A strong car sound deadening kit offers self-adhesive material, enough coverage for your target panels, and a thickness suited to vibration control; it suits DIY installers who want to quiet road and panel noise. Our picks range from 10 to 36 square feet, with listed thicknesses from 50 to 200 mil and formats that include sheets and a roll. KILMAT 80 mil 36 sqft leads for its combination of stated coverage, but a smaller trunk-focused kit or an install bundle may suit a more specific job.
Check the surface area you plan to cover before choosing: the products vary substantially in coverage, and not every listing specifies the same installation components. This comparison separates broad-coverage choices from kits aimed at a particular panel or project.
KILMAT 80 mil 36 sqft is the best overall choice here because its listing combines 80-mil butyl-and-foil construction, 36 square feet of coverage, and a self-adhesive format described as DIY-friendly. That balance makes it a practical starting point for buyers treating multiple car panels rather than only a trunk. If you need a trunk-specific bundle, Skar Audio 80mil Trunk Kit offers 20 square feet in five sheets; Fatmat 50 mil 25 Sq Ft adds a roller, knife, and instructions for installation.
Our Top Picks
Best OverallIt combines 80-mil butyl-and-foil material with 36 square feet of coverage and a self-adhesive format described as suitable for DIY installation.
View on Amazon
Broad CoverageIts 80-mil butyl mat offers 36 square feet, matching KILMAT's listed coverage and thickness for buyers treating several vehicle panels.
View on Amazon
Most CoverageThe 50-mil butyl mat supplies 36 square feet in 18 sheets and is recommended for car panels, including trunks, doors, floors, and ceilings.
View on Amazon- Trunk-Focused Skar Audio 80mil Trunk Kit
- Install Bundle Fatmat 50 mil 25 Sq Ft
Compare coverage, construction, and included installation items
| # | Product | Dimensions | Material | Material Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. KILMAT 80 mil 36 sqftBest Overall | 15.7"L x 9.8"W | Aluminum | Aluminum | View on Amazon |
| 2 | 2. Siless 80 mil 36 sqftBroad Coverage | 23.6"L x 15.94"W | butyl | butyl | View on Amazon |
| 3 | 3. CANOPUS 50 mil 36 sqftMost Coverage | — | Butyl | Butyl | View on Amazon |
| 4 | 4. Skar Audio 80mil Trunk KitTrunk-Focused | 31.5"L x 18"W | Butyl Rubber and Aluminum | Butyl Rubber and Aluminum | View on Amazon |
| 5 | 5. Fatmat 50 mil 25 Sq FtInstall Bundle | 18"L x 6"W | Aluminum | Aluminum | View on Amazon |
| 6 | 6. Siless Hybrid 3in1 200 milThick hybrid sound treatment | 15.39"L x 9.76"W | Butyl Rubber | Butyl Rubber | View on Amazon |
| 7 | 7. CUKWUYBY 80mil 36sqft80-mil butyl coverage projects | 15.75"L x 9.84"W | Butyl | Butyl | View on Amazon |
| 8 | 8. CANOPUS 80 mil 10 sqft80-mil treatment for targeted areas | 14.49"L x 10"W | Rubber | Rubber | View on Amazon |
| 9 | 9. Amazon Basics 10-PackCut-to-fit cabin and trunk panels | 14.5"L x 10"W | Aluminum, Rubber | Aluminum, Rubber | View on Amazon |
| 10 | 10. Shumoff Super JACK 142 milThick first-layer panel damping | 14.6"L x 10.6"W | Aluminum, Bitumen, Mastic Composite | Aluminum, Bitumen, Mastic Composite | View on Amazon |
Detailed Reviews: Best Sound Deadening Kits For Cars

#1 · Best Overall
1. KILMAT 80 mil 36 sqft
- Dimensions: 15.7"L x 9.8"W
- Material: Aluminum
- Material Type: Aluminum
Best for: DIY projects needing thick butyl.
Why it ranks #1: It combines 80-mil butyl-and-foil material with 36 square feet of coverage and a self-adhesive format described as suitable for DIY installation.
An 80-mil butyl-and-foil mat gives the KILMAT kit a thicker profile than thinner sound-deadening sheets, helping damp vehicle noise and vibration. Its self-adhesive backing and DIY-friendly description make it a practical option for owners who want to apply insulation themselves across a car interior.
The 36-square-foot coverage gives you material for a broader project, while the listed 15.7-by-9.8-inch dimensions describe manageable sections for working around vehicle panels. KILMAT identifies the material as butyl with a foil facing and a weight of 0.5 pounds per square foot, pairing vibration-damping material with a form that can be applied to prepared surfaces. Its self-adhesive construction supports a DIY workflow; wear gloves because the installation information warns of sharp edges.
- 80-mil thickness
- 36 square feet of coverage
- Self-adhesive butyl and foil construction
- Listed as suitable for DIY installation
- Installation requires care around the material's sharp edges.
Skip it if you need a trunk-specific kit in larger sheets; Skar Audio's SK2MM-TRUNKKIT lists five 18-by-31.5-inch sheets.
For DIY installers treating several car areas, KILMAT combines 80-mil material with 36 square feet of coverage. Plan around the sheet dimensions, prepare the metal surface, and wear gloves during installation to protect your hands.
Full product details
| Brand | KILMAT |
|---|---|
| Included Components | Comes as a Combo Set |
| Item Dimensions L x W | 15.7"L x 9.8"W |
| Item Weight | 17 pounds |
| Manufacturer | KILMAT |
| Part Number | KLM8036 |
| Material | Aluminum |
| Model Number | KLM8018 |
| Dimensions | 15.7"L x 9.8"W |
| Recommended Uses | Sound deadening |
Listed on Amazon as: KILMAT 80 mil 36 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
View on Amazon
#2 · Broad Coverage
2. Siless 80 mil 36 sqft
- Dimensions: 23.6"L x 15.94"W
- Material: butyl
- Material Type: butyl
Best for: Broad 80-mil car treatment.
Why it ranks #2: Its 80-mil butyl mat offers 36 square feet, matching KILMAT's listed coverage and thickness for buyers treating several vehicle panels.
Siless lists 80-mil butyl material in a 36-square-foot car sound-deadening mat, providing a substantial stated area for tackling multiple vehicle panels. The product is specifically recommended for car soundproofing and sound damping, making it a direct option for owners seeking one material type across a broader automotive project.
The listed 23.6-by-15.94-inch product dimensions give an indication of the mat’s working size, while the 36-square-foot title coverage helps estimate how much area the set can treat. Siless specifies butyl material and 80-mil thickness, connecting the product to the listed goals of soundproofing and damping. The supplied details do not identify an included roller or other installation kit, so plan the application around the mat itself and the work required to prepare and cover vehicle panels.
- 80-mil thickness
- 36 square feet of coverage
- Butyl material
- Recommended for car soundproofing and sound damping
- The supplied specifications do not list an included installation kit.
Skip it if you want a trunk-specific kit in five large sheets; Skar Audio's SK2MM-TRUNKKIT lists that format.
Siless fits car owners planning a broader sound-damping project who want 80-mil butyl material and stated 36-square-foot coverage. The supplied specifications do not describe application tools, so account for your installation needs separately.
Full product details
| Brand | Siless |
|---|---|
| Item Dimensions L x W | 23.6"L x 15.94"W |
| Item Weight | 16.5 pounds |
| Manufacturer | Bema Group Inc. |
| Part Number | VAR8036MIL |
| Material | butyl |
| Model Number | 36 sqft |
| Dimensions | 23.6"L x 15.94"W |
| Recommended Uses | Car soundproofing and sound dampening |
Listed on Amazon as: Siless 80 mil 36 sqft Car Sound Deadening mat – Butyl Automotive Sound Deadener – Noise Insulation and Vibration Dampening Material
View on Amazon
#3 · Most Coverage
3. CANOPUS 50 mil 36 sqft
- Material: Butyl
- Material Type: Butyl
Best for: 50-mil coverage for multiple panels.
Why it ranks #3: The 50-mil butyl mat supplies 36 square feet in 18 sheets and is recommended for car panels, including trunks, doors, floors, and ceilings.
CANOPUS pairs 50-mil butyl material with 36 square feet of stated coverage across 18 sheets, giving installers a defined quantity for treating several car panels. The listing names trunks, doors, floors, and ceilings as intended areas, so the kit can support a varied interior sound-deadening plan.
The 18-sheet format divides the stated 36 square feet into pieces for distributing material among different panels, while the self-adhesive butyl construction supports direct application. CANOPUS specifies 50-mil thickness and identifies car panels as the recommended soundproofing use. Its listed target areas include the trunk, doors, floor, and ceiling, allowing a buyer to plan coverage around those locations. The supplied specifications do not state individual sheet dimensions, so map the vehicle areas against the total coverage before starting.
- 36 square feet of stated coverage
- 18-sheet set
- 50-mil butyl material
- Listed for trunks, doors, floors, and ceilings
- Individual sheet dimensions are not specified in the supplied details.
Skip it if you want 80-mil material in a smaller stated area; CANOPUS's 80 mil 10sqft – Noir offers that thickness.
This CANOPUS set suits owners distributing 50-mil butyl across several listed interior areas, from doors to the ceiling. Its 36-square-foot total helps with planning, but the missing individual sheet dimensions matter when laying out panel coverage.
Full product details
| Brand | CANOPUS |
|---|---|
| Included Components | Case |
| Manufacturer | CANOPUS |
| Part Number | 00445-SoundDead-Black-50mil-36sqft |
| Material | Butyl |
| Model Number | SDM 50 Mil |
| Recommended Uses | soundproofing car panels |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: CANOPUS Sound Deadening Mat for Cars, 50 mil 36 sqft, Pack of 18 Sheets, Butyl Sound Deadener Mat, Audio Car Sound Dampening Material for Car Trunk, Door, Floor and Ceiling, Black
View on Amazon
#4 · Trunk-Focused
4. Skar Audio 80mil Trunk Kit
- Dimensions: 31.5"L x 18"W
- Material: Butyl Rubber and Aluminum
- Material Type: Butyl Rubber and Aluminum
Best for: Trunk-focused sound treatment.
Why it ranks #4: This purpose-labeled trunk kit provides 20 square feet across five 18-by-31.5-inch sheets, with 2.0-millimeter butyl rubber and aluminum construction.
Five large 18-by-31.5-inch sheets give the Skar Audio trunk kit a clearly targeted format for covering broad trunk surfaces. The 20-square-foot set uses 2.0-millimeter butyl rubber with an aluminum outer layer, helping address unwanted road noise and vibration while also assisting with interior temperature regulation.
The self-adhesive backing supports direct application, and the five large sheets can make a trunk project easier to lay out than numerous smaller pieces. Skar lists the material as 2.0 millimeters thick, with aluminum outside and butyl rubber inside, linking its layered construction to noise and vibration control. The kit is specifically presented for trunks and totals 20 square feet, so its coverage and sheet format suit a focused installation rather than a whole-car coverage plan.
- Trunk-focused kit
- 20 square feet total
- Five 18-by-31.5-inch sheets
- Self-adhesive butyl rubber and aluminum construction
- The 20-square-foot coverage is limited for treating an entire vehicle.
Skip it if you want a roll and included installation tools; FatMat's FatMat 50MIL pack lists a roller, knife, and instructions.
This kit suits an owner concentrating sound treatment on a vehicle trunk, especially where broad sheets simplify coverage. Its 20-square-foot total is the boundary: calculate the target area before choosing it for anything beyond a focused trunk project.
Full product details
| Brand | Skar Audio |
|---|---|
| Item Dimensions L x W | 31.5"L x 18"W |
| Item Weight | 17.6 pounds |
| Manufacturer | Skar Audio |
| Part Number | SK2MM-TRUNKKIT |
| Material | Butyl Rubber and Aluminum |
| Model Number | SK2MM-TRUNKKIT |
| Dimensions | 31.5"L x 18"W |
| Recommended Uses | Automotive soundproofing and temperature regulation |
Listed on Amazon as: Skar Audio Premium 80mil (2mm) 20 Sq Ft Automotive Car Sound Deadening Trunk Kit (SK2MM-TRUNKKIT)
View on Amazon
#5 · Install Bundle
5. Fatmat 50 mil 25 Sq Ft
- Dimensions: 18"L x 6"W
- Material: Aluminum
- Material Type: Aluminum
Best for: Install-kit roll for DIY work.
Why it ranks #5: The 25-square-foot, 50-mil roll includes instructions, a roller, and a knife, useful for an installer wanting supplied tools alongside the mat.
A roller, knife, and instructions come with FatMat’s 25-square-foot self-adhesive roll, giving DIY installers key tools alongside the sound-deadening material. Its nominal 50-mil thickness and pliable construction support cutting and shaping for automotive doors, floors, and trunk floors, as well as other listed applications.
The 18-inch-wide roll stretches 16.75 feet, offering a continuous length that can be measured and cut for different panel shapes. FatMat says the material conforms and fuses easily to sheet metal, while the included roller and knife support the placement and trimming workflow. At 50 mil nominal thickness, it is intended to absorb vibration and noise and enhance audio clarity. Its listed uses also extend to trucks, homes, RVs, and marine applications.
- 25 square feet in an 18-inch-wide roll
- Includes roller, knife, and instructions
- Pliable material is easy to cut and conform
- Listed for doors, floors, and trunk floors
- At 50 mil nominal thickness, it is thinner than the listed 80-mil options.
Skip it if you want 80-mil material in a 36-square-foot set; KILMAT's 80 mil 36 sqft mat offers that combination.
FatMat fits DIY installers who value a roll and supplied cutting and rolling tools for shaping material across doors, floors, or a trunk floor. Its 50-mil nominal thickness and 25-square-foot coverage set practical limits for the project.
Full product details
| Brand | Fatmat |
|---|---|
| Included Components | Install Kit, Sound Dampening Roll or Sheets |
| Item Dimensions L x W | 18"L x 6"W |
| Manufacturer | FatMat Sound Control Inc. |
| Part Number | FM25 |
| Material | Aluminum |
| Model Number | FatMat 50MIL Made IN USA |
| Dimensions | 18"L x 6"W |
| Recommended Uses | Automotive, Trucks, Homes, RVs, Marine |
Listed on Amazon as: Self-Adhesive FatMat Sound Deadener Pack with Install Kit – 25 Sq Ft x 50 mil Thick
View on Amazon
#6
6. Siless Hybrid 3in1 200 mil
- Dimensions: 15.39"L x 9.76"W
- Material: Butyl Rubber
- Material Type: Butyl Rubber
Best for: Thick hybrid sound treatment.
Why it ranks #6: Its listed 200-mil thickness and 25-square-foot coverage stand out, though the supplied specifications offer less detail about installation components.
Siless Hybrid’s 200-mil thickness is the defining feature for buyers prioritizing a particularly thick sound-deadening mat. The listing identifies it as a three-in-one product with 25 square feet of coverage, using butyl rubber for automotive soundproofing and sound damping across a defined project area.
The 200-mil profile distinguishes this mat from thinner options, while the 25-square-foot coverage sets a clear limit for project planning. Siless names the product Hybrid 3in1, but the supplied specifications do not describe the separate functions behind that label, so buyers should rely on the stated automotive soundproofing and damping use. Its butyl-rubber material supports that application, and the listed 15.39-by-9.76-inch dimensions help indicate the format for handling pieces during installation.
- 200-mil thickness
- 25 square feet of coverage
- Butyl rubber material
- Listed for automotive soundproofing and sound damping
- The 25-square-foot coverage is smaller than the listed 36-square-foot mats.
Skip it if you need 36 square feet of stated coverage; KILMAT's 80 mil 36 sqft mat offers a larger project area.
Siless Hybrid suits buyers seeking a very thick mat for a defined automotive sound-damping project. Its 25-square-foot coverage is the main planning boundary, and the supplied details do not explain the individual functions behind the three-in-one label.
Full product details
| Brand | Siless |
|---|---|
| Item Dimensions L x W | 15.39"L x 9.76"W |
| Manufacturer | Bema Group Inc. |
| Part Number | SLH20025 |
| Material | Butyl Rubber |
| Model Number | SLH20025 |
| Dimensions | 15.39"L x 9.76"W |
| Recommended Uses | Automotive soundproofing and sound dampening |
Listed on Amazon as: Siless Hybrid 3in1 200 mil 25 sqft Car Sound Deadening mat – Butyl Automotive Sound Deadener – Noise Insulation and Vibration Dampening Material
View on Amazon
#7
7. CUKWUYBY 80mil 36sqft
- Dimensions: 15.75"L x 9.84"W
- Material: Butyl
- Material Type: Butyl
Best for: 80-mil butyl coverage projects.
Why it ranks #7: The listing gives 80-mil thickness and 36-square-foot coverage in butyl, but provides fewer installation and construction details than higher-ranked options.
The CUKWUYBY listing specifies 80-mil butyl material and 36 square feet of coverage, combining a thick sound-deadening format with area for a substantial car project. Its title identifies a 33-count set, while the product specifications describe the material as butyl and recommend it for sound insulation.
The 36-square-foot coverage gives the stated quantity for planning a multi-panel installation, and the 80-mil thickness identifies the mat’s nominal profile. CUKWUYBY lists butyl as its material and sound insulation as the recommended use, so the supplied facts support considering it for vehicle noise-treatment work. The listed dimensions are 15.75 by 9.84 inches. Because the product information supplies few installation details, buyers should base their workflow on the dimensions and material rather than assume included tools or backing features.
- 80-mil thickness stated in the title
- 36 square feet stated in the title
- Butyl material
- 33-count set stated in the title
- The supplied listing does not specify adhesive backing or installation tools.
Skip it if you want a documented self-adhesive kit with tools; FatMat's FatMat 50MIL pack lists a roller, knife, and instructions.
CUKWUYBY suits buyers seeking stated 80-mil butyl material and 36 square feet for sound insulation. The listing provides limited installation information, so it is a better fit for shoppers who can plan their application without relying on specified included tools.
Full product details
| Brand | CUKWUYBY |
|---|---|
| Included Components | Sound Deading Material |
| Item Dimensions L x W | 15.75"L x 9.84"W |
| Manufacturer | CUKWUYBY |
| Material | Butyl |
| Model Number | Sound Deading Material |
| Dimensions | 15.75"L x 9.84"W |
| Recommended Uses | Sound Insulation |
Listed on Amazon as: Butyl Sound Deadening 80mil 36sqft Sound Deadening Mat, 33 Count
View on Amazon
#8
8. CANOPUS 80 mil 10 sqft
- Dimensions: 14.49"L x 10"W
- Material: Rubber
- Material Type: Rubber
Best for: 80-mil treatment for targeted areas.
Why it ranks #8: This self-adhesive 80-mil butyl option suits a smaller panel job, but its 10-square-foot coverage limits its usefulness for wider projects.
CANOPUS specifies 80-mil butyl material in a compact 10-square-foot set, making this mat suited to targeted treatment of a trunk, doors, floor, or ceiling. The listing describes a self-adhesive sound-control material weighing 0.7 pounds per square foot, pairing a thick profile with a stated application weight.
The ten-sheet pack provides a defined quantity for a smaller or focused installation, while the 14.49-by-10-inch listed dimensions help plan placement across panels. CANOPUS names 80-mil thickness and butyl construction, with car sound insulation as the recommended use; the listing also identifies trunks, doors, floors, and ceilings as application areas. At 0.7 pounds per square foot, the stated weight offers a useful figure when considering where to apply material. The 10-square-foot total is the main coverage constraint.
- 80-mil thickness
- 10 square feet of coverage
- Ten sheets measuring 14.49 by 10 inches
- Stated weight of 0.7 pounds per square foot
- The 10-square-foot total limits it to a targeted treatment area.
Skip it if you need 36 square feet for several panels; CANOPUS's SDM 50 Mil lists that larger coverage.
Choose this CANOPUS mat for focused 80-mil sound insulation on selected trunk, door, floor, or ceiling areas. Its 10-square-foot coverage favors a limited project, so calculate the target panels before deciding whether the set is sufficient.
Full product details
| Brand | CANOPUS |
|---|---|
| Item Dimensions L x W | 14.49"L x 10"W |
| Manufacturer | CANOPUS |
| Part Number | CA-01 |
| Material | Rubber |
| Model Number | 80 mil 10sqft – Noir |
| Dimensions | 14.49"L x 10"W |
| Recommended Uses | car sound insulation |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
Listed on Amazon as: CANOPUS Car Sound Deadening Mat – 80 mil, 10 sqft, Butyl Sound Deadener for Trunk, Doors, Floor & Ceiling, Audio Dampening Material, Pack of 10 Sheets, Black
View on Amazon
#9
9. Amazon Basics 10-Pack
- Dimensions: 14.5"L x 10"W
- Material: Aluminum, Rubber
- Material Type: Aluminum, Rubber
Best for: Cut-to-fit cabin and trunk panels.
Why it ranks #9: Ten pliable, self-adhesive pieces can be cut for an interior, cabin floor, or trunk, but the listing gives no total coverage or thickness.
Ten pliable, self-adhesive pieces make the Amazon Basics mat a straightforward choice for cutting material to fit a cabin floor or trunk. Its butyl-rubber-based substrate addresses vehicle and road noise and vibration, while the reflective aluminum front is specified to provide better thermal insulation.
Each piece measures 14.5 by 10 inches, giving installers separate sections to trim for interior areas rather than working from one continuous roll. The self-adhesive backing supports placement, and the product description lists an installation kit with instructions to guide the process. Use the pliable material on a vehicle interior, cabin floor, or trunk as described; its aluminum facing adds a thermal-insulation role alongside noise and vibration reduction. The listing specifies ten pieces.
- Ten pieces measuring 14.5 by 10 inches
- Pliable material can be cut to size
- Self-adhesive backing
- Reflective aluminum front for thermal insulation
- The listing gives no total square-foot coverage figure for the ten-piece set.
Skip it if you need stated 36-square-foot coverage; CANOPUS's SDM 50 Mil lists that area in an 18-sheet set.
This set suits owners cutting separate pieces for cabin, floor, or trunk treatment and who value an aluminum face for thermal insulation. Its listing does not state total coverage, so plan the project around the ten individual pieces.
Full product details
| Brand | Amazon Basics |
|---|---|
| Item Dimensions L x W | 14.5"L x 10"W |
| Item Weight | 10.88 ounces |
| Manufacturer | Amazon |
| Part Number | AMZ1905 |
| Material | Aluminum, Rubber |
| Model Number | AMZ1905 |
| Dimensions | 14.5"L x 10"W |
| Recommended Uses | Car |
Listed on Amazon as: Amazon Basics Car Sound Deadening Mat, 14.5" x 10", 10-Pack, Noise and Heat Insulation, Self-Adhesive, Vibration Dampening
View on Amazon
#10
10. Shumoff Super JACK 142 mil
- Dimensions: 14.6"L x 10.6"W
- Material: Aluminum, Bitumen, Mastic Composite
- Material Type: Aluminum, Bitumen, Mastic Composite
Best for: Thick first-layer panel damping.
Why it ranks #10: It is designed for automotive vibration reduction, but its 14-square-foot coverage and bitumen-mastic composite make it a more specialized choice than the listed butyl mats.
At 3.6 millimeters, or 142 mil, the Shumoff Super JACK is substantially thick material intended as a first layer for reducing vibration from vehicle body panels. Its 14-square-foot set contains 13 self-adhesive sheets, offering a defined quantity for targeted panel treatment rather than an unspecified roll.
Shumoff describes Super JACK as a vibration-reduction material for vehicle body panels, with a fiber-strength mastic formula intended to absorb vibrations across various frequency ranges. That first-layer role gives it a specific place in a sound-control installation: apply it to panels where resonance reduction is the goal. The 13-sheet set totals 14 square feet, and the self-adhesive format supports placement without a separately listed adhesive. Its thickness makes checking available panel clearance important before application.
- 3.6-millimeter, 142-mil thickness
- 13 sheets provide 14 square feet total
- Self-adhesive construction
- Specified as a first layer for body-panel vibration reduction
- The 14-square-foot coverage limits it to a smaller or targeted installation.
Skip it if you need 36 square feet of 80-mil material; Siless's 80 mil 36 sqft mat lists that larger coverage.
Choose Super JACK for targeted body-panel work where a thick, first-layer vibration treatment suits the installation. Its 14-square-foot coverage is the key boundary, and check panel clearance before applying the 3.6-millimeter material.
Full product details
| Brand | Shumoff |
|---|---|
| Included Components | 13 sheets of sound deadening mat |
| Item Dimensions L x W | 14.6"L x 10.6"W |
| Manufacturer | Shumoff |
| Material | Aluminum, Bitumen, Mastic Composite |
| Model Number | SJ-36MM-36 |
| Dimensions | 14.6"L x 10.6"W |
| Recommended Uses | Automotive sound deadening, vibration reduction, noise reduction, vehicle body panel insulation |
Why coverage calculations can go wrong
Coverage can be misleading if you treat a package’s total area as a ready-made fit for your car. These products range from 10 square feet for CANOPUS 80 mil 10 sqft to 36 square feet for KILMAT 80 mil 36 sqft and Siless 80 mil 36 sqft; the listed sheet or roll formats also differ. Measure the flat panel areas you intend to treat, then allow for contours, cutouts, and overlaps rather than assuming every square foot in the package will cover a square foot of panel.
A smaller sheet may be easier to place around shapes, while a roll such as Fatmat 50 mil 25 Sq Ft can be cut to fit, but neither format eliminates trimming. Also check whether a listing specifies package coverage: Amazon Basics 10-Pack gives piece dimensions but no total square-foot figure in the supplied specifications.
Comparing only pack counts can lead to buying too little or more material than the job calls for.
What a vibration mat can and cannot tell you
A listed sound deadening mat is primarily described here as a way to damp vibration and reduce noise; these listings do not establish that it blocks every type of cabin sound. KILMAT, Siless, and several other products identify butyl construction, while Shumoff Super JACK 142 mil is described as an aluminum, bitumen, and mastic composite. Thickness alone is not a complete comparison: the listings span 50 to 200 mil, but they do not provide a common test result that would prove one mat makes a cabin quieter than another.
A mat may be a useful first layer on vibrating body panels, as Shumoff’s description explicitly positions its product, but buyers should not assume that a single layer solves airborne noise or replaces other insulation. Match the product to the panel and project, and treat performance language as a product claim rather than a standardized head-to-head result.
How to Choose a Car Sound Deadening Kit
Coverage for your project
Choose coverage by the area you plan to treat, not by the number of pieces in the box. The listed options span 10 square feet for CANOPUS 80 mil 10 sqft, 14 square feet for Shumoff Super JACK 142 mil, 20 square feet for Skar Audio 80mil Trunk Kit, 25 square feet for Fatmat 50 mil 25 Sq Ft, and 36 square feet for several mats. A small repair or one limited panel can favour the 10-square-foot CANOPUS option; a trunk job can suit Skar Audio’s 20-square-foot kit; broader coverage favours a 36-square-foot product.
Measure first and account for cutouts and panel shapes. Not every listing gives the same dimensions or a total area, so verify the package’s stated coverage before ordering.
Thickness and material
Compare both the listed thickness and the material rather than choosing by thickness alone. This set ranges from 50 mil for Fatmat 50 mil 25 Sq Ft and CANOPUS 50 mil 36 sqft to 80 mil for KILMAT 80 mil 36 sqft, Siless 80 mil 36 sqft, and other options; Siless Hybrid 3in1 200 mil lists 200 mil. Most listed sound mats use butyl or butyl rubber, while Shumoff Super JACK 142 mil specifies an aluminum, bitumen, and mastic composite.
A buyer seeking a familiar butyl construction has several choices across coverage sizes. If thickness is the priority, the higher-mil listings merit consideration, but the supplied data does not provide standardized comparative test results.
Match material and format to the intended panel and installation plan.
Installation format and supplied tools
Look for a format and tool bundle that match your installation experience and work area. Fatmat 50 mil 25 Sq Ft is a roll and includes instructions, a roller, and a knife; Skar Audio 80mil Trunk Kit comes as five large sheets, while CANOPUS 50 mil 36 sqft is listed as 18 sheets. KILMAT 80 mil 36 sqft describes its self-adhesive material as user-friendly for DIY installation, and Amazon Basics 10-Pack also specifies pliable, self-adhesive pieces.
A first-time installer who wants tools included may favour Fatmat, while someone working around shaped panels may prefer separate sheets that can be positioned individually. Check the actual surface and package details: the listed products do not all specify included tools, and self-adhesive backing does not remove the need for careful panel preparation.
Which sound deadening kit should you choose?
For a broad DIY project, choose KILMAT 80 mil 36 sqft: its 80-mil butyl-and-foil construction, 36-square-foot coverage, and self-adhesive format make it the most balanced pick. If matching coverage with an 80-mil butyl mat matters, Siless 80 mil 36 sqft is another option. For a trunk-only job, Skar Audio 80mil Trunk Kit supplies five sheets over 20 square feet.
Prefer tools included? Fatmat 50 mil 25 Sq Ft pairs a 25-square-foot roll with a roller, knife, and instructions.
For a smaller targeted job, CANOPUS 80 mil 10 sqft lists 10 square feet, while CANOPUS 50 mil 36 sqft offers wider coverage in 18 sheets. Consider Siless Hybrid 3in1 200 mil if listed thickness is your priority, but compare the available coverage and product details against your panel plan.
Related Buying Guides
- Best Sound Deadening For Car
- Best Sound Deadening Mat For Cars
- Best Auto Sound Deadening
- Best Sound Deadening Material For Car
- Best Sound Deadening Undercoating
- Best Sound Deadening Material For Truck
Frequently Asked Questions
How much of a car should I cover with sound deadening material?
Cover the panels that matter most for your noise concerns rather than assuming every surface needs treatment. Plan coverage by panel area and the product’s listed square footage, leaving room for cuts and fitting. For multiple panels, a larger coverage listing may be more practical; for a targeted job, a smaller pack may suffice.
Should sound deadening go on the doors, floor, trunk, or roof first?
Start with the area most relevant to your noise concern and project plan. Doors and the trunk can be practical targeted areas, while floor or roof work involves different panel access. Check how much material each area requires before beginning, and prioritize coverage you can install carefully rather than trying to treat every panel at once.
How should I prepare car panels before applying sound deadening mats?
Prepare panels by removing trim as needed, then cleaning the application surface so it is dry and free of dust, grease, and loose debris. Let the surface dry fully before fitting the mat. Measure and cut pieces to fit the panel, and follow the product’s installation instructions for application.
How can I choose between a roll and individual sheets?
Choose based on the shape of the panels and how you want to plan the work. Rolls can be measured and cut for varied areas, while packs listing a set number of sheets provide pre-separated pieces. Compare the listed coverage and included installation items with your panel plan before choosing.
What should I compare besides listed thickness?
Compare the listed coverage, material description, format, and any included installation items alongside thickness. For example, the listed options range from 10 to 36 square feet, and Fatmat includes a roller, knife, and instructions. Match those details to the panels you intend to treat rather than relying on thickness alone.
Final Words
For a multi-panel DIY project, KILMAT 80 mil 36 sqft is the most balanced choice in this group, combining listed 80-mil butyl-and-foil construction, 36-square-foot coverage, and a self-adhesive format. Choose Skar Audio’s trunk kit for a trunk-focused job, or Fatmat if its included roller, knife, and instructions suit your installation plan. For smaller targeted work, compare the CANOPUS coverage options; check each listing against your panel measurements before deciding.

