Best Automatic Jack For Trailer: 10 Electric Tongue Jacks Compared

#1 · Best Overall

1. POLESTAR 7500lb Jack

• Load Capacity: 7500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer, Truck

Best for: Higher-rated A-frame lifting.

Why it ranks #1: Its 7,500-pound capacity, alloy-steel construction, and included crank and waterproof cover make it a well-equipped choice for RV and trailer use.

A 7,500-pound dynamic rating and 10,000-pound stated static lifting power distinguish this POLESTAR from its lower-capacity sibling. Electric A-frame lifting serves trailers, RVs, boats, and off-road vehicles according to the listing, while an included crank provides a manual operating alternative for this alloy-steel jack.

The dynamic and static figures describe different stated capacities, so buyers should compare the 7,500-pound dynamic load rating with their intended use rather than treating the numbers as interchangeable. Alloy-steel construction supports a heavy-duty trailer accessory, and compatibility is listed for RVs, trailers, and trucks. Its 32.28-inch dimension gives an installation-height reference. The included waterproof cover and crank add protective storage and a manual option alongside electric operation.

Skip it if you need a jack shorter than the listed 32.28-inch dimension; check another model's published dimensions before choosing.

This suits owners of heavier A-frame trailer, RV, boat, or truck setups that need the listed 7,500-pound dynamic rating. Allow for its 32.28-inch dimension and distinguish dynamic capacity from the static figure.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 7500lbs Electric Power A-Frame Tongue Jack

#2 · Best Remote Control

2. KYX 7500lb Remote Jack

• Load Capacity: lb 7500
• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Remote-operated trailer setup.

Why it ranks #2: The 7,500-pound jack includes wireless operation with a stated maximum range of 30 meters, plus a crank handle and cover.

A wireless remote with a stated 30-meter range lets you raise or lower this KYX jack from beside the vehicle or the driver's seat. That reach can help when positioning yourself matters, including the listed uneven-surface, rainy-day, and nighttime situations, while the included crank provides another operating option.

The 7,500-pound load rating and motor-driven height adjustment target RV owners who want powered lifting rather than manual hydraulic operation. Remote control can keep operation accessible without bending over or standing beside the jack, and the 30-meter maximum range gives placement flexibility. The alloy-steel construction and included cover round out the supplied details for an RV installation. A hand crank is also included, giving you a manual option alongside remote operation.

Skip it if you prefer a supplied 12V motor specification and anti-rust coating; KYX's other 7500-pound model lists both.

This suits RV owners who value remote operation while positioning a trailer, especially where reaching the jack is inconvenient. Its 7,500-pound rating and alloy-steel body are key selection details; verify that remote operation fits your preferred workflow.

Listed on Amazon as: KYX Electric Trailer Jack 7500lb with Remote, with Crank Handle & Cover

#3 · Best Midrange Capacity

3. POLESTAR 5000lb Jack

• Load Capacity: 5000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer, Truck

Best for: Higher-capacity trailer lifting.

Why it ranks #3: Its 5,000-pound capacity suits buyers who do not need the top listed rating, and it includes an alloy-steel body, crank, and waterproof cover.

A 5,000-pound dynamic rating paired with 7,500 pounds of stated static lifting power gives the POLESTAR a clear role with heavier trailer setups. Its electric A-frame operation handles raising and lowering, while the included crank offers a manual option when you need a different way to operate the jack.

The alloy-steel construction and 5,000-pound dynamic load rating suit buyers comparing electric jacks for trailers, RVs, boats, or trucks, all listed compatible vehicle types. The 7,500-pound static lifting figure is distinct from the dynamic rating, so use each in its stated context. At 32.28 inches tall, it has a defined installation profile to check against the trailer. The included waterproof cover and crank provide storage protection and an alternative operating method.

Skip it if you need a listed dynamic rating above 5,000 pounds; this model's capacity stops at that figure.

Choose it for an A-frame trailer, RV, boat, or truck setup within its 5,000-pound dynamic rating. The included crank and cover add practical options, but check the jack's 32.28-inch height against your installation space.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack

#4 · Best Included Hardware

4. Lippert 3500lb Tongue Jack

• Load Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Lower-capacity Lippert option.

Why it ranks #4: The 3,500-pound electric jack includes a clevis pin, foot pad, cotter pin, and hand crank, with listed compatibility for trailers.

Lippert's stated 3,500-pound lift capacity puts this electric tongue jack in a lower-capacity class than the 7,500-pound choices in this roundup. The supplied description also identifies quiet, efficient helical-cut gears and easy installation, giving trailer owners specific reasons to consider its operating character and setup approach.

The 3,500-pound rating provides a concrete capacity boundary for trailer selection, while the alloy-steel construction identifies the jack's material. Lippert describes helical-cut gears as quiet and efficient, a useful operating detail for buyers who prefer powered lifting without the sound of a hand crank. Included hardware comprises a clevis pin, foot pad, hairpin cotter pin, and hand crank, which gives installers several listed mounting and operation components in the package.

Skip it if you need a rating above 3,500 pounds; the Kohree HY1711-KO-US-FBA-2 lists a 4,000-pound capacity.

This is a fit for trailer owners whose requirements fall within its 3,500-pound lift capacity and who value the stated helical-gear operation. Check the trailer's needs against that limit before choosing this Lippert jack.

Listed on Amazon as: Lippert 3,500 lb Electric Trailer Tongue Jack, RV Power Jack, Black 285318

#5

5. VEVOR 4000lb Electric Jack

• Load Capacity: 4000 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Weather-exposed 4000-pound trailers.

Why it ranks #5: This 4,000-pound carbon-steel model includes a crank handle and waterproof cover, and its listed 2-year manufacturer warranty is longer than most here.

A 4,000-pound capacity and carbon-steel body with a protective coating give the VEVOR jack a defined place in everyday trailer lifting. The listing calls out RV, horse, utility, and yacht trailers, while the included waterproof sunshade cover offers a storage and exposure-related accessory for those setups.

The stated 9.84-to-33.85-inch range provides a height reference for buyers checking the jack against their trailer arrangement. Its carbon steel has a protective coating specified to withstand splashes and tough outdoor conditions, supporting use around exposed towing equipment. The 4,000-pound capacity sets the lifting boundary, and the included crank handle gives an alternative operating method. A waterproof sunshade cover is also supplied, so the package includes a named protective accessory.

Skip it if you need more than 4,000 pounds of capacity; the POLESTAR 10201091 lists a 5,000-pound dynamic rating.

Pick this for a compatible RV, horse, utility, or yacht trailer within the 4,000-pound rating, especially if the included cover and crank suit your routine. Its stated height range is a practical fit check.

Listed on Amazon as: VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84"-33.85" Electric Tongue Jack with Waterproof Cover for Lifting RV Trailer, Horse Trailer, Utility Trailer, Yacht Trailer

#6

6. Kohree 4000lb Tongue Jack

• Load Capacity: 4000 lb
• Material: Heavy-duty steel with anti-rust coating
• Compatible with Vehicle Type: Camper, RV, Trailer

Best for: Quick 4000-pound A-frame lifting.

Why it ranks #6: Its 4,000-pound dynamic and 6,000-pound static capacities are specified separately, and the package includes wiring, a cover, crank handle, and mounting bolts.

Kohree states that its jack lifts eight inches in 47 seconds, giving buyers a concrete operating-time figure for a 4,000-pound A-frame model. Its 12V DC motor powers raising and lowering, and the listing provides a static lifting figure of 6,000 pounds alongside the 4,000-pound dynamic rating.

The 4,000-pound dynamic and 6,000-pound static figures give separate capacity references for RV, camper, and trailer owners. A stated 47-second lift for eight inches helps set expectations for powered adjustment, while the 12V motor operates by button. Heavy-duty steel with an anti-rust coating provides the specified material protection. The package includes a cover, manual crank handle, and three mounting bolts, supporting installation and an alternate manual method.

Skip it if you need more than 4,000 pounds of dynamic capacity; the POLESTAR 10201091 lists a 5,000-pound dynamic rating.

This suits camper, RV, and trailer owners with needs within its 4,000-pound dynamic rating who value the stated lift time and included crank. Check the installation against its listed A-frame format.

Listed on Amazon as: Kohree Electric Trailer Jack 4000lbs with Wiring, Heavy Duty, A-Frame

#7

7. Pafessa 3500lb Tongue Jack

• Load Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer

Best for: A-frame lift-range flexibility.

Why it ranks #7: This A-frame model lists 18 inches of travel, a footpad adding 4.5 inches, and mounting hardware, but its emergency crank driver is not included.

Eighteen inches of travel plus a drop foot that adds 4.5 inches of extension gives the Pafessa jack a defined height-adjustment advantage. Its 3,500-pound rating and stated compatibility with 2.25-inch mounting holes target many A-frame trailers and RVs, while the LED light supports visibility during operation.

The 18-inch travel and adjustable six-inch-diameter footpad, which adds 4.5 inches of extension, provide two listed dimensions to consider when matching the jack to trailer height. A 3,500-pound lift and tongue-weight capacity sets the stated limit. The seven-foot power cord uses positive and negative wires for direct grounding, with terminals not included. Mounting hardware and a weather-resistant cover are supplied, and the emergency crank socket requires a separate driver handle.

Skip it if you need an emergency crank handle included; this package lists the socket but says the driver handle is not included.

Choose this for an A-frame trailer or RV with compatible mounting holes and a 3,500-pound requirement, especially when its travel and drop-foot extension suit your setup. Plan separately for wire terminals and the crank driver handle.

Listed on Amazon as: 12V Electric Tongue Jack 3500lb A-Frame Heavy Duty Trailer Jack 18” Travel Add 4.5” with The Drop Foot & LED Light for Travel Trailer Camper,Protective Cover Included

#8

8. SEALIGHT 7500lb Jack

• Load Capacity: 7500 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: RV

Best for: Nighttime 7500-pound lifting.

Why it ranks #8: Its listed 7,500-pound capacity, LED lights, and built-in circuit breaker are useful features, though the supplied details identify only a housing as included.

LED lights for nighttime lifting and a built-in circuit breaker give the SEALIGHT jack two operation-focused features alongside its 7,500-pound rating. The 12V DC motor is described as supporting quick lifting, while its carbon-steel construction and stated RV compatibility identify the intended trailer context.

The 7,500-pound load capacity and 12V DC motor point to powered lifting for an RV setup, and the listing describes the lift function as quick. LED lights improve visibility during nighttime lifting operations, a practical aid when working after dark. The built-in circuit breaker automatically cuts power for protection if the jack is improperly operated. Carbon steel is the specified material, and the product is listed as compatible with RVs.

Skip it if you need compatibility explicitly listed for a boat or yacht trailer; FZZD's Electric Trailer Jack 5500lbs lists both.

Consider this for an RV owner who wants a 7,500-pound electric jack with lighting for after-dark lifting and circuit-breaker protection. Its stated compatibility is RV-only, so keep that boundary in mind when selecting.

Listed on Amazon as: SEALIGHT Electric Trailer Jack 7500lbs, Waterproof for A-Frame&RV Trailer

#9

9. KYX 7500lb Electric Jack

• Load Capacity: 7500 LB
• Material: Carbon Steel
• Compatible with Vehicle Type: RV, Trailer

Best for: Coated-steel 7500-pound jack.

Why it ranks #9: It offers a 7,500-pound capacity and carbon-steel construction with an anti-rust coating, but the supplied component list does not specify included accessories.

A 12V DC motor rated for a 7,500-pound load gives this KYX electric jack powered lifting for A-frame trailers. Its carbon-steel body has an anti-rust coating, a material treatment the supplied description says resists harsh outdoor conditions and water splashes, making weather exposure a relevant part of its appeal.

The 12V DC motor raises or lowers an A-frame trailer, replacing manual lifting during routine setup, while the 7,500-pound load rating identifies its stated capacity. Carbon steel with an anti-rust surface coating is specified to resist outdoor conditions and water splashes, supporting use around the elements. It is listed as compatible with RVs and trailers. The product data does not list included components, so buyers should account for that when planning installation or operation.

Skip it if you want listed accessories such as a crank and waterproof cover; the POLESTAR 7500-pound model includes both.

Consider this for an RV or trailer owner seeking 12V-powered A-frame lifting at a 7,500-pound rating. Its coated carbon-steel construction suits outdoor exposure, but the unspecified included components make accessory planning important.

Listed on Amazon as: KYX Electric Trailer Jack 7500LBs,Electric Jack with Waterproof Cover

#10 · Best Side-Mount Option

10. FZZD 5500lb Side-Mount Jack

• Load Capacity: 5500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Boat Trailer, RV, Yacht Trailer

Best for: Long-travel A-frame lifting.

Why it ranks #10: Its 5,500-pound lifting rating and 22.6-inch vertical travel are notable, but its side-mount design is a less direct fit for typical A-frame jack searches.

A stated 22.6 inches of vertical travel and a 3-to-26.2-inch lifting range give this FZZD jack notable height figures for trailer setup. Its one-button 12V DC operation and 5,500-pound lifting rating target buyers seeking powered adjustment, while the built-in auto-resetting circuit breaker addresses overload or short-circuit protection.

The 5,500-pound lifting capacity and 7,500-pound support capacity are separately stated, helping buyers distinguish the jack's listed functions. Four-level height adjustment and a 3-to-26.2-inch lifting range offer defined positioning choices, while one-button operation controls the 12V DC motor. The auto-resetting circuit breaker cuts power during overload or a short circuit to protect the motor. A drop leg is included, and compatibility lists boat trailers, RVs, and yacht trailers.

Skip it if you need a mount other than the listed side-mount style; verify your trailer's mounting arrangement before selecting this jack.

This fits boat, RV, or yacht trailer owners who can use its side-mount style and want the stated long travel and motor protection. Compare its lifting and support ratings separately with your setup.

Listed on Amazon as: 5500-7500lbs Electric Trailer Jack, 22.6" Vertical Travel, 12V DC