Best Folding Ramp For Cargo Van: 10 Options Compared

Best Folding Ramp For Cargo Van

A strong folding ramp for a cargo van should reach the van floor at a manageable angle, support the loaded equipment, and fold or store in the space you have. The LEMNISCATE 7.5FT Folding Loading Ramps lead this lineup with an 89.9-inch length, 12-inch width, aluminum construction, and 1,500-pound stated capacity for the pair. Other options range from lightweight 47.2-inch aluminum ramps to wide tri-fold platforms, so the best fit depends on your van’s loading height, the equipment’s wheel spacing, and where you can secure the ramp.

Check each product’s capacity basis and connection style before buying: listed capacities are not presented consistently, and several models are designed primarily for trucks or trailers rather than specifically for cargo vans.

The LEMNISCATE 7.5FT Folding Loading Ramps are the strongest match here for a cargo van because their 89.9-inch length can provide a gentler approach than shorter options, while the 12-inch-wide aluminum ramps have a stated 1,500-pound capacity. They fold to 45 inches and weigh 17.64 pounds per pair according to the product details. Confirm that the ramp ends fit your van’s loading edge and that its capacity suits your equipment before use.

Our Top Picks

LEMNISCATE Folding RampsBest Overall

LEMNISCATE Folding Ramps

The 89.9-inch aluminum pair is longer and wider than most listed options, carries a stated 1,500 pounds, and folds to 45 inches for storage.

View on Amazon
Arejonner 72.5-Inch RampsBest With Straps

Arejonner 72.5-Inch Ramps

This 72.5-inch pair has a 1,500-pound capacity, perforated traction surfaces, and four safety straps, useful when securing separate ramps matters.

View on Amazon
Arejonner Sandblasted RampsTraction-Focused

Arejonner Sandblasted Ramps

The 71-inch alloy-steel pair combines a 1,500-pound capacity with perforations, a sandblasted finish, and four safety straps.

View on Amazon

Compare cargo van ramp options and key differences

#ProductDimensionsLoad CapacityMaterialBuy
189.9"L x 12"W x 2"H1500 lbAluminumView on Amazon
272.5"L x 8.7"W x 1.8"H1500 lbAlloy SteelView on Amazon
371"L x 8.86"W x 3.5"H1500 lbAlloy SteelView on Amazon
469.5"L x 8.86"W x 1.57"H2200 lbAlloy SteelView on Amazon
570"L x 9"W x 2.1"H880 lbHigh Density Polyethylene (HDPE)View on Amazon
6
Evcitn Truck Ramps6. Evcitn Truck RampsLong-reach truck ramp pair
78.7"L x 47.2"W x 7.5"H1500 lbIron, Metal, Plastic, Stainless SteelView on Amazon
7
VEVOR Tri-Fold Ramps7. VEVOR Tri-Fold RampsWide tri-fold loading platform
76.2"L x 53.9"W x 1.7"H1500 lbAluminum Alloy (Grade: 6061-T6)View on Amazon
8
KOLOTOOL Tri-Fold Ramp8. KOLOTOOL Tri-Fold RampOne-person tri-fold setup
75.98"L x 50"W x 1.97"H1500 lbAluminumView on Amazon
9
ATAUEFHEY Tri-Fold Ramp9. ATAUEFHEY Tri-Fold RampWide-platform trailer loading
77"L x 54"W x 1"H1.5E+3 lb—View on Amazon
10
Loezora 47-Inch Ramps10. Loezora 47-Inch RampsLightweight shed-to-van hauling
47.2"L x 8.5"W x 2"H880 lbAluminumView on Amazon

Detailed Reviews: Best Folding Ramp For Cargo Van

LEMNISCATE Folding Ramps

#1 · Best Overall

1. LEMNISCATE Folding Ramps

  • Dimensions: 89.9"L x 12"W x 2"H
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: Long, wide aluminum tracks.

Why it ranks #1: The 89.9-inch aluminum pair is longer and wider than most listed options, carries a stated 1,500 pounds, and folds to 45 inches for storage.

At 89 inches long and 12 inches wide when open, the LEMNISCATE pair offers an extended, broad track for loading equipment into pickup trucks. The aluminum ramps fold to 45 by 12 inches and have a stated 1,500-pound capacity, combining substantial open dimensions with a reduced folded footprint.

The 89-by-12-inch open dimensions create long, wide tracks for loading, while the folded 45-by-12-inch form eases storage compared with the open footprint. Lightweight aluminum is specified, and the product features raised holes intended to improve traction while preventing water buildup. The ramps are described as rust resistant and easy to clean, useful details for outdoor equipment loading. Their 1,500-pound capacity provides the stated limit for the pair; the 12-inch width and folded length remain practical storage considerations.

Pros
  • 89-inch open length
  • 12-inch open width
  • Folds to 45 by 12 inches
  • Raised holes support traction and water drainage
Cons
  • The folded ramp remains 12 inches wide, requiring storage space for that width.

Skip it if you need a 54-inch-wide shared loading platform; ATAUEFHEY's tri-fold ramp provides that listed width.

Pick these for buyers who need long, wide aluminum tracks and a pair rated for 1,500 pounds. Their folded 45-by-12-inch dimensions still require space in a van, truck bed, or storage area.

Full product details
BrandLEMNISCATE
ColorBlack
Dimensions89.9"L x 12"W x 2"H
Item Weight36.4 pounds
Load Capacity1500 Pounds
ManufacturerLEMNISCATE
Part NumberLSLR001M–A-XTWB-B
MaterialAluminum
Model NumberBlack-2 PCS/1500 LBS/7.5 FT

Listed on Amazon as: 7.5FT Folding Loading Ramps for Pickup Trucks, Black, 2PCS

View on Amazon
Arejonner 72.5-Inch Ramps

#2 · Best With Straps

2. Arejonner 72.5-Inch Ramps

  • Dimensions: 72.5"L x 8.7"W x 1.8"H
  • Load Capacity: 1500 lb
  • Material: Alloy Steel

Best for: Traction-focused equipment loading.

Why it ranks #2: This 72.5-inch pair has a 1,500-pound capacity, perforated traction surfaces, and four safety straps, useful when securing separate ramps matters.

A dense perforated steel surface gives the Arejonner ramps added tire grip, helping load motorcycles, mowers, ATVs, and other equipment in varied weather. The two 72.5-inch ramps carry a stated 1,500-pound capacity and come with four safety straps, making them a practical option for shed, garage, or trailer loading.

The perforated surface is intended to reduce wheel slip, while the included four straps secure the ramps during loading; together, those features address traction and positioning in one setup. Alloy-steel construction and a 1,500-pound capacity suit a range of listed equipment, including UTVs and snow blowers. At 72.5 inches long and 8.7 inches wide, each ramp provides a defined loading path, though the pair weighs 34.1 pounds, a consideration when carrying or repositioning them.

Pros
  • Dense perforated surface for traction
  • Four safety straps included
  • Protective gloves included
  • 72.5-inch alloy-steel ramps with 1,500-pound capacity
Cons
  • The 34.1-pound pair is a substantial carry for frequent repositioning.

Skip it if you need a lighter pair to carry between jobs; Loezora's 47.2-inch aluminum ramps weigh 11.7 pounds together.

Choose these for loading varied equipment into a shed, garage, or trailer when traction features and supplied securing straps matter. Their 34.1-pound pair weight is worth considering if one person will move them often.

Full product details
BrandArejonner
ColorSilver
Dimensions72.5"L x 8.7"W x 1.8"H
Item Weight34.1 pounds
Load Capacity1500 Pounds
ManufacturerArejonner
Part Number03
MaterialAlloy Steel
Model Number03

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

View on Amazon
Arejonner Sandblasted Ramps

#3 · Traction-Focused

3. Arejonner Sandblasted Ramps

  • Dimensions: 71"L x 8.86"W x 3.5"H
  • Load Capacity: 1500 lb
  • Material: Alloy Steel

Best for: Sandblasted steel ramp pair.

Why it ranks #3: The 71-inch alloy-steel pair combines a 1,500-pound capacity with perforations, a sandblasted finish, and four safety straps.

A sandblasted finish paired with dense perforations gives this Arejonner ramp set two traction-focused surface features for loading equipment. The pair has a stated 1,500-pound capacity and includes four safety straps and protective gloves, offering a ready-to-secure setup for motorcycles, lawn mowers, ATVs, and UTVs.

The sandblasted finish and perforated surface are both specified to improve grip and help prevent wheel slipping, a useful combination when loading listed equipment. Four straps secure the ramps in place, while the included gloves support handling during installation. Alloy-steel construction and a 1,500-pound capacity serve a broad mix of vehicles and equipment. At 71 inches long and 8.86 inches wide, these ramps provide individual loading tracks; the pair weighs 34.1 pounds, which affects carrying and repositioning.

Pros
  • Sandblasted finish and perforated surface
  • Four safety straps included
  • Protective gloves included
  • 1,500-pound capacity and alloy-steel construction
Cons
  • The 34.1-pound pair is relatively heavy to carry and reposition.

Skip it if you need a lightweight ramp pair for frequent carrying; Loezora's aluminum pair weighs 11.7 pounds and folds to 2 inches.

These suit buyers who want traction-focused steel ramps with straps for loading equipment into a van, trailer, or garage. Their 71-inch length and 34.1-pound pair weight are important handling considerations.

Full product details
BrandArejonner
ColorBlack
Dimensions71"L x 8.86"W x 3.5"H
Item Weight34.1 pounds
Load Capacity1500 pounds
ManufacturerArejonner
MaterialAlloy Steel
Model NumberHM42

Listed on Amazon as: 72.5" Heavy Duty Folding Loading Ramps with Sandblasted Finish, 1500lb Capacity, Ideal for Motorcycles, Lawn Mowers, ATVs, UTVs, and More – Pack of 2 with Safety Straps and Gloves

View on Amazon
Stalwart Folding Ramps

#4 · Highest Capacity

4. Stalwart Folding Ramps

  • Dimensions: 69.5"L x 8.86"W x 1.57"H
  • Load Capacity: 2200 lb
  • Material: Alloy Steel

Best for: High-capacity two-ramp loading.

Why it ranks #4: Its 69.5-inch alloy-steel pair lists 2,200 pounds combined capacity, exceeding the other separate-ramp sets in this roundup.

A 2,200-pound combined rating gives the Stalwart pair a higher stated capacity than many two-ramp options in this selection. Each 69-inch alloy-steel ramp carries 1,100 pounds individually, serving motorcycles and dirt bikes separately or four-wheeled equipment loaded across both ramps into a truck, trailer, or shed.

The two ramps can be used separately for motorcycles and dirt bikes, or together for four-wheeled vehicles, giving the set flexibility across the listed tasks. Each alloy-steel ramp measures 69.5 inches long and 8.86 inches wide and has a 1,100-pound capacity; together, the pair is rated for 2,200 pounds. Stalwart recommends a usage height of 34 inches. The low-profile design supports truck, trailer, or shed loading, while the 30.9-pound set weight matters when carrying it.

Pros
  • 2,200-pound combined capacity
  • 1,100-pound capacity per ramp
  • 69.5-inch ramp length
  • Can be used separately or together
Cons
  • The recommended usage height is limited to 34 inches.

Skip it if you need a stated height range rather than a 34-inch recommendation; VEVOR specifies 3.9–31.5 inches for its tri-fold set.

Choose this set for buyers loading motorcycles individually or four-wheeled equipment as a pair, with a 2,200-pound combined rating. The recommended 34-inch usage height is the key boundary to check for your loading setup.

Full product details
BrandStalwart
ColorSilver
Dimensions69.5"L x 8.86"W x 1.57"H
Item Weight30.9 pounds
Load Capacity2200 Pounds
ManufacturerTrademark Global
Part Number75-CAR2025
MaterialAlloy Steel
Model Number75-CAR2025

Listed on Amazon as: Loading Ramps – Set of Two 69-Inch Folding Ramps for ATVs, Motorcycles, Mowers, Carts, and More – 2200lb Combined Capacity Car Ramp Set by Stalwart

View on Amazon
DNA MOTORING Folding Ramps

#5 · Portable Pick

5. DNA MOTORING Folding Ramps

  • Dimensions: 70"L x 9"W x 2.1"H
  • Load Capacity: 880 lb
  • Material: High Density Polyethylene (HDPE)

Best for: Portable maintenance ramp pair.

Why it ranks #5: The 70-inch HDPE ramps support 880 pounds per pair and fold to 37 inches, with an integrated handle for carrying.

A built-in carry handle and fold-down size of 37 by 8.75 inches make DNA MOTORING's ramps convenient to move and stow in a car or utility trunk. Each 70-inch ramp supports 440 pounds, or 880 pounds per pair, for listed motorcycle, ATV, mower, and tractor loading or maintenance tasks.

The ramps open to 70 by 9 inches, providing a defined track for loading or maintenance, and fold to 37 by 8.75 inches for more compact storage. An integrated handle supports carrying the folded ramp, while the extended headboard attaches to the rear fender for the transition during loading and unloading. The stated capacity is 440 pounds per ramp and 880 pounds per pair. High-density polyethylene construction distinguishes this set from metal ramps, with the stated rating guiding load selection.

Pros
  • Folds to 37 by 8.75 inches
  • Integrated carry handle
  • Extended headboard attaches to the rear fender
  • 880-pound pair capacity
Cons
  • The 880-pound pair capacity is lower than 1,500-pound-rated options.

Skip it if you need a higher stated capacity for heavier equipment; KOLOTOOL's aluminum tri-fold ramp is rated for 1,500 pounds.

These suit buyers who value a carry handle and compact folded storage for lighter equipment or maintenance use. Keep the 440-pound per-ramp and 880-pound pair ratings in view when selecting a load.

Full product details
BrandDNA MOTORING
ColorSilvery
Dimensions70"L x 9"W x 2.1"H
Item Weight16.08 kg
Load Capacity880 pound
ManufacturerDNA MOTORING
Part NumberTOOLS-00819
MaterialHigh Density Polyethylene (HDPE)
Model NumberTOOLS-00819

Listed on Amazon as: DNA Motoring Heavy Duty Folding Ramps, 880 lbs Capacity 70" x 9", Multi Use Ramp for Motorcycle, ATV, Lawn Mower, Tractor Loading and Maintenance, Home & Commercial, TOOLS-00819

View on Amazon
Evcitn Truck Ramps

#6

6. Evcitn Truck Ramps

  • Dimensions: 78.7"L x 47.2"W x 7.5"H
  • Load Capacity: 1500 lb
  • Material: Iron, Metal, Plastic, Stainless Steel

Best for: Long-reach truck ramp pair.

Why it ranks #6: These long ramps measure 78.7 inches in the specifications and list a 1,500-pound capacity per pair, but their 36.4-pound weight limits portability.

The Evcitn ramps extend 75 inches, offering a longer loading path for lawn mowers, motorcycles, dirt bikes, and ATVs. Their reinforced construction and professional welding support a stated 1,500-pound pair capacity, while textured treads and perforations provide a non-slip surface for rolling equipment toward a truck or trailer.

The 75-inch ramp length gives equipment a longer path to the vehicle, and the stated 1,500-pound capacity per pair covers the listed mower and powersports uses. Reinforced construction and professional welding support that load rating, while textured treads and perforated designs are specified to improve traction. The product is described as heavy-duty stainless steel construction. Its listed dimensions are 78.7 by 47.2 by 7.5 inches, so buyers should account for the substantial overall footprint when transporting or storing it.

Pros
  • 75-inch ramp length
  • 1,500-pound capacity per pair
  • Textured treads and perforated surface
  • Reinforced construction with professional welding
Cons
  • The listed 78.7-by-47.2-by-7.5-inch dimensions make storage space a consideration.

Skip it if you need a compact ramp that folds to a stated small size; DNA MOTORING's ramps fold to 37 by 8.75 inches.

Choose this pair for truck owners moving listed mowers or powersports equipment who want a long ramp path and 1,500-pound pair rating. Its listed dimensions make storage space a key fit consideration.

Full product details
BrandEvcitn
ColorBlack
Dimensions78.7"L x 47.2"W x 7.5"H
Item Weight36.4 pounds
Load Capacity1500 Pounds
ManufacturerEvcitn
Part NumberRP001-1.8M-2PCS-SV-01
MaterialIron, Metal, Plastic, Stainless Steel
Model NumberGCT001

Listed on Amazon as: Truck Ramps 75" 1500 LBS 2 Pack, Extra Heavy Duty Loading Ramps for Lawn Mower, Portabe Non Slip Motorcycle Ramps for Pickup Trucks, ATV, Dirt Bikes, UTV

View on Amazon
VEVOR Tri-Fold Ramps

#7

7. VEVOR Tri-Fold Ramps

  • Dimensions: 76.2"L x 53.9"W x 1.7"H
  • Load Capacity: 1500 lb
  • Material: Aluminum Alloy (Grade: 6061-T6)

Best for: Wide tri-fold loading platform.

Why it ranks #7: The 76.2-by-53.9-inch aluminum platform has a 1,500-pound capacity and includes straps and non-slip rubber fingers, but weighs 50.9 pounds.

A 76-inch tri-fold aluminum platform opens wide for loading, then folds for storage, combining a broad approach with a more compact stowed form. VEVOR states a 1,500-pound capacity for the set of three ramps and recommends a loading height from 3.9 to 31.5 inches for listed vehicles and equipment.

The 76.2-by-53.9-inch unfolded platform gives vehicle tires a wide loading area, while the tri-fold design makes storage more manageable after use. VEVOR specifies that each aluminum ramp supports 500 pounds and the set of three supports up to 1,500 pounds; buyers should account for that per-ramp limit as well as the combined rating. The extended ramp creates a gentler slope, and the stated recommended height range is 3.9 to 31.5 inches. The set weighs 50.9 pounds.

Pros
  • Tri-fold wide platform
  • Aluminum alloy construction
  • 500-pound capacity per ramp and 1,500-pound set capacity
  • Recommended loading height of 3.9–31.5 inches
Cons
  • The 50.9-pound set is heavy to lift and reposition.

Skip it if you want a lighter two-ramp set; Stalwart's pair weighs 30.9 pounds and has a 2,200-pound combined capacity.

This fits buyers needing a wide platform for listed vehicles or equipment and whose loading height falls within 3.9 to 31.5 inches. Account for the 50.9-pound set and 500-pound limit per ramp.

Full product details
BrandVEVOR
ColorWhite
Dimensions76.2"L x 53.9"W x 1.7"H
Item Weight50.9 pounds
Load Capacity1500 Pounds
ManufacturerVEVOR
Part NumberUT-6803-4
MaterialAluminum Alloy (Grade: 6061-T6)
Model NumberUT-6803-4

Listed on Amazon as: VEVOR Aluminum Trailer Ramps, 76 x 54 in Tri-Folding Truck Ramps with Straps & Non-Slip Rubber Fingers, 1500LBS Capacity ATV Loading Ramps for Pickup Trucks, Motorcycles, Lawn Mowers, Tractors, Carts

View on Amazon
KOLOTOOL Tri-Fold Ramp

#8

8. KOLOTOOL Tri-Fold Ramp

  • Dimensions: 75.98"L x 50"W x 1.97"H
  • Load Capacity: 1500 lb
  • Material: Aluminum

Best for: One-person tri-fold setup.

Why it ranks #8: This 75.98-by-50-inch aluminum platform folds for storage and lists a 1,500-pound capacity, though its broad format may not suit every van.

A tri-fold aluminum construction combines a 76-inch length with a 50-inch-wide loading surface, then folds for storage in a truck bed, trailer, or cargo area. KOLOTOOL lists a 1,500-pound capacity and a 33.8-pound weight, making it a broad-platform option for one-person carrying and setup.

The 75.98-by-50-inch platform provides a wide surface for loading listed motorcycles, ATVs, lawn mowers, small tractors, and golf carts. Its tri-fold design reduces the storage footprint, while lightweight aluminum and a stated 33.8-pound weight support carrying and setup by one person. A specialized anti-slip surface provides traction, and rubber-coated fingers help protect the tailgate from scratches. The 1,500-pound capacity is the stated limit, so load selection should remain within that rating.

Pros
  • Tri-fold design for storage
  • 50-inch-wide loading surface
  • Rubber-coated fingers help prevent tailgate scratches
  • 1,500-pound capacity
Cons
  • The 33.8-pound weight may be substantial for repeated one-person carrying.

Skip it if you want separate narrow tracks that can be positioned independently; Stalwart's pair uses two individual ramps rated 1,100 pounds each.

This suits buyers seeking a wide folding surface for listed powersports equipment or lawn machines, with storage in a truck or cargo area. Consider the 33.8-pound weight and keep the load within 1,500 pounds.

Full product details
BrandKOLOTOOL
ColorSilver
Dimensions75.98"L x 50"W x 1.97"H
Item Weight35.2 pounds
Load Capacity1500 Pounds
ManufacturerKOLOTOOL
MaterialAluminum
Model Number3075

Listed on Amazon as: Tri-Fold Aluminum Loading Ramp for Pickup Trucks & Trailers, 1500 lbs Capacity Folding Ramp for Motorcycles, ATV, Lawn Mowers, Small Tractors & Golf Carts, 76''L × 50''W, Anti-slip Rust-proof

View on Amazon
ATAUEFHEY Tri-Fold Ramp

#9

9. ATAUEFHEY Tri-Fold Ramp

  • Dimensions: 77"L x 54"W x 1"H
  • Load Capacity: 1.5E+3 lb

Best for: Wide-platform trailer loading.

Why it ranks #9: The 77-by-54-inch aluminum platform has treads and a 1,500-pound capacity, but its wide format is less adaptable than separate van ramps.

A 54-inch-wide, tri-fold aluminum platform gives the ATAUEFHEY ramp a broad loading surface for small four-wheelers, motorcycles, and lawn equipment. Its stated 1,500-pound capacity covers a range of listed machines, while the folding construction helps reduce the ramp's footprint between loading jobs and during transport or storage.

The 77-by-54-inch dimensions create a wide platform, which can help keep equipment centered while moving onto a trailer. Tri-fold construction lets the ramp fold for storage and portability, rather than requiring the full open footprint when it is put away. High-grade aluminum alloy with polishing and welding processes is described as corrosion-resistant and durable, making it relevant for repeated equipment loading. The stated 1,500-pound capacity is intended for small four-wheelers, ATVs, motorcycles, and similar loads.

Pros
  • 54-inch-wide loading platform
  • Tri-fold design for storage and portability
  • Aluminum alloy construction
  • 1,500-pound capacity for listed equipment
Cons
  • The 77-by-54-inch platform is wide to handle and store when unfolded.

Skip it if you need a pair of narrow individual tracks; Stalwart's two 69-inch ramps provide separate 8.86-inch-wide paths.

This suits buyers loading ATVs, motorcycles, or lawn equipment onto a trailer who value a broad platform and folding storage. Check that its 54-inch width and 77-inch length work with your loading and storage space.

Full product details
BrandATAUEFHEY
ColorSilver
Dimensions77"L x 54"W x 1"H
Load Capacity1.5E+3 pounds
ManufacturerATAUEFHEY
Part Numbermotorcycle ramps for pickup trucks
Model NumberAluminum Tri-Fold Ramp with Treads

Listed on Amazon as: Aluminum Tri-Fold Ramp with Treads, Extra Wide Loading Ramp 1500 lbs Capacity, 54"×77" Heavy Duty Trailer Ramps for ATV, UTV, Motorcycle, Lawn Mower

View on Amazon
Loezora 47-Inch Ramps

#10

10. Loezora 47-Inch Ramps

  • Dimensions: 47.2"L x 8.5"W x 2"H
  • Load Capacity: 880 lb
  • Material: Aluminum

Best for: Lightweight shed-to-van hauling.

Why it ranks #10: The lightweight 47.2-inch aluminum pair weighs 11.7 pounds and supports 880 pounds together, but its short length limits cargo-van suitability.

At 5.85 pounds per ramp, Loezora's aluminum pair is easy to carry together for short loading jobs, while its 47.2-inch length suits compact equipment access. The ramps provide 880 pounds of combined capacity on firm ground, making them a portable choice for riding mowers, snow blowers, and ATVs.

Each 47.2-by-8.5-inch ramp is formed from 3 mm 5052 aluminum, and the pair is rated for 880 pounds together when placed side by side on firm ground. That combination supports the listed mower, snow-blower, and ATV use while keeping each ramp light to transport. Hand clips let the ramps fold flat to 2 inches without tools, simplifying storage in a shed or vehicle. Their 47.2-inch length is a shorter approach than longer loading ramps.

Pros
  • 5.85 pounds per ramp
  • Folds flat to 2 inches
  • Tool-free hand clips
  • 880-pound pair capacity on firm ground
Cons
  • The 880-pound combined capacity is lower than the 1,500-pound options.

Skip it if you need a 1,500-pound-rated loading platform; ATAUEFHEY's 77-by-54-inch tri-fold ramp has that stated capacity.

Pick these for lighter equipment and buyers who prioritize carrying ease and compact, tool-free folding. The 880-pound pair rating applies on firm ground, so match the load and approach to those stated conditions.

Full product details
BrandLoezora
ColorGray
Dimensions47.2"L x 8.5"W x 2"H
Item Weight11.7 pounds
Load Capacity880 pounds
ManufacturerLoezora
MaterialAluminum
Model Numberloading ramp-47

Listed on Amazon as: 880 lbs Aluminum Folding Loading Ramps, 2 Pack 47 x 8.5 in

View on Amazon

Avoid the short-ramp angle trap

A ramp can have a useful capacity and still be a poor cargo-van match if it is too short for the loading height. Among these options, the Loezora ramps measure just 47.2 inches, while the LEMNISCATE pair measures 89.9 inches; the longer ramp can create a gentler approach for the same rise, but it also needs more room behind the van. The VEVOR listing recommends a height range of 3.9–31.5 inches, while the Stalwart listing gives a recommended usage height of 34 inches.

Those values are not interchangeable guarantees for every vehicle or load. Measure from the ground to the actual van threshold, then check the manufacturer’s guidance and the available approach space.

A ramp that bottoms out, shifts, or leaves equipment with too-steep an incline can create a loading hazard regardless of its stated capacity.

Check the landing and wheel layout

A ramp’s listed width does not by itself prove it will fit a van’s threshold or match the equipment’s wheels. Separate-ramp sets such as the Arejonner 72.5-Inch Ramps are 8.7 inches wide per ramp, while the LEMNISCATE ramps are 12 inches wide; broad platforms such as the ATAUEFHEY Tri-Fold Ramp measure 54 inches across. Separate tracks let you position ramps to suit two wheels, but their spacing and landing points must align with the equipment and van.

A platform offers a wider continuous surface, yet is bulky and heavier: the VEVOR platform weighs 50.9 pounds, compared with 17.64 pounds per pair for LEMNISCATE in its listing. Verify the threshold contact, ramp spacing, folded storage dimensions, and the vehicle’s permitted loading points before choosing a format.

How to Choose a Cargo Van Ramp

Ramp length and loading height

Look for a ramp long enough to meet your van’s threshold without forcing an overly steep approach. Listed lengths range from 47.2 inches for the Loezora pair to 89.9 inches for LEMNISCATE; most separate-ramp sets fall around 69–72.5 inches, while broad platforms measure about 76–77 inches long. Longer ramps need more ground clearance behind the van, so measure both the threshold height and the space available when parked.

A low cargo floor and limited storage may suit a shorter option if the maker’s height guidance fits. Higher loading points or wheeled equipment that needs a smoother approach favour the longer LEMNISCATE ramps, subject to confirming their fit and rated use.

Capacity and how it is stated

Choose capacity by comparing the ramp rating with the fully loaded equipment, and check whether the figure applies to a pair, each ramp, or a multi-part platform. Several products list 1,500 pounds, but VEVOR specifies 500 pounds per ramp and 1,500 pounds for its set of three, while Stalwart lists 1,100 pounds each and 2,200 pounds combined. Loezora states 880 pounds for its pair; DNA MOTORING specifies 440 pounds each and 880 pounds per pair.

Leave margin for the load and follow the maker’s instructions rather than treating every headline number as directly comparable. Buyers hauling heavier equipment may favour Stalwart’s stated combined capacity, while lighter loads can consider the lower-rated aluminum or HDPE sets.

Ramp format, material, and portability

Match the format and material to your cargo space, handling needs, and loading footprint. Separate folding ramps in this selection are alloy steel, aluminum, or HDPE; wide tri-fold platforms are aluminum and span roughly 50–54 inches. Listed weights vary from 11.7 pounds for the Loezora pair to 50.9 pounds for VEVOR’s platform, while LEMNISCATE lists 17.64 pounds per pair and folds to 45 inches.

Steel options such as the 34.1-pound Arejonner pair offer a different handling trade-off from lighter aluminum models. Choose separate tracks when wheel placement and compact storage are priorities; favour a platform when a continuous wide surface is useful and you can manage its bulk.

Which Cargo Van Ramp Should You Choose?

For a cargo van with enough room behind it, choose the LEMNISCATE Folding Ramps: their 89.9-inch length, 12-inch width, stated 1,500-pound capacity, and 45-inch folded length make them the leading all-around fit in this group. If tie-down hardware matters, the Arejonner 72.5-Inch Ramps include four safety straps and carry the same stated capacity. For a heavier load on separate tracks, consider Stalwart Folding Ramps and verify its 2,200-pound combined rating against your setup.

Choose DNA MOTORING Folding Ramps if a 37-inch folded length and integrated carry handle matter more than capacity. A wide platform buyer can compare VEVOR Tri-Fold Ramps with KOLOTOOL Tri-Fold Ramp, while the Loezora 47-Inch Ramps suit only loading heights and equipment compatible with their shorter length.

Frequently Asked Questions

How do I calculate the ramp length needed for my cargo van’s loading height?

Measure the vertical distance from the ground to the van’s loading edge, then use that height to assess the ramp’s slope and required clearance. A longer ramp generally provides a gentler approach at the same loading height. Check the product’s guidance and confirm the ramp can reach the van securely without obstructing the loading area.

How can I secure folding ramps to a cargo van without damaging its floor or threshold?

Use only the ramp’s intended attachment method, such as included safety straps when provided, and follow its instructions. Position the ramp ends firmly at the loading edge before loading. Avoid drilling into or clamping directly to the van unless the vehicle manufacturer and ramp instructions allow it; inspect contact points for movement or damage.

Should I use two separate ramps or a wide platform for my cargo van and equipment?

Choose two separate ramps when the equipment has appropriately spaced wheels or tracks that can stay centered on each ramp. A wide platform may suit equipment needing continuous support across a broader footprint. In either case, confirm the ramp width, placement, and stated capacity match the equipment and loading method.

How should I check whether a ramp’s capacity is suitable for my load?

Compare the equipment’s loaded weight with the ramp’s stated capacity, and check whether that rating applies to a pair, a single ramp, or a combined set. The Stalwart listing states a 2,200-pound combined capacity; other listed options state different ratings. Follow the manufacturer’s instructions and do not exceed the applicable rating.

What should I check before storing folding ramps inside a cargo van?

Confirm the folded dimensions fit the intended storage space and that the ramps can be secured against shifting during travel. For example, the LEMNISCATE ramps are stated to fold to 45 inches, while the DNA MOTORING ramps are described as folding to 37 inches. Check the product details and your van’s available space before choosing.

Final Words

For a cargo van with enough clearance behind it, the LEMNISCATE 7.5FT ramps are the leading all-around choice here: their 89.9-inch length offers a gentler approach than shorter options, and their stated capacity is 1,500 pounds. Confirm the van-edge fit and load rating first. Consider Arejonner if included tie-down straps matter, Stalwart for separate tracks and its combined rating, or a tri-fold platform when a wider surface better suits your equipment.

Leave a Reply

Your email address will not be published. Required fields are marked *