A strong floor jack for a lifted truck needs enough lifting height to reach the truck’s lifting points and a capacity suited to the vehicle; the ROAD DAWG ATZ830027HD stands out with a listed range of 3.86 to 30.12 inches. That high reach is unusually relevant here, although its 3-ton rating still needs to match your truck’s requirements. This roundup compares ten jacks, including options rated from 3 to 5 tons, models with maximum heights around 20 inches, and designs that specify a higher reach.
The key is not to choose by tonnage alone: check the truck’s ground clearance, required lift height, and the load the jack must support. Product details do not establish that every model fits every lifted truck, so confirm compatibility before buying.
The ROAD DAWG ATZ830027HD is the strongest match for lifted trucks because its stated lifting range runs from 3.86 to 30.12 inches, the highest maximum listed among these products. Its 3-ton capacity is lower than the 4- and 5-ton alternatives, so verify that it is sufficient for your vehicle and lifting setup. If capacity is the priority, compare the 5-ton options, but their supplied specifications do not state a maximum lifting height.
Our Top Picks
Best OverallIts 3.86-to-30.12-inch range offers the greatest stated reach here, making it the clearest fit for a high-chassis truck; confirm its 3-ton capacity suits your vehicle.
View on Amazon
Highest CapacityThe 5-ton, 11,000-pound rating leads this group by stated capacity, a useful margin for heavy vehicles, though no lift-height range is supplied.
View on Amazon
5-Ton CapacityIts 5-ton, 10,000-pound capacity suits buyers prioritizing load rating, and the dual-piston pump is specified; the listing gives no lift-height range.
View on Amazon- Pickup Clearance AUTOWN JAC-203BL
- Wide Stance BIG RED AT84007R
Compare floor jacks by lift range, capacity, and fit
| # | Product | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. ROAD DAWG ATZ830027HDBest Overall | 6600 lb | Stainless Steel | Car | View on Amazon |
| 2 | 2. Maxority 5-Ton JackHighest Capacity | 11000 lb | Steel | Car | View on Amazon |
| 3 | 3. YELLOW JACKET AS332L5-Ton Capacity | 5 Tons | Alloy Steel | Car | View on Amazon |
| 4 | 4. AUTOWN JAC-203BLPickup Clearance | 6600 lb | Alloy Steel, Aluminum | SUV Truck | View on Amazon |
| 5 | 5. BIG RED AT84007RWide Stance | 4 tons | Steel | Truck | View on Amazon |
| 6 | 6. Jack Boss AS84007Low-clearance shop lifting | 4 tons | Iron | Car | View on Amazon |
| 7 | 7. YELLOW JACKET AS84009Safety-conscious pickup lifting | 4 tons | Alloy Steel | Car, Truck | View on Amazon |
| 8 | 8. AUTOWN JAC-203YL-USStandard-height light pickups | 6600 lbs | Alloy Steel | Fits most standard sedans, SUVs, crossovers… | View on Amazon |
| 9 | 9. SATA 3TSteelUltra-low-entry shop lifting | 3 T | — | Car | View on Amazon |
| 10 | 10. AV Steel AV-402FStandard pickup maintenance | 4 tons | Alloy Steel | Car | View on Amazon |
Detailed Reviews: Best Heavy Duty Floor Jack For Lifted Trucks

#1 · Best Overall
1. ROAD DAWG ATZ830027HD
- Load Capacity: 6600 lb
- Material: Stainless Steel
- Compatible with Vehicle Type: Car
Best for: High-chassis off-road lifting.
Why it ranks #1: Its 3.86-to-30.12-inch range offers the greatest stated reach here, making it the clearest fit for a high-chassis truck; confirm its 3-ton capacity suits your vehicle.
A 30.12-inch maximum lift is the ROAD DAWG’s key advantage for high-chassis vehicles, paired with a 3.86-inch low-profile minimum. That unusually wide stated range supports both low-clearance access and high lifting needs, while its 3-ton rating places a limit on the load it can handle.
The multifunctional bar and foldable reinforced lifting arm are described as providing multiple lifting positions, giving buyers more choices in how they approach a vehicle. Thick U-channel frame side plates are listed for stability, and the dual-pump piston is specified to lift loads five times faster than a single pump. Its 6,600-pound capacity suits the listed sedans, SUVs, and off-road trucks, but buyers must keep the vehicle’s load within that rating.
- 3.86 to 30.12-inch lifting range
- 3-ton (6,600 lb) capacity
- Dual-pump piston specified to lift five times faster than a single pump
- Reinforced foldable arm and thick U-channel frame side plates
- Its 3-ton capacity is lower than the 4- and 5-ton jacks in this roundup.
Skip it if you need more than 6,600 pounds of rated capacity; the BIG RED AT84007R is listed at 4 tons.
This ROAD DAWG suits buyers lifting high-chassis SUVs or off-road trucks who need both a low minimum and a 30.12-inch reach. Keep the vehicle within its 3-ton capacity and account for its substantial 102.2-pound weight.
Full product details
| Brand | ROAD DAWG |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car |
| Included Components | Road Dawg 3 Ton Foldable Floor Jack |
| Item Dimensions | 31.7 x 14.4 x 6.7 inches |
| Item Weight | 102.2 pounds |
| Load Capacity | 6600 pounds |
| Manufacturer | Torin |
| Part Number | ATZ830027HD |
| Manufacturer Warranty Description | 2 |
| Material | Stainless Steel |
| Model Number | ATZ830027HD |
| Style Name | Ultra High |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Road DAWG Low‐Profile High‐Reach Hydraulic 3 Ton Floor Jack, Black
View on Amazon
#2 · Highest Capacity
2. Maxority 5-Ton Jack
- Load Capacity: 11000 lb
- Material: Steel
- Compatible with Vehicle Type: Car
Best for: Higher-capacity workshop lifting.
Why it ranks #2: The 5-ton, 11,000-pound rating leads this group by stated capacity, a useful margin for heavy vehicles, though no lift-height range is supplied.
An 11,000-pound, 5-ton rating is the defining feature of the Maxority floor jack, giving it more stated capacity than the 4-ton options in this roundup. Its low-profile designation and dual-piston quick-lift system target workshop lifting, though the supplied details do not state a numerical lift-height range.
The 5-ton capacity is specified for cars, trucks, and SUVs, making the rating relevant to buyers selecting equipment for heavier vehicles within the jack’s stated use. Dual pistons are described as a quick-lift system, which can reduce pumping effort during raising. The listing also identifies a steel construction and a 100-pound weight; that mass may suit a stationary workshop setup better than frequent repositioning. Check the stated lifting points and vehicle requirements before use.
- 5-ton (11,000 lb) stated load capacity
- Dual-piston quick-lift pump
- Steel construction
- Listed for cars, trucks, and SUVs
- The supplied product details do not give a numerical lift-height range.
Skip it if you need a stated minimum or maximum lift height before choosing; this listing provides no numerical range.
This Maxority is for workshop buyers prioritizing a 5-ton rating and dual-piston lifting for cars, trucks, or SUVs. Its 100-pound weight and unspecified numerical lift range are important boundaries when planning positioning and vehicle access.
Full product details
| Brand | Maxority |
|---|---|
| Color | Black and Red |
| Compatible with Vehicle Type | Car |
| Included Components | Floor Jack |
| Item Weight | 100 pounds |
| Load Capacity | 11000 Pounds |
| Manufacturer | Maxority |
| Part Number | MAX1901-35X |
| Manufacturer Warranty Description | 90 Days Warranty |
| Material | Steel |
| Model Number | MAX1901-35X |
| Style Name | Low Profile |
Listed on Amazon as: 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)
View on Amazon
#3 · 5-Ton Capacity
3. YELLOW JACKET AS332L
- Load Capacity: 5 Tons
- Material: Alloy Steel
- Compatible with Vehicle Type: Car
Best for: Higher-capacity DIY garages.
Why it ranks #3: Its 5-ton, 10,000-pound capacity suits buyers prioritizing load rating, and the dual-piston pump is specified; the listing gives no lift-height range.
A 5-ton, 10,000-pound capacity gives this YELLOW JACKET the highest stated load rating among these products. Its dual-piston quick-lift pump is intended to reduce pumping strokes, a useful workflow feature for home maintenance or professional garage work involving cars, trucks, or SUVs.
The 10,000-pound rating provides a clear capacity figure for buyers selecting a jack for larger vehicles, while the listing names cars, trucks, and SUVs as compatible uses. Dual-piston technology reduces required pumping strokes, according to the product details, which can make repeated raising less tedious. Alloy-steel construction is specified. The supplied information does not provide a numerical minimum or maximum lift height, so buyers cannot assess clearance and final working height from this listing alone.
- 5-ton (10,000 lb) stated capacity
- Dual-piston quick-lift pump reduces required pumping strokes
- Alloy-steel construction
- Listed for cars, trucks, and SUVs
- No numerical minimum or maximum lift height is provided in the supplied details.
Skip it if you need to verify a specific vehicle clearance or working height; this listing gives no numerical lift range.
This YELLOW JACKET suits garage buyers who prioritize a 5-ton rating and reduced pumping strokes for cars, trucks, or SUVs. Confirm the required clearance and working height independently, since the supplied listing gives no numerical lift range.
Full product details
| Brand | YELLOW JACKET |
|---|---|
| Color | Blue |
| Compatible with Vehicle Type | Car |
| Included Components | Floor Jack |
| Load Capacity | 5 Tons |
| Manufacturer | YELLOW JACKET |
| Part Number | AS332L |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Alloy Steel |
| Model Number | AS332L |
Listed on Amazon as: Floor Jack 5 Ton Hydraulic Low Profile Floor Jack with Dual Piston Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles, 5 Ton (10,000 lbs) Capacity, Blue
View on Amazon
#4 · Pickup Clearance
4. AUTOWN JAC-203BL
- Load Capacity: 6600 lb
- Material: Alloy Steel, Aluminum
- Compatible with Vehicle Type: SUV Truck
Best for: High-clearance pickup lifting.
Why it ranks #4: The stated 7.1-to-20.9-inch range is described for pickups and full-size SUVs, offering a higher minimum than low-profile models but limited maximum reach.
A 7.1-to-20.9-inch lift range targets pickups, full-size SUVs, crossovers, and vans with higher frame clearance. The AUTOWN’s 3-ton alloy-steel construction is rated to 6,600 pounds, and its quick-lift hydraulic system is specified for faster raising, making clearance the key fit question.
The minimum height of 7.1 inches means this jack is aimed at vehicles with substantial clearance rather than low-slung cars. Its 20.9-inch maximum height provides lift travel for the listed pickup and SUV use cases, while the 6,600-pound capacity sets the load boundary. Heavy-gauge alloy steel supports demanding garage use, and the cross-shape rubber pad is identified as part of the design. Measure the frame clearance and confirm the vehicle’s lift points before positioning it.
- 3-ton (6,600 lb) capacity
- 7.1-to-20.9-inch lifting range
- Heavy-gauge alloy-steel construction
- Cross-shape rubber pad and quick-lift hydraulic system
- The 7.1-inch minimum height excludes vehicles with lower frame clearance.
Skip it if you service a low-clearance vehicle; the ROAD DAWG ATZ830027HD starts at 3.86 inches.
Choose this AUTOWN for a pickup, full-size SUV, crossover, or van whose frame clears its 7.1-inch minimum. Its 3-ton rating and 20.9-inch maximum should match the vehicle’s load and required working height.
Full product details
| Brand | AUTOWN |
|---|---|
| Color | Blue |
| Compatible with Vehicle Type | SUV Truck |
| Item Dimensions | 23.4 x 7.4 x 7.5 inches |
| Load Capacity | 6600 pounds |
| Manufacturer | AUTOWN |
| Material | Alloy Steel, Aluminum |
| Model Number | JAC-203BL |
| Style Name | floor |
Listed on Amazon as: 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)
View on Amazon
#5 · Wide Stance
5. BIG RED AT84007R
- Load Capacity: 4 tons
- Material: Steel
- Compatible with Vehicle Type: Truck
Best for: Heavy shop and truck service.
Why it ranks #5: A 4-ton capacity, 3-7/8-to-20-inch range, and wide stance provide useful capability, though its maximum height falls well short of the ROAD DAWG.
A 3-7/8-inch minimum height and 20-inch maximum lift give the BIG RED floor jack a broad working range, while its 4-ton capacity suits heavy-duty shop tasks. The dual-piston pump is specified to lift loads five times faster than a single-pump design, reducing pumping between setup and access.
The low-profile entry height can help the jack reach beneath vehicles with limited clearance, and the 20-inch maximum provides room to raise a vehicle for service. Its wide stance is listed for added stability under load, while two large steel casters and two 360-degree swivel casters support repositioning around a garage. At 100.8 pounds, it is a substantial shop tool; plan for moving and storing that weight rather than treating it as a portable jack.
- 4-ton (8,000 lb) capacity
- 3-7/8 to 20-inch lifting range
- Dual-piston pump specified to lift five times faster than a single pump
- Wide stance and four casters, including two swivel casters
- Its listed weight is 100.8 pounds, making frequent solo repositioning demanding.
Skip it if you need a lighter jack to move frequently; the BIG RED weighs 100.8 pounds.
This suits a workshop buyer handling trucks, SUVs, or general heavy-duty service who values a low entry point and long lift range. Account for its 100.8-pound weight when planning storage and movement around the work area.
Full product details
| Brand | BIG RED |
|---|---|
| Color | Red |
| Compatible with Vehicle Type | Truck |
| Included Components | Floor Jack, User Manual |
| Item Dimensions | 7.9 x 15.8 x 31.2 inches |
| Item Weight | 100.8 pounds |
| Load Capacity | 4 tons |
| Manufacturer | BIG RED |
| Part Number | AT84007R |
| Manufacturer Warranty Description | Includes a limited 1 year manufacturer warranty |
| Material | Steel |
| Model Number | AT84007R |
| Style Name | Steel |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Big RED 4 Ton (8,000 lb) Hydraulic Low Profile Service Floor Jack
View on Amazon
#6
6. Jack Boss AS84007
- Load Capacity: 4 tons
- Material: Iron
- Compatible with Vehicle Type: Car
Best for: Low-clearance shop lifting.
Why it ranks #6: This 4-ton jack reaches 20 inches and has a wide stance, but its specified maximum lift is substantially below the high-reach option.
The Jack Boss starts at 3.9 inches and reaches 20 inches, giving this 4-ton low-profile jack a useful span from under-vehicle access to service height. Its dual-piston pump is specified to lift five times faster than a single pump, a practical advantage when repeated lifting is part of shop work.
A 4-ton rating and stated compatibility with cars, trucks, and SUVs make this a broad-use shop option, while the 3.9-inch minimum height addresses low-profile access. The 20-inch maximum provides working clearance after lifting, and the wide stance is listed to add stability under load. The product information gives its weight as 45.36 kg, so buyers should consider that substantial mass when moving it between bays or arranging storage.
- 4-ton (8,800 lb) capacity
- 3.9-inch minimum and 20-inch maximum lift height
- Dual-piston pump specified to lift five times faster than a single pump
- Wide stance listed for added stability under load
- The listed 45.36 kg weight makes it a substantial jack to move.
Skip it if you need a jack that is easy to carry between locations; its listed weight is 45.36 kg.
Pick this Jack Boss for shop lifting where low-profile access, a 20-inch maximum height, and a 4-ton rating suit the vehicle and task. Its substantial listed weight is worth factoring into storage and positioning.
Full product details
| Brand | Jack Boss |
|---|---|
| Color | Red |
| Compatible with Vehicle Type | Car |
| Item Dimensions | 13 x 6 x 28 inches |
| Item Weight | 45.36 kg |
| Load Capacity | 4 tons |
| Manufacturer | JACK BOSS |
| Part Number | AS84007- |
| Manufacturer Warranty Description | 1 YEAR |
| Material | Iron |
| Model Number | AS84007- |
| Style Name | Low profile |
Listed on Amazon as: Jack Boss 4 Ton Floor Jack Hydraulic Low Profile Floor Jack with Dual Piston Quick Lift Pump, 4 Ton (8,800 lbs) Capacity, Red
View on Amazon
#7
7. YELLOW JACKET AS84009
- Load Capacity: 4 tons
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, Truck
Best for: Safety-conscious pickup lifting.
Why it ranks #7: Its 4-ton rating and 19-7/8-inch maximum height offer a capable general-purpose range, but the listed minimum is 4-5/16 inches and reach is limited.
A built-in overload safety valve is the YELLOW JACKET’s clearest practical feature, intended to protect both the user and jack from overload. Its 4-ton capacity and 19-7/8-inch maximum lift make it a candidate for truck and car maintenance, with a 4-5/16-inch minimum height to account for.
The 4-ton rating supports loads up to 8,800 pounds, while the lift range runs from 4-5/16 to 19-7/8 inches. That maximum height gives useful lift travel for service, and the overload valve adds a stated safeguard against exceeding the jack’s limits. Heavy-duty alloy steel construction is listed, and compatibility includes cars and trucks. Because the minimum height is above four inches, assess the vehicle’s clearance and lifting point before attempting access.
- 4-ton (8,800 lb) capacity
- Lift range from 4-5/16 to 19-7/8 inches
- Built-in overload safety valve
- Heavy-duty alloy-steel construction
- Its 4-5/16-inch minimum height may not clear vehicles with lower lifting points.
Skip it if you need a jack with a minimum height below 4-5/16 inches; this model starts at that listed height.
Choose this YELLOW JACKET for car or truck maintenance when the overload valve, 4-ton rating, and nearly 20-inch maximum lift suit the task. Its 4-5/16-inch minimum height sets a firm clearance boundary.
Full product details
| Brand | YELLOW JACKET |
|---|---|
| Color | Steel |
| Compatible with Vehicle Type | Car, Truck |
| Included Components | floor jack |
| Item Dimensions | 14.8 x 29.7 x 7.3 inches |
| Item Weight | 87 pounds |
| Load Capacity | 4 tons |
| Manufacturer | Torin |
| Part Number | AS84009 |
| Manufacturer Warranty Description | 1 year |
| Material | Alloy Steel |
| Model Number | AS84009 |
| Style Name | Floor Jack |
Listed on Amazon as: YELLOW JACKET Low Profile Floor Jack with Dual Pumps Quickly Lift Hydraulic Car Jack with Pad, 4 Ton (8,800 lb) Capacity
View on Amazon
#8
8. AUTOWN JAC-203YL-US
- Load Capacity: 6600 lbs
- Material: Alloy Steel
- Compatible with Vehicle Type: Fits most standard sedans, SUVs, crossovers…
Best for: Standard-height light pickups.
Why it ranks #8: The 6,600-pound rating and 7.1-inch minimum suit some pickups, but the listing specifically excludes lowered or low-clearance vehicles and gives no maximum height.
A 7.1-inch minimum height clearly positions this 3-ton AUTOWN for standard-height vehicles rather than lowered or low-clearance models. Its 6,600-pound capacity covers the listed range of sedans, SUVs, crossovers, and light pickups, while the heavy-duty steel body and rust-resistant surface finish suit household or professional repair work.
The product’s stated compatibility includes standard sedans, SUVs, crossovers, and light pickups, with the 7.1-inch minimum height setting a decisive clearance threshold. Its 6,600-pound rating provides the load limit, and heavy-duty steel construction with a rust-resistant surface finish is listed for stable performance in varied environments. A quick-lift pump supports the lifting workflow, and the included rubber saddle is part of the package. Measure clearance before choosing it for a vehicle.
- 3-ton (6,600 lb) capacity
- Quick-lift hydraulic pump
- Heavy-duty steel construction
- Rust-resistant surface finish and included rubber saddle
- The 7.1-inch minimum height makes it unsuitable for lowered or low-clearance vehicles.
Skip it if you lift a lowered or low-clearance vehicle; the ROAD DAWG ATZ830027HD has a 3.86-inch minimum height.
Choose this AUTOWN for standard-height sedans, SUVs, crossovers, or light pickups within its 6,600-pound capacity. Its 7.1-inch minimum height is the key boundary, so it does not suit lowered or low-clearance vehicles.
Full product details
| Brand | AUTOWN |
|---|---|
| Color | Yellow |
| Compatible with Vehicle Type | Fits most standard sedans, SUVs, crossovers, and light pickups. Min. height: 7.1". NOT for lowered or low-clearance vehicles. Measure your ground clearance before ordering. |
| Included Components | Hydraulic Floor Jack, Rubber Saddle * 3 |
| Item Dimensions | 23.4 x 7.5 x 7.4 inches |
| Item Weight | 36.3 pounds |
| Load Capacity | 6600 lbs |
| Manufacturer | AUTOWN |
| Part Number | JAC-203YL-CA |
| Manufacturer Warranty Description | 1-Year Limited Warranty |
| Material | Alloy Steel |
| Model Number | JAC-203YL-US |
| Style Name | Heavy Duty |
Listed on Amazon as: Heavy Duty 3 Ton Floor Jack, Hydraulic Car Jack with Quick Lift Pump
View on Amazon
#9
9. SATA 3TSteel
- Load Capacity: 3 T
- Compatible with Vehicle Type: Car
Best for: Ultra-low-entry shop lifting.
Why it ranks #9: Its 3-ton capacity and 2-11/16-inch ultra-low profile target low-clearance access, not lifted-truck reach; no maximum lifting height is provided.
A 2-11/16-inch ultra-low profile gives the SATA jack an unusually low stated entry height for reaching beneath low-clearance vehicles. It carries a 3-ton, 6,600-pound rating and uses a dual-piston quick-lift pump, while its overload testing is specified at 1.5 times rated capacity.
The 2-11/16-inch minimum is the main access advantage, helping the jack reach lifting points that require a very low entry height. Its dual-piston pump is described as quick-lift technology, and the 3-ton capacity defines the maximum rated load. Thickened industrial-grade steel is specified to resist frame deformation under pressure. The product is tested to 4.5 tons, or 9,900 pounds, but that test figure does not change its rated 6,600-pound capacity.
- 2-11/16-inch ultra-low profile
- 3-ton (6,600 lb) rated capacity
- Dual-piston quick-lift pump
- Tested to 1.5 times rated capacity
- Its 3-ton rating limits it to loads no greater than 6,600 pounds.
Skip it if you need a rated capacity above 6,600 pounds; the Maxority MAX1901-35X is rated at 11,000 pounds.
This SATA suits buyers who need very low entry access for a vehicle within the 3-ton rating, including home or professional service use. Its 1.5-times overload test is not a substitute for respecting the 6,600-pound rated limit.
Full product details
| Brand | SATA |
|---|---|
| Color | GREEN |
| Compatible with Vehicle Type | Car |
| Included Components | USER MANUAL |
| Item Dimensions | 28.35 x 13.58 x 6.3 inches |
| Item Weight | 70 pounds |
| Load Capacity | 3 T |
| Manufacturer | SATA |
| Part Number | jack |
| Manufacturer Warranty Description | 1 |
| Model Number | 3TSteel |
Listed on Amazon as: SATA 3-Ton (6,600 lb) Heavy-Duty Steel Floor Jack Ultra-Low Profile Design (2-11/16” Height) with Dual-Piston Quick Lift Pump, Tested for 1.5X Overload for Ultimate Safety
View on Amazon
#10
10. AV Steel AV-402F
- Load Capacity: 4 tons
- Material: Alloy Steel
- Compatible with Vehicle Type: Car
Best for: Standard pickup maintenance.
Why it ranks #10: Although it has a 4-ton capacity and reaches 19-3/4 inches, its listing explicitly says it is not recommended for lifted vehicles.
A 4-ton rating paired with a 19-3/4-inch maximum lift gives this AV Steel jack useful reach for many standard pickups, SUVs, vans, and cars. Its 4-1/4-inch minimum height sets a clear clearance requirement, so it is a better match for ordinary vehicle maintenance than lifted-truck work.
The dual-piston pump is identified in the product specifications, while the 4-ton capacity supports lifting vehicles within its stated compatibility range. A lift span from 4-1/4 to 19-3/4 inches provides working height for standard cars, vans, SUVs, and pickups, but the listing specifically excludes lifted vehicles, sports cars, RVs, and heavy commercial trucks. Measure the vehicle’s lifting point and clearance before choosing it; its stated range does not make it a lifted-truck jack.
- 4-ton (8,000 lb) rated capacity
- Lift range from 4-1/4 to 19-3/4 inches
- Dual-piston style
- Listed for standard pickups, SUVs, vans, and cars
- The listing specifically says it is not recommended for lifted vehicles.
Skip it if you need a jack for a lifted truck; this model is explicitly not recommended for lifted vehicles.
Choose this AV Steel jack for routine lifting of a standard pickup, SUV, van, or car within its stated capacity. Its 4-1/4-inch minimum height and explicit lifted-vehicle exclusion make it a poor fit for lifted-truck work.
Full product details
| Brand | AV Steel |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Car |
| Included Components | Floor jack X 1 |
| Item Dimensions | 31.69 x 14.56 x 8.07 inches |
| Load Capacity | 4 tons |
| Manufacturer | AV Steel |
| Part Number | AV-402F |
| Manufacturer Warranty Description | 1 Year Warranty |
| Material | Alloy Steel |
| Model Number | AV-402F |
| Style Name | Dual Piston |
Why maximum lift height can be the limiting factor
Maximum lift height can rule out a jack even when its capacity looks adequate. Among the products with a stated range, the ROAD DAWG ATZ830027HD reaches 30.12 inches, while the BIG RED AT84007R and Jack Boss AS84007 top out at 20 inches. A truck that needs more rise than a jack can provide cannot be lifted to the required position by choosing a higher-tonnage model alone.
There is also a compatibility trap: the two 5-ton jacks list capacities but do not provide a lift-height range in the supplied details. Do not assume their higher ratings mean they will reach a lifted truck’s frame.
Compare the truck’s starting clearance and required lifting-point height with both ends of the jack’s stated range, and confirm the range works with the actual setup before purchase.
A floor jack is for lifting, not supporting
A floor jack raises a vehicle, but the supplied product details do not establish that any of these jacks can safely support a truck while someone works underneath it. Capacity ratings and lifting ranges describe the jack’s stated lifting capability; they do not replace a separate support plan. A lifted truck can also call for substantial extension, so check that the jack remains positioned correctly and reaches the intended lifting point throughout the lift.
Follow the vehicle and jack instructions, use the specified lifting points, and use appropriately rated jack stands on a stable surface before going under a raised vehicle. The BIG RED listing mentions a wide stance for stability under load, but that feature is not a substitute for stands.
If the jack’s instructions or the truck’s lifting requirements are unclear, resolve that before attempting a lift.
How to Choose a Lifted-Truck Floor Jack
Maximum lifting height
Look for a maximum lift height that reaches the truck’s required lifting position, not just a jack that clears its starting point. The ROAD DAWG ATZ830027HD lists a maximum of 30.12 inches; the BIG RED AT84007R and Jack Boss AS84007 each list 20 inches, while the AV Steel AV-402F reaches 19-3/4 inches. The 5-ton Maxority and YELLOW JACKET AS332L listings do not provide a range, so their reach cannot be compared from these details.
Buyers whose trucks need greater extension should favor a stated high-reach range; buyers with a more modest required lift can consider the lower maxima after measuring and confirming fit.
Rated lifting capacity
Choose a rated capacity that meets the vehicle and lifting requirements, rather than treating the highest number as universally necessary. The listed options range from 3 tons, or 6,600 pounds, for the ROAD DAWG ATZ830027HD and SATA 3TSteel to 4 tons for several models and 5 tons for the Maxority and YELLOW JACKET AS332L. The Maxority lists 11,000 pounds, the highest stated capacity, while the YELLOW JACKET AS332L lists 10,000 pounds.
A buyer needing the most stated capacity may prefer the Maxority; someone whose decisive need is extra lifting height may prefer the ROAD DAWG, provided its 3-ton rating is sufficient.
Minimum height and vehicle clearance
Check the jack’s minimum height against the truck’s actual access and lifting-point clearance. The SATA 3TSteel is listed at 2-11/16 inches and the BIG RED AT84007R at 3-7/8 inches, while the AUTOWN JAC-203BL and JAC-203YL-US start at 7.1 inches. These figures represent different fit trade-offs: a low minimum can help when access is tight, whereas a 7.1-inch minimum may better suit the higher-clearance vehicles these AUTOWN models describe.
Still, minimum height alone does not prove a model fits a lifted truck; the AUTOWN JAC-203YL-US is expressly not for low-clearance vehicles. Measure the intended access point and check the complete lift range.
Which Floor Jack Fits Your Lifted Truck?
For the greatest stated lifting reach, choose the ROAD DAWG ATZ830027HD: its range extends to 30.12 inches, but its 3-ton rating must meet your truck’s requirements. If load capacity matters most and you can verify the jack’s reach separately, consider the Maxority 5-Ton Jack at 11,000 pounds or the YELLOW JACKET AS332L at 10,000 pounds; neither supplied listing states a lift-height range. For a truck whose required lift is within 20 inches, the 4-ton BIG RED AT84007R or Jack Boss AS84007 lists a 20-inch maximum.
Avoid the AV Steel AV-402F for this use: its listing says it is not recommended for lifted vehicles. Match minimum height, maximum height, and capacity to your truck before choosing.
Related Buying Guides
- Best Heavy Duty Truck Floor Mats
- Best Jacks For Lifted Trucks
- Best Heavy Duty Car Jack
- Best Heavy Duty Trailer Jack
- Best Floor Jack For Truck
- Best Heavy Duty Hydraulic Jack
Frequently Asked Questions
How do I determine the minimum lift height my lifted truck needs?
Measure the clearance from the ground to the truck’s approved jacking point, then check the jack’s minimum height. The jack must fit beneath that point before lifting. Also verify that its maximum height provides enough clearance for the task, and confirm the jack’s capacity suits your vehicle and lifting setup.
Where should I place a floor jack on a lifted truck?
Place the jack only at a jacking point approved by the truck manufacturer, as identified in the owner’s manual. Use a firm, level surface and make sure the jack saddle contacts the point securely. If you cannot identify a suitable point or the setup feels unstable, stop and consult a qualified technician.
Can a floor jack support a truck while I work underneath it?
No. A floor jack is for lifting, not for holding a vehicle while someone works underneath. Once the truck is raised, support it with appropriately rated jack stands positioned at approved support points, following the vehicle and stand instructions.
Never get beneath a vehicle supported only by a jack.
Should I prioritize lift height or capacity when choosing a jack?
Both must meet your requirements; neither can substitute for the other. The ROAD DAWG listing states a 30.12-inch maximum lift and 3-ton capacity, while the 5-ton listings do not state a maximum lift height. Check your truck’s required reach and lifting setup, and verify capacity before choosing.
What should I check before using a floor jack on a lifted truck?
Confirm the jack’s minimum and maximum heights, rated capacity, and compatibility with the truck’s approved jacking points. Check the jack and its instructions for condition and proper operation, and use it on a firm, level surface. Do not proceed if the fit, contact, or stability is uncertain.
Final Words
For the greatest stated lifting reach, the ROAD DAWG ATZ830027HD is the strongest match, with a listed range up to 30.12 inches; confirm its 3-ton rating is sufficient for your truck and setup. If capacity takes priority, compare the 5-ton options, but verify their reach because their supplied specifications omit maximum lift height. For a lift within 20 inches, the 4-ton BIG RED or Jack Boss lists a 20-inch maximum.
Match all requirements before buying.


