A strong trailer landing gear choice matches the trailer’s mounting system and load needs, and the Mytee Products LG28E pair is the clearest fit for buyers seeking complete, high-capacity trailer support. This lineup spans a commercial two-leg set, an electric fifth-wheel system, a weld-on jack, replacement legs, and a hydraulic leveling jack. Those products are not interchangeable: several are parts for specific RV systems rather than complete landing gear assemblies.
Compare capacity figures carefully, since the data distinguishes lifting capacity from static load capacity in some listings, and check dimensions, leg position, and fitment before ordering. The right option depends on whether you need a full assembly, powered operation, a permanent weld-on jack, or a compatible replacement component.
Mytee Products LG28E is the strongest overall choice for buyers who need a complete, heavy-duty trailer landing gear pair. It is listed with 62,000 pounds of lift capacity and 160,000 pounds of static load capacity, plus a two-speed gearbox, crank handle, slave leg, braces, and connecting shaft. Those specifications suit a buyer replacing or equipping a commercial trailer assembly.
For an RV fifth wheel, choose a compatible RV-specific option instead; the Mytee set is not presented as a universal fit for every trailer.
Our Top Picks
Best OverallThe two-leg set lists 62,000 pounds of lift and 160,000 pounds static load capacity, with a two-speed gearbox and connecting shaft included.
View on Amazon
Complete Semi SetThis 17-inch two-leg assembly includes a shaft, crank handle, hanger, and brace ears, with 55,000-pound lift and 170,000-pound static ratings.
View on Amazon
Best Electric OptionUltra-Fab Electric Landing Gear
Its two independent 12-volt motors and waterproof switch raise or lower a fifth wheel, with 12,000 pounds total lift capacity.
View on Amazon- Best Weld-On Jack BaVekHak Weld-On Jack
Compare trailer landing gear options
| # | Product | Weight | Compatible with Vehicle Type | Dimensions | Buy |
|---|---|---|---|---|---|
| 1 | 1. Mytee Products LG28EBest Overall | 526 lb | Trailer | — | View on Amazon |
| 2 | 2. PART STOP LG4001 SetComplete Semi Set | 205 lb | — | 50 x 24 x 18 in | View on Amazon |
| 3 | 3. Ultra-Fab Electric Landing GearBest Electric Option | 50 lb | — | 0.4 x 11 x 6 in | View on Amazon |
| 4 | 4. BaVekHak Weld-On JackBest Weld-On Jack | 25 lb | ATV, Car, RV, Trailer, UTV | — | View on Amazon |
| 5 | 5. Lippert Hydraulic Left JackLeft-side hydraulic Level Up jack | 24 lb | — | 32.9 x 17.7 x 15.7 in | View on Amazon |
| 6 | 6. Lippert 179013 Drop LegLippert power-gear lead-leg replacement | 24.9 lb | — | 32 x 6.25 x 2.38 in | View on Amazon |
| 7 | 7. Stromberg Carlson LG-177202Long-stroke fifth-wheel lead leg | 27 lb | — | 42 x 7 x 5 in | View on Amazon |
| 8 | 8. FHRHRY 179013 LegCompatible fifth-wheel replacement leg | — | RV | — | View on Amazon |
| 9 | 9. HY-SPEED 179013 LegLead-leg replacement with housing | 12.07 kg | RV | — | View on Amazon |
| 10 | 10. FEXON 179014 Follow LegOEM-style fifth-wheel follow leg | 12.11 kg | Trailer | — | View on Amazon |
Detailed Reviews: Best Landing Gear For Trailers

#1 · Best Overall
1. Mytee Products LG28E
- Weight: 526 lb
- Compatible with Vehicle Type: Trailer
Best for: High-capacity paired trailer landing gear.
Why it ranks #1: The two-leg set lists 62,000 pounds of lift and 160,000 pounds static load capacity, with a two-speed gearbox and connecting shaft included.
A two-speed external gearbox and a listed 62,000-pound lift capacity make this Mytee Products pair a fit for substantial trailer support work. The two-jack set also includes a slave leg, braces, a 59-3/4-inch connecting shaft, and crank handle, supplying key paired-system components together for outside mounting.
The precision-forged two-speed gearbox gives operators two gearing options through the included crank handle, while the 62,000-pound lift and 160,000-pound static ratings define its heavy-duty capacity. Because the order includes a slave leg, pair of braces, and 59-3/4-inch connecting shaft, it supplies the listed pieces for connecting the pair rather than leaving those components as separate requirements. Outside mounting and high-viscosity, high-lubricity grease are specified details to account for in installation and upkeep.
- Two-speed external gearbox
- Rated for 62,000 pounds lift and 160,000 pounds static load
- Pair includes slave leg, braces, shaft, and crank handle
- Outside mounting with high-viscosity, high-lubricity grease specified
- The 526-pound listed weight makes handling and installation a substantial task.
Skip it if you need a lightweight single replacement leg; the FHRHRY 179013 is listed as one RV landing gear leg.
Select this Mytee Products pair for trailer owners needing high stated lift and static capacities plus the connecting hardware for an outside-mounted setup. Its 526-pound listed weight makes handling logistics important before installation.
Full product details
| Brand | Mytee Products |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Item Weight | 526 pounds |
| Load Capacity | 62000 pounds |
| Manufacturer | Mytee Products |
| Part Number | LG28Ex2-PK |
| Model Number | LG28E |
| Style Name | gear-driven |
Listed on Amazon as: Mytee Products 2 Pack Landing Gear Trailer Jack Set 62,000# Lift 160,000# Static Load 2 Speed External Gear Box
View on Amazon
#2 · Complete Semi Set
2. PART STOP LG4001 Set
- Weight: 205 lb
- Dimensions: 50 x 24 x 18 in
Best for: Complete semi-trailer gear set.
Why it ranks #2: This 17-inch two-leg assembly includes a shaft, crank handle, hanger, and brace ears, with 55,000-pound lift and 170,000-pound static ratings.
This two-leg set arrives with a cross drive shaft, crank handle, crank hanger, and two brace ears, making it a broad replacement package for semi-trailer landing gear. Its stated 55,000-pound lifting capacity and 170,000-pound static capacity suit buyers evaluating a complete paired set rather than an individual leg.
Supplying both landing legs and the cross drive shaft gives the set the core paired components for operating the gear together; the crank handle and hanger provide the listed manual operating and storage pieces. Two brace ears are included for the set’s bracing arrangement. The 55,000-pound lift and 170,000-pound static ratings help define its support capacity, while the extensive cross-reference list gives buyers specific replacement numbers to compare with existing equipment before ordering.
- Complete two-leg landing gear set
- Includes cross drive shaft, crank handle, and crank hanger
- Includes two brace ears
- Rated for 55,000 pounds lift and 170,000 pounds static load
- The listed 205-pound weight makes this set demanding to handle during installation.
Skip it if you only need one fifth-wheel replacement leg; the Stromberg Carlson LG-177202 is a single lead leg with a pin.
This PART STOP set fits buyers replacing semi-trailer landing gear who need both legs and the listed drive and bracing components. Its substantial listed weight and replacement cross-references make handling and part identification key considerations.
Full product details
| Brand | PART STOP THE RIGHT PARTS, RIGHT ON TIME |
|---|---|
| Item Weight | 205 pounds |
| Item model number | LG4001-700000078 |
| Manufacturer | PartStop LLC |
| Part Number | PS-TRBF.01.UN.001 |
| Model | LG4001-700000078 |
| Dimensions | 50 x 24 x 18 inches |
Listed on Amazon as: LG4001-700000078 Trailer Landing Gear Flat Foot Set (RH and LH) Semi Truck
View on Amazon
#3 · Best Electric Option
3. Ultra-Fab Electric Landing Gear
- Weight: 50 lb
- Dimensions: 0.4 x 11 x 6 in
Best for: Push-button fifth-wheel leveling.
Why it ranks #3: Its two independent 12-volt motors and waterproof switch raise or lower a fifth wheel, with 12,000 pounds total lift capacity.
Two independent 12-volt motors let this Ultra-Fab landing gear raise and lower a fifth wheel at the push of a waterproof switch, replacing hand-cranking with powered operation. Its 12,000-pound total lifting capacity, stated as 6,000 pounds per leg, and independently positionable footpads address both support and placement on uneven surfaces.
The waterproof switch controls powered raising and lowering, so setup does not rely on turning a crank by hand. Independent motors allow each side to operate separately, while independent footpad positioning helps place both pads firmly on uneven ground. The listed 12-volt supply and 12,000-pound total capacity are important system constraints to consider when replacing gear; the capacity is specified as 6,000 pounds per leg, not 12,000 pounds per individual leg.
- Push-button raising and lowering via a waterproof switch
- Two independent 12-volt motors
- 12,000-pound total capacity, 6,000 pounds per leg
- Footpads can be positioned independently on uneven surfaces
- Powered operation depends on a 12-volt electrical supply.
Skip it if you want a manually cranked system without electrical dependence; the Mytee Products LG28E pair uses a crank handle and two-speed gearbox.
Choose this Ultra-Fab system for fifth-wheel owners who want switch-operated setup and separate footpad placement on uneven ground. The 12-volt power requirement and 6,000-pound-per-leg rating should match the RV’s electrical and support needs.
Full product details
| Brand | Ultra-Fab |
|---|---|
| Item Weight | 50 pounds |
| Item model number | 17943010 |
| Manufacturer | Ultra-Fab Products |
| Part Number | 17-943010 |
| Model | Ultra-Fab Products 17-943010 Ultra Deluxe 5th Wheel Landing Gear |
| Dimensions | 0.4 x 11 x 6 inches |
| Special Features | Allows for independent positioning of foot pads, especially on uneven surfaces. |
| Voltage | 12 volts |
Listed on Amazon as: Ultra-Fab Products 17943010 5th Wheel Electric Landing Gear
View on Amazon
#4 · Best Weld-On Jack
4. BaVekHak Weld-On Jack
- Weight: 25 lb
- Compatible with Vehicle Type: ATV, Car, RV, Trailer, UTV
Best for: Heavy-duty weld-on trailer support.
Why it ranks #4: The 12,000-pound static-rated jack has a 4-inch square tube and 26 inches of total travel for a permanently mounted trailer support.
A 12,000-pound static-load rating paired with 26 inches of total travel makes the BaVekHak a substantial support option for gooseneck, utility, and equipment trailers. Its 4-inch square outer tube is intended to reduce flex under load, while the weld-on connection provides a rigid, permanent attachment for loading, parking, and storage.
The dual-stage arrangement combines 12.5 inches of screw travel with a 13.5-inch drop leg, giving the jack two ways to adjust height across its stated 26-inch total travel. That range can help accommodate trailer setup needs without relying on screw travel alone. The 4-inch square tube and 12,000-pound static rating suit heavier support duties, while the weld-on mounting means installation involves a permanent frame connection rather than a removable clamp-on setup.
- Rated for 12,000 pounds of static load
- 26 inches of total travel from screw and drop-leg stages
- 4-inch square outer tube intended to reduce flex
- Weld-on mounting creates a rigid permanent connection
- Weld-on mounting makes installation permanent rather than readily removable.
Skip it if you need a bolt-on jack that can be transferred between trailers; this model requires a welded frame connection.
Choose this BaVekHak for a heavier gooseneck, utility, or equipment trailer that needs stable front support during loading and storage. Its 26-inch travel is useful, but the permanent weld-on mounting must suit your frame and installation plan.
Full product details
| Brand | BaVekHak |
|---|---|
| Color | black |
| Compatible with Vehicle Type | ATV, Car, RV, Trailer, UTV |
| Included Components | Trailer Jack |
| Item Dimensions | 26 x 11 x 7 inches |
| Item Weight | 25 pounds |
| Load Capacity | 12000 lbs |
| Manufacturer | BaVekHak |
| Part Number | BAJY-TJ-55B |
| Manufacturer Warranty Description | 1 year |
| Material | Alloy Steel, Cast Iron |
| Model Number | BAJY-TJ-55B |
| Style Name | Hydraulic |
Listed on Amazon as: 12000 LBS Weld-On Trailer Jack, 4" Square Tube, 26" Travel, Front Pull Pin
View on Amazon
#5
5. Lippert Hydraulic Left Jack
- Weight: 24 lb
- Dimensions: 32.9 x 17.7 x 15.7 in
Best for: Left-side hydraulic Level Up jack.
Why it ranks #5: This aluminum Level Up replacement jack lists 14,000 pounds of lift capacity and is designed for the left-rear or left-middle position.
This Lippert aluminum hydraulic jack is a replacement for the left-rear or left-middle position in a Level Up automatic leveling system, with a 14,000-pound lift capacity. Its 9-inch-diameter footpad and 27-7/16-inch stated height identify a substantial cylinder for owners replacing a specific side of compatible fifth-wheel RVs or travel trailers.
The left-rear or left-middle position designation makes this a side-specific Level Up replacement, helping buyers avoid treating it as a universal landing leg. Its aluminum hydraulic cylinder is described for replacement with minimal components needed, which supports a direct repair workflow for the named automatic leveling system. The 14,000-pound lift rating and 9-inch footpad define key capacity and ground-contact specifications; confirm the required position and system before choosing this jack.
- 14,000-pound lift capacity
- Aluminum hydraulic cylinder
- 9-inch-diameter footpad
- Specified for left-rear or left-middle Level Up positions
- It is limited to the left-rear or left-middle position in a Level Up system.
Skip it if you need a manual lead-leg drop assembly; the Lippert 179013 is a universal replacement lead drop leg with snap pin.
This Lippert jack suits owners repairing a Level Up automatic system on the specified left-rear or left-middle side. Its hydraulic design and 14,000-pound rating are relevant, but its position-specific application is the essential fit boundary.
Full product details
| Brand | Lippert Components |
|---|---|
| Item Weight | 24 pounds |
| Item model number | 433467 |
| Manufacturer | Lippert |
| Part Number | 433467 |
| Model | Hydraulic Landing Gear Left Replacement Jack for 5th Wheel RVs and Travel Trailers |
| Dimensions | 32.9 x 17.7 x 15.7 inches |
| Special Features | Footpad diameter: 9" , Height: 21-7/16" retracted, Weight capacity: 14,000 lbs. |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Lippert Level Up Replacement Hydraulic Landing Gear Left Jack for 5th Wheel RVs and Travel Trailers, 14,000-lbs. Lift Capacity, Aluminum, 9" Diameter Footpad, 27-7/16" Height – 433467
View on Amazon
#6
6. Lippert 179013 Drop Leg
- Weight: 24.9 lb
- Dimensions: 32 x 6.25 x 2.38 in
Best for: Lippert power-gear lead-leg replacement.
Why it ranks #6: The replacement lead drop leg includes a snap pin, 21-inch stroke, and a further 16 inches of inner-tube extension in one-inch increments.
A 21-inch stroke plus an inner tube that extends another 16 inches in one-inch increments gives this Lippert lead drop leg substantial stated adjustment range. The universal replacement includes a snap pin and is specifically intended for Lippert power landing gear assemblies, making it a focused component choice for compatible fifth-wheel RVs.
The 21-inch stroke handles the listed main travel, while the additional 16 inches of inner-tube extension in one-inch increments lets owners adjust leg length in measured steps. A snap pin is included, simplifying the component package for the replacement job. Lippert identifies this as a lead drop leg for its power landing gear assemblies, so the universal wording does not make it a replacement for every landing gear system.
- 21-inch stroke
- Inner tube extends an additional 16 inches in one-inch increments
- Snap pin included
- Designed for Lippert power landing gear assemblies
- Compatibility is specified for Lippert power landing gear assemblies, not all landing gear systems.
Skip it if you need a leg specifically listed for Venture, Atwood, or Stromberg Carlson systems; the FHRHRY 179013 names those compatibilities.
Choose this Lippert leg when replacing the lead drop leg in a compatible Lippert power landing gear assembly and using its stated adjustment range. Its system-specific application is the main fit boundary despite the universal replacement wording.
Full product details
| Brand | Lippert Components |
|---|---|
| Item Weight | 24.9 pounds |
| Item model number | 179013 |
| Manufacturer | Lippert Components |
| Part Number | 179013 |
| Model | 179013 |
| Dimensions | 32 x 6.25 x 2.38 inches |
| Special Features | 21” stroke, Inner tube extends additional 16” via 1” increments, Powder-coated finish, Snap pin included |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including styrene which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: Lippert 5th Wheel Landing Gear Lead Drop Leg, 29-1/2" Universal Replacement with Snap Pin, Durable Powder-Coated Assembly – 179013
View on Amazon
#7
7. Stromberg Carlson LG-177202
- Weight: 27 lb
- Dimensions: 42 x 7 x 5 in
Best for: Long-stroke fifth-wheel lead leg.
Why it ranks #7: This 33.5-inch fifth-wheel lead leg includes a pin and offers a 19-7/8-inch stroke plus 15-inch inner-tube extension.
A 33.5-inch leg paired with a 19-7/8-inch stroke and 15-inch inner-tube extension gives this Stromberg Carlson lead leg a defined range for fifth-wheel leveling adjustments. It includes a pin and is listed for Venture, Lippert, and Pac-Rim compatibility, making it a focused replacement choice for those landing gear systems.
The 19-7/8-inch stroke provides the stated leveling travel, while the additional 15-inch inner-tube extension adds adjustment for setup on uneven surfaces. At 33.5 inches overall, the leg has a specific size to compare with the part being replaced. Its included pin supports the listed installation package, and compatibility with Venture, Lippert, and Pac-Rim systems helps limit selection to the named fifth-wheel gear families.
- 33.5-inch lead leg
- 19-7/8-inch stroke for leveling adjustment
- 15-inch inner-tube extension
- Pin included; compatible with Venture, Lippert, and Pac-Rim
- Its 33.5-inch leg length may not suit systems requiring a different leg size.
Skip it if you need a 29-1/2-inch lead leg; the Lippert 179013 replacement is listed at that length.
Consider this Stromberg Carlson leg when replacing a compatible fifth-wheel lead leg and needing its stated stroke and inner-tube extension. Its 33.5-inch length and named system compatibility are important boundaries for matching the existing gear.
Full product details
| Brand | Stromberg Carlson |
|---|---|
| Item Weight | 27 pounds |
| Item model number | LG-177202 |
| Manufacturer | Stromberg Carlson Products Inc. |
| Part Number | LG-177202 |
| Model | LG-177202 |
| Dimensions | 42 x 7 x 5 inches |
Listed on Amazon as: Stromberg Carlson LG-177202 Venture Lead Leg – 5th Wheel Landing Gear Replacement for RV, Camper & Trailer – Compatible with Venture, Lippert & Pac-Rim – Pin Included – Black, 33.5" Leg
View on Amazon
#8
8. FHRHRY 179013 Leg
- Compatible with Vehicle Type: RV
Best for: Compatible fifth-wheel replacement leg.
Why it ranks #8: The 29-1/2-inch replacement lead leg includes a drop leg and cage pin, and is listed for Lippert, Venture, Atwood, and Stromberg Carlson systems.
Compatibility with Lippert, Venture, Atwood, and specified Stromberg Carlson landing gear systems is the key appeal of this FHRHRY replacement lead leg. It includes a drop leg and cage pin, giving owners of compatible fifth-wheel RV systems the listed height-adjustment components in one replacement leg rather than a complete paired landing-gear set.
The 29-1/2-inch universal lead leg is listed as a direct fit for Stromberg Carlson LG-1, LG-3, and LG-183708 sets, as well as Lippert, Venture, and Atwood systems. That compatibility information helps narrow its use to the specified fifth-wheel landing gear families. Its included drop leg and cage pin provide the listed components for adjustment and retention, while the 4,000-pound load capacity is the stated limit to consider when selecting it for a replacement.
- Fits listed Lippert, Venture, and Atwood systems
- Direct fit for Stromberg Carlson LG-1, LG-3, and LG-183708
- Includes a drop leg and cage pin
- 29-1/2-inch universal landing gear leg
- The listed load capacity is 4,000 pounds.
Skip it if you need a complete two-leg set or a leg rated above 4,000 pounds; the Mytee Products LG28E pair is listed at 62,000 pounds lift capacity.
This FHRHRY leg suits an owner replacing the lead leg on a compatible fifth-wheel system and needing the included drop leg and cage pin. Check the specified system compatibility and 4,000-pound capacity against the replacement job.
Full product details
| Brand | FHRHRY |
|---|---|
| Color | 179013 |
| Compatible with Vehicle Type | RV |
| Included Components | 1* Landing gear leg(with drop leg and cage pin) |
| Load Capacity | 4000 pound |
| Manufacturer | FHRHRY |
| Part Number | 179013 |
| Manufacturer Warranty Description | 3 Years |
| Material | Steel |
| Model Number | 179013 |
| Style Name | RV Lead Fifth Wheel Landing Gear Leg |

#9
9. HY-SPEED 179013 Leg
- Weight: 12.07 kg
- Compatible with Vehicle Type: RV
Best for: Lead-leg replacement with housing.
Why it ranks #9: This replacement lead leg is listed for Lippert, Venture, Atwood, and Stromberg Carlson systems, with thick-gauge steel construction and housing included.
Compatibility with Lippert, Venture, Atwood, and specified Stromberg Carlson systems makes the HY-SPEED 179013 a targeted fifth-wheel lead-leg replacement. The listing identifies it as a direct replacement for LG-179013 and includes housing, while its thick-gauge steel construction addresses buyers seeking a replacement part rather than an entire landing gear set.
The specified fit covers Stromberg Carlson LG-1, LG-3, and LG-183708 sets, plus Lippert, Venture, and Atwood systems, helping owners identify whether this lead leg matches their existing gear. Its LG-179013 replacement designation further narrows the intended application. The included housing and thick-gauge steel are listed construction and package details for the replacement; because it is a lead leg, it is not a complete two-leg landing gear system.
- Fits listed Lippert, Venture, and Atwood systems
- Compatible with specified Stromberg Carlson landing gear sets
- Direct replacement for LG-179013
- Includes housing and uses thick-gauge steel
- It replaces the lead leg only, not a complete paired landing gear system.
Skip it if you need a follow-leg replacement; the FEXON 179014 is explicitly listed as a fifth-wheel follow landing gear leg.
The HY-SPEED leg is for fifth-wheel owners replacing a compatible lead leg, particularly where the LG-179013 replacement designation applies. Match the listed system family and remember that this is a component, not a complete paired set.
Full product details
| Brand | HY-SPEED |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV |
| Included Components | Comes with housing |
| Item Weight | 12.07 kg |
| Manufacturer | HY-SPEED |
| Part Number | 829-034L |
| Manufacturer Warranty Description | 12 mounts |
| Material | Alloy Steel |
| Model Number | 829-034L |

#10
10. FEXON 179014 Follow Leg
- Weight: 12.11 kg
- Compatible with Vehicle Type: Trailer
Best for: OEM-style fifth-wheel follow leg.
Why it ranks #10: This is a fifth-wheel follow-leg replacement rather than a complete assembly; it lists a 6,000-pound capacity and a 30-day return-and-exchange period.
The FEXON 179014 is a fifth-wheel follow landing gear leg with dimensions stated to match original parts, targeting replacement work where maintaining the existing assembly’s fit matters. Its heavy-gauge steel construction and black powder-coated, rust-inhibitive surface are specified for RV travel and camping, while the listed load capacity is 6,000 pounds.
FEXON identifies this leg as an OEM-design replacement for part LG-179014 and says its height and size match the original part, supporting a like-for-like installation when that is the required replacement. Heavy-gauge steel provides the stated construction, and the powder-coated, rust-inhibitive surface is intended to withstand travel and camping exposure. It is listed at 6,000 pounds capacity; the product is a follow leg, so buyers should distinguish it from a lead-leg replacement.
- OEM-design replacement for LG-179014
- Height and size stated to match original parts
- Heavy-gauge steel construction
- Black powder-coated, rust-inhibitive surface
- This is a follow leg, not the lead-leg replacement.
Skip it if you need a lead leg with a drop leg and cage pin; the HY-SPEED 179013 is listed as a lead leg with those components.
This FEXON leg suits fifth-wheel owners replacing a compatible follow leg who value stated OEM-matched dimensions and coated steel construction. Its 6,000-pound capacity and follow-leg role are the key boundaries when identifying the needed component.
Full product details
| Brand | FEXON |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | No |
| Item Weight | 12.11 kg |
| Load Capacity | 6E+3 pounds |
| Manufacturer | KINGZAUTO |
| Part Number | KZ-RVF-0002 |
| Manufacturer Warranty Description | Free return and exchange within 30 days |
| Material | Steel |
| Model Number | 179014 |
| Style Name | Hydraulic |
Listed on Amazon as: 179014 RV Fifth Wheel Follow Landing Gear Leg 29.5in for RV Trailer
View on AmazonAvoid confusing a complete set with a replacement leg
The most important fitment trap is buying a single replacement leg when the trailer needs a complete landing gear assembly. Mytee Products LG28E and PART STOP LG4001 Set are two-leg assemblies, while FHRHRY 179013 Leg, HY-SPEED 179013 Leg, Stromberg Carlson LG-177202, Lippert 179013 Drop Leg, and FEXON 179014 Follow Leg are individual components. A replacement leg may require the matching lead or follow position, mounting arrangement, and existing drive system.
The listed compatibility clues are not identical: FHRHRY and HY-SPEED name several systems, while Lippert 179013 is specifically described for Lippert power landing gear assemblies. Check the existing part number and whether the failed component is the lead or follow leg before ordering.
A part that shares a nominal length can still be the wrong assembly or position for the trailer.
Treat capacity figures as different measures
Lift capacity and static load capacity describe different stated limits, so do not compare them as though they were the same rating. Mytee Products LG28E lists 62,000 pounds of lift capacity and 160,000 pounds static load capacity; PART STOP LG4001 Set lists 55,000 pounds lifting capacity and 170,000 pounds static load capacity. BaVekHak Weld-On Jack lists a 12,000-pound static load rating, while Ultra-Fab Electric Landing Gear lists 12,000 pounds of lifting capacity for its two-leg system.
The listings do not provide a common test method or enough details to convert these figures into a single ranking of safe working loads. Match the rating type to the job and the trailer manufacturer’s requirements, and do not assume one leg’s capacity equals the capacity of a complete pair.
Confirm the whole assembly’s rating and installation requirements before loading the trailer.
How to Choose Trailer Landing Gear
Assembly type and mounting
Start by deciding whether you need a complete pair, a single replacement component, or a permanently attached jack. Mytee Products LG28E and PART STOP LG4001 Set are complete two-leg assemblies; Ultra-Fab Electric Landing Gear is a powered fifth-wheel system; BaVekHak Weld-On Jack is designed for weld-on mounting. The other listings are replacement legs or jacks intended for particular RV systems or positions.
Buyers outfitting or replacing a commercial trailer assembly should compare the complete sets, while RV owners repairing one side should identify the exact leg and system. A weld-on jack favours someone prepared to make a permanent frame connection, not someone seeking a bolt-in replacement.
Capacity and rating type
Compare the stated capacity and its rating type against the trailer maker’s requirements, rather than treating every number as equivalent. Mytee Products LG28E lists 62,000 pounds of lift capacity and 160,000 pounds static load; PART STOP LG4001 Set lists 55,000 pounds lifting and 170,000 pounds static. BaVekHak Weld-On Jack is rated for 12,000 pounds static load, and Ultra-Fab Electric Landing Gear lists 12,000 pounds total lift capacity.
Lippert Hydraulic Left Jack lists 14,000 pounds lift capacity. Heavy commercial trailer buyers may favour the higher-rated complete sets, while fifth-wheel owners looking for a replacement should prioritize the rating and fitment specified for their particular system.
Operation and travel
Choose the operating style and adjustment range that match how you set up the trailer. Ultra-Fab Electric Landing Gear uses two independent 12-volt motors and a waterproof switch; Mytee Products LG28E uses a two-speed gearbox and crank handle. BaVekHak Weld-On Jack provides 26 inches of total travel, and Lippert 179013 Drop Leg lists a 21-inch stroke plus 16 inches of additional inner-tube extension.
These figures describe different mechanisms and should not be treated as directly comparable travel measurements. Powered operation favours fifth-wheel owners seeking push-button raising and lowering; manual gear suits buyers who want a crank-operated assembly.
Greater extension can help when the setup requires more adjustment, but confirm that the listed travel and mounting dimensions suit the trailer.
Which Trailer Landing Gear Should You Choose?
For a complete, high-capacity commercial trailer set, choose Mytee Products LG28E: it combines a two-leg arrangement with 62,000 pounds of lift capacity and 160,000 pounds static capacity. PART STOP LG4001 Set is another complete semi-trailer assembly, with a crank, shaft, and 55,000/170,000-pound lift and static ratings. For push-button fifth-wheel operation, choose Ultra-Fab Electric Landing Gear.
If you need a permanent single support jack, BaVekHak Weld-On Jack offers 12,000 pounds static capacity and 26 inches of travel. RV owners replacing a specific component should match system and position: Lippert 179013 Drop Leg is for Lippert power gear, while Stromberg Carlson LG-177202 and the FHRHRY and HY-SPEED legs identify compatible RV systems.
Check dimensions and existing part numbers before ordering.
Related Buying Guides
Frequently Asked Questions
How do I confirm whether replacement landing gear will fit my trailer?
Match the replacement to the trailer’s existing part number, landing gear system, and leg position, such as lead or follow. Check dimensions and attachment details against the installed component before ordering. For RV replacements, confirm system compatibility; a listing described as universal does not guarantee fit for every trailer.
What is the difference between lift capacity and static load capacity?
Lift capacity describes the load a landing gear set is rated to raise, while static load capacity describes the load it is rated to support while stationary. Compare both figures with the relevant trailer requirements, and do not treat one rating as interchangeable with the other.
When should I choose electric or hydraulic landing gear instead of a manual system?
Choose electric or hydraulic gear when powered operation suits your trailer and you have confirmed system compatibility. Electric gear is an option for push-button fifth-wheel operation; the listed hydraulic replacement is an RV left jack. A manual assembly may suit buyers seeking a crank-operated setup.
Verify the existing system and position before choosing.
What should I check when replacing an RV landing gear leg?
Check whether the part is a lead or follow leg and whether it matches your RV’s landing gear system. Compare the listed dimensions and existing part number, and confirm any included pin or drop-leg details suit the component being replaced. Similar-looking legs are not necessarily interchangeable.
Can a single support jack replace a landing gear pair?
Not automatically. A weld-on jack is a single support component, while a landing gear pair is an assembly intended to use two legs. Choose the type that matches the trailer’s existing arrangement and intended installation.
For a replacement, confirm mounting position and compatibility rather than substituting one format for another.
Final Words
For a complete, high-capacity commercial trailer set, the Mytee Products LG28E is the strongest overall choice in this roundup, with listed ratings of 62,000 pounds lift and 160,000 pounds static capacity. PART STOP is another complete semi-trailer assembly. RV owners should instead select a system- and position-compatible component; choose Ultra-Fab for powered fifth-wheel operation.
Before ordering, match dimensions and existing part numbers.


