Best Studs For Snowmobile Track: Compare 10 Options

Best Studs For Snowmobile Track

A strong snowmobile track stud choice matches your track’s construction and lug height, then adds the traction hardware or installation parts your setup requires. The Woody’s Gold Digger Traction Master 1325 Series is a standout for two-ply tracks with 1.220- to 1.250-inch lugs, while complete Fast-Trac kits suit buyers who want backers, nuts, and installation tools in one package. This roundup also includes screw-in options that avoid drilling, individual stud sizes, and a high-count kit intended for a specific one-ply Ski-Doo fit.

Those differences matter: a stud that is too long or intended for another track type may not suit your sled. Check the product’s fit notes against your track before choosing, and treat included tunnel protectors as a separate requirement where they are not supplied.

The Woody’s Gold Digger Traction Master 1325 Series leads because it is explicitly intended for two-ply tracks with 1.220- to 1.250-inch lug heights. Its 24-piece pack includes studs and nuts, and the through-hardened carbon-steel construction has a 60-degree carbide insert and a patented track-trapping head. It is a focused choice for the stated track fit, rather than a universal kit.

Confirm your track construction and lug height before ordering; the listed fit range is specific.

Our Top Picks

Woody's Gold Digger 1325Best Overall

Woody's Gold Digger 1325

Designed for two-ply tracks with 1.220- to 1.250-inch lugs; the 24-piece pack includes nuts and uses a 60-degree carbide insert.

View on Amazon
Fast-Trac Top Gun II KitBest 2-Ply Kit

Fast-Trac Top Gun II Kit

Its 96-stud kit is specified for 1.25- or 1.35-inch two-ply tracks and includes backers, nuts, a template, and installation tools.

View on Amazon
Fast-Trac Top Gun SP KitBest 1-Ply Kit

Fast-Trac Top Gun SP Kit

The 144-count kit is designated for OEM Ski-Doo 1.25- or 1.35-inch one-ply tracks, with backers, nuts, and installation tools included.

View on Amazon

Compare Snowmobile Track Stud Options

#ProductWeightMaterialThread SizeBuy
11 lb——View on Amazon
26.76 lb——View on Amazon
3—Stainless Steel1/4-20View on Amazon
44.8 lbStainless Steel1.325"View on Amazon
5—Carbide—View on Amazon
6
Woody's Signature 1.075 Studs6. Woody's Signature 1.075 StudsShorter-lug 96-stud setup
5 lbStainless Steel1/4-20View on Amazon
7
Hornet Rimless Studs7. Hornet Rimless StudsThin-head, rimless-tip studs
—Alloy Steel1/4-inch 20View on Amazon
8
IGrip ST-24150R Studs8. IGrip ST-24150R StudsLarge screw-in stud quantity
11.7 oz——View on Amazon
9
Stud Boy SPT Carbide Stud9. Stud Boy SPT Carbide StudSingle-size carbide stud listing
1.07 lb——View on Amazon
10
Aulpq Winter Tire Studs10. Aulpq Winter Tire StudsBulk winter tire-screw pack
——1/2"View on Amazon

Detailed Reviews: Best Studs For Snowmobile Track

Woody's Gold Digger 1325

#1 · Best Overall

1. Woody's Gold Digger 1325

  • Weight: 1 lb

Best for: Two-ply trail and boondocking setup.

Why it ranks #1: Designed for two-ply tracks with 1.220- to 1.250-inch lugs; the 24-piece pack includes nuts and uses a 60-degree carbide insert.

A patented track-trapping 1-inch head is the defining feature of Woody’s 1325 Series, providing rigidity and support as the studs work to improve starting, stopping, and turning. This 24-piece set includes matching nuts and targets two-ply tracks with 1.220- to 1.250-inch lug heights.

Through-hardened carbon steel and a 60-degree carbide insert pair a hardened stud body with a carbide contact point, supporting traction use on trails or while boondocking. The track-trapping head adds support at the track, while the stated lug-height range helps identify the intended application before installation. With 24 studs and 24 nuts in the pack, buyers have matched fastening hardware included; the two-ply-track requirement remains an important fit boundary.

Pros
  • Patented 1-inch track-trapping head
  • 60-degree carbide insert
  • Through-hardened carbon steel
  • Includes 24 studs and 24 nuts
Cons
  • Intended for two-ply tracks with 1.220- to 1.250-inch lugs.

Skip it if you have a one-ply track or lug height outside 1.220 to 1.250 inches; this series is specified for a narrower track setup.

This set suits riders seeking a supported push-through stud arrangement for two-ply trail or boondocking use. Check the stated lug-height range and track construction against your setup; its compatibility is not presented as universal.

Full product details
BrandWoody's
Item Weight‎1 pounds
Item model number‎1250-0260
Manufacturer‎Woody's
Part Number‎1250-0260
Model‎Gold Digger Traction Master 1325 Series
Dimensions‎8 x 6 x 3 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Woody's Gold Digger Traction Master 1325 Series Snowmobile Studs – 24 Piece Pack

View on Amazon
Fast-Trac Top Gun II Kit

#2 · Best 2-Ply Kit

2. Fast-Trac Top Gun II Kit

  • Weight: 6.76 lb

Best for: 96-stud two-ply kit with tools.

Why it ranks #2: Its 96-stud kit is specified for 1.25- or 1.35-inch two-ply tracks and includes backers, nuts, a template, and installation tools.

A complete 96-stud kit with a track drill template and cutting tool makes the Fast-Trac Top Gun II a practical choice for a planned installation. Its heat-treated stainless-steel studs use 80-degree mining-grade carbide tips, and the listing specifies Arctic Cat, Polaris, and Yamaha 1.25/1.35 two-ply tracks.

The kit combines 1.375-inch Top Gun II studs with Air Lite XL backers and stainless-steel nuts, so the core fastening parts arrive together. Heat-treated stainless steel and rust-free nuts support the stated corrosion-resistant package, while the DuPont-blend backers are described as durable and use a track-friendly radius edge. A marker, T25 Torx bit, track-cutting tool, and template support layout and installation. Tunnel protectors are not included, which affects the remaining parts list.

Pros
  • 96-stud complete kit
  • 80-degree mining-grade carbide tips
  • Track drill template and cutting tool included
  • Air Lite XL backers and stainless-steel nuts
Cons
  • Tunnel protectors are not included.

Skip it if you need a one-ply Ski-Doo-specific kit; Fast-Trac Top Gun SP is listed for OEM Ski-Doo 1.25/1.35 one-ply tracks.

This package fits buyers planning a 96-stud installation on the listed Arctic Cat, Polaris, or Yamaha two-ply track applications. Use the included layout tools, and account separately for tunnel protectors, which are excluded.

Full product details
BrandFast-Trac
Item Weight‎6.76 pounds
Item model number‎159B96SK
Manufacturer‎Fast-Trac
Part Number‎159B96SK
Model‎1.375" Top Gun II Kit
Dimensions‎8 x 6 x 4 inches

Listed on Amazon as: Fast-Trac 1.375” Top Gun II Snowmobile Studs Kit Qty 96, Rust-Free & Lightweight, Includes Install Tools & Template, for Arctic Cat, Polaris, Yamaha 1.25/1.35 2-Ply Tracks

View on Amazon
Fast-Trac Top Gun SP Kit

#3 · Best 1-Ply Kit

3. Fast-Trac Top Gun SP Kit

  • Material: Stainless Steel
  • Thread Size: 1/4-20

Best for: 144-stud Ski-Doo one-ply kit.

Why it ranks #3: The 144-count kit is designated for OEM Ski-Doo 1.25- or 1.35-inch one-ply tracks, with backers, nuts, and installation tools included.

A 144-stud count and explicit OEM Ski-Doo one-ply application distinguish this Fast-Trac Top Gun SP kit, making it a targeted choice for the listed 1.25/1.35 track sizes. It includes installation tools and a template alongside heat-treated stainless-steel studs with 80-degree carbide tips.

The kit pairs 1.375-inch Top Gun SP studs with Air Lite SP backers and stainless-steel nuts, consolidating key mounting components in one package. Heat-treated stainless steel and the listing’s rust-free description inform material selection, while DuPont-blend backers are described as durable. The track-cutting tool, marker, T25 Torx bit, and drill template support layout and installation. It is specified for OEM Ski-Doo 1.25/1.35 one-ply tracks; tunnel protectors are explicitly excluded.

Pros
  • 144-stud complete kit
  • Specified for OEM Ski-Doo 1.25/1.35 one-ply tracks
  • Track cutting tool and drill template included
  • Stainless-steel studs and lock nuts
Cons
  • Tunnel protectors are not included.

Skip it if you have a two-ply track or a listed Arctic Cat, Polaris, or Yamaha application; Fast-Trac Top Gun II is specified for those two-ply setups.

This kit suits buyers installing a high-count stud set on the listed OEM Ski-Doo 1.25/1.35 one-ply tracks. Its tools and template support the workflow, but tunnel protectors must be accounted for separately.

Full product details
BrandFast-Trac
ColorBlack
Compatible Groove Diameter1.38 inches
Included ComponentsStud, Nut, Backer, Template, Track Cutting Tool, Paint Marker, T25 Bit
Item Dimensions8 x 6 x 6 inches
Dimensions8 x 6 x 6 inches
ManufacturerFast-Trac
MaterialStainless Steel
Model920X-144SK
Screw Head StyleFlat
SizeOne Size
Size NameOne Size
Thread Size1/4-20
Warranty DescriptionLifetime Warranty Against Breakage

Listed on Amazon as: Fast-Trac 1.375” Top Gun SP Snowmobile Studs Kit Qty 144, Rust-Free & Lightweight, Includes Install Tools & Template, for OEM Ski-Doo 1.25/1.35 1-Ply Tracks

View on Amazon
Woody's Signature 1.325 Studs

#4 · High-Corrosion Build

4. Woody's Signature 1.325 Studs

  • Weight: 4.8 lb
  • Material: Stainless Steel
  • Thread Size: 1.325"

Best for: Corrosion-resistant 96-piece set.

Why it ranks #4: The 96-pack uses corrosion-resistant stainless steel and 60-degree carbide points; the listing says packs include studs and lock nuts.

A one-piece stud and head pairs with a 60-degree carbide point in Woody’s Signature Series, giving this 96-piece set a construction emphasis on impact resistance and penetration. Its high-corrosion-resistant stainless-steel material is specified for rigorous environments, and packs include studs with steel or aluminum lock nuts.

The one-piece stud/head construction is described as resistant to impact even across extreme variations, a useful property for hardware exposed to changing riding conditions. Its 60-degree carbide point supports penetration and durability, while the stainless-steel material and high-corrosion-resistance description address use in rigorous environments. At 96 pieces, the pack suits buyers planning a larger installation; included lock nuts are steel or aluminum, though the supplied listing does not identify which nut material is in this specific pack.

Pros
  • 96 studs per pack
  • 60-degree carbide point
  • One-piece stud and head resists impact
  • High-corrosion-resistant stainless-steel construction
Cons
  • The listing does not specify whether this pack's lock nuts are steel or aluminum.

Skip it if you need the supplied listing to identify the lock-nut material; it says steel or aluminum without specifying which for this pack.

This set suits buyers seeking 96 stainless-steel Signature Series studs with carbide points for rigorous conditions. Its one-piece construction is a useful selection factor, while the lock-nut material remains unspecified between the two listed options.

Full product details
BrandWoodys
ColorSilver
Compatible Groove Diameter1.33 inches
Fastener MaterialStainless Steel
Hardware MaterialStainless Steel
Item Dimensions9 x 7 x 2 inches
Item Weight4.8 pounds
ManufacturerWoodys
MaterialStainless Steel
ModelLEPAZA56939
Screw Head StyleFlat
Size Name6.3 inches x 1/4-20
Thread Size1.325"
Thread StyleRight Hand
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: WOODYS 96/PK WOODYS 1.325" STUDS SSP-1325-BS

View on Amazon
Icemasters Screw-In Studs

#5 · No-Drill Option

5. Icemasters Screw-In Studs

  • Material: Carbide

Best for: No-drill screw-in traction.

Why it ranks #5: Self-tapping screw-in studs need no drilling and offer a 70-degree carbide tip; the listing cautions against lugs thinner than 1/2 inch.

Self-tapping threads let the Icemasters screw into track lugs without drilling, making this 3/4-inch set a no-drill option for adding lateral traction, acceleration, and braking support. A sharp 70-degree carbide tip provides the stated biting point, while the included installation tool supports the screw-in process.

These studs mount on top of the lugs in their thicker section, where the product says they provide better bite and control. Self-tapping threads avoid drilling, and the sharp 70-degree carbide tip is intended to support traction on ice and snow. The supplied warning sets a clear installation boundary: do not place them in a lug or lug section less than 1/2 inch thick. That thickness check matters before choosing locations.

Pros
  • Self-tapping threads require no drilling
  • Sharp 70-degree carbide tip
  • Includes installation tool
  • Top-of-lug mounting targets the thicker lug section
Cons
  • Must not be installed in lug sections less than 1/2 inch thick.

Skip it if you need a pre-drilled push-through installation or have lug sections thinner than 1/2 inch; these screw-in studs require sufficient lug thickness.

Choose these for a no-drill screw-in approach when lateral grip, acceleration, and braking traction are priorities. The installation tool is included, but lug sections must meet the stated 1/2-inch minimum thickness.

Full product details
BrandINS Products carbide
Item Package Dimensions L x W x H‎5.56 x 4.69 x 0.91 inches
Manufacturer‎INS Products carbide
Material‎Carbide
Package Weight‎0.57 kg
Style‎Snowmobile Traction Studs

Listed on Amazon as: Icemasters Snowmobile Track Traction Studs – 3/4'' Screw-in Traction Studs + Installation Tool

View on Amazon
Woody's Signature 1.075 Studs

#6

6. Woody's Signature 1.075 Studs

  • Weight: 5 lb
  • Material: Stainless Steel
  • Thread Size: 1/4-20

Best for: Shorter-lug 96-stud setup.

Why it ranks #6: This 96-pack has 1.075-inch stainless-steel studs with 60-degree carbide points, offering a shorter specified size than the 1.325-inch option.

At 1.075 inches, these Woody’s Signature Series studs offer a shorter listed length than many larger stud options, a key consideration when matching hardware to a track setup. The 96-piece stainless-steel pack pairs a 60-degree carbide point with the series’ stated corrosion resistance.

The 1.075-inch size and 1.08-inch compatible groove diameter give buyers two concrete dimensions to consider when assessing their setup. Stainless-steel construction and the Signature Series’ high-corrosion-resistance description support use in rigorous environments, while the 60-degree carbide point is identified for penetration and durability. The one-piece stud/head construction is described as impact-resistant across extreme variations. The pack includes 96 studs, though the listing does not clarify the lock-nut contents for this specific item.

Pros
  • 1.075-inch stud length
  • 96-piece pack
  • Stainless-steel construction
  • 60-degree carbide point
Cons
  • The supplied product details do not identify included lock nuts for this specific pack.

Skip it if you require clearly specified lock-nut contents in the listing; the 96-piece description does not clarify them for this item.

This is a fit-focused option for buyers considering 1.075-inch studs and the stated 1.08-inch compatible groove diameter. Its stainless construction and carbide point suit rigorous use, but verify the needed pack contents from the supplied details.

Full product details
BrandWoody's
Colorblack
Compatible Groove Diameter1.08 inches
Fastener MaterialStainless Steel
Hardware MaterialStainless Steel
Included ComponentsWoody's SSP-1075-B
Item Dimensions9 x 7 x 2 inches
Item Weight5 pounds
ManufacturerWoody's
MaterialStainless Steel
ModelSSP-1075-B
Screw Head StyleBolt Head
Size Name1.075" x 1/4-20
Thread Size1/4-20
Thread StylePartially Threaded
Warranty DescriptionManufacturer Warranty

Listed on Amazon as: Woodys 18-3122-96 Signature Series Stainless Steel Studs 1.075" 96/Pk

View on Amazon
Hornet Rimless Studs

#7

7. Hornet Rimless Studs

  • Material: Alloy Steel
  • Thread Size: 1/4-inch 20

Best for: Thin-head, rimless-tip studs.

Why it ranks #7: The 96-piece set includes nuts and features a rimless tip, rotation ribs, and a thin head; its listed length is 1.95 inches.

A rimless tip with rotation ribs defines these 1.95-inch Hornet studs, combining smooth, deep penetration with a feature intended to prevent the studs from spinning. The thin head supports reduced weight and flush installation, and the package includes 96 pieces with nuts for snowmobile traction use.

The narrow barrel is also described as supporting penetration and weight reduction, complementing the thin head’s installation profile. Rotation ribs address stud spinning, while the rimless tip is specified for smooth, deep penetration. The listing says the studs install on the track lug and supplies a 1.95-inch length, giving buyers concrete design and size information for planning. Alloy-steel fastener and hardware material are specified; the supplied facts do not state a track lug-height range.

Pros
  • Rimless tip for smooth, deep penetration
  • Rotation ribs intended to prevent spinning
  • Thin head supports flush installation
  • 96 pieces with nuts
Cons
  • The supplied details do not specify a track lug-height range.

Skip it if you need a stated track lug-height range for matching studs; the supplied Hornet details give length but no lug-height range.

These Hornets suit buyers prioritizing a rimless tip, anti-rotation ribs, and a thin-head profile for track-lug installation. Consider the listed 1.95-inch length and note that a lug-height range is not supplied.

Full product details
BrandINS Products carbide
ColorSilver
Fastener MaterialAlloy Steel
Hardware MaterialAlloy Steel
ManufacturerINS Products carbide
Screw Head StyleFlat
Thread Size1/4-inch 20
Thread StyleRight Hand

Listed on Amazon as: Hornet Snowmobile Studs w/Nuts, Rimless Tip, 1.95" Length, 96 Pieces

View on Amazon
IGrip ST-24150R Studs

#8

8. IGrip ST-24150R Studs

  • Weight: 11.7 oz

Best for: Large screw-in stud quantity.

Why it ranks #8: These 24 mm screw-in studs come in a 150-piece box and feature galvanized steel, an oversized tungsten carbide tip, and installation tools.

A box of 150 screw-in studs gives the iGrip ST-24150R its defining advantage, letting buyers source a substantial quantity of lightweight, corrosion-resistant traction hardware at once. Its oversized tungsten carbide tip and galvanized-steel construction serve snowmobiles as well as motocross, enduro, and ATV applications.

The screw-in design uses a big tread for secure anchoring, while the oversized tungsten carbide tip supplies the stated carbide contact point for snow and other listed uses. Galvanized steel is described as corrosion-resistant, a practical material choice for rugged conditions. Installation and removal are supported by an included tool and instructions, so the package provides guidance and hardware for a screw-in workflow rather than requiring buyers to source those items separately.

Pros
  • 150 studs per box
  • Oversized tungsten carbide tips
  • Galvanized steel described as corrosion-resistant
  • Tool and instructions included
Cons
  • The listed applications are broad and do not specify a snowmobile track lug-height range.

Skip it if you need a specified lug-height range or a track-drilling template; Fast-Trac Top Gun II includes a drill template and cutting tool.

The ST-24150R suits buyers who need a large screw-in stud quantity for snowmobiles or the other listed off-road uses. Its included tool and instructions support installation, but the supplied details do not set a track lug-height range.

Full product details
BrandBaagialdic
Item Weight‎11.7 ounces
Item model number‎ST-24150R
Manufacturer‎IGrip
Part Number‎ST-24150R
Model‎ST-24150R
Dimensions‎6.7 x 4.5 x 0.04 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: IGrip ST-24150R Snow Studs (ST24R, 24mm, Box of 150)

View on Amazon
Stud Boy SPT Carbide Stud

#9

9. Stud Boy SPT Carbide Stud

  • Weight: 1.07 lb

Best for: Single-size carbide stud listing.

Why it ranks #9: This is a snowmobile carbide stud listed at 1 inch, but the supplied details do not give pack count, track fit, or included hardware.

A 1-inch carbide snow stud is the concrete identifier in Stud Boy’s SPT listing, giving buyers a stated stud size and carbide construction to consider for a snowmobile track setup. The supplied information names the SPT Carbide Snow Stud but provides few further installation or pack details.

The listed 1-inch size offers one specific dimension for evaluating a potential track-stud choice, while the carbide designation identifies the stated material feature. The product is presented as a snow stud under Stud Boy’s SPT name, making it relevant to buyers considering snowmobile traction hardware. Because the supplied specifications do not describe a kit, fasteners, or installation method, the listing alone does not establish a complete installation workflow; buyers should base selection on the confirmed size and product identity.

Pros
  • 1-inch stated stud size
  • Carbide construction identified in title
  • SPT product designation
  • Listed as a snow stud
Cons
  • The supplied details identify a 1-inch carbide stud but do not specify pack quantity.

Skip it if you need a stated kit quantity, installation method, or track compatibility range before selecting studs.

This listing may suit a buyer who has already identified a need for a 1-inch carbide snow stud. Its supplied details are limited, so it is not the best choice when kit contents or installation specifications are essential.

Full product details
BrandStud Boy
Item Weight‎1.07 pounds
Item model number‎2212-P1
Manufacturer‎Stud Boy
Part Number‎2212-P1
Model‎Stud Boy 2212-P1
Dimensions‎8 x 7 x 1 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: SPT Carbide Snow Stud 1"

View on Amazon
Aulpq Winter Tire Studs

#10

10. Aulpq Winter Tire Studs

  • Thread Size: 1/2"

Best for: Bulk winter tire-screw pack.

Why it ranks #10: The 250-pack is described for several tire applications, including snowmobile tracks, but provides no snowmobile-specific track fit or carbide specification.

A 250-piece quantity makes these Aulpq 1/2-inch traction screws an option for buyers planning broad coverage across winter tires, including snowmobile tracks. Their V-shaped heads have two cutting edges for digging into ice and snow, while vibration-lock teeth are specified to help the screws fit tightly.

The V-shaped cutting head is described as having two edges that dig into ice and snow, supporting traction on the slippery surfaces named in the listing. Vibration-lock teeth beneath the head are intended to hold the screws tightly in the tire, connecting the retention feature to use under vibration. The 1/2-inch size and right-hand thread provide specific selection details, and the 250-piece pack supports a larger installation. The listed applications also include motorcycles, dirt bikes, and ATVs.

Pros
  • 250 screws per pack
  • Two-edge V-shaped cutting head
  • Vibration-lock teeth beneath the head
  • Listed for snowmobile tracks and other winter tire uses
Cons
  • The listing does not provide an installation tool or track lug-thickness range.

Skip it if you need a stated lug-thickness range or included installation tool; Fast-Trac Top Gun II lists both a template and track-cutting tool.

This bulk pack suits buyers considering screw-in winter traction across snowmobile tracks and the other listed vehicle uses. Its cutting head and locking teeth are the key features; check whether its 1/2-inch size suits your installation.

Full product details
BrandAulpq
Compatible Groove Diameter0.5 inches
Fastener Size1/2" x #8
Head StyleV-shaped
Included ComponentsTire Studs
ManufacturerAulpq
ModelTire Studs
Point StyleDiamond Point
Screw Head StyleV-shaped
Screw Point StyleDiamond Point
Size Name1/2" 250 Pack (#8)
Thread Size1/2"
Thread StyleRight Hand

Listed on Amazon as: 1/2" 250 Pack (#8)- Winter Ice & Snow Tire Heavy Duty Studs Spikes for Motorcycles, Snowmobiles Tracks, Racing Dirt Bikes, and ATVs

View on Amazon

Avoiding fit and clearance failures

A stud that is too long for the lug or track layout can create a clearance problem, so verify fit before installation rather than relying on the product name alone. Woody’s Gold Digger 1325 is specifically intended for two-ply tracks with 1.220- to 1.250-inch lugs, while Fast-Trac Top Gun II is listed for 1.25- or 1.35-inch two-ply tracks. Fast-Trac Top Gun SP instead targets OEM Ski-Doo one-ply tracks in those lug-height sizes.

These are not interchangeable fit claims. Icemasters adds a separate restriction: do not install its screw-in studs in a lug or lug section less than 1/2 inch thick.

Both Fast-Trac kits state that tunnel protectors are not included, so account for that omission and check clearance requirements for your sled before fitting studs. Product listings do not provide a universal stud count or layout for every track.

How to Choose Snowmobile Track Studs

Track construction and fit

Start by matching the stud or kit to the track construction and lug height stated in its listing. Woody’s Gold Digger 1325 is intended for two-ply tracks with 1.220- to 1.250-inch lugs; Fast-Trac Top Gun II covers 1.25- or 1.35-inch two-ply tracks. Fast-Trac Top Gun SP is a different fit: OEM Ski-Doo one-ply tracks at 1.25 or 1.35 inches.

Icemasters uses a lug-thickness limit instead, warning against installation where the lug is under 1/2 inch thick. Choose the listing that matches your measured track and model; if your track details do not fit a stated range, do not assume compatibility from stud length alone.

Stud style and tip

Choose between push-through hardware and screw-in studs based on your installation approach and track suitability. Woody’s Gold Digger 1325 is a push-through stud with a patented track-trapping head, while Icemasters and IGrip are screw-in options. Their tip details also differ: Woody’s lists a 60-degree carbide insert, Icemasters a 70-degree carbide tip, and Fast-Trac kits an 80-degree mining-grade carbide tip.

IGrip specifies an oversized tungsten carbide tip. These descriptions identify construction, not comparative test results.

A buyer seeking a listed no-drill approach can consider Icemasters, which uses self-tapping threads; someone selecting a conventional matched kit can compare the Fast-Trac or Woody’s push-through options, subject to track fit.

Pack size and included hardware

Look beyond the stud count to see whether the package supplies nuts, backers, or installation aids. Woody’s Gold Digger 1325 is a 24-stud pack with 24 nuts; Woody’s Signature options and the Fast-Trac Top Gun II kit each list 96 studs, while the Top Gun SP kit lists Fast-Trac kits include backers, nuts, a template, and tools, but not tunnel protectors.

IGrip offers 150 screw-in studs and says a tool and instructions are included; Aulpq lists 250 tire studs but is not a snowmobile-specific track kit. Smaller packs suit buyers needing the stated fit in a limited quantity; a complete kit is useful when its listed components match the installation plan.

Which snowmobile track studs should I choose?

Choose the Woody’s Gold Digger 1325 if you have a two-ply track with 1.220- to 1.250-inch lugs and want a focused 24-stud push-through pack with nuts. For a broader 1.25- or 1.35-inch two-ply kit with backers and tools, choose Fast-Trac Top Gun II; for the listed OEM Ski-Doo one-ply fit at those sizes, choose Fast-Trac Top Gun SP. If avoiding drilling matters and your lug meets the stated thickness restriction, consider Icemasters Screw-In Studs.

Woody’s Signature 1.325 Studs offer a 96-pack with corrosion-resistant stainless steel, while the shorter 1.075 option has a distinct listed size. Before ordering any option, confirm track fit and check whether your installation requires tunnel protectors, which the Fast-Trac kits do not include.

Frequently Asked Questions

How many studs should I install on my snowmobile track?

There is no single count that fits every track; follow the stud pattern and quantity guidance for your track and chosen kit. The products listed come in different pack sizes, including 24, 96, 144, and 250 pieces. Confirm the required count before ordering, and do not assume a pack size is a recommended installation count.

How do I choose stud length for my track and lug height?

Match stud length to your track construction and lug height, and verify the product’s stated fit before ordering. The Gold Digger 1325 is specifically listed for two-ply tracks with 1.220- to 1.250-inch lugs. Other options have distinct listed sizes or fit descriptions, so do not treat that range as universal.

Do snowmobile studs require tunnel protectors, and how can I check clearance?

Whether protectors are needed depends on your sled and installation; check the manufacturer’s guidance and measure clearance between the installed stud tips and tunnel components. The listed Fast-Trac kits do not include tunnel protectors. Confirm the fit and clearance for your specific setup before riding rather than assuming a kit includes protection.

When should I consider screw-in studs instead of push-through studs?

Consider screw-in studs if avoiding drilling is important, but first confirm that your track meets the product’s stated thickness restriction. Icemasters are identified as screw-in studs and include an installation tool. If you choose another mounting style, verify that it matches your track construction and follow its installation instructions.

What should I check before choosing a stud kit?

Check track construction, lug height, stud fit, pack contents, and any needed installation equipment or tunnel protection. The Gold Digger 1325 pack includes 24 studs and nuts; Fast-Trac Top Gun II is described as including backers and tools, while its tunnel protectors are not included. Verify each listing’s fit for your sled.

Final Words

For a two-ply track with 1.220- to 1.250-inch lugs, the Woody’s Gold Digger 1325 is the focused choice: its 24-piece pack includes nuts. Choose Fast-Trac Top Gun II for the broader listed two-ply fit with backers and tools, or Top Gun SP for the listed OEM Ski-Doo one-ply fit. Consider Icemasters if avoiding drilling matters and your lug meets its thickness restriction.

Confirm fit and tunnel clearance before ordering.

Leave a Reply

Your email address will not be published. Required fields are marked *