Best Onboard Air Compressor For Trucks

Best Onboard Air Compressor For Trucks

A strong truck onboard air compressor should match the job: tire reinflation and trail use call for a capable compressor and practical air delivery, while air-spring adjustments favor built-in controls. The VIAIR Constant Duty OBA leads this lineup with a 450C compressor, a 2.5-gallon tank, and included wiring, hose, tire chuck, and dash controls. Other options cover air horns, suspension, and portable tire inflation, but they are not interchangeable: some have tanks, some focus on air springs, and one is a portable inflator rather than a permanently onboard system.

Compare pressure, tank capacity, airflow where listed, and how you plan to use the air before choosing. Check your truck’s installation space and electrical requirements against the product details before buying.

The VIAIR Constant Duty OBA is the best overall choice here for truck owners who need onboard air for off-road tires and general pneumatic use. Its 450C compressor is rated to 150 PSI and is paired with a 2.5-gallon tank; the kit also lists a 35-foot coil hose, tire chuck, 20-foot power wire, and dash gauge with switch. Those included parts make it a more complete trail-oriented system than compressor-only or air-spring-focused alternatives.

Confirm its dimensions and installation requirements fit your truck.

Our Top Picks

VIAIR Constant Duty OBABest Overall

VIAIR Constant Duty OBA

Its 450C compressor reaches 150 PSI with a 2.5-gallon tank, and the kit includes a tire chuck, coil hose, wiring, and dash controls.

View on Amazon
VIAIR 150 PSI Air Source KitBest Tank Kit

VIAIR 150 PSI Air Source Kit

The 280C compressor and 2-gallon tank suit truck air horns and other onboard uses; listed airflow is 1.59 CFM.

View on Amazon
LLNSEAUTO Medium Duty Air SystemLargest Tank

LLNSEAUTO Medium Duty Air System

Its 2.5-gallon tank provides five ports, while the 12-volt compressor is rated for 150 PSI and a 25-amp maximum draw.

View on Amazon

Compare the Truck Onboard Air Compressor Options

#ProductVoltageWeightBuy
112 V4.54 gView on Amazon
212 V19.8 lbView on Amazon
312 V10.18 kgView on Amazon
4—11.92 lbView on Amazon
512 V0.27 gView on Amazon
6
maXpeedingrods Wireless System6. maXpeedingrods Wireless SystemFlexible wireless suspension fit
—12.9 lbView on Amazon
7
maXpeedingrods Air Spring Kit7. maXpeedingrods Air Spring KitEveryday single-path air springs
—4.74 lbView on Amazon
8
DUBANGLONG Air Bag Kit8. DUBANGLONG Air Bag KitCab-controlled air-bag suspension
12—View on Amazon
9
RETRUE Onboard Air System9. RETRUE Onboard Air SystemIn-cab air-bag adjustment
12 V5.39 lbView on Amazon
10
ALL-TOP Dual Cylinder Inflator10. ALL-TOP Dual Cylinder InflatorPortable truck tire inflation
12 V24 lbView on Amazon

Detailed Reviews: Best Onboard Air Compressor For Trucks

VIAIR Constant Duty OBA

#1 · Best Overall

1. VIAIR Constant Duty OBA

  • Voltage: 12 V
  • Weight: 4.54 g

Best for: Off-road tire reinflation.

Why it ranks #1: Its 450C compressor reaches 150 PSI with a 2.5-gallon tank, and the kit includes a tire chuck, coil hose, wiring, and dash controls.

The 450C compressor and 2.5-gallon tank form VIAIR’s Constant Duty OBA system, which is listed for tires up to 37 inches. For truck and 4×4 owners airing down on trails, the onboard arrangement supports reinflation before returning to the road, with a 12-volt supply.

The 1.8 CFM airflow and 150 PSI rating give buyers concrete operating specifications for an off-road installation, while the 2.5-gallon tank provides stored air. The included 35-foot coil hose and tire chuck make tire access part of the package, and the 20-foot, 12-gauge wire with inline fuse holder supports connection to the vehicle battery. A dash-panel gauge and on/off switch add in-cab monitoring and control; the stated fit extends to tires up to 37 inches.

Pros
  • 450C compressor with 150 PSI rating
  • 2.5-gallon tank and 1.8 CFM airflow
  • Listed for tires up to 37 inches
  • Includes 35-foot coil hose, tire chuck, and dash-panel gauge
Cons
  • The listed 12-volt system requires a vehicle battery connection and engine-start procedure.

Skip it if you want wireless air-spring adjustment instead of trail tire equipment; Air Lift WirelessONE 25980EZ offers a handheld controller and mobile app.

Off-road truck and 4×4 owners needing to reinflate tires up to 37 inches can make use of the included hose, chuck, and dash controls. Confirm the system’s listed tire range and battery-wiring workflow suit the vehicle.

Full product details
BrandVIAIR
Air Flow Capacity1.8 cfm
Capacity2.5 gallons
ColorSilver Compressor/Black Tank
Compatible Hose Diameter0.25 inches
Included Components(3) 1/4” Compression Fittings, 1/4” 175 PSI Safety Valve, 1/4” Drain Cock, 1/4” Quick Connect Stud (F), 20ft. 12-Gauge Wire with Inline Fuse Holder, 35ft. Coil Hose with Tire Chuck, 4” Strip of Continuous Grommet Material, Air Hose, Coupling, Dash Panel Gauge with ON/OFF Switch, Electrical Connectio
Dimensions26.5"L x 14.5"W x 10"H
Item Weight4.54 g
ManufacturerViair Corporation
Part Number10007
Manufacturer Warranty DescriptionAll VIAIR products come with a One Year Manufacturer Defect Warranty
MaterialAluminum
ModelConstant Duty OBA
Model Number10007
Recommended UsesTire Inflation
StyleSystem
Voltage12 volts

Listed on Amazon as: VIAIR Constant Duty OBA Onboard Air System with 450C Air Compressor & 2.5 Gallon Tank, 12V Offroad Compressor, 150 PSI, up to 37" Tires

View on Amazon
VIAIR 150 PSI Air Source Kit

#2 · Best Tank Kit

2. VIAIR 150 PSI Air Source Kit

  • Voltage: 12 V
  • Weight: 19.8 lb

Best for: Truck air-horn installations.

Why it ranks #2: The 280C compressor and 2-gallon tank suit truck air horns and other onboard uses; listed airflow is 1.59 CFM.

A tank-mounted 280C compressor fills VIAIR’s two-gallon tank from empty to 145 PSI in three minutes and 40 seconds, giving truck owners a stated refill benchmark. The 150 PSI-rated tank has five ports, and the kit is presented for air horns, suspension, air lockers, and other onboard-air uses.

The 12-volt compressor supplies 1.59 CFM, while the included pressure switch turns on at 110 PSI and off at 145 PSI. That pairing gives the tank a defined operating range for an onboard setup; the safety valve is rated to 175 PSI. VIAIR states the kit provides 120 PSI for air horns, and the five-port tank offers connection points for installation. Its two-gallon capacity and 19.8-pound listed weight are practical factors when choosing a mounting location.

Pros
  • 280C compressor mounted on a 150 PSI-rated tank
  • Five-port, two-gallon tank
  • Stated 0-to-145-PSI refill time of three minutes, 40 seconds
  • Includes pressure switch, safety valve, and drain cock
Cons
  • The two-gallon tank is smaller than the 2.5-gallon tank in VIAIR Constant Duty OBA.

Skip it if you need a 2.5-gallon tank for trail tire inflation; VIAIR Constant Duty OBA with 450C compressor lists that capacity and a tire chuck.

Truck owners prioritizing air horns and a tank-mounted 12-volt setup have a useful stated refill time and included pressure controls here. Check that the two-gallon tank and its mounting location suit the intended onboard-air installation.

Full product details
BrandVIAIR
Air Flow Capacity1.59 cfm
Capacity2 gallons
ColorBlack
Compatible Hose Diameter0.38 inches
Included Components280C Pewter Air Compressor, Drain Cock, Pressure Switch (110 PSI On / 145 PSI Off), Safety Valve (175 PSI), Thermal Overload Protector
Item Weight19.8 pounds
ManufacturerViair Corporation
Part Number20005
Manufacturer Warranty DescriptionOne year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty
MaterialAluminum
ModelMC-228V
Model Number20005
Recommended UsesPowering Air Horns, Supporting Suspension, Running Tools, Off-roading, Recreational Gear
StyleTank-mounted, Reciprocating, Portable, On-road, 12V Electric
Voltage12 volts

Listed on Amazon as: VIAIR 150 PSI High-Flow Air Source Kit | Portable On Board Air Compressor with 2 Gallon Tank for Truck, Air Horns, Suspension, Air Locker, Black

View on Amazon
LLNSEAUTO Medium Duty Air System

#3 · Largest Tank

3. LLNSEAUTO Medium Duty Air System

  • Voltage: 12 V
  • Weight: 10.18 kg

Best for: Truck horn and tool users.

Why it ranks #3: Its 2.5-gallon tank provides five ports, while the 12-volt compressor is rated for 150 PSI and a 25-amp maximum draw.

A 2.5-gallon tank with five 1/4-inch NPT ports gives the LLNSEAUTO system multiple connection points for onboard air. Its 12-volt compressor reaches a stated maximum working pressure of 150 PSI, making this a tank-based option for truck owners adding air access for horns or pneumatic tasks.

The 2.5-gallon tank measures 20.25 by 6 by 8 inches, so its dimensions are useful to check against the intended mounting space before installation. Five ports, two quick-connect studs, and a coupler provide several connection options, while the included mounting kit supports tank installation. A 22-inch braided hose connects to the 1/4-inch NPT inlet. The compressor draws up to 25 amps and has a 33% duty cycle at 100 PSI, relevant limits for planning electrical supply and operating intervals.

Pros
  • 12-volt compressor with 150 PSI maximum working pressure
  • 2.5-gallon tank with five 1/4-inch NPT ports
  • Includes mounting kit, drain cock, and quick-connect fittings
  • 22-inch braided air hose included
Cons
  • The 33% duty cycle at 100 PSI limits sustained compressor operation.

Skip it if you need continuous-duty operation; VIAIR Constant Duty OBA with 450C compressor is the more relevant listed option.

Truck owners adding a horn or other onboard air connection can consider this kit if its 2.5-gallon tank and five-port layout suit the installation. Account for the 33% duty cycle when planning repeated or extended compressor use.

Full product details
BrandLLNSEAUTO
Capacity2.5 gallons
ColorSilver
Compatible Hose Diameter0.22 inches
Included ComponentsAir Hose
Dimensions20.25"L x 6"W x 8"H
Item Weight10.18 kg
ManufacturerLLNSEAUTO
Part NumberA003-7006DC12V
ModelA003-7006DC12V
Model NumberA003-7006DC12V
Recommended UsesNailing
StylePortable
Voltage12 volts
Additional InformationImportant Information Bulb Voltage 12 volts

Listed on Amazon as: Medium Duty Onboard Air System/Kit 150 PSI Compressor 12V With 2.5 Gallon (9.5 Liter) Train/Air Horn Tank

View on Amazon
EVIL ENERGY 200 PSI Compressor

#4 · Highest Pressure

4. EVIL ENERGY 200 PSI Compressor

  • Weight: 11.92 lb

Best for: Fast-refill horn and tool users.

Why it ranks #4: The 12-volt compressor reaches 200 PSI and is described as filling a 3-gallon tank from 0 to 150 PSI in 3 minutes 43 seconds.

A stated fill time of three minutes and 43 seconds for a three-gallon tank from zero to 150 PSI gives the EVIL ENERGY compressor a concrete refill benchmark. Its maximum pressure is 200 PSI, and the listing identifies truck horns, tire inflation, suspension systems, and pneumatic tools as uses.

The 200 PSI maximum pressure pairs with the stated tank-refill time to help buyers assess this compressor for installations where replenishing stored air matters. Its 1/4-inch NPT description identifies the connection standard, while the listed 12-volt application suits vehicle-based setups. The manufacturer describes it for horns, tires, suspension, and air tools, giving the compressor broad stated use cases. However, the supplied information does not specify a tank, hose, or mounting hardware, so buyers should plan the rest of the system accordingly.

Pros
  • 200 PSI maximum pressure
  • Listed three-minute, 43-second fill for a three-gallon tank to 150 PSI
  • 12-volt compressor for vehicle applications
  • Stated uses include horns, tires, suspension, and pneumatic tools
Cons
  • The supplied listing does not specify an included tank or mounting hardware.

Skip it if you want a complete tank-and-hose package; VIAIR 20005 lists a two-gallon tank, drain cock, and pressure switch.

Truck owners assembling a high-pressure horn, tire, suspension, or tool setup may value the stated refill figure. The supplied details do not establish included tank or mounting parts, so account for those needs before choosing it.

Full product details
BrandEVIL ENERGY
Item Weight‎11.92 pounds
Item model number‎EV-BVN0001004
Manufacturer‎EVIL ENERGY
Part Number‎EV-BVN0001004
Model‎EV-BVN0001004
Package Dimensions‎13.94 x 9.69 x 6.77 inches

Listed on Amazon as: EVIL ENERGY 200PSI Air Horn Suspension Compressor for Car 12V Heavy Duty 1/4 NPT Onboard Air Ride Compressor for Train, Truck, Inflating Tires, Suspension Systems, Train Horn, DIY Pneumatic Tools

View on Amazon
Air Lift WirelessONE EZ Mount

#5 · Best Wireless Control

5. Air Lift WirelessONE EZ Mount

  • Voltage: 12 V
  • Weight: 0.27 g

Best for: Wireless air-spring control.

Why it ranks #5: Wireless handheld and mobile-app controls adjust air springs from inside or outside the truck; the compressor is rated up to 120 PSI.

Wireless control from either a handheld remote or mobile app lets Air Lift WirelessONE users adjust air springs from inside or outside the vehicle. Its 12-volt compressor reaches up to 120 PSI, and single-path operation inflates or deflates both springs equally for balanced load support.

The single-path design sends equal pressure to both air springs, supporting balanced load handling rather than independent side adjustment. Wireless handheld and app controls let users make changes without reaching a wired control panel, while the EZ Mount packages the compressor system components for installation. The 120 PSI maximum is specified for hauling and towing applications. This kit is expressly for vehicle air-spring pressure adjustment, so it is better matched to suspension control than general tire inflation or air-tool work.

Pros
  • Control through handheld remote or mobile app
  • Inflates and deflates both air springs equally
  • 12-volt compressor rated up to 120 PSI
  • Includes EZ Mount system
Cons
  • Single-path operation does not provide separate pressure adjustment for each air spring.

Skip it if you need pre-sets and a bracket that can mount vertically or horizontally; maXpeedingrods SF91YS lists those features.

Truck owners adjusting air springs for hauling or towing can use the wireless controls and equal-pressure operation. The single-path setup suits balanced adjustments, but buyers needing independent spring control should account for that limitation.

Full product details
BrandAir Lift
Color25980ez – 2nd Generation W. Ez Mount and Mobile App
Included ComponentsCompressor, Controller, Wiring, EZ Mount System
Item Weight0.27 g
ManufacturerAir Lift
Part Number25980EZ
Manufacturer Warranty Description2 Year Limited Warranty
MaterialAlloy Steel
ModelWirelessOne EZ Mount
Model Number25980EZ
Recommended UsesVehicle Air Spring Pressure Adjustment
StyleSingle
Voltage12 volts
Additional InformationImportant Information Bulb Voltage 12 volts Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Air Lift 25980EZ WirelessONE On-Board Air Compressor System with EZ Mount

View on Amazon
maXpeedingrods Wireless System

#6

6. maXpeedingrods Wireless System

  • Weight: 12.9 lb

Best for: Flexible wireless suspension fit.

Why it ranks #6: Bluetooth app and remote controls allow suspension adjustments, and its preassembled compressor-manifold bracket supports vertical or horizontal installation.

A pre-assembled compressor and manifold on one bracket can mount vertically or horizontally, giving the maXpeedingrods system flexibility when a truck’s installation space has a particular layout. Bluetooth app and remote control let users adjust the suspension from inside or outside the vehicle.

The combined compressor-and-manifold bracket reduces the number of separate assemblies to position, while its vertical or horizontal mounting options accommodate different vehicle layouts. Wireless control through Bluetooth and a handheld remote supports suspension adjustments without being tied to a control panel. Programmable pre-sets are also listed, allowing users to set preferred adjustments. The supplied information identifies the system as an onboard suspension compressor but does not state its pressure rating or inflation time, so buyers should check whether those specifications meet their requirements.

Pros
  • Bluetooth-enabled mobile app control
  • Handheld remote control
  • Compressor and manifold pre-assembled on one bracket
  • Bracket supports vertical or horizontal installation
Cons
  • The supplied product details do not state a pressure rating or inflation time.

Skip it if you need a stated compressor pressure and inflation time; maXpeedingrods ID75UP lists 100 PSI and timed inflation benchmarks.

Truck owners prioritizing wireless suspension adjustment and flexible bracket orientation may find this layout useful. The supplied details leave pressure and inflation speed unspecified, so make sure those operating figures are available and suitable for the intended air-spring setup.

Full product details
BrandmaXpeedingrods
Item Weight‎12.9 pounds
Item model number‎‎SF91YS
Manufacturer‎maXpeedingrods
Part Number‎‎SF91YS
Dimensions‎14.53 x 13.82 x 10.67 inches

Listed on Amazon as: maXpeedingrods Wireless On Board Air Compressor System App & Remote Control

View on Amazon
maXpeedingrods Air Spring Kit

#7

7. maXpeedingrods Air Spring Kit

  • Weight: 4.74 lb

Best for: Everyday single-path air springs.

Why it ranks #7: This single-path kit is tailored to air springs, delivering up to 100 PSI and listing inflation times of about 42 seconds to 30 PSI.

A single-path layout distributes pressure evenly to both air springs, while press-and-hold operation helps prevent over-inflation during adjustments. The maXpeedingrods kit reaches 30 PSI in about 42 seconds and 60 PSI in about 90 seconds, with full inflation stated in under three minutes.

The 100 PSI onboard compressor is specified for everyday air-spring inflation, and the timed benchmarks give owners a practical sense of adjustment speed. Single-path operation applies even pressure to both springs, supporting a balanced setup, while press-and-hold controls make changes straightforward and help prevent over-inflation. Its 4.74-pound listed weight and compact 12.99-by-8.27-by-7.87-inch dimensions can help with installation-space planning. The product is a suspension compressor kit, not a high-pressure tire-inflation system.

Pros
  • Single-path operation distributes pressure evenly to both air springs
  • Press-and-hold operation helps prevent over-inflation
  • 100 PSI compressor
  • Full inflation stated in under three minutes
Cons
  • The 100 PSI maximum is lower than the 120 PSI rating of Air Lift WirelessONE.

Skip it if you want mobile-app or handheld wireless adjustments; Air Lift WirelessONE 25980EZ lists both control options.

Truck owners making routine air-spring adjustments can use the single-path controls and stated inflation times to manage pressure. Its 100 PSI rating and suspension focus define the fit; consider those limits if you need other onboard-air tasks.

Full product details
BrandmaXpeedingrods
Item Weight‎4.74 pounds
Manufacturer‎maXpeedingrods
Part Number‎‎ID75UP
Dimensions‎12.99 x 8.27 x 7.87 inches

Listed on Amazon as: maXpeedingrods On Board Air Compressor System Air Spring Compressor Kit

View on Amazon
DUBANGLONG Air Bag Kit

#8

8. DUBANGLONG Air Bag Kit

  • Voltage: 12

Best for: Cab-controlled air-bag suspension.

Why it ranks #8: The in-cab gauge controls air-suspension inflation and deflation; its listed 12-volt system includes a gauge controller kit and hoses.

An in-cab air gauge control panel operates the DUBANGLONG compressor for air-suspension inflation and deflation, putting pressure adjustments at the driver’s fingertips. The kit includes air hoses and hardware, while its self-locking quick-connect fittings are described as securing air lines and improving sealing.

The pure-copper coil is described as supporting stable efficiency, and the baked-enamel housing is intended to support longer service life. Anti-vibration pads address noise and smoothness, while self-locking fittings hold air lines firmly and aim to reduce leakage. Together with the in-cab gauge controller, these details support a practical air-bag workflow: adjust pressure from the cab and connect the air lines using the supplied fittings. The listing does not provide a pressure rating, so confirm its operating range suits the suspension.

Pros
  • In-cab air gauge control for inflation and deflation
  • Self-locking quick-connect fittings
  • Anti-vibration pads
  • Includes air hoses and hardware
Cons
  • The supplied listing does not specify the compressor’s pressure rating.

Skip it if you require a stated pressure rating for air-spring inflation; maXpeedingrods ID75UP lists a 100 PSI maximum.

Truck owners seeking an in-cab gauge and air-line kit for air-bag suspension can consider this control-focused package. Its fitting and vibration details are useful, but the missing pressure rating is an important boundary for selecting a compressor.

Full product details
BrandDUBANGLONG
ColorBlack
Included ComponentsAir Gauge Controller kit
Dimensions8.98"L x 3.46"W x 5.2"H
ManufacturerDUBANGLONG
ModelAir Gauge Controller
Model NumberDBL-009
Recommended UsesAir Suspension Control
StyleAir Bag Compressor Kit
Voltage12

Listed on Amazon as: Air Bags Suspension Kit, On Board Air Compressor System with Upgraded Air Ride Compressor, Pressure Gauge, Hardware and Air Hoses, for Truck Air Suspension Control

View on Amazon
RETRUE Onboard Air System

#9

9. RETRUE Onboard Air System

  • Voltage: 12 V
  • Weight: 5.39 lb

Best for: In-cab air-bag adjustment.

Why it ranks #9: This 12-volt air-bag compressor kit reaches up to 100 PSI and lists inflation times, but its stated use centers on air-bag suspension.

Driver-seat control lets the RETRUE system adjust air bags without leaving the cab, making suspension pressure changes convenient during a drive. The 12-volt kit reaches 50 PSI in a stated 80 seconds and can inflate to 100 PSI, positioning it for air-bag suspension rather than high-capacity tire work.

The listed inflation times—80 seconds to 50 PSI, two minutes and 10 seconds to 70 PSI, and three minutes and 50 seconds to full inflation—give air-bag users practical benchmarks for pressure adjustments. Its in-cab controls let the driver operate the system from the seat, while the 12-volt specification suits vehicle power. The title identifies it as a universal air-bag compressor kit, but the supplied specifications do not detail tank capacity or hose length, so installation planning should focus on the vehicle’s suspension setup.

Pros
  • In-cab control for adjusting air bags
  • 12-volt system
  • Reaches 50 PSI in a stated 80 seconds
  • Listed maximum pressure of 100 PSI
Cons
  • Its 100 PSI maximum is below the 120 PSI rating of Air Lift WirelessONE.

Skip it if you need wireless adjustment from outside the cab; Air Lift WirelessONE 25980EZ includes a handheld controller and mobile app.

Truck owners seeking driver-seat air-bag pressure control can use the stated inflation benchmarks to plan adjustments. This is a suspension-focused 100 PSI kit, so consider whether that pressure range and the supplied installation details suit your setup.

Full product details
BrandRETRUE
Item Weight‎5.39 pounds
Item model number‎RACS001-N
Manufacturer‎RETRUE
Part Number‎RACS001
Model‎RETRUE On Board Air Compressor
Package Dimensions‎11.93 x 9.29 x 6.38 inches
Special Features‎Quick Inflation
Voltage‎12 volts

Listed on Amazon as: RETRUE Onboard Air Compressor System Universal Air Bag Compressor Kit

View on Amazon
ALL-TOP Dual Cylinder Inflator

#10

10. ALL-TOP Dual Cylinder Inflator

  • Voltage: 12 V
  • Weight: 24 lb

Best for: Portable truck tire inflation.

Why it ranks #10: Its 150 PSI rating and dual cylinders suit truck-tire inflation, but the listed product is a portable inflator, not a dedicated onboard system.

A dual-cylinder compressor rated at 350 liters per minute gives the ALL-TOP portable kit a high listed airflow figure for truck tires and off-road use. Its 12-volt power, 150 PSI maximum, and included storage bag make it a portable alternative to a tank-mounted onboard system.

The dual aluminum cylinders are described as aiding heat dissipation, while an auto-thermal cutoff and over-current protection guard the motor during operation. Four anti-vibration feet help keep the 24-pound compressor stable, and an anti-scald rubber handle supports handling. A 6.5-foot power cord, 26-foot air hose, and nylon tool bag give the portable setup useful reach and storage. The stated 350 liters per minute airflow and 150 PSI maximum are relevant when comparing it with vehicle-mounted systems.

Pros
  • Dual-cylinder 12-volt compressor with 150 PSI maximum
  • 350 liters per minute listed airflow
  • Includes 26-foot air hose and nylon storage bag
  • Auto-thermal cutoff, over-current protection, and anti-vibration feet
Cons
  • This is a portable compressor kit, not a tank-mounted onboard air system.

Skip it if you need stored air for an onboard horn; VIAIR 20005 includes a two-gallon tank and a tank-mounted compressor.

Truck and RV owners who want a portable 12-volt inflator can benefit from the long hose and included bag. It is not a tank-mounted system, so consider storage and access to the compressor when planning vehicle use.

Full product details
BrandALL-TOP
Air Flow Capacity350 liters per minute
Capacity350 liters per minute
Color350 L/Min
Compatible Hose Diameter0.46 inches
Included ComponentsAir Hose, Dual Cylinder Air Compressor, Nozzle Adaptor, Storage Bag, User Manual
Item Weight24 pounds
ManufacturerALL-TOP
Part NumberATACR300
Manufacturer Warranty DescriptionRELIABLE WARRANTY: To Join ALL-TOP's 200,000+ Community Today, our Reliable Overland Products support all Pro Players over the world. We persistently improve our Overland Products & After-Sale Services to ensure your 100% Satisfaction & Experience. ALL-TOP Air Compressors are provided with 2-Year /
MaterialAluminum, Metal
ModelATACR300
Model NumberATACR300
Recommended UsesTire Inflation
StylePortable
Voltage12 volts

Listed on Amazon as: ALL-TOP Air Compressor Kit, Dual Cylinder 12V Portable Inflator 12.35 ft3/Min, Offroad Air Compressor Pump for Truck Tires, Heavy Duty Max 150 PSI for 4×4 Vehicle & RV

View on Amazon

Avoid treating pressure as tire-inflation speed

Maximum pressure alone does not tell you how quickly a compressor will inflate a truck tire. This product set shows why: the VIAIR Constant Duty OBA and LLNSEAUTO system list 150 PSI, while the VIAIR kit also provides a 1.59 CFM airflow figure and a tank refill time. The EVIL ENERGY unit lists a 200 PSI maximum and a refill time for a 3-gallon tank, but those figures do not establish tire-inflation time.

Tank capacity, airflow, duty cycle, hose setup, and the tire’s starting pressure all affect the job. For example, the LLNSEAUTO compressor lists a 33% duty cycle at 100 PSI, a detail that matters when planning repeated or extended use.

Compare like-for-like airflow or real task times when available; do not assume a higher PSI rating means faster tire service.

Check whether a suspension kit serves your air tools

Air-spring compressors and tank-based utility systems solve different truck problems, so confirm the intended use before assuming one system covers both. Air Lift WirelessONE and the maXpeedingrods air-spring kits emphasize pressure adjustment for suspension, including single-path operation that supplies both springs equally. By contrast, the VIAIR tank kits list tanks, ports, and components associated with broader onboard-air uses, while the VIAIR Constant Duty OBA includes a tire chuck and coil hose.

A compressor’s PSI rating alone does not establish compatibility with a particular air tool or tire-inflation setup. Review the complete kit contents, air connections, pressure requirements, and intended application.

If you need to control suspension and inflate tires, check whether the system provides the fittings and air delivery arrangement for both tasks rather than relying on its general label.

How to Choose a Truck Onboard Air Compressor

Match the system to the job

Look first for a system described for your main task, not just a high pressure number. The VIAIR Constant Duty OBA is presented for off-road use and large tires, and its kit includes a tire chuck and 35-foot coil hose. VIAIR’s 150 PSI Air Source Kit is positioned for horns, suspension, and air tools, while Air Lift WirelessONE and the two maXpeedingrods air-spring products focus on suspension adjustment.

The portable ALL-TOP is built for tire inflation but is not a dedicated onboard setup. Trail drivers who need tire service should favor a tank-based or tire-ready kit; truck owners adjusting air springs should favor the suspension-specific controls.

Compare pressure, tank, and airflow details

Check the stated pressure alongside tank capacity and airflow, since these figures describe different parts of performance. The listed onboard tank systems range from the VIAIR 2-gallon kit to the 2.5-gallon VIAIR Constant Duty OBA and LLNSEAUTO systems. Pressure ratings include 100 PSI for the RETRUE and maXpeedingrods air-spring kits, 150 PSI for several compressor systems, and 200 PSI for EVIL ENERGY.

Airflow is specified for only some products: VIAIR lists 1.59 CFM and 1.8 CFM, while ALL-TOP lists 350 liters per minute. Buyers needing air for tires or tools should compare the available airflow and tank information; air-spring users may prioritize the required working pressure.

Choose controls and installation format

Decide whether you want in-cab or wireless suspension control, or a more general tank-and-hose arrangement. Air Lift WirelessONE offers a handheld controller and mobile app, while maXpeedingrods Wireless provides Bluetooth app and remote operation with a preassembled bracket that can mount vertically or horizontally. DUBANGLONG lists an in-cab air gauge controller, and the RETRUE system also describes in-cab control.

The VIAIR Constant Duty OBA instead includes a dash gauge with an on/off switch, tire chuck, and hose. Choose wireless or panel controls when frequent air-spring adjustment is the priority; favor a tank kit with useful outlets and hose components when you need general onboard air.

Verify mounting space and wiring before purchase.

Which onboard air compressor fits my truck?

For off-road tire reinflation and broader onboard-air use, choose the VIAIR Constant Duty OBA: its 450C compressor, 2.5-gallon tank, tire chuck, and coil hose make it the strongest all-round fit in this group. For a tank-based setup geared toward horns and air tools, the VIAIR 150 PSI Air Source Kit has a 2-gallon tank and a listed 1.59 CFM airflow. If tank capacity is the priority, the LLNSEAUTO Medium Duty Air System also provides 2.5 gallons and five ports.

Truck owners focused on air-spring adjustments should consider the Air Lift WirelessONE EZ Mount for wireless control, or the maXpeedingrods Air Spring Kit for straightforward single-path operation. Choose the ALL-TOP Dual Cylinder Inflator only if portability matters more than a dedicated onboard installation.

Frequently Asked Questions

How do I determine whether an onboard compressor will fit my truck and available mounting space?

Check the compressor, tank, and included hardware dimensions against the intended mounting area before choosing a system. Allow room for wiring, hoses, fittings, and access for installation and service. Also confirm that the proposed location works with your truck’s layout and the product’s stated installation requirements.

What wiring, fusing, and battery capacity does my truck need for an onboard air compressor?

Use the compressor manufacturer’s wiring and fuse requirements, and confirm your truck’s electrical system can support them. Compare the specified wire gauge, fuse rating, and current draw with the installation plan rather than guessing. If the requirements are unclear, consult the manufacturer or a qualified installer before connecting the compressor.

Can I use one onboard air system for both air springs and tire inflation?

Yes, if the system’s pressure, airflow, connections, and controls suit both tasks. Air-spring adjustment and tire inflation have different demands, so check the compressor’s specifications and the vehicle and tire manufacturers’ guidance. A kit with a tank, suitable hose, and tire chuck can support broader use when its ratings match.

What should I compare when choosing a tank-based system for air tools or horns?

Compare the tank capacity, compressor pressure and airflow ratings, port arrangement, and the requirements of the horns or tools you plan to use. Check whether the kit includes the needed controls and fittings. The published verdict identifies the VIAIR 150 PSI Air Source Kit as a tank-based option geared toward horns and air tools.

When is a portable compressor a better choice than a dedicated onboard system?

A portable compressor may make more sense when you value portability over a dedicated truck installation and do not need a permanently mounted air system. Consider where you will store and use it, and whether its stated capabilities suit your tire-inflation needs. The ALL-TOP Dual Cylinder Inflator is the portable option in this group.

Final Words

For off-road tire reinflation and broader pneumatic use, the VIAIR Constant Duty OBA is the clearest all-round choice in this group, with its 450C compressor, 2.5-gallon tank, tire chuck, and coil hose. Confirm that its dimensions and installation requirements suit your truck. Choose a tank-based alternative for horns or tools, an air-spring-focused kit for suspension adjustments, or the portable ALL-TOP when portability matters more than a dedicated installation.

Leave a Reply

Your email address will not be published. Required fields are marked *