Best Side By Side Mirrors for Round-Cage UTVs

#1 · Best Overall

1. ISSYZONE Side Mirrors

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Compatible with Vehicle Type: 1.6" -2" Roll Bar Cage, Compatible with…
• Size: 7.5"*3.7"

Best for: Wide-view round-cage riders.

Why it ranks #1: Two clamp sets cover 1.6–2-inch round tubes, while 3.7-by-7.5-inch mirrors and 360-degree adjustment suit a broad range of UTV setups.

The 3.7-by-7.5-inch mirror face gives ISSYZONE’s UTV pair a broad viewing area, helping riders monitor more of the space behind and beside the vehicle. Two clamp sizes cover round roll cages from 1.6 to 2 inches, while the adjustable mirror position lets you set an angle that suits your seating position.

The included 1.75- and 2-inch clamps, along with six rubber pads, support mounting across the stated 1.6-to-2-inch round-tube range. That range and the pads make it easier to secure the pair to different cage diameters. The mirrors adjust up and down or front to back, so you can tune the view after mounting. An explosion-proof membrane on the back of the glass is intended to help prevent injury from broken glass. The stated fit excludes Pro-Fit cages on specified Ranger, Defender, and UForce models.

Skip it if you have a Pro-Fit cage on a listed Ranger, Defender, or UForce; these clamps are for round-bar cages.

Choose this pair if your UTV has a 1.6-to-2-inch round cage and you want wide mirrors with several adjustment directions. Its stated cage restriction matters: it will not suit the specified Pro-Fit Ranger, Defender, or UForce models.

Listed on Amazon as: UTV Side Mirrors with 1.6" -2" Roll Bar Cage, Side by Side Mirrors 360 Degree Adjustable Compatible with Polaris RZR Kawasaki Mule Teryx Pioneer Can Am Rhino YXZ Shatter-Proof

#2 · Best Side-and-Center Kit

2. KEMIMOTO Side and Center Mirror

• Material: Glass
• Compatible with Vehicle Type: UTV
• Size: side mirror 7.28"x3.74", center mirror 8"x4.5"

Best for: Side-and-center mirror coverage.

Why it ranks #2: Includes a pair of 3.7-by-7.5-inch side mirrors and an 8-by-4.5-inch center mirror, adding a rear-view option beyond side coverage.

A center mirror joins the two 3.7-by-7.5-inch side mirrors in KEMIMOTO’s set, giving drivers both side and rear viewing positions from one package. The center mirror’s non-slip ball joint rotates through 360 degrees, so you can change its viewing angle to suit the cabin layout and your preferred line of sight.

The side mirrors measure 3.7 by 7.5 inches, a broad face intended to maintain a clear view across rough terrain and whoops. The separate 8-by-4.5-inch center mirror adds another rearward view, useful when you want to check what is approaching from behind without relying only on the side pair. Its non-slip ball joint and 360-degree rotation support angle adjustment. The title specifies 1.6-to-2-inch roll-bar cages, making cage diameter a key fit check before installation.

Skip it if you only want a side pair and do not need the included center mirror or its extra rear-view position.

This set suits UTV drivers seeking side and center rear views, especially those who value an adjustable center mirror. Check the stated 1.6-to-2-inch roll-bar range and account for the added center mirror when choosing a side-only setup.

Listed on Amazon as: KEMIMOTO UTV Side Mirrors And Center Mirror with 1.6" to 2" Roll Bar Cage

#3 · Best Impact-Folding Design

3. SHEJISI RH-203 Mirrors

• Material: Acrylonitrile Butadiene Styrene (ABS)…
• Compatible with Vehicle Type: UTV
• Size: Medium

Best for: Impact-folding trail riders.

Why it ranks #3: Designed for 1.5–2-inch round roll bars, these mirrors fold and reset automatically after an obstacle strike, reducing the need for manual repositioning.

SHEJISI’s mirrors automatically fold and reset after hitting an obstacle, allowing the driver to keep moving without getting out to reposition them by hand. The stated 1.5-to-2-inch round-roll-bar fit covers a broad range of cage diameters, and the pair is listed for machines including Polaris RZR, Can-Am X3, Honda Pioneer, Kawasaki Mule, and CFMoto ZForce.

Automatic folding and resetting are the defining feature: when an obstacle strikes a mirror, it can move out of the way and return without a manual adjustment stop. That can simplify progress through close trail sections where contact is possible. The stated 1.5-to-2-inch round-bar range accommodates several UTV cage sizes, with named compatibility including Polaris RZR, Can-Am X3, Honda Pioneer, Kawasaki Mule, and CFMoto ZForce. ABS, aluminum, and glass make up the listed materials; the package includes two mirrors, accessories, a mounting tool, and instructions.

Skip it if you have a cage outside the stated 1.5-to-2-inch round-bar range or need mirrors specified for a different cage shape.

Pick these for a UTV driver who encounters obstacles and wants mirrors that fold and reset automatically rather than requiring manual repositioning. The key fit boundary is the stated 1.5-to-2-inch round-tube roll bar.

Listed on Amazon as: SHEJISI UTV Side Mirrors,UTV Mirror Automatic Folding and Resetting in The Event of Collision,Fits 1.5"-2"Roll Bars Compatible with Polaris RZR,Can Am X3, Honda Pioneer, Kawasaki Mule, Cfmoto Zforce

#4 · Largest Listed Mirror

4. BETOOLL Adjustable Mirrors

• Material: Acrylonitrile Butadien Styrene Glass
• Compatible with Vehicle Type: UTV
• Size: UTV Side Mirror

Best for: Large-face mirror seekers.

Why it ranks #4: Its 4.5-by-8.5-inch convex mirrors are larger than the listed dimensions of several alternatives, with clamp and rubber-sheet combinations for multiple tube sizes.

BETOOLL uses 4.5-by-8.5-inch convex mirrors to provide a large viewing surface for checking behind a UTV. Its setup includes rings and thin and thick rubber sheets for specified 1.75- and 2-inch tubing, with combinations described for narrower measurements as well. The pack contains two mirrors, making this a side-pair option rather than a center-mirror set.

The oversized 4.5-by-8.5-inch convex glass gives riders a broad mirror face, which can help them scan more of the area behind the vehicle. BETOOLL’s compatibility setup includes fixed rings and rubber sheets for 1.75- and 2-inch tubing; the listed combinations also describe reaching 1.64 inches with the 1.75-inch setup. A symmetrical shell is said to distribute stress evenly across the mirror surface, supporting durability. The package is a pair with clamps and hardware, so it provides side coverage without a listed center mirror.

Skip it if you need a center mirror or want a clearly stated fit range beyond the listed 1.75- and 2-inch tubing setups.

Consider this pair if a large convex mirror face is your priority and your cage matches the included ring-and-sheet setup. It supplies two side mirrors; buyers seeking an included center mirror or broader stated compatibility should look elsewhere.

Listed on Amazon as: BETOOLL Upgraded Adjustable Pair UTV Side Mirror Set 1.75 or 2inch Roll Bar Cage, Universal UTV Side View Mirrors High Impact(Pack of 2)

#5 · Best Breakaway Option

5. Chupacabra Offroad Mirror Kit

• Material: Acrylonitrile Butadiene Styrene (ABS), Glass
• Compatible with Vehicle Type: ATV, UTV
• Size: 4 in wide by 7.2 in tall

Best for: Breakaway adjustable mirror pair.

Why it ranks #5: Fits stated 1 5/8–2-inch round cages and combines breakaway adjustment with shatter-proof tempered glass; channel-shaped cages are excluded.

Breakaway movement lets Chupacabra Offroad’s mirrors give way when struck, while their adjustable design supports positioning them higher or lower on the cage. Convex tempered glass adds a broad field of sight, and the pair is listed for round roll cages from 1 5/8 to 2 inches across numerous named UTV families.

The breakaway design and adjustable clamps give riders flexibility to position the mirrors and let them move when contacted, a useful combination for vehicles used around obstacles. Chupacabra notes that the convex glass offers a broad range of sight, while the clamps allow high or low mounting positions. The fit covers round tubes from 1 5/8 to 2 inches, but channel-shaped cages are excluded. The listing also warns that a windshield or doors may prevent use, so accessories and cage shape both affect installation.

Skip it if you have a channel-shaped cage or accessories that block the mirrors; the listing warns that some doors and windshields interfere.

This pair suits riders seeking adjustable, breakaway mirrors with convex tempered glass on a compatible round-tube cage. Check for channel-shaped bars and possible door or windshield interference before choosing this mounting style.

Listed on Amazon as: Chupacabra Offroad UTV Side Mirror Kit (2 Pack) Fits 1.6"- 2" Round Roll Cage Bar, Side UTV Mirrors w/Break Away & Adjustable Design – High Impact Shatter Proof Tempered Glass (Driver/Passenger Side)

#6

6. KEMIMOTO Round-Bar Mirrors

• Material: Glass
• Compatible with Vehicle Type: UTV
• Size: 6.7"x4.5"

Best for: Adjustable KEMIMOTO side pair.

Why it ranks #6: Fits 1.65–2-inch round bars and offers three adjustment methods; included rubber mats may help keep the mirrors in place and reduce noise.

Three adjustment methods let KEMIMOTO’s side mirrors be repositioned after installation, so you can change the viewing angle without repeating the mounting process. The pair is listed for 1.65-to-2-inch round roll bars, and included rubber mats can help the mirrors stay in place and reduce noise while driving when added during installation.

The adjustable-after-installation setup gives you room to refine the view once the mirrors are secured, rather than removing and reinstalling them to change the position. KEMIMOTO also lists three adjustment methods, offering more than one way to set the angle. The stated 1.65-to-2-inch round-bar fit narrows compatibility to that cage range. Rubber mats are provided and may help the mirrors stay put while reducing noise; they can be added during mounting if needed. The included hardware supports installation of the pair.

Skip it if you have a round roll bar smaller than 1.65 inches; this pair is listed for bars from 1.65 to 2 inches.

Choose this pair if you want to fine-tune mirror angles after securing them and your round bar measures 1.65 to 2 inches. The listed lower limit is a real fit boundary for smaller-diameter cages.

Listed on Amazon as: KEMIMOTO UTV Side Mirror for 1.65-2 inch Round Roll bar

#7

7. SPAUTO UTV Side Mirrors

• Material: Glass, Plastic
• Compatible with Vehicle Type: UTV
• Size: UTV Side Mirrors Upgrade

Best for: Round-cage side-pair shoppers.

Why it ranks #7: The two-mirror kit is listed for 1.6–2-inch round cages and includes high-impact ABS housings and shatter-proof tempered glass.

A two-mirror driver-and-passenger package gives SPAUTO buyers side coverage on both sides of the UTV, with high-impact ABS housings and shatter-proof tempered glass. The stated 1.6-to-2-inch round-cage fit spans many named UTV lines, while the listing specifically excludes 2015-and-newer Ranger models with Pro-Fit cages.

The pair includes one mirror for each side, so drivers can outfit both sides without sourcing a second unit. High-impact ABS housings and shatter-proof tempered glass are the listed construction features, supporting a rugged outer housing and glass intended to resist shattering. The stated 1.6-to-2-inch round-tube range covers named models including RZR, Mule, Pioneer, ZForce, Rhino, YXZ, Viking, Wolverine, Segway Villain, and Can-Am. The Pro-Fit cage exclusion for 2015-and-newer Ranger models makes cage style a key compatibility check.

Skip it if you have a 2015-or-newer Ranger with a Pro-Fit cage; this set is listed for round-tube cages instead.

Choose SPAUTO’s pair if you need both side mirrors for a compatible 1.6-to-2-inch round cage and value its specified housing and glass materials. The Pro-Fit Ranger exclusion is the central fit boundary.

Listed on Amazon as: UTV Mirrors UTV Side Mirrors for 1.6" – 2" Roll Cage Bar

#8

8. SHEJISI RH-201 Mirrors

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Compatible with Vehicle Type: UTVs that are not suitable for fully enclosed…
• Size: 8.5"*5.3"

Best for: Obstacle-folding open-door UTVs.

Why it ranks #8: Its convex mirrors automatically reset after folding on impact, but the listing excludes some shaped cages and UTVs with fully enclosed doors.

An automatic reset function lets these SHEJISI mirrors fold when they encounter an obstacle and return without requiring hand adjustment. Their convex glass is described as showing more and farther than a flat mirror, giving riders a wider rearward view. The fit listing covers 1.5-to-2-inch roll cages, with important exclusions for some cage and door configurations.

The obstacle-triggered fold-and-reset action can keep a mirror from staying displaced after contact, reducing the need to stop and adjust it manually. Convex glass is specified to show more and farther than a flat mirror, supporting a broader view behind the UTV. The stated fit range is 1.5 to 2 inches, but the product is not suitable for Ranger XP or Can-Am Defender models with the described shaped anti-roll bar. It is also listed as unsuitable for UTVs with fully enclosed doors, so those constraints should guide selection.

Skip it if you use fully enclosed doors or a listed shaped Ranger XP or Defender cage; this mirror set excludes those configurations.

These fit riders who want obstacle-responsive folding and a convex view on a compatible open-door UTV. Check cage shape as well as diameter: fully enclosed doors and the specified Ranger XP and Defender bars are exclusions.

Listed on Amazon as: SHEJISI UTV Side Mirrors,You No Longer Need to Adjust by Hand,Innovative Automatic Reset Function,for 1.5"-2.0" Roll Cage,Compatible with Polaris RZR,Can Am Maverick,Honda Pioneer SXS,Kawasaki Mule

#9

9. SHEJISI Spring-Back Mirrors

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Compatible with Vehicle Type: UTV
• Size: for UTV

Best for: Spring-back broad-fit UTVs.

Why it ranks #9: The spring-back design and broad stated model compatibility are appealing, though the listing excludes fully enclosed doors and some roll-cage configurations.

Built-in spring-back lets these SHEJISI mirrors fold and return after impact, while the listing describes compatibility across a wide range of UTV brands and cage styles. The stated exceptions are models with fully enclosed doors and a small number of roll-cage configurations. The mirrors are also described as windshield-compatible, adding flexibility for equipped vehicles.

Spring-back folding and return address mirror movement after impact, so the driver can continue without manually resetting a displaced mirror. The listing names Polaris, Can-Am, Kawasaki, Honda, Yamaha, CFMoto, and other UTV families, and says installation works with round-tube or PRO-style cages using one bolt. Windshield compatibility may help owners keep that accessory in place. Fully enclosed-door models and a small number of roll-cage configurations are excluded, so the broad compatibility claim still calls for checking those exceptions.

Skip it if you have fully enclosed doors or one of the excluded roll-cage configurations; the listing does not claim universal fit.

Choose these for a UTV owner seeking spring-back mirrors, one-bolt installation, and compatibility with a windshield. Confirm that the vehicle is not among the fully enclosed-door or small-number cage exceptions before relying on the broad fit claim.

Listed on Amazon as: SHEJISI all-new 2026 UTV side mirrors—engineered for maximum compatibility with built-in spring-back that folds and returns on impact. Fits nearly every UTV (except models with full enclosure doors)

#10

10. RANSOTO Side and Center Mirror

• Material: Polycarbonate (PC)
• Compatible with Vehicle Type: ATV, Tractor, UTV
• Size: Model A

Best for: Ranger side-and-center setup.

Why it ranks #10: This kit includes side and center mirrors, but its stated fitment focuses on 1.75- and 2-inch bars and a specific set of Ranger models.

RANSOTO combines side mirrors with a center mirror, giving drivers multiple rear-view positions in one package. Its stated cage fit is limited to 1.75- and 2-inch roll bars, and the listed compatible vehicles include specified Polaris Ranger models. Adjustable, foldable, and shatter-resistant features add practical flexibility for a compatible ATV, tractor, or UTV.

The included center mirror supplements the side pair, letting the driver use a central rearward view as well as side views. The product is listed as adjustable and foldable, so mirror positioning and folding are part of its operating flexibility. Its 1.75- and 2-inch roll-bar requirement is specific, rather than a general fit for every cage diameter. Compatibility details name several Polaris Ranger years and versions, including full-size 570 models with round cages; check the specific model and cage configuration against the listing before installation.

Skip it if you have a roll bar outside 1.75 or 2 inches; this set’s stated fit does not cover other diameters.

This package suits a compatible Ranger or other listed vehicle when you want both side and center rear views, plus foldable adjustment. Its narrow 1.75- and 2-inch cage sizing is the key fit boundary.

Listed on Amazon as: UTV Side Rear View Mirror And Center Mirror For 1.75" to 2" Roll Bar Cage