Best Track Kit For Atv: Compare 10 Rear Track Assemblies

#1 · Best Overall

1. AYLYOTOY Rear Axle Track

Best for: Rated-load trail assemblies.

Why it ranks #1: Lists a 23.6-inch assembly, 661-pound capacity, brake disc, and three-gear tracks for mud, sand, and mountain terrain.

A stated 661-pound capacity sets the practical load reference for AYLYOTOY’s 23.6-inch rear axle track assembly, enabling buyers to evaluate it for demanding off-road use. Three internal gears form a triangular stabilizing arrangement, with the listing specifically naming mud, sand, and mountain terrain.

The 1.02-inch iron axle pairs with a cast-iron brake disc and aluminum sprocket, giving this assembly defined drive and deceleration hardware. Its three-gear triangle is intended to support stability on rough terrain, while anti-slip track texture is described as helping prevent slipping. The listing also specifies integrated molded rubber track wheels measuring 17.71 by 4.72 by 11.41 inches, useful dimensions to compare with the intended installation and available clearance.

Skip it if you need a 32-inch axle and specified 4-stud hubs; Zarko’s kit lists an 815 mm axle with that hub system.

This fits buyers considering a 23.6-inch rear track assembly for mud, sand, or mountain use who value a stated 661-pound capacity. Compare the listed track-wheel dimensions with vehicle clearance and mounting requirements before installation.

Listed on Amazon as: Rear Axle Track Assembly for Go Kart ATV UTV, 661 lbs Capacity, 23.6'' Complete Rear Axle with Brake Disc and Sprocket, Snow Sand Mud Track Kit, Golf Cart Mini Bike Snowmobile

#2 · Longest Axle

2. Zarko 32-Inch Track Assembly

Best for: Long-axle DIY drivetrain builds.

Why it ranks #2: Its 32-inch, 815mm axle, 428 chain system, 41-tooth sprocket, and triple-gear tracks offer unusually detailed build specifications.

An 815 mm (32-inch) axle paired with a 4-stud hub system distinguishes Zarko’s track kit, enabling a longer-axle DIY build with a specified chain drivetrain. The listing also pairs the axle with triple-gear sand and snow tracks for stability on unstable surfaces.

The 30 mm maximum-thickness axle and 4-stud hubs provide defined hardware for a build using compatible 6–10-inch wheels. A 428 chain and 41-tooth sprocket specify key drivetrain components, helping buyers plan around the drive system rather than a generic axle assembly. The tracks’ three internal gears form a triangular stabilization structure for mud, sand, and snow. At 47 pounds, the assembly’s listed weight also matters when handling or storing it.

Skip it if you need a 23.6-inch assembly rather than a 32-inch axle; AYLYOTOY’s listing gives a 23.6-inch complete rear axle.

This suits DIY builders planning around an 815 mm axle, 4-stud hubs, and the specified 428-chain drivetrain for sand or snow tracks. Check wheel compatibility within the stated 6–10-inch range and account for the assembly’s 47-pound weight.

Listed on Amazon as: 32" Rear Axle Track Assembly Kit with Triple-Gear Sand/Snow Tracks – Complete 428 Chain System for Go Kart, UTV, ATV & Quad | 815mm Axle, 190mm Brake & 4-Bolt Hub for All-Terrain DIY Builds

#3 · Rated Capacity

3. Fobuaggc 23.6-Inch Track Assembly

Best for: High-load mixed-terrain builds.

Why it ranks #3: Specifies a 661.38-pound capacity, 1.02-inch iron axle, treated sprocket, and ball bearings for an ATV-oriented rear assembly.

A stated 300 kg (661.38 lb) load capacity is the key differentiator of Fobuaggc’s 23.6-inch rear track assembly, enabling buyers to consider it for utility-oriented off-road builds as well as recreational vehicles. Its listing names go-karts, ATVs, UTVs, mountain vehicles, and snowmobiles among the applications.

The 1.02-inch iron axle works with a heat-treated aluminum-alloy sprocket and gray cast-iron brake disc, giving the power-transmission assembly defined braking and drive components. High-performance ball bearings are specified to reduce friction, wear, noise, and vibration, which supports smoother operation and longer service life. The 300 kg capacity is useful when load capability matters, but the listing does not establish a universal fit across every named vehicle, so axle and vehicle compatibility remain important.

Skip it if you need a clearly specified 32-inch axle; Zarko’s 32-inch rear axle kit lists an 815 mm axle and 4-stud hubs.

This suits builders considering a 23.6-inch track assembly for an ATV, UTV, go-kart, or snowmobile, especially where the stated load capacity matters. Check the vehicle’s axle and mounting requirements; the listing does not spell out every fit dimension.

Listed on Amazon as: 23.6Inch Go Kart ATV Rear Axle Track Assembly Kit, Four-Wheel Motorcycle Rear Wheel Rubber Track Kit, Rear Axle Length Compatible with All-Terrain Vehicles, Snow and Sand Motorcycles, Gasoline Engines

#4 · Terrain Stability

4. Arligaaduo Rear Axle Tracks

Best for: Three-gear terrain stability.

Why it ranks #4: Lists left and right tracks with a three-gear stabilizing structure and describes use on snow, sand, mud, and mountain roads.

Three internal gears arranged as a stabilizing triangle are the defining feature of Arligaaduo’s 23.6-inch rear axle track kit, enabling a setup intended to stay stable across mud, sand, and mountain roads. The listing identifies it as a left-and-right metal track assembly for a broad range of small vehicles.

The triangular gear arrangement is tied directly to stability on uneven terrain, while the iron axle, gray cast-iron brake disc, and heat-treated aluminum-alloy sprocket provide the named drive and braking components. Sealed bearings and high-strength alloy steel are also specified, with corrosion and impact resistance noted for demanding use. Its stated applications include ATVs, UTVs, go-karts, lawn mowers, and snowmobiles, but buyers should verify mounting details for their particular vehicle.

Skip it if you need a specifically dimensioned 815 mm axle with a 4-stud hub; Zarko’s 32-inch kit lists both measurements.

Choose this for a vehicle owner seeking a three-gear track assembly for mud, sand, or mountain-road use across the listed vehicle types. Its broad application claims do not replace checking the actual axle and mounting specifications.

Listed on Amazon as: Snow Sand Track, 23.6" Rear Axle Tracks, Wheel Assembly, Left & Right Metal Track Kit for Go Kart ATV UTV Quad Dune Buggy Lawn Mower, 4 Wheeler Drift Trike, Golf Cart Mini Bike Snowmobile Snow Blower

#5

5. Sootvp ATV Rear Track

Best for: Anti-slip rubber track traction.

Why it ranks #5: Names ATV, UTV, and snowmobile applications, with a 661.38-pound capacity, anti-slip rubber wheels, and a heat-treated sprocket.

Anti-slip rubber wheels paired with a three-gear triangular arrangement define Sootvp’s rear track assembly, enabling a traction-focused setup for mud, sand, and mountain roads. The listing names go-karts, ATVs, UTVs, off-road vehicles, and snowmobiles, and gives a 300 kg load-bearing capacity.

The 1.02-inch iron axle and heat-treated aluminum-alloy sprocket form the specified power-transmission hardware, while the brake disc is described as supporting quick deceleration and stopping. Anti-slip texture on the rubber wheels is intended to reduce slipping, and the internal gears create a stable triangle on uneven ground. The stated 300 kg capacity helps frame load planning, but buyers still need to compare the assembly’s dimensions with their vehicle.

Skip it if you need a stated 600 mm axle length and 428 37T sprocket; DNYSYSJ’s assembly lists both details.

This suits riders seeking rubber-track traction for an ATV, UTV, go-kart, or snowmobile across the listed rough terrains. Its capacity and axle diameter are stated, but the missing axle-length detail makes vehicle-specific dimension checks essential.

Listed on Amazon as: ATV Rear Track Assembly Durable Stable Off-Road Track Kit for Go-Kart ATV UTV Snowmobile, Heavy Duty Power Transmission Rear Axle Assembly with Anti-Slip Rubber Wheels

#6 · Measured Components

6. DNYSYSJ Rear Axle Track

Best for: Dimension-focused replacement builds.

Why it ranks #6: Provides a 600mm axle, 428 37T sprocket, 158mm brake disc, and 450-by-290-by-115mm track measurements.

A 600 mm rear axle, 428 37T sprocket, and 158 mm brake disc make DNYSYSJ’s assembly unusually specific about key replacement dimensions, enabling buyers to compare its drivetrain and braking parts with an existing setup. The kit is listed for snow, sand, snowmobile, and mountain-quad use.

The 720 mm assembly length and 450 by 290 by 115 mm track dimensions add useful comparison points for planning clearance and placement. Its alloy-and-metal axle is described as durable, and the listing identifies rear, left, and right placement. However, installation instructions are not included and professional installation is recommended, so buyers should plan for installation support rather than relying on an included manual.

Skip it if you need an included installation manual; AYLYOTOY’s listing specifies a 661-pound capacity and integrated molded track wheels instead.

This is for a replacement-minded buyer who can match the 600 mm axle, 428 37T sprocket, and 158 mm brake disc to the vehicle. Its detailed dimensions help planning, but installation requires separate guidance or professional support.

Listed on Amazon as: Rear Axle Track Assembly Kit for Go Kart ATV Quad, 600mm/23.6" Rear Axle Shaft Kit Go Kart Rear Wheels for Snow Sand Snowmobile

#7

7. LYNICESHOP 60cm Axle Kit

Best for: Gasoline-powered winter conversions.

Why it ranks #7: Lists a 60cm rear axle track assembly for gasoline motor use and describes a three-gear track design for varied terrain.

Gasoline-motor use is the clearest application stated for LYNICESHOP’s 60 cm rear axle track assembly, enabling buyers to consider it for snowmobile and mountain-quad conversions. Its three internal gears form a stabilizing triangle, which the listing associates with steadier driving on mud, sand, and mountain roads.

The 1.02-inch iron axle, gray cast-iron brake disc, and heat-treated aluminum-alloy sprocket identify the main drive and braking components, with wear prevention and longer service life cited for the materials and process. The triangular three-gear track structure is linked to stability across several rough surfaces. The listing gives a 60 cm axle length and rear, left, and right placement, which buyers can compare against their vehicle’s layout.

Skip it if you need an electric-motor application; Kemblawolf lists ATV and go-kart compatibility but specifies a small 1:10 or 1:12 scale.

This suits owners planning a gasoline-powered snowmobile or mountain-quad track conversion who can use the 60 cm axle and stated placement. Check the vehicle’s mounting layout and drivetrain before relying on the broad application wording.

Listed on Amazon as: 23.6'' Rear Axle Kit Assemly, 60CM ATV Snow Sand Track Kit, For Gasoline Motor Go Kart Snowmobile ATV Snow Sand

#8

8. NEBEUUO Rear Axle Track

Best for: Chain-driven snow and sand builds.

Why it ranks #8: Describes rough-surface tracks, a powered rear-wheel gear, a brake disc, and three wheels per track for snow or sand.

A power gear and attached chains transmit force directly to the rear axle, giving NEBEUUO’s track assembly a clearly described drive path for snow- and sand-oriented builds. Its rough tire surface and three wheels on each tire are also presented as features for traction and efficient force delivery.

The chain-linked power gear connects engine output to the rear axle, while the rough tire surface is specifically associated with safer driving on snow or sand. Three wheels on each tire are described as delivering force efficiently, and a metal brake disc provides a stopping component. The supplied listing does not give axle dimensions or detailed mounting measurements, so the feature set helps explain operation but leaves fitment decisions dependent on vehicle-specific information.

Skip it if you need listed axle dimensions and chain specifications; Zarko’s kit gives an 815 mm axle and a 428 chain system.

This is for a builder focused on a chain-driven rear track setup for snow or sand, with a metal brake disc and three-wheel tire arrangement. Confirm the assembly’s dimensions and mounting needs before planning installation.

Listed on Amazon as: 23.6" Go kart Rear Axle Track Assembly Kit Go Kart Buggy Quad Rear Axle Track Kit, Rear Axle Length Rear Axle Track Kit for ATV Snow Sand Snowmobile Motorcycle Gasoline

#9

9. JZSWYST Go Kart Rear Axle

Best for: Integrated rubber-track upgrades.

Why it ranks #9: Describes an integrated rear axle and rubber track-wheel assembly with anti-slip texture, but supplies fewer fitment measurements.

Integrated rubber track wheels with anti-slip texture are the clearest traction features of JZSWYST’s 23.6-inch rear axle kit, enabling added ground contact for a go-kart build. Its aluminum alloy, cast iron, iron, and rubber construction is listed for demanding riding conditions.

The complete axle-and-track assembly combines the rear axle with track wheels, so buyers can assess it as one rear-end upgrade rather than sourcing those named pieces separately. Rubber wheels provide the stated ground contact, while their anti-slip texture is intended to reduce unwanted slipping. The listing also describes the assembly as transmitting engine power to the rear wheels, but supplies no axle diameter or detailed drivetrain measurements for checking a particular vehicle’s setup.

Skip it if you need a stated 661-pound capacity and 1.02-inch axle; AYLYOTOY’s assembly lists both specifications.

This is for go-kart owners seeking an integrated rubber-track axle upgrade with anti-slip texture and added ground contact. Check axle and drivetrain dimensions against the vehicle, since the listing does not provide detailed measurements for fit planning.

Listed on Amazon as: 23.6 in Go Kart Rear Axle Kit, Rear Axle Track Assembly Kit

#10

10. Kemblawolf Snow Sand Tracks

Best for: 23T-spline compatible vehicles.

Why it ranks #10: Although it mentions ATV and UTV compatibility, its listed size is small at 1:10 or 1:12 scale, making vehicle fit especially uncertain.

23T spline compatibility is the central fit feature of Kemblawolf’s metal track assembly, enabling use on compatible big ATVs, go-karts, UTVs, buggies, quads, and snowmobiles. Its stated front, rear, left, and right placement options give buyers a broader installation position range when the vehicle and spline match.

The metal construction is presented for rugged environments, while the snow-track design targets traction and control on snow, sand, and off-road terrain. Its 23T spline specification provides a concrete compatibility point for buyers to check before installation, and the stated placement options cover front, rear, left, and right positions. The listing also gives a small 1:10 or 1:12 scale size, so this detail matters when judging whether it suits a full-size vehicle build.

Skip it if you need a full-size axle kit with stated load capacity; Fobuaggc’s assembly lists 300 kg capacity and a 23.6-inch axle.

This is a candidate for buyers whose vehicle matches the 23T spline and the stated scale, and who need track placement options across multiple positions. The 1:10 or 1:12 size is a decisive boundary for full-size applications.

Listed on Amazon as: Complete Karting Go Kart Track Kit Snow Sand Track Go Cart Tracks for UTV Buggy Quad Rear Wheel Kit ATV Electric Snowmobile Tracks 4 Wheeler Mower Golf Cart