A strong small-outboard jack plate offers a suitable horsepower rating, the setback or height adjustment your transom needs, and mounting parts that match your installation. For clamp-on motors up to 35 HP, the Camoo MJ-1-DP stands out with a 4-inch setback, cast-aluminum construction, and an included marine-grade wooden block. Several alternatives also target the same engine range, but differ in adjustment details, materials, or included hardware.
This roundup separates those small-engine choices from plates listed for motors up to 225 HP, which may not suit a small-outboard setup. Before choosing, confirm your motor’s mounting style, horsepower, shaft length, and transom dimensions against the product details and manufacturer guidance; the listings do not establish fit for every boat or motor combination.
The Camoo MJ-1-DP is the leading choice for a small outboard because it is designed for clamp-on motors up to 35 HP and provides a 4-inch setback. Its cast-aluminum plate comes with a pre-cut, pre-grooved marine-grade wooden block, useful when mounting a long-shaft motor on a shorter-shaft transom boat. Check the listed 150-pound load capacity and verify that the plate’s mounting arrangement matches your engine and transom before installation.
Our Top Picks
Best OverallDesigned for clamp-on outboards up to 35 HP, it gives a 4-inch setback and includes a pre-cut, pre-grooved marine-grade wooden mounting block.
View on Amazon
Best Wood Block KitTargets motors up to 35 HP, lists a 150-pound load capacity, and includes a cast-aluminum plate with a laminated wood mounting block.
View on Amazon
Best Long-to-Short FitIts 4-inch cast-aluminum plate is specified for clamp-on motors up to 35 HP and includes a grooved block for long-shaft motors on shorter transoms.
View on Amazon- Best Height Adjustment FQRANBO MJ-1-DP
Compare Jack Plates by Fit and Adjustment
| # | Product | Material | Weight | Dimensions | Buy |
|---|---|---|---|---|---|
| 1 | 1. Camoo MJ-1-DPBest Overall | Cast Aluminum, Marine Grade Transom Block | 5.24 kg | 16.61 x 12.79 x 4 in | View on Amazon |
| 2 | 2. Bzcovac MJ-1-DPBest Wood Block Kit | Aluminum | 10.6 lb | — | View on Amazon |
| 3 | 3. QNCKJZV MJ-1-DPBest Long-to-Short Fit | Cast Aluminum, Marine Grade Transom Block | 5.24 kg | 16.61 x 12.79 x 4 in | View on Amazon |
| 4 | 4. FQRANBO MJ-1-DPBest Height Adjustment | Aluminum, Stainless Steel | 10 lb | 13 x 4.4 x 17 in | View on Amazon |
| 5 | 5. maXpeedingrods 4-Inch PlateSaltwater-conscious steel plate | Steel | 5450 g | 13.62 x 13.5 x 4.84 in | View on Amazon |
| 6 | 6. RUIANOMG MJ-1-DPCorrosion-resistant cast aluminum | — | — | 16 x 11 x 3 in | View on Amazon |
| 7 | 7. VELCKING MJ-1-DPIncremental height tuning | Nylon | 8.12 kg | — | View on Amazon |
| 8 | 8. ElaraBerry Fixed PlateFixed-position aluminum mounting | Aluminum | — | 15.75 x 5.12 x 5.12 in | View on Amazon |
| 9 | 9. KUAFU Manual Lift PlateManual bolt-adjusted lift | Aluminum | — | 17.72 x 16.54 x 5.12 in | View on Amazon |
| 10 | 10. GELUOXI Manual PlateHigher-horsepower manual lift | Alloy Steel, Aluminum | — | — | View on Amazon |
Detailed Reviews: Best Jack Plates For Small Outboards

#1 · Best Overall
1. Camoo MJ-1-DP
- Material: Cast Aluminum, Marine Grade Transom Block
- Weight: 5.24 kg
- Dimensions: 16.61 x 12.79 x 4 in
Best for: Long-shaft transom conversion.
Why it ranks #1: Designed for clamp-on outboards up to 35 HP, it gives a 4-inch setback and includes a pre-cut, pre-grooved marine-grade wooden mounting block.
The included pre-cut, pre-grooved marine-grade wooden block is the key differentiator: it gives clamp-on outboards up to 35 HP a prepared mounting surface while this 4-inch setback plate helps fit a long-shaft motor to a shorter-shaft transom. Its cast-aluminum offset format is aimed at skiffs, aluminum boats, and inflatables.
The 4-inch setback places the engine farther from the transom, while the offset arrangement addresses the mismatch between a long-shaft motor and a short-shaft transom. Because the package includes the grooved wooden block, buyers have a matched mounting component rather than needing to source one separately. The stated application is clamp-on outboards up to 35 HP, with skiffs, aluminum boats, and inflatables specifically listed; the stated load capacity is 150 pounds.
- Fits clamp-on outboards up to 35 HP
- 4-inch setback adds distance from the transom
- Supports long-shaft motors on short-shaft transoms
- Includes pre-cut, pre-grooved marine-grade wooden block
- Manual height adjustment is not specified in the supplied product details.
Skip it if you need a stated height-adjustment range or increments; this listing does not provide them.
For owners of small skiffs, aluminum boats, or inflatables pairing a clamp-on motor up to 35 HP with a shorter transom, the included grooved block is useful; check that its 150-pound capacity suits the installation.
Full product details
| Brand | Camoo |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Skiffs, Aluminum Boats, Inflatables |
| Included Components | 1 X Cast Aluminum Jack Plate (Replace# MJ-1-DP), 1 X Marine Grade Transom Wooden Block (Replace# WOOD0002) |
| Item Dimensions | 16.61 x 12.79 x 4 inches |
| Item Weight | 5.24 kg |
| Load Capacity | 1.5E+2 pounds |
| Manufacturer | Camoo |
| Part Number | CE-MJ-1-DP |
| Manufacturer Warranty Description | 12 months warranty |
| Material | Cast Aluminum, Marine Grade Transom Block |
| Model Number | MJ-1-DP |
| Style Name | Clamp-On Style |
Listed on Amazon as: MJ-1-DP 4'' Setback Small Engine Jack Plate for Outboard Motors Up to 35HP
View on Amazon
#2 · Best Wood Block Kit
2. Bzcovac MJ-1-DP
- Material: Aluminum
- Weight: 10.6 lb
Best for: Shallow-water boat positioning.
Why it ranks #2: Targets motors up to 35 HP, lists a 150-pound load capacity, and includes a cast-aluminum plate with a laminated wood mounting block.
The included laminated wooden block pairs with a cast-aluminum 4-inch setback plate rated for outboards up to 35 HP. Bzcovac lists aluminum boats, jon boats, kayaks, and shallow-water skiffs among compatible craft, and describes changing motor height and setback to position the engine relative to the water.
The plate is described as allowing motor height and setback positioning, which lets owners alter where the engine sits relative to the water surface. The product description connects raising the motor with reduced drag and improved hydrodynamics, while its cast-aluminum plate and included laminated wood provide the listed mounting components. A 150-pound load capacity and 35 HP ceiling are relevant limits for buyers matching the plate to a boat and motor.
- 4-inch setback for outboards up to 35 HP
- Cast-aluminum plate with laminated wooden block
- Lists jon boats and shallow-water skiffs as compatible craft
- Describes adjustable motor height and setback positioning
- The supplied specifications do not give height-adjustment increments or a numeric range.
Skip it if you need a stated height range and adjustment steps; neither is specified in this listing.
For a small-boat owner seeking motor positioning on a jon boat, aluminum boat, or shallow-water skiff, the included laminated block is useful. Keep the 150-pound load capacity and 35 HP ceiling within your setup.
Full product details
| Brand | Bzcovac |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Aluminum Boat, Jon Boat, Kayak, Shallow Water Skiff, and More |
| Included Components | Cast Aluminum Jack Plate, Laminated Wood |
| Item Weight | 10.6 pounds |
| Load Capacity | 150 lbs |
| Manufacturer | Chowchow LLC |
| Part Number | BZ-MJ-1-DP |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Aluminum |
| Model Number | MJ-1-DP |
| Style Name | fixed |
Listed on Amazon as: MJ-1-DP Jack Plate 4-Inch Setback for Outboard Motors Up to 35 HP, Cast Aluminum with Wooden Mounting Block, Manual Transom Jack Plate
View on Amazon
#3 · Best Long-to-Short Fit
3. QNCKJZV MJ-1-DP
- Material: Cast Aluminum, Marine Grade Transom Block
- Weight: 5.24 kg
- Dimensions: 16.61 x 12.79 x 4 in
Best for: Small-boat shaft mismatch.
Why it ranks #3: Its 4-inch cast-aluminum plate is specified for clamp-on motors up to 35 HP and includes a grooved block for long-shaft motors on shorter transoms.
A pre-cut, pre-grooved wooden mounting block comes with this 4-inch setback plate, supporting installation of clamp-on outboards up to 35 HP. The cast-aluminum offset configuration addresses a specific pairing: a long-shaft motor mounted on a shorter-shaft transom. Skiffs, aluminum boats, and inflatables are named applications.
The offset plate and 4-inch setback add separation from the transom, while the included marine-grade block provides a prepared, grooved mounting surface for the installation. Together, those features target owners adapting a long-shaft outboard to a short-shaft transom rather than simply adding an unspecified bracket. The stated fit is clamp-on motors up to 35 HP, and the 150-pound load capacity gives buyers a concrete limit to consider when assessing their setup.
- 4-inch setback separates engine from transom
- Fits clamp-on outboards up to 35 HP
- Cast-aluminum offset design for shaft mismatch
- Includes pre-cut, pre-grooved wooden mounting block
- No height-adjustment range or adjustment increments are stated in the supplied details.
Skip it if you want a documented height range and step size; this listing supplies neither specification.
Choose it for a small-boat installation where a clamp-on motor up to 35 HP has a long shaft and the transom is shorter. The included block supports mounting, while the 150-pound capacity remains an important boundary.
Full product details
| Brand | QNCKJZV |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Skiffs, Aluminum Boats, Inflatables |
| Included Components | 1 X Cast Aluminum Jack Plate (Replace# MJ-1-DP), 1 X Marine Grade Transom Wooden Block (Replace# WOOD0002) |
| Item Dimensions | 16.61 x 12.79 x 4 inches |
| Item Weight | 5.24 kg |
| Load Capacity | 150 pounds |
| Manufacturer | QNCKJZV |
| Part Number | MJ-1-DP |
| Manufacturer Warranty Description | 1 year warranty |
| Material | Cast Aluminum, Marine Grade Transom Block |
| Model Number | MJ-1-DP |
| Style Name | Manual |
Listed on Amazon as: MJ-1-DP 4'' Setback Jack Plate for Outboard Motors Up to 35HP – Manual Lift System with Wooden Mounting Block Included – Enhance Engine Performance & Distance from Transom
View on Amazon
#4 · Best Height Adjustment
4. FQRANBO MJ-1-DP
- Material: Aluminum, Stainless Steel
- Weight: 10 lb
- Dimensions: 13 x 4.4 x 17 in
Best for: Incremental tuning with block.
Why it ranks #4: For outboards up to 35 HP, it offers 0–100 mm of height adjustment in 20 mm increments and includes a wooden mounting block.
Height adjustment from 0 to 100 mm in 20 mm increments gives this FQRANBO plate a useful tuning range for outboards up to 35 HP. It also includes a wooden mounting block and lists compatibility with small fishing boats, speedboats, aluminum boats, and inflatables, including engines from Yamaha, Mercury, and Honda.
The stated 20 mm steps across a 0–100 mm range let owners adjust engine height in measured increments when tuning ride or performance. A wooden mounting block is included, so the package combines adjustment with a mounting component rather than offering only a plate. Its listed fit covers small boats and outboards up to 35 HP, with Yamaha, Mercury, and Honda named; aluminum and stainless-steel materials are specified.
- 0–100 mm height adjustment
- Adjusts in 20 mm increments
- Wooden mounting block included
- Lists Yamaha, Mercury, and Honda among compatible brands
- The supplied details do not state a load capacity beyond the 150-pound specification.
Skip it if you need a capacity above the listed 150 pounds; this plate's stated load limit may not suit that setup.
For small-boat owners who want incremental height tuning and a supplied wooden block, this covers a stated range of outboards up to 35 HP. Keep the 150-pound capacity and your engine-brand and mounting requirements in view.
Full product details
| Brand | FQRANBO |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Outboard Motor |
| Included Components | Jack Plate 4" for Outboard Motor |
| Item Dimensions | 13 x 4.4 x 17 inches |
| Item Weight | 10 pounds |
| Load Capacity | 1.5E+2 Pounds Pounds |
| Manufacturer | FQRANBO |
| Part Number | MJ-1-DP |
| Manufacturer Warranty Description | 6 months |
| Material | Aluminum, Stainless Steel |
| Model Number | F-LPA15 19 20 |
Listed on Amazon as: MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate for Outboard Motor Up to 35 HP, Manual Adjustable Distance Between Engine and Transom, Wooden Mounting Block Included (Black)
View on Amazon
#5
5. maXpeedingrods 4-Inch Plate
- Material: Steel
- Weight: 5450 g
- Dimensions: 13.62 x 13.5 x 4.84 in
Best for: Saltwater-conscious steel plate.
Why it ranks #5: This 4-inch setback plate is listed for outboards up to 35 HP and uses powder-coated steel, with a one-year manufacturer warranty.
Powder-coated steel with stated corrosion and salt-spray resistance is the defining feature of this maXpeedingrods 4-inch setback plate. The coating is described as a barrier against rust-related strength degradation, while the plate is specified for outboards up to 35 HP and lists compatibility with multiple engine brands.
The steel construction is described as high-strength and wear-resistant, a practical consideration for a bracket exposed to boat use. Its powder coating is intended to resist corrosion and salt spray while requiring virtually no maintenance, according to the product details. The 4-inch setback gives distance between engine and transom, and the stated 35 HP ceiling helps narrow its intended small-outboard use; the supplied facts do not give a height-adjustment range.
- Steel construction described as high-strength and wear-resistant
- Powder coating provides stated salt-spray resistance
- 4-inch setback
- Specified for outboards up to 35 HP
- No height-adjustment range or step increments are provided in the supplied specifications.
Skip it if you need a documented way to change engine height; this listing does not state an adjustment range or increments.
This is a candidate for small-outboard owners who prioritize a coated steel plate and stated salt-spray resistance. Its 35 HP limit is clear, but buyers wanting specified height-tuning steps should look for a listing that provides them.
Full product details
| Brand | maXpeedingrods |
|---|---|
| Color | Black |
| Included Components | 1 x Jack Plates |
| Item Dimensions LxWxH | 13.62 x 13.5 x 4.84 inches |
| Item Package Dimensions L x W x H | 13.62 x 13.5 x 4.84 inches |
| Item Weight | 5450 g |
| Manufacturer | maXpeedingrods |
| Material | Steel |
| Model | 4" Setback Jack Plate |
| Package Weight | 5450 g |
| Warranty Description | 1 Year Manufacturer |
Listed on Amazon as: maXpeedingrods 4" Setback Jack Plate for Outboard Motors Up to 35 HP
View on AmazonWhy it ranks #6: A cast-aluminum 4-inch setback plate for clamp-mounted outboards up to 35 HP, it is described for dinghies, aluminum boats, and inflatables.
Cast-aluminum construction described as corrosion-resistant makes the RUIANOMG plate a straightforward option for clamp-mount outboards up to 35 HP. Its 4-inch setback is also stated to increase hull and strut clearance, while the application includes dinghies, aluminum boats, and inflatables and supports long-shaft motors on short-shaft sterns.
The 4-inch setback is presented as a way to increase clearance around the hull and strut, a practical point for owners dealing with a close engine-to-boat arrangement. Its cast-aluminum construction is described as able to withstand harsh ocean weather and resist corrosion. The stated application is clamp-mounted outboards up to 35 HP, including long-shaft motors on short-shaft stern boats; the supplied details list the plate but no wooden block.
- 4-inch setback
- Stated to increase hull and strut clearance
- Cast aluminum described as corrosion-resistant
- Application covers clamp-mount motors up to 35 HP
- Only the jack plate is listed as included; no mounting block is specified.
Skip it if you need a wooden mounting block in the package; this listing names only the jack plate as included.
Consider it for a dinghy, aluminum boat, or inflatable using a clamp-mount outboard up to 35 HP, especially when added hull and strut clearance matters. The listing does not specify a block or height-adjustment steps.
Full product details
| Brand | RUIANOMG |
|---|---|
| Color | Silver |
| Included Components | Jack Plate |
| Item Dimensions | 16 x 11 x 3 inches |
| Dimensions | 16 x 11 x 3 inches |
| Manufacturer | RUIANOMG |
| Part Number | RNM-H414 |
| Model Number | RNM-H414 |
Listed on Amazon as: MJ-1-DP Jack Plate 4inch Setback Replacement For Outboard Motors Up to 35HP
View on AmazonWhy it ranks #7: It is listed for outboards up to 35 HP and provides 0–100 mm of height adjustment in 20 mm increments, but its specifications list an 8-pound load capacity.
The 0–100 mm height range, adjustable in 20 mm increments, gives this VELCKING plate a concrete advantage for boaters who want repeatable engine-height changes. Its 4-inch setback is specified for small outboards up to 35 HP, and rubber pad mounting blocks plus stainless-steel screws are included for attachment.
Five-step adjustment across the stated 0–100 mm range lets a boater change engine height in measured increments rather than relying on a single fixed position. Rubber pad mounting blocks and stainless-steel screws are listed for attaching the plate to the engine and crossmember, with the pads intended to protect those mounting surfaces. The product description also identifies heavy-duty steel alloy construction for handling vibration and wave or wake impact, making this a fit for buyers prioritizing adjustable setup.
- Adjusts height from 0 to 100 mm
- Height changes are in 20 mm increments
- Rubber pad blocks and stainless-steel screws included
- Specified for outboards up to 35 HP
- The listed load capacity is only 8 pounds, a serious constraint for motor support.
Skip it if you cannot reconcile the listed 8-pound load capacity with your motor and mounting needs; the specification is a substantial limitation.
This suits buyers seeking measured height adjustments on a small boat and who can verify the unusually low listed load capacity against their installation. Its 4-inch setback and supplied mounting hardware are useful, but capacity deserves careful consideration.
Full product details
| Brand | VELCKING |
|---|---|
| Color | black |
| Compatible with Vehicle Type | boats |
| Included Components | screw |
| Item Weight | 8.12 kg |
| Load Capacity | 8 pounds |
| Manufacturer | Adjustable Outboard Engine Jack Plate for Boats |
| Part Number | mto01 |
| Manufacturer Warranty Description | 1 year |
| Material | Nylon |
| Model Number | mto01 |
| Style Name | Jack Plate |
Listed on Amazon as: MJ-1-DP Jack Plate 4'' Setback Small Engine Jack Plate Adjustable Outboard Engine Jack Plate for Boats, Up to 35HP, Manual Height Adjustment, Includes Mounting Hardware (Black)
View on Amazon
#8
8. ElaraBerry Fixed Plate
- Material: Aluminum
- Dimensions: 15.75 x 5.12 x 5.12 in
Best for: Fixed-position aluminum mounting.
Why it ranks #8: The aluminum plate is described as fixed with 4-inch setback, but the listing does not provide a small-outboard horsepower limit.
A fixed 4-inch setback is the central choice with this ElaraBerry aluminum plate: it adds separation between the outboard and transom without a stated adjustable lift mechanism. The listing identifies boat compatibility and aluminum construction, with installation features described as intuitive mounting points and clear instructions.
The fixed format provides a defined 4-inch setback, which may suit an owner who wants a set engine-to-transom position rather than a stated range of adjustments. Aluminum is the specified material, and the description says intuitive mounting points and clear instructions support installation with basic tools for DIY boaters or mechanics. The title mentions height adjustment, but the supplied specifications identify the plate as fixed and provide no adjustment range or steps.
- Fixed 4-inch setback
- Aluminum construction
- Boat compatibility listed
- Description cites mounting points and clear instructions
- Fixed design; no height-adjustment range or increments are specified.
Skip it if you need to raise or lower the engine in measured steps; this plate is listed as fixed.
Choose this for a boat owner who wants a fixed 4-inch setback and values the stated mounting guidance. It is not the right match when the installation depends on a documented adjustable height range or incremental lift.
Full product details
| Brand | ElaraBerry |
|---|---|
| Color | silver |
| Compatible with Vehicle Type | Boat |
| Included Components | 1 Set fixed jack plate |
| Item Dimensions | 15.75 x 5.12 x 5.12 inches |
| Dimensions | 15.75 x 5.12 x 5.12 inches |
| Manufacturer | ElaraBerry |
| Part Number | YOL-ElaraBerry-0633 |
| Material | Aluminum |
| Model Number | YOL-ElaraBerry-0633 |
Listed on Amazon as: Fixed Jack Plate 4 Inch Setback Durable Aluminum Boat Jack Plate for Outboard Motor Height Adjustment Improved Performance and Control Corrosion Resistant and high Load-Bearing Capacity
View on Amazon
#9
9. KUAFU Manual Lift Plate
- Material: Aluminum
- Dimensions: 17.72 x 16.54 x 5.12 in
Best for: Manual bolt-adjusted lift.
Why it ranks #9: Its 4-inch setback and manual adjustment suit long-shaft engines on short-shaft transoms, but its listed maximum is 225 HP rather than a small-engine rating.
A single steel bolt adjusts this KUAFU plate, giving buyers a stated manual method for changing its 4-inch setback. The aluminum-alloy one-piece design uses stainless-steel fasteners, and the product is described as a solution for fitting long-shaft engines to short-shaft transoms, with a 225 HP maximum rating.
Turning one steel bolt is the stated adjustment method, so the operating workflow is explicit rather than relying on an unspecified lift control. The plate provides 4 inches of setback and is described for long-shaft engines paired with short-shaft transoms. Aluminum alloy and stainless-steel fasteners are specified for corrosion resistance, while the 225 HP maximum is a broad rating to weigh against a small-outboard installation.
- Manual adjustment by turning one steel bolt
- 4-inch setback
- Addresses long-shaft engines on short-shaft transoms
- Aluminum-alloy body with stainless-steel fasteners
- The stated 225 HP maximum is substantially above the needs of small outboards rated to 35 HP.
Skip it if you need a plate specified only for motors up to 35 HP; this model lists a 225 HP maximum.
This fits buyers wanting a manually adjusted 4-inch setback for a long-shaft engine on a short-shaft transom. Its 225 HP maximum is a much broader rating than a small-outboard-specific plate, so consider that boundary.
Full product details
| Brand | KUAFU |
|---|---|
| Color | silver |
| Compatible with Vehicle Type | Boat |
| Included Components | 1 x Adjusting Jack Plate. |
| Item Dimensions | 17.72 x 16.54 x 5.12 inches |
| Load Capacity | 225 pound |
| Manufacturer | KUAFU |
| Material | Aluminum |
| Style Name | Boat Jack Plate |
Listed on Amazon as: KUAFU 4'' Set Back Jack Plate Manual Power Lift Transom Outboard Boat Motor
View on AmazonWhy it ranks #10: This manual 4-inch setback plate is listed for motors up to 225 HP, far above the 35 HP limit specified by the small-outboard-focused options.
A stated 225 HP maximum sets this GELUOXI manual plate apart from the small-outboard-focused options. Its 4-inch setback and transom-mount format support positioning an outboard, including long-shaft engines on short-shaft transoms; aluminum alloy construction and steel fasteners form its one-piece design.
The 4-inch setback adds distance between engine and transom, and the product description identifies adjustable height and setback positioning for mounting outboards. Its manual operation and transom mounting make the adjustment method and mounting location explicit, while the stated 225 HP maximum places it in a broader horsepower class than a 35 HP plate. The one-piece aluminum-alloy design uses steel fasteners, a combination specified in the product details rather than an inferred performance claim.
- 4-inch setback
- Manual operation
- One-piece aluminum-alloy design with steel fasteners
- Stated maximum rating of 225 HP
- Its 225 HP maximum is far above the needs of buyers seeking a plate rated specifically to 35 HP.
Skip it if you want a compact small-outboard rating up to 35 HP; this plate is specified up to 225 HP.
This may suit a buyer needing a manual transom plate with 4-inch setback for a broader horsepower range or long-shaft-to-short-transom setup. For a small outboard, its 225 HP maximum is a much higher rating than necessary.
Full product details
| Brand | GELUOXI |
|---|---|
| Color | Silver |
| Included Components | 1x Boat Jack Plate |
| Manufacturer | GELUOXI |
| Part Number | GELUOXI GGM-232267A-1394 |
| Material | Alloy Steel, Aluminum |
| Model Number | GELUOXI GGM-232267A-1394 |
| Operation Mode | Manual |
| Recommended Uses | Mounting and adjusting outboard motors on boat transoms; enables installation of long-shaft outboard engines on boats with short-shaft transoms (sterns); provides adjustable height and setback positioning; commonly used on jon boats and similar small-to-mid-size boats with outboard motors up to 225 |
Listed on Amazon as: Adjustable 4'' Set Back Jack Plate Manual Power Lift Transom Outboard Boat Motor Replacement for Outboard Boat Motors GELUOXI
View on AmazonCheck the shaft-and-transom mismatch before buying
A jack plate can help bridge a shaft-length and transom-height mismatch, but it does not establish that every motor will fit every boat. Camoo MJ-1-DP and QNCKJZV MJ-1-DP specifically describe mounting long-shaft motors on shorter-shaft transoms, while RUIANOMG MJ-1-DP also lists that use. Treat these as intended applications, not proof of compatibility with your particular hull.
Measure the transom and confirm the motor’s shaft length, clamp or bolt mounting arrangement, available mounting surface, and required operating height using the motor and boat manufacturers’ guidance. A 4-inch setback describes how far the plate offsets the motor; it is not a substitute for checking vertical fit or clearance.
The product listings do not provide a universal measurement procedure or full fitment chart, so resolve those details before drilling or attaching hardware. If the motor’s rated horsepower exceeds the plate’s stated limit, do not assume the setback dimension makes the combination safe.
How to Choose a Small-Outboard Jack Plate
Horsepower and mounting fit
Look first for a plate whose stated horsepower limit covers your motor and whose mounting style suits your transom. Camoo MJ-1-DP, Bzcovac MJ-1-DP, QNCKJZV MJ-1-DP, FQRANBO MJ-1-DP, maXpeedingrods 4-Inch Plate, and RUIANOMG MJ-1-DP are listed for motors up to 35 HP. By contrast, KUAFU Manual Lift Plate and GELUOXI Manual Plate list limits of 225 HP, a very different engine class.
The 35 HP choices are the more directly targeted end for a small outboard, but confirm clamp-on versus other mounting requirements and boat fit. Where the listing omits a horsepower limit, as with ElaraBerry Fixed Plate, seek confirmation rather than inferring capacity from its material or dimensions.
Setback and height adjustment
Choose the adjustment range based on whether you need only an offset or also a change in engine height. Several compact options specify a 4-inch setback; FQRANBO MJ-1-DP and VELCKING MJ-1-DP additionally list height adjustment from 0–100 mm in 20 mm increments. KUAFU Manual Lift Plate also describes adjustable height and 4 inches of setback, but it is listed for up to 225 HP.
Camoo MJ-1-DP provides the 4-inch offset, while its supplied details do not state a height-adjustment range. Buyers who need incremental height tuning should compare the two listings that specify those increments and verify their unusual 8-pound listed load capacity for VELCKING.
If your installation only needs the stated setback or shaft-to-transom adaptation, a simpler 35 HP plate may be the closer match.
Material and included mounting parts
Compare the construction and included parts because they affect what you receive and what must be verified for installation. Camoo MJ-1-DP and QNCKJZV MJ-1-DP list cast aluminum and include a marine-grade wooden block; Bzcovac MJ-1-DP also includes a wood block and lists a 150-pound capacity. maXpeedingrods 4-Inch Plate uses steel with a powder coating, while FQRANBO MJ-1-DP lists aluminum and stainless steel.
Buyers who need a block included can favor the first three listings, while a buyer comparing steel construction can consider maXpeedingrods 4-Inch Plate. Do not assume an included block or screws match your boat’s existing holes: check the mounting layout and supplied hardware details.
The listings provide different levels of installation detail, and several do not specify a complete hardware kit.
Which Jack Plate Should You Choose?
For a clamp-on outboard up to 35 HP and a long-shaft-to-shorter-transom application, choose Camoo MJ-1-DP: it pairs a 4-inch setback with a grooved wooden block. If that same engine class needs a listed 150-pound capacity, Bzcovac MJ-1-DP is an alternative with a wood block. Choose FQRANBO MJ-1-DP when incremental height adjustment matters; it specifies 0–100 mm in 20 mm steps.
For a steel plate rated to 35 HP, consider maXpeedingrods 4-Inch Plate. RUIANOMG MJ-1-DP is another cast-aluminum 35 HP option.
VELCKING MJ-1-DP lists the adjustment range but also an 8-pound load capacity, so verify suitability. ElaraBerry Fixed Plate lacks a stated engine limit; KUAFU Manual Lift Plate and GELUOXI Manual Plate are listed for up to 225 HP, making them less directly suited to small outboards.
Related Buying Guides
- Best Outboard Motor Jack Plate
- Best Outboard Hydraulic Jack Plate
- Best Hydraulic Jack Plate For Outboard Motor
- Best Trolling Plate For Outboard
- Best Jack Plate For 25 Hp Outboard
- Best Jack Plate For 90 Hp Outboard
Frequently Asked Questions
How do I measure my transom and motor shaft before choosing a jack plate?
Measure the transom height where the motor mounts, then check the motor’s shaft length using the manufacturer’s guidance. Compare the two measurements with the plate’s mounting arrangement and intended use. A long-shaft motor on a shorter-transom boat is one application identified for the Camoo plate and its grooved wooden block.
Can a jack plate compensate for a mismatch between my motor shaft and transom height?
It may help in some setups, but do not assume it resolves every mismatch. The Camoo MJ-1-DP is identified for a long-shaft motor on a shorter-shaft transom boat; confirm that your motor, transom, and plate mounting arrangement are compatible before choosing or installing a plate.
What installation checks help prevent a jack plate from loosening or damaging a transom?
Verify that the plate’s mounting pattern and hardware suit both the engine and transom, and follow the product’s installation instructions. Check any stated load capacity against your setup, and inspect the mounting surfaces and fasteners before use. If compatibility or transom condition is uncertain, get qualified guidance before installation.
Which options allow height adjustment, and how do their listed details differ?
FQRANBO specifies height adjustment from 0–100 mm in 20 mm steps. VELCKING lists an adjustment range but also an 8-pound load capacity, so verify suitability carefully. The Camoo and Bzcovac options are identified for clamp-on motors up to 35 HP, with Camoo also offering a grooved wooden block.
Are plates listed for up to 225 HP a direct fit for a small outboard?
Not necessarily. The KUAFU and GELUOXI manual plates are listed for up to 225 HP, making them less directly suited to small outboards according to the article’s verdict. Match the plate to your motor’s requirements and verify its mounting arrangement rather than choosing by the maximum horsepower figure alone.
Final Words
For a clamp-on outboard up to 35 HP on a shorter-transom boat, the Camoo MJ-1-DP is the leading choice: its 4-inch setback and grooved wooden block suit the stated long-shaft application. Confirm its 150-pound listed capacity and mounting compatibility first. Consider Bzcovac for its listed capacity, FQRANBO when stepped height adjustment matters, and other 35-HP options only after checking material and fit.
Treat higher-capacity or unspecified-limit plates cautiously.





