Best Cheap Car Subs

Best Cheap Car Subs

A strong car sub should add low-frequency output while matching your available space, wiring, and willingness to assemble an enclosure; that makes these picks useful for drivers upgrading factory audio or building a custom system. The selection includes powered under-seat units, individual subwoofer drivers, and a pre-wired loaded enclosure, so they are not interchangeable. Seventour ST800 leads for its active 10-inch design, built-in amplifier, and high- and low-level inputs.

Other options cover 12-inch drivers with stated RMS power, compact 8-inch models, and a 6.5-inch enclosure. Compare speaker size and dimensions first, then confirm your amplifier, impedance, enclosure, and vehicle space before ordering.

Peak wattage alone does not tell you what other equipment a sub needs.

Seventour ST800 is the best overall choice here for a buyer seeking an all-in-one, space-conscious car sub. It is a 10-inch active under-seat unit with a built-in amplifier, aluminum enclosure, and support for high- and low-level inputs. Those features make it a more complete fit for a range of car stereo systems than the listed bare drivers, which need an appropriate amplifier and enclosure.

Check its 2.7-inch depth against your available under-seat space before purchase.

Our Top Picks

Seventour ST800Best Overall

Seventour ST800

Its 10-inch active design has a built-in amplifier, aluminum enclosure, and high- and low-level inputs for flexible system integration.

View on Amazon
FOLTUSYMY RMS-004Best Slim Powered Option

FOLTUSYMY RMS-004

This 10-inch powered subwoofer has a built-in amplifier, high- and low-level inputs, and an aluminum enclosure measuring 2.67 inches deep.

View on Amazon
Skar Audio EVL-1X65D4-V-LPBest Loaded Enclosure

Skar Audio EVL-1X65D4-V-LP

The compact slot-ported enclosure arrives internally wired to 2 ohms and includes a 6.5-inch driver rated at 200W RMS.

View on Amazon

Compare these car subwoofer options

#ProductSpeaker SizeDimensions D x W x HWarranty TypeBuy
1
Seventour ST8001. Seventour ST800Best Overall
10 in2.7"D x 13.5"W x 10.2"HLimitedView on Amazon
2
FOLTUSYMY RMS-0042. FOLTUSYMY RMS-004Best Slim Powered Option
10.23 in13.58"D x 10.23"W x 2.67"HLimitedView on Amazon
3
Skar Audio EVL-1X65D4-V-LP3. Skar Audio EVL-1X65D4-V-LPBest Loaded Enclosure
6.5 in9.88"D x 14.25"W x 5.25"HLimitedView on Amazon
4
Crunch CRW12D44. Crunch CRW12D4Best 12-Inch RMS Detail
12 in12"D x 12"W x 7"H1 Year WarrantyView on Amazon
5
Hifonics HFX12D45. Hifonics HFX12D412-inch Hifonics system builders
12 in7"D x 14.8"W x 14.5"HLimitedView on Amazon
6
Pyle PLPW8D6. Pyle PLPW8DCompact Pyle dual-coil builds
8 in4.3"D x 8.2"W x 8.2"HLimitedView on Amazon
7
BOSS Audio P80DVC7. BOSS Audio P80DVC8-inch BOSS subwoofer installers
8 in8.25"D x 4.25"W x 8.25"HLimitedView on Amazon
8
Mobiator MB-S2248. Mobiator MB-S22412-inch driver-only buyers
12 in13.38"D x 13.38"W x 7.87"HLimitedView on Amazon
9
Pioneer TS-A120D49. Pioneer TS-A120D412-inch Pioneer system builders
12 in6.5"D x 12.5"W x 12.5"HLimitedView on Amazon
10
Pyle PLPW6D10. Pyle PLPW6DSmall-enclosure speaker installers
6.5 in3.1"D x 6.6"W x 6.6"HLimitedView on Amazon

Detailed Reviews: Best Cheap Car Subs

Seventour ST800

#1 · Best Overall

1. Seventour ST800

  • Speaker Size: 10 in
  • Dimensions D x W x H: 2.7"D x 13.5"W x 10.2"H
  • Warranty Type: Limited

Best for: Under-seat powered-system buyers.

Why it ranks #1: Its 10-inch active design has a built-in amplifier, aluminum enclosure, and high- and low-level inputs for flexible system integration.

A 10-inch active subwoofer with a built-in amplifier fits an under-seat audio upgrade without requiring a separate subwoofer amplifier. Its slim 2.7-inch-deep aluminum enclosure suits buyers who want bass while preserving cabin space, and the blue LED halo adds a visible accent when the car starts.

High- and low-level inputs let the ST800 connect with a variety of car stereo and head-unit equipment, making it a flexible option across supported systems. Its 13.5-by-10.2-inch footprint and 2.7-inch depth support under-seat placement in cars, trucks, or buses, while the built-in amplifier keeps the subwoofer and amplification together. The cast-aluminum enclosure is specified for heat dissipation, and the blue LED ring provides a lit visual detail when the vehicle starts.

Pros
  • 10-inch powered subwoofer with built-in amplifier
  • Slim 2.7-inch-deep enclosure for under-seat placement
  • High- and low-level inputs support varied stereo equipment
  • Blue LED halo lights when the car starts
Cons
  • The supplied specifications do not state RMS power, limiting power-output comparisons.

Skip it if you need a stated RMS rating to size an amplifier; the Pyle PLPW6D lists 300 watts RMS.

Choose the Seventour ST800 for a car, truck, or bus owner seeking an integrated under-seat subwoofer, stereo input flexibility, and blue cabin lighting. Its shallow enclosure helps conserve space, but measure the intended mounting area.

Full product details
BrandSeventour
Audio Driver Size10 inches
Compatible DevicesBus, Car, Truck
Compatible with Vehicle TypeBus, Car, Truck
Enclosure MaterialAluminum
Input Voltage12 volts
Dimensions2.7"D x 13.5"W x 10.2"H
ManufacturerSeventour
ModelST800
Model NumberBlue LED Subwoofer+Installation Wire Kit
Speaker Size10 inches
Warranty Description1 year
Warranty TypeLimited

Listed on Amazon as: 10" 800W Under Seat Car Subwoofer and amp package,Pure and Pleasant Bass

View on Amazon
FOLTUSYMY RMS-004

#2 · Best Slim Powered Option

2. FOLTUSYMY RMS-004

  • Speaker Size: 10.23 in
  • Dimensions D x W x H: 13.58"D x 10.23"W x 2.67"H
  • Warranty Type: Limited

Best for: Slim powered bass seekers.

Why it ranks #2: This 10-inch powered subwoofer has a built-in amplifier, high- and low-level inputs, and an aluminum enclosure measuring 2.67 inches deep.

FOLTUSYMY's 10-inch powered subwoofer combines a built-in amplifier with a slim 2.67-inch profile, enabling an under-seat-style bass upgrade without a separate amp enclosure. The listing also highlights a 1200-watt peak-power upgrade and blue LED lighting for buyers prioritizing a compact, illuminated setup.

The integrated amplifier and slim aluminum enclosure bring the subwoofer and amplification together in a compact 13.58-by-10.23-by-2.67-inch package, which can simplify space planning compared with separate components. High- and low-level inputs, identified in the title, support connection to different kinds of car audio systems. The listed peak rating is 1200 watts, not an RMS figure, so buyers should use the available specifications carefully when matching it to their system.

Pros
  • 10-inch slim powered subwoofer with built-in amplifier
  • 2.67-inch depth supports space-conscious placement
  • High- and low-level inputs are identified in the title
  • Blue LED light is included
Cons
  • The supplied specifications do not give an RMS power rating.

Skip it if you need a stated RMS rating before selecting a driver; the Pyle PLPW8D specifies 400 watts RMS.

Pick the FOLTUSYMY RMS-004 if you want a slim powered subwoofer, input flexibility, and blue lighting in one unit. Its dimensions aid space planning, but the listing gives peak power rather than an RMS figure.

Full product details
BrandFOLTUSYMY
Audio Driver Size10 inches
Enclosure MaterialAluminum
Dimensions13.58"D x 10.23"W x 2.67"H
ManufacturerFOLTUSYMY
ModelRMS-004
Model NumberRMS-004
Speaker Size10.23 inches
Warranty Description1
Warranty TypeLimited

Listed on Amazon as: FOLTUSYMY 1200W 10" Slim Under Seat Powered Car Subwoofer, High/Low Level Input, Car/Truck Audio Sub Built-in Amplifier amp Combo Package, with Blue LED Light

View on Amazon
Skar Audio EVL-1X65D4-V-LP

#3 · Best Loaded Enclosure

3. Skar Audio EVL-1X65D4-V-LP

  • Speaker Size: 6.5 in
  • Dimensions D x W x H: 9.88"D x 14.25"W x 5.25"H
  • Warranty Type: Limited

Best for: Compact loaded-enclosure buyers.

Why it ranks #3: The compact slot-ported enclosure arrives internally wired to 2 ohms and includes a 6.5-inch driver rated at 200W RMS.

Skar Audio packages a 6.5-inch dual 4-ohm subwoofer in a low-profile slot-ported enclosure that is only 5.25 inches deep, enabling a compact, pre-wired installation. The enclosure arrives internally wired for a final 2-ohm load, so buyers can plan amplifier compatibility around the supplied configuration.

The loaded enclosure measures 14.25 inches wide, 9.88 inches deep, and 5.25 inches high, providing concrete dimensions for checking available mounting space. Internal wiring presents a final 2-ohm impedance, reducing the need to configure the included driver separately. A slot port and 56 Hz tuning define the enclosure design, while the grille protects the subwoofer and the 5/8-inch MDF construction provides its cabinet structure.

Pros
  • Loaded 6.5-inch subwoofer and enclosure package
  • Low-profile enclosure with 5.25-inch depth
  • Pre-wired for a final 2-ohm impedance load
  • Slot port, 56 Hz tuning, and protective grille
Cons
  • The listed enclosure is tuned to 56 Hz, a fixed cabinet configuration.

Skip it if you want a standalone 12-inch driver to fit your own enclosure; the Crunch CRW12D4 is a driver-only 12-inch option.

Choose the Skar Audio package if you want a compact, pre-wired loaded enclosure and can accommodate its 2-ohm final load. Its shallow profile aids fit planning, but the 6.5-inch driver and cabinet tuning are fixed.

Full product details
BrandSkar Audio
Audio Driver Size6.5 inches
ColorBlack
Compatible DevicesGaming Console, Laptop, Smartphone
Compatible with Vehicle TypeCar
Enclosure MaterialFiberboard
Dimensions9.88"D x 14.25"W x 5.25"H
ManufacturerSkar Audio
ModelEVL-1X65D4-V-LP
Model NumberEVL-1X65D4-V-LP
Speaker Size6.5 inches
Warranty Description2 Year Limited Warranty
Warranty TypeLimited
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: Cancer – www.P65Warnings.ca.gov

Listed on Amazon as: Skar Audio EVL-1X65D4-V-LP 6.5" 400 Watt Low Profile Slot Port Loaded Car Subwoofer Enclosure

View on Amazon
Crunch CRW12D4

#4 · Best 12-Inch RMS Detail

4. Crunch CRW12D4

  • Speaker Size: 12 in
  • Dimensions D x W x H: 12"D x 12"W x 7"H
  • Warranty Type: 1 Year Warranty

Best for: Enclosure-flexible 12-inch builds.

Why it ranks #4: Its 12-inch driver is rated at 400W RMS and supports sealed or vented enclosures, with a dual voice coil and 4-ohm impedance.

Crunch's CRW12D4 offers a 12-inch driver rated at 400 watts RMS and supports small or medium sealed enclosures as well as large vented ones. That enclosure range gives builders room to shape the installation around available space, while its dual voice coil and spade-style terminals add concrete wiring details.

The 4-ohm dual voice coil and spade-style terminals make connection planning more straightforward for a car audio build. Crunch specifies both sealed and vented enclosure options, including small or medium sealed boxes and large vented boxes, giving buyers alternatives based on available installation space. A vented aluminum former and back-venting steel frame are described as helping exchange heat, while the foam surround and poly-cotton spider support linear piston motion.

Pros
  • 12-inch driver rated at 400 watts RMS
  • Fits small or medium sealed and large vented enclosures
  • Dual voice coil with 4-ohm impedance
  • Spade-style terminals support installation
Cons
  • The listed enclosure options do not include open-air mounting.

Skip it if you want an explicitly listed open-air enclosure option; the Pyle PLPW6D is specified for sealed, vented, or open-air use.

The CRW12D4 suits car audio builders seeking a 12-inch driver with enclosure choices and clear connection details. Its heat-management features support sustained operation, but buyers planning an open-air installation should consider another listed option.

Full product details
BrandCrunch
Audio Driver Size12 inches
ColorBlack
Compatible DevicesGaming Console, MP3 Player, Smartphone, Television
Compatible with Vehicle TypeCar
Enclosure MaterialMetal
Dimensions12"D x 12"W x 7"H
Item Weight8.2 pounds
ManufacturerMAXXSONICS
ModelCRW12D4
Model NumberCRW12D4
Speaker Size12 inches
Warranty Description1 year
Warranty Type1 Year Warranty

Listed on Amazon as: Crunch CRW 12 Inch 800 Watt 4 Ohm Dual Voice Coil Car Audio Subwoofer

View on Amazon
Hifonics HFX12D4

#5

5. Hifonics HFX12D4

  • Speaker Size: 12 in
  • Dimensions D x W x H: 7"D x 14.8"W x 14.5"H
  • Warranty Type: Limited

Best for: 12-inch Hifonics system builders.

Why it ranks #5: This 12-inch dual voice-coil driver lists 400W RMS, a 4-ohm impedance, and a heavy-duty steel frame with back venting.

Hifonics' HFX12D4 combines a 12-inch driver with 400 watts RMS and an 800-watt peak rating, giving car-audio builders both continuous and maximum power figures for system planning. Its dual voice coil and spade-style terminals add practical wiring details for a driver intended for varied setups, including powersports vehicles.

The 12-inch format and 7-inch listed depth help buyers assess enclosure and mounting requirements before choosing an installation location. Its dual voice coil and spade-style terminals support connection planning, while the 400-watt RMS rating gives a defined figure for matching an amplifier. Hifonics also specifies a vented aluminum former and powder-coated steel frame with back venting, features described as exchanging heat and supporting power handling and reliability.

Pros
  • 12-inch driver with 400-watt RMS rating
  • 800-watt peak power rating
  • Dual voice coil with spade-style terminals
  • Vented aluminum former and back-venting steel frame
Cons
  • The listing specifies car compatibility, not a range of vehicle types.

Skip it if you need compatibility explicitly listed for buses, RVs, trucks, and vans; the Pyle PLPW8D lists those vehicle types.

The HFX12D4 suits car-audio builders seeking a 12-inch driver with RMS power details, dual-coil wiring, and heat-management features. Its 7-inch depth matters when planning an enclosure, and listed vehicle compatibility is limited to cars.

Full product details
BrandHifonics
Audio Driver Size12 inches
Colorblack
Compatible DevicesCar Audio System
Compatible with Vehicle TypeCar
Enclosure MaterialSteel, Foam
Dimensions7"D x 14.8"W x 14.5"H
Item Weight7.8 pounds
ManufacturerHifonics
ModelHFX12D4
Model NumberHFX12D4
Speaker Size12 inches
Warranty Description1 YEAR
Warranty TypeLimited
Additional InformationImportant information

Listed on Amazon as: Hifonics HFX 12 Inch 800 Watt 4 Ohm Dual Voice Coil Car Subwoofer

View on Amazon
Pyle PLPW8D

#6

6. Pyle PLPW8D

  • Speaker Size: 8 in
  • Dimensions D x W x H: 4.3"D x 8.2"W x 8.2"H
  • Warranty Type: Limited

Best for: Compact Pyle dual-coil builds.

Why it ranks #6: The 8-inch driver offers 400W RMS, a dual 4-ohm voice coil, and a compact 4.3-inch depth for custom installations.

Pyle's 8-inch PLPW8D combines a 400-watt RMS rating with dual 4-ohm voice coils, giving compact car-audio builds useful power and wiring specifications. At 4.3 inches deep, it occupies a smaller driver format than the listed 12-inch alternatives while retaining a stated 800-watt peak rating.

The 8-inch driver and 4.3-inch depth help buyers plan a smaller installation than a 12-inch subwoofer requires, while the dual 4-ohm voice coils provide a specific configuration detail for system wiring. Pyle lists 400 watts RMS and 800 watts peak, which offers more planning context than a peak-only rating. Spring-loaded terminals are specified for connection, and compatibility spans cars, buses, RVs, trucks, and vans.

Pros
  • 8-inch driver for a compact-format build
  • 400-watt RMS and 800-watt peak ratings
  • Dual 4-ohm voice coils
  • Compatible with cars, buses, RVs, trucks, and vans
Cons
  • Its 8-inch driver is smaller than the listed 12-inch options.

Skip it if you need a 12-inch driver for your enclosure; the Hifonics HFX12D4 is a 12-inch alternative.

Choose the PLPW8D for a compact vehicle build needing dual-coil wiring details and stated RMS power across several vehicle types. Its 8-inch format saves space relative to 12-inch drivers, but does not match their size.

Full product details
BrandPyle
Audio Driver Size8 inches
ColorBlack
Compatible DevicesSmartphone, Tablet, MP3 Player, Laptop
Compatible with Vehicle TypeBus, Car, RV, Truck, Van
Enclosure MaterialMetal, Plastic
Dimensions4.3"D x 8.2"W x 8.2"H
Item Weight2 pounds
ManufacturerSound Around
ModelPLPW8D
Model NumberPLPW8D
Speaker Size8 inches
Warranty Description1 Year Warranty
Warranty TypeLimited
Additional InformationImportant information

Listed on Amazon as: Pyle 8" Car Subwoofer Speaker – 800 Watt Dual 4 Ohm Voice Coil, Treated Foam Surround, Non-Pressed Paper Cone, 60oz Magnet – Powerful Vehicle Audio Bass Woofer for Car Stereo Systems – PLPW8D (Black)

View on Amazon
BOSS Audio P80DVC

#7

7. BOSS Audio P80DVC

  • Speaker Size: 8 in
  • Dimensions D x W x H: 8.25"D x 4.25"W x 8.25"H
  • Warranty Type: Limited

Best for: 8-inch BOSS subwoofer installers.

Why it ranks #7: This 8-inch driver is rated at 500W RMS and has dual 4-ohm voice coils, but it is sold individually and needs an amplifier.

BOSS Audio Systems' P80DVC pairs an 8-inch driver with a 500-watt RMS rating and a listed 42 Hz frequency response, giving system builders more than a peak-power figure for selection. Its dual 4-ohm voice coil is a useful wiring detail for buyers connecting it to a separate amplifier.

The 8-inch size and 4.25-inch listed depth help with enclosure planning for a smaller-format installation, while the dual 4-ohm voice coil informs amplifier and wiring decisions. BOSS specifies 500 watts RMS and 1000 watts maximum, plus 88dB sensitivity and a 42 Hz frequency response for comparing system characteristics. The product description says to hook it up to an amp, so buyers should include separate amplification in their setup plan.

Pros
  • 8-inch driver with 500-watt RMS rating
  • 1000-watt maximum power rating
  • 42 Hz frequency response and 88dB sensitivity
  • Dual 4-ohm voice coil
Cons
  • Requires a separate amplifier; the listing describes hookup to an amp.

Skip it if you want an integrated powered unit for under-seat placement; the Seventour ST800 includes a built-in amplifier.

The P80DVC fits buyers assembling an 8-inch system around a separate amplifier and weighing RMS power, frequency response, and sensitivity. Its compact driver size aids enclosure planning, but amplification remains a separate component.

Full product details
BrandBOSS Audio Systems
Audio Driver Size8 inches
Colorschwarz
Compatible DevicesDesktop, Laptop, MP3 Player, Projector, Smartphone, Tablet, Television
Compatible with Vehicle TypeBus, Car, RV, Tractor, Truck, Van
Input Voltage12 volts_of_direct_current
Dimensions8.25"D x 4.25"W x 8.25"H
Item Weight4.4 pounds
ManufacturerBOSS Audio Systems
ModelP80DVC
Model NumberP80DVC
Speaker Size8 inches
Warranty Description3 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers
Warranty TypeLimited

Listed on Amazon as: BOSS Audio Systems P80DVC Dual 4 Ohm 1000 Watt 8 Inch Car Subwoofer

View on Amazon
Mobiator MB-S224

#8

8. Mobiator MB-S224

  • Speaker Size: 12 in
  • Dimensions D x W x H: 13.38"D x 13.38"W x 7.87"H
  • Warranty Type: Limited

Best for: 12-inch driver-only buyers.

Why it ranks #8: Its 12-inch driver lists 400W RMS, dual magnets, and a two-year warranty, though the supplied data gives fewer installation details.

Mobiator's MB-S224 pairs a 12-inch cone with a stated 400-watt RMS rating, offering car-audio builders a defined power figure in a driver-only format. Its dual magnets and 2-inch, four-layer voice coil are named hardware details for buyers choosing a subwoofer to fit an existing enclosure and amplifier setup.

The 12-inch driver and 13.38-inch-square dimensions help establish the enclosure space required before installation, while the 7.87-inch depth is relevant to mounting clearance. Its 400-watt RMS and 1600-watt maximum ratings distinguish continuous and peak figures for system planning. The 4-ohm specification and dual-magnet construction provide additional selection details, but this listing does not identify a built-in amplifier or loaded enclosure, so buyers should plan the rest of the setup accordingly.

Pros
  • 12-inch driver with 400-watt RMS rating
  • 1600-watt maximum power rating
  • 4-ohm impedance and dual magnets
  • 2-inch, four-layer voice coil
Cons
  • This is a driver listing, not a powered subwoofer or loaded enclosure.

Skip it if you want a subwoofer and enclosure in one package; the Skar Audio EVL-1X65D4-V-LP comes loaded in an enclosure.

Choose the MB-S224 if you are assembling a 12-inch system around a separate enclosure and amplifier, and want its RMS rating and voice-coil details for planning. Confirm enclosure space around its listed dimensions before installation.

Full product details
Brandmobiator
Audio Driver Size12 inches
ColorBlack
Enclosure MaterialPaper, Foam, Plastic/Metal
Dimensions13.38"D x 13.38"W x 7.87"H
Item Weight6.8 kg
ManufacturerMOBIATOR
ModelMB-S224
Model NumberMB-S224
Speaker Size12 inches
Warranty Description2 Year Warranty
Warranty TypeLimited

Listed on Amazon as: MOBIATOR-12 Inch Car Subwoofer 1600W Max 400W RMS Dual Magnets (108Oz), 2 Inch 4 Layer Voice Coil, 4Ohm Easy to Install, Black-S224 (MB-S224)

View on Amazon
Pioneer TS-A120D4

#9

9. Pioneer TS-A120D4

  • Speaker Size: 12 in
  • Dimensions D x W x H: 6.5"D x 12.5"W x 12.5"H
  • Warranty Type: Limited

Best for: 12-inch Pioneer system builders.

Why it ranks #9: The 12-inch driver offers a larger cone size, but the supplied listing gives 1500W maximum power without an RMS rating.

Pioneer's 12-inch A-Series driver pairs an oversized cone with a 1500-watt maximum rating, giving car and truck audio builders a larger subwoofer format for adding high-impact bass. Its listed dimensions—6.5 inches deep and 12.5 inches wide and tall—make enclosure planning central to installation.

The 12-inch driver and Pioneer’s description of integration with its A full-range loudspeakers make this a fit for buyers assembling a coordinated in-car system. The stated maximum power is 1500 watts, though no RMS figure is supplied here, so it does not provide the same RMS-based planning detail as the Crunch CRW12D4. At 10.3 pounds and 6.5 inches deep, it also calls for an enclosure and mounting plan that accommodates its footprint.

Pros
  • 12-inch driver for a larger-format subwoofer installation
  • 1500-watt maximum power rating
  • Described as integrating with Pioneer A full-range loudspeakers
  • Compatible with car and truck systems
Cons
  • No RMS power rating is supplied for power-handling comparisons.

Skip it if you need a published RMS figure for system planning; the Crunch CRW12D4 specifies 400 watts RMS.

The TS-A120D4 suits Pioneer A-series owners and other car or truck builders seeking a 12-inch driver with a stated maximum rating. Plan around its 12.5-inch width and height, and note that RMS power is unspecified.

Full product details
BrandPIONEER
Audio Driver Size12 inches
ColorBlack
Compatible DevicesCar / Truck
Compatible with Vehicle TypeCar, Truck
Enclosure MaterialButyl Rubber
Dimensions6.5"D x 12.5"W x 12.5"H
Item Weight10.3 pounds
ManufacturerPioneer Corporation
ModelA Series
Model NumberTS-A120D4
Speaker Size12 inches
Warranty Description1 year
Warranty TypeLimited

Listed on Amazon as: PIONEER A-Series TS-A120D4 12" Subwoofer 1500W Max

View on Amazon
Pyle PLPW6D

#10

10. Pyle PLPW6D

  • Speaker Size: 6.5 in
  • Dimensions D x W x H: 3.1"D x 6.6"W x 6.6"H
  • Warranty Type: Limited

Best for: Small-enclosure speaker installers.

Why it ranks #10: This 6.5-inch bare driver is rated at 300W RMS, but its small size and need for separate system components make it a narrower fit.

Pyle's 6.5-inch PLPW6D combines a compact driver with a 300-watt RMS rating, giving enclosure builders a clearly specified power figure in a smaller-format subwoofer. Its dual voice coil and listed compatibility with sealed, vented, or open-air enclosures offer flexibility when planning a vehicle audio installation.

The 6.5-inch size and 3.1-inch depth make the PLPW6D a compact option for buyers working with limited enclosure dimensions. Its 4-ohm dual voice coil and spring-loaded push-down terminals provide practical wiring and connection details for setup, while the 300-watt RMS and 600-watt peak ratings help inform power matching. Pyle lists sealed, vented, and open-air enclosure use, so the installation need not be limited to one enclosure style.

Pros
  • Compact 6.5-inch driver with 3.1-inch depth
  • 300-watt RMS and 600-watt peak ratings
  • Dual voice coil with 4-ohm impedance
  • Listed for sealed, vented, or open-air enclosures
Cons
  • Its 6.5-inch driver is smaller than the listed 12-inch subwoofer options.

Skip it if you want a 12-inch driver for a larger-format enclosure; the Crunch CRW12D4 is a 12-inch alternative.

The PLPW6D fits installers seeking a small driver, a stated RMS rating, and multiple enclosure options for a car audio system. Its 6.5-inch size suits compact builds, but it is not a 12-inch format.

Full product details
BrandPyle
Audio Driver Size6.5 inches
Color6-inch
Compatible DevicesCar Audio Systems
Compatible with Vehicle TypeCar
Enclosure MaterialPlastic
Dimensions3.1"D x 6.6"W x 6.6"H
Item Weight2.7 pounds
ManufacturerSound Around
ModelPLPW6D
Model NumberPLPW6D
Speaker Size6.5 inches
Warranty DescriptionWarranty
Warranty TypeLimited
Additional InformationImportant information

Listed on Amazon as: Car Vehicle Subwoofer Audio Speaker – 6.5 Non-Pressed Paper Cone, Black Plastic Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, Foam Surround for Vehicle Stereo Sound System – Pyle PLPW6D

View on Amazon

Avoid mismatching the sub, amp, and enclosure

A subwoofer’s maximum wattage is not enough to establish that it will work with an existing amplifier. For example, the Pyle PLPW8D lists 800W peak and 400W RMS, while the BOSS Audio P80DVC lists 1000W maximum and 500W RMS; those are different power figures, and the available data does not establish that either is a drop-in match for a particular amp. Check the amplifier’s supported impedance and power output against the sub’s voice-coil configuration and rated RMS power.

Enclosure needs also vary: Crunch CRW12D4 is specified for small or medium sealed boxes or a large vented box, while the Skar Audio EVL-1X65D4-V-LP is already loaded and internally wired to a final 2-ohm load. Treat those as different installation paths, not just different speaker sizes.

An incorrect wiring or enclosure assumption can undermine fit and system compatibility.

Measure the installation space, not just the cone

A smaller speaker does not automatically mean a simpler installation, and a slim powered unit still needs clearance around its body. The Seventour ST800 measures 2.7 inches deep and is designed for under-seat placement; the FOLTUSYMY RMS-004 is 2.67 inches deep, but its listed dimensions are 13.58 by 10.23 by 2.67 inches. Compare the full product dimensions with the intended mounting location, including space for wiring and access to connections.

A conventional driver such as the 12-inch Crunch CRW12D4 needs an appropriate separate enclosure, while the Skar Audio EVL-1X65D4-V-LP includes an enclosure measuring 9.88 by 14.25 by 5.25 inches. That loaded option trades a ready-built box for a fixed footprint and tuning.

Confirm available vehicle space and installation orientation before choosing by speaker diameter alone.

How to Choose a Car Subwoofer

Powered unit or bare driver

Choose a powered model if you want the amplifier integrated; choose a bare driver if you are building around separate components. Seventour ST800 and FOLTUSYMY RMS-004 are active powered units with built-in amplifiers, while the Pyle PLPW8D, Crunch CRW12D4, and Pioneer TS-A120D4 are individual drivers. The Skar Audio EVL-1X65D4-V-LP is a different middle ground: it is a driver already loaded into an enclosure and pre-wired to 2 ohms.

An under-seat buyer who wants fewer separate parts should consider a powered option, while someone with an existing amplifier and enclosure plan may prefer a bare driver. Confirm what is included for the exact listing before buying; the supplied data does not establish that every product includes wiring or installation hardware.

Speaker size and available space

Match the listed speaker and enclosure dimensions to your vehicle before deciding that a size will fit. Options range from 6.5-inch drivers such as Pyle PLPW6D and the loaded Skar Audio EVL-1X65D4-V-LP to 12-inch drivers such as Crunch CRW12D4 and Pioneer TS-A120D4. The Seventour ST800 and FOLTUSYMY RMS-004 are 10-inch slim powered designs, with listed depths of 2.7 and 2.67 inches respectively.

A compact under-seat location favours a shallow powered unit, while a larger custom installation may accommodate a 12-inch driver and separate enclosure. For a loaded enclosure, check the whole box’s dimensions, not only the speaker diameter.

The available specifications cannot confirm fit in a particular make or model of car, so measure the target space.

RMS power, impedance, and voice coils

Use RMS power and impedance to narrow choices only after checking what your amplifier supports. Crunch CRW12D4 and Hifonics HFX12D4 each list 400W RMS, 4-ohm impedance, and dual voice coils; the Pyle PLPW8D lists 400W RMS with dual 4-ohm coils. BOSS Audio P80DVC lists 500W RMS and dual 4-ohm coils, while the Skar Audio EVL-1X65D4-V-LP is pre-wired for a final 2-ohm load and rated at 200W RMS.

Buyers with a compatible amp can compare those figures directly; shoppers replacing factory audio may find the powered Seventour ST800 more relevant because it supports high- and low-level inputs. Do not treat peak or maximum power as a substitute for RMS, or assume that voice-coil wiring is compatible without checking the amplifier.

Which car subwoofer should you choose?

Choose the Seventour ST800 if you want an active 10-inch under-seat sub with a built-in amp and high- and low-level inputs. The FOLTUSYMY RMS-004 is another slim powered choice, with a listed depth of 2.67 inches. For a ready-loaded enclosure, select the Skar Audio EVL-1X65D4-V-LP and verify its 2-ohm final load suits your system.

If you already have an amplifier and want a 12-inch driver, the Crunch CRW12D4 has a stated 400W RMS rating and supports sealed or vented boxes; the Hifonics HFX12D4 also lists 400W RMS. Choose a Pyle PLPW8D for an 8-inch, 400W RMS driver.

Check dimensions, impedance, enclosure needs, and included components against your installation before ordering.

Frequently Asked Questions

Will a powered under-seat subwoofer work with my factory stereo?

It can, if the subwoofer accepts a signal from your factory stereo and its power and connection requirements fit your vehicle. The Seventour ST800 and FOLTUSYMY listing specify high- and low-level inputs. Confirm your stereo’s outputs, wiring needs, and available under-seat clearance before choosing a unit.

How do I match a subwoofer’s impedance to my amplifier?

Match the subwoofer’s final impedance load to a load your amplifier supports. A dual-voice-coil subwoofer’s wiring configuration affects that final load, so check the driver’s impedance, wiring options, and amplifier manual together. Do not assume a listed coil impedance is the same as the finished system load.

How much enclosure space does a car subwoofer need?

There is no single enclosure size that fits every subwoofer. Check the driver’s installation guidance for enclosure type and internal volume, then compare the enclosure’s external dimensions with the space in your vehicle. For a loaded enclosure, also verify that its complete dimensions and shape fit the intended location.

What should I check before choosing a powered under-seat subwoofer?

Check the unit’s depth against the space beneath your seat, and confirm that its inputs work with your stereo. Also verify power, wiring, and installation requirements for your vehicle. The Seventour ST800 is listed at 2.7 inches deep, while the FOLTUSYMY unit is listed at 2.67 inches.

Do I need a separate amplifier and enclosure?

That depends on what the product includes. The Seventour ST800 is an active unit with a built-in amplifier; bare drivers need a suitable amplifier and enclosure. The Skar Audio option is a loaded enclosure, but you should still check its final impedance and system compatibility before ordering.

Final Words

For an all-in-one, space-conscious choice, the Seventour ST800 is the strongest fit here, provided its 2.7-inch depth clears your under-seat space and its inputs suit your stereo. The FOLTUSYMY is another slim powered option. Choose the loaded Skar enclosure only after checking its 2-ohm final load.

If you already have an amplifier, compare driver size, impedance, enclosure requirements, and stated power ratings before selecting a bare sub.

Leave a Reply

Your email address will not be published. Required fields are marked *