Best Intake For Ls1: Compare Cathedral-Port Manifolds

Best Intake For Ls1

A strong LS1 intake should match cathedral-port heads and your throttle-body setup, with airflow capacity suited to the engine’s intended use. The FAST LSXr 102mm is a compelling choice for LS1, LS2, and LS6 builds because its product details specify longer runners, a larger-than-stock inlet, and compatibility with several throttle-body sizes. This roundup also includes cast and fabricated high-flow manifolds, lower-profile racing designs, and a cold-air intake for LS swaps.

Those products serve different installation and performance goals, so fitment labels alone are not enough to choose. Check the head-port shape, cable or electronic throttle arrangement, inlet diameter, fuel-rail requirements, and clearance before ordering.

The rankings weigh LS1 relevance first, then listed specifications and included components, while distinguishing general street-oriented options from explicitly high-RPM designs.

FAST LSXr 102mm is the leading pick for most LS1 shoppers in this selection. Its listing expressly names LS1, LS2, and LS6, and describes longer runners, a larger air inlet than stock, and a removable runner design. The 102mm opening suits a matching large throttle body, while the listing also notes use with OEM or aftermarket 90mm and 92mm throttle bodies.

Confirm your cathedral-port head and throttle setup before purchase; the other ranked options may better suit builds needing included fuel rails or a particular high-RPM design.

Our Top Picks

FAST LSXr 102mmBest Overall

FAST LSXr 102mm

It explicitly fits LS1, LS2, and LS6, pairs longer runners with a 102mm inlet, and lists compatibility with 90mm and 92mm throttle bodies.

View on Amazon
BTR Trinity IntakeIncluded Rail Kit

BTR Trinity Intake

It fits cathedral-port LS1, LS2, and LS6 heads and includes the specified FRK-02 fuel rail kit in its short-runner, three-piece design.

View on Amazon
BTR Equalizer 1High-RPM Design

BTR Equalizer 1

This cathedral-port manifold includes a billet fuel rail kit and lists an ideal operating range of 6,000–8,000-plus rpm for sub-four-inch-stroke applications.

View on Amazon

Compare Intake Options by Fitment and Included Features

#ProductPackage DimensionsWeightBuy
1
FAST LSXr 102mm1. FAST LSXr 102mmBest Overall
—19.45 lbView on Amazon
2
BTR Trinity Intake2. BTR Trinity IntakeIncluded Rail Kit
——View on Amazon
3
BTR Equalizer 13. BTR Equalizer 1High-RPM Design
——View on Amazon
4
GSTP 92mm Manifold4. GSTP 92mm ManifoldInjector Flexibility
21.4 x 15.5 x 11 in17.51 lbView on Amazon
5
Htostar 92mm Manifold5. Htostar 92mm ManifoldCable-Throttle Cathedral-Port Builds
23.5 x 23.5 x 15.5 in20.7 lbView on Amazon
6
POSENG 92mm Manifold6. POSENG 92mm ManifoldCable-Drive LS Replacement
23.5 x 15.5 x 11 in20.5 lbView on Amazon
7
PUZZLEDEER 102mm Manifold7. PUZZLEDEER 102mm Manifold102mm Cathedral-Port Manifold
—17.31 lbView on Amazon
8
DEEPMOTOR Cast Manifold8. DEEPMOTOR Cast ManifoldBoost-Ready Construction
24.94 x 16.43 x 13.04 in30.2 lbView on Amazon
9
DEEPMOTOR High-Ram9. DEEPMOTOR High-RamHigh-RPM Sheet-Metal LS Builds
24.6 x 15.7 x 12.6 in22.7 lbView on Amazon
10
RiAiCiING Swap Intake10. RiAiCiING Swap IntakeFlexible LS Swap Intake Routing
——View on Amazon

Detailed Reviews: Best Intake For Ls1

FAST LSXr 102mm

#1 · Best Overall

1. FAST LSXr 102mm

  • Weight: 19.45 lb

Best for: Polymer 102mm Street Builds.

Why it ranks #1: It explicitly fits LS1, LS2, and LS6, pairs longer runners with a 102mm inlet, and lists compatibility with 90mm and 92mm throttle bodies.

FAST’s 102mm inlet and longer, less restrictive runners distinguish this LSXr manifold, pairing a large throttle-body opening with a runner design intended to add power while retaining low-RPM torque. Its polymer construction also makes it lighter than aluminum and helps it run cooler than an aluminum manifold.

The removable, modular runner design lets the manifold come apart for porting, giving builders a serviceable path for airflow work rather than a one-piece assembly. Its 102mm inlet is matched to FAST’s Big Mouth 102mm throttle body, while the listing also supports OEM or aftermarket 90mm and 92mm throttle bodies. The advanced polymer material is lighter than aluminum and runs cooler, and the stated C.A.R.B. approval is relevant for buyers checking emissions requirements.

Pros
  • 102mm inlet suits large throttle-body setups
  • Longer runners are intended to add power while maintaining low-RPM torque
  • Removable runners allow disassembly and porting
  • Polymer construction is lighter than aluminum and runs cooler
Cons
  • The 102mm inlet is larger than the listed OEM and 90mm/92mm throttle-body options.

Skip it if you need a 92mm inlet as your only sizing target; Htostar Racing’s 92mm LS manifold matches that opening.

This fits cathedral-port LS1, LS2, or LS6 builders who want removable runners for porting and a 102mm inlet, with 90mm and 92mm throttle-body use also listed. Check inlet sizing against the intended throttle body.

Full product details
BrandFAST
Item Weight‎19.45 pounds
Item model number‎146302B
Manufacturer‎Fast
Part Number‎146302B
Model‎146302B
Dimensions‎28.1 x 16.4 x 10.1 inches
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov Proposition 65 Warning for California Consumers WARNING: Cancer – www.P65Warnings.ca.gov

Listed on Amazon as: FAST LSXr 102mm Intake Manifold for LS1, LS2, and LS6 (146302B), black

View on Amazon
BTR Trinity Intake

#2 · Included Rail Kit

2. BTR Trinity Intake

Best for: Short-Runner High-RPM LS Builds.

Why it ranks #2: It fits cathedral-port LS1, LS2, and LS6 heads and includes the specified FRK-02 fuel rail kit in its short-runner, three-piece design.

BTR’s Trinity uses a short-runner, three-piece design with a stated 6,000–8,500 rpm operating range, giving cathedral-port LS builders a high-rpm intake with application flexibility. This package includes the required new-style FRK-02 fuel-rail kit and lists compatibility across several LS-family engines.

The three-piece construction allows greater application flexibility than a single-piece layout, while the short runners align with the stated 6,000–8,500 rpm operating range. Its high-quality cast-aluminum manifold is supplied with the FRK-02 fuel-rail kit identified as required, keeping that rail component in the package. The listed fitment covers 1997–2013 cathedral-port LS-based heads and names LS1, LS2, LS6, LQ4, LQ9, L33, and LH6 engines.

Pros
  • Short-runner, three-piece design
  • Stated 6,000–8,500 rpm operating range
  • Includes the required FRK-02 fuel-rail kit
  • Listed for multiple cathedral-port LS engine families
Cons
  • Its specified 6,000–8,500 rpm operating range is aimed at high-rpm combinations.

Skip it if you need an intake specified for sub-four-inch-stroke applications; BTR Equalizer 1 lists that specific operating context.

This is for a cathedral-port LS build intended to operate in the listed 6,000–8,500 rpm range and benefit from a short-runner layout. Check engine-family fitment and account for the supplied FRK-02 rail kit.

Full product details
BrandMichigan Motorsports
Item model number‎TRA-1-BLK-P105+FRK-02
Manufacturer‎BTR Brian Tooley Racing
Part Number‎TRA-1-BLK-P105+FRK-02
Model‎BTR Trinity Cathedral Port LS1 Intake Manifold

Listed on Amazon as: BTR Trinity Cathedral Port LS1 Intake Manifold w/Fuel Rails, Black Finish Brian Tooley Racing LS1 LS2 LS6 LQ4 LQ9 L33

View on Amazon
BTR Equalizer 1

#3 · High-RPM Design

3. BTR Equalizer 1

Best for: High-RPM Low-Profile Builds.

Why it ranks #3: This cathedral-port manifold includes a billet fuel rail kit and lists an ideal operating range of 6,000–8,000-plus rpm for sub-four-inch-stroke applications.

BTR’s Equalizer 1 combines an underslung plenum for maximum hood clearance with a stated 6,000–8,000-plus rpm operating range for sub-four-inch-stroke applications. The cathedral-port intake includes a billet fuel-rail kit, making it a particularly specified option for builders balancing engine-bay clearance with a high-rpm plan.

The underslung plenum addresses hood clearance, which can help when packaging a performance intake beneath a limited-height engine bay. Its 102mm profiled throttle-body opening gives the builder a defined inlet size, while the included fuel-rail kit keeps rails within the supplied package. O-ringed port openings and lid surface support sealing at the manifold interfaces, and the steep-chamfer injector bores are specified to ease injector O-ring insertion during assembly.

Pros
  • Underslung plenum is specified for maximum hood clearance
  • Includes billet fuel-rail kit
  • 102mm profiled throttle-body opening
  • O-ringed openings and chamfered injector bores support assembly and sealing
Cons
  • Its stated 6,000–8,000-plus rpm range targets sub-four-inch-stroke applications.

Skip it if you need a short-runner 6,000–8,500 rpm manifold; BTR Trinity lists that operating range and a three-piece design.

This fits a cathedral-port build with a sub-four-inch stroke, high-rpm operating plan, and hood-clearance constraint. The 102mm opening and included rails should suit the rest of the induction and fuel-system choices.

Full product details
BrandBTR Brian Tooley Racing
Item model number‎IMA-01
Manufacturer‎BTR Brian Tooley Racing
Part Number‎IMA-01
Model‎Equalizer 1 LS Intake Manifold

Listed on Amazon as: BTR Equalizer 1 Intake Manifold Cathedral Head Brian Tooley IMA-01 LS1 LS2 LS6 4.8 5.3 5.7 6.0 Includes Billet Fuel Rail Kit(Intake and Fuel Rails)

View on Amazon
GSTP 92mm Manifold

#4 · Injector Flexibility

4. GSTP 92mm Manifold

  • Package Dimensions: 21.4 x 15.5 x 11 in
  • Weight: 17.51 lb

Best for: Cathedral-Port Rail Compatibility.

Why it ranks #4: Its cathedral-port compatibility includes LS1, LS2, and LS6, with a 92mm inlet and an upgraded rail bracket for original LS1, LS2, or LS6 injectors.

An upgraded fuel-rail bracket that accepts LS1, LS2, and LS6 original injectors without extra spacers or modifications is the defining detail of this GSTP intake. The 92mm inlet and cathedral-port fitment target LS-based Gen III/IV EFI engines, with vacuum and MAP ports included.

The 1/8-inch-thick T6061 aluminum body and 210mm height give builders specific construction and clearance dimensions to account for during installation. Its 8AN fuel-rail fittings pair with the upgraded bracket, which is listed to accept original LS1, LS2, or LS6 injectors without added spacers or modifications. The 1/4NPT and 1/8NPT vacuum ports include plugs, and a rear M12 x 1.25 MAP port provides a specified sensor connection point.

Pros
  • 92mm inlet for cathedral-port LS applications
  • T6061 aluminum is 1/8 inch thick
  • Bracket accepts LS1, LS2, and LS6 original injectors without spacers or modifications
  • Includes 8AN rail fittings, vacuum ports, and a rear MAP port
Cons
  • The 210mm-tall manifold requires accounting for engine-bay clearance.

Skip it if you have limited hood clearance; BTR Equalizer 1 is listed with an underslung plenum for maximum hood clearance.

This suits cathedral-port LS builders using original LS1, LS2, or LS6 injectors who want the listed rail bracket and sensor ports. Check the 210mm height and fuel-rail connection plan against the vehicle.

Full product details
BrandGSTP
Item Weight‎17.51 pounds
Item model number‎IM-1011B-S-RS
Manufacturer‎GSTP
Part Number‎IM-1011B-S-RS
Model‎Intake Manifold
Package Dimensions‎21.4 x 15.5 x 11 inches

Listed on Amazon as: For LS LS1 LS2 LS6 Intake Manifold with Cathedral Port Compatible with Chevy 4.8 5.3 5.7 6.0 L (92MM Silver)

View on Amazon
Htostar 92mm Manifold

#5

5. Htostar 92mm Manifold

  • Package Dimensions: 23.5 x 23.5 x 15.5 in
  • Weight: 20.7 lb

Best for: Cable-Throttle Cathedral-Port Builds.

Why it ranks #5: It specifies LS1, LS2, and LS6 cathedral-port compatibility, a 92mm inlet, and drive-by-cable throttle fitment, but lists fewer included fuel-system details.

A 92mm inlet paired with a taller 210mm manifold gives this Htostar Racing intake a clear fit for cable-throttle LS projects seeking a larger opening. Its listed compatibility covers 4.8L, 5.3L, LS1, LS2, and LS6 engines with cathedral-port heads, plus several named GM applications.

The 1/8-inch-thick aluminum construction provides a substantial manifold body, while the 1/4NPT and 1/8NPT vacuum ports with plugs give installers connection options for vacuum plumbing. The 92mm inlet identifies the throttle-body opening to plan around, and the 210mm height is a practical clearance consideration in the engine bay. Its stated cathedral-port compatibility includes several LS families and named Chevrolet, Cadillac, Pontiac, and Saab models, but this listing specifies drive-by-cable throttle bodies.

Pros
  • 92mm inlet for a larger throttle-body opening
  • Taller 210mm manifold height is specified
  • Aluminum construction is 1/8 inch thick
  • Includes 1/4NPT and 1/8NPT vacuum ports with plugs
Cons
  • Specified for drive-by-cable throttle bodies, not a listed drive-by-wire setup.

Skip it if you need a drive-by-wire manifold; this listing specifies a drive-by-cable throttle body.

This suits a cable-throttle LS1, LS2, or LS6 build with cathedral-port heads where a 92mm inlet and plugged vacuum ports fit the plan. Account for its 210mm height and verify the intended engine configuration.

Full product details
BrandHtostar Racing
Item Weight‎20.7 pounds
Item model number‎intake manifolds
Manufacturer‎Htostar Racing
Part Number‎IM-1011A-S-JL
Model‎IM-1011A-S-JL
Package Dimensions‎23.5 x 23.5 x 15.5 inches

Listed on Amazon as: For LS Intake Manifold Compatible with LS1 LS2 LS6 of cathedral port heads with Drive by Cable Throttle Body Compatible with Chevy Cadillac Pontiac Aluminum (92mm)

View on Amazon
POSENG 92mm Manifold

#6

6. POSENG 92mm Manifold

  • Package Dimensions: 23.5 x 15.5 x 11 in
  • Weight: 20.5 lb

Best for: Cable-Drive LS Replacement.

Why it ranks #6: It names LS1 and cathedral-port heads and specifies a four-bolt cable-drive application; injector bracket changes or spacers may be needed for other injectors.

Explicit cable-drive-only fitment is the key boundary for this POSENG 92mm intake: it is listed for cathedral-port LS engines, but not drive-by-wire setups. Its stated applications include 4.8L, 5.3L, 5.7L, and 6.0L engines alongside LS1, LS2, and LS6 configurations.

The 92mm throttle-body sizing gives cable-throttle builders a defined opening to match, and the listed cathedral-port compatibility covers Chevrolet Small Block V8 Gen III/IV LS-based engines. The listing calls out LS1 and LS6 injectors; other injectors may require mounting-bracket modification, such as drilling extra holes, or spacers. It also notes that additional modifications may be required, so this is a more involved fitment decision than a straightforward injector-and-throttle-body match.

Pros
  • 92mm throttle-body sizing
  • Listed for cathedral-port Gen III/IV LS-based engines
  • Covers LS1, LS2, LS6, and several displacement options
  • LS1/LS6 injector compatibility is specifically identified
Cons
  • Drive-by-wire throttle bodies are explicitly excluded.

Skip it if you run drive-by-wire; GSTP’s 92mm cathedral-port manifold lists LS-based EFI fitment without this cable-only restriction.

This is for a cable-drive LS build using cathedral-port heads and a 92mm throttle-body setup. LS1 or LS6 injectors are the straightforward listed match; other injectors can call for bracket changes or spacers.

Full product details
BrandPOSENG
Item Weight‎20.5 pounds
Item model number‎IM-1001A-BK-CS
Manufacturer‎POSENG
Part Number‎IM-1001A-BK-CS
Package Dimensions‎23.5 x 15.5 x 11 inches

Listed on Amazon as: For LS LS1 LS2 LS6 Intake Manifold Compatible with Chevy 4.8 5.3 6.0 6.2 with 92mm Throttle Body Kits HTRACING

View on Amazon
PUZZLEDEER 102mm Manifold

#7

7. PUZZLEDEER 102mm Manifold

  • Weight: 17.31 lb

Best for: 102mm Cathedral-Port Manifold.

Why it ranks #7: The listing covers LS1 and cathedral-port heads with a 102mm opening, though the supplied details provide less specific information about rails and throttle arrangements.

A 102mm opening is the defining specification of this PUZZLEDEER intake, giving cathedral-port LS builders a large throttle-body interface to plan around. The listing names LS1, LS2, LS3, and LS6 among its applications and describes the manifold’s role in distributing incoming air to the engine’s cylinders.

The listed 102mm size helps establish throttle-body sizing for the installation, while the stated cathedral-port fitment narrows the cylinder-head application. PUZZLEDEER identifies several Chevrolet applications in its fitment information, including Corvette and Firebird/Trans AM families. As an upper intake manifold, its stated role is to distribute air to the cylinders; buyers should therefore evaluate it as part of the full intake assembly and match the port and engine configuration before planning installation.

Pros
  • 102mm throttle-body opening
  • Listed for cathedral-port LS heads
  • Names LS1, LS2, LS3, and LS6 applications
  • Identifies air distribution to the engine’s cylinders as its manifold role
Cons
  • Its stated application is limited to cathedral-port heads.

Skip it if you have non-cathedral-port heads; BTR Trinity is also listed for cathedral-port LS heads, so it does not resolve that mismatch.

This suits a cathedral-port LS builder seeking a 102mm intake opening and an upper manifold that distributes air across the cylinders. Its port-style boundary makes head configuration the key fit consideration.

Full product details
BrandPUZZLEDEER
Item Weight‎17.31 pounds
Item model number‎CM-IM-1012-BK
Manufacturer‎PUZZLEDEER
Part Number‎CM-IM-1011-BK
Model‎Intake Manifold
Dimensions‎23.23 x 13.78 x 10.24 inches

Listed on Amazon as: LS LS1 LS2 LS3 LS6 Intake Manifold Compatible for Chevy 4.8L 5.3L 5.7L 6.0L Intake Manifold for LS Cathedral Port Heads 102mm Black

View on Amazon
DEEPMOTOR Cast Manifold

#8 · Boost-Ready Construction

8. DEEPMOTOR Cast Manifold

  • Package Dimensions: 24.94 x 16.43 x 13.04 in
  • Weight: 30.2 lb

Best for: Stroker And Boost Builds.

Why it ranks #8: This LS1/LS2/LS6 manifold accepts up to a 102mm throttle body and includes fuel rails, with the listing describing boosted and nitrous applications.

A cast-aluminum manifold with a 102mm throttle-body opening and included -8 AN fuel rails targets larger LS combinations. DEEPMOTOR identifies it for 400-plus-cubic-inch stroker engines and aggressive heads-and-cam packages, while its listed applications span naturally aspirated, nitrous, and remote-intercooled boost setups.

The bolt-in cast-aluminum runners and plenum provide the core manifold assembly, while the included -8 AN fuel rails address fuel-system integration in the same package. A billet CNC plenum volume cap and individual 1/8-inch or 1/16-inch NPT nitrous/methanol injection ports support builds using those systems. The 102mm opening accommodates a large throttle-body setup, and the listing states more than 300 psi boost handling; buyers should match the manifold to their engine and induction plan.

Pros
  • 102mm throttle-body opening
  • Includes -8 AN fuel rails
  • Individual 1/8-inch or 1/16-inch NPT nitrous/methanol ports
  • Listed for naturally aspirated, nitrous, and remote-intercooled boost applications
Cons
  • The listed 400-plus-cubic-inch stroker and aggressive heads/cam focus may not suit a mild street build.

Skip it if you are assembling a mild stock-style street engine; FAST LSXr’s longer runners are listed to maintain low-RPM torque.

This is aimed at a high-output LS build using a 400-plus-cubic-inch stroker, aggressive heads and cam, or a listed nitrous or boost setup. Its 102mm opening and fuel-rail arrangement make component planning essential.

Full product details
BrandDEEPMOTOR
Item Weight‎30.2 pounds
Item model number‎DM-3711
Manufacturer‎DEEPMOTOR
Part Number‎DM-3711
Model‎DM-3711
Package Dimensions‎24.94 x 16.43 x 13.04 inches

Listed on Amazon as: LS1/LS2/LS6 102mm Casting Bolted Intake Manifold with fuel rail (Black)

View on Amazon
DEEPMOTOR High-Ram

#9

9. DEEPMOTOR High-Ram

  • Package Dimensions: 24.6 x 15.7 x 12.6 in
  • Weight: 22.7 lb

Best for: High-RPM Sheet-Metal LS Builds.

Why it ranks #9: Its 9.65L plenum and 102mm opening target high-RPM, high-horsepower LS applications, but the listing gives less detail on LS1 head-port fitment.

A 9.65-liter plenum paired with a 102mm throttle-body opening makes this DEEPMOTOR high-ram intake an explicitly airflow-focused choice for high-horsepower LS builds. Its sheet-metal style and TIG-welded 3mm T6061 aluminum construction distinguish it from the listed cast-manifold options.

The large plenum is specified to support airflow at high rpm, while the 102mm opening gives builders a clear throttle-body size for matching the induction system. TIG-welded 3mm T6061 aluminum construction supplies the fabricated sheet-metal-style assembly, and the included fuel rails support fuel-system integration. The product description emphasizes top-end performance and high-horsepower applications, so its stated focus is better suited to race-oriented planning than to a low-rpm priority.

Pros
  • Large 9.65-liter plenum
  • 102mm high-flow throttle-body opening
  • TIG-welded 3mm T6061 aluminum construction
  • Fuel rails are included
Cons
  • Its large plenum is explicitly aimed at high-rpm, high-horsepower applications.

Skip it if you prioritize low-rpm torque; FAST LSXr lists longer runners intended to maintain low-RPM torque.

This suits a high-horsepower LS build seeking a 102mm opening, large plenum, and fabricated aluminum construction. Its stated high-rpm emphasis is the key boundary for street combinations centered on lower-rpm operation.

Full product details
BrandDEEPMOTOR
Item Weight‎22.7 pounds
Item model number‎DM-3032
Manufacturer‎DEEPMOTOR
Part Number‎DM-3032
Model‎DM-3032
Package Dimensions‎24.6 x 15.7 x 12.6 inches

Listed on Amazon as: LS1 LS2 LS6 102mm High-Ram EFI Intake Manifold – Sheet Metal Style Race Intake w/Fuel Rails & Large Plenum

View on Amazon
RiAiCiING Swap Intake

#10

10. RiAiCiING Swap Intake

Best for: Flexible LS Swap Intake Routing.

Why it ranks #10: This is a cold-air intake for LS swaps rather than an intake manifold; its universal design lists LS1 compatibility but does not specify cathedral-port manifold fitment.

Driver- or passenger-side filter positioning gives this RiAiCiING cold-air intake useful routing flexibility for LS swaps. The kit is listed for many LS-family engines and aims to provide clearance between the radiator and accessory pulleys, a practical consideration when packaging an intake in a converted vehicle.

Its universal design is listed for LS1, LS2, LS3, LQ4, LQ9, LY6, and 4.8L through 6.0L engines, making it relevant to varied swap combinations. Choosing driver- or passenger-side filter position lets the installer orient the intake around the available engine-bay space. The system supports speed-density operation as well as round MAF sensors; for MAF use, the listing specifically calls for additional couplers and clamps, so those pieces need to be planned into installation.

Pros
  • Listed for multiple LS and related engine families
  • Filter can be positioned on the driver or passenger side
  • Designed to provide radiator and accessory-pulley clearance
  • Supports speed density and round MAF sensors
Cons
  • Round MAF installation requires additional couplers and clamps.

Skip it if you need a complete MAF coupler-and-clamp set included; this listing says those parts are additional.

This is for an LS swap where filter placement and radiator-to-pulley clearance shape the intake route. It supports speed density or round MAF use, but MAF buyers must source the additional couplers and clamps.

Full product details
BrandRiAiCiING
Included ComponentsLS Swap Cold Air Intake Kit
ManufacturerRiAiCiING
Part NumberAIM028-RD-BK
Manufacturer Warranty Description1 year
Model NumberAIM028-RD-BK

Listed on Amazon as: 4'' LS Swap Cold Air Intake for LS1 LS2 LSX Camaro Chevelle

View on Amazon

Avoiding LS1 intake fitment mismatches

The main fitment trap is treating an LS1 label as proof that every intake will bolt onto every LS1 configuration. Several manifolds specify cathedral-port heads, but throttle actuation differs: Htostar lists drive-by-cable compatibility, and POSENG explicitly says four-bolt cable drive only, not drive-by-wire. A manifold can therefore match the engine family and still fail to match the installed throttle system.

Check the cylinder-head port shape, throttle-body bolt pattern and drive type, and available clearance against the exact product details. Also note that POSENG says injectors other than LS1/LS6 may require bracket changes or spacers.

GSTP, by contrast, describes a fuel-rail bracket intended for original LS1, LS2, or LS6 injectors without additional spacers or modifications. These details make injector and rail fitment a separate check, not something to assume from the manifold’s engine list.

Why larger openings are not a universal upgrade

A larger throttle-body opening matters only when the rest of the setup can use it and the manifold suits the engine’s operating goals. The products span 92mm options from Htostar and GSTP to 102mm choices such as FAST LSXr and the DEEPMOTOR designs. FAST specifically says its 102mm inlet can also be used with OEM or aftermarket 90mm and 92mm throttle bodies, but that claim should not be generalized to every manifold here.

The BTR Equalizer 1 lists a 6,000–8,000-plus rpm ideal operating range for sub-four-inch-stroke applications, while BTR Trinity lists 6,000–8,500 rpm. Those stated ranges point to different priorities than a simple bolt-on replacement.

Consider the throttle body, engine combination, clearance, and intended operating range together; choosing by inlet diameter alone can leave an otherwise suitable LS1 build with an intake mismatched to its components.

How to Choose an LS1 Intake Manifold

Head ports and throttle actuation

Look for explicit cathedral-port fitment and a throttle arrangement that matches your hardware. Htostar names LS1, LS2, and LS6 cathedral-port heads and drive-by-cable fitment; POSENG specifies four-bolt cable drive only and says it is not for drive-by-wire. GSTP lists cathedral-port LS applications including LS1 and LS6, while BTR Trinity covers cathedral-port LS-based heads.

If you are retaining a cable-drive setup, the specifically cable-oriented options deserve closer inspection. If your LS1 uses drive-by-wire, do not assume cable-only listings will work; verify the exact throttle-body interface with the seller or manufacturer before choosing.

Inlet diameter and operating range

Match the listed inlet diameter to your throttle body and the engine’s intended use. Htostar and GSTP specify 92mm openings, while FAST LSXr, BTR Equalizer 1, and DEEPMOTOR cast and high-ram options list 102mm capacity or openings. FAST states that its LSXr can also be used with OEM or aftermarket 90mm or 92mm throttle bodies.

The BTR Equalizer 1 lists a 6,000–8,000-plus rpm ideal range for sub-four-inch-stroke applications, and Trinity lists 6,000–8,500 rpm. Buyers seeking a specifically stated high-RPM design should weigh those BTR ranges; others should prioritize exact component compatibility over the biggest opening.

Fuel-rail and injector provisions

Check whether rails are included and whether the manifold’s injector provisions match your existing parts. BTR Trinity includes its FRK-02 fuel rail kit, BTR Equalizer 1 includes a billet fuel rail kit, and the DEEPMOTOR cast manifold lists included fuel rails with -8 AN fittings. GSTP specifies 8AN fuel-rail fittings and says its bracket accommodates original LS1, LS2, or LS6 injectors without additional spacers or modifications.

POSENG warns that other injectors may require bracket changes or spacers. A buyer reusing original LS1 injectors may prefer the specifically described GSTP provision; someone seeking an included rail kit can compare the BTR options and verify connector, fitting, and injector compatibility.

Which LS1 Intake Should You Choose?

For a broadly suitable LS1 manifold with a clearly described throttle-body range, choose FAST LSXr 102mm. It explicitly names LS1 fitment, has longer runners, and lists compatibility with 90mm and 92mm throttle bodies as well as its 102mm opening. If included rails matter, BTR Trinity Intake includes the FRK-02 kit, while BTR Equalizer 1 pairs a billet rail kit with a stated high-RPM operating range.

For a 92mm option and original LS injectors, GSTP 92mm Manifold specifies bracket compatibility without extra spacers or modifications. Choose Htostar 92mm Manifold or POSENG 92mm Manifold only after confirming cable-drive requirements.

The DEEPMOTOR High-Ram is aimed at large-plenum, high-flow builds, and RiAiCiING Swap Intake is a cold-air system, not a replacement intake manifold.

Frequently Asked Questions

How do I verify whether my LS1 has cathedral-port heads?

Confirm the head style using your vehicle or engine documentation, then verify it against the head identification and the intake listing. Do not rely on “LS1” alone: the products here specify cathedral-port compatibility, and the article recommends confirming your head type before purchase if the fitment is uncertain.

Will a 102mm intake opening work with my existing throttle body?

Not automatically. The 102mm opening is intended for a matching large throttle body, although the FAST LSXr listing also describes compatibility with OEM or aftermarket 90mm and 92mm throttle bodies. Check the exact intake and throttle-body compatibility before buying; the opening size alone does not confirm that your existing setup will fit.

What fuel rails, injectors, and fittings do I need for an LS1 intake swap?

Check which rails and injector compatibility the specific listing includes, then compare them with your existing setup. BTR Trinity includes the FRK-02 kit, while BTR Equalizer 1 includes a billet rail kit. GSTP’s 92mm option specifies bracket compatibility with original LS injectors; verify any remaining fittings with the seller.

How can I tell whether an intake requires a cable-drive throttle body?

Check the product listing for an explicit throttle-drive requirement before ordering. The article flags Htostar 92mm and POSENG 92mm as options to choose only after confirming cable-drive requirements. If your setup differs or the listing is unclear, confirm compatibility with the seller rather than assuming the throttle body will work.

Is a cold-air intake the same as an intake manifold?

No. The RiAiCiING Swap Intake is described as a cold-air system, not a replacement intake manifold. If you need to replace the manifold itself, compare the manifold options and confirm head and throttle-body fitment.

Choose a cold-air system only when that is the component your build needs.

Final Words

For a broadly suitable LS1 manifold in this selection, the FAST LSXr 102mm is the leading choice: it names LS1 fitment, has longer runners, and lists 90mm and 92mm throttle-body compatibility alongside its 102mm opening. Confirm your cathedral-port heads and throttle setup first. If included rails are a priority, consider BTR Trinity or Equalizer 1; for cable-drive options, verify requirements before ordering.

Leave a Reply

Your email address will not be published. Required fields are marked *