A strong 4-inch lift kit gives a compatible truck or 4×4 a raised stance, with the right components and fitment for its specific make and model. This roundup compares kits for Silverado and Sierra 1500, Ram 1500, Jeep Wrangler and CJ, and Toyota Land Cruiser vehicles. The listings vary in front-to-rear lift, included shocks, tire guidance, and installation requirements, so “4-inch” alone is not enough to establish compatibility.
Start with your vehicle’s exact year, drivetrain, body style, and suspension configuration; then compare lift height and included hardware. Some kits offer bolt-on installation, while others flag possible exhaust, driveshaft, or wheel-spacer needs.
One Super Duty option is only 2.5 inches in front, and one listing does not state its application or lift height, making careful listing verification especially important.
For a listed 4-inch kit with clearly specified truck fitment, ReadyLIFT 69-39400 is the strongest overall choice. It fits 2019–2023 Chevy Silverado and GMC Sierra 1500 models, excluding Trail Boss and AT4, and provides 4 inches of front lift with 3 inches in the rear. The listing also gives tire guidance and says installation requires no cutting or modifications.
Confirm your trim and suspension configuration before ordering, since the stated compatibility excludes some trucks.
Our Top Picks
Best OverallFits specified Silverado and Sierra 1500 models and provides 4 inches front, 3 inches rear, tire guidance, and installation without cutting.
View on Amazon
Bilstein Shock KitOffers a 4-inch front and 2-inch rear lift for specified 4WD Ram 1500 models, with Bilstein 5100 rear shocks included.
View on Amazon
Ram Control ArmsFits 2009–2017 Ram 1500 4WD, includes tubular upper control arms, and allows tires up to 35×12.50 inches.
View on Amazon- Ram 2WD Fitment Rough Country 30730
Compare these 4-inch lift kit options and fitments
| # | Product | Weight | Material | Material Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. ReadyLIFT 69-39400Best Overall | 60 lb | Alloy Steel, Aluminum, Cast Iron | Alloy Steel, Aluminum, Cast Iron | View on Amazon |
| 2 | 2. ReadyLIFT 69-1041Bilstein Shock Kit | — | Steel | Steel | View on Amazon |
| 3 | 3. ReadyLIFT 69-1040Ram Control Arms | 38.2 lb | Aluminum | Aluminum | View on Amazon |
| 4 | 4. Rough Country 30730Ram 2WD Fitment | 91.2 lb | Alloy Steel | Alloy Steel | View on Amazon |
| 5 | 5. BDS 4-Inch CJ KitCJ5 and CJ7 suspension upgrade | 93.9 lb | Alloy Steel, Durable Coatings… | Alloy Steel, Durable Coatings… | View on Amazon |
| 6 | 6. Rough Country 73530Classic Land Cruiser owners | 192.5 lb | Alloy Steel | Alloy Steel | View on Amazon |
| 7 | 7. maXpeedingrods Jeep JKU KitFour-door Wrangler JK builders | 104.5 lb | — | — | View on Amazon |
| 8 | 8. Traxda 102040Stock-ride bolt-in seekers | — | Carbon Steel | Carbon Steel | View on Amazon |
| 9 | 9. Pro Comp 51028B1Buyers verifying fitment first | 69 lb | Metal | Metal | View on Amazon |
| 10 | 10. ReadyLIFT 69-2740Single-rear-wheel Super Duty owners | 79 lb | Steel | Steel | View on Amazon |
Detailed Reviews: Best 40 Inch Lift Kit

#1 · Best Overall
1. ReadyLIFT 69-39400
- Weight: 60 lb
- Material: Alloy Steel, Aluminum, Cast Iron
- Material Type: Alloy Steel, Aluminum, Cast Iron
Best for: ARC Silverado and Sierra owners.
Why it ranks #1: Fits specified Silverado and Sierra 1500 models and provides 4 inches front, 3 inches rear, tire guidance, and installation without cutting.
A 4-inch front lift paired with a 3-inch rear lift gives this ReadyLIFT kit its defining stance change for compatible 2019–2023 Chevy Silverado and GMC Sierra 1500 trucks. Its stated ARC compatibility extends the listed application to trucks with Adaptive Ride Control, while the no-cut installation claim points to a more direct path to the raised setup.
The front and rear lift amounts are specified separately, so buyers can assess the resulting stance rather than assume an even lift at both ends. ReadyLIFT lists tire clearance for up to 20×9 wheels and 295/65R20 tires on 2019–2022 Chevy models, with different 295/55R20 coverage for listed GMC and 2023 Chevy applications. No cutting or modifications are required, and the product description says it works with ARC and non-ARC trucks.
- 4-inch front and 3-inch rear lift
- Listed for 2019–2023 Silverado and Sierra 1500
- Compatible with Adaptive Ride Control suspension
- No cutting or modifications required for installation
- Tire-size recommendations vary by model and year.
Skip it if you need an even 4-inch lift front and rear; BDS’s 4-inch CJ5/CJ7 kit specifies a full suspension lift.
A fit for Silverado and Sierra 1500 owners seeking a lifted front-and-rear stance while retaining ARC compatibility. Check the listed year and tire combination for your truck; the specified front and rear lift heights are not equal.
Full product details
| Brand | Readylift |
|---|---|
| Included Components | 4.0'' SST Lift Lit |
| Item Weight | 60 pounds |
| Manufacturer | ReadyLIFT |
| Part Number | 69-39400 |
| Manufacturer Warranty Description | Please see manufacturer |
| Material | Alloy Steel, Aluminum, Cast Iron |
| Model Number | 69-39400 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: ReadyLIFT 69-39400 4.0'' SST Lift Lit For Chevrolet/GMC 1500 (Excludes Trail Boss, At4) 2WD, 4WD
View on Amazon
#2 · Bilstein Shock Kit
2. ReadyLIFT 69-1041
- Material: Steel
- Material Type: Steel
Best for: Ram owners wanting Bilstein rears.
Why it ranks #2: Offers a 4-inch front and 2-inch rear lift for specified 4WD Ram 1500 models, with Bilstein 5100 rear shocks included.
Bilstein 5100 series rear shocks are the defining addition to this ReadyLIFT 4-inch-front, 2-inch-rear kit for listed Ram 1500 4WD trucks. The supplied fitment covers 2009–2018 models and 2019 Classic body style, and the installation is described as bolt-on with no modifications required.
The 4-inch front and 2-inch rear lift figures define the stance, while the included Bilstein 5100 series rear shocks distinguish this package from a lift-only description. ReadyLIFT states that installation is bolt-on and requires no modifications, which gives buyers a clear installation claim to weigh. The listing allows tires up to 35 inches and identifies a specific Ram 4WD year range, including 2019 Classic body style, so both tire diameter and body style matter.
- 4-inch front and 2-inch rear lift
- Bilstein 5100 series rear shocks included
- Bolt-on installation with no modifications required
- Allows tires up to 35 inches
- Fitment is limited to the listed Ram 4WD years and Classic body style.
Skip it if you have a 2019 non-Classic Ram or factory air suspension; ReadyLIFT 69-1040 lists 2009–2017 Ram 1500 4WD, though not factory-air fitment.
This suits owners of the listed 2009–2018 or 2019 Classic-body Ram 1500 4WD who want Bilstein rear shocks with a 4-inch front lift. Confirm the body style and 35-inch tire boundary against your setup.
Full product details
| Brand | Readylift |
|---|---|
| Included Components | 4.0'' Front with 2.0'' Rear SST Lift Kit with Bilstein Rear Shocks |
| Manufacturer | ReadyLift |
| Part Number | 69-1041 |
| Manufacturer Warranty Description | See product page |
| Material | Steel |
| Model Number | 69-1041 |
Listed on Amazon as: Readylift 69-1041 4.0'' Front with 2.0 SST Lift Kit with Bilstein Rear Shocks
View on Amazon
#3 · Ram Control Arms
3. ReadyLIFT 69-1040
- Weight: 38.2 lb
- Material: Aluminum
- Material Type: Aluminum
Best for: Ram 1500 4WD tire upgrade.
Why it ranks #3: Fits 2009–2017 Ram 1500 4WD, includes tubular upper control arms, and allows tires up to 35×12.50 inches.
Tubular upper control arms distinguish this ReadyLIFT 4-inch-front, 2-inch-rear kit for 2009–2017 Dodge Ram 1500 4WD trucks. The listing allows tires up to 35×12.50, giving buyers a concrete tire-size reference alongside the lift, but explicitly excludes trucks with factory air suspension.
The separate 4-inch front and 2-inch rear lift figures clarify the kit's intended stance, while the included tubular upper control arms identify a major suspension component in the package. Its stated capacity for up to 35×12.50 tires helps frame wheel-and-tire planning. Compatibility is limited by the listing to 2009–2017 Ram 1500 4WD trucks, and factory air suspension is specifically excluded, making that equipment check essential.
- 4-inch front and 2-inch rear lift
- Listed for 2009–2017 Ram 1500 4WD
- Tubular upper control arms included
- Allows tires up to 35×12.50
- Not for trucks with factory air suspension.
Skip it if you have factory air suspension or a 2018 Ram; ReadyLIFT 69-1041 lists 2009–2018 and 2019 Classic 4WD fitment.
A candidate for 2009–2017 Ram 1500 4WD owners seeking a 4-inch front lift, included tubular upper control arms, and support for tires up to 35×12.50. Factory air suspension is outside its stated fitment.
Full product details
| Brand | Readylift |
|---|---|
| Included Components | 4.0'' Front with 2.0'' Rear SST Lift Kit |
| Item Weight | 38.2 pounds |
| Manufacturer | ReadyLift |
| Part Number | 69-1040 |
| Material | Aluminum |
| Model Number | 69-1040 |
Listed on Amazon as: ReadyLift 69-1040 4.0'' Front with 2.0'' Rear SST Lift Kit 4" – Dodge Ram 1500 4WD
View on Amazon
#4 · Ram 2WD Fitment
4. Rough Country 30730
- Weight: 91.2 lb
- Material: Alloy Steel
- Material Type: Alloy Steel
Best for: Two-wheel-drive Ram owners.
Why it ranks #4: Provides a 4-inch lift for 2009–2018 Ram 1500 2WD, with N3 shocks and listed components including lifted knuckles and brake-line brackets.
Lifted knuckles set this Rough Country kit apart for 2009–2018 Ram 1500 2WD trucks, creating the basis for its stated 4-inch suspension lift and increased ground clearance. Premium N3 shocks are included at both ends, with the listing positioning them for on- and off-road use while retaining an OEM-like ride.
The kit pairs lifted knuckles with coil spacers, retainers, sway-bar links, bump-stop brackets, and brake-line brackets, giving the listed 2WD Ram application a broad set of suspension components rather than a single spacer. Front and rear N3 shocks are included, and the listing says they support a smooth, OEM-like ride. Rough Country also describes the lift as leveling the front with the rear, a practical stance consideration for buyers seeking a more even profile.
- Listed for 2009–2018 Ram 1500 2WD
- 4-inch lift with increased ground clearance
- Front and rear Premium N3 shocks included
- Listing describes a leveled stance and OEM-like ride
- The listed application is 2WD only.
Skip it if you have a 4WD Ram 1500; ReadyLIFT 69-1040 is listed for 2009–2017 Ram 1500 4WD trucks.
A relevant choice for 2009–2018 Ram 1500 2WD owners seeking a 4-inch lift, included N3 shocks, and a leveled look. Its stated 2WD application is the key boundary; it is not listed for 4WD trucks.
Full product details
| Brand | Rough Country |
|---|---|
| Included Components | Lifted knuckles, Brake line brackets, Hardware, Coil spacers, Coil retainers, Sway-bar links, Bump-stop brackets, Brake line brackets, Hardware, (2) Front Premium N3 series, (2) Rear Premium N3 series, See more |
| Item Weight | 91.2 pounds |
| Manufacturer | Rough Country |
| Part Number | 30730 |
| Manufacturer Warranty Description | Limited Lifetime |
| Material | Alloy Steel |
| Model Number | 30730 |
| Additional Information | Important information Safety Information "RC recommends a certified technician install lift systems. Knowledge of RC instructions, suspension procedures and post install checks are required. If a system is installed w/o knowledge and expertise it may impact the integrity/operating safety." |
Listed on Amazon as: Rough Country 4" Lift Kit w/ N3 Shocks for 2009-2018 Ram 1500 2WD – 30730
View on Amazon
#5
5. BDS 4-Inch CJ Kit
- Weight: 93.9 lb
- Material: Alloy Steel, Durable Coatings…
- Material Type: Alloy Steel, Durable Coatings…
Best for: CJ5 and CJ7 suspension upgrade.
Why it ranks #5: A 4-inch front-and-rear suspension kit for 1982–1986 Jeep CJ5/CJ7, with leaf springs and a listed transfer-case lowering kit.
Glide-Ride leaf springs distinguish this BDS 4-inch kit for 1982–1986 Jeep CJ5 and CJ7 applications, where the listing connects the springs to full lift height and increased capacity. A bolt-on installation is also specified, giving owners a defined installation approach without describing a cutting requirement.
The front and rear spring components support the listed full-suspension lift, while the included transfer-case lowering kit addresses another part of the installation package. BDS also lists vehicle-specific valving for its NX2 Nitro shocks to improve control; the product title and included components additionally identify FOX 2.0 shocks, so buyers should review the exact kit contents. The description says the system accommodates tires up to 33 inches, a useful stated limit when planning the setup.
- 4-inch front-and-rear suspension lift
- Glide-Ride leaf springs for full lift height and increased capacity
- 100% bolt-on installation
- Listing states compatibility with tires up to 33 inches
- Shock details differ between the title and feature listing.
Skip it if you have a Ram 1500 rather than a CJ5 or CJ7; Rough Country’s 30730 is listed for 2009–2018 Ram 1500 2WD.
Consider this BDS kit for owners of a listed 1982–1986 CJ5 or CJ7 who want a 4-inch full suspension lift and a stated 33-inch tire limit. Confirm the shock configuration in the supplied listing before choosing.
Full product details
| Brand | Bds |
|---|---|
| Included Components | 4 inch Front Spring, Box Kit, Fox 2.0 Shock 26.35 x 16.75 x 2- EB1/EB1, Pitman Arm, Rear Spring, Transfer Case Lowering Kit See more |
| Item Weight | 93.9 pounds |
| Manufacturer | BDS Suspension |
| Part Number | BDS406FS |
| Manufacturer Warranty Description | Limited lifetime No Fine Print Warranty |
| Material | Alloy Steel, Durable Coatings, High-Performance Polymers, Polyurethane (PU) |
| Model Number | 4 Inch Suspension Lift Kit |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: BDS406FS | 4 Inch Full Suspension Lift Kit (Front & Rear) | FOX 2.0 Shocks | Compatible with Jeep CJ5/CJ7 (82-86)
View on Amazon
#6
6. Rough Country 73530
- Weight: 192.5 lb
- Material: Alloy Steel
- Material Type: Alloy Steel
Best for: Classic Land Cruiser owners.
Why it ranks #6: Specifically fits 1964–1980 Toyota Land Cruiser 4WD and supplies a 4-inch lift with N3 shocks, though the listed kit is vehicle-specific.
A 4-inch suspension lift for 1964–1980 Toyota Land Cruiser 4WD models is the core of this Rough Country kit. Its N3 shocks are listed for on- and off-road use, while the description says the lift brings the front level with the rear and maintains factory ride quality.
The stated 4-inch lift and front-to-rear leveling address both added ride height and stance, rather than leaving buyers to infer the intended profile. Rough Country pairs the system with N3 shock absorbers, which the listing identifies for on- and off-road performance. The product also claims factory ride quality and easy at-home installation, though its safety information recommends a certified technician familiar with suspension procedures and post-install checks.
- 4-inch lift for 1964–1980 Land Cruiser 4WD
- N3 shocks listed for on- and off-road use
- Description says front is raised to match rear
- Factory ride quality is claimed
- Rough Country recommends certified-technician installation.
Skip it if you need a listed 4-inch lift for a Ram 1500 2WD; Rough Country 30730 specifies that application and includes N3 shocks.
A fit for classic 1964–1980 Land Cruiser 4WD owners seeking a 4-inch lift, N3 shocks, and a leveled stance. Installation is an important boundary: the safety information recommends a certified technician and post-install checks.
Full product details
| Brand | Rough Country |
|---|---|
| Included Components | Lift Kit |
| Item Weight | 192.5 pounds |
| Manufacturer | Rough Country |
| Part Number | 73530 |
| Manufacturer Warranty Description | Limited |
| Material | Alloy Steel |
| Model Number | 73530 |
| Additional Information | Important information Safety Information "RC recommends a certified technician install lift systems. Knowledge of RC instructions, suspension procedures and post install checks are required. If a system is installed w/o knowledge and expertise it may impact the integrity/operating safety." |
Listed on Amazon as: Rough Country 4" Lift Kit w/N3 Shocks for 64-80 FJ-40 Land Cruiser 4WD – 73530
View on AmazonWhy it ranks #7: Provides a 4-inch lift for Jeep Wrangler Unlimited models, but lists possible exhaust, driveshaft, and wheel-spacer requirements to check.
A 4-inch lift for the Jeep Wrangler JK Unlimited 4-door is the defining application of this maXpeedingrods kit. Its fitment list covers several Unlimited trims, including Sport, Sahara, Rubicon, and selected special editions, while the supplied notes flag drivetrain-clearance and wheel-spacing considerations that affect installation planning.
The listed fitment spans specified Wrangler Unlimited trims and years from 2007 through 2017, with the title also identifying JK Unlimited 4-door models through 2018. That makes checking the exact trim and model year important before ordering. The notes say 2012–2018 models may need exhaust modifications for front driveshaft clearance, and stock wheels require 1.5-inch spacers. Automatic-transmission vehicles may need a smaller-diameter aftermarket front driveshaft; the pitman arm is not included.
- 4-inch suspension lift for Wrangler JK Unlimited 4-door
- Fitment lists Sport, Sahara, and Rubicon trims
- Notes identify potential front-driveshaft clearance needs
- Fitment notes specify stock-wheel spacer requirement
- Pitman arm is not included.
Skip it if you want a kit with no listed driveshaft or exhaust considerations; ReadyLIFT 69-39400 says no cutting or modifications are required.
This kit suits Wrangler JK Unlimited 4-door owners whose trim and year match the supplied fitment list and who can plan around the stated clearance notes. Factor in the unincluded pitman arm and possible additional components before installation.
Full product details
| Brand | maXpeedingrods |
|---|---|
| Item Weight | 104.5 pounds |
| Item model number | EM56IY |
| Manufacturer | maXpeedingrods |
| Part Number | EM56IY |
| Model | 4" Lift Kit for Jeep JKU |
| Dimensions | 28.19 x 19.96 x 14.88 inches |
Listed on Amazon as: maXpeedingrods 4" Suspension Lift Kit for 2007-2018 Jeep Wrangler JK Unlimited JK 4Door
View on Amazon
#8
8. Traxda 102040
- Material: Carbon Steel
- Material Type: Carbon Steel
Best for: Stock-ride bolt-in seekers.
Why it ranks #8: The listing says front-and-rear lift and stock ride quality, but gives no lift height or vehicle fitment to verify a 4-inch match.
A direct bolt-in installation and a claim of maintained stock ride quality define the Traxda 102040 listing. The description also says aftermarket shocks are not required, a useful distinction for buyers who want a lift kit without planning a separate shock purchase. The supplied information does not identify a vehicle application or lift height.
Traxda names carbon steel as the kit material and lists shocks among the included components, while its description says aftermarket shocks are not required. Together, those details give buyers a clearer sense of the stated package and its intended installation approach. The direct bolt-in claim suggests the listed setup does not call for a described cutting process, but the listing provides no vehicle fitment or lift measurement, so those details cannot be assessed from the supplied information.
- Direct bolt-in installation stated
- Description says stock ride quality is maintained
- Aftermarket shocks are not required, per description
- Shocks listed among included components
- The supplied listing does not specify vehicle fitment or lift height.
Skip it if you need a stated vehicle application and lift measurement; ReadyLIFT 69-1040 specifies both for listed Ram 1500 4WD trucks.
This may suit a buyer evaluating a direct bolt-in kit that claims stock ride quality without requiring aftermarket shocks. The supplied listing omits vehicle fitment and lift height, so those are essential unresolved boundaries for selection.
Full product details
| Brand | Traxda |
|---|---|
| Included Components | shocks |
| Manufacturer | Traxda LLC |
| Part Number | 102040 |
| Material | Carbon Steel |
| Model Number | 102040 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: 102040 Front and Rear Lift Kit
View on Amazon
#9
9. Pro Comp 51028B1
- Weight: 69 lb
- Material: Metal
- Material Type: Metal
Best for: Buyers verifying fitment first.
Why it ranks #9: Its listing identifies a lift kit but provides no lift height, vehicle application, or useful fitment details for confirming a 4-inch match.
The Pro Comp 51028B1 listing identifies a metal lift kit and gives its package weight as 69 pounds, but it provides no lift height or vehicle application in the supplied details. That makes it most useful to buyers who already have product-specific fitment information and can verify the intended setup before proceeding.
Pro Comp names metal as the material and identifies the item as a lift kit, while the specifications provide a 69-pound item weight. Those facts establish the product category and a handling consideration for receiving or moving the package, but they do not establish a lift measurement, included suspension components, or compatible vehicle. The available listing is therefore too limited to connect this kit to a particular stance, tire size, installation workflow, or vehicle without adding unsupported assumptions.
- Identified as a lift kit
- Metal listed as the material
- Item weight specified as 69 pounds
- Pro Comp is the named brand
- The supplied details do not state lift height, fitment, or included components.
Skip it if you need a stated 4-inch lift for a specific vehicle; Rough Country 73530 lists a 4-inch lift for 1964–1980 Land Cruiser 4WD.
This is only a reasonable candidate for buyers who can independently establish the intended vehicle and lift specifications from product-specific information. The supplied details do not identify fitment, lift height, or kit contents, limiting confident selection.
Full product details
| Brand | PRO COMP |
|---|---|
| Item Weight | 69 pounds |
| Manufacturer | Pro Comp |
| Part Number | 51028B-1 |
| Material | Metal |
| Model Number | 51028B1 |
Listed on Amazon as: Pro Comp 51028B1 Lift Kit
View on Amazon
#10
10. ReadyLIFT 69-2740
- Weight: 79 lb
- Material: Steel
- Material Type: Steel
Best for: Single-rear-wheel Super Duty owners.
Why it ranks #10: This Super Duty kit lifts 2.5 inches in front and 2 inches in the rear, so it does not match the 4-inch target.
A 2.5-inch front lift paired with a 2-inch rear lift defines this ReadyLIFT kit for 2017–2020 single-rear-wheel Super Duty trucks. Its stated 35-inch maximum tire diameter gives buyers a tire-planning boundary, while coil-spring spacers and fabricated rear blocks identify key parts of the installation package.
ReadyLIFT specifies 2.5-inch front coil-spring spacers with sound isolators and fabricated steel rear lift blocks with longer U-bolts, linking the front and rear lift to distinct hardware. A CNC-machined billet carrier is also included. The listing gives wheel-specific tire examples, including 315/70R18 and 295/65R20, and states a maximum 35-inch tire diameter. It is specifically for single-rear-wheel trucks with a one-piece driveshaft, rather than a general Super Duty application.
- 2.5-inch front and 2-inch rear lift
- Listed for 2017–2020 single-rear-wheel Super Duty
- Includes coil-spring spacers and fabricated rear lift blocks
- Provides wheel-specific tire examples up to 35 inches
- Shocks are not included, as stated in the title.
Skip it if you need a 4-inch lift for a classic Land Cruiser; Rough Country 73530 is listed for 1964–1980 Land Cruiser 4WD.
Consider it for owners of the listed single-rear-wheel Super Duty who want a modest front-and-rear lift with tire-size guidance. Its 35-inch maximum and one-piece driveshaft application are important fit boundaries.
Full product details
| Brand | Readylift |
|---|---|
| Included Components | 2.5'' SST Lift Kit with 4'' Rear Tapered Blocks for 1 Piece Drive Shaft without Shocks See more |
| Item Weight | 79 pounds |
| Manufacturer | ReadyLift |
| Part Number | 69-2740 |
| Manufacturer Warranty Description | Limited Lifetime |
| Material | Steel |
| Model Number | 69-2740 |
Listed on Amazon as: ReadyLift 69-2740 2.5'' SST Lift Kit with 4'' Rear Tapered Blocks for 1 Piece Drive Shaft without Shocks
View on AmazonWhy “4-inch” does not guarantee fitment
A 4-inch label does not mean a kit fits every vehicle or raises every axle by the same amount. ReadyLIFT 69-39400 specifies 4 inches at the front and 3 inches at the rear, while the Ram kits from ReadyLIFT list 4 inches front and 2 inches rear. That difference changes the finished stance, so compare the stated front and rear figures rather than relying on the headline height.
Fitment details can be just as decisive: ReadyLIFT 69-39400 excludes Trail Boss and AT4, and the Ram 69-1040 excludes factory air suspension. The maXpeedingrods Jeep JKU listing flags possible exhaust work, a smaller aftermarket front driveshaft, and wheel spacers depending on configuration.
Treat each note as a compatibility check, not an optional afterthought. Verify your exact vehicle and suspension against the manufacturer’s application information before ordering or installing.
Lift height and tire clearance are separate checks
A 4-inch lift does not by itself establish that a particular tire will clear without rubbing. ReadyLIFT 69-39400 provides specific tire-and-wheel guidance for Silverado and Sierra applications, and ReadyLIFT 69-1040 states that it allows up to 35×12.50-inch tires. Those details are more useful than assuming every kit at the same lift height supports the same tire.
The Super Duty ReadyLIFT 69-2740 lists a 35-inch maximum tire diameter, but it is a 2.5-inch front-lift kit rather than a 4-inch option. Also check wheel width and offset where the listing specifies them: the 69-39400 gives 20×9-inch and zero-offset combinations, while the 69-2740 gives a no-rub combination for a 9-inch wheel with +25 offset.
Confirm the exact vehicle configuration and wheel setup before selecting tires.
How to Choose a 4-Inch Lift Kit
Vehicle and drivetrain fitment
Look first for an exact match to your vehicle year, model, body style, and drivetrain. The options here range from 2019–2023 Silverado and Sierra 1500 fitment to 2009–2018 Ram 1500 2WD, 2009–2017 Ram 1500 4WD, 1982–1986 Jeep CJ, and 1964–1980 Land Cruiser. Some listings add exclusions: ReadyLIFT 69-39400 excludes Trail Boss and AT4, and ReadyLIFT 69-1040 is not for factory air suspension.
A clearly identified match should take priority over a kit whose listing omits its application. Choose the narrowest, verified fitment for your vehicle; if your trim, drivetrain, or suspension differs, confirm compatibility with the manufacturer before buying.
Front and rear lift amounts
Compare the stated front and rear lift separately, because the two figures can differ. ReadyLIFT 69-39400 raises the front 4 inches and rear 3 inches; both Ram ReadyLIFT kits specify 4 inches front and 2 inches rear. The ReadyLIFT Super Duty 69-2740 is a different setup at 2.5 inches front and 2 inches rear, despite its 4-inch rear blocks.
Some listings, including Traxda 102040, do not provide a lift height in the supplied details. Buyers seeking a level-looking stance should compare the axle measurements and intended vehicle setup rather than choosing by the largest number in a title.
If your goal is specifically a 4-inch lift, prioritize listings that state the lift amount clearly.
Included components and installation notes
Check what the kit actually includes and whether the listing identifies installation constraints. ReadyLIFT 69-1041 includes Bilstein 5100 rear shocks, while Rough Country 30730 lists N3 shocks and components such as lifted knuckles and brake-line brackets. BDS’s CJ kit lists front and rear springs, shocks, and a transfer-case lowering kit; its features describe bolt-on installation.
By contrast, the Jeep JKU listing notes that some configurations may need exhaust modifications, a different front driveshaft, or wheel spacers. Buyers wanting a more completely specified package should compare the included-parts list with their needs.
Those comfortable arranging additional work can consider a kit with stated caveats, but should resolve fitment and installation requirements before purchase.
Which 4-Inch Lift Kit Should You Choose?
Choose ReadyLIFT 69-39400 if you have a compatible Silverado or Sierra 1500 and want clearly stated 4-inch front, 3-inch rear lift plus tire guidance. Ram 1500 4WD owners should compare ReadyLIFT 69-1041, which includes Bilstein rear shocks, with ReadyLIFT 69-1040, which lists tubular upper control arms and a 35×12.50-inch tire allowance. For a 2WD Ram, Rough Country 30730 is the application-specific option.
Jeep CJ owners can consider BDS 4-Inch CJ Kit, while Land Cruiser owners should look at Rough Country The maXpeedingrods Jeep JKU Kit calls for careful review of its modification notes.
Avoid treating Traxda 102040 or Pro Comp 51028B1 as confirmed 4-inch matches without verified fitment and lift details; the Super Duty ReadyLIFT is a 2.5-inch-front alternative.
Related Buying Guides
- Best 4 Inch Lift Kit
- Best 3 Inch Lift Kit
- Best 6 Inch Lift Kit
- Best 8 Inch Lift Kit
- Best 7 Inch Lift Kit
- Best Rated Lift Kits
Frequently Asked Questions
Will a 4-inch lift kit affect my truck’s alignment or suspension wear?
Yes. A 4-inch lift changes suspension geometry, so alignment should be checked after installation; otherwise steering and tire wear may suffer. The specific effect depends on the vehicle and kit.
Confirm the kit matches your trim and suspension, and ask the installer whether any additional suspension components or follow-up checks are needed.
Do I need to recalibrate speedometer or driver-assistance systems after lifting my vehicle?
Possibly, especially if the lift is paired with a change in tire size. Requirements vary by vehicle and equipment, and the supplied listings do not establish one rule for every application. Check your owner’s information or ask a qualified installer whether speedometer or driver-assistance calibration is needed for your exact setup.
What tire size can I run without rubbing after installing a 4-inch lift?
There is no single tire size that fits every vehicle and wheel setup without rubbing. The ReadyLIFT 69-39400 listing provides tire guidance for its specified Silverado and Sierra applications; use that guidance only after confirming your trim and suspension. For other kits, verify tire fitment with the manufacturer or installer before choosing tires.
How can I confirm that a lift kit fits my vehicle?
Match the listing to your exact year, make, model, drivetrain, trim, and suspension configuration before ordering. For example, ReadyLIFT 69-39400 excludes Trail Boss and AT4 models, while the Ram options differ by drivetrain and included components. If a listing leaves fitment or lift details unclear, seek confirmation rather than assuming compatibility.
Should I check installation requirements before choosing a kit?
Yes. Review the kit’s installation notes and confirm whether it requires cutting, modifications, or other work on your vehicle. The ReadyLIFT 69-39400 listing says installation needs no cutting or modifications, while the maXpeedingrods Jeep JKU kit calls for careful review of its modification notes.
Ask an installer about any unclear requirements.
Final Words
Choose by vehicle fitment first, then compare the lift details and included components. For a compatible 2019–2023 Silverado or Sierra 1500, ReadyLIFT 69-39400 is the strongest overall option, but it excludes Trail Boss and AT4. Ram 1500 4WD owners can compare the two ReadyLIFT kits; 2WD owners should consider Rough Country 30730.
Verify trim, suspension, tire guidance, and installation notes before ordering.



