Best Hydraulic Cylinder For Dump Trailer: 10 Options Compared

Best Hydraulic Cylinder For Dump Trailer

A strong dump-trailer cylinder delivers the stroke and lifting arrangement your hoist requires, and suits owners replacing a cylinder or building a lift system. The Magister Hydraulics 6×21.5-inch double-acting cylinder leads this selection with a stated 3,500 PSI maximum pressure and a dump-trailer application. But one size does not fit every trailer: the products here range from compact replacement cylinders to long-stroke telescopic units and complete hoist kits.

Compare bore, stroke, operating pressure where provided, mounting style, and whether the listing is a cylinder alone or a kit. Before ordering, match the existing cylinder’s dimensions and connections, or confirm the hoist maker’s requirements.

The list also includes model-specific and power-up cylinders, which are useful only when their fit matches your trailer.

The Magister 6×21.5 Cylinder is the leading choice for a buyer seeking a standalone dump-trailer hoist cylinder with clear performance specifications. It has a 6-inch bore, 21.5-inch stroke, double-acting design, and a stated maximum pressure of 3,500 PSI. Its steel piston and threaded gland with wear rings, plus a high-tensile honed tube, are specified construction details.

Confirm that its dimensions, mount, and hydraulic connections match your trailer before purchase; the listing does not establish universal compatibility.

Our Top Picks

Magister 6x21.5 CylinderBest Overall

Magister 6×21.5 Cylinder

A dump-trailer hoist cylinder with 6-inch bore, 21.5-inch stroke, double-acting operation, and 3,500 PSI maximum pressure.

View on Amazon
AMRAP 5x20 CylinderBest 5-Inch Bore

AMRAP 5×20 Cylinder

This welded, double-acting dump-hoist cylinder specifies a 5-inch bore, 20-inch stroke, and 3,500 PSI for trailer lifting.

View on Amazon
Magister 12-Ton Telescopic CylinderLongest Stroke

Magister 12-Ton Telescopic Cylinder

Its three-stage telescopic design extends to 152 inches, is rated for 12 tons and 3,000 PSI, and specifies a trunnion mount.

View on Amazon

Compare These Dump-Trailer Cylinder and Hoist Options

#ProductWeightBuy
1119 lbView on Amazon
2
AMRAP 5x20 Cylinder2. AMRAP 5×20 CylinderBest 5-Inch Bore
—View on Amazon
3199 lbView on Amazon
4175 lbView on Amazon
5
Primary Mover 90-Inch Kit5. Primary Mover 90-Inch KitLong-body hoist-only kit
175 lbView on Amazon
6—View on Amazon
7
PartSt 5-Inch Cylinder7. PartSt 5-Inch Cylinder153⁄4-inch-stroke replacement cylinder
—View on Amazon
8
AMPLIPHASE 70044 Cylinder8. AMPLIPHASE 70044 CylinderLoad Trail power-up replacement
—View on Amazon
9
PartSt 3x10 Cylinder9. PartSt 3×10 CylinderCompact 10-inch-stroke cylinder
—View on Amazon
10
MechMaxx DT4X8 Cylinder10. MechMaxx DT4X8 CylinderMechMaxx DT4X8 replacement
52 lbView on Amazon

Detailed Reviews: Best Hydraulic Cylinder For Dump Trailer

Magister 6x21.5 Cylinder

#1 · Best Overall

1. Magister 6×21.5 Cylinder

  • Weight: 119 lb

Best for: Large-bore dump-trailer hoists.

Why it ranks #1: A dump-trailer hoist cylinder with 6-inch bore, 21.5-inch stroke, double-acting operation, and 3,500 PSI maximum pressure.

A 6-inch bore paired with a 21.5-inch stroke gives this Magister Hydraulics double-acting cylinder a clearly specified format for dump-trailer hoist systems. Its 3500 PSI maximum pressure identifies the pressure rating buyers can use when assessing a compatible hydraulic setup, while the double-acting design supports powered movement in both directions.

The high-tensile honed cold-drawn tube provides a specified cylinder construction, and steel pistons with steel threaded glands and wear rings are identified as durability features. Together, those components make this a substantial option for trailer lifting systems rather than a compact, short-stroke replacement. Its 34-by-8-by-8-inch dimensions and 119-pound weight also matter during handling and installation, so buyers should account for the cylinder’s size and mass when planning the hoist arrangement.

Pros
  • 6-inch bore and 21.5-inch stroke are clearly specified
  • Double-acting design for dump-hoist applications
  • Maximum pressure rated at 3500 PSI
  • Steel pistons, threaded glands, and wear rings
Cons
  • At 119 pounds, it is a heavy cylinder to handle during installation.

Skip it if you need a lighter cylinder for frequent solo handling; this model weighs 119 pounds.

Choose this Magister for a dump-trailer hoist that calls for a 6-inch bore, 21.5-inch stroke, and double-acting operation. Its 119-pound weight and stated dimensions are important installation considerations; match the cylinder to your trailer and hydraulic system.

Full product details
BrandMagister Hydraulics
Item Weight‎119 pounds
Item model number‎HTC 6×21.5
Manufacturer‎Magister Hydraulics
Dimensions‎34 x 8 x 8 inches

Listed on Amazon as: Hydraulic Cylinder for Dump Trailer 6" Bore x 21.5" Stroke, 3500 PSI Trailer Hoist Hydraulic Cylinders – Magister Hydraulics Double-Acting Dump Hoist Hydraulic Cylinder

View on Amazon
AMRAP 5x20 Cylinder

#2 · Best 5-Inch Bore

2. AMRAP 5×20 Cylinder

Best for: Double-acting trailer cylinder.

Why it ranks #2: This welded, double-acting dump-hoist cylinder specifies a 5-inch bore, 20-inch stroke, and 3,500 PSI for trailer lifting.

A 5-inch bore and 20-inch stroke give the AMRAP Hydraulics cylinder a defined size for buyers replacing or specifying a dump-trailer hoist. Its 3500 PSI rating and double-acting operation identify key hydraulic requirements, while the welded-steel construction is presented for use on dump trailers, tilt trailers, and agricultural equipment.

The double-acting configuration supports powered movement in both directions, a relevant distinction when matching a cylinder to a trailer’s hoist system. Its 5-by-20-inch bore-and-stroke dimensions and 3500 PSI rating provide concrete specifications for checking the intended setup. The welded-steel design is also described for heavy-duty use, and the listed applications extend to tilt trailers and agricultural equipment, giving buyers more stated use cases than dump trailers alone.

Pros
  • 5-inch bore and 20-inch stroke specified
  • 3500 PSI pressure rating
  • Double-acting hydraulic operation
  • Welded-steel construction for listed heavy-duty applications
Cons
  • The supplied details do not state its retracted length, so installation space is not specified.

Skip it if you need a cylinder with a stated retracted length before planning the installation; those dimensions are not provided here.

This AMRAP cylinder suits buyers specifying a 5-inch-bore, 20-inch-stroke double-acting unit for a dump or tilt trailer. Its 3500 PSI rating is useful for selection, but the supplied information leaves retracted length unspecified for installation planning.

Full product details
BrandAMRAP HYDRAULICS
Item model number‎5020-DHC
Manufacturer‎AMRAP HYDRAULICS

Listed on Amazon as: 5×20 Hydraulic Cylinder for Dump Trailer – 5" Bore x 20" Stroke, 3500 PSI Double Acting Dump Hoist Hydraulic Cylinder, Welded Steel Trailer Hoist Cylinder (5×20)

View on Amazon
Magister 12-Ton Telescopic Cylinder

#3 · Longest Stroke

3. Magister 12-Ton Telescopic Cylinder

  • Weight: 199 lb

Best for: Long-stroke telescopic dump lifts.

Why it ranks #3: Its three-stage telescopic design extends to 152 inches, is rated for 12 tons and 3,000 PSI, and specifies a trunnion mount.

A 108-inch stroke from a three-stage telescopic design gives this Magister cylinder extended lifting reach while retracting to 44 inches. Rated for 12 tons at up to 3000 PSI, it is a single-acting trunnion-mount ram for dump trailers where a long lift and compact retracted length are both relevant.

The three stages provide the stated 108-inch stroke while the 44-inch retracted length helps limit the space occupied at rest. Its trunnion mount and 1.015-inch pin diameter give buyers specific mounting details to compare with their trailer arrangement. A 3.4-gallon oil volume and SAE 8 port help define hydraulic-system requirements, while the listed compatibility includes several trailer brands, including Big Tex, PJ Trailers, and Load Trail.

Pros
  • Three-stage telescopic design with 108-inch stroke
  • 44-inch retracted length
  • 12-ton capacity and 3000 PSI rating
  • Trunnion mount with specified 1.015-inch pin diameter
Cons
  • Single-acting operation does not provide powered retraction.

Skip it if you require powered movement in both directions; this cylinder is specified as single acting.

Consider this Magister for a 12-ton dump trailer needing a long telescopic lift with a 44-inch retracted length. Its single-acting operation and trunnion mounting are important boundaries, so verify those requirements against the existing hoist arrangement.

Full product details
BrandMagister Hydraulics
Item Weight‎199 pounds
Item model number‎TSA12-3.108
Manufacturer‎Magister Hydraulics
Dimensions‎50 x 10 x 10 inches

Listed on Amazon as: Magister Telescopic Hydraulic Cylinder 3 Stage 12 Ton 108 in, Single Acting Hydraulic Ram 3000 PSI, for Dump Trailers, Trunnion Mount (TSA12-3.108)

View on Amazon
Primary Mover 120-Inch Kit

#4 · Highest Capacity

4. Primary Mover 120-Inch Kit

  • Weight: 175 lb

Best for: High-capacity long-body hoists.

Why it ranks #4: The complete telescopic kit specifies a 120-inch stroke and 30-plus-ton capacity for 12- to 16-foot dump bodies.

A 120-inch telescopic stroke and stated capacity above 30 tons make this Primary Mover Standard Kit the group’s long-reach option for 12-to-16-foot dump bodies. Unlike a cylinder-only listing, it includes a high-flow power unit, mounting hardware, hinges, safety prop arm, and load-control components.

The 120-inch stroke and 30-plus-ton capacity address large-body lifting needs, with the specified fit range covering 12-to-16-foot dump bodies. Its carbon-steel cylinder is supplied with a high-flow power unit featuring an upgraded #8 SAE port, linking the lift package to a defined hydraulic connection. The included brackets, heavy-duty hinges, safety prop arm assembly, battery cables, fittings, and load control valve make the scope broad, though the 175-pound kit requires handling planning.

Pros
  • 120-inch telescopic stroke
  • Stated capacity above 30 tons
  • Specified for 12-to-16-foot dump bodies
  • Includes power unit, brackets, hinges, and safety prop arm
Cons
  • At 175 pounds, the kit requires substantial handling during installation.

Skip it if you need a kit below 30 tons for an 8-to-12-foot body; Primary Mover’s 7k-90" kit is listed for that smaller body range.

Choose this Primary Mover kit for a 12-to-16-foot dump body where a 120-inch stroke, over-30-ton capacity, and included power and mounting components suit the project. Its 175-pound weight matters when planning installation and handling.

Full product details
BrandPrimary Mover
ColorBlack
Compatible with Vehicle TypeTrailer
Included ComponentsThe telescopic dump bed kit includes a hydraulic cylinder, high flow power unit with an upgraded #8 SAE port, upper and lower mounting brackets, heavy-duty hinges, safety prop arm assembly, battery cables, rubber strap, fittings, and a load control valve.
Item Dimensions144 x 7 x 7 inches
Item Weight175 pounds
Load Capacity30+ Tons
ManufacturerPrimary Mover
Part NumberZY01
MaterialCarbon Steel
Style NameStandard Kit

Listed on Amazon as: 12K -120" 30+ Ton Lifting Capacity – Telescopic Dump Trailer Hydraulic Cylinder | Standard Kit | – 120" Stroke – Fits 12-16' Dump Body (EF-12-120-SK)

View on Amazon
Primary Mover 90-Inch Kit

#5

5. Primary Mover 90-Inch Kit

  • Weight: 175 lb

Best for: Long-body hoist-only kit.

Why it ranks #5: This hoist-only telescopic kit states a 90-inch stroke, 20-plus-ton capacity, and fit for 8- to 12-foot dump bodies.

A 90-inch telescopic stroke is the defining feature of this Primary Mover hoist-only kit, specified for 8-to-12-foot dump bodies and lifting capacity above 20 tons. Its included upper and lower heavy-duty mounting brackets make it a broader hoist package than a cylinder alone, while the hoist-only designation marks its scope.

The 90-inch stroke and stated 20-plus-ton capacity position the kit for larger dump-body lifting needs, with the listed fit range covering 8-to-12-foot bodies. High-carbon steel construction is specified for the cylinder, and the included upper and lower brackets provide mounting components as part of the package. Buyers should note that this is labeled hoist only: the supplied components do not identify a complete set of every system element needed for a finished installation.

Pros
  • 90-inch telescopic cylinder stroke
  • Rated lifting capacity above 20 tons
  • Specified for 8-to-12-foot dump bodies
  • Includes upper and lower heavy-duty mounting brackets
Cons
  • The listing labels it hoist only, not a complete installation kit.

Skip it if you want the listed complete kit components of Primary Mover’s 12K-120" Standard Kit rather than a hoist-only package.

This Primary Mover suits buyers assembling a hoist for an 8-to-12-foot dump body who need a 90-inch stroke and over-20-ton stated capacity. Its hoist-only scope makes it a poor fit when a complete system package is required.

Full product details
BrandPrimary Mover
ColorBlack
Compatible with Vehicle TypeTrailer, Truck
Included ComponentsHydraulic Cylinder 90", Heavy Duty Mounting Lower and Upper Brackets.
Item Dimensions90 x 7 x 90 inches
Item Weight175 pounds
Load Capacity20+ Tons
ManufacturerPrimary Mover
Part Number90"-TPM
MaterialHigh Carbon Steel
Style NameHoist Only

Listed on Amazon as: 7k -90" Telescopic Dump Trailer Kit 20+ Ton Dumping Capacity – Hydraulic Cylinder – 90" Stroke – Fits 8-12' Dump Body (Hoist Only)

View on Amazon
Primary Mover 3.5x30 Lift Kit

#6 · Complete Lift Kit

6. Primary Mover 3.5×30 Lift Kit

Best for: Direct-push bed lift kit.

Why it ranks #6: The direct-push kit includes installation components and a 3.5-by-30-inch cylinder, with stated capacity from 2 to 6 tons.

A single 3.5-by-30-inch cylinder gives this Primary Mover direct-push kit a defined lifting arrangement for trailer beds from 8 to 16 feet. Its stated capacity ranges from 2 to 6 tons depending on trailer length and overhang, and the complete installation kit is included for buyers seeking more than a cylinder alone.

The 30-inch cylinder stroke and direct-push configuration define the lift approach, while the 8-to-16-foot bed range identifies the listed application span. Capacity varies from 2 to 6 tons with trailer length and overhang, so the same headline range does not represent a single capacity for every setup. Stainless-steel material is specified, and the included complete installation kit can simplify sourcing components, though buyers still need to assess their trailer’s dimensions and load requirements.

Pros
  • Single 3.5-inch-bore, 30-inch cylinder
  • Direct-push lift arrangement
  • Listed for 8-to-16-foot bed lengths
  • Complete installation kit included
Cons
  • Capacity is conditional, ranging from 2 to 6 tons based on bed length and overhang.

Skip it if you need a stated capacity above 6 tons; this kit’s listed range tops out at 6 tons.

Choose this Primary Mover kit for a direct-push trailer-bed lift within the stated 8-to-16-foot range and 2-to-6-ton capacity. Because capacity depends on bed length and overhang, confirm that the applicable range suits your trailer.

Full product details
BrandPrimary Mover
Included ComponentsComplete Installation Kit
ManufacturerPrimary Mover
Part NumberPFK-3530-DP
Manufacturer Warranty DescriptionOne year
MaterialStainless Steel
Model Number3530DP

Listed on Amazon as: Single 3.5" x 30" Cylinder Direct Push Lift Kit | 2T-6T Capacity | Fits 8' to 16' Bed Lengths | Complete Installation Kit Included

View on Amazon
PartSt 5-Inch Cylinder

#7

7. PartSt 5-Inch Cylinder

Best for: 153⁄4-inch-stroke replacement cylinder.

Why it ranks #7: A replacement-style dump-trailer cylinder with a 5-inch bore, 153⁄4-inch stroke, 2-inch rod, and 231⁄2-inch retracted length.

A 5-inch bore paired with a 153⁄4-inch stroke gives this GENERIC dump-trailer cylinder a useful set of core dimensions for replacement selection. The listing also specifies a 2-inch rod, 231⁄2-inch retracted length, and 391⁄4-inch extracted length, letting buyers compare its operating envelope with an existing installation.

The 231⁄2-inch retracted and 391⁄4-inch extracted lengths define the cylinder’s overall range, while the 153⁄4-inch stroke indicates the travel between those states. That combination can help narrow a replacement search when the current cylinder’s dimensions are known. Its 5-inch bore and 2-inch rod provide additional comparison points for the hydraulic assembly. The supplied information identifies a dump-trailer application but does not give a pressure rating or operating configuration.

Pros
  • 5-inch bore specified
  • 153⁄4-inch stroke specified
  • 2-inch rod dimension provided
  • Retracted and extracted lengths both listed
Cons
  • No pressure rating is supplied, limiting pressure-based selection.

Skip it if you need a stated pressure rating to match your hydraulic system; this listing provides none.

This cylinder is worth considering when your dump-trailer replacement search centers on a 5-inch bore, 153⁄4-inch stroke, and the stated overall lengths. Its supplied facts omit a pressure rating, so it does not answer every hydraulic-system selection requirement.

Full product details
BrandGENERIC
Manufacturer‎PartSt
Part Number‎TR-1HY63

Listed on Amazon as: 070013 070013 5 Inch x 15-3/4 Inch x 2 Inch Dump Trailer Hydraulic Cylinder 070013

View on Amazon
AMPLIPHASE 70044 Cylinder

#8

8. AMPLIPHASE 70044 Cylinder

Best for: Load Trail power-up replacement.

Why it ranks #8: Its listed 3-inch bore, 10-inch stroke, and 11⁄4-inch rod suit buyers matching the specified 70044 power-up cylinder dimensions.

Load Trail 70044 fit and a power-up designation make this AMPLIPHASE cylinder a narrowly identified replacement option. Its listed dimensions are a 3-inch bore, 10-inch stroke, and 11⁄4-inch rod, giving owners of the named application concrete measurements to compare before selecting a dump-trailer cylinder.

The Load Trail 70044 reference identifies the intended application, and the power-up designation distinguishes the listed operating type. The 3-inch bore and 10-inch stroke, paired with a 11⁄4-inch rod, offer specific dimensional checks against the existing cylinder. Those details help focus a replacement search, but the supplied listing does not provide overall retracted or extended lengths, pressure rating, or additional mounting dimensions, so the stated measurements do not describe every installation requirement.

Pros
  • Intended for Load Trail 70044
  • Power-up cylinder designation
  • 3-inch bore and 10-inch stroke specified
  • 11⁄4-inch rod dimension provided
Cons
  • Overall retracted and extended lengths are not supplied.

Skip it if you need overall cylinder lengths stated before purchase; this listing provides bore, stroke, and rod dimensions only.

This AMPLIPHASE cylinder suits buyers seeking the listed Load Trail 70044 power-up application with matching 3-by-10-inch dimensions. Its overall lengths are not stated, so buyers needing those measurements for installation must use other fit information.

Full product details
BrandAMPLIPHASE
Manufacturer‎P1st

Listed on Amazon as: 70044 3" x 10" x 1-1/4" Dump Trailer Hydraulic Cylinder (Power Up) Fits/Intended for Load Trail70044

View on Amazon
PartSt 3x10 Cylinder

#9

9. PartSt 3×10 Cylinder

Best for: Compact 10-inch-stroke cylinder.

Why it ranks #9: This listing identifies a 3-by-10-inch dump-trailer cylinder with a 11⁄4-inch rod, but provides few other selection specifications.

A 10-inch stroke and 3-inch bore define this GENERIC dump-trailer cylinder for buyers comparing a compact cylinder’s key dimensions. The listing also specifies a 11⁄4-inch rod and identifies the unit as an “Up” cylinder, giving a short set of concrete details to match against a replacement need.

The 3-inch bore, 10-inch stroke, and 11⁄4-inch rod provide the main dimensional checks for assessing whether this cylinder suits an existing dump-trailer arrangement. Its “Up” designation is another relevant listing detail for buyers replacing that type of cylinder. Because the supplied information does not provide overall retracted or extended lengths, the listed dimensions alone do not describe the full space the cylinder occupies through its travel; confirm the application against the actual installation measurements.

Pros
  • 3-inch bore specified
  • 10-inch stroke specified
  • 11⁄4-inch rod dimension provided
  • Identified as a dump-trailer “Up” cylinder
Cons
  • Overall retracted and extended lengths are not stated.

Skip it if you need stated retracted and extended lengths for installation planning; this listing gives neither measurement.

Consider this GENERIC cylinder when the required dump-trailer unit matches the listed 3-inch bore, 10-inch stroke, and 11⁄4-inch rod. Its overall lengths are unspecified, so it is less informative for installations where those measurements determine fit.

Full product details
BrandGENERIC
Manufacturer‎PartSt

Listed on Amazon as: 070044 070044 3" x 10" x 1-1/4" Dump Trailer Hydraulic Cylinder (Up) 070044

View on Amazon
MechMaxx DT4X8 Cylinder

#10

10. MechMaxx DT4X8 Cylinder

  • Weight: 52 lb

Best for: MechMaxx DT4X8 replacement.

Why it ranks #10: The cylinder is explicitly limited to the MechMaxx DT4X8, making it a narrow fit rather than a general dump-trailer option.

Explicit DT4X8 compatibility is the key differentiator of this MechMaxx hydraulic cylinder, which is listed for MechMaxx products only. At 52 pounds, it is identified as a single replacement cylinder rather than a broad-fit hydraulic part, making the named trailer model central to deciding whether it suits your dump-trailer repair.

The DT4X8 model designation gives owners of that MechMaxx trailer a specific compatibility reference, while the manufacturer’s “MechMaxx products only” note sets a clear boundary for other applications. The package lists one cylinder, so buyers should account for that quantity when planning a repair. Its 50-by-15-by-13-inch package dimensions and 52-pound shipping weight also provide handling and delivery-planning context, but the supplied facts do not state bore, stroke, or pressure.

Pros
  • Explicitly listed for MechMaxx DT4X8
  • MechMaxx-only compatibility note is clear
  • One cylinder supplied
  • 52-pound shipping weight stated
Cons
  • Compatibility is restricted to MechMaxx products.

Skip it if you own a trailer outside the MechMaxx product range; this cylinder is listed only for MechMaxx products.

This is a targeted replacement choice for a MechMaxx DT4X8 owner, not a general-purpose cylinder for other trailer brands. The model-specific restriction is clear, while bore, stroke, and pressure details are not supplied.

Full product details
BrandMechMaxx
Item Weight‎52 pounds
Manufacturer‎MechMaxx
Package Dimensions‎50 x 15 x 13 inches

Listed on Amazon as: Hydraulic Cylinder for MechMaxx DT4X8 Heavy-Duty Dump Trailer

View on Amazon

Avoiding a mismatch that can damage a replacement

A cylinder that bolts into place can still be a poor replacement if its stroke, retracted length, or action differs from the original. The listings show why checking only the bore is risky: the PartSt 5-Inch Cylinder has a 153⁄4-inch stroke and 231⁄2-inch retracted length, while the Magister 6×21.5 Cylinder has a 21.5-inch stroke and double-acting operation. Likewise, the Magister 12-Ton Telescopic Cylinder uses a trunnion mount and three stages, unlike a conventional single ram.

A mismatch can prevent the hoist from reaching its intended travel or attaching correctly. Record the old cylinder’s bore, stroke, closed length, pin dimensions, mounting arrangement, port type, and action before ordering.

The listings do not provide every one of these details for every product, so ask the seller or manufacturer to confirm any missing dimension against your existing setup.

Cylinder-only listings versus complete hoist kits

A cylinder-only listing is not the same purchase as a complete dump-bed hoist kit. The Magister and AMRAP listings describe standalone cylinders, while the Primary Mover 120-Inch Kit includes a cylinder, power unit, brackets, hinges, safety prop arm, cables, fittings, and a load-control valve. The 90-inch Primary Mover option is identified as hoist only and includes mounting brackets, so its included equipment differs from the 120-inch kit.

This distinction matters when planning an installation: a replacement-cylinder buyer may already have a pump and mounting hardware, while a new build may require several system components. Do not assume a cylinder listing includes a pump, controls, hoses, brackets, or other hardware unless the product data says so.

Confirm what is supplied and whether it matches the trailer and power unit before choosing between a standalone ram and a kit.

How to Choose a Dump-Trailer Cylinder

Bore, stroke, and retracted length

Start by matching bore, stroke, and closed length to the existing hoist or its design requirements. The listed standalone options range from the 3-inch-by-10-inch PartSt and AMPLIPHASE cylinders to the 5-inch-bore PartSt and AMRAP models, and the Magister 6-inch-bore cylinder has a 21.5-inch stroke. The PartSt 5-Inch Cylinder also lists a 231⁄2-inch retracted length, a useful fit check.

A replacement buyer should prioritize matching measured dimensions over choosing the largest bore. For a new system, the longer-stroke telescopic options extend to 90 or 120 inches, while the three-stage Magister telescopic cylinder reaches 152 inches; these serve different hoist geometries, not interchangeable mounting positions.

Action, pressure, and mounting style

Choose the action, pressure rating, and mount to match the existing hydraulic circuit and hoist. The Magister 6×21.5 Cylinder is double acting and states a 3,500 PSI maximum; the AMRAP 5×20 Cylinder is also double acting and rated at 3,500 PSI. By contrast, the Magister 12-Ton Telescopic Cylinder is single acting, rated at 3,000 PSI, and uses a trunnion mount.

Those differences affect system fit, so do not treat the ratings or action types as interchangeable. A buyer replacing an existing double-acting ram should favor a confirmed double-acting match; a telescopic replacement should verify mount and pin dimensions.

Several other product listings omit pressure or mounting details, so confirm those before selecting them for a system.

Standalone ram or lift kit

Decide whether you need only a cylinder or a more complete lift arrangement. The Magister and AMRAP products are standalone dump-hoist cylinders, while Primary Mover offers kits with different stroke and stated capacity ranges. Its 90-inch hoist-only kit is specified for 8- to 12-foot dump bodies and over 20 tons; the 120-inch standard kit is specified for 12- to 16-foot bodies and over 30 tons, with a power unit and additional hardware listed.

The 3.5-by-30-inch direct-push kit states a 2- to 6-ton range depending on trailer length and overhang. A buyer replacing a known cylinder may prefer a standalone unit; someone assembling a new setup should compare the supplied components and body-length guidance.

Which Dump-Trailer Cylinder Should You Choose?

For a clearly specified standalone dump-hoist replacement, choose the Magister 6×21.5 Cylinder, provided its dimensions and double-acting circuit match your trailer. The AMRAP 5×20 Cylinder is another double-acting 3,500 PSI option when its smaller bore and stroke suit the setup. For long-stroke telescopic lifting, consider the Magister 12-Ton Telescopic Cylinder and confirm its trunnion mount and 152-inch extended length fit.

Buyers wanting a broader system should compare the Primary Mover 90-Inch Kit for 8- to 12-foot bodies with the Primary Mover 120-Inch Kit for 12- to 16-foot bodies. The Primary Mover 3.5×30 Lift Kit is the listed direct-push option.

For model-specific or dimension-matched replacements, verify fit carefully before ordering.

Frequently Asked Questions

How do I measure a dump-trailer cylinder to find a compatible replacement?

Measure the cylinder’s stroke and its relevant dimensions, including bore where available, and compare them with the existing unit and trailer requirements. Also note the retracted and extended lengths, pin or mount locations, and connection arrangement. Match the hydraulic action and confirm measurements against the trailer before ordering; similar-looking cylinders may not be interchangeable.

What is the difference between single-acting and double-acting dump-trailer cylinders?

A single-acting cylinder is powered hydraulically in one direction, while a double-acting cylinder uses hydraulic pressure to move in both directions. Check which type your trailer’s hydraulic circuit requires before choosing a replacement. Product titles identify some options as single-acting or double-acting, but the title alone does not confirm compatibility with your setup.

How can I verify a cylinder’s mounting style and hydraulic connections before ordering?

Compare the cylinder’s mount type and dimensions with the trailer’s attachment points, and check that its hydraulic connections match the existing lines and circuit. Look for details such as trunnion mounting when listed, but do not assume an unlisted feature. If the listing does not provide enough information, verify the fit with the seller or a qualified technician.

When should I consider a telescopic cylinder for a dump trailer?

Consider a telescopic cylinder when the trailer’s lift arrangement calls for a long-stroke, multi-stage cylinder. Compare the listed stroke or extended length, mounting style, and lifting arrangement with your trailer’s requirements. The 12-ton telescopic option is described as three-stage with a 108-inch listing, while the 120-inch kit is listed for 12- to 16-foot bodies; verify fit before ordering.

How do I choose between a standalone cylinder and a lift kit?

Choose a standalone cylinder when you are replacing a cylinder and have confirmed its dimensions, mount, hydraulic connections, and action match the existing setup. A kit may suit buyers seeking a broader hoist system; compare its stated body-length range and configuration with the trailer. The listed kits have different ranges, so do not assume they fit every trailer.

Final Words

For a standalone replacement with clearly stated performance details, the Magister 6×21.5 is the leading choice when its dimensions, mount, and double-acting circuit match your trailer. Consider the AMRAP 5×20 if its smaller bore and stroke suit the setup, or a telescopic option for long-stroke lifting. If you need a broader system, compare kit ranges with your body length.

Verify mounting and hydraulic connections before ordering any option.

Leave a Reply

Your email address will not be published. Required fields are marked *