A strong RV bumper receiver should match your bumper’s dimensions, provide the right 2-inch receiver opening, and suit the accessory you plan to carry. For most owners adding a bike rack or cargo carrier, the Ohuhu RV Bumper Hitch is a well-equipped starting point: its listed fit is 4-by-4-inch bumpers, and it includes a hitch pin and cover. The options here differ in bumper compatibility, stated capacity, materials, and included hardware, so a higher listed capacity alone does not settle the choice.
Several products explicitly warn against using them for RV-level trailer towing; check the product’s intended use and your RV manufacturer’s bumper limits before installation. This comparison separates the straightforward 4-by-4-inch choices from adjustable or broader-fit designs and lower tongue-weight options.
The Ohuhu RV Bumper Hitch is the leading choice for a typical 4-by-4-inch RV bumper because it has a standard 2-inch receiver opening and includes both a hitch pin and a receiver cover. Its listed maximum towing capacity is 3,500 pounds, but that figure should not be treated as approval for towing a trailer from an RV bumper. Confirm the bumper’s dimensions and load limits, and use the receiver only for an accessory the product and RV allow.
Our Top Picks
Best OverallFits 4-by-4-inch RV or travel-trailer bumpers, has a 3,500-pound listed capacity, and includes a hitch pin and receiver cover.
View on Amazon
Best Included HardwareSpecifies 4-by-4-inch bumper fit and a 3,500-pound listed capacity; its pin and clip are included for use without buying those separately.
View on Amazon
Longest WarrantyFits a 4-by-4-inch RV rear bumper, lists 3,500-pound capacity, and includes a 5/8-inch hitch pin and spring pin.
View on Amazon- Broad Beam Fit YZONA RV Bumper Hitch
- Adjustable Beam Fit Fioracl RV Bumper Hitch
Compare RV Bumper Hitch Options and Their Stated Fits
| # | Product | Maximum Towing Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. Ohuhu RV Bumper HitchBest Overall | 3500 lb | Alloy Steel | Trailer | View on Amazon |
| 2 | 2. TOPSHINE RV Bumper HitchBest Included Hardware | 3500 lb | Carbon Steel | RV | View on Amazon |
| 3 | 3. puxyblue RV Bumper HitchLongest Warranty | 3500 lb | High-quality and high-strength steel | ATV, Car, Lawn Mower, Tractor, Trailer, UTV, Van | View on Amazon |
| 4 | 4. TOPTOW RV Bumper HitchAccessory carrier for 4-inch beams | 3500 lb | Alloy Steel | 4" X 4" RV REAR BUMPER | View on Amazon |
| 5 | 5. METOWARE RV Bumper HitchHigh-capacity 4-inch bumper receiver | 3500 lb | Alloy Steel | Car, RV, Truck | View on Amazon |
| 6 | 6. YZONA RV Bumper HitchBroad Beam Fit | 3500 lb | Carbon Steel | RV | View on Amazon |
| 7 | 7. Fioracl RV Bumper HitchAdjustable Beam Fit | 3500 lb | Alloy Steel | Trailer | View on Amazon |
| 8 | 8. REDTEE RV Bumper HitchDual-size bumper rack receiver | 2000 lb | Carbon Steel | RV | View on Amazon |
| 9 | 9. Nilight RV Bumper Hitch200-pound tongue-load carrier mount | — | Alloy Steel, Carbon Steel | Trailer | View on Amazon |
| 10 | 10. MaxxHaul 50173 HitchLight-duty rack and accessory mount | — | Alloy Steel | RV | View on Amazon |
Detailed Reviews: Best Receiver Hitch For RV Bumper

#1 · Best Overall
1. Ohuhu RV Bumper Hitch
- Maximum Towing Capacity: 3500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Pin-and-cover included accessory mount.
Why it ranks #1: Fits 4-by-4-inch RV or travel-trailer bumpers, has a 3,500-pound listed capacity, and includes a hitch pin and receiver cover.
Ohuhu supplies both a hitch pin and a receiver cover, giving this bumper adapter useful hardware for securing an accessory and closing the opening when it is idle. Its 2-inch receiver can serve bike racks, tire racks, and cargo racks, while the listed no-welding installation avoids a welding step.
The receiver fits a 4-by-4-inch RV or travel-trailer bumper and accepts compatible accessories through its 2-inch opening. A supplied hitch pin addresses the connection, and Ohuhu says the pin helps reduce wobble; the hitch cap covers the opening between uses. E-coat and black powder coating are specified as corrosion protection, which helps guard the steel finish during outdoor storage and travel. The product lists a 3,500-pound maximum towing capacity.
- Hitch pin and hitch cover included
- E-coat and black powder coating
- 2-inch receiver for accessory racks
- No welding required for installation
- Specified bumper fit is limited to 4-by-4-inch RV or travel-trailer bumpers.
Skip it if you have a 2-by-4-inch bumper; the REDTEE receiver lists compatibility with both 2-by-4-inch and 4-by-4-inch beams.
This is a practical match for owners with a 4-by-4-inch bumper who value included pin-and-cover hardware and a coated steel receiver. Its listed bumper fit does not cover 2-by-4-inch beams.
Full product details
| Brand | Ohuhu |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Bumper Hitch Receiver, Hitch Cover, Hitch Pin |
| Manufacturer | Ohuhu |
| Part Number | Y60-81000-26 |
| Manufacturer Warranty Description | 1 Year |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | Y60-81000-23-26 |
Listed on Amazon as: Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin and Hitch Cover
View on Amazon
#2 · Best Included Hardware
2. TOPSHINE RV Bumper Hitch
- Maximum Towing Capacity: 3500 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: RV
Best for: Ready-to-use carbon steel receiver.
Why it ranks #2: Specifies 4-by-4-inch bumper fit and a 3,500-pound listed capacity; its pin and clip are included for use without buying those separately.
The TOPSHINE package includes a pin and clip, so the listed hardware is ready to use without purchasing those accessories separately. Its carbon-steel, powder-coated receiver fits a 4-by-4-inch square bumper and provides a 2-inch opening for adding bike, kayak, luggage, or cargo racks.
The 2-by-2-inch tube opening accepts compatible 2-inch accessories, while the 4-by-4-inch bumper specification identifies the installation target. TOPSHINE lists bike, luggage, kayak, and cargo racks among possible uses, making the receiver relevant to owners seeking rear-mounted storage rather than a single rack type. Carbon steel with a powder-coated finish is specified for rust resistance, and the included pin and clip simplify getting an accessory connection ready.
- Pin and clip included
- Carbon steel with powder coating
- Fits specified 4-by-4-inch bumpers
- 2-inch receiver for varied accessory racks
- Listed bumper compatibility covers 4-by-4-inch beams only.
Skip it if you have a 2-by-4-inch bumper; the REDTEE receiver is listed for both 2-by-4-inch and 4-by-4-inch beams.
Consider TOPSHINE if your RV has a 4-by-4-inch bumper and you want included pin-and-clip hardware for compatible storage or recreation racks. The supplied fit information does not list other bumper sizes.
Full product details
| Brand | TOPSHINE |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | Bolt, Hitch Body |
| Item Weight | 11.5 pounds |
| Manufacturer | TOPSHINE |
| Part Number | 7017 |
| Manufacturer Warranty Description | 1 Year Manufacture |
| Material | Carbon Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 7017 |
Listed on Amazon as: TOPSHINE RV Bumper Hitch Receiver, 2-Inch Adapter, 3500 LBS Capacity
View on Amazon
#3 · Longest Warranty
3. puxyblue RV Bumper Hitch
- Maximum Towing Capacity: 3500 lb
- Material: High-quality and high-strength steel
- Compatible with Vehicle Type: ATV, Car, Lawn Mower, Tractor, Trailer, UTV, Van
Best for: Pin-equipped 4-inch bumper receiver.
Why it ranks #3: Fits a 4-by-4-inch RV rear bumper, lists 3,500-pound capacity, and includes a 5/8-inch hitch pin and spring pin.
Puxyblue includes both a 5/8-inch hitch pin and a spring pin with its receiver, providing two listed pieces of connection hardware in the package. The adapter fits a 4-by-4-inch RV rear bumper and adds a 2-inch opening for connecting compatible accessories.
The specified 4-by-4-inch bumper fit identifies a narrower installation target than models listing multiple beam sizes. Its 2-inch receiver is intended to connect various accessories, while the included hitch pin and spring pin mean those components are supplied with the adapter. Puxyblue lists a 3,500-pound maximum towing capacity and high-strength steel construction. The supplied description does not state a tongue-weight rating, so buyers should not infer one from the gross capacity.
- 5/8-inch hitch pin and spring pin included
- Fits specified 4-by-4-inch RV rear bumper
- 2-inch receiver for accessories
- 3,500-pound maximum towing capacity stated
- No tongue-weight capacity is stated in the supplied specifications.
Skip it if you need a stated tongue-weight limit before selecting; the YZONA receiver specifies 350 pounds, whereas Puxyblue supplies no tongue-weight figure.
This fits an owner with a 4-by-4-inch RV rear bumper who wants the receiver and pin hardware supplied together. Its listed gross capacity does not replace a tongue-weight figure, which is not provided.
Full product details
| Brand | puxyblue |
|---|---|
| Compatible with Vehicle Type | ATV, Car, Lawn Mower, Tractor, Trailer, UTV, Van |
| Included Components | 1x 5/8" Hitch Pin, 1x RV Bumper Hitch Receiver, 1x Spring Pin |
| Item Weight | 5.21 kg |
| Manufacturer | CL-63803 |
| Part Number | 63803 |
| Manufacturer Warranty Description | 2-years warranty |
| Material | High-quality and high-strength steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 63803 |
Listed on Amazon as: [2026 NEW] RV Bumper Trailer Hitch Receiver Adapter by puxyblue Compatible for 4" x 4" RV Rear Bumper – 2" Receiver with 3500 LBS Capacity Connect Various Accessories – 2 Year Warranty
View on Amazon
#4
4. TOPTOW RV Bumper Hitch
- Maximum Towing Capacity: 3500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: 4" X 4" RV REAR BUMPER
Best for: Accessory carrier for 4-inch beams.
Why it ranks #4: Its 2-inch receiver is specified for 4-by-4-inch bumpers and has a 350-pound tongue capacity, though the seller warns against RV-level trailer towing.
TOPTOW explicitly warns that this 4-by-4-inch bumper receiver is not intended for RV-level trailer towing, making its intended role clear: adding a 2-inch mounting point for bike racks or cargo carriers. The 350-pound tongue-weight rating and upside-down mounting option help define its carrying setup.
Its 2-by-2-inch tube opening fits many accessories with a 2-inch shank, while the specified 4-by-4-inch bumper fit narrows the installation target. TOPTOW says it can mount upside down and calls for bolts to be secured tightly around the travel-trailer bumper, so installation orientation and fastening matter. A 5/8-inch hitch pin or lock is not included; plan to supply that hardware for the accessory connection.
- 2-by-2-inch receiver for 2-inch-shank accessories
- Specified fit for 4-by-4-inch square bumpers
- Can be mounted upside down
- 350-pound tongue-weight capacity
- Not intended for RV-level trailer towing; hitch pin or lock is not included.
Skip it if you need included pin hardware or a receiver for RV-level trailer towing; the Ohuhu includes a pin, while this model expressly excludes that towing use.
Choose this for mounting compatible bike racks or cargo carriers on a 4-by-4-inch RV bumper, including where upside-down orientation helps. It is not an RV-level trailer-towing receiver, and pin hardware is separate.
Full product details
| Brand | TOPTOW |
|---|---|
| Compatible with Vehicle Type | 4" X 4" RV REAR BUMPER |
| Item Weight | 4.45 kg |
| Manufacturer | TOPTOW |
| Part Number | 63803 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | TTRV801 |
Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in x 4in Beams,2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on, 3500lbs
View on Amazon
#5
5. METOWARE RV Bumper Hitch
- Maximum Towing Capacity: 3500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, RV, Truck
Best for: High-capacity 4-inch bumper receiver.
Why it ranks #5: Offers a 2-inch receiver and 350-pound tongue capacity with a listed 3,500-pound maximum, but its fit description specifies a 4-inch square bumper.
A 3,500-pound maximum towing capacity paired with a 350-pound tongue-weight rating gives the METOWARE receiver a clearly stated load envelope for RV bumper setups. Its 2-inch receiver opening accepts many Class III/IV ball mounts and other compatible accessories, letting owners add a familiar attachment point for selected towing or carrying tasks.
The receiver is specified for a 4-inch square bumper and uses a 2-by-2-inch opening, connecting the bumper-mounted adapter with common 2-inch-shank accessories. The 350-pound tongue-weight rating addresses downward load, while the 3,500-pound maximum towing capacity defines a separate gross limit; neither should be treated as permission to exceed the lowest-rated component. Alloy steel construction supplies the stated heavy-duty material choice for RV, car, or truck applications.
- 3,500-pound maximum towing capacity
- 350-pound tongue-weight capacity
- 2-by-2-inch receiver opening for common accessories
- Alloy steel construction
- Supplied details do not specify included hitch-pin hardware.
Skip it if you need a stated anti-wobble pin or included cover; the Ohuhu receiver lists a hitch pin and hitch cover.
This suits an RV owner with a 4-inch square bumper seeking a 2-inch accessory receiver and clearly stated load ratings. Match the bumper and keep every attached component within its own rating.
Full product details
| Brand | METOWARE |
|---|---|
| Compatible with Vehicle Type | Car, RV, Truck |
| Included Components | 1*rv bumper hitch receiver |
| Manufacturer | METOWARE |
| Part Number | 79961 |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 79961 |
Listed on Amazon as: RV Bumper Hitch Receiver Fits 4" Square Bumper, 3500 LBS Capacity
View on Amazon
#6 · Broad Beam Fit
6. YZONA RV Bumper Hitch
- Maximum Towing Capacity: 3500 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: RV
Best for: Higher tongue-rating accessory receiver.
Why it ranks #6: The listing describes fit for rear beams from 2 to 4 inches and gives 3,500-pound maximum and 350-pound tongue capacities.
YZONA lists a 350-pound maximum tongue weight alongside a 3,500-pound maximum gross trailer weight, giving this receiver clearly stated capacity figures. Its compatibility range covers 2-to-4-inch rear beams, while the 2-inch opening is aimed at accessories including cargo carriers, bike racks, tire carriers, and ball mounts.
The broad 2-to-4-inch beam range can suit owners whose rear bumper dimensions fall outside a single fixed-size listing. High-strength carbon steel and a black corrosion-resistant coating are specified, supporting use in an outdoor RV setting. The 2-inch receiver accommodates named accessory types, and the 350-pound tongue limit helps frame vertical load selection; the lowest-rated component still governs any installed setup. Included components are listed as the tow hitch.
- Fits listed 2-to-4-inch rear beams
- 350-pound tongue-weight capacity
- 3,500-pound maximum gross trailer weight
- Black coating specified for corrosion resistance
- Included components list only the hitch, not a pin or cover.
Skip it if you need a hitch pin and cover in the package; the Ohuhu receiver includes both, while YZONA lists only the hitch.
YZONA suits RV owners needing a 2-inch accessory receiver across a 2-to-4-inch beam range with stated load limits. The supplied package lists the hitch only, so plan around the included-hardware detail.
Full product details
| Brand | YZONA |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | Tow HITCH |
| Item Weight | 5.74 kg |
| Manufacturer | YZONA |
| Part Number | Y-XBTH-0012-FBA |
| Material | Carbon Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | RV Bumper 2" Trailer Hitch Receiver |
Listed on Amazon as: RV Bumper Hitch Receiver, 2" Tow Hitch Trailer, 3500 LBS Capacity Fits 2 inch to 4 inch Rear Beams, Towing Adapter Openning for Camper Cargo Carrier Bike Racks RV Tire Carrier Ball Mounts
View on Amazon
#7 · Adjustable Beam Fit
7. Fioracl RV Bumper Hitch
- Maximum Towing Capacity: 3500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Adjustable-width beam accessory mount.
Why it ranks #7: Its adjustable design is described for beams 2.5 to 4 inches wide, with a 2-inch receiver and 3,500-pound listed capacity.
Fioracl’s adjustable design is specified for differing steel-beam widths and heights, with a locking adjustment intended to hold the beam tightly and limit movement. That flexibility distinguishes it from receivers listed for one bumper size, while its standard 2-inch opening accepts many common rack and carrier accessories.
The receiver is listed for 2.5-to-4-inch beams, and the adjustable locking arrangement is described as accommodating different beam widths and heights. That can help owners whose bumper dimensions do not match a single fixed-width listing, while the 2-by-2-inch opening supports bike racks, cargo carriers, hitch steps, and RV tire racks with compatible shanks. Alloy steel is the stated material. The supplied information gives a 3,500-pound maximum towing capacity.
- Adjustable for differing beam widths and heights
- Listed for 2.5-to-4-inch beams
- 2-inch receiver for common accessory types
- 3,500-pound maximum towing capacity
- Supplied details do not state a tongue-weight capacity.
Skip it if you require a stated tongue-weight limit before choosing; the METOWARE listing specifies 350 pounds, while Fioracl supplies no tongue-weight figure.
Fioracl is worth considering when beam dimensions vary and an adjustable lock is useful for mounting compatible racks or steps. Its supplied specifications do not state a tongue-weight capacity, so weigh that information gap.
Full product details
| Brand | Fioracl |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Item Weight | 4.7 kg |
| Manufacturer | Fioracl |
| Part Number | BXGLJQ2 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 3500 pounds |
| Model Number | 0442b2a0-e3fb-494b-bc49-3f8ce75f491c |
Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks
View on Amazon
#8
8. REDTEE RV Bumper Hitch
- Maximum Towing Capacity: 2000 lb
- Material: Carbon Steel
- Compatible with Vehicle Type: RV
Best for: Dual-size bumper rack receiver.
Why it ranks #8: Fits both 4-by-4-inch and 2-by-4-inch bumpers and lists 200-pound tongue capacity; the listing says it is not intended for towing.
REDTEE lists compatibility with both 2-by-4-inch and 4-by-4-inch RV bumpers, allowing this receiver to serve two common beam sizes from one model. Its 2-inch opening is intended for bike racks, cargo carriers, and other accessories, with a hitch pin included for the connection.
The bolt-on installation is described as requiring no drilling or modification, which can simplify mounting on a compatible bumper. A 200-pound tongue-weight rating and 2,000-pound maximum towing capacity are listed, but the product explicitly says it is not intended for towing; treat it as an accessory mount rather than a trailer-towing solution. Carbon steel construction and an included hitch pin round out the supplied details, while the title also identifies a hitch cover.
- Fits listed 2-by-4-inch and 4-by-4-inch bumpers
- Bolt-on installation without drilling or modification
- Hitch pin included
- 2-inch receiver for racks and carriers
- Explicitly not intended for towing; tongue-weight capacity is 200 pounds.
Skip it if you need a 350-pound tongue-weight rating; the YZONA receiver specifies 350 pounds, while REDTEE lists 200 pounds and excludes towing.
Pick REDTEE when bumper size flexibility and no-drill bolt-on installation matter for carrying compatible accessories. Its 200-pound tongue limit and explicit no-towing warning make the intended use boundary important.
Full product details
| Brand | REDTEE |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | Hitch Pin |
| Manufacturer | M&H Products |
| Part Number | 701028 |
| Manufacturer Warranty Description | 1 Year Manufacture |
| Material | Carbon Steel |
| Maximum Towing Capacity | 2000 pounds |
| Model Number | 701028 |
Listed on Amazon as: RV Bumper Hitch Receiver with Hitch Cover, Fits Various Beams
View on Amazon
#9
9. Nilight RV Bumper Hitch
- Material: Alloy Steel, Carbon Steel
- Compatible with Vehicle Type: Trailer
Best for: 200-pound tongue-load carrier mount.
Why it ranks #9: Its 2-inch receiver is listed for 4-to-4.5-inch beams and a 200-pound tongue limit, below the higher tongue capacities of several alternatives.
Nilight states both a 2,000-pound gross trailer-weight limit and a 200-pound tongue-weight limit, giving buyers two distinct figures for assessing this receiver. Its 2-inch opening is intended for common bike racks and cargo carriers with a 2-inch shank, on specified 4-to-4.5-inch beams.
The listed beam range of 4 to 4.5 inches differs from a single-size bumper fit, so it gives owners a defined measurement window for selecting this bolt-on receiver. The 2-by-2-inch opening supports compatible rack shanks, while alloy and carbon steel are the stated materials. Nilight also identifies the tongue limit as subject to the lowest-rated towing component, a useful constraint when pairing a rack or other equipment.
- Fits listed 4-to-4.5-inch beams
- 2-inch receiver for compatible accessories
- 200-pound tongue-weight limit stated
- 2,000-pound gross trailer-weight limit stated
- 200-pound tongue-weight limit is lower than 350-pound-rated options.
Skip it if you need a 350-pound tongue-weight rating; the METOWARE receiver specifies 350 pounds, compared with Nilight's 200-pound limit.
Nilight suits an owner whose measured beam falls within 4 to 4.5 inches and who needs a 2-inch accessory mount. Check the attached equipment against the 200-pound tongue limit and lowest-rated component.
Full product details
| Brand | Nilight |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Bumper Hitch Receiver |
| Item Weight | 3.76 kg |
| Manufacturer | Nilight |
| Part Number | 92116B |
| Manufacturer Warranty Description | 2 Years Warranty |
| Material | Alloy Steel, Carbon Steel |
| Model Number | 92116B |
Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers
View on Amazon
#10
10. MaxxHaul 50173 Hitch
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Light-duty rack and accessory mount.
Why it ranks #10: Fits 4-inch square RV bumpers and accepts 2-inch shanks, but its 200-pound tongue capacity is lower and the listing cautions against trailer towing.
A 200-pound tongue-weight capacity sets the MaxxHaul 50173 apart as a lower-rated option for accessories on a 4-inch square RV bumper. Its 2-by-2-inch receiver accepts 2-inch-shank items such as bike racks, RV tire carriers, and hitch steps, adding a mounting point for those uses.
The all-steel construction is described as durable and rust resistant, while the universal 2-inch shank compatibility accommodates several named accessory types. That combination can help owners choose among a bike rack, tire carrier, or step without changing receiver size. The 200-pound tongue-weight limit is central to the decision: the supplied description cautions against RV-level trailer towing and cargo-carrier use, so this is not a general-purpose towing solution.
- 200-pound tongue-weight rating stated
- 2-inch receiver accepts compatible shanks
- Works with bike racks, tire carriers, and hitch steps
- All-steel construction described as rust resistant
- Not intended for RV-level trailer towing or cargo-carrier use.
Skip it if you need a 350-pound tongue-weight rating or cargo-carrier use; the TOPTOW receiver lists 350 pounds and cargo carriers, but also excludes RV-level towing.
This fits owners seeking a 2-inch mount for a bike rack, tire carrier, or hitch step on a 4-inch square RV bumper. Keep its 200-pound tongue limit and stated use restrictions in view.
Full product details
| Brand | MAXXHAUL |
|---|---|
| Compatible with Vehicle Type | RV |
| Included Components | 50173 |
| Manufacturer | MaxxHaul |
| Part Number | 50173 |
| Manufacturer Warranty Description | 90 days |
| Material | Alloy Steel |
| Model Number | 50173 |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers
View on AmazonAvoid confusing a receiver rating with RV approval
A receiver’s listed capacity does not by itself establish that an RV bumper can safely carry an accessory or tow a trailer. The listings show why the distinction matters: TOPTOW states a 3,500-pound maximum and 350-pound tongue capacity, yet explicitly says it is not intended for RV-level trailer towing. MaxxHaul also cautions against trailer towing, while REDTEE says its hitch is not intended for towing and lists a 200-pound tongue capacity.
Treat these figures as product-listed limits, not proof that your bumper, frame, or chosen use is approved. Check your RV maker’s bumper and accessory guidance, include the weight of the rack and its load, and follow the receiver’s installation instructions.
If the intended use is trailer towing, do not assume a bumper-mounted accessory receiver is suitable merely because a listing gives a towing-capacity number.
Check bumper dimensions before choosing a fit
Measure the bumper’s cross-section and compare it with the hitch’s stated fit before ordering. Many options specify 4-by-4-inch bumpers, including Ohuhu RV Bumper Hitch and TOPSHINE RV Bumper Hitch, while METOWARE RV Bumper Hitch describes a 4-inch square bumper. Some listings cover a different range: REDTEE RV Bumper Hitch says it fits 4-by-4-inch and 2-by-4-inch bumpers, and Fioracl RV Bumper Hitch describes an adjustable fit for beams from 2.5 to 4 inches.
Those broader descriptions do not eliminate the need to verify the actual mounting arrangement, clearance, and hardware. Also distinguish the bumper size from the receiver opening: these products commonly offer a 2-inch-by-2-inch receiver for accessory shanks.
A rack that fits the receiver does not make an incompatible bumper mounting fit safe.
How to Choose an RV Bumper Receiver Hitch
Bumper dimensions and mounting fit
Look for an explicit fit that matches the measured bumper, not just a familiar 2-inch receiver opening. Ohuhu RV Bumper Hitch and TOPSHINE RV Bumper Hitch specify 4-by-4-inch bumpers; METOWARE RV Bumper Hitch says 4-inch square. REDTEE RV Bumper Hitch lists both 4-by-4-inch and 2-by-4-inch fits, while Fioracl RV Bumper Hitch describes an adjustable 2.5-to-4-inch beam fit.
TOPTOW RV Bumper Hitch specifies 4-by-4-inch beams and says it can mount upside down. A conventional 4-by-4-inch bumper favors the explicitly matched options, while an unusual beam size may make the broader-fit descriptions worth examining.
Confirm dimensions and mounting instructions before relying on a claimed universal or adjustable fit.
Capacity and intended accessory
Look at tongue capacity and intended use alongside any maximum towing-capacity figure. METOWARE RV Bumper Hitch and TOPTOW RV Bumper Hitch list 350-pound tongue capacity; Ohuhu RV Bumper Hitch, TOPSHINE RV Bumper Hitch, and puxyblue RV Bumper Hitch list 3,500-pound maximum towing capacity. MaxxHaul 50173 Hitch and Nilight RV Bumper Hitch list 200-pound tongue capacity, and REDTEE RV Bumper Hitch lists 200 pounds.
Those numbers do not establish what an RV bumper can support, and some listings explicitly caution against trailer towing. Buyers carrying a light accessory should focus on the actual loaded accessory weight and RV guidance; anyone considering a heavier setup should verify all relevant component limits rather than selecting by the largest advertised number.
Included pins, cover, and material
Check what hardware comes in the box and whether the listed material suits your preference. Ohuhu RV Bumper Hitch includes a hitch pin and cover; TOPSHINE RV Bumper Hitch includes a pin and clip, and puxyblue RV Bumper Hitch includes a 5/8-inch hitch pin and spring pin. Other listings vary: TOPTOW RV Bumper Hitch says its hitch pin or lock is not included.
Material descriptions also differ, with steel or alloy steel listed for several choices and carbon steel specified for TOPSHINE RV Bumper Hitch and REDTEE RV Bumper Hitch. Ohuhu RV Bumper Hitch describes E-coat and black powder coating.
Buyers who want to mount the receiver immediately may favor a listing with the needed pin, while those already owning compatible hardware may care more about bumper fit and load limits.
Which RV Bumper Receiver Hitch Should You Choose?
For a standard 4-by-4-inch bumper and a receiver for an accessory, choose Ohuhu RV Bumper Hitch for its specified fit, 2-inch opening, included pin, and cover. TOPSHINE RV Bumper Hitch is another direct-fit choice and includes a pin and clip. If you want a hitch pin and spring pin supplied, consider puxyblue RV Bumper Hitch, which also specifies 4-by-4-inch fit.
For a 2-by-4-inch bumper, REDTEE RV Bumper Hitch is the listed option that specifically includes that size, but note its 200-pound tongue limit and no-towing warning. Fioracl RV Bumper Hitch describes an adjustable beam fit; check its dimensions against your bumper.
Do not choose by maximum towing capacity alone: confirm RV limits and accessory weight, and avoid trailer towing where the listing rules it out.
Related Buying Guides
- Best Receiver Hitch For RV
- Best Step Bumper Receiver Hitch
- Best RV Bumper Hitch Adapter
- Best Trailer Hitch Receiver
- Best Receiver Hitch For Tractor
- Best Step For Receiver Hitch
Frequently Asked Questions
How can I confirm my RV bumper can support a receiver-mounted rack or carrier?
Check the RV and bumper documentation for permitted loads and confirm the bumper’s dimensions match the hitch listing. Then account for the hitch, accessory, and cargo together, including how far the load extends from the bumper. If the limits or fit are unclear, ask the RV or hitch manufacturer before installing or loading it.
Can an RV bumper receiver be used to tow a trailer?
Only if the hitch listing and RV manufacturer explicitly allow trailer towing for that installation, and the bumper and vehicle limits support the load. A stated maximum towing capacity alone does not confirm that an RV bumper is approved for towing. Some listings rule out towing, so check their instructions and warnings first.
How do I account for accessory weight and leverage when loading a bumper receiver?
Include the receiver-mounted accessory and everything carried on it when checking the applicable load limits. A load that extends farther behind the bumper creates more leverage, so do not assume a listed capacity covers every arrangement. Follow the hitch and RV instructions, and leave margin rather than loading to a limit you cannot verify.
How do I choose a hitch for a bumper that is not 4 by 4 inches?
Measure the bumper and compare its dimensions with the product’s stated fit range before choosing. The listed options include a hitch specifically described for a 2-by-4-inch bumper and others that describe adjustable or varied beam fits. Confirm the exact dimensions and installation requirements with the product information rather than assuming a broad range guarantees compatibility.
What limits should I check besides the hitch’s maximum towing capacity?
Check the RV and bumper’s permitted load, the receiver hitch’s stated limits, and any accessory-specific instructions. For example, the REDTEE listing specifies a 200-pound tongue limit and warns against towing. These figures and warnings are product-specific; do not treat one hitch’s capacity as the limit for another hitch or your RV.
Final Words
For a standard 4-by-4-inch RV bumper and an accessory, the Ohuhu is the leading choice: its stated fit, 2-inch receiver, hitch pin, and cover make the decision straightforward. TOPSHINE and puxyblue are other direct-fit options, with puxyblue listing a hitch pin and spring pin. For a 2-by-4-inch bumper, consider REDTEE, while noting its 200-pound tongue limit and no-towing warning.
Verify bumper limits and accessory load before use.


