A strong camper receiver hitch should match your RV’s mounting point and the accessory or trailer you intend to carry; CURT 13703 suits buyers who need a frame-mounted 2-inch receiver with a stated 3,500-pound gross trailer weight rating. This roundup compares ten options, from adjustable frame hitches to bolt-on bumper receivers for bike racks and cargo carriers. Those categories are not interchangeable: several bumper models explicitly limit their use to accessories rather than trailer towing.
Check the hitch’s fit dimensions and ratings alongside your camper frame or bumper limits, and follow the lowest-rated component. Some products include useful hardware, while others require a separate hitch pin.
The selections below prioritize use-case fit, then stated capacity and practical included components, so you can narrow the list to your camper’s actual mounting setup.
For a frame-mounted camper receiver, CURT 13703 is the strongest all-around choice in this selection: it adds a standard 2-by-2-inch receiver, states a 3,500-pound gross trailer weight rating and 350-pound tongue weight, and suits compatible RV, camper, and motorhome frames. Its rating is subject to the RV frame, vehicle limits, and lowest-rated towing component. If you only need a bumper-mounted accessory receiver, choose a model designed for your bumper dimensions instead; those products are not automatically suitable for towing a trailer.
Our Top Picks
Best OverallAdds a 2-inch receiver to compatible RV frames and lists 3,500-pound gross trailer weight and 350-pound tongue weight ratings.
View on Amazon
Adjustable Frame HitchCreates a 2-inch receiver for travel trailers and fifth wheels, with bolt-on Class I or welded Class II installation options.
View on Amazon
Wide Beam FitFits rear beams from 2 to 4 inches and states 3,500-pound gross trailer weight and 350-pound tongue weight capacities.
View on Amazon- Included Bumper Fit TOPTOW TTRV801
- Hardware Included Ohuhu RV Bumper Hitch
Compare receiver options by fit and intended use
| # | Product | Material | Compatible with Vehicle Type | Maximum Towing Capacity | Weight | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. CURT 13703Best Overall | Carbon Steel | ATV, Marine-Personal-Craft, Trailer | — | 98.5 lb | View on Amazon |
| 2 | 2. Stromberg Carlson CC-300Adjustable Frame Hitch | Alloy Steel | Car, Trailer | — | 46.9 lb | View on Amazon |
| 3 | 3. YZONA RV Bumper HitchWide Beam Fit | Carbon Steel | RV | 3500 lb | 5.74 kg | View on Amazon |
| 4 | 4. TOPTOW TTRV801Included Bumper Fit | Alloy Steel | 4" X 4" RV REAR BUMPER | 3500 lb | 4.45 kg | View on Amazon |
| 5 | 5. METOWARE RV Bumper HitchHigh-capacity accessory bumper hitch | Alloy Steel | Car, RV, Truck | 3500 lb | — | View on Amazon |
| 6 | 6. Fioracl Adjustable Bumper HitchAdjustable-beam bumper receiver | Alloy Steel | Trailer | 3500 lb | 4.7 kg | View on Amazon |
| 7 | 7. Ohuhu RV Bumper HitchHardware Included | Alloy Steel | Trailer | 3500 lb | — | View on Amazon |
| 8 | 8. KUAFU Travel Trailer HitchFrame-mounted trailer hitch | — | Marine-Personal-Craft, Trailer | 350 lb | 25.86 kg | View on Amazon |
| 9 | 9. Nilight RV Bumper HitchLight-duty rack carrier | Alloy Steel, Carbon Steel | Trailer | — | 3.76 kg | View on Amazon |
| 10 | 10. MaxxHaul 50173Four-inch bumper rack adapter | Alloy Steel | RV | — | — | View on Amazon |
Detailed Reviews: Best Receiver Hitch For Camper

#1 · Best Overall
1. CURT 13703
- Material: Carbon Steel
- Compatible with Vehicle Type: ATV, Marine-Personal-Craft, Trailer
- Weight: 98.5 lb
Best for: Adjustable RV frame receiver.
Why it ranks #1: Adds a 2-inch receiver to compatible RV frames and lists 3,500-pound gross trailer weight and 350-pound tongue weight ratings.
A 72-inch maximum span gives the CURT 13703 an adjustable fit range for compatible RV, camper, and motorhome frames. Its 2-inch receiver adds a standard connection for accessories, cargo carriers, trailers, or small-vehicle towing, with listed capacity limits that still defer to the frame and vehicle.
The adjustable hitch spans up to 72 inches and adds a 2-by-2-inch receiver to compatible frames, helping accommodate different RV layouts while using common hitch accessories. CURT lists 3,500 pounds gross trailer weight and 350 pounds tongue weight, but explicitly limits those figures to the lowest-rated component, RV frame capacity, and vehicle-manufacturer limits. The carbon-steel construction forms a substantial 98.5-pound assembly, so installation planning should account for its weight and frame mounting.
- Adjustable design reaches a 72-inch maximum span
- Adds a standard 2-by-2-inch receiver
- Rated for 3,500 pounds gross trailer weight
- Rated for 350 pounds tongue weight, subject to stated limits
- The 98.5-pound assembly is heavy to handle during installation.
Skip it if you want a lighter bumper-mounted accessory receiver; the Ohuhu Y60-81000-23-26 includes a hitch pin and cover.
The CURT fits buyers needing an adjustable frame hitch for an RV, camper, or motorhome and a 2-inch accessory connection. Its capacities remain bounded by the frame and the lowest-rated towing component.
Full product details
| Brand | CURT |
|---|---|
| Compatible with Vehicle Type | ATV, Marine-Personal-Craft, Trailer |
| Included Components | RV Trailer Hitch |
| Item Weight | 98.5 pounds |
| Manufacturer | Curt Manufacturing |
| Part Number | 13703 |
| Manufacturer Warranty Description | Limited Lifetime |
| Material | Carbon Steel |
| Model Number | 13703 |
Listed on Amazon as: CURT 13703 Adjustable RV Trailer Hitch, 2-Inch Receiver, 72-Inch Max
View on Amazon
#2 · Adjustable Frame Hitch
2. Stromberg Carlson CC-300
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, Trailer
- Weight: 46.9 lb
Best for: Frame-mounted trailer accessory hitch.
Why it ranks #2: Creates a 2-inch receiver for travel trailers and fifth wheels, with bolt-on Class I or welded Class II installation options.
The Stromberg Carlson CC-300 adds a 2-inch hitch to a travel trailer or fifth wheel, with a choice of bolting it on as Class I or welding it as Class II. That frame-mounted approach suits buyers seeking a receiver for bike racks and cargo carriers beyond a bumper-only fit.
Its frame attachment makes this an option for travel trailers and fifth wheels, and the 2-inch receiver provides a common connection for bike racks and cargo carriers. The choice between a Class I bolt-on installation and a Class II welded installation lets buyers select a method based on their frame-installation plan. At 46.9 pounds, it is a substantial assembly to handle during setup. The supplied information does not state a load rating, so evaluate the intended load accordingly.
- Creates a 2-inch hitch on travel trailers and fifth wheels
- Suitable for bike racks and cargo carriers
- Offers a Class I bolt-on option
- Can be welded on as Class II
- The supplied specifications do not state a load rating.
Skip it if you need a stated 350-pound tongue rating; the CURT 13703 provides one with frame-capacity limits.
Consider the CC-300 if you want a frame-mounted receiver on a travel trailer or fifth wheel and can choose between bolting and welding. The supplied details give no load rating, so that remains a key boundary.
Full product details
| Brand | Stromberg Carlson |
|---|---|
| Compatible with Vehicle Type | Car, Trailer |
| Included Components | Stromberg Carlson Product CC-300 Accessory Hitch Adjustable |
| Item Weight | 46.9 pounds |
| Manufacturer | Stromberg Carlson Products, Inc. |
| Part Number | CC-300 |
| Manufacturer Warranty Description | Please contact us if you experience any issues within 30 days of receipt. |
| Material | Alloy Steel |
| Model Number | CC-300 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |

#3 · Wide Beam Fit
3. YZONA RV Bumper Hitch
- Material: Carbon Steel
- Compatible with Vehicle Type: RV
- Maximum Towing Capacity: 3500 lb
- Weight: 5.74 kg
Best for: Wide-fit bumper receiver.
Why it ranks #3: Fits rear beams from 2 to 4 inches and states 3,500-pound gross trailer weight and 350-pound tongue weight capacities.
A stated fit range from 2-inch to 4-inch rear beams gives the YZONA hitch broader bumper-size coverage than a fixed-width receiver. Its 2-inch opening supports common camper accessories, while listed ratings of 3,500 pounds gross trailer weight and 350 pounds tongue weight define its capacity limits.
The 2-inch receiver is intended for accessories including cargo carriers, bike racks, RV tire carriers, and ball mounts, providing one connection point for varied camper equipment. Its 2-to-4-inch rear-beam fit range broadens the mounting target. YZONA specifies high-strength carbon steel and a black protective coating, supporting durability and corrosion resistance. The 3,500-pound gross trailer weight and 350-pound tongue-weight figures remain maximums, so the applicable limit of the vehicle, bumper, or other component still matters.
- Fits rear beams from 2 to 4 inches
- 2-inch receiver accommodates common hitch accessories
- 3,500-pound gross trailer weight is listed
- 350-pound tongue-weight capacity is listed
- The specified 2-to-4-inch beam range excludes beams outside those dimensions.
Skip it if you need an adjustable fit for differing beam widths and heights; the Fioracl RV Bumper Hitch Receiver describes that adjustment.
Choose the YZONA for a camper whose rear beam falls within its 2-to-4-inch range and whose accessory needs suit the listed ratings. Keep the limits of the bumper and other components in the calculation.
Full product details
| Brand | YZONA |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | Tow HITCH |
| Item Weight | 5.74 kg |
| Manufacturer | YZONA |
| Part Number | Y-XBTH-0012-FBA |
| Material | Carbon Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | RV Bumper 2" Trailer Hitch Receiver |
Listed on Amazon as: RV Bumper Hitch Receiver, 2" Tow Hitch Trailer, 3500 LBS Capacity Fits 2 inch to 4 inch Rear Beams, Towing Adapter Openning for Camper Cargo Carrier Bike Racks RV Tire Carrier Ball Mounts
View on Amazon
#4 · Included Bumper Fit
4. TOPTOW TTRV801
- Material: Alloy Steel
- Compatible with Vehicle Type: 4" X 4" RV REAR BUMPER
- Maximum Towing Capacity: 3500 lb
- Weight: 4.45 kg
Best for: Four-inch bumper accessories.
Why it ranks #4: Fits 4-by-4-inch square bumpers and lists 350-pound tongue weight, but explicitly warns it is not intended for RV-level trailer towing.
A 350-pound tongue-weight rating is the key draw of the TOPTOW TTRV801 for carrying hitch-mounted accessories on a 4-by-4-inch RV bumper. Its 2-inch receiver opening accommodates many bike racks and cargo carriers, while the listed towing warning makes clear it is not intended for RV-level trailer towing.
This receiver fits 4-by-4-inch square bumpers and can be mounted upside down, giving the installation some orientation flexibility. The 2-by-2-inch opening suits accessories with a 2-inch shank, and its stated 350-pound tongue capacity supports a heavier accessory load than a 200-pound-rated option. TOPTOW explicitly warns against RV-level trailer towing. A hitch pin or lock is not included, so plan for that separate connection hardware when setting up an accessory.
- Fits 4-by-4-inch square RV bumpers
- Can be mounted upside down
- 2-by-2-inch receiver fits many 2-inch-shank accessories
- 350-pound tongue-weight capacity is listed
- A 5/8-inch hitch pin or lock is not included.
Skip it if you need a receiver for RV-level trailer towing; the CURT 13703 lists trailer-towing capacity and frame limits.
This TOPTOW suits a camper owner adding a bike rack or cargo carrier to a 4-by-4-inch bumper. Keep its RV-level trailer-towing warning in view, and provide the separately sold hitch pin or lock.
Full product details
| Brand | TOPTOW |
|---|---|
| Compatible with Vehicle Type | 4" X 4" RV REAR BUMPER |
| Item Weight | 4.45 kg |
| Manufacturer | TOPTOW |
| Part Number | 63803 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | TTRV801 |
Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in x 4in Beams,2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on, 3500lbs
View on Amazon
#5
5. METOWARE RV Bumper Hitch
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, RV, Truck
- Maximum Towing Capacity: 3500 lb
Best for: High-capacity accessory bumper hitch.
Why it ranks #5: Fits a 4-inch square bumper and states a 350-pound tongue weight and 3,500-pound maximum towing capacity; confirm the intended use and limits.
A listed 350-pound tongue-weight capacity makes this METOWARE receiver a candidate for campers carrying heavier hitch-mounted accessories. Its 2-by-2-inch receiver is specified for common Class III/IV ball mounts, bike racks, and cargo, while the product title identifies a 4-inch square bumper fit.
The 2-by-2-inch opening accommodates many familiar hitch accessories, including bike racks and cargo, giving a camper more options for rear-mounted equipment. METOWARE lists a 350-pound tongue-weight capacity and 3,500-pound maximum towing capacity; match any load to the applicable rating and the rest of the towing setup. Its high-strength alloy steel construction supports the stated heavy-duty use. The title specifies a 4-inch square bumper, making bumper dimensions a central fit consideration before installation.
- 2-by-2-inch receiver fits many standard hitch accessories
- 350-pound tongue-weight capacity is listed
- 3,500-pound maximum towing capacity is listed
- High-strength alloy steel construction
- The supplied details do not specify an installation method.
Skip it if you want a receiver with an included hitch pin and cover; the Ohuhu Y60-81000-23-26 includes both.
Consider this METOWARE for a camper with a 4-inch square bumper and accessories that benefit from its listed 350-pound tongue capacity. Check the installation approach separately, since the supplied details do not specify it.
Full product details
| Brand | METOWARE |
|---|---|
| Compatible with Vehicle Type | Car, RV, Truck |
| Included Components | 1*rv bumper hitch receiver |
| Manufacturer | METOWARE |
| Part Number | 79961 |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 79961 |
Listed on Amazon as: RV Bumper Hitch Receiver Fits 4" Square Bumper, 3500 LBS Capacity
View on Amazon
#6
6. Fioracl Adjustable Bumper Hitch
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
- Maximum Towing Capacity: 3500 lb
- Weight: 4.7 kg
Best for: Adjustable-beam bumper receiver.
Why it ranks #6: Adjusts to different beam widths and heights and offers a 2-inch receiver; its stated 3,500-pound capacity does not establish bumper suitability.
An adjustable locking design lets this Fioracl receiver accommodate varying steel-beam widths and heights, distinguishing it from receivers specified for one bumper size. Its 2-inch opening fits many bike racks, cargo carriers, hitch steps, and tire racks, making beam adjustability the main fit advantage.
The receiver is described as adjusting to different steel-beam widths and heights, with a locking function intended to hold the beam firmly and reduce movement. That flexibility can help when a camper bumper does not match a single stated beam size. Its 2-by-2-inch tube opening accepts many common accessories with 2-inch shanks, including bike racks and cargo carriers. Alloy-steel construction and a listed 3,500-pound maximum towing capacity are specified, but the supplied information does not give a tongue-weight rating.
- Adjusts to different steel-beam widths and heights
- Locking adjustment is intended to reduce movement
- 2-by-2-inch opening fits many 2-inch-shank accessories
- 3,500-pound maximum towing capacity is listed
- The supplied details do not state a tongue-weight rating.
Skip it if you require a stated 350-pound tongue rating; the YZONA RV Bumper 2-inch Trailer Hitch Receiver lists one.
This Fioracl suits campers whose beam dimensions vary and who want an adjustable receiver for common rack accessories. Its missing tongue-weight figure is a meaningful boundary when evaluating loaded carriers.
Full product details
| Brand | Fioracl |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Item Weight | 4.7 kg |
| Manufacturer | Fioracl |
| Part Number | BXGLJQ2 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 0442b2a0-e3fb-494b-bc49-3f8ce75f491c |
Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks
View on Amazon
#7 · Hardware Included
7. Ohuhu RV Bumper Hitch
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
- Maximum Towing Capacity: 3500 lb
Best for: Pin-and-cover bumper receiver.
Why it ranks #7: Fits a 4-by-4-inch bumper and includes a hitch pin and cover, with a one-year warranty and corrosion-resistant dual coating.
A hitch pin and receiver cover come with the Ohuhu bumper hitch, so the basic connection hardware and an unused-receiver cap are included. Its 2-inch receiver is intended for accessories such as bicycle racks, tire racks, and cargo racks, with a no-welding installation approach for a 4-by-4-inch bumper.
The stated fit for 4-by-4-inch RV or travel-trailer bumpers gives buyers a defined mounting target, while the 2-inch receiver connects to compatible hitch accessories. Ohuhu says installation does not require welding, which keeps the setup focused on attaching the receiver to the bumper. The included pin addresses wobble concerns, and the cap covers the opening when unused. E-coat and black powder coating are specified to help resist rust and corrosion during storage and use.
- Fits 4-by-4-inch RV or travel-trailer bumpers
- Installation does not require welding
- Includes a hitch pin and receiver cover
- E-coat and powder coating help resist corrosion
- The supplied facts do not state a tongue-weight capacity.
Skip it if you need a stated 350-pound tongue rating; the METOWARE 79961 lists that accessory capacity.
The Ohuhu suits campers wanting a no-welding bumper receiver with a pin and cap included for accessory use. Its bumper fit and the absence of a stated tongue-weight figure are important decision boundaries.
Full product details
| Brand | Ohuhu |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Bumper Hitch Receiver, Hitch Cover, Hitch Pin |
| Manufacturer | Ohuhu |
| Part Number | Y60-81000-26 |
| Manufacturer Warranty Description | 1 Year |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | Y60-81000-23-26 |
Listed on Amazon as: Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin and Hitch Cover
View on Amazon
#8
8. KUAFU Travel Trailer Hitch
- Compatible with Vehicle Type: Marine-Personal-Craft, Trailer
- Maximum Towing Capacity: 350 lb
- Weight: 25.86 kg
Best for: Frame-mounted trailer hitch.
Why it ranks #8: Offers a 2-inch receiver for travel trailers and fifth wheels, but its listing gives different tongue-weight figures by installation class.
The KUAFU offers Class I bolt-on and Class II welded frame-installation options, making its 2-inch hitch relevant to travel trailers and fifth wheels. The supplied description also distinguishes tongue-weight figures by installation class, helping buyers connect their mounting approach with the stated load limit.
KUAFU describes the receiver for travel trailers and fifth wheels, with uses including boat trailers, popup campers, trailers, and bikes. A Class I installation bolts to the frame and is listed at a 200-pound maximum tongue weight; a Class II installation is welded and lists 300 to 350 pounds. That distinction makes the installation method central to choosing a suitable load. Steel construction and a powder-coat finish are also specified for this frame-mounted hitch.
- 2-inch hitch for travel trailers and fifth wheels
- Class I bolt-on frame installation is specified
- Class II welded installation is specified
- Powder-coated steel construction
- The listed tongue-weight limit depends on the frame-installation class.
Skip it if you need an adjustable hitch with a stated 3,500-pound gross trailer rating; the CURT 13703 lists that capacity.
The KUAFU suits buyers planning a frame-mounted receiver for a travel trailer or fifth wheel and able to choose bolt-on or welded installation. Its class-specific tongue limits are essential to load planning.
Full product details
| Brand | KUAFU |
|---|---|
| Compatible with Vehicle Type | Marine-Personal-Craft, Trailer |
| Item Weight | 25.86 kg |
| Manufacturer | Scarman LLC |
| Part Number | GO-1241 |
| Maximum Towing Capacity | 350 pounds |
| Model Number | GO-1241 |
Listed on Amazon as: KUAFU 2" Towing Hitch Receiver for Travel Trailers and Fifth Wheels
View on Amazon
#9
9. Nilight RV Bumper Hitch
- Material: Alloy Steel, Carbon Steel
- Compatible with Vehicle Type: Trailer
- Weight: 3.76 kg
Best for: Light-duty rack carrier.
Why it ranks #9: Fits beams from 4 to 4.5 inches and has a 2-inch receiver, but its stated 200-pound tongue weight limits accessory load.
A 2-inch receiver opening gives this Nilight bumper hitch a standard connection for many camper bike racks and cargo carriers. Its stated 200-pound tongue-weight capacity makes it a focused option for carrying approved hitch-mounted accessories, rather than choosing a receiver for heavier loads or broader towing duties.
The receiver is specified for 4- to 4.5-inch beams, so it targets a narrower bumper range than models for standard 4-by-4-inch bumpers. Its 2-by-2-inch opening accepts accessories with a 2-inch shank, which keeps rack and carrier compatibility straightforward. Nilight lists 200 pounds of tongue weight and 2,000 pounds gross trailer weight, with capacity limited by the lowest-rated towing component. Match the load to those limits and the bumper fit before installing.
- 2-by-2-inch receiver accepts many 2-inch-shank accessories
- Specified for 4- to 4.5-inch beams
- 200-pound tongue-weight rating is stated
- Steel construction uses alloy and carbon steel
- The 200-pound tongue-weight rating limits heavier mounted loads.
Skip it if you need a 350-pound tongue-weight rating; the TOPTOW TTRV801 lists that capacity for accessory use.
Choose this Nilight for a camper owner carrying a compatible bike rack or cargo carrier on a 4- to 4.5-inch beam. Its 200-pound tongue limit is the key boundary when weighing heavier accessories.
Full product details
| Brand | Nilight |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Bumper Hitch Receiver |
| Item Weight | 3.76 kg |
| Manufacturer | Nilight |
| Part Number | 92116B |
| Manufacturer Warranty Description | 2 Years Warranty |
| Material | Alloy Steel, Carbon Steel |
| Model Number | 92116B |
Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers
View on Amazon
#10
10. MaxxHaul 50173
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Four-inch bumper rack adapter.
Why it ranks #10: Fits a 4-inch square RV bumper and lists 200-pound tongue weight, but the listing says it is not intended for RV-level trailer towing.
This MaxxHaul adapter turns a 4-inch square RV bumper into a 2-by-2-inch receiver, opening up a standard connection for rack-style accessories. Its 200-pound tongue-weight limit suits buyers focused on compatible bike racks, tire carriers, or hitch steps, not RV-level trailer towing.
The universal receiver accepts accessories with a 2-inch shank, including bike racks, RV tire carriers, and hitch steps, giving a 4-inch square bumper more accessory options. Its all-steel construction is described as durable and rust resistant. MaxxHaul lists a 200-pound tongue-weight capacity, while its description cautions against RV-level trailer towing and calls for care with cargo carriers. Treat this as an accessory adapter, and keep the intended load within its stated limits.
- Fits 4-inch square RV bumpers
- Provides a 2-by-2-inch receiver
- Accepts 2-inch-shank racks and accessories
- All-steel construction is described as rust resistant
- It is not intended for RV-level trailer towing.
Skip it if you want a receiver with a 350-pound tongue rating; the TOPTOW TTRV801 lists that rating for accessories.
Choose this MaxxHaul for a 4-inch square bumper and compatible hitch-mounted accessories such as a bike rack or tire carrier. Its 200-pound tongue limit and towing caution define the use boundary.
Full product details
| Brand | MAXXHAUL |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | 50173 |
| Manufacturer | MaxxHaul |
| Part Number | 50173 |
| Manufacturer Warranty Description | 90 days |
| Material | Alloy Steel |
| Model Number | 50173 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers
View on AmazonWhy a bumper receiver rating may not mean trailer-towing approval
A bumper receiver’s listed capacity does not by itself show that the camper bumper can safely tow a trailer. TOPTOW TTRV801 explicitly says it is not intended for RV-level trailer towing, and MaxxHaul 50173 also warns against that use. Nilight gives a 2,000-pound gross trailer weight and 200-pound tongue weight figure, but its description focuses on carrying an RV-approved hitch-mount rack.
Treat product ratings as limits for the specified application, not as proof that your RV structure is rated for the same load. A receiver, bumper, frame, and accessory can all have different limits; the lowest-rated component governs.
If your goal is to tow a trailer, compare frame-mounted options such as CURT 13703 and verify your RV manufacturer’s limits. For a bike rack or cargo carrier, verify the bumper and accessory load limits instead.
Measure the mounting point before choosing a receiver
The receiver opening is not the only dimension that determines whether a hitch will fit your camper. Several bumper models here require a 4-by-4-inch square bumper, including TOPTOW TTRV801 and Ohuhu RV Bumper Hitch; Nilight instead lists beams from 4 to 4.5 inches. YZONA RV Bumper Hitch says it fits rear beams from 2 to 4 inches, while Fioracl Adjustable Bumper Hitch describes adjustment for varying beam widths and heights.
These claims do not replace checking the actual beam shape, dimensions, clearance, and installation instructions. Frame-mounted choices use a different mounting approach: CURT 13703 is for compatible RV frames, while Stromberg Carlson CC-300 can be bolted or welded to a frame.
Match the mount first, then check that your accessory’s shank fits the 2-inch receiver opening.
How to Choose a Camper Receiver Hitch
Mounting style and fit
Start by matching the hitch mounting style and dimensions to your camper’s frame or bumper. Bumper options vary: TOPTOW TTRV801 and Ohuhu RV Bumper Hitch fit 4-by-4-inch bumpers, while Nilight RV Bumper Hitch is specified for beams from 4 to 4.5 inches. YZONA RV Bumper Hitch lists fit for beams from 2 to 4 inches.
Frame-mounted choices include CURT 13703 for compatible RV frames and Stromberg Carlson CC-300, which offers bolt-on or welded installation. Buyers with a confirmed 4-by-4-inch bumper can consider the matching fixed-fit options; those with a different beam size should prioritize a model with a stated compatible range.
Verify dimensions before ordering.
Load ratings and intended use
Choose a hitch whose stated ratings and approved use match what you plan to carry or tow. CURT 13703 lists 3,500 pounds gross trailer weight and 350 pounds tongue weight, while Nilight RV Bumper Hitch lists 2,000 pounds and 200 pounds respectively. TOPTOW TTRV801 has a listed 350-pound tongue weight but warns against RV-level trailer towing; MaxxHaul 50173 also says it is not intended for that purpose.
The lower limits may suit some rack setups, but they do not remove the need to check bumper and accessory limits. Frame-hitch buyers seeking a stated trailer rating may prefer CURT 13703; accessory-only buyers should follow the product’s stated application and every component’s rating.
Included installation and receiver hardware
Check what arrives with the hitch and what installation its design requires. Ohuhu RV Bumper Hitch includes a hitch pin and receiver cover, while TOPTOW TTRV801 specifies that a 5/8-inch hitch pin or lock is not included. CURT 13703 is an adjustable frame hitch, and Stromberg Carlson CC-300 can be bolted or welded to the frame; the listing does not establish that all installation hardware is included.
If you want a bumper-mounted setup with basic receiver accessories supplied, Ohuhu has a clear advantage in included components. If you choose a frame-mounted hitch, plan to confirm the required mounting hardware and whether your intended installation method is suitable before beginning work.
Which camper receiver hitch should I choose?
Choose CURT 13703 if you need a frame-mounted 2-inch receiver with stated trailer and tongue-weight ratings for a compatible RV frame. For travel trailers or fifth wheels where an adjustable accessory hitch is a better match, consider Stromberg Carlson CC-300 and check whether its bolt-on or welded installation suits your setup. If you want a bumper receiver, first measure the beam: TOPTOW TTRV801 and Ohuhu RV Bumper Hitch fit 4-by-4-inch bumpers, while YZONA RV Bumper Hitch covers a stated 2-to-4-inch range.
Ohuhu includes a hitch pin and cover. For rack or carrier use, follow the product’s stated application and the lowest-rated component.
Do not select a bumper adapter for trailer towing solely because its listing gives a capacity.
Related Buying Guides
- Best Trailer Hitch Receiver
- Best Tow Hitch Receiver
- Best Adjustable Receiver Hitch
- Best Receiver Hitch For Front Of Truck
- Best Shackle Hitch Receiver
- Best Trailer Hitch Receiver Lock
Frequently Asked Questions
How can I tell whether my camper bumper can safely support a receiver and loaded accessory?
Check the camper and receiver documentation for bumper compatibility and the permitted load, then compare those limits with the loaded accessory. Confirm the bumper dimensions match the receiver’s stated fit. The lowest-rated component governs; a stated receiver capacity alone does not establish that your camper bumper can safely carry the load.
Do I need a separate hitch pin, lock, or installation hardware for a bumper receiver?
Check the product listing and installation instructions before buying, because included hardware varies. Ohuhu’s listed receiver includes a hitch pin and cover; that does not establish whether a lock or other installation hardware is included. Confirm the required pin, fasteners, and any locking needs for your chosen receiver and setup.
Can a receiver rated for a bike rack also tow a trailer behind my camper?
Not necessarily. A receiver intended for a bike rack or cargo carrier is not automatically suitable for trailer towing, even if its listing states a capacity. Use a receiver explicitly suited to towing, and verify the camper frame, vehicle limits, and every towing component’s ratings before connecting a trailer.
How should I choose between a frame-mounted and bumper-mounted receiver?
Choose based on the mounting point and intended use. CURT 13703 is the frame-mounted option identified here for compatible RV, camper, and motorhome frames, with stated trailer and tongue-weight ratings. For a bumper-mounted accessory receiver, measure the bumper beam and select a model whose stated fit matches it.
What should I check before installing an adjustable accessory hitch?
Confirm that the hitch is intended for your camper or trailer setup, then check whether its installation method suits your preference and mounting point. For Stromberg Carlson CC-300, the published guidance is to consider whether bolt-on or welded installation fits your setup. Follow its instructions and verify compatibility before installation.
Final Words
For a compatible RV frame and trailer towing, CURT 13703 is the strongest all-around choice here; its stated ratings remain subject to frame, vehicle, and component limits. For an adjustable accessory hitch, consider Stromberg Carlson CC-300 and confirm installation suitability. For bumper-mounted accessories, measure the beam first: TOPTOW and Ohuhu fit 4-by-4-inch bumpers, while YZONA states a 2-to-4-inch range.
Do not infer trailer-towing suitability from a bumper adapter’s capacity.


