A strong RV slide-out jack set provides a height range that matches your extended slide, a stated load capacity, and a stable contact point; it suits RV owners who want to limit movement while parked. The options here range from four-jack sets with 21-to-49-inch adjustment to compact screw jacks with shorter travel, plus drill-compatible and hand-crank designs. The Garvee 4-Pack Quick-Lift leads for its four included jacks, 21.1-to-49-inch range, and listed 20,000-pound capacity.
That capacity is the product’s stated set capacity, not a verified per-jack figure. Compare the listing specifications with your RV’s requirements, measure the support height, and follow the vehicle and jack manufacturers’ instructions before use.
These supports stabilize a slide-out; they are not a substitute for leveling or stabilizing the whole RV.
The Garvee 4-Pack Quick-Lift is the leading choice because it includes four jacks, adjusts from 21.1 to 49 inches, and lists a 20,000-pound load capacity. Its drill-compatible socket and hand crank offer two adjustment methods. Check the product’s stated capacity and your RV manufacturer’s guidance before choosing it; the listing does not clarify whether the capacity applies to each jack or the set.
If you need a flat support block, consider the Garvee 4-Pack Flat-Top instead.
Our Top Picks
Best OverallIncludes four jacks, a crank and drill socket, adjusts from 21.1 to 49 inches, and lists a 20,000-pound capacity.
View on Amazon
Best Flat-Top SetFour-jack set combines a flat top support block with 21-to-49-inch adjustment and a 10,000-pound listed capacity.
View on Amazon
Best Two-Jack KitTwo supports include a flat top block, drill socket, and hand crank; each jack has a listed 5,000-pound capacity.
View on Amazon- Wide Height Range VEVOR Slide Out Jacks
- 6000-Pound Capacity RVshark RS1232 Jacks
Compare RV Slide-Out Support Jack Options
| # | Product | Weight | Load Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. Garvee 4-Pack Quick-LiftBest Overall | 40 lb | 20000 lb | Alloy Steel | RV | View on Amazon |
| 2 | 2. Garvee 4-Pack Flat-TopBest Flat-Top Set | 41.2 lb | 10000 lb | Alloy Steel | RV | View on Amazon |
| 3 | 3. Kohree Flat-Top SupportsBest Two-Jack Kit | 18.3 lb | 5000 lb | Stainless Steel | Camper, Motorhome, RV, Trailer | View on Amazon |
| 4 | 4. VEVOR Slide Out JacksWide Height Range | 16.3 lb | 5000 lb | Alloy Steel | RV | View on Amazon |
| 5 | 5. RVshark RS1232 Jacks6000-Pound Capacity | — | 6000lbs lb | Alloy Steel | Car, RV, Trailer | View on Amazon |
| 6 | 6. Kohree Slide Out SupportsWide-range drill-adjustable pair | 18.7 lb | 5000 lb | Steel | Camper, RV, Trailer | View on Amazon |
| 7 | 7. AUH Drill-Adjust JacksStability-focused alloy pair | 13.5 lb | 5E+3 lb | Alloy Steel | ATV, RV, Trailer, UTV | View on Amazon |
| 8 | 8. SKYFISH Rubber-Pad JacksRubber-top, hand-crank setup | 11.5 lb | 5000 lb | Alloy Steel | Trailer | View on Amazon |
| 9 | 9. LUSHIH 15-26 JacksShort-height trailer support | 8.8 lb | 5000 lb | Alloy Steel | Trailer | View on Amazon |
| 10 | 10. RVshark RS1231 JacksSix-thousand-pound RV pair | — | 6000 lb | Alloy Steel | Car, RV, Trailer | View on Amazon |
Detailed Reviews: Best Jacks For RV Slide Outs

#1 · Best Overall
1. Garvee 4-Pack Quick-Lift
- Weight: 40 lb
- Load Capacity: 20000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Drill-ready four-jack kit.
Why it ranks #1: Includes four jacks, a crank and drill socket, adjusts from 21.1 to 49 inches, and lists a 20,000-pound capacity.
Power-drill or hand-crank adjustment is the key convenience here: the four-jack set lets RV owners choose faster powered lifting or manual operation when positioning slide-out support. Its 21.1-to-49-inch adjustment range also serves a broad span of slide-out heights, while the included crank and magnetic drill socket are ready in the box.
The 21.1-to-49-inch height range helps accommodate differing ground-to-frame measurements, and the stated 20,000-pound set capacity gives buyers a heavy-duty support option. A power drill can speed repeated raising and lowering; the hand crank provides a manual alternative. Because the package includes four jacks, a crank handle, and a magnetic hex socket, the basic operating tools arrive together. Alloy-steel construction and the flat-top support block are listed features for the contact and support setup.
- Four jacks are included in the set.
- Power drill and hand-crank operation are supported.
- Height adjusts from 21.1 to 49 inches.
- Magnetic hex socket and crank handle are included.
- The 40-pound set is heavier to carry than the listed two-jack kits.
Skip it if you need a lighter two-jack set; Kohree’s KR1232 kit weighs 18.3 pounds and includes a flat top block.
Choose this Garvee set if you want four supports, broad height adjustment, and a choice of drill or hand-crank operation. Its 40-pound listed weight is a consideration when moving the kit between storage and setup.
Full product details
| Brand | Garvee |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | RV Slide Out Stabilizer Jacks |
| Item Dimensions | 24.41 x 11.02 x 12.53 inches |
| Item Weight | 40 pounds |
| Load Capacity | 20000 Pounds |
| Manufacturer | Garvee |
| Part Number | PAU_3MCA4F95-MMMM |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Alloy Steel |
| Model Number | PAU_3MCA4F95-MMMM |
| Style Name | Drill-Compatible Quick-Lift |

#2 · Best Flat-Top Set
2. Garvee 4-Pack Flat-Top
- Weight: 41.2 lb
- Load Capacity: 10000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Four-piece flat-top set.
Why it ranks #2: Four-jack set combines a flat top support block with 21-to-49-inch adjustment and a 10,000-pound listed capacity.
Four flat-top support jacks give this Garvee kit a ready-made multi-point setup for slide-outs, while the quick-lift design adjusts from 21 to 49 inches. Drill and hand-crank compatibility adds a choice between powered positioning and manual control during installation.
The 21-to-49-inch telescoping adjustment can suit a wide range of ground-to-slide-out heights, and the flat top blocks provide direct support contact without relying on a separately listed wood block. The product description states up to 20,000 pounds of support, while the specification table lists a 10,000-pound load capacity, so buyers should note that discrepancy. Four jacks arrive as a set, with alloy-steel construction listed.
- Four support jacks are included.
- Height adjusts from 21 to 49 inches.
- Flat top support blocks are included.
- Compatible with both a drill and hand crank.
- The title and product description state 20,000 pounds, but specifications list 10,000 pounds.
Skip it if you want a load figure without conflicting listings; VEVOR’s RV-SOS-5000 is listed at 5,000 pounds per jack.
Consider this Garvee set if four flat-top supports and broad height adjustment match your slide-out setup. Its stated capacity conflicts between the description and specifications, so that uncertainty is an important buying boundary.
Full product details
| Brand | Garvee |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | RV Slide Out Support Jacks |
| Item Dimensions | 24.61 x 10.04 x 12.6 inches |
| Item Weight | 41.2 pounds |
| Load Capacity | 10000 Pounds |
| Manufacturer | Garvee |
| Part Number | PLS_33GSPXAM-e6 |
| Manufacturer Warranty Description | 30 days manufacturer |
| Material | Alloy Steel |
| Model Number | PLS_33GSPXAM-e6 |

#3 · Best Two-Jack Kit
3. Kohree Flat-Top Supports
- Weight: 18.3 lb
- Load Capacity: 5000 lb
- Material: Stainless Steel
- Compatible with Vehicle Type: Camper, Motorhome, RV, Trailer
Best for: Flat-top, drill-ready pair.
Why it ranks #3: Two supports include a flat top block, drill socket, and hand crank; each jack has a listed 5,000-pound capacity.
A flat top support block removes the need for a separate wood block or other added block at the contact point, making this Kohree pair convenient for a simpler setup. The two jacks also accept a power drill through the included socket, with a crank handle supplied for manual adjustment.
The integrated flat top block provides a level support surface without requiring an extra block, which can simplify packing and placement. Drill operation through the supplied socket can speed adjustments compared with relying on a traditional hand crank alone, while the included crank preserves a manual option. The pair is listed for up to 5,000 pounds and compatible with campers, motorhomes, RVs, and trailers, giving buyers multiple vehicle categories to consider.
- Flat top blocks do not require an extra wood block.
- Power-drill socket is included.
- A hand crank is included for manual adjustment.
- Listed compatible vehicles include campers, motorhomes, RVs, and trailers.
- The set contains two jacks, rather than a four-jack set.
Skip it if you need four supports in one package; Garvee’s PAU_3MCA4F95-MMMM set includes four jacks.
This Kohree pair suits RV owners who value an integrated flat support top and want both drill and hand-crank operation. It is a two-jack set, so account for the number of support points your setup calls for.
Full product details
| Brand | Kohree |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Camper, Motorhome, RV, Trailer |
| Included Components | 1x Hand Crank Handle, 1x Socket for the Drill, 2x RV Slide Out Supports Jack |
| Item Dimensions | 21.45 x 9.25 x 5.31 inches |
| Item Weight | 18.3 pounds |
| Load Capacity | 5000 pounds |
| Manufacturer | Kohree |
| Part Number | KR1232-KO-CA-FBA |
| Manufacturer Warranty Description | 2 Months |
| Material | Stainless Steel |
| Model Number | KR1232-KO-US-FBA |
Listed on Amazon as: Kohree RV Slide Out Supports Jack, with Flat Top Support Block, Set of 2
View on Amazon
#4 · Wide Height Range
4. VEVOR Slide Out Jacks
- Weight: 16.3 lb
- Load Capacity: 5000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: RV
Best for: Steel-pipe 20-to-48-inch pair.
Why it ranks #4: Two alloy-steel jacks adjust from 20 to 48 inches and list 5,000 pounds of capacity per support.
A 20-to-48-inch adjustment span lets the VEVOR pair address a wide range of slide-out heights, with each jack rated for up to 5,000 pounds. The two-pack uses 2-millimeter-thick steel pipes, giving buyers a defined material specification alongside its stated support capacity.
The 20-to-48-inch range gives owners room to adjust for varying ground-to-frame heights, while the two-jack package keeps the included support count clear. Each stabilizer is listed for a maximum of 5,000 pounds, and the 2-millimeter steel pipes provide a specific construction detail. Those features suit buyers comparing height reach and per-jack capacity for an RV, camper, or travel trailer. The listing does not identify a drill socket or hand crank as included.
- Adjusts from 20 to 48 inches.
- Each jack supports up to 5,000 pounds.
- Steel pipes are listed as 2 millimeters thick.
- Two jacks are included.
- The listing does not identify a drill socket or hand crank as included.
Skip it if you want both drill and hand-crank tools specified; Kohree’s KR1231 kit includes a socket and crank handle.
This VEVOR pair suits RV and travel-trailer owners needing a 20-to-48-inch range and a stated 5,000-pound rating per jack. Buyers who require included adjustment tools should note they are not specified in the listing.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | 2 x RV Slide Out Jacks |
| Item Dimensions | 20.08 x 5.31 x 5.31 inches |
| Item Weight | 16.3 pounds |
| Load Capacity | 5000 Pounds |
| Manufacturer | VEVOR |
| Part Number | 2 PCS RV Slide Out Support |
| Material | Alloy Steel |
| Model Number | RV-SOS-5000 |
| Style Name | RV Slide Out Support Jacks, 2 Pack |

#5 · 6000-Pound Capacity
5. RVshark RS1232 Jacks
- Load Capacity: 6000lbs lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, RV, Trailer
Best for: Higher-capacity two-jack pair.
Why it ranks #5: This two-jack alloy-steel set lists 6,000 pounds of capacity per jack and offers drill and manual lifting modes.
A listed 6,000-pound capacity per support is the RVshark pair’s defining specification, giving buyers a higher-capacity option than 5,000-pound-per-jack models. Its dual lifting modes support powered operation with a 20-to-24-volt cordless drill or manual adjustment, so setup need not depend on just one method.
The alloy-steel construction and reinforced galvanized tubes are presented alongside the 6,000-pound capacity, connecting the material choice to the product’s stated support role. Dual lift modes let owners use a 20-to-24-volt cordless drill or work manually, which provides flexibility at setup. This is a two-support set, so it suits buyers seeking a pair rather than a four-jack package. The supplied information does not specify an adjustment-height range.
- Listed capacity is 6,000 pounds per jack.
- High-strength alloy steel is specified.
- Reinforced galvanized tubes are specified.
- Power and manual lifting modes are described.
- The supplied listing does not state an adjustment-height range.
Skip it if you need a stated height range before choosing; Kohree’s KR1231 listing specifies adjustment from 20 to 49 inches.
This RVshark pair fits buyers prioritizing the listed 6,000-pound capacity and two lifting modes. The listing does not provide a height range, so it offers less documented guidance for matching a particular slide-out height.
Full product details
| Brand | RVshark |
|---|---|
| Color | Black 4 |
| Compatible with Vehicle Type | Car, RV, Trailer |
| Included Components | 2 RV Slide Out Supports |
| Load Capacity | 6000lbs pounds |
| Manufacturer | RVSHARK |
| Part Number | RS1232 |
| Manufacturer Warranty Description | 60 days |
| Material | Alloy Steel |
| Model Number | RS1232 |
Listed on Amazon as: RV Slide Out Support Jacks, Set of 2, 6000lbs Supports Jack,Black
View on Amazon
#6
6. Kohree Slide Out Supports
- Weight: 18.7 lb
- Load Capacity: 5000 lb
- Material: Steel
- Compatible with Vehicle Type: Camper, RV, Trailer
Best for: Wide-range drill-adjustable pair.
Why it ranks #6: Two supports adjust from 20 to 49 inches and list 5,000 pounds per jack, with both drill and hand-crank operation.
Adjustment from 20 to 49 inches gives this Kohree pair a broad height range for varied RV and trailer setups. The included drill socket supports faster powered raising and lowering, while the supplied hand crank preserves a manual option if you prefer to operate the supports without a drill.
The 20-to-49-inch adjustment range helps accommodate different ground conditions and slide-out heights, reducing the need to choose among narrowly sized supports. Each jack is listed for up to 5,000 pounds, and the set includes two jacks, a crank handle, and a drill socket. That combination supports a flexible setup workflow: use a power drill for adjustment or switch to the hand crank. Steel construction is specified for the pair.
- Adjusts from 20 to 49 inches.
- Each support is rated for up to 5,000 pounds.
- Power-drill socket is included.
- Hand crank is included for manual adjustment.
- The package includes two supports, not four.
Skip it if you need four jacks together; Garvee’s PAU_3MCA4F95-MMMM package contains four supports.
This Kohree pair is a fit for RV owners who need broad height adjustment and want drill or hand-crank operation. Check that two supports and the 5,000-pound-per-jack rating suit your setup.
Full product details
| Brand | Kohree |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Camper, RV, Trailer |
| Included Components | 1x Hand Crank Handle, 1x Socket for the Drill, 2x RV Slide Out Supports Jack |
| Item Dimensions | 21.45 x 9.25 x 5.31 inches |
| Item Weight | 18.7 pounds |
| Load Capacity | 5000 pounds |
| Manufacturer | Kohree |
| Part Number | KR1231-KO-CA-FBA |
| Manufacturer Warranty Description | 30 Days |
| Material | Steel |
| Model Number | Kohree |
| Style Name | Hydraulic |
Listed on Amazon as: Kohree RV Slide Out Supports, Set of 2
View on Amazon
#7
7. AUH Drill-Adjust Jacks
- Weight: 13.5 lb
- Load Capacity: 5E+3 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: ATV, RV, Trailer, UTV
Best for: Stability-focused alloy pair.
Why it ranks #7: The two-jack set lists 5,000 pounds of capacity and a three-year manufacturer warranty, with a drill-adjust design.
An aluminum gearbox and added swivel nuts are AUH’s specific durability features, with the listing also claiming a 30% stability improvement. For RV, trailer, or camper owners seeking drill-adjustable support, this pair is presented as a way to reduce sway while adding a stated 5,000-pound capacity.
The aluminum gearbox and swivel nuts are identified as upgrades intended to improve durability, while the listing’s 30% stability claim gives buyers a concrete performance assertion to weigh. Alloy-steel construction is also specified, and the supports are listed for RVs, trailers, ATVs, and UTVs. At 13.5 pounds for the listed item, this set is lighter than several heavier kits in the supplied product information, which can ease handling during setup.
- Aluminum gearbox is specified.
- Added swivel nuts are specified.
- Listing claims a 30% stability improvement.
- Compatible vehicle types include RV, trailer, ATV, and UTV.
- The supplied listing does not specify an adjustment-height range.
Skip it if you need a documented adjustment span; Kohree’s KR1231 model is listed from 20 to 49 inches.
AUH suits buyers drawn to its gearbox and swivel-nut upgrades and its listed vehicle range. The lack of a stated height range makes it harder to assess fit for a particular slide-out position.
Full product details
| Brand | AUH |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | ATV, RV, Trailer, UTV |
| Included Components | RV Slide Out Supports Jacks |
| Item Dimensions | 5.3 x 3 x 15.94 inches |
| Item Weight | 13.5 pounds |
| Load Capacity | 5E+3 Pounds |
| Manufacturer | AUH |
| Part Number | AUH-0041 |
| Manufacturer Warranty Description | 3 Year Warranty |
| Material | Alloy Steel |
| Model Number | AUH-0041 |
Listed on Amazon as: RV Slide Out Supports Jacks for Camper Trailer Stabilizer, Drill Adjust
View on Amazon
#8
8. SKYFISH Rubber-Pad Jacks
- Weight: 11.5 lb
- Load Capacity: 5000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Rubber-top, hand-crank setup.
Why it ranks #8: Two jacks include rubber-lined U-tops to separate metal from the slide frame and fit stated heights of 21.5 to 40 inches.
A thick rubber pad lining the U-shaped top prevents metal-on-metal contact with the slide-out frame, while the hand-operated top and folding crank let owners raise the jack without a drill. Its stated 21.5-to-40-inch fit range gives a clear height boundary for choosing this pair.
The rubber-lined U-top is described as reducing creaks and rattles while gripping the rail, so it addresses contact as well as support. Turning the top by hand and then using the folding crank keeps setup independent of a drill. The 21.5-to-40-inch range helps buyers compare the supports with their measured frame height, and the listing recommends a board or jack pad on grass, sand, or gravel to prevent the five-inch base from sinking.
- Rubber pads line the U-shaped tops.
- Hand-turning the top and a folding crank are specified.
- Fits slide-out heights from 21.5 to 40 inches.
- Listing recommends a board or jack pad on soft ground.
- The 21.5-to-40-inch range excludes taller slide-out heights.
Skip it if you need adjustment to 48 inches; VEVOR’s RV-SOS-5000 extends from 20 to 48 inches.
This SKYFISH pair suits owners who want rubber contact pads and drill-free hand adjustment within the 21.5-to-40-inch range. Measure the slide-out frame height and plan for a board or pad on soft ground.
Full product details
| Brand | SKYFISH |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | 2 Slide Out Support Jacks with Folding Cranks, 2 Rubber Pads |
| Item Dimensions | 6.69 x 8.27 x 23.62 inches |
| Item Weight | 11.5 pounds |
| Load Capacity | 5000 pounds |
| Manufacturer | LEADBRAND |
| Part Number | ST130 |
| Manufacturer Warranty Description | No |
| Material | Alloy Steel |
| Model Number | ST130L-A2 |
| Style Name | Universal |
Listed on Amazon as: SKYFISH RV Slide Out Support Jacks & Stabilizers Anti-Vibration Rubber Pad
View on Amazon
#9
9. LUSHIH 15-26 Jacks
- Weight: 8.8 lb
- Load Capacity: 5000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Short-height trailer support.
Why it ranks #9: Two lightweight 8.8-pound steel jacks offer 15-to-26-inch travel and a listed 5,000-pound capacity per jack.
A 15-to-26-inch travel range makes the LUSHIH pair a compact-height choice for trailer slide-outs that fall within that span. Each jack is rated for 5,000 pounds, and the steel construction receives a zinc powder coating intended to resist rust and corrosion during use.
The 11-inch working range helps buyers assess whether these supports match their ground-to-frame measurement before setup. Each jack’s 5,000-pound maximum lift capacity is paired with a triangular threaded screw and M18 nut, features the listing connects to stable support. Zinc powder coating on heavy-duty steel is specified for rust and corrosion resistance. The U-shaped tops measure 5.94 by 2.95 by 0.9 inches, providing a defined contact shape for placement.
- Travel range is 15 to 26 inches.
- Each jack has a stated 5,000-pound maximum lift capacity.
- Zinc powder coating is specified for rust and corrosion resistance.
- Triangular threaded screw and M18 nut are specified.
- The 15-to-26-inch travel range is shorter than models extending to 48 or 49 inches.
Skip it if you need taller adjustment; VEVOR’s RV-SOS-5000 adjusts from 20 to 48 inches.
Choose this LUSHIH pair when your trailer’s support height fits the 15-to-26-inch travel range and corrosion-resistant coating matters. Its limited adjustment span makes it a poor match for taller slide-out positions.
Full product details
| Brand | LUSHIH |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | rv stabilizer jacks body |
| Item Dimensions | 16.53 x 7.67 x 6.5 inches |
| Item Weight | 8.8 pounds |
| Load Capacity | 5000 pounds |
| Manufacturer | LUSHIH |
| Part Number | RVJ26 |
| Manufacturer Warranty Description | 6 month manufacturer |
| Material | Alloy Steel |
| Model Number | RVJ26 |
Listed on Amazon as: RV Slide Out Support Trailer Stabilizer Jacks 5000 lbs, 2 Pack 15"-26"
View on Amazon
#10
10. RVshark RS1231 Jacks
- Load Capacity: 6000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Car, RV, Trailer
Best for: Six-thousand-pound RV pair.
Why it ranks #10: This silver two-jack set lists 6,000 pounds of capacity per support and drill or manual lifting, but provides no height range.
The RVshark RS1231 lists 6,000 pounds of capacity per support, making its higher stated rating the main reason to consider this two-jack set. Its dual power and manual lifting modes let owners choose a 20-to-24-volt cordless drill or hand operation when positioning the supports.
High-strength alloy steel and reinforced galvanized tubes are specified alongside the 6,000-pound rating, giving buyers material details to consider with the stated capacity. Dual lifting modes offer a choice of cordless-drill operation using a 20-to-24-volt drill or manual adjustment. The package contains two supports, so it is suited to buyers seeking a pair. The supplied listing does not state a height range, limiting how precisely buyers can compare it to their slide-out measurements.
- Listed capacity is 6,000 pounds per support.
- High-strength alloy steel is specified.
- Reinforced galvanized tubes are specified.
- Power and manual lifting modes are described.
- The supplied listing does not state an adjustment-height range.
Skip it if you need a specified height span; Kohree’s KR1231 listing gives a 20-to-49-inch adjustment range.
Choose the RS1231 if its listed capacity and dual operating modes suit your priorities and a two-jack set is sufficient. Since no adjustment range is stated, height matching remains a key boundary.
Full product details
| Brand | RVshark |
|---|---|
| Color | Silver |
| Compatible with Vehicle Type | Car, RV, Trailer |
| Included Components | 2 RV Slide Out Supports |
| Load Capacity | 6000 Pounds |
| Manufacturer | RVSHARK |
| Part Number | RS1231 |
| Manufacturer Warranty Description | 60 days |
| Material | Alloy Steel |
| Model Number | RS1231 |
Listed on Amazon as: RV Slide Out Support Jacks Set of 2, 6000lbs Heavy Duty Supports
View on AmazonAvoid treating slide supports as leveling jacks
Slide-out supports are for supporting an extended room, not for lifting or leveling the entire RV. A key failure mode is placing a jack under an unsuitable point or tightening it enough to lift the slide structure; the product data does not specify safe contact locations or operating force. Confirm support points and procedures in your RV and jack manuals, and do not assume a larger capacity listing makes any placement safe.
Capacity figures also need careful reading: the Garvee 4-Pack Quick-Lift specifications list 20,000 pounds, while the Garvee 4-Pack Flat-Top title mentions 20,000 pounds and its specifications list 10,000 pounds. The Kohree and VEVOR listings state 5,000 pounds per jack, while some other listings simply give a capacity without clearly identifying whether it is per jack or per set.
Check the listing and manufacturer for clarification before relying on a number.
Ground contact can matter as much as jack height
Soft or uneven ground can undermine a correctly sized jack if its base sinks or the supports do not meet the slide evenly. The SKYFISH Rubber-Pad Jacks listing specifically recommends placing its five-inch base on a board or jack pad on grass, sand, or gravel. It also says to adjust each jack to its own height on uneven ground.
This makes a useful distinction: height adjustment accommodates different clearances, but does not itself create a firm foundation. The SKYFISH set also has a rubber-lined top intended to reduce metal-on-metal contact, whereas the Garvee Flat-Top and Kohree Flat-Top sets provide flat support blocks.
Those designs differ in how they contact the frame; neither listing proves compatibility with every slide-out shape. Check your RV maker’s instructions, use a stable surface, and avoid forcing a support against the slide.
How to Choose RV Slide-Out Support Jacks
Match the height range to your slide
Choose a jack whose working height covers the measured distance from firm ground to the approved support point beneath the extended slide. Listed adjustment spans vary considerably: LUSHIH covers 15 to 26 inches, SKYFISH 21.5 to 40 inches, and Garvee, Kohree, and VEVOR options reach roughly 48 or 49 inches. A shorter range can suit a low-clearance setup, while a taller adjustable set suits higher support points.
Measure with the RV parked and the slide extended as directed by its manufacturer; do not infer fit from the RV type alone. The SKYFISH listing explicitly tells buyers to measure ground to the bottom of the slide-out frame.
Compare capacity with care
Look for a stated load capacity and verify whether it applies to each jack or the complete set. Kohree and VEVOR list 5,000 pounds per support; RVshark lists 6,000 pounds per jack. Garvee’s four-jack listings need extra scrutiny: one specifies 20,000 pounds, while the other’s title and specification differ, with the specification showing 10,000 pounds.
Higher stated capacity may appeal when the RV maker calls for it, while a 5,000-pound-per-jack set may suit buyers whose requirements align with that figure. These listings do not establish the load on an individual slide-out, so follow the RV manufacturer’s requirements rather than treating a capacity headline as a guarantee of fit.
Choose the contact and adjustment style
Consider both how the jack meets the slide frame and how you will adjust it. SKYFISH includes rubber pads on its U-tops, while the Garvee and Kohree flat-top models provide a flat support block. Several sets include a drill socket and hand crank; SKYFISH instead describes hand adjustment at the top and a folding crank.
Drill-compatible models may suit buyers who want powered adjustment, while hand-adjusted designs suit those who prefer not to rely on a drill. Also compare the number of supports: the Garvee sets include four, while most options here include two.
Choose a contact style approved for your RV and a set configuration consistent with its support instructions.
Which RV Slide-Out Jacks Should You Choose?
For a broad height range and a four-jack package, choose the Garvee 4-Pack Quick-Lift: it adjusts from 21.1 to 49 inches and includes a drill socket and hand crank. If a flat support block matters, the Garvee 4-Pack Flat-Top or Kohree Flat-Top Supports offers that design; the latter lists 5,000 pounds per jack. For a two-jack set with a stated 6,000-pound capacity per support, consider RVshark RS1232 Jacks.
VEVOR Slide Out Jacks cover 20 to 48 inches, while LUSHIH 15-26 Jacks suit a shorter measured support height. Choose SKYFISH Rubber-Pad Jacks if rubber-lined contact is a priority and your measured height falls within 21.5 to 40 inches.
Check compatibility and safe placement in your RV manual.
Related Buying Guides
- Best Slide Out Motor For RV
- Best RV Storage Slide Out Tray
- Best Truck Bed Slide Out
- Best Slide Motor For RV
- Best Slide Toppers For RV
- Best Jack For RV Trailer
Frequently Asked Questions
How many slide-out support jacks should I use, and where should I place them?
Use the number and placement specified by your RV manufacturer; there is no universal count or position that suits every slide-out. Check your RV manual before placing supports, and make sure each jack contacts an approved support point. Avoid positioning a jack where it could interfere with the slide mechanism or damage the RV.
How do I measure the correct jack height for my extended slide-out?
Measure the vertical distance from the intended ground contact point to the approved support point while the slide-out is extended and the RV is positioned as instructed in its manual. Compare that measurement with the jack’s adjustment range. Include any required support surface in your measurement, and follow the manufacturer’s guidance.
Can slide-out support jacks be used on soft or uneven ground?
Only use them on ground that can safely support the load and allows stable placement. Soft or uneven ground can make a jack sink, tilt, or shift, so follow your RV and jack manufacturers’ instructions for suitable surfaces and support materials. Do not rely on a support that cannot sit securely.
Should I choose a flat-top support jack or a rubber-pad design?
Choose based on the contact surface your setup requires and the guidance in your RV manual. The Garvee and Kohree flat-top options provide a flat support block, while the SKYFISH listing specifies a rubber pad. Check that the design and adjustment range suit your approved support point before selecting a set.
What should I check before relying on a jack’s listed capacity?
Confirm whether the stated capacity applies to each jack or to the entire set; listings may not make that distinction clear. Compare the capacity with your RV manufacturer’s requirements and follow its placement guidance. For example, the Garvee Quick-Lift listing states 20,000 pounds but does not clarify whether that figure is per jack or for the set.
Final Words
For a broad height range and four included jacks, the Garvee 4-Pack Quick-Lift is the leading choice, with adjustment from 21.1 to 49 inches and both a drill-compatible socket and hand crank. If you want a flat-top design, consider the Garvee or Kohree option; the Kohree lists 5,000 pounds per jack. Match the adjustment range to your measured support height, verify capacity details, and follow your RV manual.


