Best Motorcycle Carrier For RV: 10 Hitch-Mount Options Compared

Best Motorcycle Carrier For RV

A strong motorcycle carrier for an RV needs a compatible 2-inch receiver, enough rated capacity for the bike, and a way to control movement during transport. The VEVOR Motorcycle Carrier Steel is a practical starting point: it lists a 600-pound capacity, a 47-inch ramp, ratchet straps and a stabilizer. However, none of these listings confirms RV-specific approval, so a matching receiver alone does not establish that a carrier is safe for your rig.

Check the RV and hitch manufacturers’ limits, including tongue weight, before choosing. This roundup compares 10 hitch-mounted options across capacity, material and listed fit, from a 400-pound aluminum carrier to models rated for 660 pounds.

Treat their listed load ratings as product limits, not proof of RV compatibility.

The VEVOR Motorcycle Carrier Steel leads this roundup because it combines a listed 600-pound capacity with a 47-inch ramp, ratchet straps and a stabilizer. Its listing specifies a 2-inch hitch receiver, making it a useful candidate for an RV with a compatible receiver and adequate weight ratings. Confirm both the RV manufacturer’s limits and the hitch’s tongue-weight rating before buying; the product listing does not establish RV-specific approval.

Our Top Picks

VEVOR Motorcycle Carrier SteelBest Overall

VEVOR Motorcycle Carrier Steel

Its 600-pound capacity, 47-inch ramp, ratchet straps and stabilizer make it a well-equipped option for an RV with a suitable 2-inch receiver.

View on Amazon
CRAVOT Motorack M1 MaxHighest Capacity

CRAVOT Motorack M1 Max

The 660-pound rating is the highest listed, and its 2-inch fit, anti-rattle device and retractable straps suit buyers prioritizing carrying capacity and stability.

View on Amazon
Mockins Tilting Motorcycle CarrierBest Accessory Kit

Mockins Tilting Motorcycle Carrier

This 500-pound carrier includes a hitch stabilizer, hitch lock, four ratchet straps and four loop straps; its listing names cars, trucks and vans.

View on Amazon

Compare Motorcycle Carriers for RV Hitch Setups

#ProductLoad CapacityMaterialCompatible with Vehicle TypeBuy
1600 lbQ235B SteelCarView on Amazon
2660 lb—CarView on Amazon
3500 lbSteelCar, Truck, VanView on Amazon
4600 lbSteelOff-Road Motorcycle…View on Amazon
5600 lbAluminumScooterView on Amazon
6
Goplus Motorcycle Hitch Carrier6. Goplus Motorcycle Hitch CarrierHigher-capacity steel hauling
600 lbSteelvehicle with 2" receiverView on Amazon
7
ECOTRIC 600 lb Carrier7. ECOTRIC 600 lb CarrierRustproof-coated 600-pound rack
600 lbsteelDirt MotorcycleView on Amazon
8
Jeremywell 500 lb Carrier8. Jeremywell 500 lb CarrierDetachable-ramp truck carrier
500 lbAlloy SteelTruckView on Amazon
9
ECOTRIC 500 lb Carrier9. ECOTRIC 500 lb CarrierBroad receiver-class compatibility
500 lbSteelVehicle with 2" square receiver (class II…View on Amazon
10
Black Widow Aluminum 40010. Black Widow Aluminum 400Compact ramp storage for e-bikes
400 lbAluminumMotorcycleView on Amazon

Detailed Reviews: Best Motorcycle Carrier For RV

VEVOR Motorcycle Carrier Steel

#1 · Best Overall

1. VEVOR Motorcycle Carrier Steel

  • Load Capacity: 600 lb
  • Material: Q235B Steel
  • Compatible with Vehicle Type: Car

Best for: Long-ramp steel carrier.

Why it ranks #1: Its 600-pound capacity, 47-inch ramp, ratchet straps and stabilizer make it a well-equipped option for an RV with a suitable 2-inch receiver.

The VEVOR steel carrier pairs a 47-inch ramp with a 600-pound capacity, giving RV owners a longer listed loading surface for bringing a motorcycle onto the rack. Its 76-by-7-inch carrier dimensions and recommended installation height provide concrete checks for bike space and hitch setup.

The 47-inch ramp supports a roll-on loading workflow, while the 76-by-7-inch carrier deck offers a defined space for checking motorcycle fit. Q235B steel construction and the 600-pound capacity address load support for a range of motorcycle sizes. The recommended center-hole-to-ground height is 7.87 to 19.7 inches, a useful installation measurement to compare with the RV. Ratchet straps and a stabilizer are identified in the title, although the listed included-components field names only the carrier.

Pros
  • 600-pound load capacity
  • 47-inch loading ramp
  • 76-by-7-inch carrier dimensions
  • Recommended installation height is specified
Cons
  • The listed included-components field names only the carrier, not the straps or stabilizer.

Skip it if you want included straps and stabilizer confirmed in the included-components listing; the Mockins carrier specifies both along with multiple straps.

The VEVOR fits buyers who value a long ramp and a stated installation-height range for an RV hitch setup. Check that the 76-by-7-inch carrier space, recommended height, and 600-pound limit suit your bike and vehicle.

Full product details
BrandVEVOR
ColorBlack
Compatible with Vehicle TypeCar
Included Components1 x Motorcycle Hitch Carrier
Item Dimensions77 x 33.1 x 6.1 inches
Item Weight61.7 pounds
Dimensions77 x 33.1 x 6.1 inches
Load Capacity600 pounds
ManufacturerVEVOR
Part Number600 LBS Steel Motorcycle Carrier
MaterialQ235B Steel
Model NumberTD-1004-03

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Steel Motorcycle Carrier Hitch Mount with 47" Longer Ramp, Scooter Dirt Bike Trailer Hauler with Ratchet Straps and Stabilizer, for Car, Truck with 2" Hitch Receiver

View on Amazon
CRAVOT Motorack M1 Max

#2 · Highest Capacity

2. CRAVOT Motorack M1 Max

  • Load Capacity: 660 lb
  • Compatible with Vehicle Type: Car

Best for: Wide-tire dirt e-bike hauling.

Why it ranks #2: The 660-pound rating is the highest listed, and its 2-inch fit, anti-rattle device and retractable straps suit buyers prioritizing carrying capacity and stability.

The Motorack M1 Max accommodates dirt e-bikes with tires up to 6 inches wide and wheelbases up to 60 inches, giving RV owners specific fit boundaries to check. Its 660-pound capacity and 2-inch receiver compatibility extend its utility to heavier bikes that meet those dimensions.

A V-shaped front-wheel cradle accommodates a variety of tire sizes, while the stated 6-inch tire-width and 60-inch wheelbase limits help narrow compatibility for dirt e-bikes. The 660-pound capacity supports heavier loads than many listed carriers, subject to the bike’s dimensions. An anti-rattle device and built-in retractable straps address movement and securing during transport. The rack is specified for a 2-inch receiver and includes a security lock, adding a listed security component to the setup.

Pros
  • 660-pound load capacity
  • Accommodates dirt e-bikes up to 6 inches wide and 60 inches in wheelbase
  • V-shaped front-wheel cradle
  • Includes anti-rattle device, retractable straps, and security lock
Cons
  • Its 2-inch receiver requirement excludes vehicles without that receiver size.

Skip it if you have no 2-inch receiver; the Jeremywell carrier is specified for a truck, while this rack requires the stated receiver.

The M1 Max suits RV owners carrying a heavier dirt e-bike with a 2-inch receiver, up to 6-inch tires, and a wheelbase no longer than 60 inches. Check those dimensions against your bike before choosing it.

Full product details
BrandCRAVOT
ColorBlack-M1 Max
Compatible with Vehicle TypeCar
Included ComponentsSecurity Lock
Load Capacity660 pounds
ManufacturerCRAVOT
Part NumberM1 MAX
Manufacturer Warranty Description1 Year Warranty
Model NumberM1 MAX

Listed on Amazon as: Motorack M1 Max Motorbike Carrier with Ramp, 660lbs Capacity

View on Amazon
Mockins Tilting Motorcycle Carrier

#3 · Best Accessory Kit

3. Mockins Tilting Motorcycle Carrier

  • Load Capacity: 500 lb
  • Material: Steel
  • Compatible with Vehicle Type: Car, Truck, Van

Best for: Tilting ramp with tie-down kit.

Why it ranks #3: This 500-pound carrier includes a hitch stabilizer, hitch lock, four ratchet straps and four loop straps; its listing names cars, trucks and vans.

A tilting ramp is the Mockins carrier’s defining loading feature, intended to ease mounting and dismounting for motorcycles, dirt bikes, scooters, and e-bikes. The 83-inch steel frame supports up to 500 pounds and accommodates tires up to 5.5 inches wide on a 2-inch receiver.

The tilting ramp changes the loading workflow, while the 83-by-6-inch steel frame gives the bike a defined track and supports loads up to 500 pounds. Tire compatibility is specified up to 5.5 inches wide, which helps screen fat-tire e-bikes before travel. The package lists four ratchet straps, four loop straps, a hitch stabilizer, and a hitch lock, providing securing and hitch hardware. It is listed for cars, trucks, and vans with 2-inch receivers.

Pros
  • Tilting ramp for loading and dismounting
  • 500-pound capacity on an 83-inch steel frame
  • Fits tires up to 5.5 inches wide
  • Includes four ratchet straps, four loop straps, stabilizer, and hitch lock
Cons
  • The 500-pound capacity is lower than the 600-pound carriers in this roundup.

Skip it if you need a 600-pound rating; the ECOTRIC 600LBS carrier has a higher stated capacity than this 500-pound rack.

The Mockins suits RV owners who want a tilting loading approach and a detailed tie-down kit for a bike under 500 pounds. Confirm the 2-inch receiver and 5.5-inch tire-width limits against your setup.

Full product details
BrandMockins
ColorBlack
Compatible with Vehicle TypeCar, Truck, Van
Included Components1 x Hitch Mount Motorcycle Carrier with Tilting Ramp (Patent Pending) with 1 x License Plate Holder, 1 x Hitch Stabilizer and 1 x Hitch Lock, 1 x Set of Reflector Stickers, 1 x Storage Bag for Accessories, 4 x Heavy-Duty Ratchet Straps and 4 x Strong Loop Straps
Item Dimensions83 x 6 x 8 inches
Item Weight75 pounds
Dimensions83 x 6 x 8 inches
Load Capacity500 Pounds
ManufacturerMockins
Part NumberMA-HM-DBC-83-TLTS-96
Manufacturer Warranty Description5 Year Limited Warranty
MaterialSteel
Model NumberMA-HM-DBC-83-TLTS-96

Listed on Amazon as: Mockins 83" Tilting Motorcycle Hitch Carrier with Ramp w/ 500 Lbs. Capacity

View on Amazon
Black Widow Steel Carrier

#4 · Best Wheel Chock

4. Black Widow Steel Carrier

  • Load Capacity: 600 lb
  • Material: Steel
  • Compatible with Vehicle Type: Off-Road Motorcycle…

Best for: Traction-coated steel loading track.

Why it ranks #4: The 600-pound steel carrier has a wheel chock, grit-coated track and ramp, and a stated fit for Class III or IV 2-inch hitches.

Grit-coated traction surfaces cover both the track and ramp on this Black Widow carrier, supporting a more secure-feeling roll-on approach for motorcycles, dirt bikes, and scooters. Its 600-pound capacity and Class III or IV 2-inch hitch fit make it a substantial steel option for compatible RV setups.

The powder-coated 14-gauge steel construction supports up to 600 pounds, while grit coating on the track and ramp provides traction during loading and unloading. The ramp attaches to the right side, so its loading direction is fixed rather than selectable. Class III or IV 2-inch receivers define the hitch fit. A wheel chock is named in the title, adding a front-wheel positioning feature, and the carrier avoids the need for a separate bulky trailer.

Pros
  • 600-pound load capacity
  • Powder-coated 14-gauge steel construction
  • Grit-coated track and ramp surfaces
  • Includes a wheel chock and fits Class III or IV 2-inch receivers
Cons
  • The ramp attaches only to the right side of the carrier.

Skip it if you need to choose a left-side loading approach; the Black Widow aluminum carrier lets its ramp install on either side.

This Black Widow suits RV owners with a Class III or IV 2-inch receiver who want steel construction, a wheel chock, and traction-coated loading surfaces. The right-side ramp attachment sets a clear loading-direction boundary.

Full product details
BrandBlack Widow
Colorblack
Compatible with Vehicle TypeOff-Road Motorcycle, street-cruiser-motorcycles, street-sport-motorcycles
Included ComponentsMCC-600
Item Weight98 pounds
Load Capacity600 lb
ManufacturerBlack Widow
Part NumberMCC-600
Manufacturer Warranty Description1 Year
MaterialSteel
Model NumberMCC-600
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: Black Widow Steel Motorcycle Hitch Carrier, Wheel Chock, 600 lb, 2 In Hitch

View on Amazon
VEVOR Motorcycle Carrier Aluminum

#5 · Aluminum Construction

5. VEVOR Motorcycle Carrier Aluminum

  • Load Capacity: 600 lb
  • Material: Aluminum
  • Compatible with Vehicle Type: Scooter

Best for: Aluminum carrier with stowable ramp.

Why it ranks #5: Its aluminum construction and 600-pound rating stand out, while the 3.9-foot self-storing ramp helps keep the loading ramp attached when not in use.

A 3.9-foot self-storing ramp attaches to the VEVOR aluminum carrier when not in use, keeping the loading aid with the rack for an RV trip. The carrier is rated for 600 pounds and measures 74.8 by 59.06 inches, giving buyers specific capacity and footprint figures to assess.

The self-storing ramp helps keep the loading component attached to the carrier between uses, while its 3.9-foot length provides a stated measure for the roll-on approach. Aluminum construction supports the listed 600-pound capacity, and the 74.8-by-59.06-inch dimensions define a broad overall footprint to consider around the RV. The product states capacity to carry two motorcycles, but the combined load still needs to stay within the 600-pound limit. The listed compatible vehicle type is scooter.

Pros
  • Aluminum construction
  • 600-pound load capacity
  • 3.9-foot self-storing ramp
  • Listed capacity to carry two motorcycles
Cons
  • The listed compatible vehicle type is scooter, limiting the stated vehicle application.

Skip it if you need a carrier explicitly specified for trucks or vans; the Mockins carrier lists both vehicle types in its compatibility.

The VEVOR suits buyers prioritizing an aluminum carrier and ramp that stores on the rack, with a stated 600-pound ceiling. Consider its large listed footprint and scooter compatibility classification when checking an RV installation.

Full product details
BrandVEVOR
ColorSilver
Compatible with Vehicle TypeScooter
Included Components1 x Motorcycle Hitch Carrier
Item Dimensions74.8 x 59.06 x 4.72 inches
Item Weight68.3 pounds
Dimensions74.8 x 59.06 x 4.72 inches
Load Capacity600 Pounds
ManufacturerVEVOR
Part NumberAluminum Motorcycle Carrier 600 LBS
MaterialAluminum
Model NumberTD-1004-08

Listed on Amazon as: VEVOR Motorcycle Carrier, 600 LBS Aluminum Motorcycle Carrier Hitch Mount

View on Amazon
Goplus Motorcycle Hitch Carrier

#6

6. Goplus Motorcycle Hitch Carrier

  • Load Capacity: 600 lb
  • Material: Steel
  • Compatible with Vehicle Type: vehicle with 2" receiver

Best for: Higher-capacity steel hauling.

Why it ranks #6: This steel carrier is rated for 600 pounds, fits a 2-inch receiver, and includes a loading ramp and two straps for securing the motorcycle.

A 600-pound load rating is the Goplus carrier’s key advantage for RV owners hauling heavier motorcycles. Its steel construction and included straps support a firmly secured setup, while the listed tire-width limit of 7.5 inches helps determine whether a particular bike can use the rack.

The steel carrier supports up to 600 pounds, a useful capacity for motorcycles beyond lighter dirt bikes, and it is specified for vehicles with a 2-inch receiver. Two straps are included to help secure the load. Its stated tire limit of 7.5 inches gives a concrete compatibility check before a trip. The product recommends not exceeding 55 mph with a motorcycle loaded; actual speed guidance varies with motorcycle weight, so this limit affects travel planning.

Pros
  • 600-pound listed load capacity
  • Steel construction
  • Includes two straps
  • Fits vehicles with a 2-inch receiver and tires up to 7.5 inches wide
Cons
  • The product recommends a maximum 55 mph while carrying a motorcycle.

Skip it if you need to travel above the stated 55 mph recommendation with a loaded bike; the Mockins carrier does not list that speed guidance.

Consider the Goplus if your RV has a 2-inch receiver, your motorcycle and tire fit its limits, and the 600-pound capacity matters. Its 55 mph recommendation is an important boundary for route planning.

Full product details
BrandGoplus
Colorblack
Compatible with Vehicle Typevehicle with 2" receiver
Item Weight98 pounds
Load Capacity600 pounds
ManufacturerSuperbuy
Part NumberAT4338+XIN
MaterialSteel

Listed on Amazon as: Goplus Motorcycle Hitch Carrier, 600LBS Motorcycle Carrier Hitch Mount with 2 Straps, Loading Ramp, Dirt Bike Trailer, Heavy Duty Motor Cycle Rack, Fit Up to 7.5” Wide Tire

View on Amazon
ECOTRIC 600 lb Carrier

#7

7. ECOTRIC 600 lb Carrier

  • Load Capacity: 600 lb
  • Material: steel
  • Compatible with Vehicle Type: Dirt Motorcycle

Best for: Rustproof-coated 600-pound rack.

Why it ranks #7: Its 600-pound steel frame offers a higher listed capacity than the 500-pound options, though the supplied details do not specify an RV fit or stability accessories.

A rustproof coating on its steel carrier makes the ECOTRIC a relevant option for RV owners transporting a motorcycle in rainy conditions. The rack is rated for 600 pounds, allowing it to cover heavier bikes within that capacity while keeping the choice focused on a dirt-motorcycle carrier.

The steel construction and rustproof coating address durability in wet conditions, while the 600-pound capacity allows for heavier motorcycles than a lower-rated carrier can accommodate. Its listed compatible vehicle type is dirt motorcycle, so buyers should use that classification when assessing their bike. The supplied information identifies the carrier mount as an included component but gives no receiver size or ramp details, so this listing offers fewer specific installation and loading details than some alternatives.

Pros
  • 600-pound load capacity
  • Steel construction
  • Rustproof coating
  • Specified for dirt motorcycles
Cons
  • No receiver size or loading-ramp details are provided in the supplied specifications.

Skip it if you require a stated 2-inch receiver fit and ramp; the ECOTRIC AI-318 listing specifies both receiver compatibility and a ramp.

Consider this ECOTRIC if a 600-pound steel carrier with rustproof coating matches your dirt-motorcycle hauling needs. The supplied listing does not specify receiver size or ramp details, so those requirements may call for another option.

Full product details
BrandECOTRIC
ColorBLACK
Compatible with Vehicle TypeDirt Motorcycle
Included ComponentsMotorcycle Carrier Mount
Load Capacity600 pounds
ManufacturerECOTRIC
Part NumberET-008A+ET-008B
Materialsteel
Model NumberET-008A+ET-008B

Listed on Amazon as: ECOTRIC 600LBS Black Motorcycle Carrier Mount Dirt Bike Rack Hitch Hauler |

View on Amazon
Jeremywell 500 lb Carrier

#8

8. Jeremywell 500 lb Carrier

  • Load Capacity: 500 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Truck

Best for: Detachable-ramp truck carrier.

Why it ranks #8: This 500-pound alloy-steel carrier includes a 38.5-inch detachable ramp and an anti-tilt locking device, but its vehicle fit is listed as truck.

A detachable 38.5-inch loading ramp lets the Jeremywell carrier keep its loading aid separate when stored, a practical feature for RV owners managing limited cargo space. Its alloy-steel construction supports up to 500 pounds and is specified for truck use, with an anti-tilt locking device included.

The 500-pound capacity covers motorcycles, dirt bikes, dual-sport bikes, and many e-bikes, while alloy-steel construction forms the carrier’s load-bearing frame. Its 38.5-inch ramp detaches for storage, so you can put the ramp away separately when the rack is not in use. An anti-tilt locking device helps minimize hitch wobble during transport. The listed vehicle compatibility is truck, making this a more clearly targeted option than carriers described for a broader vehicle range.

Pros
  • 500-pound load capacity
  • Alloy-steel construction
  • Detachable 38.5-inch loading ramp
  • Includes an anti-tilt locking device
Cons
  • The listed compatible vehicle type is truck, limiting its stated application.

Skip it if you need a carrier explicitly listed for a car, van, or multiple vehicle types; the Mockins rack lists car, truck, and van compatibility.

Choose the Jeremywell for a truck-based RV setup hauling a bike within 500 pounds, especially when a detachable ramp suits your storage routine. Its listed vehicle type is truck, so other vehicle applications are not specified.

Full product details
BrandJeremywell
ColorBlack
Compatible with Vehicle TypeTruck
Included ComponentsAssembly Instruction
Item Dimensions40 x 11 x 8 inches
Item Weight55 pounds
Dimensions40 x 11 x 8 inches
Load Capacity500 pounds
ManufacturerJeremywell
Part NumberT-NS-MRC001
Manufacturer Warranty Description1 Year Manufacturers Warranty
MaterialAlloy Steel
Model NumberT-NS-MRC001

Listed on Amazon as: 500 lbs Heavy Duty Motorcycle Dirt Bike Scooter Carrier Hitch Rack Hauler Trailer with Loading Ramp and Anti-Tilt Locking Device T-NS-MRC001

View on Amazon
ECOTRIC 500 lb Carrier

#9

9. ECOTRIC 500 lb Carrier

  • Load Capacity: 500 lb
  • Material: Steel
  • Compatible with Vehicle Type: Vehicle with 2" square receiver (class II…

Best for: Broad receiver-class compatibility.

Why it ranks #9: It fits 2-inch square receivers across listed hitch classes II through V and loads from either side, but its 500-pound rating is below several alternatives.

Compatibility with 2-inch square Class II, III, IV, or V receivers gives the ECOTRIC AI-318 an unusually broad stated hitch-class range for RV owners. Its 500-pound steel carrier also allows loading from either side, offering flexibility in how you approach the rack.

The specified receiver fit spans four hitch classes—II through V—provided the receiver is a 2-inch square, helping buyers assess a broader range of vehicle setups. Loading from either side gives flexibility when space around an RV is constrained, and the included ramp supports rolling a bike onto the frame. High-strength steel forms the carrier, with a 500-pound capacity establishing the load boundary. Installation instructions and mounting hardware are also listed as included components.

Pros
  • Fits 2-inch square Class II, III, IV, or V receivers
  • Loading from either side
  • Includes a loading ramp
  • Steel construction with 500-pound capacity
Cons
  • The 500-pound load limit is below the ECOTRIC 600LBS carrier’s stated capacity.

Skip it if you need a 600-pound capacity; the ECOTRIC 600LBS carrier offers a higher listed load limit than this 500-pound model.

Pick the AI-318 if your RV has a compatible 2-inch square receiver and two-sided loading would help in a tight parking area. Its 500-pound limit remains the key boundary for choosing a motorcycle.

Full product details
BrandECOTRIC
ColorBlack
Compatible with Vehicle TypeVehicle with 2" square receiver (class II, III, IV, OR V trailer hitch)
Included Components1 x complete set of motorcycle trailer hitch carrier+installation instruction+mounting hardware
Item Dimensions75.91 x 32.24 x 9.06 inches
Dimensions75.91 x 32.24 x 9.06 inches
Load Capacity500 Pound
ManufacturerAinuosen
Part NumberAI-318
MaterialSteel
Model NumberAI-318

Listed on Amazon as: ECOTRIC 500LB Hitch Mount Motorcycle Carrier Transportation Racks Hitch

View on Amazon
Black Widow Aluminum 400

#10

10. Black Widow Aluminum 400

  • Load Capacity: 400 lb
  • Material: Aluminum
  • Compatible with Vehicle Type: Motorcycle

Best for: Compact ramp storage for e-bikes.

Why it ranks #10: Its aluminum construction and anti-rattle device are useful, but the 400-pound capacity is lowest here and may limit motorcycle choice for RV travel.

The aluminum carrier’s roll-on ramp attaches to either side and secures flat against the rack when stowed, making loading and storage more manageable for RV trips. Its 400-pound capacity suits motorcycles, electric bikes, and fat-tire bikes, while the 2-inch receiver fit targets Class III or IV hitches.

The ramp’s side-to-side installation gives you a choice of loading approach, and securing it flat against the carrier keeps the stored assembly compact. Aluminum construction pairs with a 400-pound load limit for hauling a range of motorcycles and e-bikes without a separate trailer. The included anti-rattle device helps minimize movement in transit, while the youth bike spacer adapter bar adds another included setup option. This carrier fits Class III or IV 2-inch receivers.

Pros
  • Aluminum construction with 400-pound capacity
  • Ramp installs on either side
  • Ramp secures flat for compact storage
  • Includes an anti-rattle device and youth bike spacer adapter bar
Cons
  • The 400-pound capacity is lower than the 600-pound options in this roundup.

Skip it if you need to carry more than 400 pounds; the Goplus 600-pound steel carrier has a higher listed capacity.

Choose this Black Widow for an RV with a Class III or IV 2-inch receiver and a bike within its 400-pound limit. Its stow-flat ramp suits compact storage, but heavier motorcycles exceed its stated capacity.

Full product details
BrandBlack Widow
Colormetallic
Compatible with Vehicle TypeMotorcycle
Included ComponentsAnti-tilt device, Loading ramp, Youth bike spacer adapter bar
Load Capacity400 lb
ManufacturerBlack Widow
Part NumberAMC-400
Manufacturer Warranty Description1 Year
MaterialAluminum
Model NumberAMC-400

Listed on Amazon as: Black Widow Aluminum Motorcycle Hitch Carrier with Ramp for eBike, 400 lb

View on Amazon

Why a 2-inch receiver alone is not enough

A 2-inch receiver match does not by itself confirm that an RV can carry a motorcycle carrier safely. The carrier and bike extend behind the hitch, and the RV’s permitted hitch load and tongue-weight limit still govern the setup. The listings vary in what they establish: Black Widow Aluminum 400 names Class III or IV 2-inch receivers, while ECOTRIC 500 lb Carrier lists 2-inch square receivers across classes II through V.

Those statements describe receiver fit, not a specific RV’s allowable load. Before buying, check the vehicle or chassis documentation and the hitch rating, and include the carrier’s own weight when determining the total load.

Also check that any RV-specific extension or hitch arrangement is permitted; these listings do not verify compatibility with extensions. If a limit or configuration cannot be confirmed, don’t treat a higher carrier capacity as a substitute for that verification.

Ramp length and bike fit can change the loading job

Ramp length and the motorcycle’s dimensions can affect whether loading is practical, even when the rated capacity is sufficient. VEVOR Motorcycle Carrier Steel lists a 47-inch ramp, while Jeremywell 500 lb Carrier lists a detachable 38.5-inch ramp; the supplied details do not give matching approach-angle or RV-clearance measurements, so those figures alone cannot predict loading ease. Check the ramp arrangement and available space behind the RV, including whether the ramp can be positioned and removed without obstruction.

Bike dimensions matter too: CRAVOT Motorack M1 Max specifies tires up to 6 inches wide and a wheelbase up to 60 inches. Mockins Tilting Motorcycle Carrier specifies tires up to 5.5 inches wide.

Compare those limits with the actual bike before choosing. A capacity rating does not guarantee that a particular tire or wheelbase will fit the track.

How to Choose an RV Motorcycle Carrier

Capacity against the complete load

Look for a listed capacity that exceeds the motorcycle’s actual weight, while separately confirming the RV hitch can support the carrier and bike together. The products range from 400 pounds for Black Widow Aluminum 400 to 660 pounds for CRAVOT Motorack M1 Max; several steel options, including VEVOR Motorcycle Carrier Steel and Goplus Motorcycle Hitch Carrier, list 600 pounds. These are carrier ratings, not RV ratings.

The 400-pound end may suit a lighter bike when all RV limits are verified. A heavier motorcycle may make a 600- or 660-pound-rated carrier a more suitable candidate, but only if the receiver, hitch and RV also allow the complete load.

Receiver fit and RV verification

Look for an explicit receiver size and confirm your RV documentation permits the hitch-mounted load. Several products specify a 2-inch receiver, including VEVOR Motorcycle Carrier Steel and Black Widow Aluminum 400; ECOTRIC 500 lb Carrier lists 2-inch square receivers across classes II, III, IV or V. The wider class listing does not prove that it suits your RV, and the supplied product details do not confirm RV-specific approval.

If your rig has a 2-inch receiver, use that as a fit check, then verify the allowable hitch load and any configuration restrictions. If the RV’s limits are unclear, resolve that before selecting a carrier based on its advertised capacity.

Material and movement-control features

Look for construction and included features that suit your handling priorities, while checking how the carrier is secured to the hitch. Aluminum options include Black Widow Aluminum 400, rated for 400 pounds, and VEVOR Motorcycle Carrier Aluminum, rated for 600 pounds. Steel alternatives include VEVOR Motorcycle Carrier Steel at 600 pounds and Mockins Tilting Motorcycle Carrier at 500 pounds.

Listed stability aids vary: CRAVOT Motorack M1 Max includes an anti-rattle device and retractable straps, while Jeremywell 500 lb Carrier has an anti-tilt locking device. Aluminum may appeal when you prefer that material; steel carriers may suit buyers seeking one of the listed higher-capacity choices.

Neither material nor an included device overrides RV load limits.

Which Motorcycle Carrier Fits My RV?

Start by confirming your RV’s hitch rating, receiver size and allowed tongue load; the product listings do not establish RV-specific approval. For a 600-pound-rated steel carrier with a 47-inch ramp, ratchet straps and a stabilizer, consider VEVOR Motorcycle Carrier Steel. If your bike is within the stated limits and you want the highest listed capacity, CRAVOT Motorack M1 Max is rated to 660 pounds and includes anti-rattle and retractable-strap features.

For a broad set of included securing accessories, Mockins Tilting Motorcycle Carrier supplies a hitch stabilizer, lock and multiple straps, with a 500-pound rating. Choose Black Widow Aluminum 400 only if its 400-pound limit suits the bike and your RV setup checks out.

If your RV’s hitch limits or configuration remain uncertain, verify them before selecting any carrier.

Frequently Asked Questions

How do I check whether my RV hitch can handle a motorcycle carrier and bike?

Check the RV manufacturer’s limits and the hitch’s tongue-weight rating, then verify the receiver size required by the carrier. Account for the carrier and motorcycle together, not just the bike. Product listings do not establish RV-specific approval, so confirm that your RV and hitch allow the intended setup before buying.

How much tongue-weight capacity should I leave for the carrier and motorcycle?

The available tongue-weight capacity must cover the combined load of the carrier and motorcycle, within the limits set by both the RV manufacturer and hitch. Check the carrier’s listed capacity as well, and do not treat that rating as proof the RV can support the load. If any rating is unclear, verify it before use.

Will a hitch-mounted motorcycle carrier block my RV lights, license plate, or access?

It may, depending on the RV, carrier, and motorcycle position. Before traveling, check whether the loaded setup obscures lights or the license plate, or interferes with access to doors, storage, or other equipment. Confirm applicable visibility requirements and resolve any obstruction before driving; the product listings do not establish how a carrier fits a specific RV.

What should I check before loading a motorcycle onto a carrier?

Confirm that the motorcycle is within the carrier’s stated capacity and that the RV hitch and receiver suit the setup. Review the carrier’s loading and securing instructions, and check that the ramp and included straps or stabilizing features are appropriate for your use. Do not assume listed accessories establish compatibility with a particular bike or RV.

How do the included straps and stabilizers affect my choice?

Compare the listed accessories with the securing features you need, while treating them as a convenience rather than proof of fit. The VEVOR steel listing includes ratchet straps and a stabilizer; the Mockins listing includes a hitch stabilizer, lock, and multiple straps. Check each carrier’s instructions and confirm the complete setup suits your RV.

Final Words

Start with your RV manufacturer’s limits, hitch tongue-weight rating, and receiver size; if any remain uncertain, verify them before choosing a carrier. VEVOR Motorcycle Carrier Steel is the roundup’s lead, with a listed 600-pound capacity, 47-inch ramp, ratchet straps, and stabilizer. Consider CRAVOT for its listed 660-pound capacity, Mockins for its securing accessories, or Black Widow Aluminum 400 only when its 400-pound limit suits your bike and setup.

Leave a Reply

Your email address will not be published. Required fields are marked *