Best Jack Stands For Trailers: Compare 10 Options

#1 · Best Overall

1. SHALL RV Stabilizer Jacks

• Weight: 8.5 lb
• Load Capacity: 7500 lb
• Material: Aluminum
• Compatible with Vehicle Type: RV, Trailer

Best for: High-capacity aluminum stack-jack buyers.

Why it ranks #1: The four-pack is compatible with RVs and trailers, adjusts from 11 to 17 inches, and lists 7,500 pounds of support per jack.

A stated 7,500-pound single-jack support capacity gives this four-pack a substantial load rating for trailer and RV stabilization. Its screw-style adjustment spans 11 to 17 inches, enabling owners to set support height across that range while addressing uneven ground after parking.

The four aluminum jacks combine a 7,500-pound single-support rating with an 11-to-17-inch adjustment range, giving owners defined capacity and height parameters for setup. Screw adjustment allows fine height changes rather than restricting the jack to fixed positions. The listing identifies the jacks for stabilization only, not lifting, so their role is parked support rather than raising a trailer. Spare nuts and pads are included, adding replacement pieces to the set.

Skip it if you need a jack that raises a trailer; this set is specifically for stabilization only.

Choose this SHALL set if your RV or trailer needs four screw-adjustable supports within an 11-to-17-inch range. Its substantial stated capacity is relevant, but it is not a lifting jack, so plan separate equipment for raising.

Listed on Amazon as: SHALL RV Stabilizer Jacks, 4-Pack Heavy Duty Aluminum Jack Stands for Travel Trailer Camper, Single Support up to 7500 Lbs, RV Leveling Screw Jack with Spare Nuts & Pads, Adjustable from 11" to 17"

#2 · Best Swing-Down Set

2. MaxxHaul 50970 Stabilizers

• Weight: 4.16 kg
• Load Capacity: 1000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer

Best for: Swing-down trailer stabilizer installers.

Why it ranks #2: These two alloy-steel jacks are designed for RVs and trailers, extend from 12 to 18 inches, and list 1,000 pounds static capacity each.

Swing-down mounting gives the MaxxHaul 50970 a different setup format: a pair of jacks that can telescope between 12 and 18 inches. Each has a 1,000-pound static capacity and 650-pound lift capacity, supporting trailer leveling with clear limits for stationary support and lifting.

The telescoping height range makes it possible to set the jacks between 12 inches collapsed and 18 inches extended, while the listed handle provides an operating accessory in the two-jack set. Each jack is rated for 1,000 pounds static load and 650 pounds lift capacity, so those separate figures help define use rather than treating them as interchangeable. Alloy-steel construction and an electrophoretic paint coating are specified for the road-exposed stabilizer application.

Skip it if you need a lift capacity above 650 pounds per jack; the stated static rating does not change that lift limit.

Choose the MaxxHaul pair when swing-down trailer stabilizers and telescoping adjustment suit your installation. The 650-pound lift capacity and 1,000-pound static rating are distinct limits, so match the intended operation to the correct figure.

Listed on Amazon as: MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks Telescoping RV Camper Accessories 1000 Lbs Capacity Each 12-18 inch | Set of 2

#3 · Tallest Range

3. Eaz-Lift Telescopic Jacks

• Weight: 2.7 kg
• Load Capacity: 6000 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer

Best for: Extended-height telescopic trailer support.

Why it ranks #3: The two steel jacks extend from 16 to 30 inches, a taller listed adjustment range suited to trailers needing more clearance beneath the frame.

A 16-to-30-inch adjustment range gives the Eaz-Lift telescopic jack more height reach than many lower-range stabilizers. Its pull pin makes height adjustment quick, while the steel construction and 6,000-pound capacity provide stated support specifications for trailer stabilization.

The pull-pin adjustment lets owners select a height within the 16-to-30-inch range without relying on a screw mechanism, which can simplify positioning during setup. A 6,000-pound capacity is paired with durable steel construction, and the powder-coated finish is specified for rust protection. The two-jack set is compatible with trailers, making this an option where the required support height falls within its longer adjustment span rather than the lower ranges of stack jacks.

Skip it if you need support below 16 inches; WELLUCK's screw jacks adjust from 11 to 17 inches.

This Eaz-Lift set suits trailer owners whose support points call for 16 to 30 inches of reach and who prefer pull-pin adjustment. Its lower boundary is 16 inches, so it is not the fit for shorter clearances.

Listed on Amazon as: Camco Eaz-Lift Telescopic RV Jack, Set of 2 – Adjustable from 16-inches to 30-inches – Constructed of Durable Steel & Powder Coated – Features a 6,000 lb. Load Capacity – 48864

#4

4. PAULINN RV Stabilizer Jacks

• Weight: 6.9 lb
• Load Capacity: 6000 lb
• Material: Aluminum
• Compatible with Vehicle Type: RV, Trailer, Camper, Cargo Trailer

Best for: Portable aluminum RV stabilizing set.

Why it ranks #4: This four-pack fits RVs, trailers, campers, and cargo trailers, with aluminum construction, 11-to-17-inch adjustment, and 6,000-pound capacity per jack.

At 6.9 pounds for the listed set, these PAULINN aluminum stabilizer jacks emphasize portable support for RVs, campers, and trailers. Their 11-to-17-inch adjustment range lets owners set contact height, while the stated 6,000-pound single-jack capacity supplies a defined support rating.

The aluminum construction pairs a 6,000-pound single-jack rating with a listed set weight of 6.9 pounds, a combination that supports carrying the jacks while still providing substantial stated capacity. Height adjusts from 11 to 17 inches, giving setup flexibility across that range. PAULINN describes the jacks as adding support from the RV frame to the ground and minimizing movement from walking, appliances, and wind, making them a stabilization option after parking.

Skip it if you need a listed warranty; this product's specifications provide no warranty coverage.

Consider this set for an RV, camper, cargo trailer, or travel trailer when portable aluminum supports and an 11-to-17-inch range suit the setup. Its stated purpose is stabilization, not a general-purpose lifting role.

Listed on Amazon as: PAULINN RV Stabilizer Jacks 4 Pack, Heavy Duty Aluminum Jack Stands for Travel Trailer Camper, Single Screw Jack Support up to 6000 Lbs, Adjustable from 11 inch to 17 inch

#5

5. WELLUCK RV Stabilizer Jacks

• Weight: 6.8 lb
• Load Capacity: 6000 lb
• Material: Strong Aluminum Alloy
• Compatible with Vehicle Type: Camper, RV, Trailer

Best for: Lightweight screw-jack RV set.

Why it ranks #5: Four aluminum screw jacks fit RVs, campers, and trailers, adjust from 11 to 17 inches, and list 6,000 pounds of support per jack.

At a listed 6.8 pounds for the set, WELLUCK's four aluminum screw jacks combine portable handling with a 6,000-pound single-support rating. Their 11-to-17-inch adjustment range gives RV and trailer owners a defined window for positioning supports after parking.

The square aluminum base and thick-walled hollow carbon-steel struts pair different materials within each jack, while the listing identifies anti-rust and anti-corrosion properties. A 6,000-pound single-support rating and four-jack set provide the stated capacity and quantity for stabilization planning. Screw adjustment from 11 to 17 inches gives a finite height range, and the 6.8-pound listed weight makes the set easier to carry than the 70-pound Mytee semi-trailer pair when portability is the deciding factor.

Skip it if you prioritize a 7,500-pound single-jack rating; SHALL's four-pack lists that higher capacity.

This WELLUCK set suits RV, camper, and trailer owners seeking light aluminum screw jacks within an 11-to-17-inch range. Choose it for portability, while noting its stated per-jack capacity is 6,000 pounds.

Listed on Amazon as: RV Stabilizers Jacks 4 Pack,Screw Jack Stands for RV Camper Travel Trailer Leveling,Aluminum,Single Support Up to 6000 Lbs, Adjustable from 11" to 17"

#6

6. Aluminum Stack Jacks

• Weight: 7.6 lb
• Load Capacity: 7500 lb
• Material: Aluminum
• Compatible with Vehicle Type: Camper, RV, Trailer, Van

Best for: Lower-clearance RV stack-jack setup.

Why it ranks #6: The four-pack is listed for campers, RVs, trailers, and vans, with 11-to-17-inch adjustment and a stated 7,500-pound capacity per jack.

An 11-to-17-inch adjustment range targets lower-clearance trailers and pop-up campers, while the four aluminum stack jacks are rated at 7,500 pounds each. The screw-style T-handle lets owners adjust support after parking and leveling to help reduce movement inside the RV.

The set is explicitly intended for use after the RV is parked and leveled, positioning these jacks as stabilizers rather than the leveling step itself. Their screw-style T-handle adjusts each jack from 11 to 17 inches, supporting height matching within that range. The listing connects stabilization with reducing side-to-side sway, floor bounce, and movement during walking, cooking, or sleeping. Four aluminum jacks and rubber pads are included for the support points.

Skip it if you need jacks to level an unparked or unlevel RV; these are specified for use after leveling.

Pick this set if your parked and leveled RV needs support against bounce and sway, especially within the 11-to-17-inch range. It is a stabilization aid, so complete parking and leveling before use.

Listed on Amazon as: RV Stabilizer Jacks 4 Pack, 7500 lbs Each, Aluminum Stack Jacks 11-17 in

#7

7. OULEME Leveling Jacks

• Weight: 7 lb
• Load Capacity: 7900 lb
• Material: Aluminum
• Compatible with Vehicle Type: RV

Best for: High-rated aluminum RV jack set.

Why it ranks #7: This four-pack of aluminum RV stack jacks lists 7,900 pounds capacity, though the supplied compatibility information names RVs rather than trailers.

A listed 7,900-pound load capacity is the key figure on this four-pack of OULEME aluminum RV stabilizer jacks. Their compact listed dimensions of 7 by 7 by 12.6 inches may help owners plan storage and placement, though the supplied specifications do not state an adjustment range.

The four-jack pack combines aluminum construction with a stated 7,900-pound capacity, giving buyers a clearly identified material and load figure for RV support planning. Its listed dimensions can help assess whether the jacks suit available storage and contact-point space. However, the product details supplied do not provide a height adjustment range or operating mechanism, so setup planning cannot be based on those specifics. Vehicle compatibility is listed as RV, and included components are not specified.

Skip it if you need a specified adjustment range or operating mechanism; neither appears in the supplied product details.

This OULEME set may suit RV owners prioritizing its listed aluminum construction and 7,900-pound capacity. The supplied information omits height range and operation details, so those unknowns limit how precisely buyers can plan setup.

Listed on Amazon as: 4PK RV Leveling & Stabilizer Jacks,7900 lbs Camper Stack Jack Stands

#8

8. Dumble Folding Stabilizer Jacks

• Load Capacity: 650 lb
• Material: Steel
• Compatible with Vehicle Type: ATV, Motorcycle

Best for: Attachable folding trailer-leg setup.

Why it ranks #8: Four attachable folding legs are intended for travel-trailer stabilization and provide up to 650 pounds of lift capacity per jack.

Four attachable flip-down legs give the Dumble set a mounted stabilizer format, with a handle and mounting screws included for installation and operation. Each stand has a stated 650-pound lift capacity and 1,000-pound breaking point, defining its support limits for trailer loading and unloading.

The folding legs mount to the trailer rather than functioning as loose stack jacks, and the included mounting screws and handle support installation and operation. Each jack is specified for 650 pounds of lift capacity, with a separate 1,000-pound breaking point; those figures should not be treated as identical operating ratings. Steel construction and the listed folding style suit owners planning a fixed attachable setup, while the stated vehicle compatibility includes ATV and motorcycle.

Skip it if you need more than 650 pounds of lift capacity per jack; MaxxHaul lists the same 650-pound lift figure per jack.

Consider Dumble when attachable folding legs suit a trailer setup and the 650-pound lift capacity per stand meets the task. Its mounting format is less suited to buyers seeking portable, unmounted stack jacks.

Listed on Amazon as: RV Stabilizer Jacks – 4pk Attachable Telescoping Travel Trailer Jack Stabilizer Stands and Jack Rod, Black,Silver

#9 · Semi-Trailer Capacity

9. Mytee Semi Trailer Stand

• Weight: 70 lb
• Load Capacity: 5000 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer

Best for: Semi-trailer high-static-capacity support.

Why it ranks #9: This steel two-pack is specifically for semi-trailers and lists 50,000 pounds static capacity, but its 44-to-51-inch range serves a specialized setup.

A 50,000-pound static capacity for the two-pack makes the Mytee Products stand set the heavy-trailer option in this roundup. Its 44-to-51-inch service range and 13.5-inch-diameter base plate suit a different scale of setup than compact RV stack jacks.

The pair's 50,000-pound static rating is distinct from its 5,000-pound lift capacity, so buyers can identify separate limits for support and lifting. A 44-to-51-inch service range places the stands at a much taller working height than short trailer stabilizers, while the 13.5-inch base plate diameter gives a concrete footprint dimension for placement planning. Steel construction and a stated 70-pound item weight are relevant when handling and positioning the equipment.

Skip it if you need compact RV supports below 44 inches; this service range starts at 44 inches.

Choose these Mytee stands for semi-trailer support where the 44-to-51-inch service range and high static rating fit the job. Their 70-pound listed weight and large base plate call for deliberate positioning and adequate space.

Listed on Amazon as: Mytee Products 2 Pack Semi Trailer Stabilizing Jack Stand 50,000 Lbs Static Capacity

#10

10. PRUTHY Jack Stands

• Load Capacity: 3 ton
• Compatible with Vehicle Type: all vehicle models

Best for: Ratchet-and-pin vehicle support buyers.

Why it ranks #10: These steel stands offer a double-locking mechanism and 3-ton capacity, but their automotive-style design is a poorer match for trailer stabilization.

A double safety mechanism combining a locking ratchet bar and metal safety pins distinguishes these PRUTHY stands for supported vehicle work. The pair is rated at 3 tons, or 6,600 pounds, and adjusts from 11.4 to 16.9 inches, offering a defined height window for trailers and SUVs.

The welded stamped-steel frame provides the structural basis for the stated 3-ton capacity, while the ratchet bar and metal safety pins add two locking elements at the selected height. That arrangement supports a more deliberate setup workflow than relying on height adjustment alone. The 11.4-to-16.9-inch range sets the practical clearance window, so buyers should match it to their vehicle and work position. The listing specifies a pair and broad vehicle compatibility.

Skip it if you need a listed set weight or included accessories; neither is specified for these stands.

These PRUTHY stands suit buyers who want ratchet-and-pin locking for supported SUV or trailer work within the stated height range. Check that 11.4 to 16.9 inches matches the intended support position before choosing them.

Listed on Amazon as: Jack Stands with Double Locking and Large Foot Base for Lifting SUVS Trailer Jack, Heavy Duty Steel Car Jack Stand, 3 Ton (6,600 lb) Capacity, Blue 1 Pair