Best Hitch Receiver For Travel Trailer: Frame and Bumper Options

#1 · Best Overall

1. CURT 13703 Adjustable Hitch

• Material Type: Carbon Steel
• Compatible with Vehicle Type: ATV, Marine-Personal-Craft, Trailer

Best for: Higher-rated adjustable RV-frame hitch.

Why it ranks #1: Adds a standard 2-inch receiver to compatible RV frames and lists 3,500-pound gross trailer and 350-pound tongue ratings, subject to system limits.

A 3,500-pound gross-trailer-weight rating and 350-pound tongue-weight rating distinguish the CURT 13703 among these adjustable RV hitches. It adds a standard 2-inch receiver to compatible RV, camper, or motorhome frames, allowing use with towing accessories, cargo carriers, trailers, or small-vehicle towing within all applicable limits.

The adjustable design is rated up to 72 inches, giving buyers a broader frame-width range to work with when positioning a receiver on an RV, camper, or motorhome. Its 2-by-2-inch opening accepts common towing accessories and cargo carriers, while the stated 3,500-pound gross trailer and 350-pound tongue ratings establish upper limits. Those figures remain subject to the lowest-rated towing component, RV frame capacity, and vehicle-manufacturer limits; the hitch is not rated for weight distribution.

Skip it if you need a bumper-clamp accessory receiver; the TOPTOW 63801 mounts to specified continuous steel bumpers.

Consider the CURT for a compatible RV frame and a buyer needing an adjustable 2-inch receiver with stated towing ratings. Respect the lowest component, frame, and vehicle limits; it is not rated for weight distribution.

Listed on Amazon as: CURT 13703 Adjustable RV Trailer Hitch, 2-Inch Receiver, 72-Inch Max

#2 · Best Class 3 Option

2. KUAFU Universal Class 3 Hitch

• Maximum Towing Capacity: 3500 lb
• Compatible with Vehicle Type: Trailer

Best for: Frame-mounted heavy-accessory receiver.

Why it ranks #2: Frame-fastened universal hitch lists 3,500-pound gross trailer and 350-pound tongue ratings, with included hardware and a 2-inch receiver.

A 2-inch rear receiver rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight gives the KUAFU hitch a stated towing capacity alongside accessory utility. Its heavy-duty steel construction and included frame-fastening hardware serve buyers adding a ball mount, cargo carrier, bicycle frame, winch, or other heavy accessory.

The receiver’s 2-inch opening accommodates listed uses including ball mounts, cargo carriers, bicycle frames, trailers, and winches, providing one interface for varied rear-mounted equipment. KUAFU specifies a 3,500-pound gross trailer weight and 350-pound tongue weight, giving buyers concrete rating limits to consider alongside the trailer and vehicle. Included hardware fastens the hitch to the frame, while the black powder-coated finish is specified for the product; the listing describes the attachment location as the rear.

Skip it if you need a receiver that clamps to a specified bumper beam; the Nilight 92116B is a bolt-on bumper option.

This KUAFU is for buyers seeking a frame-fastened rear receiver for a ball mount, winch, cargo carrier, or trailer. Its ratings are specific limits, and the frame attachment is central to installation.

Listed on Amazon as: KUAFU Universal RV Trailer Hitch 2 Inch Class 3 Mount Receiver Tow Hitch

#3 · Best Fifth-Wheel Fit

3. Stromberg Carlson CC-300

• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car, Trailer

Best for: Adjustable trailer-frame accessory hitch.

Why it ranks #3: Specifically creates a 2-inch receiver on travel trailers and fifth wheels; it can be bolted on as Class I or welded as Class II.

The Stromberg Carlson CC-300 offers two attachment approaches: bolt it on as a Class I hitch or weld it as Class II. That choice creates a 2-inch receiver on a travel trailer or fifth wheel for mounting a bike rack or cargo carrier, with the installation method tied to the desired hitch class.

A 2-inch receiver gives the CC-300 a standard interface for bike racks and cargo carriers, making it useful when adding accessory capacity at the back of a travel trailer or fifth wheel. Its Class I bolt-on and Class II weld-on options let the frame attachment method determine the hitch class, rather than forcing one installation route. At 46.9 pounds, the hitch itself is substantial; buyers should account for that weight when planning installation and handling.

Skip it if you need a bumper-mounted receiver rather than a frame-attached hitch; the TOPTOW 63801 fits specified steel bumpers.

This suits an RV owner who wants a 2-inch accessory receiver on a travel trailer or fifth wheel and can choose between bolting or welding to the frame. Its 46.9-pound weight matters during installation.

Listed on Amazon as: Stromberg Carlson CC-300 Adjustable Accessory Hitch – Hitch Receiver for Bike Rack and Carriers, Ideal for Back of Camper, Travel Trailer & RV, Camper Trailer Hitch, Adjustable Truck Hitch, Black

#4 · Best Adjustable Design

4. ALMULOO Adjustable RV Hitch

• Maximum Towing Capacity: 3500 lb
• Material Type: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Direct-bolt adjustable frame receiver.

Why it ranks #4: Three-piece adjustable design bolts onto RV frames and lists 3,500-pound trailer and 350-pound tongue ratings; vertical hanging bike racks are excluded.

A three-piece adjustable design that fits frames up to 7 inches gives the ALMULOO receiver a specific installation range. It provides a 2-inch Class 3 receiver with stated ratings of 3,500 pounds gross trailer weight and 350 pounds tongue weight for compatible RV applications.

The three-piece adjustment and direct bolt-on installation can help position the hitch on a frame within the stated up-to-7-inch fit, without a listed welding step. Its 2-inch opening accepts ball mounts, cargo racks, and bike racks, supporting several common accessory workflows. ALMULOO rates it at 3,500 pounds trailer weight and 350 pounds tongue weight. A notable boundary is explicit: vertical hanging bike racks are not supported, so rack style matters before choosing.

Skip it if you use a vertical hanging bike rack; the CURT 13703 lists bike-rack compatibility without that stated restriction.

Choose this ALMULOO for an RV frame within its 7-inch fit and a buyer wanting direct bolt-on adjustment. Its 2-inch receiver handles listed accessories, but vertical hanging bike racks are excluded.

Listed on Amazon as: Adjustable RV Trailer Hitch 2" Class 3, RV Tow Receiver Hitch Fits

#5

5. KUAFU Travel Trailer Hitch

• Maximum Towing Capacity: 350 lb
• Compatible with Vehicle Type: Marine-Personal-Craft, Trailer

Best for: Frame hitch with class options.

Why it ranks #5: Designed for travel trailers and fifth wheels, with a 2-inch receiver; its listing distinguishes 200-pound tongue capacity bolted as Class I from 300–350 welded as Class II.

The KUAFU GO-1241 distinguishes its frame hitch by offering separate tongue-weight figures for bolted Class I and welded Class II installation. It creates a 2-inch receiver for travel trailers and fifth wheels, with listed uses including boats, popup campers, trailers, and bikes.

For Class I installation, the hitch bolts onto the frame and lists a maximum tongue weight of 200 pounds; for Class II, it is welded to the frame and lists 300 to 350 pounds. That makes attachment method a central decision, not just a mounting detail. The 2-inch receiver suits the listed trailer and bike uses, while its steel construction and powder-coated finish are specified for the hitch. The product description also mentions towing a vehicle during trouble.

Skip it if you want a bolt-on receiver with a stated 350-pound tongue rating; the ALMULOO AI-2445 lists direct bolt-on installation.

The GO-1241 suits buyers choosing a frame-mounted hitch for a travel trailer or fifth wheel who can select bolting or welding. Its listed tongue rating changes by class, so installation method matters.

Listed on Amazon as: KUAFU 2" Towing Hitch Receiver for Travel Trailers and Fifth Wheels

#6 · Highest Listed Capacity

6. METOWARE RV Bumper Receiver

• Maximum Towing Capacity: 3500 lb
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Car, RV, Truck

Best for: Higher-capacity four-inch bumper hitch.

Why it ranks #6: Fits a 4-inch square bumper and lists 3,500-pound capacity and 350-pound tongue weight, but verify bumper suitability for the intended towing load.

A stated 350-pound tongue-weight capacity distinguishes the METOWARE receiver for a standard 4-inch square bumper. Its 2-by-2-inch interface is listed as compatible with most Class III or IV ball mounts, bike racks, tow vehicles, and tow cargo, with a 3,500-pound maximum towing-capacity specification.

The 2-inch receiver is intended for standard 2-by-2-inch trailer-hitch accessories, including most Class III/IV ball mounts, bike racks, tow vehicles, and tow cargo. METOWARE specifies a 4-inch square bumper fit, helping buyers identify the mounting location, and gives ratings of 3,500 pounds maximum towing capacity and 350 pounds tongue weight. High-strength steel and alloy-steel material specifications support the stated heavy-duty construction; the supplied facts do not give a more detailed installation method.

Skip it if you need a listed bolt-on installation method and a 4-to-4.5-inch beam fit; Nilight 92116B specifies both.

This METOWARE suits buyers with a standard 4-inch square bumper seeking a 2-inch receiver and the listed 3,500-pound and 350-pound ratings. Installation method is not specified in the supplied details.

Listed on Amazon as: RV Bumper Hitch Receiver Fits 4" Square Bumper, 3500 LBS Capacity

#7

7. Fioracl Adjustable Bumper Hitch

• Maximum Towing Capacity: 3500 lb
• Material Type: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Adjustable-width bumper accessory mount.

Why it ranks #7: Adjusts to different steel-beam widths and heights and lists 3,500-pound capacity; its bumper-mounted design calls for confirming the intended use and limits.

An adjustable locking fit for different steel-beam widths and heights is the Fioracl receiver’s key distinction. The design is intended to clamp tightly to the beam to reduce movement, while its standard 2-inch opening accepts common bike racks, cargo carriers, hitch steps, and RV tire racks.

The adjustable function addresses variation in steel-beam width and height, and the product description says it locks the beam tightly to prevent shaking. That can help accessory users seeking a less fixed bumper fit than a receiver made for one stated beam range. A standard 2-by-2-inch opening supports compatible racks, carriers, steps, and tire racks. The listing gives a 3,500-pound maximum towing-capacity specification, but does not provide a more detailed installation or beam-size range here.

Skip it if you require a stated bumper-width range before choosing; the TOPTOW 63801 lists a 4-to-4.5-inch beam fit.

Pick the Fioracl when an adjustable bumper-beam fit and a 2-inch accessory receiver are priorities. The supplied details do not state a numeric beam-width range, so buyers needing one should favor a model with a specified range.

Listed on Amazon as: RV Bumper Hitch Receiver 2 inch Adapter for 2.5 inch to 4 inch Beams, Trailer Hitch Receiver, Fits for Cargo Carrier Bike Racks

#8

8. Nilight RV Bumper Hitch

• Material Type: Alloy Steel, Carbon Steel
• Compatible with Vehicle Type: Trailer

Best for: Bolt-on 4-to-4.5-inch bumper rack.

Why it ranks #8: Fits 4- to 4.5-inch beams and lists 2,000-pound gross trailer weight with 200-pound tongue weight; the listing emphasizes carrying an approved rack.

The Nilight receiver pairs a 2-by-2-inch opening with a bolt-on fit for 4-to-4.5-inch RV bumper beams, making it a defined option for compatible bike racks and cargo carriers. Its listed limits are 2,000 pounds gross trailer weight and 200 pounds tongue weight, subject to the lowest-rated component.

A 2-inch-shank accessory fits the standard receiver opening, so the hitch can carry most compatible bike racks and cargo carriers. The bolt-on construction is specified for bumper beams 4 to 4.5 inches wide, helping buyers check the mounting location against the listed range before installation. Nilight states a 2,000-pound gross trailer weight and 200-pound tongue weight, with capacity limited by the lowest-rated towing component; those ratings should not be treated as permission to exceed other limits.

Skip it if you need an adjustable fit across varying beam widths; the Fioracl receiver lists adjustable width and height.

This Nilight fits owners with a 4-to-4.5-inch bumper beam who want a bolt-on receiver for compatible racks or carriers. Its stated 200-pound tongue limit and lowest-component rule define the load boundary.

Listed on Amazon as: Nilight RV Bumper Hitch Receiver Fits for 4-4.5 inches Beams 2 inch Receiver 200 LBS Capacity Bolt-On Heavy Duty Steel for Camper Bike Racks Cargo Carriers

#9

9. TOPTOW RV Bumper Hitch

• Maximum Towing Capacity: 200 lb
• Material Type: Metal
• Compatible with Vehicle Type: travel trailer RV

Best for: Steel-bumper accessory carrier.

Why it ranks #9: Fits 4- to 4.5-inch continuous steel bumpers with a 2-inch receiver and 200-pound tongue capacity, but is explicitly not intended for trailer towing.

Four full-threaded bolts and nuts let the TOPTOW receiver mount to continuous steel RV bumpers measuring 4 to 4.5 inches, adding a standard 2-inch opening for compatible accessories. Its stated 200-pound tongue-weight capacity suits carrying gear such as a bike rack or cargo carrier, not towing an RV-level trailer.

The 2-by-2-inch receiver accepts most bike racks and cargo carriers with a 2-inch shank, so owners can use common hitch-mounted accessories rather than a specialized interface. Four threaded bolts and nuts support a bolt-on installation on continuous steel bumper beams from 4 to 4.5 inches wide. The listed 200-pound tongue-weight capacity sets a clear load boundary for accessory use; TOPTOW explicitly says this receiver is not intended for RV-level trailer towing.

Skip it if you need a receiver for RV-level trailer towing; TOPTOW explicitly limits this model to accessory use.

Choose this TOPTOW for a travel trailer with a continuous 4-to-4.5-inch steel bumper and a 2-inch-shank bike rack or cargo carrier. Its stated role is accessory carrying, not RV-level trailer towing.

Listed on Amazon as: TOPTOW RV Bumper Hitch Receiver for 4in to 4.5in Beams, 2in Receiver | Fits for Bike Racks, Cargo Carriers Camper-on

#10

10. MaxxHaul 50173 Receiver

• Material Type: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Four-inch bumper accessory receiver.

Why it ranks #10: Fits a 4-inch square RV bumper and offers a 2-inch accessory receiver with 200-pound tongue capacity; its listing says it is not for RV-level trailer towing.

The MaxxHaul 50173 adds a 2-by-2-inch receiver to a 4-inch square RV bumper, giving compatible 2-inch-shank accessories a mounting point. Its 200-pound tongue-weight capacity suits listed uses such as bike racks, tire carriers, and hitch steps, but the supplied description rules out RV-level trailer towing.

A standard 2-inch opening accepts hitch-mounted accessories including bike racks, RV tire carriers, and hitch steps, so owners can add rear storage or carry equipment on a compatible bumper. The specified fit is a 4-inch square RV bumper, a narrower target than models listing a broader bumper range. MaxxHaul states a 200-pound tongue-weight capacity and explicitly says the receiver is not meant for RV-level trailer towing; cargo-carrier use also carries a caution in the supplied description.

Skip it if you have a 4-to-4.5-inch continuous steel bumper; the TOPTOW 63801 lists that beam range.

The MaxxHaul suits an owner with a 4-inch square RV bumper seeking a receiver for compatible bike racks, tire carriers, or steps. Its accessory role and 200-pound tongue rating are important boundaries.

Listed on Amazon as: MaxxHaul 50173 Hitch Receiver 2" x 2" Adapter for 4 inch Square RV Bumpers