Best Steel Ramps For Trucks for Service and Loading

Best Steel Ramps For Trucks

A strong choice among the Best Steel Ramps For Trucks delivers a capacity suited to the vehicle, a usable width and lift or loading height, and traction appropriate to the job. For servicing heavy trucks, the Mytee Products truck service ramps lead this group with a listed 40,000-pound capacity per pair and a non-skid rubber base. For loading motorcycles, mowers, or other equipment into a pickup, long steel ramps are the better match, but their lower capacities make careful load checks essential.

This roundup includes both service ramps and loading ramps, which are not interchangeable. Compare the stated capacity, dimensions, and material against your vehicle and intended task before choosing.

Product descriptions do not establish compatibility with every truck, tire, or loading setup.

Mytee Products truck service ramps lead this roundup for heavy-vehicle maintenance. They are listed at 20 tons, or 40,000 pounds, and include a diamond-tread surface, non-skid rubber base, retractable handle, and caster wheels. Those features suit a buyer seeking truck service ramps that can be repositioned in a shop.

They are not loading ramps for driving equipment into a pickup; for that job, choose a long loading-ramp pair and verify its capacity and fit instead.

Our Top Picks

Mytee Products service rampsBest Overall

Mytee Products service ramps

The pair is rated at 20 tons or 40,000 pounds and includes diamond tread, a non-skid rubber base, caster wheels, and a retractable handle.

View on Amazon
OTC TR2010 rampsBest Shop Handling

OTC TR2010 ramps

These 20-ton truck ramps have 5-inch wheels and a retractable 33-inch handle; check the stated 10-inch width limit against the tires.

View on Amazon
Garvee steel car rampsTallest Service Lift

Garvee steel car ramps

Solid alloy-steel ramps provide an 8-inch lift and 8,000-pound total capacity for compatible cars, trucks, or SUVs needing underbody access.

View on Amazon

Compare these steel ramps by use, capacity, and fit

#ProductDimensionsLoad CapacityMaterialBuy
110"L x 10"W x 10"H20 tons—View on Amazon
2
OTC TR2010 ramps2. OTC TR2010 rampsBest Shop Handling
47"L x 13.5"W x 9.25"H20 TonStainless SteelView on Amazon
3
Garvee steel car ramps3. Garvee steel car rampsTallest Service Lift
37"L x 13"W x 11"H8000 lbAlloy SteelView on Amazon
4
TOLGORN steel ramps4. TOLGORN steel rampsRoutine garage service
35"L x 12"W x 9.5"H8000 lbIronView on Amazon
5
Evcitn 75-inch ramps5. Evcitn 75-inch rampsLongest Loading Pair
78.7"L x 47.2"W x 7.5"H1500 lbIron, Metal, Plastic, Stainless SteelView on Amazon
6
Arejonner steel loading ramps6. Arejonner steel loading rampsTraction-focused equipment loading
70.86"L x 8.66"W x 1.57"H1500 lbAlloy SteelView on Amazon
7
Temushom folding ramps7. Temushom folding rampsLong folding truck-bed access
83"L x 9"W x 1.9"H1000 lbAlloy SteelView on Amazon
8
ELECHOI folding ramps8. ELECHOI folding rampsFold-away light equipment loading
77"L x 9"W x 2"H1000 lbCarbon SteelView on Amazon
9
PioneerWorks steel ramps9. PioneerWorks steel rampsDrainable steel loading surface
76.38"L x 9.06"W x 1.97"H1000 lb—View on Amazon
10
MAXXHAUL 50515 ramps10. MAXXHAUL 50515 rampsUnderbody access for maintenance
35.5"L x 12"W x 8.25"H3,250 lbs per ramp; 6,500 lbs per pairPlasticView on Amazon

Detailed Reviews: Best Steel Ramps For Trucks

Mytee Products service ramps

#1 · Best Overall

1. Mytee Products service ramps

  • Dimensions: 10"L x 10"W x 10"H
  • Load Capacity: 20 tons

Best for: Heavy truck shop service.

Why it ranks #1: The pair is rated at 20 tons or 40,000 pounds and includes diamond tread, a non-skid rubber base, caster wheels, and a retractable handle.

A 20-ton, or 40,000-pound, capacity sets the Mytee Products ramps apart for heavy-vehicle service, including the listed use on trucks, buses, and forklifts. Diamond tread, a non-skid rubber base, and caster wheels bring traction and positioning features to a substantial steel ramp.

Each ramp measures 45-5/8 inches long by 14-1/2 inches wide and stands 9-5/8 inches high, giving heavy-vehicle operators defined dimensions for shop placement and access. The diamond-tread surface is specified as non-slip, while the rubber base is described as non-skid to help stabilize loading. Caster wheels and a retractable handle support moving and positioning the ramps, although their 20-ton rating still requires attention to the vehicle and loading setup.

Pros
  • 20-ton/40,000-pound capacity
  • Diamond-tread, non-slip surface
  • Non-skid rubber base
  • Retractable handle and caster wheels
Cons
  • The 9-5/8-inch ramp height provides less lift than an 8-inch-plus service rise might suggest only by measurement; no greater height is specified.

Skip it if you need a specified lift taller than 9-5/8 inches; Garvee zn3Zunmcuo6i1UE37079Pg4v lists an 8-inch lift, so compare actual height needs carefully.

A fit for shops servicing heavy trucks or similar listed equipment, especially where caster wheels and a retractable handle ease positioning. Its 9-5/8-inch height and ramp dimensions remain important checks for the intended vehicle and workspace.

Full product details
BrandMytee Products
ColorBlue
Dimensions10"L x 10"W x 10"H
Load Capacity20 tons
ManufacturerMytee Products
Part NumberTSRAMPx2-PK
Manufacturer Warranty DescriptionNot applicable.
Model NumberTSRAMPx2-PK

Listed on Amazon as: Mytee Products 1 Pair 20 Ton Heavy Duty Truck Service Ramp – Steel Truck Lift Ramp with Diamond Tread, Non-Skid Rubber Base, Retractable Handle & Caster Wheels for Repairs, Maintenance & Oil Changes

View on Amazon
OTC TR2010 ramps

#2 · Best Shop Handling

2. OTC TR2010 ramps

  • Dimensions: 47"L x 13.5"W x 9.25"H
  • Load Capacity: 20 Ton
  • Material: Stainless Steel

Best for: Semi-truck shop positioning.

Why it ranks #2: These 20-ton truck ramps have 5-inch wheels and a retractable 33-inch handle; check the stated 10-inch width limit against the tires.

Five-inch heavy-duty wheels let OTC's 20-ton truck ramps move around the shop floor, while a 33-inch retractable T-handle aids positioning. Their 10-inch width targets semi-trucks, tractor-trailers, and other heavy vehicles with wheel widths under 10 inches.

The pair's 20-ton capacity and stainless-steel construction suit the heavy-duty vehicle category stated in the product details. For setup, the 5-inch wheels raise each ramp for shop-floor movement, and the 33-inch T-handle retracts into the body to remove a protruding handle during use. The wheels recess into the ramp body while operating, and non-skid rubber matting underneath is specified to help prevent slippage during loading and unloading.

Pros
  • 20-ton pair capacity
  • 5-inch wheels for shop-floor movement
  • 33-inch retractable T-handle
  • Non-skid rubber matting underneath
Cons
  • The 10-inch ramp width is specified for wheel widths under 10 inches.

Skip it if you need ramps for wheels 10 inches wide or more; Mytee Products TSRAMPx2-PK lists a 14-1/2-inch ramp width.

This pair suits heavy-truck shops that need wheeled positioning and a retracting handle, provided the vehicle's wheel width is under 10 inches. Its 230-pound listed weight also matters when planning storage and handling.

Full product details
BrandOTC
ColorBlue
Included ComponentsItem
Dimensions47"L x 13.5"W x 9.25"H
Item Weight230 pounds
Load Capacity20 Ton
ManufacturerOTC Tools
Part NumberTR2010
Manufacturer Warranty DescriptionLifetime warranty does not cover abuse.
MaterialStainless Steel
Model NumberTR2010

Listed on Amazon as: OTC TR2010 20-ton Truck Loading Ramps (Pair)

View on Amazon
Garvee steel car ramps

#3 · Tallest Service Lift

3. Garvee steel car ramps

  • Dimensions: 37"L x 13"W x 11"H
  • Load Capacity: 8000 lb
  • Material: Alloy Steel

Best for: Elevated garage maintenance.

Why it ranks #3: Solid alloy-steel ramps provide an 8-inch lift and 8,000-pound total capacity for compatible cars, trucks, or SUVs needing underbody access.

An 8-inch lift gives the Garvee solid-steel ramps useful clearance for oil changes, tire rotations, inspections, and general repairs. Their stated 8,000-pound total capacity covers a range of cars, trucks, and SUVs, while the two-ramp format provides a straightforward setup for routine vehicle service.

The 37-by-13-inch footprint and alloy-steel construction make these ramps a substantial option for a home service area, and the stated 2,000-pound capacity per ramp clarifies the individual rating. An 8-inch rise creates room to reach underneath for listed maintenance tasks without adding a separate lift. They weigh 32.7 pounds, so positioning takes more effort than with a lightweight ramp; plan storage and handling around their steel construction and dimensions.

Pros
  • 8-inch lift height for underbody access
  • 8,000-pound stated total capacity
  • Alloy-steel construction
  • Listed for cars, trucks, and SUVs
Cons
  • Each ramp is rated for 2,000 pounds, below the pair's 8,000-pound total capacity.

Skip it if you need ramps rated above 2,000 pounds per ramp; Mytee Products TSRAMPx2-PK lists a 20-ton capacity.

For owners doing oil changes, inspections, or other basic service on a compatible car, truck, or SUV, the Garvee offers an 8-inch working rise. Check the per-ramp rating and plan for its 32.7-pound steel construction.

Full product details
BrandGarvee
ColorBlue
Dimensions37"L x 13"W x 11"H
Item Weight32.7 pounds
Load Capacity8000 pounds
ManufacturerGarvee
Part NumberOzf370792GNiR_R5Ork6gwkjcv
MaterialAlloy Steel
Model Numberzn3Zunmcuo6i1UE37079Pg4v

Listed on Amazon as: Garvee 8 Inch Lift Solid Steel Car Ramps, 8000 LBS, Heavy Duty Auto Truck Ramps for Oil Change and Car Repair Vehicle Service Ramps for Car Truck SUV Repair Maintenance, 2 Pack

View on Amazon
TOLGORN steel ramps

#4

4. TOLGORN steel ramps

  • Dimensions: 35"L x 12"W x 9.5"H
  • Load Capacity: 8000 lb
  • Material: Iron

Best for: Routine garage service.

Why it ranks #4: The solid-steel pair is rated for 8,000 pounds and provides a 9-inch internal tire track, making tire-width and clearance checks essential.

A 9-inch internal tire track width is the key fit detail on TOLGORN's solid-steel ramps, making tire-width measurement central to choosing them. The pair is rated for 8,000 pounds total and provides 9.5 inches of height for oil changes, inspections, and general underbody service.

The 35-by-12-inch ramps use iron construction, with each ramp rated at 4,000 pounds; that per-ramp figure helps clarify how the pair's 8,000-pound rating applies during setup. Their 9-inch internal track width makes tire section width an important compatibility check before loading. At 9.5 inches high, they provide clearance for the listed maintenance tasks, while the traction-hole surface offers a specified grip feature for vehicle loading.

Pros
  • 8,000-pound capacity per pair
  • 4,000-pound rating per ramp
  • 9-inch internal tire track width is specified
  • Traction-hole surface
Cons
  • The 9-inch internal track width limits suitability for tires wider than that measurement.

Skip it if you have tires wider than the 9-inch internal track; Mytee Products TSRAMPx2-PK lists a 14.5-inch ramp width.

Choose these for routine oil changes or inspections when the vehicle's tire width fits the 9-inch internal track and its load is within the per-ramp rating. The 9.5-inch height gives a practical service rise.

Full product details
BrandTOLGORN
ColorBlue
Dimensions35"L x 12"W x 9.5"H
Item Weight32.1 pounds
Load Capacity8000 pounds
ManufacturerTOLGORN
Manufacturer Warranty DescriptionChina.
MaterialIron
Model NumberE-GJ001-BK

Listed on Amazon as: Heavy Duty Car Ramps for Oil Changes, 2 Pack Solid Steel Vehicle Ramps, 8,000 LBS Capacity Per Pair, 35" x 12" x 9.5", Auto Service Ramps, 9" Tire Track Width, Traction Hole Surface, Blue

View on Amazon
Evcitn 75-inch ramps

#5 · Longest Loading Pair

5. Evcitn 75-inch ramps

  • Dimensions: 78.7"L x 47.2"W x 7.5"H
  • Load Capacity: 1500 lb
  • Material: Iron, Metal, Plastic, Stainless Steel

Best for: Long equipment loading.

Why it ranks #5: The 75-inch steel loading-ramp pair supports 1,500 pounds and has a textured, perforated surface for loading suitable motorcycles, mowers, and similar equipment.

At 75 inches long, Evcitn's ramps provide an extended loading path for lawn mowers, motorcycles, dirt bikes, ATVs, and similar equipment. The pair is rated for 1,500 pounds, and its textured, perforated surface adds a stated non-slip feature for loading.

The extra-long 75-inch ramp format gives equipment a longer approach onto a pickup truck or other loading surface, while the listed 1,500-pound capacity applies to the pair. Textured treads and perforations are described as helping traction, with the perforated design also part of the non-slip surface. Stainless-steel construction is stated in the features, though the specifications list multiple materials; this is a loading ramp for equipment, not a high-capacity vehicle-service ramp.

Pros
  • 75-inch ramp length
  • 1,500-pound pair capacity
  • Textured, perforated non-slip surface
  • Listed for mowers, motorcycles, ATVs, and dirt bikes
Cons
  • The 1,500-pound capacity applies to the pair, not to each ramp individually.

Skip it if you need a ramp rated for 1,500 pounds on each side; Evcitn lists 1,500 pounds for the pair.

Consider this pair for loading a motorcycle, mower, ATV, or similar equipment when the combined load stays within 1,500 pounds. Its 75-inch length and wide listed dimensions call for adequate truck-bed or storage space.

Full product details
BrandEvcitn
ColorBlack
Dimensions78.7"L x 47.2"W x 7.5"H
Item Weight36.4 pounds
Load Capacity1500 Pounds
ManufacturerEvcitn
Part NumberRP001-1.8M-2PCS-SV-01
MaterialIron, Metal, Plastic, Stainless Steel
Model NumberGCT001

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV

View on Amazon
Arejonner steel loading ramps

#6

6. Arejonner steel loading ramps

  • Dimensions: 70.86"L x 8.66"W x 1.57"H
  • Load Capacity: 1500 lb
  • Material: Alloy Steel

Best for: Traction-focused equipment loading.

Why it ranks #6: These 70.86-inch alloy-steel ramps are rated at 1,500 pounds per pair and have anti-slip holes for loading compatible motorcycles or outdoor equipment.

Anti-slip holes give the Arejonner alloy-steel ramps traction openings that also drain water rather than letting it pool in rain. At 70.86 inches long and rated for 1,500 pounds per pair, they are listed for motorcycles, ATVs, mowers, snowmobiles, and other equipment.

The 8.66-inch width and 70.86-inch length define a relatively narrow loading path, so equipment and loading alignment matter. The product describes anti-slip holes as improving traction and allowing drainage, a useful feature for outdoor loading in wet conditions. A 1,500-pound per-pair rating sets the load boundary, while alloy-steel construction gives the ramps their specified material. Their dimensions and listed uses make them equipment-loading ramps rather than broad vehicle-service platforms.

Pros
  • Anti-slip holes for traction
  • Holes allow water drainage
  • 1,500-pound capacity per pair
  • Alloy-steel construction
Cons
  • The 8.66-inch ramp width provides a narrower loading path than a 9-inch-wide ramp.

Skip it if you need a wider 9-inch loading surface; PioneerWorks aR2-x1nlL-0bgeWb77B1zOC-dbnif lists 9.06-inch-wide ramps.

A practical match for loading compatible motorcycles, snowmobiles, mowers, or ATVs where drainage and traction openings are useful. Keep the 1,500-pound pair limit and 8.66-inch width in view when selecting equipment.

Full product details
BrandArejonner
ColorWhite
Dimensions70.86"L x 8.66"W x 1.57"H
Item Weight34.1 pounds
Load Capacity1500 pounds
ManufacturerArejonner
MaterialAlloy Steel
Model NumberHM43

Listed on Amazon as: Heavy Duty 1500LB Loading Ramp,Steel Ramp for Hand Truck Motorcycle ATV

View on Amazon
Temushom folding ramps

#7

7. Temushom folding ramps

  • Dimensions: 83"L x 9"W x 1.9"H
  • Load Capacity: 1000 lb
  • Material: Alloy Steel

Best for: Long folding truck-bed access.

Why it ranks #7: The 83-inch steel pair offers a 1,000-pound total capacity and folding hinges; the product recommends a loading height up to 30 inches.

An 83-inch open length gives the Temushom folding ramps an extended approach for loading motorcycles or other compatible equipment onto a pickup. Reinforced welded hinges support repeated folding, while rust-resistant alloy steel and a 1,000-pound pair rating define the material and load limits.

Each ramp measures 83 inches long by 9 inches wide when open, giving buyers a long loading path with a specified width. The pair supports 1,000 pounds total, or 500 pounds per ramp, so the individual limit still applies when loading. Reinforced welded hinges are intended for repeated long-term use, and the ramps fold for storage. The listed recommended loading height is up to 30 inches, which is an important setup boundary.

Pros
  • 83-inch open length
  • Folding design with reinforced welded hinges
  • Rust-resistant alloy steel
  • Recommended loading height up to 30 inches
Cons
  • Each ramp is rated for 500 pounds, not the full 1,000-pound pair capacity.

Skip it if you need more than 500 pounds of capacity on one ramp; the listed 1,000-pound total is divided between the pair.

These suit owners needing long, folding ramps for compatible pickup loading, particularly when the recommended height stays at or below 30 inches. Keep the 500-pound-per-ramp limit and 9-inch width in mind.

Full product details
BrandTemushom
ColorSilvery
Dimensions83"L x 9"W x 1.9"H
Item Weight38 pounds
Load Capacity1000 pounds
ManufacturerTemushom
Part NumberB0H3MYKDTH
MaterialAlloy Steel
Model NumberTASR83FBK-PR

Listed on Amazon as: Temushom 83" Black Series Folding Truck Ramps, 1000 Lbs Capacity, 2 Pcs

View on Amazon
ELECHOI folding ramps

#8

8. ELECHOI folding ramps

  • Dimensions: 77"L x 9"W x 2"H
  • Load Capacity: 1000 lb
  • Material: Carbon Steel

Best for: Fold-away light equipment loading.

Why it ranks #8: These 77-inch carbon-steel ramps fold for storage and are rated at 1,000 pounds per pair, with a listed weight of 19 pounds.

A quick-fold mechanism lets the ELECHOI steel ramps collapse in about one second without tools, making setup and storage simpler for occasional loading. At 77 inches long, they provide an extended path for motorcycles, dirt bikes, ATVs, UTVs, lawn mowers, and electric bicycles.

Each ramp is rated for 500 pounds, with 1,000 pounds total for the pair, so load planning should account for the individual limit. The 77-by-8.8-inch unfolded dimensions provide a long but relatively narrow track for the listed equipment. At 19 pounds, the steel ramps are easier to carry than heavier options, and the integrated rubber handle supports handheld transport. Their quick-fold format also reduces storage length when not in use.

Pros
  • Quick-fold setup without tools
  • 77-inch unfolded length
  • 19-pound listed weight
  • Integrated rubber carrying handle
Cons
  • Each ramp is rated for 500 pounds, limiting the load on an individual ramp.

Skip it if you need more than 500 pounds of capacity on each ramp; Temushom TASR83FBK-PR lists the same 500-pound-per-ramp limit, so check other ratings carefully.

The ELECHOI suits riders and equipment owners who value quick folding, hand carrying, and compact storage between loading jobs. Keep each ramp's 500-pound rating and 8.8-inch width within the needs of your equipment.

Full product details
BrandELECHOI
ColorSilver
Dimensions77"L x 9"W x 2"H
Item Weight19 pounds
Load Capacity1000 lb
ManufacturerELECHOI
Part NumberEL726
Manufacturer Warranty Description1 year.
MaterialCarbon Steel
Model NumberEL726

Listed on Amazon as: Portabe Folding Steel Ramps, 500 lbs×2, 77" Heavy-Duty Ramps with Wider Ramp Surface, Anti-Slip Stable Loading Ramp, Fit for Motorcycle, Dirt Bike, ATV, UTV, Lawn Mower, Electric Bicycle

View on Amazon
PioneerWorks steel ramps

#9

9. PioneerWorks steel ramps

  • Dimensions: 76.38"L x 9.06"W x 1.97"H
  • Load Capacity: 1000 lb

Best for: Drainable steel loading surface.

Why it ranks #9: The 72-inch steel pair is rated at 1,000 pounds total and uses a punched traction surface; its stated per-ramp rating is 500 pounds.

A punched, textured surface combines tire grip with water drainage on PioneerWorks' 72-inch steel ramps. The pair's 1,000-pound total capacity, with 500 pounds per ramp, suits listed loading jobs involving motorcycles, e-bikes, ATVs, lawn mowers, and similar equipment.

The 72-inch length and 9-inch width give these ramps a defined track for truck beds, trailers, sheds, or garage loading. Their punched texture is described as improving tire grip while letting water drain, which can also make surface cleaning easier. Rust-resistant steel is a stated material feature, and the 500-pound individual rating matters when distributing equipment across the pair. The 1,000-pound combined limit sets a clear boundary for heavier loads.

Pros
  • 72-inch steel ramps
  • Punched textured surface supports grip and drainage
  • Rust-resistant steel
  • 500-pound rating per ramp
Cons
  • Each ramp is limited to 500 pounds, even though the pair is rated for 1,000 pounds.

Skip it if you need more than 500 pounds of capacity per ramp; Temushom TASR83FBK-PR also lists 500 pounds per ramp, so neither suits that load.

Choose PioneerWorks for loading compatible light equipment when drainage, a textured surface, and rust-resistant steel matter. Confirm the individual ramp load stays within 500 pounds and that its 72-inch length suits the loading height.

Full product details
BrandPioneerWorks
ColorSilver
Dimensions76.38"L x 9.06"W x 1.97"H
Item Weight39.3 pounds
Load Capacity1000 Pounds
ManufacturerPioneerWorks
Part Numbera
Model NumberaR2-x1nlL-0bgeWb77B1zOC-dbnif

Listed on Amazon as: PioneerWorks 2-Pack 72" Steel Ramps – 500 lb Each / 1,000 lb Pair,Silver

View on Amazon
MAXXHAUL 50515 ramps

#10

10. MAXXHAUL 50515 ramps

  • Dimensions: 35.5"L x 12"W x 8.25"H
  • Load Capacity: 3,250 lbs per ramp; 6,500 lbs per pair
  • Material: Plastic

Best for: Underbody access for maintenance.

Why it ranks #10: These ramps provide a 6.25-inch lift and 6,500-pound pair capacity, but their plastic construction does not meet a search specifically for steel ramps.

A 6.25-inch lift gives the MAXXHAUL 50515 a clear role in oil changes, inspections, and underbody repairs without relying on steel construction. The heavy-duty plastic ramps have deep-grooved surfaces and are rated for 6,500 pounds per pair, with each ramp rated at 3,250 pounds.

At 35.5 inches long and 12 inches wide, these ramps provide a defined footprint for vehicle positioning, while the 6.25-inch rise creates access for listed maintenance work. Deep grooves are specified to support stable tire placement, and the plastic construction distinguishes the pair from steel loading ramps. The pair rating is 6,500 pounds, but each ramp is rated at 3,250 pounds; both figures matter when matching the ramps to a vehicle and setup.

Pros
  • 6.25-inch lift height
  • Deep-grooved tire-placement surface
  • 3,250-pound rating per ramp
  • Heavy-duty plastic construction
Cons
  • Plastic construction may not suit buyers specifically seeking steel ramps.

Skip it if you require steel construction; Garvee zn3Zunmcuo6i1UE37079Pg4v uses alloy steel and is listed for vehicle maintenance.

The MAXXHAUL fits owners seeking a grooved ramp pair for oil changes or inspections who accept plastic rather than steel. Check the 3,250-pound per-ramp rating and 6.25-inch lift against the vehicle and service task.

Full product details
BrandMAXXHAUL
ColorBlack
Included Components50515
Dimensions35.5"L x 12"W x 8.25"H
Item Weight20.1 pounds
Load Capacity3,250 lbs per ramp; 6,500 lbs per pair
ManufacturerMaxxHaul Towing Products
Part Number50515
Manufacturer Warranty Description90 days.
MaterialPlastic
Model Number50515
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including bisphenol A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Listed on Amazon as: MaxxHaul 50515 6.25" Lift Car Ramps, 2-Pack – 13,000lb GVW, Deep Grooved Surface for Stable Tire Placement, Heavy-Duty, Black

View on Amazon

Avoid confusing service ramps with loading ramps

Service ramps and loading ramps solve different access problems, so choosing by the word truck alone can lead to a poor fit. Mytee Products service ramps and OTC TR2010 ramps are designed for vehicle service access, with short ramp heights around 9.25 to 9.625 inches and very high listed capacities. Long loading ramps such as the 75-inch Evcitn pair or 83-inch Temushom pair are meant to bridge a truck bed or similar loading point, but their pair capacities are only 1,000 to 1,500 pounds.

A loading ramp’s length does not make it suitable for holding a truck during maintenance, and a short service ramp does not replace a loading bridge. Match the ramp type to the task first, then confirm that the manufacturer’s stated capacity covers the actual load and configuration.

Check tire fit and loading geometry before use

A ramp can be within its capacity and still fail to suit a vehicle if the tire or loading geometry does not fit. TOLGORN lists a 9-inch internal tire track, while OTC specifies ramps 10 inches wide and says they hold vehicles with wheel widths less than 10 inches. Those figures describe different dimensions, so do not treat them as interchangeable: measure the tire and check the ramp’s usable track or stated limit.

For loading ramps, compare the ramp length with the height of the truck bed or trailer and the equipment’s approach angle. Temushom recommends a loading height up to 30 inches, but that figure is not a universal guarantee of fit.

Confirm the exact setup and follow product instructions before loading.

How to Choose Steel Truck Ramps

Ramp type and intended task

Start by choosing between service ramps for underbody access and loading ramps for moving equipment into a truck or trailer. The Mytee Products and OTC pairs are heavy-duty service designs, with listed capacities of 40,000 pounds and 20 tons respectively. Garvee and TOLGORN offer shorter vehicle service ramps with 8,000-pound pair capacities.

In contrast, the listed loading-ramp pairs range from 1,000 pounds for ELECHOI, PioneerWorks, and Temushom to 1,500 pounds for Evcitn and Arejonner. Buyers working beneath a heavy truck should focus on service ramps and their stated load rating; buyers loading a mower or motorcycle should consider the longer loading designs, while checking the actual equipment weight.

Capacity and how it is stated

Look for the capacity per ramp as well as the pair or total rating, and compare it with the load you intend to support. Mytee lists 20 tons or 40,000 pounds, while OTC lists 20 tons; Garvee and TOLGORN list 8,000 pounds total per pair. The loading-ramp products are rated much lower: Evcitn and Arejonner list 1,500 pounds per pair, while several others list 1,000 pounds per pair or 500 pounds per ramp.

Do not assume a pair rating means either individual ramp can carry that whole load. Heavy-vehicle service buyers should prioritize a compatible high-capacity service design; equipment-loading buyers should verify both per-ramp and pair limits for their particular load.

Dimensions, tire track, and storage

Check ramp length, width, lift or loading height, and storage format against the vehicle and available space. The service options range from Garvee’s 37-inch length and 8-inch lift to OTC’s 47-inch length; TOLGORN specifies a 9-inch internal tire track. Loading options span 70.86 to 83 inches long, with listed widths near 8.66 to 9 inches for several models.

ELECHOI and Temushom fold, while Mytee and OTC list wheels and handles for moving service ramps. Buyers with limited storage may favor a folding design, while a loading setup with greater height may need a longer ramp.

Measure the tires and loading height first; dimensions alone do not confirm compatibility.

Which Steel Truck Ramps Should You Choose?

For underbody work on a heavy truck, choose Mytee Products service ramps: their 40,000-pound listed capacity and included wheels and retractable handle make them the strongest fit here. If you need a 20-ton service-ramp pair with wheels and a retractable T-handle, consider OTC TR2010 ramps, while checking its under-10-inch wheel-width limit. For lighter vehicle maintenance, Garvee steel car ramps offer an 8-inch lift; TOLGORN steel ramps have a 9-inch internal tire track, so verify tire fit.

For loading equipment into a pickup, consider Evcitn 75-inch ramps or Arejonner steel loading ramps, both listed at 1,500 pounds per pair. Choose a folding loading pair such as Temushom or ELECHOI when storage matters, but their listed pair capacity is 1,000 pounds.

Frequently Asked Questions

How do I calculate the ramp capacity needed for my truck or equipment?

Start with the loaded weight of the vehicle or equipment, then check whether the ramp rating applies per ramp or to the pair. Make sure the rating covers the load actually supported, including how it is distributed during use. The listed capacities here vary, so compare the exact rating and intended application before choosing.

How can I check whether a ramp’s width and length will fit my tires and loading height?

Compare the ramp’s usable track width with your tire width, and check its length against the height you need to reach. Confirm that the tire can sit securely on the ramp surface throughout loading. The TOLGORN ramps cited in the verdict have a 9-inch internal tire track; verify tire fit before selecting them.

What precautions should I take when driving or positioning a vehicle on steel ramps?

Use ramps on a firm, level surface and check that they are positioned securely before loading. Align tires with the ramp tracks, move slowly, and stop if a ramp shifts or the vehicle is misaligned. For underbody work, use appropriate additional support; do not rely on a loading ramp as a substitute for service ramps.

Should I choose service ramps or loading ramps for my job?

Choose service ramps to raise a vehicle for maintenance, and loading ramps to move equipment into a pickup. The Mytee Products ramps lead this roundup for heavy-truck maintenance, while the Evcitn and Arejonner options are listed as loading pairs. Check each ramp’s intended use and capacity before buying.

What should I check before storing folding steel ramps?

Check that the ramps fold and latch securely, and inspect the hinges and loading surfaces for damage or movement before each use. Keep them clean and dry when stored, and follow the product’s instructions. Temushom and ELECHOI are folding options listed at 1,000 pounds per pair; confirm that rating suits your load.

Final Words

For heavy-truck underbody maintenance, choose Mytee Products: its listed 40,000-pound capacity, caster wheels, and retractable handle fit that job. For lighter vehicle service, compare lift height and tire-track fit, including the Garvee and TOLGORN options. For loading equipment into a pickup, consider the Evcitn or Arejonner pair, or a folding pair when storage matters.

Before committing, verify the ramp’s intended use, capacity basis, tire fit, and loading height.

Leave a Reply

Your email address will not be published. Required fields are marked *