Best Foot Switch For Trolling Motor: 10 Options Compared

#1 · Best Overall

1. Haoguo Foot Control Switch

• Operating Voltage: 24 V DC
• Material: Stainless Steel
• Compatible Devices: 12V-24V manual trolling motors
• dimensions: 3 x 2.3 x 2 in

Best for: Hands-free manual motor control.

Why it ranks #1: It specifies 12V–24V compatibility, a 50A rating, IP65 protection, stainless-steel contacts, anti-stick operation, and compact 3 x 2.3 x 2-inch dimensions.

A 15-degree ergonomic pedal pairs with a non-slip surface to let anglers start and stop a manual trolling motor by foot, keeping hands on a rod or wheel. Haoguo rates the switch for 12V–24V systems and up to 50A, giving it a clear role on compatible boat decks.

The internal anti-stick design is intended to prevent jamming, while the pedal angle and non-slip surface support controlled presses when operating the motor. Its stated compatibility with 12V–24V manual trolling motors makes it suitable across those voltage systems, and IP65 waterproofing addresses exposure around the deck. Pre-drilled deck holes and included screws support a straightforward mounting workflow; stainless-steel construction and contacts provide corrosion resistance for marine use.

Skip it if you need a wireless pedal for a Garmin Force motor; Garmin’s Force Foot Pedal is the listed system-specific option.

Anglers with a 12V–24V manual trolling motor can use this pedal to start and stop without reaching for the motor head. Check that the motor is manual and the deck can accept its mounting arrangement.

Listed on Amazon as: Haoguo Trolling Motor Foot Control Switch, 12V-24V 50A DC, IP65 Waterproof, Anti-Stick, Non-Slip Marine-Grade Corrosion-Resistant Pedal for Manual Trolling Motors

#2 · Best Continuous Control

2. Five Oceans FO4601

• Material: High-Impact ABS Plastic

Best for: Continuous control with pre-wiring.

Why it ranks #2: This manual-motor switch supports 12–24 volts and up to 50 amps DC, with an on-lever continuous control system and included stainless-steel screws.

A flip-lever continuous-control system lets the Five Oceans FO4601 keep a manually operated trolling motor running without repeated foot presses. Rated up to 50 amps DC and specified for 12–24 volts, it combines sustained operation with a broad voltage range for anglers who want hands-free motor control.

The on-lever continuous control supports a workflow beyond momentary activation, while the 50A DC rating defines its stated current capacity. Its 12–24-volt specification covers those manual trolling-motor systems, and IP65 waterproofing is listed for marine use. The switch comes pre-wired with four stainless-steel screws, which can simplify deck installation by supplying connection preparation and mounting hardware. High-impact ABS plastic forms the housing, a practical material detail for choosing a marine foot switch.

Skip it if you need stainless-steel switch contacts specifically; Haoguo’s ZL-084 lists stainless-steel contact material.

Anglers with a compatible 12–24-volt manual trolling motor can favor this switch when continuous-on operation and pre-wired installation matter. Its high-impact ABS construction and stated IP65 protection suit marine use, while the listed control remains for manual motors.

Listed on Amazon as: Five Oceans Trolling Motor Foot Switch with On Lever Continuous Control, Rated to 50 Amps DC, 12-24-Volts, Black Polycarbonate, Waterproof IP65 – FO4601

#3 · Best Tilted Pedal

3. Seachoice 28101

• Operating Voltage: 12 V
• Material: ABS Plastic
• Compatible Devices: Manually operated trolling motors (up to 50…
• dimensions: 9.25 x 11.75 x 6.5 in

Best for: Continuous-on manual motor control.

Why it ranks #3: Its 50A DC rating, 15-degree tilt, and flip lever for continuous on make it a well-specified option for manually operated trolling motors.

A flip lever for continuous-on operation distinguishes the Seachoice 28101 from a foot switch limited to momentary presses. Its 15-degree tilt and rating up to 50 amps DC support foot-operated control of manually operated trolling motors, letting anglers engage the motor without reaching its head.

Pressing the switch with a foot starts the manually controlled motor, while the flip lever maintains continuous-on operation when a sustained setting is useful. The 15-degree tilt is specified for ease of operation, giving the pedal an angled approach underfoot. Its 50-amp DC rating and stated manual-motor compatibility define the electrical and use boundaries. ABS plastic construction and the listed 12-volt operating voltage are relevant when checking the switch against a boat’s system.

Skip it if you need explicit 12V–24V coverage; Haoguo’s ZL-084 lists compatibility with both 12V and 24V manual motors.

Choose this for a manually operated trolling motor when a continuous-on lever and angled foot switch suit your workflow. Its supplied voltage specification is 12 volts, so it is not the clearest match for buyers needing an explicitly stated 24-volt range.

Listed on Amazon as: Seachoice Foot Control Switch For Manually Operated Trolling Motors, Rated Up to 50 Amps DC

#4

4. T-H Marine FCS-2-DP

• Operating Voltage: 1 Kilovolts
• Material: Plastic
• Compatible Devices: Trolling Motors
• dimensions: 2.5 x 5.75 x 7.75 in

Best for: Anglers wanting continuous-on control.

Why it ranks #4: This manual-motor switch is rated up to 50 amps DC and lists a 15-degree tilt plus a flip lever for continuous-on operation.

A flip lever for continuous-on operation gives the T-H Marine FCS-2-DP an option beyond pressing the pedal for motor activation. The switch is rated up to 50 amps DC and has a 15-degree tilt, combining a stated current limit with an angled foot-control surface for manually operated trolling motors.

The foot press lets users turn on a manually operated trolling motor without reaching its head, and the flip lever provides continuous-on operation when sustained activation is needed. A 15-degree tilt is specified for ease of operation, shaping the pedal’s underfoot approach. Its 50A DC rating helps define electrical suitability, while plastic construction and stainless-steel contact material are listed. The supplied information does not provide a 12V–24V range, so voltage matching needs particular attention.

Skip it if you need explicit 12V–24V compatibility; Five Oceans’ FO4601 lists a 12–24-volt range and continuous control.

This fits anglers seeking a 50A-rated foot switch with continuous-on control for a manually operated trolling motor. Its tilt and contact material are specified, but buyers should establish voltage compatibility before selecting it for their boat.

Listed on Amazon as: T-H Marine FCS-2-DP Sure Foot Trolling Motor Foot Switch

#5

5. ONTISIV Foot Switch

• Material: Polycarbonate

Best for: Corrosion-resistant manual motor switch.

Why it ranks #5: The listed 12V–24V range and 50A capacity suit manual motors, and the product description specifies IP65 waterproofing and anti-stick operation.

ONTISIV combines a stated 12V–24V range with a 50A capacity for foot-operated control of manual trolling motors. Pressing the pedal starts or stops the motor without touching its head, enabling hands-free operation while fishing or navigating, with compatibility described from lightweight inflatable boats to heavier fishing vessels.

The wide-voltage specification accommodates compatible manual motors operating at 12 or 24 volts, while the 50A capacity addresses its stated high-current use. IP65 waterproofing and corrosion-resistant construction are relevant for a marine deck, and the anti-stick, instant-response claims focus on consistent pedal operation. The polycarbonate material is specified, but the supplied details do not give dimensions or mounting hardware, so installation planning may require information beyond this listing.

Skip it if you want listed screws and pre-drilled mounting details; Haoguo’s ZL-084 specifies deck holes and included screws.

This is a candidate for boaters who need a 12V–24V, 50A foot switch for a manual trolling motor in marine conditions. Buyers planning a deck installation should note that dimensions and mounting hardware are not specified here.

Listed on Amazon as: Trolling Motor Foot Switch, 12V-24V 50A, IP65 Waterproof, Corrosion Resistant, Anti-stick, Instant Response For Manual Motors

#6

6. Pirjeco Foot Control Switch

• Operating Voltage: 24 V
• Material: Plastic
• Compatible Devices: Trolling Motor
• dimensions: 8.99 x 11 x 6.5 in

Best for: Inclined pedal for fishing boats.

Why it ranks #6: It lists 12V–24V compatibility for manual trolling motors, an IP65 waterproof rating, and an inclined, anti-slip pedal for foot operation.

An inclined, anti-slip pedal gives Pirjeco’s switch a foot-operated way to start and stop a manual trolling motor without bending toward the motor head. Its stated 12V–24V range addresses a broad span of manual systems, making hands-free control the central reason to consider it for boat fishing.

The ergonomic incline is described as fitting foot posture, while the anti-slip surface supports deliberate pressing during operation. Foot activation keeps hands available for fishing or sailing, and the ON-OFF-ON operating mode identifies its control style. The listed voltage range is 12V–24V, with compatibility described for most mainstream manual trolling motors. Plastic construction and metal contact material are specified, but no current rating is provided in the supplied details.

Skip it if you require a stated 50A rating; Seachoice’s 28101 explicitly lists up to 50 amps DC.

This suits boaters seeking foot-operated control for a compatible 12V–24V manual trolling motor, particularly when fishing or sailing. The supplied information does not specify an amperage rating, so that detail matters when selecting for a particular motor.

Listed on Amazon as: Trolling Motor Foot Control Switch 12V 24V 50 Amps DC Remote Control Trolling Motor Waterproof IP65 Foot Switch for Manual Trolling Motors

#7

7. Baoezo Foot Control Switch

• Operating Voltage: 24 V
• Material: Plastic
• Compatible Devices: Trolling Motor
• dimensions: 8.99 x 11 x 6.5 in

Best for: Pre-drilled marine deck installation.

Why it ranks #7: This manual-motor switch lists 12V–24V operation and up to 50A, with a 15-degree anti-slip pedal and pre-drilled mounting points.

Baoezo pairs a standard deck mounting-hole pattern with pre-drilled screw points, giving installers specific mounting details alongside its 12V–24V, 50A manual-motor rating. The 15-degree angled anti-slip pedal and marine-grade corrosion-resistant housing target hands-on deck control in boat environments.

The pre-drilled screw points and standard hole pattern can simplify placement on a compatible deck, while terminal lead connections define the listed wiring approach. Its stated 12V–24V range and 50A capacity frame electrical compatibility with manual trolling motors. A silicone-sealed PCB and corrosion-resistant housing address marine exposure, and the anti-slip 15-degree pedal supports foot operation. Plastic is the listed material, so buyers can weigh that construction alongside the marine-protection claims.

Skip it if you want a stated stainless-steel switch body and contacts; Haoguo’s ZL-084 lists stainless-steel construction and contact material.

Boat owners installing a compatible 12V–24V manual trolling motor can value the defined mounting pattern and terminal leads. Its marine protection features support deck use, while the listed plastic construction may not suit buyers seeking metal materials.

Listed on Amazon as: Trolling Motor Foot Control Switch 12V-24V 50A

#8 · Best Minn Kota Replacement

8. Minn Kota 2264040 Switch

• Material: The 'material' attribute is not explicitly…

Best for: Minn Kota pedal-switch replacement.

Why it ranks #8: It is a momentary switch with screw terminals and lists fit for specified Minn Kota All Terrain, Edge, and Maxxum/SC foot-controlled models.

Screw terminals and momentary foot operation define the Minn Kota 2264040 as a switch component rather than a universal deck pedal. Its listed fit covers specified Minn Kota All Terrain, Edge, and Maxxum/SC foot-controlled models, making model-family compatibility the key selection point.

The screw-terminal connection is relevant for buyers replacing a compatible switch component, while momentary operation identifies how the pedal activates the motor. The listing names All Terrain foot-controlled models from 1994–2008, Edge models from 2006 onward, and Maxxum/SC models. Those model-family boundaries make it important to match the existing motor before purchase. The supplied information does not give a voltage or amperage rating, so it should not be treated as a general-purpose 12V–24V switch.

Skip it if you need a universal manual-motor deck switch; Seachoice’s 28101 lists manually operated motors up to 50A DC.

This is for owners servicing a compatible Minn Kota foot-controlled motor who need a momentary switch with screw terminals. Match the exact motor family and model boundaries; the supplied details do not establish universal voltage or current compatibility.

Listed on Amazon as: Minn Kota 2264040 Switch – Momentary, Foot Pedal, W/Screw Terminals

#9

9. T-H Marine FCS-3-DP

• Compatible Devices: Boats with Transom Mount
• dimensions: 6 x 4 x 1 in

Best for: Transom-mount boat switch.

Why it ranks #9: The listing identifies it as a Sure Foot trolling motor switch and says it is compatible with boats with transom mount, but provides few operating details.

Compatibility with boats using a transom-mount trolling motor is the clearest supplied distinction for the T-H Marine FCS-3-DP. Its compact listed dimensions of 6 by 4 by 1 inches provide a useful reference when considering deck space, although the available product details do not describe its control modes or electrical rating.

The transom-mount boat compatibility gives buyers a specific starting point for assessing whether this switch belongs in their motor setup. At 6 by 4 by 1 inches, its listed dimensions can help with space planning before installation. The product is identified as a Sure Foot trolling motor foot switch, but the supplied details do not state amperage, voltage, mounting hardware, or whether it includes a continuous-on lever; those details limit compatibility assessment.

Skip it if you require a stated 50A rating and continuous-on lever; T-H Marine’s FCS-2-DP lists both.

This may suit a boat owner evaluating a foot switch for a transom-mount setup who can verify the electrical requirements separately. Its listed dimensions aid space planning, but the supplied information does not establish voltage, amperage, or control mode.

Listed on Amazon as: T-H Marine – FCS-3-DP – SURE FOOT TROLLING MOTOR FOOT SWITC

#10

10. Garmin Force Foot Pedal

• Material: Plastic

Best for: Wireless Garmin Force pedal control.

Why it ranks #10: This wireless pedal is specifically for the Garmin Force trolling motor, not a general manual-motor switch, so it fits a narrower system.

Wireless operation is the defining feature of Garmin’s Force foot pedal, providing instant control and responsiveness while retaining the feel and steering of a cable-steered pedal. It is specifically for the Force trolling motor, with AA batteries or a hardwired installation offered as power options.

Wireless control removes the need for a pedal cable, while the described cable-steered feel offers a familiar steering style for users of the Force motor. The pedal operates on AA batteries, or buyers can choose hardwire installation, providing two power arrangements. Its compatibility is specifically stated for Garmin Force, rather than manual trolling motors generally. The listed manual and automatic operation modes and 5.5-pound weight also help buyers consider operation and handling.

Skip it if you use a standard manual trolling motor; Haoguo’s ZL-084 lists 12V–24V manual-motor compatibility.

Garmin Force owners wanting wireless foot steering and a choice of AA batteries or hardwiring are the intended buyers. This is a Force-specific pedal, so it is not the general-purpose switch choice for manual trolling motors.

Listed on Amazon as: Garmin Foot Pedal for Force Trolling Motor