Best Electric Jack For RV: Compare 10 A-Frame Options

Best Electric Jack For RV

A strong electric RV jack should match your trailer’s tongue-lifting needs, fit its A-frame mount, and include practical backup or weather-protection features. The Best Electric Jack For RV depends on those details more than the largest capacity number alone. This lineup spans listed capacities from 3,500 to 7,500 pounds, with options for buyers who want a remote, a 7-way connector, an emergency crank, or an included cover.

POLESTAR Electric Trailer Jack 7500lb leads for its high stated capacity, RV compatibility, and supplied crank and waterproof cover. Before choosing, check your trailer and mounting arrangement against the jack’s specifications, and do not treat jack capacity as a substitute for confirming the load the jack will actually support.

The comparisons below highlight what each listing verifies.

POLESTAR Electric Trailer Jack 7500lb is the Best Electric Jack For RV in this group because it combines a listed 7,500-pound capacity with stated RV compatibility and an included crank and waterproof cover. It suits buyers who prioritize a high-capacity A-frame tongue jack with a manual backup. If remote operation matters more, KYX Electric Trailer Jack 7500lb includes a remote with a stated 30-meter range; buyers wanting a 7-way connector can consider Kohree Electric Trailer Jack 5000 lbs.

Our Top Picks

POLESTAR Electric Trailer Jack 7500lbBest Overall

POLESTAR Electric Trailer Jack 7500lb

Its 7,500-pound listed capacity, RV compatibility, alloy-steel construction, included crank, and waterproof cover make it a well-equipped high-capacity choice.

View on Amazon
KYX Electric Trailer Jack 7500lbBest Remote Option

KYX Electric Trailer Jack 7500lb

The 7,500-pound-capacity jack includes a wireless remote with a stated maximum 30-meter range, plus a crank handle and cover.

View on Amazon
Kohree Electric Trailer Jack 5000 lbsBest 7-Way Connector

Kohree Electric Trailer Jack 5000 lbs

Its 5,000-pound capacity and RV compatibility suit heavier setups, while the 7-way connector avoids hard wiring or grounding according to the listing.

View on Amazon

Compare Electric RV Jack Options and Key Features

#ProductLoad CapacityMaterialCompatible with Vehicle TypeBuy
17500 lbAlloy SteelRV, Trailer, TruckView on Amazon
2lb 7500Alloy SteelRVView on Amazon
35000 lbAlloy SteelRV, TrailerView on Amazon
43500 lbAlloy SteelTrailerView on Amazon
5
VEVOR Electric Trailer Jack 4000 lbs5. VEVOR Electric Trailer Jack 4000 lbsFour-thousand-pound trailer lifting
4000 lbCarbon SteelTrailerView on Amazon
67500 lbCarbon SteelRVView on Amazon
7
Pafessa Electric Tongue Jack 3500lb7. Pafessa Electric Tongue Jack 3500lbA-frame fit with extended foot
3500 lbAlloy SteelRV, TrailerView on Amazon
8
Kohree Electric Trailer Jack 4000lbs8. Kohree Electric Trailer Jack 4000lbsFast 4,000-pound A-frame lifting
4000 lbHeavy-duty steel with anti-rust coatingCamper, RV, TrailerView on Amazon
95000 lbAlloy SteelRV, Trailer, TruckView on Amazon
10
RVMATE Electric A-Frame Jack10. RVMATE Electric A-Frame JackNighttime trailer hookups
3500-4000 lbAlloy SteelTrailerView on Amazon

Detailed Reviews: Best Electric Jack For RV

POLESTAR Electric Trailer Jack 7500lb

#1 · Best Overall

1. POLESTAR Electric Trailer Jack 7500lb

  • Load Capacity: 7500 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV, Trailer, Truck

Best for: Higher-capacity POLESTAR lifting.

Why it ranks #1: Its 7,500-pound listed capacity, RV compatibility, alloy-steel construction, included crank, and waterproof cover make it a well-equipped high-capacity choice.

A 7,500-pound dynamic capacity gives this POLESTAR jack a higher listed lifting rating than its 5,000-pound sibling, and its 10,000-pound static capacity supports stationary loads. That makes it a candidate for owners who need more capacity for RV, trailer, truck, boat, or off-road vehicle use.

The alloy-steel jack combines a 7,500-pound dynamic rating with a 10,000-pound static lifting capacity, giving buyers clearly stated limits for lifting and stationary support. Its included crank provides a manual option, and the waterproof cover is useful for outdoor exposure. At 23.9 pounds and 32.28 inches long, it requires space in the A-frame installation and storage plan. Listed compatibility spans RVs, trailers, and trucks, along with boats and off-road vehicles in the feature description.

Pros
  • 7,500-pound dynamic load capacity
  • 10,000-pound static lifting capacity
  • Alloy-steel construction
  • Includes crank and waterproof cover
Cons
  • At 23.9 pounds, it weighs more than the POLESTAR 5000-pound model's listed 21.7 pounds.

Skip it if you need the lighter listed POLESTAR option; its 5,000-pound model weighs 21.7 pounds rather than this jack's 23.9.

This POLESTAR is for owners who need its 7,500-pound dynamic and 10,000-pound static ratings across RV, trailer, or other listed vehicle uses. Consider the 23.9-pound weight and available A-frame space.

Full product details
BrandPOLESTAR
ColorBlack
Compatible with Vehicle TypeRV, Trailer, Truck
Included ComponentsCrank, Electric Trailer Jack, Waterproof Cover
Item Dimensions7.28 x 4.72 x 32.28 inches
Item Weight23.9 pounds
Load Capacity7500 Pounds
ManufacturerPOLESTAR
Part Number10201175
Manufacturer Warranty Description1 Year Warranty
MaterialAlloy Steel
Model NumberElectric Trailer Jack
Style NameElectric Trailer Jack

Listed on Amazon as: POLESTAR Electric Trailer Jack, 7500lbs Electric Power A-Frame Tongue Jack

View on Amazon
KYX Electric Trailer Jack 7500lb

#2 · Best Remote Option

2. KYX Electric Trailer Jack 7500lb

  • Load Capacity: lb 7500
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV

Best for: Remote-operated RV lifting.

Why it ranks #2: The 7,500-pound-capacity jack includes a wireless remote with a stated maximum 30-meter range, plus a crank handle and cover.

A wireless remote with a listed range of up to 30 meters lets you operate this KYX jack from the driver's seat or beside the RV, without bending over to reach the controls. Its 7,500-pound rating and included hand crank give buyers both powered lifting and a manual option.

Remote control changes the operating position: the listed 30-meter range can help when uneven ground, rain, or nighttime conditions make reaching the jack inconvenient. The motor-driven height adjustment supplies powered raising and lowering, while the included hand crank offers a manual alternative. With a 7,500-pound capacity, alloy-steel construction, and RV compatibility, this model suits owners prioritizing remote operation; the included cover also helps protect the jack when stored or exposed outdoors.

Pros
  • Wireless remote control
  • Remote range up to 30 meters
  • 7,500-pound load capacity
  • Includes hand crank and cover
Cons
  • Its listed vehicle compatibility is limited to RVs, rather than multiple vehicle types.

Skip it if you need a jack explicitly listed for trailers, trucks, or boats; the POLESTAR 5000-pound model lists those vehicle types.

Choose this KYX for an RV owner who values remote operation from a distance and wants a hand crank as backup. Its listed compatibility is RV-only, so confirm that this matches your trailer application.

Full product details
BrandKYX
ColorBlack
Compatible with Vehicle TypeRV
Included Componentscover,hand crank,jack
Item Dimensions32.28 x 9.45 x 6.69 inches
Load Capacitylb 7500
ManufacturerKYX
Part Number9134FLJ0042US
Manufacturer Warranty Description1 Year Manufacturer
MaterialAlloy Steel
Model Number8650DJS010LUS
Style Name7500lbs

Listed on Amazon as: KYX Electric Trailer Jack 7500lb with Remote, with Crank Handle & Cover

View on Amazon
Kohree Electric Trailer Jack 5000 lbs

#3 · Best 7-Way Connector

3. Kohree Electric Trailer Jack 5000 lbs

  • Load Capacity: 5000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV, Trailer

Best for: 7-way connector RV owners.

Why it ranks #3: Its 5,000-pound capacity and RV compatibility suit heavier setups, while the 7-way connector avoids hard wiring or grounding according to the listing.

A 7-way connector lets this Kohree jack plug into a vehicle's ready-wired connection without hard wiring or grounding, simplifying the electrical hookup for compatible A-frame trailers. Its 5,000-pound dynamic capacity and 7,500-pound static lifting capacity support buyers seeking more capacity than a 4,000-pound model.

The plug-in 7-way connection avoids hard wiring and grounding when the towing vehicle has a ready-wired connector, making compatibility the key installation check. Button controls raise and lower the jack, and its 5,000-pound dynamic and 7,500-pound static ratings state its lifting limits. The package includes a manual crank, cover, and three mounting bolts. The listing notes that after long periods unused, the inner motor may need reactivation and a sizeable instantaneous current.

Pros
  • 5,000-pound dynamic capacity
  • 7,500-pound static lifting capacity
  • Connects through a ready-wired 7-way connector
  • Includes manual crank, cover, and mounting bolts
Cons
  • Its plug-in setup requires a ready-wired 7-way connector on the vehicle.

Skip it if you lack a ready-wired 7-way connector; the Kohree HY1711-KO-US-FBA-2 is listed with wiring instead.

This Kohree fits RV and trailer owners with a ready-wired 7-way connector who want 5,000-pound dynamic capacity and push-button lifting. Check connector availability, and note the listed motor reactivation requirement after long storage.

Full product details
BrandKohree
ColorBlack
Compatible with Vehicle TypeRV, Trailer
Included Components1x Electric Trailer Jack, 1x Jack Cover, 1x Manual Crank Handle, 3x Bolt Mounting
Item Dimensions31.2 x 8.6 x 6.6 inches
Item Weight21 pounds
Load Capacity5000 Pounds
ManufacturerKohree
Part NumberKR1216-KO-US-FBA
Manufacturer Warranty DescriptionKohree Service
MaterialAlloy Steel
Model NumberKR1216

Listed on Amazon as: Kohree Electric Trailer Jack 5000 lbs with 7-Way Connector, Heavy Duty

View on Amazon
Lippert Electric Trailer Tongue Jack

#4 · Best LED Details

4. Lippert Electric Trailer Tongue Jack

  • Load Capacity: 3500 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer

Best for: Compact 3,500-pound RV setup.

Why it ranks #4: This RV-oriented 3,500-pound jack lists integrated LED lights, quiet helical-cut gears, a hand crank, and mounting hardware components.

Four integrated LED lights make the Lippert Power Tongue Jack useful when connecting or adjusting a trailer in low light, while its 3,500-pound lift capacity serves lighter tongue-jacking needs. Quiet, efficient helical-cut gears support powered lifting without relying on a hand crank for routine operation.

The helical-cut gears are described as quiet and efficient, helping make powered raising and lowering less cumbersome during campsite setup. Four integrated LED lights illuminate the work area for nighttime operation. Its 3,500-pound capacity is a fit consideration for buyers matching jack capacity to their trailer, and the included clevis pin, foot pad, cotter pin, and hand crank provide key installation and manual-operation pieces in the package.

Pros
  • 3,500-pound lift capacity
  • Four integrated LED lights
  • Quiet, efficient helical-cut gears
  • Includes foot pad, pins, and hand crank
Cons
  • Its 3,500-pound capacity is below the 4,000-pound rating of the VEVOR EJ3550B.

Skip it if you need a 4,000-pound rating; the VEVOR EJ3550B lists that capacity for trailer lifting.

This Lippert fits trailer owners seeking a 3,500-pound electric tongue jack with lighting for after-dark hookups. Match its capacity to your trailer, and account for the supplied clevis pin and foot pad during installation.

Full product details
BrandLippert Components
ColorBlack
Compatible with Vehicle TypeTrailer
Included Components2-1/2" Clevis Pin, 5-3/8" Diameter Foot Pad, Hairpin Cotter Pin, Hand Crank, Jack Body
Item Dimensions32.75 x 12.5 x 7.25 inches
Item Weight28.6 pounds
Load Capacity3500 pounds
ManufacturerLippert
Part Number285318
Manufacturer Warranty Description1 Year
MaterialAlloy Steel
Model Number285318
Style NameTongue Jack
Additional InformationImportant Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Listed on Amazon as: Lippert 3,500 lb Electric Trailer Tongue Jack, RV Power Jack, Black 285318

View on Amazon
VEVOR Electric Trailer Jack 4000 lbs

#5

5. VEVOR Electric Trailer Jack 4000 lbs

  • Load Capacity: 4000 lb
  • Material: Carbon Steel
  • Compatible with Vehicle Type: Trailer

Best for: Four-thousand-pound trailer lifting.

Why it ranks #5: The 4,000-pound jack has a waterproof cover, crank handle, carbon-steel construction, and a stated 9.84-to-33.85-inch height range.

A 4,000-pound capacity and a listed 9.84-to-33.85-inch height range give the VEVOR electric jack a defined lifting envelope for trailer setups. Its carbon-steel construction has a protective coating, and the included waterproof sunshade cover adds a practical storage and outdoor-use accessory.

The 4,000-pound load rating supports trailer lifting within its stated capacity, while the 9.84-to-33.85-inch height range helps buyers assess whether its reach suits their setup. Carbon steel with a protective coating is specified for outdoor conditions and splashes. The package includes a crank handle and waterproof sunshade cover, giving owners both a manual operating option and a cover without needing to source those listed accessories separately.

Pros
  • 4,000-pound load capacity
  • 9.84-to-33.85-inch height range
  • Protective-coated carbon-steel construction
  • Includes crank handle and waterproof sunshade cover
Cons
  • Its listed vehicle compatibility is trailer-only, not RV-specific.

Skip it if you need RV compatibility explicitly listed; the Kohree HY1711-KO-US-FBA-2 lists campers, RVs, and trailers.

The VEVOR suits trailer owners needing a 4,000-pound jack with a crank and waterproof cover included. Its listed compatibility is for trailers, so RV buyers should consider whether that stated fit matches their application.

Full product details
BrandVEVOR
ColorBlack
Compatible with Vehicle TypeTrailer
Included Components1 x Trailer Jack 1 x Crank Handle 1 x Waterproof Sunshade Cover
Item Dimensions33.85 inches
Item Weight9.8 kg
Load Capacity4000 pounds
ManufacturerVEVOR
Part Number4000 lbs Electric Trailer Jack
Manufacturer Warranty Description2 Year Manufacturer
MaterialCarbon Steel
Model NumberEJ3550B
Style Name4000LBS

Listed on Amazon as: VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84"-33.85" Electric Tongue Jack with Waterproof Cover for Lifting RV Trailer, Horse Trailer, Utility Trailer, Yacht Trailer

View on Amazon
SEALIGHT Electric Trailer Jack 7500lbs

#6 · Highest Capacity

6. SEALIGHT Electric Trailer Jack 7500lbs

  • Load Capacity: 7500 lb
  • Material: Carbon Steel
  • Compatible with Vehicle Type: RV

Best for: High-capacity nighttime lifting.

Why it ranks #6: Its listed 7,500-pound capacity is among the highest here, and the description specifies LED lighting and circuit-breaker power-off protection.

A 7,500-pound capacity paired with LED lighting makes the SEALIGHT a high-capacity option for owners who may need to operate an A-frame RV jack after dark. Its 12V DC motor powers quick lifting, while a built-in circuit breaker cuts power when operation is improper.

The 12V DC motor and 7,500-pound rating provide the core lifting capability for RV use, while the quick-lift feature can make raising and lowering more efficient during setup. LED lights improve visibility around the jack during nighttime operation. The built-in circuit breaker adds power-off protection if operated improperly. Carbon-steel construction and the included housing are listed; installation details beyond its A-frame and RV description are not specified.

Pros
  • 7,500-pound load capacity
  • 12V DC motor
  • LED lights for nighttime lifting
  • Built-in circuit-breaker power-off protection
Cons
  • The listing includes housing but does not list a crank handle or mounting hardware.

Skip it if you want a listed hand crank and mounting hardware; the Pafessa 3,500-pound jack includes mounting hardware and an emergency crank socket.

The SEALIGHT suits RV owners seeking a 7,500-pound jack with lights for nighttime work and circuit-breaker protection. Its listing does not specify a crank or mounting hardware, so those details matter when planning installation.

Full product details
BrandSEALIGHT
Colorblack
Compatible with Vehicle TypeRV
Included ComponentsComes with housing
Load Capacity7500 pounds
ManufacturerSEALIGHT
Part Number1642FLJ002XUS
Manufacturer Warranty Description1 Year Manufacturer
MaterialCarbon Steel
Model Numberjack
Style Name7500lbs

Listed on Amazon as: SEALIGHT Electric Trailer Jack 7500lbs, Waterproof for A-Frame&RV Trailer

View on Amazon
Pafessa Electric Tongue Jack 3500lb

#7

7. Pafessa Electric Tongue Jack 3500lb

  • Load Capacity: 3500 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV, Trailer

Best for: A-frame fit with extended foot.

Why it ranks #7: The 3,500-pound jack offers 18 inches of travel plus a footpad adding 4.5 inches, with a cover and mounting hardware included.

An 18-inch travel range plus a footpad that adds 4.5 inches of extension gives the Pafessa jack additional reach for RV and A-frame trailer setups. Its 3,500-pound capacity, 6-inch adjustable footpad, and 2.25-inch mounting-hole fit make installation dimensions and available lift range central buying considerations.

The 18-inch travel and 4.5-inch footpad extension provide two ways to reach the ground, which can help accommodate different trailer heights. The 6-inch footpad spreads the contact area, while the jack is specified for 2.25-inch mounting holes on most A-frame trailers and RVs. Its 7-foot power cord uses positive and negative wires for direct grounding; terminals are not included. Mounting hardware and a weather-resistant cover are supplied.

Pros
  • 3,500-pound lift capacity
  • 18-inch travel with 4.5-inch footpad extension
  • 6-inch adjustable footpad
  • Includes mounting hardware and weather-resistant cover
Cons
  • Wire terminals are not included with the 7-foot power cord.

Skip it if you need a higher listed capacity; the SEALIGHT 7500-pound jack has a 7,500-pound rating for RV use.

The Pafessa is for A-frame RV and trailer owners who want added footpad extension and supplied mounting hardware. Check the 2.25-inch mounting-hole fit and plan to provide wire terminals for its power cord.

Full product details
BrandPafessa
ColorBlack
Compatible with Vehicle TypeRV, Trailer
Included Components3,500LB Electric Tongue Jack, Emergency Crank Socket (driver handle not included), Installation/Operating Instructions, Mounting Hardware (nuts, bolts, washers), Weather-Resistant Cover
Item Dimensions30.7 x 8.68 x 7.67 inches
Item Weight8 kg
Load Capacity3500 pounds
ManufacturerPafessa
Part NumberC24-3912
Manufacturer Warranty DescriptionIf you have any questions, please feel free to contact us and we will do our best to answer your questions.
MaterialAlloy Steel
Model NumberC24-3212 (Heavy Duty)
Style NameElectric

Listed on Amazon as: 12V Electric Tongue Jack 3500lb A-Frame Heavy Duty Trailer Jack 18” Travel Add 4.5” with The Drop Foot & LED Light for Travel Trailer Camper,Protective Cover Included

View on Amazon
Kohree Electric Trailer Jack 4000lbs

#8

8. Kohree Electric Trailer Jack 4000lbs

  • Load Capacity: 4000 lb
  • Material: Heavy-duty steel with anti-rust coating
  • Compatible with Vehicle Type: Camper, RV, Trailer

Best for: Fast 4,000-pound A-frame lifting.

Why it ranks #8: This RV-compatible 4,000-pound option includes a cover, manual crank, and mounting bolts; its listing gives a lift-time comparison for eight inches.

Kohree specifies an eight-inch lift in 47 seconds, giving its 4,000-pound A-frame jack a concrete speed measure for owners who want quicker powered setup. Its 12V DC motor operates by button, and the listing also provides a manual crank for backup operation.

The manufacturer states an eight-inch lift takes 47 seconds, compared with 84 seconds for other products, so buyers can gauge its claimed operating pace. A 12V DC motor powers the button-operated raising and lowering, and the 4,000-pound dynamic capacity is paired with a 6,000-pound static rating. Heavy-duty steel with an anti-rust coating supports outdoor use, while the included cover, crank handle, and mounting bolts aid installation and storage.

Pros
  • 4,000-pound dynamic capacity
  • 6,000-pound static lifting capacity
  • Stated eight-inch lift time of 47 seconds
  • Includes cover, manual crank, and mounting bolts
Cons
  • Its 4,000-pound dynamic capacity is below the 5,000-pound rating of the Kohree KR1216.

Skip it if you need a 5,000-pound dynamic rating; the Kohree KR1216 lists that higher capacity and a 7-way connector.

This Kohree suits A-frame RV, camper, and trailer owners prioritizing a stated lift time and manual crank backup. Its 4,000-pound dynamic rating is the key boundary to check against your trailer.

Full product details
BrandKohree
ColorBlack
Compatible with Vehicle TypeCamper, RV, Trailer
Included Components1x Electric Trailer Jack, 1x Jack Cover, 1x Manual Crank Handle, 3x Bolt Mounting
Item Dimensions7.09 x 5.71 x 24.41 inches
Item Weight20.5 pounds
Load Capacity4000 pounds
ManufacturerKohree
Part NumberHY1711-KO1
Manufacturer Warranty Description1 Year Manufacturer
MaterialHeavy-duty steel with anti-rust coating
Model NumberHY1711-KO-US-FBA-2
Style NameTongue Jack

Listed on Amazon as: Kohree Electric Trailer Jack 4000lbs with Wiring, Heavy Duty, A-Frame

View on Amazon
POLESTAR Electric Trailer Jack 5000lbs

#9

9. POLESTAR Electric Trailer Jack 5000lbs

  • Load Capacity: 5000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: RV, Trailer, Truck

Best for: Heavy-duty A-frame trailers.

Why it ranks #9: The alloy-steel jack lists RV compatibility and 5,000-pound capacity, with a crank and waterproof cover included for manual backup and protection.

A 5,000-pound dynamic rating gives the POLESTAR electric jack the capacity to handle substantial trailer tongue-lifting duties, while its 7,500-pound static lifting capacity adds headroom for stationary support. It is specified for RVs, trailers, trucks, boats, and off-road vehicles, making it a versatile option for owners managing more than one type of rig.

The alloy-steel construction pairs with the stated 5,000-pound dynamic and 7,500-pound static capacities to suit demanding trailer and RV tasks. Its included crank provides a manual option, while the waterproof cover is useful when the jack is exposed to outdoor conditions. At 21.7 pounds and 32.28 inches long, it has a substantial footprint to account for when planning A-frame installation and storage. The listed vehicle compatibility also includes trucks, boats, and off-road vehicles.

Pros
  • 5,000-pound dynamic load capacity
  • 7,500-pound static lifting capacity
  • Alloy-steel construction
  • Includes crank and waterproof cover
Cons
  • Its 5,000-pound dynamic capacity is lower than the 7,500-pound rating of the POLESTAR B0G4CSMWCG.

Skip it if you need a 7,500-pound dynamic rating; the POLESTAR 7500-pound A-frame jack provides that higher listed capacity.

For RV and trailer owners who want electric A-frame lifting with a 5,000-pound dynamic rating, this POLESTAR covers several vehicle types. Check that its capacity and substantial 32.28-inch length suit your installation.

Full product details
BrandPOLESTAR
ColorBlack
Compatible with Vehicle TypeRV, Trailer, Truck
Included ComponentsCrank, Electric Trailer Jack, Waterproof Cover
Item Dimensions7.28 x 9.84 x 32.28 inches
Item Weight21.7 pounds
Load Capacity5000 Pound
ManufacturerPOLESTAR
Part Number10201091
Manufacturer Warranty Description1 Year Warranty
MaterialAlloy Steel
Model Number10201091
Style NameElectric Trailer Jack

Listed on Amazon as: POLESTAR Electric Trailer Jack, 5000lbs Electric Power A-Frame Tongue Jack

View on Amazon
RVMATE Electric A-Frame Jack

#10

10. RVMATE Electric A-Frame Jack

  • Load Capacity: 3500-4000 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Trailer

Best for: Nighttime trailer hookups.

Why it ranks #10: Its 3,500-to-4,000-pound listed capacity and A-frame design suit some trailers, but the provided specifications identify fewer included setup details.

An integrated LED light makes the RVMATE electric A-frame jack easier to operate at night, while its button-controlled lifting replaces routine manual cranking. The listing gives a 3,500-to-4,000-pound capacity range and a 32-3/5-inch maximum extended height for buyers comparing lift needs and reach.

Powered raising and lowering can simplify connecting or disconnecting a trailer and adjusting its parked height. Its maximum extended height is 32-3/5 inches, and it retracts to 9 inches, giving buyers useful measurements for checking clearance and range. The footplate bracket has four height-adjustment holes secured with a locking pin, while star washers help create metal-to-metal grounding through the mounting-plate paint. The LED light supports operation after dark.

Pros
  • 3,500-to-4,000-pound capacity range
  • Button-controlled electric raising and lowering
  • LED light for nighttime operation
  • Four footplate height-adjustment holes
Cons
  • Its stated capacity is a 3,500-to-4,000-pound range, not a single higher rating.

Skip it if you need a 5,000-pound rating; the POLESTAR 5000-pound electric jack lists that dynamic load capacity.

The RVMATE is for trailer owners who want button-operated lifting, night lighting, and adjustable footplate height. Check its stated capacity range and extended height against your trailer's lifting needs and clearance.

Full product details
BrandRVMATE
ColorBlack
Compatible with Vehicle TypeTrailer
Included Componentsplastic
Item Weight10.52 kg
Load Capacity3500-4000 pounds
ManufacturerRVMATE
Part NumberRMETJ
Manufacturer Warranty Description1 year
MaterialAlloy Steel
Model NumberRMETJ
Style NameTongue Jack

Listed on Amazon as: Electric A-Frame Trailer Jack up to 3500-4000lbs

View on Amazon

Avoiding an A-frame fit and grounding mismatch

A jack can have ample capacity and still be a poor fit if its mounting plate, hole pattern, or electrical grounding arrangement does not match the trailer. The Pafessa listing says it fits 2.25-inch mounting holes on most A-frame trailers and RVs, but that wording is not a guarantee for every plate; compare your actual mount before ordering. RVMATE notes that its star washers are intended to pierce paint for metal-to-metal grounding, while Kohree’s 5,000-pound model instead plugs into a ready-wired 7-way connector and says it requires no hard wiring or grounding.

Those are different installation approaches, not interchangeable features. Verify the trailer’s connector or ground path, mounting-hole spacing, and clearance against the jack instructions.

A capacity match alone cannot resolve those compatibility questions, and the supplied listings do not establish universal fit across all RVs.

Plan for power loss before you need the jack

An electric jack’s manual backup matters because the motor may not be usable when power is unavailable or the electrical setup is not functioning. Several products include a crank or hand crank, including POLESTAR Electric Trailer Jack 7500lb, KYX Electric Trailer Jack 7500lb, and Kohree Electric Trailer Jack 4000lbs. Pafessa specifies an emergency crank socket but says the driver handle is not included, so check what tool you would need to operate it.

The Kohree 5,000-pound listing also warns that after first use or a long period unused, the inner motor may need reactivation and that it needs a sizeable instantaneous current. These details make it sensible to confirm the backup method and the power connection before travel.

Do not assume a jack’s motor will operate simply because its capacity and mounting appear suitable.

How to Choose an Electric RV Tongue Jack

Capacity matched to the tongue load

Choose capacity based on the load the jack must lift, not the RV’s total weight alone. The listed capacities range from 3,500 pounds for Lippert Electric Trailer Tongue Jack and Pafessa Electric Tongue Jack 3500lb to 7,500 pounds for POLESTAR Electric Trailer Jack 7500lb, KYX Electric Trailer Jack 7500lb, and SEALIGHT Electric Trailer Jack 7500lbs. Other options list 4,000 or 5,000 pounds.

Some descriptions also state a separate static figure: POLESTAR Electric Trailer Jack 7500lb lists 10,000 pounds static lifting power, while its dynamic capacity is 7,500 pounds. Check your trailer’s requirements and the manufacturer’s capacity guidance.

Buyers with heavier tongue loads may favor the higher-capacity end; lighter setups may have suitable choices lower in the range.

Mounting and electrical compatibility

Look for a mounting and power arrangement that matches the trailer you own. Pafessa Electric Tongue Jack 3500lb states that it fits 2.25-inch mounting holes on most A-frame trailers and RVs, while Kohree Electric Trailer Jack 5000 lbs is designed to plug into a ready-wired 7-way connector without hard wiring or grounding. RVMATE Electric A-Frame Jack describes star washers intended to create metal-to-metal grounding through paint.

These details vary and should be checked against the actual trailer, rather than inferred from the product’s RV label. If you already have a suitable 7-way connector, the Kohree setup may be convenient; if your trailer uses a conventional wired installation, verify the wiring and grounding instructions for the chosen jack.

Confirm the hole pattern and clearance before purchase.

Travel, height, and included backup

Compare lift travel and included backup parts with the way you park and hitch. Pafessa Electric Tongue Jack 3500lb specifies 18 inches of travel and a footpad that adds 4.5 inches; RVMATE Electric A-Frame Jack lists a maximum extended height of 32-3/5 inches and a fully retracted height of 9 inches. POLESTAR Electric Trailer Jack 7500lb and KYX Electric Trailer Jack 7500lb include a crank, while Pafessa includes an emergency crank socket but not the driver handle.

Covers are also listed with several models, including VEVOR Electric Trailer Jack 4000 lbs. Buyers who need extra extension should compare stated travel and footpad details; those prioritizing outage readiness should check that the manual-operating parts they need are actually included.

Which electric jack should you choose for your RV?

For a high-capacity RV-compatible choice with a crank and waterproof cover, choose POLESTAR Electric Trailer Jack 7500lb, the overall leader. Choose KYX Electric Trailer Jack 7500lb if its remote and stated 30-meter range are your priority. If your trailer has a ready-wired 7-way connector and you want a 5,000-pound listed capacity, consider Kohree Electric Trailer Jack 5000 lbs.

Buyers seeking a 3,500-pound option with stated lighting and helical-cut gears can look at Lippert Electric Trailer Tongue Jack. For additional specified extension, Pafessa Electric Tongue Jack 3500lb lists 18 inches of travel plus a 4.5-inch footpad extension.

Before deciding, confirm your tongue-load requirement, A-frame mounting fit, electrical setup, and emergency manual-operation needs.

Frequently Asked Questions

How do I determine the tongue load my RV jack needs to lift?

Check your trailer or RV manufacturer’s information for the required tongue-jack capacity, and account for the trailer in its actual loaded condition. Do not use the trailer’s total weight as a substitute for tongue load. If the rating is unclear, ask the manufacturer or a qualified trailer professional before choosing a jack.

How can I confirm an electric jack will fit my trailer’s A-frame mounting plate?

Compare the jack’s mounting arrangement with your trailer’s A-frame plate, including the bolt-hole pattern and available clearance. Check the product information for fit details and confirm that the jack can be mounted without contacting nearby trailer parts. If measurements or compatibility are unclear, verify them with the jack or trailer manufacturer before installation.

What should I do if an electric tongue jack loses power while the trailer is hitched?

Keep the trailer hitched, secure it against movement, and avoid relying on an unpowered jack to support or move it. Check the power connection and follow the manufacturer’s troubleshooting instructions. Use a manual crank only if your jack is designed for one and you have the correct procedure; seek qualified help if it remains inoperable.

What electrical details should I check before choosing an electric tongue jack?

Confirm the jack’s required electrical connection and compare it with your trailer’s available wiring and power supply. Check whether the product calls for a particular connector, such as a 7-way connection, and verify that your setup supports it. Follow the manufacturer’s installation instructions, and resolve any uncertainty before connecting or operating the jack.

Which backup features are useful if the jack cannot be powered?

A compatible manual crank can provide an alternative way to operate a jack when electrical power is unavailable; the KYX and POLESTAR 7500-pound listings specify a crank. Check the instructions for how to use it and whether it is included. A cover or lighting may offer other conveniences, but neither replaces a suitable manual backup.

Final Words

Start by confirming your loaded trailer’s tongue-load requirement, A-frame mounting fit, electrical connection, and need for manual operation. For a high-capacity RV-compatible option with a crank and waterproof cover, the POLESTAR 7500-pound jack is the overall choice. Choose KYX if its remote and stated 30-meter range matter most, or Kohree if you need a 7-way connector.

Consider Lippert or Pafessa for the stated 3,500-pound options and features.

Leave a Reply

Your email address will not be published. Required fields are marked *