Best Trailer Mover For Tractor: Compare 3-Point and SSQA Options

Best Trailer Mover For Tractor

A strong trailer mover for a tractor should match the tractor’s hitch system, trailer connection, and intended maneuvering load; that makes a 3-point receiver a practical choice for many Category 1 owners. This roundup compares three-point attachments, an SSQA loader attachment, a Category 2 gooseneck mover, and wheeled dollies, so buyers can separate tractor-mounted tools from alternatives that do not attach to a tractor. The SUNSHINE FARMRE combines Category 1 and quick-hitch compatibility with a standard 2-inch receiver and a listed 3,000-pound maximum towing capacity.

Other options add features such as tri-ball fittings, D-rings, SSQA mounting, or high dolly capacities. Check your hitch category and trailer coupler before choosing; a familiar receiver size alone does not guarantee the attachment fits your tractor.

The SUNSHINE FARMRE 3-Point Hitch is the leading choice for a Category 1 tractor owner seeking a tractor-mounted trailer mover. It is specified as compatible with Category 1 tractors and Category 1 quick hitches, uses a standard 2-inch receiver, and lists a 3,000-pound maximum towing capacity. Those details make it a particularly clear fit among the listed products.

Buyers with Category 2 equipment, an SSQA loader, or a need for a wheeled dolly should instead match their setup to the alternatives below.

Our Top Picks

SUNSHINE FARMRE 3-Point HitchBest Overall

SUNSHINE FARMRE 3-Point Hitch

Category 1 and quick-hitch compatible, with a standard 2-inch receiver and a listed maximum towing capacity of 3,000 pounds.

View on Amazon
ECOTRIC Category 1 HitchBroad Tractor Fit

ECOTRIC Category 1 Hitch

Its Category 1 three-point receiver is listed for Kubota, Yanmar, Kioti, John Deere, and other tractor brands; weight is 26.5 pounds.

View on Amazon
Sulythw Category 1 DrawbarReinforced Receiver

Sulythw Category 1 Drawbar

This Category 1 receiver is redesigned for quick-hitch compatibility, with a reinforced receiving port and a closed top gap to limit water accumulation.

View on Amazon

Compare trailer movers by tractor and trailer setup

#ProductWeightMaterialCompatible with Vehicle TypeBuy
119 lbAlloy SteelTractorView on Amazon
226.5 lbMetalTractorView on Amazon
3——TractorView on Amazon
4—Alloy SteelTractor, TrailerView on Amazon
595 lb——View on Amazon
6
Tarter 200 Series Mover6. Tarter 200 Series MoverTrailer and wagon hookups
———View on Amazon
7
NUOVEPE Trailer Dolly7. NUOVEPE Trailer DollyStandalone trailer positioning
48.9 lb——View on Amazon
8
Generic Tri-Wheel Dolly8. Generic Tri-Wheel DollyAdjustable-height dolly users
—Iron—View on Amazon

Detailed Reviews: Best Trailer Mover For Tractor

SUNSHINE FARMRE 3-Point Hitch

#1 · Best Overall

1. SUNSHINE FARMRE 3-Point Hitch

  • Weight: 19 lb
  • Material: Alloy Steel
  • Compatible with Vehicle Type: Tractor

Best for: Quick-hitch Category 1 users.

Why it ranks #1: Category 1 and quick-hitch compatible, with a standard 2-inch receiver and a listed maximum towing capacity of 3,000 pounds.

Compatibility with both Category 1 tractors and Category 1 quick hitches lets this receiver fit buyers who want a quicker three-point hookup. The standard 2-inch receiver accepts trailer or implement connections, and the listed 3,000-pound maximum towing capacity gives a stated load boundary.

Category 1 quick-hitch compatibility can streamline mounting for tractors already using that system, while the 7/8-inch Category 1 lifting pins specify the attachment interface. Once mounted, its standard 2-inch receiver accepts compatible trailer or implement connections for moving equipment around a farm or worksite. The stated maximum towing capacity is 3,000 pounds, which gives buyers a concrete upper limit to consider against their intended load. Alloy steel construction is also specified.

Pros
  • Compatible with Category 1 quick hitches
  • 7/8-inch Category 1 lifting pins
  • Standard 2-inch receiver
  • 3,000-pound maximum towing capacity
Cons
  • The stated maximum towing capacity is 3,000 pounds.

Skip it if you need Category 2 pins or a stated capacity above 3,000 pounds; this receiver is specified for Category 1 and 3,000 pounds maximum.

This SUNSHINE FARMRE receiver fits Category 1 tractor owners using a compatible quick hitch and moving loads within its 3,000-pound maximum. Check the tractor’s pin category and the intended load before choosing it.

Full product details
BrandSUNSHINE FARMRE
Compatible with Vehicle TypeTractor
Included Components1*3 Point Hitch
Item Weight19 pounds
ManufacturerSUNSHINE FARMRE
Part NumberSF-PL-7011
Manufacturer Warranty Description3 Year Warranty
MaterialAlloy Steel
Maximum Towing Capacity3000 pounds
Model NumberSF-PL-7011

Listed on Amazon as: 3 Point 2" Trailer Hitch Receiver Compatible with Quick Hitch for Category 1 Tractors, Heavy Duty Tractor Mover Drawbar, Farm Equipment and Subcompact Trailer Hitch for Tractor Standard Cat 1(Black)

View on Amazon
ECOTRIC Category 1 Hitch

#2 · Broad Tractor Fit

2. ECOTRIC Category 1 Hitch

  • Weight: 26.5 lb
  • Material: Metal
  • Compatible with Vehicle Type: Tractor

Best for: Category 1 tractor owners.

Why it ranks #2: Its Category 1 three-point receiver is listed for Kubota, Yanmar, Kioti, John Deere, and other tractor brands; weight is 26.5 pounds.

Broadly listed compatibility with Category 1 three-point systems and tractor brands including Kubota, Yanmar, Kioti, Cat, and John Deere makes this ECOTRIC hitch a flexible replacement drawbar. Its 2-inch receiver enables compatible tractors to connect a range of receiver-style trailer or equipment attachments.

The Category 1 three-point fit connects the hitch at the tractor’s rear suspension, while the standard 2-inch receiver provides a familiar connection for receiver-style accessories. Listed compatibility spans Kubota BX, LM25H and WLM tractors, plus NorTrac, Yanmar, Kioti, Cat, and John Deere equipment, helping buyers assess whether it suits their fleet. At 26.5 pounds, it is a comparatively manageable attachment to handle during installation or storage. The package includes one receiver hitch.

Pros
  • Category 1 three-point suspension compatibility
  • Standard 2-inch receiver
  • Listed compatibility with multiple tractor brands
  • 26.5-pound item weight
Cons
  • Its listed fit is for Category 1 systems, not Category 2 tractor mounts.

Skip it if you need a Category 2 mount for gooseneck or fifth-wheel connections; the Generic Category 2 mover includes those features.

Pick the ECOTRIC when a Category 1 tractor and standard 2-inch receiver are the core requirements, especially across the listed brands. Its fit is not Category 2, so match the hitch to the tractor’s three-point system.

Full product details
BrandECOTRIC
Compatible with Vehicle TypeTractor
Included ComponentsA Receiver Trailer Hitch
Item Weight26.5 pounds
ManufacturerFAMETRADE LLC
Part NumberLYA-030-Z1
Manufacturer Warranty DescriptionNO
MaterialMetal
Model NumberVC-LYA-030S

Listed on Amazon as: ECOTRIC 3 Point 2" Receiver Trailer Hitch Category 1 Tractor Mover Drawbar Hitch Heavy Duty Compatible with Kubota BX LM25H WLM Tractor NorTrac Yanmar Kioti Cat John Deere

View on Amazon
Sulythw Category 1 Drawbar

#3 · Reinforced Receiver

3. Sulythw Category 1 Drawbar

  • Compatible with Vehicle Type: Tractor

Best for: Quick-hitch stabilizer buyers.

Why it ranks #3: This Category 1 receiver is redesigned for quick-hitch compatibility, with a reinforced receiving port and a closed top gap to limit water accumulation.

Quick-hitch compatibility and a receiver that acts as a stabilizer make this Sulythw drawbar a practical choice for Category 1 tractor owners seeking a steadier 2-inch hitch connection. Its reinforced receiving port and closed top gap address durability and water accumulation, while chain use is supported for added stability.

The redesigned quick-hitch compatibility can simplify mounting on a matching Category 1 tractor system, and the receiver is described as a stabilizer for a variety of 2-inch hitches. A reinforced receiving port and solid iron block are specified to resist bending, while the closed top gap helps avoid water accumulation. The hitch can be used with a chain for more stability, but the chain is not included, so that part of the setup requires a separate item.

Pros
  • Quick-hitch compatible Category 1 drawbar
  • Receiver acts as a stabilizer for 2-inch hitches
  • Reinforced port and solid iron block
  • Closed top gap helps avoid water accumulation
Cons
  • The chain for added stability is not included.

Skip it if you want a chain included for added stability; this Sulythw listing says the chain is not included.

Choose this Sulythw when Category 1 quick-hitch mounting and a stabilizing 2-inch receiver suit your tractor setup. Factor in that any chain used for added stability must be obtained separately.

Full product details
BrandSulythw
Compatible with Vehicle TypeTractor
Included ComponentsReceiver
ManufacturerSulythw
Part NumberSA-0031
Manufacturer Warranty Description2 Year
Model NumberSA-0031

Listed on Amazon as: 3 Point Hitch Receiver Quick Hitch Compatible, Cat.1 Tractor Mover Draw Bar

View on Amazon
Generic Category 2 Mover

#4 · Gooseneck Ready

4. Generic Category 2 Mover

  • Material: Alloy Steel
  • Compatible with Vehicle Type: Tractor, Trailer

Best for: Category 2 gooseneck movers.

Why it ranks #4: The Category 2 frame has 1-1/8-inch lower lift pins and includes a gooseneck and fifth-wheel sleeve, 2-inch receiver, tri-ball, and two D-rings.

The Category 2 frame combines a gooseneck and fifth-wheel sleeve with a 2-inch receiver and tri-ball, enabling one tractor-mounted mover to handle several hitch styles. Two D-rings add attachment points, while the lower lift pins measure 1-1/8 inches for Category 2 setups.

The Category 2 frame and 1-1/8-inch lower lift pins establish the tractor connection, while the gooseneck and fifth-wheel sleeve targets larger trailer coupling styles. Its 2-inch receiver and included tri-ball give operators additional hitch options without relying on a single connection type. Two D-rings add places to secure or handle equipment. Heavy-duty thickwall tubing is specified, but the listing does not state a towing-capacity figure, so workload decisions must account for that limit in available information.

Pros
  • Category 2 frame and lower lift pins
  • Gooseneck and fifth-wheel sleeve
  • 2-inch receiver with tri-ball included
  • Two D-rings
Cons
  • The listing provides no towing-capacity figure for evaluating a specific load.

Skip it if you have a Category 1 tractor; the ECOTRIC 3 Point 2-inch Receiver Trailer Hitch is listed for Category 1 compatibility.

This mover suits Category 2 tractor owners who need gooseneck or fifth-wheel connections alongside a receiver and tri-ball. Check that its Category 2 lift-pin dimensions match your tractor, and note the listing gives no capacity figure.

Full product details
BrandGeneric
Compatible with Vehicle TypeTractor, Trailer
ManufacturerBell Precision Tool, LLC
Part NumberTM3PGN5WC2
MaterialAlloy Steel

Listed on Amazon as: 3 Point Gooseneck & Fifthwheel Trailer Mover, Category 2

View on Amazon
KIVEL SSQA Trailer Mover

#5 · Loader-Mounted

5. KIVEL SSQA Trailer Mover

  • Weight: 95 lb

Best for: Quick-attach tractor operators.

Why it ranks #5: Its SSQA mounting plate suits compatible skid steers or tractors with a loader, and the mover accepts a standard 2-inch receiver.

The SSQA mounting plate lets compatible skid steers and tractors attach or detach this trailer spotter without a separate hitching interface. Its standard 2-inch receiver supports a wide range of trailers, making it a practical yard attachment for operators who want to reposition trailers using their loader.

The universal SSQA plate connects the mover to compatible equipment, so attachment changes can use the loader’s quick-attach system. A standard 2-inch receiver accepts common trailer hitch connections, broadening the types of trailers it can spot. Kivel describes this as a standard-duty attachment for standard applications, which helps set its intended workload boundary. At 95 pounds, it is a substantial implement to handle when storing or changing attachments.

Pros
  • SSQA mounting plate for compatible equipment
  • Standard 2-inch receiver
  • Compatible with skid steers or tractors
  • Manufactured in the USA
Cons
  • Its standard-duty construction is intended for standard applications, not a stated heavy-duty workload.

Skip it if you need a Category 2 three-point mount for gooseneck and fifth-wheel trailers; the Generic Category 2 mover provides those connections.

Choose this Kivel for yard spotting when your tractor or skid steer has an SSQA plate and your trailer uses a standard 2-inch receiver. Its stated standard-duty construction makes application demands an important boundary.

Full product details
BrandKIVEL
Item Weight‎95 pounds
Manufacturer‎Kivel Manufacturing
Package Dimensions‎45.5 x 19 x 15 inches

Listed on Amazon as: Kivel Skid Steer/Tractor Trailer Mover-SSQA Trailer Spotter

View on Amazon
Tarter 200 Series Mover

#6

6. Tarter 200 Series Mover

Best for: Trailer and wagon hookups.

Why it ranks #6: This mover hauls trailers and wagons weighing up to 3,000 pounds and has a 2-inch receiver, but the listing gives no tractor hitch-mount details.

The Tarter 200 Series hauls trailers and wagons weighing up to 3,000 pounds, giving tractor operators a defined load limit for routine moving. Its easy hookup-and-go system avoids raising and lowering landing gear, while the 2-inch receiver accepts a hitch for pin-drop wagons or ball-mount trailers.

The easy hookup-and-go arrangement is intended to reduce time spent raising and lowering landing gear during connection. A 2-inch receiver accepts a hitch for pin-drop wagons or ball-mount trailers, offering two listed connection paths for common moving jobs. The stated 3,000-pound limit applies to trailers and wagons, making it an important check before use. The listing also gives dimensions of 28 inches high, 33 inches wide, and 8-1/4 inches long for planning storage or clearance.

Pros
  • Hauls trailers and wagons up to 3,000 pounds
  • Easy hookup-and-go system
  • 2-inch receiver
  • Accepts pin-drop wagon or ball-mount trailer hitch
Cons
  • Its stated hauling limit is 3,000 pounds.

Skip it if you need to move loads above 3,000 pounds; the NUOVEPE dolly lists a 20,000-pound trailer GVWR rating, though it is not tractor-mounted.

The Tarter suits tractor operators moving trailers or wagons within 3,000 pounds who value its hookup-and-go workflow. Check the load limit and the listed dimensions against your equipment and storage space.

Full product details
BrandGeneric
Manufacturer‎Generic

Listed on Amazon as: Tarter TM20BL 200 Series Trailer Mover, Black

View on Amazon
NUOVEPE Trailer Dolly

#7

7. NUOVEPE Trailer Dolly

  • Weight: 48.9 lb

Best for: Standalone trailer positioning.

Why it ranks #7: This is a wheeled alternative rather than a tractor attachment; it lists 3,500 pounds of tongue weight and trailers up to 20,000 pounds GVWR.

A 3,500-pound tongue-weight rating and compatibility with trailers rated up to 20,000 pounds GVWR let this dolly target heavy trailer positioning without a vehicle. Its 2-inch hitch ball supports connection to matching trailers, while the widened triangular base is specified to improve balance during movement.

The 2-inch ball connects trailers with a matching coupler, and the dolly’s stated 3,500-pound tongue-weight support and 20,000-pound GVWR rating define its listed capacity range. A widened triangular base is intended to help balance the load as you maneuver in garages, driveways, storage areas, or outdoor spaces. Solid polyurethane wheels are described as providing smooth rolling across concrete, supporting controlled repositioning on that surface. This is a standalone dolly rather than a tractor-mounted attachment.

Pros
  • Supports up to 3,500 pounds tongue weight
  • For trailers rated up to 20,000 pounds GVWR
  • 2-inch hitch ball
  • Solid polyurethane wheels and widened triangular base
Cons
  • It is a standalone dolly, not a tractor-mounted trailer mover.

Skip it if you want a tractor-mounted receiver instead of a standalone dolly; the ECOTRIC Category 1 hitch attaches to a tractor’s three-point system.

Choose the NUOVEPE for positioning a matching 2-inch-ball trailer in storage areas or driveways without a vehicle. It is a standalone dolly, so it will not provide a tractor-mounted hitch connection.

Full product details
BrandNUOVEPE
Item Weight‎48.9 pounds
Manufacturer‎NUOVEPE
Part Number‎NU1755
Package Dimensions‎32 x 23.75 x 7.25 inches

Listed on Amazon as: Trailer Dolly, Heavy Duty Trailer Mover with 2 Inch Hitch Ball

View on Amazon
Generic Tri-Wheel Dolly

#8

8. Generic Tri-Wheel Dolly

  • Material: Iron

Best for: Adjustable-height dolly users.

Why it ranks #8: The hand-positioned dolly lists an 800-pound capacity and adjustable 18-to-25-inch height, but it does not mount to a tractor.

Adjustable height from 18 to 25 inches lets this tri-wheel dolly adapt its hitch position for different trailer setups. Its 800-pound capacity and 2-inch hitch ball define the load and connection boundaries, while a wide wheelbase is specified to improve stability, especially during turns.

The 18-to-25-inch adjustable height helps position the hitch ball at a suitable level for a trailer, while the 2-inch ball sets the required coupler connection. A wide wheelbase is intended to add stability through turns, and the solid steel frame with hammer-tone powder finish is specified to resist corrosion. Its stated 800-pound capacity limits the loads it can handle. The tri-wheel layout and included wheels make it a manually moved dolly rather than a tractor-mounted attachment.

Pros
  • Adjustable 18-to-25-inch height
  • 2-inch hitch ball
  • 800-pound capacity
  • Wide wheelbase and coated solid-steel frame
Cons
  • Its stated capacity is limited to 800 pounds.

Skip it if you need a dolly rated above 800 pounds; the NUOVEPE lists 3,500 pounds tongue-weight capacity for heavier trailer positioning.

This tri-wheel dolly fits buyers who need adjustable hitch height for a trailer within 800 pounds and value a wide wheelbase for turns. It is not a tractor-mounted mover, and its capacity is the key boundary.

Full product details
BrandGeneric
Included ComponentsWheels
ManufacturerJHshop
Part NumberRIVJHW2019P396191
Manufacturer Warranty Description6 Month
MaterialIron
Model NumberRXZJH100W2019P396191

Listed on Amazon as: Heavy Duty Trailer Mover, Tri-Wheels – Adjustable 18"-25" H, 2" Hitch Ball – Move Trailers, RV, Boat, Riding Mower, Farming Equipment & Utility Trailers Easily, Farm Equipment Mover, Shed Storage

View on Amazon

Avoid hitch-category and coupler mismatches

A matching receiver opening does not prove that a mover fits your tractor or trailer. The SUNSHINE FARMRE and ECOTRIC are Category 1 three-point options, while the Generic Category 2 Mover has 1-1/8-inch lower lift pins; these hitch categories are not interchangeable by assumption. The KIVEL SSQA Trailer Mover uses a skid-steer quick-attach plate instead of a three-point frame, so it requires compatible loader mounting hardware.

On the trailer side, several products list a 2-inch receiver, but that is a receiver opening for a hitch accessory, not a statement that every trailer coupler fits directly. The Generic Category 2 Mover includes a tri-ball and gooseneck/fifth-wheel sleeve; other products may require a separate, correctly matched hitch.

Confirm tractor hitch category, attachment interface, pin dimensions, and trailer connection before purchasing.

Separate tractor attachments from wheeled dollies

A wheeled dolly and a tractor-mounted mover solve different positioning problems, even when both list substantial trailer capacities. The NUOVEPE Trailer Dolly is intended to move trailers without needing a vehicle and lists up to 3,500 pounds tongue weight and 20,000 pounds GVWR. The Generic Tri-Wheel Dolly instead lists an 800-pound capacity and adjustable 18-to-25-inch height.

Neither listing describes a tractor attachment. Tractor-mounted products transfer the maneuvering task to a tractor’s three-point hitch or loader interface, which may suit a buyer who already has compatible equipment.

But a product’s capacity figure alone does not establish safe use on a slope, soft ground, or uneven surface. Treat the listed capacity as only one selection detail, and follow the maker’s instructions for loading, coupling, and operating conditions.

How to Choose a Tractor Trailer Mover

Tractor mounting interface

Look first for the attachment interface that matches your tractor. The SUNSHINE FARMRE and ECOTRIC are Category 1 three-point hitches; SUNSHINE FARMRE also states Category 1 quick-hitch compatibility. The Generic Category 2 Mover instead specifies a Category 2 frame and 1-1/8-inch lower lift pins.

KIVEL uses an SSQA plate for compatible loader equipment, while the Sulythw is a Category 1 receiver redesigned for quick-hitch compatibility. Choose a Category 1 three-point option if that is your tractor’s setup; a Category 2 owner should consider the Category 2 mover.

Select SSQA only when your loader actually has the matching interface.

Trailer connection and included fittings

Choose a mover whose receiver and supplied fittings match the trailer you need to position. The SUNSHINE FARMRE, ECOTRIC, Sulythw, and KIVEL listings specify a 2-inch receiver, but do not all list the same included hitch accessories. The Generic Category 2 Mover explicitly includes a gooseneck and fifth-wheel sleeve, tri-ball, and two D-rings.

The Tarter 200 Series has a 2-inch receiver and its description mentions a 2 5/16-inch gooseneck connection. Buyers moving varied trailer types may favor the Category 2 package’s fittings; buyers with a specific receiver hitch should verify what additional ball mount or pin they need before choosing another attachment.

Capacity and attachment weight

Compare capacity claims only after confirming the product type and tractor fit. SUNSHINE FARMRE lists a 3,000-pound maximum towing capacity, and the Tarter description says it hauls trailers and wagons weighing up to 3,000 pounds. The NUOVEPE dolly specifies 3,500 pounds tongue weight and trailers rated up to 20,000 pounds GVWR, while the other dolly lists an 800-pound capacity; these figures describe different products and should not be treated as equivalent tractor-mover ratings.

Listed attachment weights also vary: SUNSHINE FARMRE is 19 pounds, ECOTRIC 26.5 pounds, KIVEL 95 pounds, and NUOVEPE 48.9 pounds. Buyers should prioritize a documented capacity for their use and a manageable attachment for their equipment.

Which Trailer Mover Fits Your Tractor?

For most Category 1 tractor owners, choose the SUNSHINE FARMRE 3-Point Hitch: it fits Category 1 tractors and quick hitches, has a 2-inch receiver, and lists a 3,000-pound maximum towing capacity. If you want a Category 1 option listed for a wide range of tractor brands, consider the ECOTRIC Category 1 Hitch; its compatibility details name several manufacturers. Choose the Generic Category 2 Mover for a Category 2 tractor and gooseneck or fifth-wheel use, since it includes the relevant sleeve and tri-ball.

If your tractor has a compatible SSQA loader, the KIVEL SSQA Trailer Mover is the loader-mounted option. The NUOVEPE Trailer Dolly suits buyers who want a non-tractor alternative with a high listed trailer GVWR.

Confirm fit and connection details before ordering.

Frequently Asked Questions

How do I identify whether my tractor uses a Category 1 or Category 2 three-point hitch?

Check the tractor’s manual or hitch identification information for its category, and confirm with the manufacturer or dealer if it is unclear. Category 1 and Category 2 use different hitch dimensions, so do not rely on the tractor’s size or appearance alone. Verify that the mover’s stated category matches your tractor and quick hitch, if used.

How should I match a trailer mover’s receiver or ball mount to my trailer coupler?

Match the ball size to the coupler marking, or confirm that the receiver and selected mount are compatible with the coupler setup. The leading Category 1 mover lists a standard 2-inch receiver, while the dolly title specifies a 2-inch hitch ball; these are different connection details. Check fit and capacity before connecting.

What ground conditions and slopes are safe for moving a trailer with a tractor or dolly?

Use firm, level ground where the tractor or dolly can maintain control, and avoid soft, slippery, uneven surfaces or slopes that could cause loss of traction or trailer movement. Keep the route clear and move slowly. If conditions make stable control uncertain, do not move the trailer until you can use a safer route or setup.

Which listed mover should I consider for a Category 2 tractor?

The Generic Category 2 Mover is the listed option for Category 2 equipment and gooseneck or fifth-wheel use; the editorial verdict says it includes the relevant sleeve and tri-ball. Confirm that its hitch connection and included components suit your tractor and trailer before ordering, rather than assuming a Category 1 mover will fit.

What should I verify before ordering a tractor-mounted trailer mover?

Confirm your tractor’s hitch category, whether you use a quick hitch or SSQA loader, and the mover’s receiver or ball connection. Compare those details with your trailer coupler and intended use, then check the listed capacity and any fit requirements. The SUNSHINE FARMRE option specifies Category 1 compatibility, a 2-inch receiver, and a 3,000-pound maximum towing capacity.

Final Words

For a Category 1 tractor owner, the SUNSHINE FARMRE 3-Point Hitch is the clearest match: it specifies Category 1 tractor and quick-hitch compatibility, a 2-inch receiver, and a 3,000-pound maximum towing capacity. Choose the Category 2 mover for Category 2 and gooseneck or fifth-wheel use, or the KIVEL for a compatible SSQA loader. For a non-tractor setup, consider the NUOVEPE dolly.

Confirm fit and connection details before ordering.

Leave a Reply

Your email address will not be published. Required fields are marked *