trail bikes | 500 lb | Steel | Car, Truck, Van | View on Amazon |
| 6 | 6. ECOTRIC 500LB CarrierFlexible approach for steel haulers | 500 lb | Steel | Vehicle with 2" square receiver (class II… | View on Amazon |
| 7 | 7. VEVOR Aluminum CarrierAluminum Build | 600 lb | Aluminum | Scooter | View on Amazon |
| 8 | 8. RIGMEC Two-Bike CarrierTwo-bike steel transport | 600 lb | Steel | Motorcycle | View on Amazon |
| 9 | 9. Black Widow Aluminum CarrierCompact ramp storage for e-bikes | 400 lb | Aluminum | Motorcycle | View on Amazon |
| 10 | 10. RIGMEC Steel CarrierPortable steel carrier with restraints | 600 lb | Carbon Steel, Metal | Motorcycle | View on Amazon |
Detailed Reviews: Best Hitch Carrier For Motorcycle

#1 · Best Overall
1. Black Widow Steel Carrier
- Load Capacity: 600 lb
- Material: Steel
- Compatible with Vehicle Type: Off-Road Motorcycle…
Best for: Traction-coated steel loading.
Why it ranks #1: Its 600-pound rating, powder-coated 14-gauge steel, grit-coated ramp and track, and fit for Class III or IV 2-inch receivers suit motorcycle hauling.
Grit-coated track and ramp surfaces give this 600-pound Black Widow steel carrier a traction-focused loading setup for motorcycles, dirt bikes, and scooters. Its ramp attaches on the right side, while Class III or IV 2-inch receiver compatibility identifies the hitch configuration it supports.
The grit-coat surfaces on both track and ramp are intended to aid traction while loading and unloading, making them central to this carrier’s workflow. The ramp attaches on the right side, so approach direction is fixed by the listed setup. Powder-coated 14-gauge steel supports a 600-pound capacity, and the carrier is specified for Class III or IV 2-inch hitches. Its stated motorcycle types include off-road, street-cruiser, and street-sport models.
- 600-pound load capacity
- Grit-coat traction surface on track and ramp
- Powder-coated 14-gauge steel construction
- Fits Class III or IV 2-inch receivers
- The ramp attaches only on the right side.
Skip it if you need to load from either side; the ECOTRIC AI-318 explicitly supports loading from both sides.
The Black Widow MCC-600 suits riders hauling a motorcycle, dirt bike, or scooter who value a traction-coated track and 600-pound rating. Its right-side ramp attachment and Class III or IV 2-inch receiver fit are boundaries.
Full product details
| Brand | Black Widow |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Off-Road Motorcycle, street-cruiser-motorcycles, street-sport-motorcycles |
| Included Components | MCC-600 |
| Item Weight | 98 pounds |
| Load Capacity | 600 lb |
| Manufacturer | Black Widow |
| Part Number | MCC-600 |
| Manufacturer Warranty Description | 1 Year |
| Material | Steel |
| Model Number | MCC-600 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Black Widow Steel Motorcycle Hitch Carrier, Wheel Chock, 600 lb, 2 In Hitch
View on Amazon
#2 · Highest Capacity
2. CRAVOT M1 Max Carrier
- Load Capacity: 660 lb
- Compatible with Vehicle Type: Car
Best for: High-capacity wide-wheelbase hauling.
Why it ranks #2: The 660-pound rating leads this selection; its 2-inch receiver fit, V-shaped wheel cradle, and accommodation for tires up to 6 inches add useful specifics.
A 660-pound capacity is the central draw of the CRAVOT Motorack M1 Max, which also specifies support for dirt e-bikes with tires up to 6 inches wide and wheelbases up to 60 inches. Its V-shaped cradle and retractable straps add positioning and securing features.
The V-shaped front wheel cradle accommodates a variety of tire sizes, while the stated 6-inch tire-width and 60-inch wheelbase ceilings clarify the fit range for dirt e-bikes. At 660 pounds, its listed capacity exceeds the other supplied carrier ratings, giving heavier-bike owners more rated headroom. An anti-rattle device and built-in retractable straps address movement and tie-down workflow. The carrier fits a 2-inch receiver, and its aluminum-and-steel construction combines the two listed materials.
- 660-pound load capacity
- Accommodates tires up to 6 inches wide and wheelbases up to 60 inches
- V-shaped front wheel cradle
- Anti-rattle device and built-in retractable straps
- The supplied fit details specify dirt e-bikes, not a broader vehicle or motorcycle range.
Skip it if you need listed compatibility beyond a car with a 2-inch receiver; the Mockins MA-HM-DBC-83-TILT-96 lists cars, trucks, and vans.
The Motorack M1 Max suits owners of heavier dirt e-bikes who need its 660-pound rating, wide-tire allowance, and retractable securing straps. Its stated vehicle compatibility is car, with a 2-inch receiver required.
Full product details
| Brand | CRAVOT |
|---|---|
| Color | Black-M1 Max |
| Compatible with Vehicle Type | Car |
| Included Components | Security Lock |
| Load Capacity | 660 pounds |
| Manufacturer | CRAVOT |
| Part Number | M1 MAX |
| Manufacturer Warranty Description | 1 Year Warranty |
| Model Number | M1 MAX |
Listed on Amazon as: Motorack M1 Max Motorbike Carrier with Ramp, 660lbs Capacity
View on Amazon
#3 · Longer Ramp
3. VEVOR Steel Carrier
- Load Capacity: 600 lb
- Material: Q235B Steel
- Compatible with Vehicle Type: Car
Best for: Long ramp for heavier motorcycles.
Why it ranks #3: This steel carrier is rated for 600 pounds and includes a 47-inch ramp, ratchet straps, and stabilizer, making it a well-equipped motorcycle-hauling option.
A 47-inch ramp and 600-pound capacity make this VEVOR steel carrier a practical match for riders who want a longer loading surface and substantial rated support. Its 76-by-7-inch track provides the listed platform dimensions, while the recommended installation height narrows vehicle-side planning.
The 47-inch ramp gives the loading setup its specified length, and the 600-pound rating defines the maximum listed load. A 76-by-7-inch carrier track provides the stated space for positioning a motorcycle. VEVOR recommends an installation height of 7.87 to 19.7 inches, measured from center hole to ground, so buyers can assess the hitch position before use. The Q235B steel construction and 2-inch hitch fit identify its material and receiver requirement; listed included components name the carrier only.
- 600-pound load capacity
- 47-inch longer ramp
- 76-by-7-inch carrier track
- Recommended center-hole height is specified as 7.87 to 19.7 inches
- The listed included components name the carrier only, without straps or a stabilizer.
Skip it if you want listed straps and a stabilizer included; the Black Widow MCC-600's supplied details include its ramp and traction-coated track.
This VEVOR suits riders seeking a 600-pound steel carrier with a 47-inch ramp and known installation-height guidance. It requires a 2-inch hitch, and its listed included-components entry does not name tie-down straps or a stabilizer.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car |
| Included Components | 1 x Motorcycle Hitch Carrier |
| Item Dimensions | 77 x 33.1 x 6.1 inches |
| Item Weight | 61.7 pounds |
| Dimensions | 77 x 33.1 x 6.1 inches |
| Load Capacity | 600 pounds |
| Manufacturer | VEVOR |
| Part Number | 600 LBS Steel Motorcycle Carrier |
| Material | Q235B Steel |
| Model Number | TD-1004-03 |

#4 · Tilting Ramp
4. Mockins Tilting Carrier
- Load Capacity: 500 lb
- Material: Steel
- Compatible with Vehicle Type: Car, Truck, Van
Best for: Tilting rack for wide tires.
Why it ranks #4: Its 500-pound capacity, 83-inch frame, tilting ramp, 2-inch receiver fit, hitch lock, stabilizer, and four ratchet straps make loading and securing practical.
A tilting 83-inch steel frame supports loads up to 500 pounds and tires up to 5.5 inches wide, giving dirt-bike and e-bike owners room for broader tires plus a loading setup intended to ease mounting and dismounting. Its kit also includes straps, a hitch lock, and a stabilizer.
The tilting ramp is intended to make loading and dismounting easier, while the 83-by-6-inch frame provides a long track for compatible light motorcycles, scooters, dirt bikes, and e-bikes. Tire width up to 5.5 inches and a 500-pound limit set practical fit boundaries. The included four ratchet straps and four loop straps provide tie-down hardware, and the hitch stabilizer and lock address movement and securing at the receiver. It fits 2-inch receivers.
- Tilting ramp supports easier mounting and dismounting
- 500-pound load capacity
- Accommodates tires up to 5.5 inches wide
- Includes four ratchet straps, four loop straps, stabilizer, and hitch lock
- The listed 500-pound capacity is below the 600-pound options.
Skip it if you need a 600-pound rating; the VEVOR TD-1004-03 lists that higher capacity for its steel carrier.
This Mockins suits riders hauling a compatible dirt bike, scooter, or e-bike who value a tilting loading arrangement and supplied tie-downs. Check the 500-pound total limit, 5.5-inch tire ceiling, and 2-inch receiver requirement.
Full product details
| Brand | Mockins |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car, Truck, Van |
| Included Components | 1 x Hitch Mount Motorcycle Carrier with Tilting Ramp (Patent Pending) with 1 x License Plate Holder, 1 x Hitch Stabilizer and 1 x Hitch Lock, 1 x Set of Reflector Stickers, 1 x Storage Bag for Accessories, 4 x Heavy-Duty Ratchet Straps and 4 x Strong Loop Straps |
| Item Dimensions | 83 x 6 x 8 inches |
| Item Weight | 75 pounds |
| Dimensions | 83 x 6 x 8 inches |
| Load Capacity | 500 Pounds |
| Manufacturer | Mockins |
| Part Number | MA-HM-DBC-83-TLTS-96 |
| Manufacturer Warranty Description | 5 Year Limited Warranty |
| Material | Steel |
| Model Number | MA-HM-DBC-83-TLTS-96 |
Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity
View on Amazon
#5
5. Mockins Tilting Dirt Bike Carrier
- Load Capacity: 500 lb
- Material: Steel
- Compatible with Vehicle Type: Car, Truck, Van
Best for: Long-term coverage for trail bikes.
Why it ranks #5: The 500-pound steel rack has an 83-inch frame, tilting ramp, hitch lock, stabilizer, and four ratchet straps; its listing also specifies a 10-year limited warranty.
A 10-year limited warranty distinguishes this 500-pound Mockins carrier, while its tilting ramp and 83-inch steel track serve riders loading dirt bikes, scooters, or e-bikes. The stated 5.5-inch tire-width limit helps identify whether wider-tire machines fall within its supported range.
The tilting ramp is intended to ease mounting and dismounting, reducing the need to handle the bike without a loading aid. Its 83-by-6-inch steel track supports loads up to 500 pounds and tires up to 5.5 inches wide, giving buyers concrete limits for checking their machine. A 2-inch receiver fit defines vehicle-side compatibility. The kit includes four ratchet straps, a loop strap, hitch stabilizer, lock, and license plate holder, helping cover securing and transport details.
- 10-year limited warranty
- Tilting ramp for loading and dismounting
- 500-pound capacity and 5.5-inch tire-width limit
- Includes hitch stabilizer, hitch lock, straps, and plate holder
- Its 500-pound capacity is lower than the 600-pound carriers.
Skip it if you need a 600-pound capacity; the Black Widow MCC-600 is listed for loads up to 600 pounds.
Pick this Mockins for a compatible bike under 500 pounds when a tilting ramp, supplied securing hardware, and long limited-warranty coverage matter. Its 2-inch receiver and 5.5-inch maximum tire width remain fit boundaries.
Full product details
| Brand | Mockins |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car, Truck, Van |
| Included Components | 1 x Hitch Stabilizer and 1 x Hitch Lock, 1 x License Plate Holder, 1 x Storage Bag for Accessories, 1 x Tilting Ramp Motorcycle Carrier (Patent Pending), 4 x Heavy-Duty Ratchet Straps and 4 x Strong Loop Strap |
| Item Dimensions | 83 x 6 x 8 inches |
| Item Weight | 78 pounds |
| Dimensions | 83 x 6 x 8 inches |
| Load Capacity | 500 Pounds |
| Manufacturer | Mockins |
| Part Number | MA-HM-DBC-83-TILT-96 |
| Manufacturer Warranty Description | 10 Year Limited Warranty |
| Material | Steel |
| Model Number | MA-HM-DBC-83-TILT-96 |
Listed on Amazon as: Mockins 83" Tilting Dirt Bike Carrier Hitch Mount Rack w/ 500 Lbs. Capacity
View on Amazon
#6
6. ECOTRIC 500LB Carrier
- Load Capacity: 500 lb
- Material: Steel
- Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…
Best for: Flexible approach for steel haulers.
Why it ranks #6: Its 500-pound steel frame fits 2-inch square receivers across Class II through V hitches and includes a ramp, with loading possible from either side.
Loading from either side is this ECOTRIC carrier’s practical distinction, giving riders flexibility to approach the motorcycle rack from the more convenient side of the vehicle. Its ramp, 500-pound capacity, and compatibility with 2-inch Class II through V receivers add useful loading and hitch details.
The included ramp supports loading onto the steel frame, while the two-sided loading option lets the approach direction adapt to the parking setup. Its 500-pound capacity establishes the supported load ceiling. Compatibility spans 2-inch square Class II, III, IV, or V trailer-hitch receivers, a broader stated class range than products limited to Class III or IV. High-strength steel is described as resisting flaking, scratching, fading, and wear, which speaks to the frame’s durability during regular handling.
- Loading access from either side
- Includes a loading ramp
- 500-pound load capacity
- Fits 2-inch Class II, III, IV, or V square receivers
- Its listed 500-pound capacity is lower than the 600-pound carriers.
Skip it if you need a 600-pound rating; the RIGMEC 9C7O4EBHV lists a 600-pound capacity for its steel carrier.
Choose this ECOTRIC for a motorcycle within 500 pounds when two-sided loading and compatibility across 2-inch Class II through V receivers suit your setup. The stated square-receiver size and weight limit are the essential boundaries.
Full product details
| Brand | ECOTRIC |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Vehicle with 2" square receiver (class II, III, IV, OR V trailer hitch) |
| Included Components | 1 x complete set of motorcycle trailer hitch carrier+installation instruction+mounting hardware |
| Item Dimensions | 75.91 x 32.24 x 9.06 inches |
| Dimensions | 75.91 x 32.24 x 9.06 inches |
| Load Capacity | 500 Pound |
| Manufacturer | Ainuosen |
| Part Number | AI-318 |
| Material | Steel |
| Model Number | AI-318 |
Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch
View on Amazon
#7 · Aluminum Build
7. VEVOR Aluminum Carrier
- Load Capacity: 600 lb
- Material: Aluminum
- Compatible with Vehicle Type: Scooter
Best for: Aluminum carrier with stored ramp.
Why it ranks #7: The aluminum rack is rated for 600 pounds and has a self-storing 3.9-foot ramp, a useful combination for buyers seeking an alternative to steel.
A self-storing 3.9-foot ramp lets this 600-pound VEVOR aluminum carrier keep its loading aid attached when idle, reducing separate ramp stowage. The product listing also claims capacity to carry two motorcycles, making its stated load arrangement distinct from a single-bike-focused carrier.
The 3.9-foot ramp supports roll-on loading and attaches to the carrier when unused, keeping the ramp with the rack between trips. Aluminum construction distinguishes the frame material, while the 600-pound capacity sets the total stated load ceiling. The listing says it can carry two motorcycles, so buyers should consider that combined load rather than treating the rating as per bike. Its dimensions are 74.8 by 59.06 by 4.72 inches, relevant when assessing rack space and storage.
- 600-pound load capacity
- Listing states it can carry two motorcycles
- Self-storing 3.9-foot ramp
- Aluminum construction
- The 600-pound rating is a total capacity, not a stated per-motorcycle allowance.
Skip it if you need a steel carrier with a listed 47-inch ramp; the VEVOR TD-1004-03 specifies a 47-inch ramp and steel construction.
Consider this VEVOR for riders seeking an aluminum carrier with an attached-when-stored ramp and a listed two-motorcycle capability. Keep the 600-pound total limit and the rack’s substantial stated dimensions in view.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Scooter |
| Included Components | 1 x Motorcycle Hitch Carrier |
| Item Dimensions | 74.8 x 59.06 x 4.72 inches |
| Item Weight | 68.3 pounds |
| Dimensions | 74.8 x 59.06 x 4.72 inches |
| Load Capacity | 600 Pounds |
| Manufacturer | VEVOR |
| Part Number | Aluminum Motorcycle Carrier 600 LBS |
| Material | Aluminum |
| Model Number | TD-1004-08 |
Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount
View on Amazon
#8
8. RIGMEC Two-Bike Carrier
- Load Capacity: 600 lb
- Material: Steel
- Compatible with Vehicle Type: Motorcycle
Best for: Two-bike steel transport.
Why it ranks #8: It is listed for two motorcycles with a 600-pound total capacity and includes a self-storing 47-inch ramp; confirm the per-track limit for your bikes.
A 600-pound total rating across two tracks makes this RIGMEC carrier suited to riders transporting two motorcycles on one hitch rack. Its self-storing 47-inch ramp attaches when not in use, and the listing specifies a 400-pound allowance per track for load planning.
The two-track arrangement is listed for up to two motorcycles, with 600 pounds total and 400 pounds per track; both figures matter when distributing bike weight. The 47-inch ramp rolls bikes on and attaches to the carrier for storage, avoiding a separate ramp location. Steel construction provides the stated frame material. The supplied description also names ratchet straps and an anti-rattle stabilizer, which address tie-down and hitch movement, while the receiver requirement is 2 inches.
- Carries up to two motorcycles
- 600-pound total capacity with 400 pounds per track
- Self-storing 47-inch loading ramp
- Description lists ratchet straps and an anti-rattle stabilizer
- Its 600-pound total capacity is lower than the CRAVOT M1 MAX's 660-pound rating.
Skip it if you need a single carrier rated above 600 pounds; the CRAVOT M1 Max lists a 660-pound capacity.
This RIGMEC suits riders transporting two motorcycles who can stay within both the 600-pound combined limit and 400 pounds per track. Its 2-inch receiver, steel construction, and attached ramp storage define the setup.
Full product details
| Brand | RIGMEC |
|---|---|
| Color | Black for 2 bikes |
| Compatible with Vehicle Type | Motorcycle |
| Item Weight | 85.3 pounds |
| Load Capacity | 600 Pounds |
| Manufacturer | RIGMEC |
| Part Number | Motorcycle Carrier 600 LBS |
| Material | Steel |
| Model Number | BGH6JMYT7765 |
Listed on Amazon as: Heavy Duty 600 lb Motorcycle Hitch Carrier for 2 Bikes
View on Amazon
#9
9. Black Widow Aluminum Carrier
- Load Capacity: 400 lb
- Material: Aluminum
- Compatible with Vehicle Type: Motorcycle
Best for: Compact ramp storage for e-bikes.
Why it ranks #9: This aluminum carrier weighs less by material choice and includes a ramp and anti-tilt device, but its 400-pound capacity is the lowest listed here.
A 400-pound aluminum carrier pairs roll-on loading with a ramp that attaches flat when idle, helping motorcycle and e-bike owners avoid a bulky trailer while keeping the loading hardware compact between trips. Its 2-inch receiver fit and included anti-rattle device address mounting and movement concerns during transport.
The ramp can be installed on either side, giving you flexibility to approach the carrier from the more convenient side of your vehicle. When loading is finished, it secures flat against the carrier, so the ramp has a defined storage place rather than needing separate stowage. Aluminum construction keeps the carrier material distinct from steel alternatives, while the included anti-rattle device minimizes movement. The 400-pound capacity sets the load boundary, and the 2-inch Class III or IV receiver specification defines the hitch fit.
- 400-pound load capacity
- Aluminum construction
- Ramp installs on either side and secures flat when unused
- Anti-rattle device is included
- Its 400-pound capacity is lower than the 500- and 600-pound options.
Skip it if you need to carry a motorcycle exceeding 400 pounds; the VEVOR TD-1004-03 lists a 600-pound capacity.
Choose this Black Widow for a motorcycle or e-bike within 400 pounds when compact ramp storage and a two-sided loading approach matter. Its 2-inch Class III or IV receiver fit and load limit define the key boundaries.
Full product details
| Brand | Black Widow |
|---|---|
| Color | metallic |
| Compatible with Vehicle Type | Motorcycle |
| Included Components | Anti-tilt device, Loading ramp, Youth bike spacer adapter bar |
| Load Capacity | 400 lb |
| Manufacturer | Black Widow |
| Part Number | AMC-400 |
| Manufacturer Warranty Description | 1 Year |
| Material | Aluminum |
| Model Number | AMC-400 |
Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb
View on Amazon
#10
10. RIGMEC Steel Carrier
- Load Capacity: 600 lb
- Material: Carbon Steel, Metal
- Compatible with Vehicle Type: Motorcycle
Best for: Portable steel carrier with restraints.
Why it ranks #10: The 600-pound steel carrier includes a ramp and anti-tilt device, but its listing offers fewer receiver-fit details and included securing components than higher-ranked options.
Four ratchet straps and hook stabilizers are listed with this 600-pound RIGMEC carrier, giving riders supplied restraint points for reducing wobble during transport. Its longer ramp supports loading, and the steel frame is described as portable and quick to assemble.
The longer ramp provides the loading aid, while the four ratchet straps and hook stabilizers are specifically described as reducing wobbling and adding security during a journey. A 600-pound capacity sets the maximum listed load, and the carbon-steel and metal construction identifies the frame materials. The product is intended for cars and trucks with a 2-inch hitch receiver. Its 77-by-32.5-by-5-inch dimensions help buyers consider the carrier’s footprint during mounting and storage.
- 600-pound load capacity
- Longer loading ramp
- Four ratchet straps and hook stabilizers
- 77-by-32.5-by-5-inch dimensions are specified
- The supplied details do not specify a ramp length.
Skip it if you need a stated 47-inch ramp length; the VEVOR TD-1004-03 explicitly lists that measurement.
This RIGMEC fits riders seeking a 600-pound steel carrier with supplied ratchet restraints and hook stabilizers for a car or truck. Its 2-inch receiver requirement and unspecified ramp length are relevant fit and loading boundaries.
Full product details
| Brand | RIGMEC |
|---|---|
| Color | Black-1 |
| Compatible with Vehicle Type | Motorcycle |
| Item Dimensions | 77 x 32.5 x 5 inches |
| Item Weight | 19 kg |
| Dimensions | 77 x 32.5 x 5 inches |
| Load Capacity | 600 pounds |
| Manufacturer | RIGMEC |
| Part Number | 9C7O4EBHV |
| Material | Carbon Steel, Metal |
Listed on Amazon as: Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with Longer Ramp, Scooter Dirt Bike Trailer Hauler, for Car, Truck with 2" Hitch Receiver
View on AmazonCheck the whole hitch system, not just the rack rating
A carrier’s stated load capacity does not establish that your vehicle can carry the combined load safely. The bike, carrier and any accessories all add weight at the hitch, so check your vehicle and receiver documentation for applicable limits before buying. This matters particularly with the listed steel carriers: the Black Widow steel model itself weighs 98 pounds, while the VEVOR steel carrier weighs 61.7 pounds.
The product data does not give vehicle payload or tongue-weight limits, so those must come from your vehicle and hitch specifications. Also verify the receiver size and class: Black Widow specifies Class III or IV 2-inch receivers, while ECOTRIC states fit for 2-inch square receivers across Class II through V.
A nominally suitable carrier is not a match if its receiver requirements or the complete loaded setup exceed the vehicle’s limits.
Ramp fit and loading geometry can make or break the setup
A ramp that stores on the carrier helps keep the loading piece with the rack, but it does not confirm that your particular loading approach will work. The Black Widow aluminum option says its ramp installs on either side and secures flat when unused; the Black Widow steel model places its ramp on the right side. The Mockins listings use a tilting ramp design, while VEVOR’s aluminum model specifies a self-storing 3.9-foot ramp.
CRAVOT lists a wheelbase limit of 60 inches, and its tire-width limit is 6 inches; Mockins specifies tires up to 5.5 inches. Measure your motorcycle’s wheelbase and tire width against the product’s stated limits, and check available clearance around your vehicle.
The listings do not provide a universal loading-angle or ground-clearance guarantee, so do not assume a ramp will suit every vehicle height or driveway.
How to Choose a Motorcycle Hitch Carrier
Capacity and loaded bike weight
Choose a carrier whose listed capacity exceeds the motorcycle’s actual loaded weight, and separately verify the vehicle and hitch limits. These options range from 400 pounds for the Black Widow aluminum carrier, through 500 pounds for Mockins and ECOTRIC models, to 600 pounds for several steel and aluminum racks. CRAVOT lists the group’s highest rating at 660 pounds.
Riders with lighter bikes may have more choices, including the 400-pound aluminum option; heavier-bike owners should focus on the higher-rated carriers but must not treat a carrier rating as proof that the vehicle can support the load. The RIGMEC two-bike listing gives 600 pounds total and 400 pounds per track, so two-bike buyers should check both figures against their intended load.
Receiver and bike dimensions
Match the carrier to the receiver and check the dimensions the product actually states. Black Widow specifies Class III or IV 2-inch receivers, and ECOTRIC lists 2-inch square receiver compatibility across Class II, III, IV and V. The Mockins carriers specify a 2-inch receiver; CRAVOT also requires a 2-inch receiver and lists tires up to 6 inches wide and a wheelbase up to 60 inches.
Mockins lists tire widths up to 5.5 inches. That makes the CRAVOT’s stated width limit more suitable for a wider-tire bike among these options, while a conventional-size dirt bike may fit several.
Some listings omit bike dimensions, so contact the seller or verify fit before relying on a carrier for an unusually wide tire or long wheelbase.
Material, ramp and included securing gear
Compare the construction and loading equipment with the way you plan to transport the bike. The products include aluminum options from Black Widow and VEVOR, and steel options from Mockins, ECOTRIC, VEVOR and Black Widow; the listed Black Widow steel carrier weighs 98 pounds, while VEVOR’s steel model weighs 61.7 pounds. Ramp features vary: VEVOR aluminum lists a self-storing 3.9-foot ramp, VEVOR steel lists a 47-inch ramp, and the Mockins products use tilting ramps.
Included securing gear also differs: Mockins lists four ratchet straps and a hitch stabilizer, while VEVOR steel includes ratchet straps and a stabilizer. Buyers prioritizing an all-in-one listed package may favor Mockins or VEVOR steel; buyers prioritizing aluminum construction can compare the two aluminum options.
Which Motorcycle Hitch Carrier Should You Choose?
For a general motorcycle-hauling choice, pick Black Widow Steel Carrier: its 600-pound capacity, 2-inch Class III or IV receiver fit, grit-coated track and ramp make its use case clear. If you need the highest listed capacity and your bike fits its stated limits, choose CRAVOT M1 Max Carrier, rated to 660 pounds and specified for tires up to 6 inches wide and a 60-inch wheelbase. For a 47-inch ramp with straps and stabilizer, consider VEVOR Steel Carrier.
Riders who value a tilting ramp and a listed hitch lock, stabilizer and four ratchet straps can compare Mockins Tilting Carrier. For aluminum construction, consider VEVOR Aluminum Carrier at 600 pounds or Black Widow Aluminum Carrier at 400 pounds.
Check bike weight, dimensions, receiver fit and vehicle limits before ordering.
Related Buying Guides
- Best Motorcycle Trailer Hitch Carrier
- Best Hitch Mount Motorcycle Carrier
- Best Aluminum Motorcycle Hitch Carrier
- Best Dual Motorcycle Hitch Carrier
- Best Bike Carrier For Hitch
- Best Trailer Hitch Carrier
Frequently Asked Questions
How do I check whether my vehicle can safely carry a motorcycle hitch carrier and bike?
Check your vehicle’s payload limit and the hitch receiver’s rating, then account for the combined loaded weight of the carrier and motorcycle. Confirm the receiver size and class are compatible with the carrier. If any limit or compatibility detail is unclear, consult your vehicle and hitch documentation before loading.
How should I secure a motorcycle on a hitch carrier for a long trip?
Follow the carrier’s instructions, load the bike using the supplied or compatible ramp, and secure it with suitable straps at stable points. Check that the bike is upright and cannot shift, and inspect the carrier, hitch connection and straps before departure and during stops. Do not exceed any stated limits.
What bike dimensions should I measure before choosing a hitch carrier?
Measure the motorcycle’s overall length, tire width and wheelbase, then compare those figures with the carrier’s track and ramp dimensions or stated fit limits. Also check the motorcycle’s loaded weight against the carrier capacity. For example, the CRAVOT M1 Max listing specifies tires up to 6 inches wide and a 60-inch wheelbase.
What receiver size and class should I look for?
Match the carrier to your vehicle’s receiver size and class, and verify the hitch rating before choosing. The Black Widow Steel listing specifies a 2-inch Class III or IV receiver, while some other supplied titles specify a 2-inch receiver without listing a class. Check the product details and your vehicle documentation.
Should I prioritize a ramp, stabilizer, straps or hitch lock?
Choose features that suit your loading and securing needs, and verify what is included in the specific listing. The VEVOR steel listing mentions a 47-inch ramp, ratchet straps and stabilizer; the Mockins tilting listing mentions a hitch lock, stabilizer and four ratchet straps. Do not assume other carriers include these items.
Final Words
For a general motorcycle-hauling choice, the Black Widow Steel Carrier stands out with its 600-pound capacity and specified 2-inch Class III or IV receiver fit. Choose the CRAVOT M1 Max if its 660-pound rating and stated bike limits suit your motorcycle. Compare ramp and accessory details for other options, and consider aluminum models if that construction is your preference.
Before ordering, verify bike weight and dimensions, receiver compatibility, and vehicle hitch and payload limits.


